dnsmasq/dnsmasq.changes

2054 lines
82 KiB
Plaintext

-------------------------------------------------------------------
Wed Feb 14 17:39:46 UTC 2024 - Reinhard Max <max@suse.com>
- update to 2.90:
* CVE-2023-50387, CVE-2023-50868, bsc#1219823, bsc#1219826:
Denial Of Service while trying to validate specially crafted
DNSSEC responses
* CVE-2023-49441, bsc#1226091: integer overflow via forward_query
* Fix reversion in --rev-server introduced in 2.88 which caused
breakage if the prefix length is not exactly divisible by 8
(IPv4) or 4 (IPv6).
* Fix possible SEGV when there server(s) for a particular domain
are configured, but no server which is not qualified for a
particular domain.
* Set the default maximum DNS UDP packet sice to 1232.
Obsoletes: dnsmasq-CVE-2023-28450.patch
* Add --no-dhcpv4-interface and --no-dhcpv6-interface for better
control over which inetrfaces are providing DHCP service.
* Fix issue with stale caching
* Add configurable caching for arbitrary RR-types.
* Add --filter-rr option, to filter arbitrary RR-types.
-------------------------------------------------------------------
Fri Oct 13 08:48:49 UTC 2023 - Thorsten Kukuk <kukuk@suse.com>
- SLP got dropped, remove config (bsc#1214884)
-------------------------------------------------------------------
Sat May 13 16:48:15 UTC 2023 - Callum Farmer <gmbr3@opensuse.org>
- Correct rundir from /var/run to /run for pid file
-------------------------------------------------------------------
Tue Apr 25 08:32:41 UTC 2023 - Reinhard Max <max@suse.com>
- bsc#1209358, CVE-2023-28450, dnsmasq-CVE-2023-28450.patch:
default maximum EDNS.0 UDP packet size should be 1232
-------------------------------------------------------------------
Mon Feb 6 09:27:27 UTC 2023 - Paolo Stivanin <info@paolostivanin.com>
- update to 2.89:
* Fix bug introduced in 2.88 (commit fe91134b) which can result
in corruption of the DNS cache internal data structures and
logging of "cache internal error". This has only been seen
in one place in the wild, and it took considerable effort
to even generate a test case to reproduce it, but there's
no way to be sure it won't strike, and the effect is to break
the cache badly. Installations with DNSSEC enabled are more
likely to see the problem, but not running DNSSEC does not
guarantee that it won't happen. Thanks to Timo van Roermund
for reporting the bug and for his great efforts in chasing
it down. (boo#1207174)
- remove no longer needed rpmlintrc filters
-------------------------------------------------------------------
Fri Dec 23 07:48:29 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 2.88:
* Fix bug in --dynamic-host when an interface has /16 IPv4
* address.
* Add --fast-dns-retry option. This gives dnsmasq the ability
to originate retries for upstream DNS queries itself, rather
than relying on the downstream client. This is most useful
when doing DNSSEC over unreliable upstream networks. It comes
with some cost in memory usage and network bandwidth.
* Add --use-stale-cache option. When set, if a DNS name exists
in the cache, but its time-to-live has expired, dnsmasq will
return the data anyway.
* handle removal of whole files or entries within files.
-------------------------------------------------------------------
Wed Oct 26 09:21:37 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 2.87 (bsc#1197872, CVE-2022-0934):
* Allow arbitrary prefix lengths in --rev-server and
--domain=....,local
* Replace --address=/#/..... functionality which got
missed in the 2.86 domain search rewrite.
* Add --nftset option, like --ipset but for the newer nftables.
* Add --filter-A and --filter-AAAA options, to remove IPv4 or IPv6
addresses from DNS answers.
* Fix crash doing netbooting when --port is set to zero
to disable the DNS server. Thanks to Drexl Johannes
for the bug report.
* Generalise --dhcp-relay. Sending via broadcast/multicast is
now supported for both IPv4 and IPv6 and the configuration
syntax made easier (but backwards compatible).
* Add snooping of IPv6 prefix-delegations to the DHCP-relay system.
