Sync from SUSE:ALP:Source:Standard:1.0 libcontainers-common revision 2b8604581766e701a5a2766cb2115619

0001-containers.conf-SUSE-clear-cni-config-dir-for-ALP.patch

@@ -0,0 +1,37 @@
+From 817674bc542d7169c3d3ca687988c8619a210372 Mon Sep 17 00:00:00 2001
+From: danishprakash <danish.prakash@suse.com>
+Date: Wed, 10 Apr 2024 13:21:08 +0530
+Subject: [PATCH] containers.conf: SUSE: clear cni config dir for ALP
+
+This allows us to clear the cni_plugin_dirs when building
+for SUSE ALP since we don't ship cni anymore.
+
+https://github.com/containers/podman/issues/19327
+
+SUSE Bugs: bsc#1213556
+Signed-off-by: danishprakash <danish.prakash@suse.com>
+---
+ pkg/config/containers.conf | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/pkg/config/containers.conf b/pkg/config/containers.conf
+index 6e0044f6..e1b1b280 100644
+--- a/pkg/config/containers.conf
++++ b/pkg/config/containers.conf
+@@ -331,6 +331,13 @@ default_sysctls = [
+ 
+ # Path to directory where CNI plugin binaries are located.
+ #
++
++# SUSE: We don't ship CNI in SUSE ALP stream,
++# and so we modify this option at build time
++# conditionally. (bsc#1213556)
++# https://github.com/containers/podman/issues/19327
++cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
++
+ #cni_plugin_dirs = [
+ #  "/usr/local/libexec/cni",
+ #  "/usr/libexec/cni",
+-- 
+2.43.0
+

_service

@@ -3,7 +3,7 @@
     <param name="url">https://github.com/containers/storage.git</param>
     <param name="scm">git</param>
     <param name="filename">storage</param>
-    <param name="revision">v1.51.0</param>
+    <param name="revision">v1.53.0</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="versionrewrite-pattern">v(.*)</param>
   </service>
@@ -11,7 +11,7 @@
     <param name="url">https://github.com/containers/image.git</param>
     <param name="scm">git</param>
     <param name="filename">image</param>
-    <param name="revision">v5.29.2</param>
+    <param name="revision">v5.30.0</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="versionrewrite-pattern">v(.*)</param>
   </service>
@@ -19,7 +19,7 @@
     <param name="url">https://github.com/containers/common.git</param>
     <param name="scm">git</param>
     <param name="filename">common</param>
-    <param name="revision">v0.57.4</param>
+    <param name="revision">v0.58.0</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="versionrewrite-pattern">v(.*)</param>
   </service>

containers.conf

@@ -10,7 +10,8 @@
 # locations in the following order:
 #  1. /usr/share/containers/containers.conf
 #  2. /etc/containers/containers.conf
-#  3. $HOME/.config/containers/containers.conf (Rootless containers ONLY)
+#  3. $XDG_CONFIG_HOME/containers/containers.conf or
+#     $HOME/.config/containers/containers.conf if $XDG_CONFIG_HOME is not set
 #  Items specified in the latter containers.conf, if they exist, override the
 # previous containers.conf settings, or the default settings.
 
@@ -33,6 +34,11 @@
 #
 #base_hosts_file = ""
 
+# List of cgroup_conf entries specifying a list of cgroup files to write to and
+# their values. For example `memory.high=1073741824` sets the
+# memory.high limit to 1GB.
+# cgroup_conf = []
+
 # Default way to to create a cgroup namespace for the container
 # Options are:
 # `private` Create private Cgroup Namespace for the container.
@@ -52,19 +58,19 @@
 # List of default capabilities for containers. If it is empty or commented out,
 # the default capabilities defined in the container engine will be added.
 #
-default_capabilities = [
-  "CHOWN",
-  "DAC_OVERRIDE",
-  "FOWNER",
-  "FSETID",
-  "KILL",
-  "NET_BIND_SERVICE",
-  "SETFCAP",
-  "SETGID",
-  "SETPCAP",
-  "SETUID",
-  "SYS_CHROOT"
-]
+#default_capabilities = [
+#  "CHOWN",
+#  "DAC_OVERRIDE",
+#  "FOWNER",
+#  "FSETID",
+#  "KILL",
+#  "NET_BIND_SERVICE",
+#  "SETFCAP",
+#  "SETGID",
+#  "SETPCAP",
+#  "SETUID",
+#  "SYS_CHROOT",
+#]
 
