openmpi3/openmpi3.changes

393 lines
17 KiB
Plaintext

-------------------------------------------------------------------
Thu Nov 3 09:37:32 UTC 2022 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add rmaps-simplify-the-lookup-for-the-binding-object-and-fix-for-hwloc-2.0.patch
to fix compatibility with hwloc >= 2.0 (bsc#1204982)
-------------------------------------------------------------------
Wed Jul 6 12:29:12 UTC 2022 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Enable libfabric on all arch
- Switch to external libevent for all flavors
- Switch to external hwloc and PMIx for HPC builds
- Add patches to fix compilation against hwloc v2.x
- Revert-hwloc-bring-back-the-configure-error-when-external-hwloc-is-2.0.patch
- hwloc-fix-hwloc-shmem.h-in-the-external-case.patch
- hwloc-updates-for-hwloc-2.0.x-API.patch
- Backport upstream patches for external PMIx support
- pmix-pmix2x-Fix-the-PMIx-discovery-logic.patch
- pmix-Fix-detection-of-Externally-built-PMIx.patch
- Update rpmlintrc file to ignore missing libname suffix in libopenmpi packages
- Add patch btl-openib-Add-support-for-newer-hardware.patch to support
newer RDMA hardware (ConnectX 4 and 5 VF, ConnectX6 PF + VF and Broadcom adapters)
-------------------------------------------------------------------
Mon Jun 13 06:38:32 UTC 2022 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Backport upstream patchs to fix compilation with autoconf >= 2.70 and GCC12
- Fix-error-with-stricter-quoting-requirements-of-autoconf-2.70.patch
- Always-include-the-stddef.h-header.patch
-------------------------------------------------------------------
Mon Mar 7 16:54:42 UTC 2022 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add fix-rdma-component-selection.patch to fix bad rdma component selection
which can cause stall when running on multiple IB nodes (bsc#1196838).
-------------------------------------------------------------------
Tue Oct 19 15:24:25 UTC 2021 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Move rpm macros to %_rpmmacrodir (bsc#1191390)
-------------------------------------------------------------------
Thu Jul 23 16:00:23 UTC 2020 - Egbert Eich <eich@suse.com>
- Add build support for gcc8/9/10 to HPC build (bsc#1174439).
-------------------------------------------------------------------
Fri Mar 20 11:26:15 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to openmpi3 3.1.6
- See changelog in NEWS
- Remove add-gen-p5-chip-pci-id-to-ini-file.patch that was merged upstream
- Add patch memory-patcher-fix-compiler-warning.patch to fix cast warning
causing RPM to fail building
-------------------------------------------------------------------
Thu Mar 19 08:26:16 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Drop different package string between SLES and Leap (jsc#SLE-11848)
-------------------------------------------------------------------
Mon Jan 13 09:56:29 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Have openmpi3-config provide pmix-runtime-config
-------------------------------------------------------------------
Thu Dec 5 10:36:33 UTC 2019 - Michel Normand <normand@linux.vnet.ibm.com>
- Add _constraints file for ppc64le for disk > 4G
-------------------------------------------------------------------
Thu Oct 31 16:54:27 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Link against libnuma (bsc#1155120)
-------------------------------------------------------------------
Tue Oct 22 09:11:49 UTC 2019 - Christian Goll <cgoll@suse.com>
- added --with-slurm (its enabled by default), but if this behavior
is changed the binding should not away
-------------------------------------------------------------------
Thu Oct 10 06:09:30 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add missing Provides when openmpi3 is the default openmpi
- Add conflict with the older hpc-macros-devel providers to avoid issues during updates
- Add openmpi_prefix macro to openmpi-macros-devel
-------------------------------------------------------------------
Fri Sep 27 11:17:24 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add macro file for non-hpc flavour
- Enable build on ppc64
-------------------------------------------------------------------
Fri Sep 6 11:14:12 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Use FAT LTO objects in order to provide proper static library.