* Finesse parsing of --dhcp-remoteid and --dhcp-subscrid. To be treated
as hex, the pattern must consist of only hex digits AND contain
at least one ':'. Thanks to Bengt-Erik Sandstrom who tripped
over a pattern consisting of a decimal number which was interpreted
surprisingly.
* Include client address in TFTP file-not-found error reports.
Thanks to Stefan Rink for the initial patch, which has been
re-worked by me (srk). All bugs mine.
* Note in manpage the change in behaviour of -address. This behaviour
actually changed in v2.86, but was undocumented there. From 2.86 on,
(eg) --address=/example.com/1.2.3.4 ONLY applies to A queries. All other
types of query will be sent upstream. Pre 2.86, that would catch the
whole example.com domain and queries for other types would get
a local NODATA answer. The pre-2.86 behaviour is still available,
by configuring --address=/example.com/1.2.3.4 --local=/example.com/
* Fix problem with binding DHCP sockets to an individual interface.
Despite the fact that the system call tales the interface _name_ as
a parameter, it actually, binds the socket to interface _index_.
Deleting the interface and creating a new one with the same name
leaves the socket bound to the old index. (Creating new sockets
always allocates a fresh index, they are not reused). We now
take this behaviour into account and keep up with changing indexes.
* Add --conf-script configuration option.
* Enhance --domain to accept, for instance,
--domain=net2.thekelleys.org.uk,eth2 so that hosts get a domain
which relects the interface they are attached to in a way which
doesn't require hard-coding addresses. Thanks to Sten Spans for
the idea.
* Fix write-after-free error in DHCPv6 server code.
CVE-2022-0934 refers.
* Add the ability to specify destination port in
DHCP-relay mode. This change also removes a previous bug
where --dhcp-alternate-port would affect the port used
to relay _to_ as well as the port being listened on.
The new feature allows configuration to provide bug-for-bug
compatibility, if required. Thanks to Damian Kaczkowski
for the feature suggestion.
* Bound the value of UDP packet size in the EDNS0 header of
forwarded queries to the configured or default value of
edns-packet-max. There's no point letting a client set a larger
value if we're unable to return the answer. Thanks to Bertie
Taylor for pointing out the problem and supplying the patch.
- drop dnsmasq-CVE-2022-0934.patch, dnsmasq-resolv-conf.patch (upstream)
-------------------------------------------------------------------
Fri Sep 9 11:00:25 UTC 2022 - Callum Farmer <gmbr3@opensuse.org>
- Ensure the dnsmasq user's group is used
- Remove nogroup requirement
-------------------------------------------------------------------
Wed Jun 8 14:24:38 UTC 2022 - Callum Farmer <gmbr3@opensuse.org>
- Move the dbus-1 system.d file to /usr (bsc#1200344)
-------------------------------------------------------------------
Tue Apr 5 07:16:18 UTC 2022 - Reinhard Max <max@suse.com>
- bsc#1197872, CVE-2022-0934, dnsmasq-CVE-2022-0934.patch:
Heap use after free in dhcp6_no_relay
-------------------------------------------------------------------
Thu Nov 18 13:59:55 UTC 2021 - Reinhard Max <max@suse.com>
- bsc#1192529, dnsmasq-resolv-conf.patch:
Fix a segfault when re-reading an empty resolv.conf
- Remove "nogroup" membership from the dnsmasq user.
-------------------------------------------------------------------
Wed Oct 20 17:08:15 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>
- Use systemd-sysusers from 15.3 onwards
-------------------------------------------------------------------
Thu Sep 23 08:48:12 UTC 2021 - Reinhard Max <max@suse.com>
- jsc#SLE-17936: Sync this state from Factory to SLE-15-SP1.
- SLE bugs that got fixed upstream between 2.79 and 2.86, but for
which we need to keep references when syncing:
* bsc#1176076: dnsmasq-servfail.patch
* bsc#1156543: dnsmasq-siocgstamp.patch
* bsc#1138743: dnsmasq-cache-size.patch
* bsc#1076958: CVE-2017-15107, dnsmasq-CVE-2017-15107.patch
* bsc#1180914: Open inotify socket only when used.