 # A list of sysctls to be set in containers by default,
 # specified as "name=value",
@@ -114,7 +120,6 @@ default_sysctls = [
 #
 #env = [
 #  "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
-#  "TERM=xterm",
 #]
 
 # Pass all host environment variables into the container.
@@ -145,8 +150,11 @@ default_sysctls = [
 #init = false
 
 # Container init binary, if init=true, this is the init binary to be used for containers.
+# If this option is not set catatonit is searched in the directories listed under
+# the helper_binaries_dir option. It is recommended to just install catatonit
+# there instead of configuring this option here.
 #
-init_path = "/usr/bin/catatonit"
+#init_path = "/usr/libexec/podman/catatonit"
 
 # Default way to to create an IPC namespace (POSIX SysV IPC) for the container
 # Options are:
@@ -157,6 +165,13 @@ init_path = "/usr/bin/catatonit"
 #
 #ipcns = "shareable"
 
+# Default way to set an interface name inside container. Defaults to legacy
+# pattern of ethX, where X is a integer, when left undefined.
+# Options are:
+#  "device"   Uses the network_interface name from the network config as interface name.
+#             Falls back to the ethX pattern if the network_interface is not set.
+#interface_name = ""
+
 # keyring tells the container engine whether to create
 # a kernel keyring for use within the container.
 #
@@ -168,9 +183,15 @@ init_path = "/usr/bin/catatonit"
 #
 #label = true
 
+# label_users indicates whether to enforce confined users in containers on
+# SELinux systems. This option causes containers to maintain the current user
+# and role field of the calling process. By default SELinux containers run with
+# the user system_u, and the role system_r.
+#label_users = false
+
 # Logging driver for the container. Available options: k8s-file and journald.
 #
-log_driver = "journald"
+#log_driver = "k8s-file"
 
 # Maximum size allowed for the container log file. Negative numbers indicate
 # that no size limit is imposed. If positive, it must be >= 8192 to match or
@@ -185,6 +206,13 @@ log_driver = "journald"
 #
 #log_tag = ""
 
+# List of mounts. Specified as
+# "type=TYPE,source=<directory-on-host>,destination=<directory-in-container>,<options>", for example:
+# "type=bind,source=/var/lib/foobar,destination=/var/lib/foobar,ro".
+# If it is empty or commented out, no mounts will be added
+#
+#mounts = []
+
 # Default way to to create a Network namespace for the container
 # Options are:
 # `private` Create private Network Namespace for the container.
@@ -198,6 +226,10 @@ log_driver = "journald"
 #
 #no_hosts = false
 
+# Tune the host's OOM preferences for containers
+# (accepts values from -1000 to 1000).
+#oom_score_adj = 0
+
 # Default way to to create a PID namespace for the container
 # Options are:
 # `private` Create private PID Namespace for the container.
@@ -216,6 +248,18 @@ log_driver = "journald"
 #
 #prepare_volume_on_create = false
 
+# Give extended privileges to all containers. A privileged container turns off
+# the security features that isolate the container from the host. Dropped
+# Capabilities, limited devices, read-only mount points, Apparmor/SELinux
+# separation, and Seccomp filters are all disabled. Due to the disabled
+# security features the privileged field should almost never be set as
+# containers can easily break out of confinment.
+#
+# Containers running in a user namespace (e.g., rootless containers) cannot
+# have more privileges than the user that launched them.
+#
+#privileged = false
+
 # Run all containers with root file system mounted read-only
 #
 # read_only = false
@@ -261,7 +305,7 @@ log_driver = "journald"
 # If it is empty or commented out, no volumes will be added
 #
 #volumes = []
-#
+
 #[engine.platform_to_oci_runtime]
 #"wasi/wasm" = ["crun-wasm"]
 #"wasi/wasm32" = ["crun-wasm"]
@@ -287,7 +331,30 @@ log_driver = "journald"
 