- Mark LICENSE with %license
-------------------------------------------------------------------
Tue Apr 23 07:42:08 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Fix bad INCLUDE path in module (bsc#1132949)
-------------------------------------------------------------------
Fri Apr 19 05:56:35 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to openmpi 3.1.4
- See changelog in NEWS
-------------------------------------------------------------------
Mon Apr 1 05:20:04 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add add-gen-p5-chip-pci-id-to-ini-file.patch:
- Adds support for Broadcom 57500 adapters (bsc#1125651)
- Update to openmpi 3.1.3
- See changelog in NEWS
-------------------------------------------------------------------
Sun Nov 18 14:27:03 UTC 2018 - eich@suse.com
- Add macro _hpc_openmpi_modules for modules support (bsc#1116458).
-------------------------------------------------------------------
Mon Sep 10 12:15:48 UTC 2018 - nmoreychaisemartin@suse.com
- Remove bashism in preun scriptlet
-------------------------------------------------------------------
Wed Sep 5 06:53:37 UTC 2018 - nmoreychaisemartin@suse.com
- Fix handling of mpi-selector during updates (bsc#1098653)
-------------------------------------------------------------------
Mon Sep 3 08:47:46 UTC 2018 - bwiedemann@suse.com
- Add reproducible.patch to drop build time and hostname to make
package build reproducible (boo#1047218, boo#1084909)
-------------------------------------------------------------------
Sun Aug 19 09:25:46 UTC 2018 - eich@suse.com
- macros.hpc-openmpi3:
replace %%compiler_family by %%hpc_compiler_family
-------------------------------------------------------------------
Thu Jul 5 12:29:43 UTC 2018 - nmoreychaisemartin@suse.com
- Update to openmpi 3.1.1
3.1.1 -- June, 2018
-------------------
- Fix potential hang in UCX PML during MPI_FINALIZE
- Update internal PMIx to v2.1.2rc2 to fix forward version compatibility.
- Add new MCA parameter osc_sm_backing_store to allow users to specify
where in the filesystem the backing file for the shared memory
one-sided component should live. Defaults to /dev/shm on Linux.
- Fix potential hang on non-x86 platforms when using builds with
optimization flags turned off.
- Disable osc/pt2pt when using MPI_THREAD_MULTIPLE due to numerous
race conditions in the component.
- Fix dummy variable names for the mpi and mpi_f08 Fortran bindings to
match the MPI standard. This may break applications which use
name-based parameters in Fortran which used our internal names
rather than those documented in the MPI standard.
- Revamp Java detection to properly handle new Java versions which do
not provide a javah wrapper.
- Fix RMA function signatures for use-mpi-f08 bindings to have the
asynchonous property on all buffers.
- Improved configure logic for finding the UCX library.
3.1.0 -- May, 2018
------------------
- Various OpenSHMEM bug fixes.
- Properly handle array_of_commands argument to Fortran version of
MPI_COMM_SPAWN_MULTIPLE.
- Fix bug with MODE_SEQUENTIAL and the sharedfp MPI-IO component.
- Use "javac -h" instead of "javah" when building the Java bindings
with a recent version of Java.
- Fix mis-handling of jostepid under SLURM that could cause problems
with PathScale/OmniPath NICs.
- Disable the POWER 7/BE block in configure. Note that POWER 7/BE is
still not a supported platform, but it is no longer automatically
disabled. See
https://github.com/open-mpi/ompi/issues/4349#issuecomment-374970982
for more information.
- The output-filename option for mpirun is now converted to an
absolute path before being passed to other nodes.
- Add monitoring component for PML, OSC, and COLL to track data
movement of MPI applications. See
ompi/mca/commmon/monitoring/HowTo_pml_monitoring.tex for more
information about the monitoring framework.
- Add support for communicator assertions: mpi_assert_no_any_tag,
mpi_assert_no_any_source, mpi_assert_exact_length, and
mpi_assert_allow_overtaking.
- Update PMIx to version 2.1.1.
- Update hwloc to 1.11.7.
- Many one-sided behavior fixes.
- Improved performance for Reduce and Allreduce using Rabenseifner's algorithm.