* removed dnsmasq-dnspooq.patch
- bsc#1173646, CVE-2020-14312: Set --local-service by default.
-------------------------------------------------------------------
Fri Sep 17 11:10:17 UTC 2021 - Reinhard Max <max@suse.com>
- Update to 2.86:
* Handle DHCPREBIND requests in the DHCPv6 server code.
* Fix bug which caused dnsmasq to lose track of processes forked
to handle TCP DNS connections under heavy load.
* Major rewrite of the DNS server and domain handling code. This
should be largely transparent, but it drastically improves
performance and reduces memory foot-print when configuring
large numbers of domains.
* Revise resource handling for number of concurrent DNS queries.
* Improve efficiency of DNSSEC.
* Connection track mark based DNS query filtering.
* Allow smaller than 64 prefix lengths in synth-domain, with
caveats.
--synth-domain=1234:4567::/56,example.com is now valid.
* Make domains generated by --synth-domain appear in replies
when in authoritative mode.
* Ensure CAP_NET_ADMIN capability is available when conntrack
is configured.
* When --dhcp-hostsfile --dhcp-optsfile and --addn-hosts are
given a directory as argument, define the order in which files
within that directory are read (alphabetical order of filename).
-------------------------------------------------------------------
Tue Sep 14 06:19:17 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400).
-------------------------------------------------------------------
Sun Jun 13 13:28:49 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>
- Add now working CONFIG parameter to sysusers generator
-------------------------------------------------------------------
Wed Jun 2 10:28:12 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>
- Change to using systemd-sysusers on TW
-------------------------------------------------------------------
Mon Apr 19 20:46:49 UTC 2021 - Reinhard Max <max@suse.com>
- Update to 2.85:
* Fix problem with DNS retries in 2.83/2.84.
* Tweak sort order of tags in get-version.
* Avoid treating a --dhcp-host which has an IPv6 address as
eligible for use with DHCPv4 on the grounds that it has
no address, and vice-versa.
* Add --dynamic-host option: A and AAAA records which take their
network part from the network of a local interface. Useful
for routers with dynamically prefixes.
* Teach --bogus-nxdomain and --ignore-address to take an IPv4
subnet.
* CVE-2021-3448, bsc#1183709: Use random source ports where
possible if source addresses/interfaces in use.
* Change the method of allocation of random source ports for DNS.
* Scale the size of the DNS random-port pool based on the
value of the --dns-forward-max configuration.
* Tweak TFTP code to check sender of all received packets, as
specified in RFC 1350 para 4.
-------------------------------------------------------------------
Mon Feb 8 22:37:20 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update to 2.84:
* Change HAVE_NETTLEHASH compile-time to HAVE_CRYPTOHASH
* Tidy initialisation in hash_questions.c
* Optimise sort_rrset for the case where the RR type
* Move fd into frec_src
-------------------------------------------------------------------
Wed Jan 27 16:24:43 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>
- Fix building with lua54
-------------------------------------------------------------------
Tue Jan 19 12:24:02 UTC 2021 - Reinhard Max <max@suse.com>
- Update to 2.83:
* bsc#1177077: Fixed DNSpooq vulnerabilities
* Use the values of --min-port and --max-port in outgoing
TCP connections to upstream DNS servers.
* Fix a remote buffer overflow problem in the DNSSEC code.
Any dnsmasq with DNSSEC compiled in and enabled is vulnerable
to this, referenced by CVE-2020-25681, CVE-2020-25682,
CVE-2020-25683 CVE-2020-25687.
* Be sure to only accept UDP DNS query replies at the address
from which the query was originated. This keeps as much
entropy in the {query-ID, random-port} tuple as possible, to
help defeat cache poisoning attacks. Refer: CVE-2020-25684.
* Use the SHA-256 hash function to verify that DNS answers
received are for the questions originally asked. This replaces
the slightly insecure SHA-1 (when compiled with DNSSEC) or
the very insecure CRC32 (otherwise). Refer: CVE-2020-25685
* Handle multiple identical near simultaneous DNS queries better.
Previously, such queries would all be forwarded independently.