 # Path to directory where CNI plugin binaries are located.
 #
-cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
+#cni_plugin_dirs = [
+#  "/usr/local/libexec/cni",
+#  "/usr/libexec/cni",
+#  "/usr/local/lib/cni",
+#  "/usr/lib/cni",
+#  "/opt/cni/bin",
+#]
+
+# List of directories that will be searched for netavark plugins.
+#
+#netavark_plugin_dirs = [
+#  "/usr/local/libexec/netavark",
+#  "/usr/libexec/netavark",
+#  "/usr/local/lib/netavark",
+#  "/usr/lib/netavark",
+#]
+
+# The firewall driver to be used by netavark.
+# The default is empty which means netavark will pick one accordingly. Current supported
+# drivers are "iptables", "none" (no firewall rules will be created) and "firewalld" (firewalld is
+# experimental at the moment and not recommend outside of testing). In the future we are
+# planning to add support for a "nftables" driver.
+#firewall_driver = ""
+
 
 # The network name of the default network to attach pods to.
 #
@@ -314,6 +381,13 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #  {"base" = "10.128.0.0/9", "size" = 24},
 #]
 
+
+
+# Configure which rootless network program to use by default. Valid options are
+# `slirp4netns` and `pasta` (default).
+#
+#default_rootless_network_cmd = "pasta"
+
 # Path to the directory where network configuration files are located.
 # For the CNI backend the default is "/etc/cni/net.d" as root
 # and "$HOME/.config/cni/net.d" as rootless.
@@ -329,16 +403,50 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #dns_bind_port = 53
 
+#	A list of default pasta options that should be used running pasta.
+# It accepts the pasta cli options, see pasta(1) for the full list of options.
+#
+#pasta_options = []
+
 [engine]
 # Index to the active service
 #
-#active_service = production
+#active_service = "production"
+
+#List of compression algorithms. If set makes sure that requested compression variant
+#for each platform is added to the manifest list keeping original instance intact in
+#the same manifest list on every `manifest push`. Supported values are (`gzip`, `zstd` and `zstd:chunked`).
+#
+#add_compression = ["gzip", "zstd", "zstd:chunked"]
+
+# Enforces using docker.io for completing short names in Podman's compatibility
+# REST API. Note that this will ignore unqualified-search-registries and
+# short-name aliases defined in containers-registries.conf(5).
+#compat_api_enforce_docker_hub = true
+
+# Specify one or more external providers for the compose command.  The first
+# found provider is used for execution.  Can be an absolute and relative path
+# or a (file) name.
+#compose_providers=[]
+
+# Emit logs on each invocation of the compose command indicating that an
+# external compose provider is being executed.
+#compose_warning_logs = true
 
 # The compression format to use when pushing an image.
 # Valid options are: `gzip`, `zstd` and `zstd:chunked`.
+# This field is ignored when pushing images to the docker-daemon and
+# docker-archive formats. It is also ignored when the manifest format is set
+# to v2s2.
 #
 #compression_format = "gzip"
 
+# The compression level to use when pushing an image.
+# Valid options depend on the compression format used.
+# For gzip, valid options are 1-9, with a default of 5.
+# For zstd, valid options are 1-20, with a default of 3.
+#
+#compression_level = 5
 
 # Cgroup management implementation used for the runtime.
 # Valid options "systemd" or "cgroupfs"
@@ -368,11 +476,20 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 # short-name aliases defined in containers-registries.conf(5).
 #compat_api_enforce_docker_hub = true
 
+# The database backend of Podman.  Supported values are "" (default), "boltdb"
+# and "sqlite". An empty value means it will check whenever a boltdb already
+# exists and use it when it does, otherwise it will use sqlite as default
+# (e.g. new installs). This allows for backwards compatibility with older versions.
+# Please run `podman-system-reset` prior to changing the database
+# backend of an existing deployment, to make sure Podman can operate correctly.
+#
+#database_backend = ""
+
 # Specify the keys sequence used to detach a container.
 # Format is a single character [a-Z] or a comma separated sequence of
 # `ctrl-<value>`, where `<value>` is one of:
 # `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_`
-#
+# Specifying "" disables this feature.
 #detach_keys = "ctrl-p,ctrl-q"
 