- Revamped mpirun --help output to make it a bit more manageable.
- Portals4 MTL improvements: Fix race condition in rendezvous protocol and
retry logic.
- UCX OSC: initial implementation.
- UCX PML improvements: add multi-threading support.
- Yalla PML improvements: Fix error with irregular contiguous datatypes.
- Openib BTL: disable XRC support by default.
- TCP BTL: Add check to detect and ignore connections from processes
that aren't MPI (such as IDS probes) and verify that source and
destination are using the same version of Open MPI, fix issue with very
large message transfer.
- ompi_info parsable output now escapes double quotes in values, and
also quotes values can contains colons. Thanks to Lev Givon for the
suggestion.
- CUDA-aware support can now handle GPUs within a node that do not
support CUDA IPC. Earlier versions would get error and abort.
- Add a mca parameter ras_base_launch_orted_on_hn to allow for launching
MPI processes on the same node where mpirun is executing using a separate
orte daemon, rather than the mpirun process. This may be useful to set to
true when using SLURM, as it improves interoperability with SLURM's signal
propagation tools. By default it is set to false, except for Cray XC systems.
- Remove LoadLeveler RAS support.
- Remove IB XRC support from the OpenIB BTL due to lack of support.
- Add functionality for IBM s390 platforms. Note that regular
regression testing does not occur on the s390 and it is not
considered a supported platform.
- Remove support for big endian PowerPC.
- Remove support for XL compilers older than v13.1.
- Remove support for atomic operations using MacOS atomics library.
- Drop btl-vader-change-the-way-fast-boxes-are-used.patch which was merged upstream
- Add Build-warning-stringop-overflow-in.patch to fix a potential buffer overflow warning.
-------------------------------------------------------------------
Wed May 2 18:24:56 UTC 2018 - eich@suse.com
- Create missing docs master package (bsc#1091714)
-------------------------------------------------------------------
Mon Mar 26 11:31:06 UTC 2018 - nmoreychaisemartin@suse.com
- Enable --enable-mpirun-prefix-by-default (bsc#1086821)
-------------------------------------------------------------------
Fri Feb 9 12:05:35 UTC 2018 - cgoll@suse.com
- Fix summary in module files (bnc#1080259)
-------------------------------------------------------------------
Tue Jan 30 20:03:24 UTC 2018 - eich@suse.com
- Use macro in mpivars.(c)sh to be independent of changes to the module
setup for the compiler (boo#1078364).
-------------------------------------------------------------------
Wed Jan 17 09:54:18 UTC 2018 - nmoreychaisemartin@suse.com
- Only build openmpi3-config for the standard flavor
-------------------------------------------------------------------
Fri Jan 5 19:02:20 UTC 2018 - eich@suse.com
- Switch from gcc6 to gcc7 as additional compiler flavor for HPC on SLES.
- Fix library package requires - use HPC macro (boo#1074890).
- Fix rpm macro file.
-------------------------------------------------------------------
Thu Dec 7 10:58:31 UTC 2017 - nmoreychaisemartin@suse.com
- Add btl-vader-change-the-way-fast-boxes-are-used.patch to
fix a SEGV on i386 systems
-------------------------------------------------------------------
Tue Oct 10 13:16:11 UTC 2017 - nmoreychaisemartin@suse.com
- Add a ringdisabled flag to allow building only the standard flavor
so not all flavors are pulled into staging rings
- Fix baselibs.conf generation (wrong directory and name)
- Fix pre/post install call to ldconfig
-------------------------------------------------------------------
Fri Oct 6 13:58:00 UTC 2017 - nmoreychaisemartin@suse.com
- Add conflicts between the macros-devel packages
-------------------------------------------------------------------
Wed Sep 27 11:59:34 UTC 2017 - nmoreychaisemartin@suse.com
- Converted to multibuild.
- Add HPC build using environment modules (FATE#321711).