This is, in theory, inefficent but in practise not a problem,
_except_ that is means that an answer for any of the forwarded
queries will be accepted and cached.
An attacker can send a query multiple times, and for each
repeat, another {port, ID} becomes capable of accepting the
answer he is sending in the blind, to random IDs and ports.
The chance of a succesful attack is therefore multiplied by the
number of repeats of the query. The new behaviour detects
repeated queries and merely stores the clients sending repeats
so that when the first query completes, the answer can be sent
to all the clients who asked. Refer: CVE-2020-25686.
-------------------------------------------------------------------
Tue Jul 28 08:00:51 UTC 2020 - Martin Rey <mrey@suse.com>
- Update to 2.82:
* Improve behaviour in the face of network interfaces which come
and go and change index.
* Convert hard startup failure on NETLINK_NO_ENOBUFS under
qemu-user to a warning.
* Allow IPv6 addresses ofthe form [::ffff:1.2.3.4] in
--dhcp-option.
* Fix crash under heavy TCP connection load introduced in 2.81.
* Change default lease time for DHCPv6 to one day.
* Alter calculation of preferred and valid times in router
advertisements, so that these do not have a floor applied of
the lease time in the dhcp-range if this is not explicitly
specified and is merely the default.
- Reformat spec file with spec-cleaner
-------------------------------------------------------------------
Tue May 5 11:26:55 UTC 2020 - Paolo Stivanin <info@paolostivanin.com>
- Update to 2.81:
* Improve cache behaviour for TCP connections
* Remove the NO_FORK compile-time option, and support for uclinux
* Fix line-counting when reading /etc/hosts and friends
* Fix bug in DNS non-terminal code, added in 2.80, which could
sometimes cause a NODATA rather than an NXDOMAIN reply.
* Support TCP-fastopen (RFC-7413) on both incoming and
outgoing TCP connections, if supported and enabled in the OS.
* Improve kernel-capability manipulation code under Linux
* Add --shared-network config. This enables allocation of addresses
by the DHCP server in subnets where the server (or relay) does not
have an interface on the network in that subnet. Many thanks to
kamp.de for sponsoring this feature.
* Fix broken contrib/lease_tools/dhcp_lease_time.c. A packet
validation check got borked in commit 2b38e382 and release 2.80.
Thanks to Tomasz Szajner for spotting this.
* Fix compilation against nettle version 3.5 and later.
* Fix spurious DNSSEC validation failures when the auth section
of a reply contains unsigned RRs from a signed zone,
with the exception that NSEC and NSEC3 RRs must always be signed.
Thanks to Tore Anderson for spotting and diagnosing the bug.
* Add --dhcp-ignore-clid. This disables reading of DHCP client
identifier option (option 61), so clients are only identified by
MAC addresses.
* Fix a bug which stopped --dhcp-name-match from working when a hostname
is supplied in --dhcp-host. Thanks to James Feeney for spotting this.
* Fix bug which caused very rarely caused zero-length DHCPv6 packets.
Thanks to Dereck Higgins for spotting this.
* Add --tftp-single-port option.
* Enhance --conf-dir to load files in a deterministic order
* Add filtering by tag of --dhcp-host directives
* Remove DSA signature verification from DNSSEC, as specified in
RFC 8624
* Add --script-on-renewal option.
- Remove Fix-build-with-libnettle-3.5.patch
- Remove 0001-fix-build-after-y2038-changes-in-glibc.patch
- Remove dnsmasq-CVE-2019-14834.patch
-------------------------------------------------------------------
Sat Nov 30 12:15:42 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- Remove redundant %else without meaning (if/else/else/endif?)
-------------------------------------------------------------------
Wed Nov 13 10:46:21 UTC 2019 - Reinhard Max <max@suse.com>
- bsc#1154849, CVE-2019-14834, dnsmasq-CVE-2019-14834.patch:
memory leak in the create_helper() function in /src/helper.c
- bsc#1143454: Require user(tftp) instead of creating it ourselves.
- Package contrib/lease-tools/dhcp_release6.
- bsc#1152539: include config files from /etc/dnsmasq.d/*.conf .