 # Determines whether engine will reserve ports on the host when they are
@@ -442,8 +559,8 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #image_parallel_copies = 0
 
-# Tells container engines how to handle the builtin image volumes.
-#   * bind: An anonymous named volume will be created and mounted
+# Tells container engines how to handle the built-in image volumes.
+#   * anonymous: An anonymous named volume will be created and mounted
 #     into the container.
 #   * tmpfs: The volume is mounted onto the container as a tmpfs,
 #     which allows users to create content that disappears when
@@ -458,26 +575,30 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 
 # Infra (pause) container image name for pod infra containers.  When running a
 # pod, we start a `pause` process in a container to hold open the namespaces
-# associated with the  pod.  This container does nothing other then sleep,
-# reserving the pods resources for the lifetime of the pod. By default container
-# engines run a builtin container using the pause executable. If you want override
+# associated with the  pod.  This container does nothing other than sleep,
+# reserving the pod's resources for the lifetime of the pod. By default container
+# engines run a built-in container using the pause executable. If you want override
 # specify an image to pull.
 #
 #infra_image = ""
 
+# Default Kubernetes kind/specification of the kubernetes yaml generated with the `podman kube generate` command.
+# The possible options are `pod` and `deployment`.
+#kube_generate_type = "pod"
+
 # Specify the locking mechanism to use; valid values are "shm" and "file".
 # Change the default only if you are sure of what you are doing, in general
 # "file" is useful only on platforms where cgo is not available for using the
 # faster "shm" lock type. You may need to run "podman system renumber" after
 # you change the lock type.
 #
-#lock_type** = "shm"
+#lock_type = "shm"
 
 # MultiImageArchive - if true, the container engine allows for storing archives
 # (e.g., of the docker-archive transport) with multiple images.  By default,
 # Podman creates single-image archives.
 #
-#multi_image_archive = "false"
+#multi_image_archive = false
 
 # Default engine namespace
 # If engine is joined to a namespace, it will see only containers and pods
@@ -518,7 +639,8 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #no_pivot_root = false
 
-# Number of locks available for containers and pods.
+# Number of locks available for containers, pods, and volumes. Each container,
+# pod, and volume consumes 1 lock for as long as it exists.
 # If this is changed, a lock renumber must be performed (e.g. with the
 # 'podman system renumber' command).
 #
@@ -537,6 +659,16 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #remote = false
 
+# Number of times to retry pulling/pushing images in case of failure
+#
+#retry = 3
+
+# Delay between retries in case pulling/pushing image fails.
+# If set, container engines will retry at the set interval,
+# otherwise they delay 2 seconds and then exponentially back off.
+#
+#retry_delay = "2s"
+
 # Default OCI runtime
 #
 #runtime = "crun"
@@ -582,12 +714,12 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 
 # map of service destinations
 #
-#[service_destinations]
-#  [service_destinations.production]
+# [engine.service_destinations]
+#  [engine.service_destinations.production]
 #     URI to access the Podman service
 #     Examples:
-#       rootless "unix://run/user/$UID/podman/podman.sock" (Default)
-#       rootful "unix://run/podman/podman.sock (Default)
+#       rootless "unix:///run/user/$UID/podman/podman.sock" (Default)
+#       rootful "unix:///run/podman/podman.sock (Default)
 #       remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock
 #       remote rootful ssh://root@10.10.1.136:22/run/podman/podman.sock
 #
@@ -612,6 +744,9 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 # A value of 0 is treated as no timeout.
 #volume_plugin_timeout = 5
 
+# Default timeout in seconds for podmansh logins.
+#podmansh_timeout = 30
+
 # Paths to look for a valid OCI runtime (crun, runc, kata, runsc, krun, etc)
 [engine.runtimes]
 #crun = [
@@ -624,6 +759,15 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #  "/run/current-system/sw/bin/crun",
 #]
 