- Resync spec file with openmpi and openmpi2
-------------------------------------------------------------------
Mon Sep 25 15:45:23 UTC 2017 - nmoreychaisemartin@suse.com
- Fix VERSION file during build so that ompi_info reports good infos
-------------------------------------------------------------------
Tue Sep 19 15:04:51 UTC 2017 - nmoreychaisemartin@suse.com
- Remove --disable-mca-dso
Related bug was due to openmpi/*.so wrongly packaged as devel
-------------------------------------------------------------------
Wed Sep 13 07:27:16 UTC 2017 - nmoreychaisemartin@suse.com
- Update to OpenMPI 3.0.0
- Enable fortan08 bindings
- Disable devel headers
-------------------------------------------------------------------
Mon Aug 21 11:52:26 UTC 2017 - nmoreychaisemartin@suse.com
- Update to openMPI 3.0.0rc3
-------------------------------------------------------------------
Mon Jul 3 13:05:34 UTC 2017 - nmoreychaisemartin@suse.com
- Build with openucx support
-------------------------------------------------------------------
Mon Jul 3 13:52:53 CEST 2017 - pth@suse.de
- Initial packaging of openMPI 3.0.0rc1.
* Use UCX allocator for OSHMEM symmetric heap allocations to optimize intra-node
data transfers. UCX SPML only.
* Use UCX multi-threaded API in the UCX PML. Requires UCX 1.0 or later.
* Fix file list and call fdupes.
-------------------------------------------------------------------
Wed Jun 28 06:31:04 UTC 2017 - jengelh@inai.de
- Trim filler wording from description
- Replace uses of old $RPM_ variables, remove redundant %clean
section, abolish %__-type macro indirection,
remove excess piping to xargs
- Add missing %_smp_mflags.
-------------------------------------------------------------------
Thu Jun 15 12:06:33 UTC 2017 - nmoreychaisemartin@suse.com
- Add support for openmpi2 over PSM2 and libfabric
- Reference baselibs.conf and openmpi2-rpmlintrc in spec
- Add _service to fetch from upstream github repo
-------------------------------------------------------------------
Thu Jun 8 11:39:44 UTC 2017 - nmoreychaisemartin@suse.com
- Remove version dependencies to libibumad and libibverbs
-------------------------------------------------------------------
Wed May 31 12:30:39 UTC 2017 - nmoreychaisemartin@suse.com
- Fix module file paths
-------------------------------------------------------------------
Tue May 30 14:21:28 UTC 2017 - nmoreychaisemartin@suse.com
- Add openmpi2-config package which contains runtime configuration
files for OpenMPI 1 and/or 2
-------------------------------------------------------------------
Wed May 17 09:17:16 UTC 2017 - nmoreychaisemartin@suse.com
- Update to OpenMPI 2.1.1
* Fix a problem with one of Open MPI's fifo data structures which led to
hangs in a make check test.
* Add missing MPI_AINT_ADD/MPI_AINT_DIFF function definitions to mpif.h.
* Fix the error return from MPI_WIN_LOCK when rank argument is invalid.
* Fix a problem with mpirun/orterun when started under a debugger.
* Add configury option to disable use of CMA by the vader BTL.
* Add configury check for MPI_DOUBLE_COMPLEX datatype support.
* Fix memory allocated by MPI_WIN_ALLOCATE_SHARED to
be 64 byte aligned.
* Update MPI_WTICK man page to reflect possibly higher
resolution than 10e-6.
* Add missing MPI_T_PVAR_SESSION_NULL definition to mpi.h
include file.
* Enhance the Open MPI spec file to install modulefile in /opt
if installed in a non-default location.
* Fix a problem with conflicting PMI symbols when linking statically.
* S390/S390x support
- Drop openmpi2-ia32-fix-atomic.patch openmpi2-s390.patch as they are now
fixed/supported upstream.
-------------------------------------------------------------------
Tue May 2 15:45:26 UTC 2017 - nmoreychaisemartin@suse.com
- Add testsuite package
-------------------------------------------------------------------
Mon Apr 24 18:22:22 UTC 2017 - nmoreychaisemartin@suse.com
- Initial packaging of OpenMPI 2.1.0