-------------------------------------------------------------------
Wed Sep 4 18:47:39 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>
- Add Fix-build-with-libnettle-3.5.patch
-------------------------------------------------------------------
Tue Jul 23 13:52:05 UTC 2019 - matthias.gerstner@suse.com
- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
firewalld, see [1].
[1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
-------------------------------------------------------------------
Wed Jul 10 06:28:36 UTC 2019 - Jiri Slaby <jslaby@suse.com>
- add 0001-fix-build-after-y2038-changes-in-glibc.patch
-------------------------------------------------------------------
Tue Jun 11 12:31:25 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
shortcut the build queues by allowing usage of systemd-mini
-------------------------------------------------------------------
Fri Feb 22 07:10:51 UTC 2019 - Franck Bui <fbui@suse.com>
- Drop use of $FIRST_ARG in .spec
The use of $FIRST_ARG was probably required because of the
%service_* rpm macros were playing tricks with the shell positional
parameters. This is bad practice and error prones so let's assume
that no macros should do that anymore and hence it's safe to assume
that positional parameters remains unchanged after any rpm macro
call.
-------------------------------------------------------------------
Wed Jan 23 23:03:22 UTC 2019 - Cristian Rodríguez <crrodriguez@opensuse.org>
- libidn should not be used anymore, switch to libidn2
-------------------------------------------------------------------
Mon Oct 22 08:29:46 UTC 2018 - Jan Engelhardt <jengelh@inai.de>
- Ensure neutrality of descriptions. / Replace description with
new upstream description.
- Do not hide failures from user/group additions.
- Replace old $RPM_* shell vars by macros.
-------------------------------------------------------------------
Sun Oct 21 22:17:10 UTC 2018 - sean@suspend.net
- Updated to dnsmasq 2.80
* Add support for RFC 4039 DHCP rapid commit
* Alter the default for dnssec-check-unsigned
* Fix DHCP when --no-ping and --dhcp-sequential-ip are set
* Allow zone transfer in authoritative mode if auth-peer is specified
* FIx missing fatal errors with some malformed options
* Fix crash on startup with a --synth-domain which has no prefix
-------------------------------------------------------------------
Fri Oct 19 15:01:00 UTC 2018 - cgoll@suse.com
- enabled lua scripting interface (FATE#327143).
-------------------------------------------------------------------
Wed Aug 29 16:22:13 UTC 2018 - dmueller@suse.com
- add missing prereq on the group to be created (bsc#1106446)
-------------------------------------------------------------------
Mon Jul 16 10:15:54 CEST 2018 - kukuk@suse.de
- Don't require systemd explicit, fix spec file to handle both
cases correct. In containers we don't have systemd.
- Adjust pre/post install for transactional updates.
- Use %license instead of %doc [bsc#1082318]
-------------------------------------------------------------------
Mon Dec 4 13:39:32 UTC 2017 - idonmez@suse.com
- Update keyring
-------------------------------------------------------------------
Fri Dec 1 14:50:09 UTC 2017 - cbosdonnat@suse.com
- Get rid of python dependency due to examples. (fate#323526)
-------------------------------------------------------------------
Mon Oct 2 14:09:59 UTC 2017 - max@suse.com
- Security update to version 2.78:
* bsc#1060354, CVE-2017-14491: 2 byte heap based overflow.
* bsc#1060355, CVE-2017-14492: heap based overflow.
* bsc#1060360, CVE-2017-14493: stack based overflow.
* bsc#1060361, CVE-2017-14494: DHCP - info leak.
* bsc#1060362, CVE-2017-14495: DNS - OOM DoS.
* bsc#1060364, CVE-2017-14496: DNS - DoS Integer underflow.
* Fix DHCP relaying, broken in 2.76 and 2.77.