+#crun-vm = [
+#  "/usr/bin/crun-vm",
+#  "/usr/local/bin/crun-vm",
+#  "/usr/local/sbin/crun-vm",
+#  "/sbin/crun-vm",
+#  "/bin/crun-vm",
+#  "/run/current-system/sw/bin/crun-vm",
+#]
+
 #kata = [
 #  "/usr/bin/kata-runtime",
 #  "/usr/sbin/kata-runtime",
@@ -679,16 +823,15 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #disk_size=10
 
-# Default image URI when creating a new VM using `podman machine init`.
-# Options: On Linux/Mac, `testing`, `stable`, `next`. On Windows, the major
-# version of the OS (e.g `36`) for Fedora 36. For all platforms you can
-# alternatively specify a custom download URL to an image. Container engines
-# translate URIs $OS and $ARCH to the native OS and ARCH. URI
-# "https://example.com/$OS/$ARCH/foobar.ami" becomes
+# Default Image used when creating a new VM using `podman machine init`.
+# Can be specified as registry with a bootable OCI artifact, download URL, or a local path.
+# Registry target must be in the form of `docker://registry/repo/image:version`.
+# Container engines translate URIs $OS and $ARCH to the native OS and ARCH.
+# URI "https://example.com/$OS/$ARCH/foobar.ami" would become
 # "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine.
-# The default value is `testing`.
+# If unspecified, the default Podman machine image will be used.
 #
-#image = "testing"
+#image = ""
 
 # Memory in MB a machine is created with.
 #
@@ -713,8 +856,21 @@ cni_plugin_dirs = ["@LIBEXECDIR@/cni"]
 #
 #provider = ""
 
+# Rosetta supports running x86_64 Linux binaries on a Podman machine on Apple silicon.
+# The default value is `true`. Supported on AppleHV(arm64) machines only.
+#
+#rosetta=true
+
 # The [machine] table MUST be the last entry in this file.
 # (Unless another table is added)
 # TOML does not provide a way to end a table other than a further table being
 # defined, so every key hereafter will be part of [machine] and not the
 # main config.
+
+[farms]
+#
+# the default farm to use when farming out builds
+# default = ""
+#
+# map of existing farms
+#[farms.list]

libcontainers-common.changes

@@ -1,3 +1,32 @@
+-------------------------------------------------------------------
+Wed Apr 24 14:56:17 UTC 2024 - Danish Prakash <danish.prakash@suse.com>
+
+- Introduce new subpackage that ships registries.conf which uses
+  registry.suse.com as the only unqualified registry while pulling images on
+  SL Micro. (SMO-376)
+
+-------------------------------------------------------------------
+Mon Apr  8 15:15:18 UTC 2024 - Danish Prakash <danish.prakash@suse.com>
+
+- Add patch to keep containers.conf modifications in sync with upstream (bsc#1213556)
+  + 0001-containers.conf-SUSE-clear-cni-config-dir-for-ALP.patch
+- Fallback to podman's default capabilities and journal driver via containers.conf
+- New release 20240408
+- bump bundled c/common to 0.58.0
+- bump bundled c/image to 5.30.0
+- bump bundled c/storage to 1.53.0
+
+-------------------------------------------------------------------
+Wed Mar 20 10:41:40 UTC 2024 - Marcus Meissner <meissner@suse.com>
+
+- reenable SUSE registry key validation for new key.
+
+-------------------------------------------------------------------
+Fri Mar  1 13:16:28 UTC 2024 - Marcus Meissner <meissner@suse.com>
+
+- disable the SUSE registry key validation temporary to switch the key on 
+  registry.suse.com.
+
 -------------------------------------------------------------------
 Tue Feb  6 13:35:30 UTC 2024 - Dan Čermák <dcermak@suse.com>
 

libcontainers-common.spec

@@ -17,17 +17,17 @@
 
 
 # commonver - version from containers/common
-%define commonver 0.57.4
+%define commonver 0.58.0
 # storagever - version from containers/storage
-%define storagever 1.51.0
+%define storagever 1.53.0
 # imagever - version from containers/image
-%define imagever 5.29.2
+%define imagever 5.30.0
 # skopeover - version from containers/skopeo
-%define skopeover 1.14.2
+%define skopeover 1.15.0
 # https://github.com/containers/shortnames
 %define shortnamesver 2023.02.20
 Name:           libcontainers-common
-Version:        20240206
+Version:        20240408
 Release:        0
 Summary:        Configuration files common to github.com/containers
 License:        Apache-2.0
@@ -47,17 +47,22 @@ Source6:        registries.conf
 # https://github.com/containers/skopeo/blob/main/default.yaml but heavily modified
 Source7:        default.yaml
 Source8:        common-%{commonver}.tar.xz
-# https://github.com/containers/common/blob/main/pkg/config/containers.conf with custom settings
-Source9:        containers.conf
+Source9:        https://raw.githubusercontent.com/containers/common/v%{commonver}/pkg/config/containers.conf
 Source10:       %{name}.rpmlintrc
 Source11:       https://raw.githubusercontent.com/containers/shortnames/v%{shortnamesver}/shortnames.conf
 Source12:       openSUSE-policy.json
+Patch100:       0001-containers.conf-SUSE-clear-cni-config-dir-for-ALP.patch
 BuildRequires:  go-go-md2man
 Requires(post): %{_bindir}/sed
 # add SLE-specific mounts for only SLES systems
 Requires:       (libcontainers-sles-mounts if (product(SUSE_SLE) or product(SLE-Micro)))
 Requires:       libcontainers-policy >= %{version}
 Suggests:       (libcontainers-policy-openSUSE if openSUSE-release)
+# Default to SUSE registry on SL Micro,
+# keep SUSE, openSUSE and dockerhub registries otherwise.
+# (SMO-376)
+Requires:       registries-conf >= %{version}
+Suggests:       (registries-conf-sl-micro if product(SL-Micro))
 Provides:       libcontainers-image = %{version}
 Provides:       libcontainers-storage = %{version}
 Obsoletes:      libcontainers-image < %{version}
@@ -72,7 +77,7 @@ github.com/containers libraries, such as Buildah, CRI-O, Podman and Skopeo.
 Summary:        Default mounts for SLE distributions
 
 %description -n libcontainers-sles-mounts
-Updates /etc/containers/mounts.conf with default mounts for SLE distributions
+Ships a /etc/containers/mounts.conf with default mounts for SLE distributions
 
 %package -n libcontainers-openSUSE-policy
 Summary:        Policy to enforce image verification for SLE BCI
@@ -94,14 +99,40 @@ Conflicts:      libcontainers-openSUSE-policy
 %description -n libcontainers-default-policy
 This package ships the default /etc/containers/policy.json
 
+%package -n registries-conf-sl-micro
+Summary:                Defaults to SUSE Registry on SL Micro
+Provides:               registries-conf = %{version}-%{release}
+RemovePathPostfixes:    .sl-micro
+Conflicts:              registries-conf-default
+Requires:               product(SL-Micro)
+
+%description -n registries-conf-sl-micro
+Ships registries.conf that uses registry.suse.com as the only unqualified registry on SL Micro.
+
+%package -n registries-conf-default
+Summary:                Add SUSE and openSUSE registries to be used to pull images along with dockerhub
+Provides:               registries-conf = %{version}-%{release}
+RemovePathPostfixes:    .default
+Conflicts:              registries-conf-sl-micro
+
+%description -n registries-conf-default
+Ships the default registries.conf including the SUSE and openSUSE registries.
+
 %prep
+cp %{SOURCE9} .
+# Apply CNI config on streams other than ALP (bsc#1213556)
+# https://github.com/containers/podman/issues/19327
+%if 0%{?suse_version} < 1600 && !0%{?is_opensuse}
+%patch -P100 -p3
+sed -e 's-@LIBEXECDIR@-%{_libexecdir}-g' -i %_builddir/containers.conf
+%endif
+
 %setup -q -Tcq -b0 -b1 -b8
 # copy the LICENSE file in the build root
 cp %{SOURCE2} .
 