* For other changes, see
http://www.thekelleys.org.uk/dnsmasq/CHANGELOG
- Obsoleted patches:
* Fix-crash-introduced-in-2675f2061525bc954be14988d643.patch
* Handle-binding-upstream-servers-to-an-interface.patch
-------------------------------------------------------------------
Tue Sep 12 08:29:59 UTC 2017 - tchvatal@suse.com
- Fix /srv/tftpboot permissions wrt bsc#940608
-------------------------------------------------------------------
Fri Aug 18 11:16:03 UTC 2017 - dmueller@suse.com
- reload system dbus to pick up policy change on install (bsc#1054429)
-------------------------------------------------------------------
Wed Jan 4 17:29:37 UTC 2017 - martin.wilck@suse.com
- Handle binding upstream servers to an interface if interface
is destroyed and recreated (boo#1018160)
Added two patches from upstream:
* added Handle-binding-upstream-servers-to-an-interface.patch
* added Fix-crash-introduced-in-2675f2061525bc954be14988d643.patch
-------------------------------------------------------------------
Wed Aug 3 13:46:06 UTC 2016 - max@suse.com
- Update to 2.76:
* Include 0.0.0.0/8 in DNS rebind checks.
* Enhance --add-subnet to allow arbitrary subnet addresses.
* Respect the --no-resolv flag in inotify code. Fixes bug
which caused dnsmasq to fail to start if a resolv-file
was a dangling symbolic link, even of --no-resolv set.
* Fix crash when an A or AAAA record is defined locally,
in a hosts file, and an upstream server sends a reply
that the same name is empty (CVE-2015-8899, bsc#983273).
* Fix failure to correctly calculate cache-size when reading a
hosts-file fails.
* Fix wrong answer to simple name query when --domain-needed
set, but no upstream servers configured.
* Return REFUSED when running out of forwarding table slots,
not SERVFAIL.
* Add --max-port configuration.
* Add --script-arp and two new functions for the dhcp-script.
* Extend --add-mac to allow a new encoding of the MAC address
as base64, by configurting --add-mac=base64
* Add --add-cpe-id option.
* Don't crash with divide-by-zero if an IPv6 dhcp-range is
declared as a whole /64.
(ie xx::0 to xx::ffff:ffff:ffff:ffff)
* Add support for a TTL parameter in --host-record and --cname.
* Add --dhcp-ttl option.
* Add --tftp-mtu option.
* Check return-code of inet_pton() when parsing dhcp-option.
* Fix wrong value for EDNS UDP packet size when using
--servers-file to define upstream DNS servers.
* Add dhcp_release6 to contrib/lease-tools.
-------------------------------------------------------------------
Thu Jun 16 12:39:18 UTC 2016 - max@suse.com
- dnsmasq-groups.patch: Initialize the supplementary groups of the
dnsmasq user (bsc#859298).
-------------------------------------------------------------------
Tue Feb 2 21:34:39 UTC 2016 - mpluskal@suse.com
- Add gpg signature
-------------------------------------------------------------------
Mon Aug 24 18:10:01 UTC 2015 - stefan.bruens@rwth-aachen.de
- spec file cleanup, get rid of redifinition warnings
-------------------------------------------------------------------
Tue Aug 11 01:41:02 UTC 2015 - stefan.bruens@rwth-aachen.de
- Update to 2.75, announce message:
Fix reversion on 2.74 which caused 100% CPU use when a
dhcp-script is configured. Thanks to Adrian Davey for
reporting the bug and testing the fix.
- Update to 2.74, announce message:
Fix reversion in 2.73 where --conf-file would attempt to
read the default file, rather than no file.
Fix inotify code to handle dangling symlinks better and
not SEGV in some circumstances.
DNSSEC fix. In the case of a signed CNAME generated by a
wildcard which pointed to an unsigned domain, the wrong
status would be logged, and some necessary checks omitted.
- Update to 2.73, announce message:
Fix crash at startup when an empty suffix is supplied to
--conf-dir, also trivial memory leak. Thanks to
Tomas Hozza for spotting this.
Remove floor of 4096 on advertised EDNS0 packet size when
DNSSEC in use, the original rationale for this has long gone.
Thanks to Anders Kaseorg for spotting this.