 %build
 cd ..
-pwd
 # compile containers/image manpages
 cd image-%{imagever}
 for md in docs/*.md
@@ -132,11 +163,8 @@ cat >>%{SOURCE5} <<EOL
 %{_sysconfdir}/zypp/credentials.d/SCCcredentials:%{_sysconfdir}/zypp/credentials.d/SCCcredentials
 EOL
 
-# Disable CNI related configs on ALP (bsc#1213556)
-# https://github.com/containers/podman/issues/19327
-%if 0%{?suse_version} >= 1600 && !0%{?is_opensuse}
-sed -i 's/cni_plugin_dirs = .*/\# cni_plugin_dirs = []/g' %{SOURCE9}
-%endif
+# Default to SUSE registry on SL Micro
+sed 's/unqualified-search-registries.*/unqualified-search-registries = \["registry.suse.com"\]/' %{SOURCE6} > registries.conf.sl-micro
 
 cd common-%{commonver}
 %make_build docs
@@ -157,11 +185,9 @@ install -D -m 0644 %{SOURCE3} %{buildroot}/%{_sysconfdir}/containers/policy.json
 install -D -m 0644 %{SOURCE4} %{buildroot}/%{_sysconfdir}/containers/storage.conf
 install -D -m 0644 %{SOURCE5} %{buildroot}/%{_datadir}/containers/mounts.conf
 install -D -m 0644 %{SOURCE5} %{buildroot}/%{_sysconfdir}/containers/mounts.conf
-install -D -m 0644 %{SOURCE6} %{buildroot}/%{_sysconfdir}/containers/registries.conf
 install -D -m 0644 %{SOURCE11} %{buildroot}/%{_sysconfdir}/containers/registries.conf.d/000-shortnames.conf
 install -D -m 0644 %{SOURCE7} %{buildroot}/%{_sysconfdir}/containers/registries.d/default.yaml
-sed -e 's-@LIBEXECDIR@-%{_libexecdir}-g' -i %{SOURCE9}
-install -D -m 0644 %{SOURCE9} %{buildroot}/%{_datadir}/containers/containers.conf
+install -D -m 0644 %_builddir/containers.conf %{buildroot}/%{_datadir}/containers/containers.conf
 install -D -m 0644 common-%{commonver}/pkg/seccomp/seccomp.json %{buildroot}/%{_datadir}/containers/seccomp.json
 install -D -m 0644 common-%{commonver}/pkg/seccomp/seccomp.json %{buildroot}/%{_sysconfdir}/containers/seccomp.json
 
@@ -178,6 +204,9 @@ install -D -m 0644 common-%{commonver}/docs/containers.conf.5 %{buildroot}/%{_ma
 install -D -m 0644 %{SOURCE12} %{buildroot}/%{_sysconfdir}/containers/policy.json.openSUSE
 install -D -m 0644 %{SOURCE3} %{buildroot}/%{_sysconfdir}/containers/policy.json.default
 
+install -D -m 0644 %{SOURCE6} %{buildroot}/%{_sysconfdir}/containers/registries.conf.default
+install -D -m 0644 registries.conf.sl-micro %{buildroot}/%{_sysconfdir}/containers/registries.conf.sl-micro
+
 %post
 # Comment out ostree_repo if it's blank [boo#1189893]
 sed -i 's/ostree_repo = ""/\#ostree_repo = ""/g' %{_sysconfdir}/containers/storage.conf
@@ -195,7 +224,6 @@ sed -i 's/ostree_repo = ""/\#ostree_repo = ""/g' %{_sysconfdir}/containers/stora
 %dir %{_datadir}/containers/systemd
 
 %config(noreplace) %{_sysconfdir}/containers/storage.conf
-%config(noreplace) %{_sysconfdir}/containers/registries.conf
 %config(noreplace) %{_sysconfdir}/containers/seccomp.json
 %config(noreplace) %{_sysconfdir}/containers/registries.d/default.yaml
 %config(noreplace) %{_sysconfdir}/containers/registries.conf.d/000-shortnames.conf
@@ -216,4 +244,10 @@ sed -i 's/ostree_repo = ""/\#ostree_repo = ""/g' %{_sysconfdir}/containers/stora
 %files -n libcontainers-default-policy
 %config(noreplace) %{_sysconfdir}/containers/policy.json.default
 
+%files -n registries-conf-sl-micro
+%config(noreplace) %{_sysconfdir}/containers/registries.conf.sl-micro
+
+%files -n registries-conf-default
+%config(noreplace) %{_sysconfdir}/containers/registries.conf.default
+
 %changelog