Use inotify for checking on updates to /etc/resolv.conf and
friends under Linux. This fixes race conditions when the files are
updated rapidly and saves CPU by noy polling. To build
a binary that runs on old Linux kernels without inotify,
use make COPTS=-DNO_INOTIFY
Fix breakage of --domain=<domain>,<subnet>,local - only reverse
queries were intercepted. THis appears to have been broken
since 2.69. Thanks to Josh Stone for finding the bug.
Eliminate IPv6 privacy addresses and deprecated addresses from
the answers given by --interface-name. Note that reverse queries
(ie looking for names, given addresses) are not affected.
Thanks to Michael Gorbach for the suggestion.
Fix crash in DNSSEC code with long RRs. Thanks to Marco Davids
for the bug report.
Add --ignore-address option. Ignore replies to A-record
queries which include the specified address. No error is
generated, dnsmasq simply continues to listen for another
reply. This is useful to defeat blocking strategies which
rely on quickly supplying a forged answer to a DNS
request for certain domains, before the correct answer can
arrive. Thanks to Glen Huang for the patch.
Revisit the part of DNSSEC validation which determines if an
unsigned answer is legit, or is in some part of the DNS
tree which should be signed. Dnsmasq now works from the
DNS root downward looking for the limit of signed
delegations, rather than working bottom up. This is
both more correct, and less likely to trip over broken
nameservers in the unsigned parts of the DNS tree
which don't respond well to DNSSEC queries.
Add --log-queries=extra option, which makes logs easier
to search automatically.
Add --min-cache-ttl option. I've resisted this for a long
time, on the grounds that disbelieving TTLs is never a
good idea, but I've been persuaded that there are
sometimes reasons to do it. (Step forward, GFW).
To avoid misuse, there's a hard limit on the TTL
floor of one hour. Thansk to RinSatsuki for the patch.
Cope with multiple interfaces with the same link-local
address. (IPv6 addresses are scoped, so this is allowed.)
Thanks to Cory Benfield for help with this.
Add --dhcp-hostsdir. This allows addition of new host
configurations to a running dnsmasq instance much more
cheaply than having dnsmasq re-read all its existing
configuration each time.
Don't reply to DHCPv6 SOLICIT messages if we're not
configured to do stateful DHCPv6. Thanks to Win King Wan
for the patch.
Fix broken DNSSEC validation of ECDSA signatures.
Add --dnssec-timestamp option, which provides an automatic
way to detect when the system time becomes valid after
boot on systems without an RTC, whilst allowing DNS
queries before the clock is valid so that NTP can run.
Thanks to Kevin Darbyshire-Bryant for developing this idea.
Add --tftp-no-fail option. Thanks to Stefan Tomanek for
the patch.
Fix crash caused by looking up servers.bind, CHAOS text
record, when more than about five --servers= lines are
in the dnsmasq config. This causes memory corruption
which causes a crash later. Thanks to Matt Coddington for
sterling work chasing this down.
Fix crash on receipt of certain malformed DNS requests.
Thanks to Nick Sampanis for spotting the problem.
Note that this is could allow the dnsmasq process's
memory to be read by an attacker under certain
circumstances, so it has a CVE, CVE-2015-3294
Fix crash in authoritative DNS code, if a .arpa zone
is declared as authoritative, and then a PTR query which
is not to be treated as authoritative arrived. Normally,
directly declaring .arpa zone as authoritative is not
done, so this crash wouldn't be seen. Instead the
relevant .arpa zone should be specified as a subnet
in the auth-zone declaration. Thanks to Johnny S. Lee
for the bugreport and initial patch.
Fix authoritative DNS code to correctly reply to NS
and SOA queries for .arpa zones for which we are
declared authoritative by means of a subnet in auth-zone.
Previously we provided correct answers to PTR queries
in such zones (including NS and SOA) but not direct
NS and SOA queries. Thanks to Johnny S. Lee for
pointing out the problem.
Fix logging of DHCPREPLY which should be suppressed
by quiet-dhcp6. Thanks to J. Pablo Abonia for
spotting the problem.
Try and handle net connections with broken fragmentation
that lose large UDP packets. If a server times out,
reduce the maximum UDP packet size field in the EDNS0
header to 1280 bytes. If it then answers, make that
change permanent.
Check IPv4-mapped IPv6 addresses when --stop-rebind
is active. Thanks to Jordan Milne for spotting this.
Allow DHCPv4 options T1 and T2 to be set using --dhcp-option.
Thanks to Kevin Benton for patches and work on this.
Fix code for DHCPCONFIRM DHCPv6 messages to confirm addresses
in the correct subnet, even of not in dynamic address
allocation range. Thanks to Steve Hirsch for spotting
the problem.
Add AddDhcpLease and DeleteDhcpLease DBus methods. Thanks
to Nicolas Cavallari for the patch.
Allow configuration of router advertisements without the
"on-link" bit set. Thanks to Neil Jerram for the patch.
Extend --bridge-interface to DHCPv6 and router
advertisements. Thanks to Neil Jerram for the patch.
-------------------------------------------------------------------
Wed Jun 17 01:45:33 UTC 2015 - crrodriguez@opensuse.org
- dnsmasq.service: Order Before=nss-lookup.target and
Wants=nss-lookup.target as this service may provide
name resolution even for the localhost.
-------------------------------------------------------------------
Mon Apr 20 12:14:54 UTC 2015 - abergmann@suse.com
- Move trust-anchors.conf into /etc/dnsmasq.d to be AppArmor conform.
(bnc#908137)
-------------------------------------------------------------------
Tue Jan 6 09:58:25 UTC 2015 - jslaby@suse.com
- The change from Wed Dec 24 messed group w/ user IDs. Switch them
back and be more careful w/ what is changed.
-------------------------------------------------------------------
Mon Dec 29 09:37:54 UTC 2014 - dimstar@opensuse.org
- Fix symlink of rcFOO to /usr/sbin/service, resolving a dangling
symlink lint warning (and remove the same from rpmlintrc).
-------------------------------------------------------------------
Thu Dec 25 06:32:18 UTC 2014 - nemysis@gmx.ch
- Remove from spec group_and_isc.patch, forgotten in previous commit
-------------------------------------------------------------------
Wed Dec 24 22:29:52 UTC 2014 - nemysis@gmx.ch
- Update to 2.72, announce message:
Add ra-advrouter mode, for RFC-3775 mobile IPv6 support.
Add support for "ipsets" in *BSD, using pf. Thanks to
Sven Falempim for the patch.
Fix race condition which could lock up dnsmasq when an
interface goes down and up rapidly. Thanks to Conrad
Kostecki for helping to chase this down.
Add DBus methods SetFilterWin2KOption and SetBogusPrivOption
Thanks to the Smoothwall project for the patch.
Fix failure to build against Nettle-3.0. Thanks to Steven
Barth for spotting this and finding the fix.
When assigning existing DHCP leases to intefaces by comparing
networks, handle the case that two or more interfaces have the
same network part, but different prefix lengths (favour the
longer prefix length.) Thanks to Lung-Pin Chang for the
patch.
Add a mode which detects and removes DNS forwarding loops, ie
a query sent to an upstream server returns as a new query to
dnsmasq, and would therefore be forwarded again, resulting in
a query which loops many times before being dropped. Upstream
servers which loop back are disabled and this event is logged.
Thanks to Smoothwall for their sponsorship of this feature.
Extend --conf-dir to allow filtering of files. So
--conf-dir=/etc/dnsmasq.d,\*.conf
will load all the files in /etc/dnsmasq.d which end in .conf
Fix bug when resulted in NXDOMAIN answers instead of NODATA in
some circumstances.
Fix bug which caused dnsmasq to become unresponsive if it
failed to send packets due to a network interface disappearing.
Thanks to Niels Peen for spotting this.
Fix problem with --local-service option on big-endian platforms
Thanks to Richard Genoud for the patch.
- Add dnsmasq-rpmlintrc, for false positive scripts and symlink
- Add BuildRequires for dos2unix
- Use sed instead of simple patch group_and_isc.patch
-------------------------------------------------------------------
Sun Nov 9 09:30:07 UTC 2014 - seife+obs@b1-systems.com
- fix logging, PrivateDevices=yes kills it (bnc#902511, bnc#904537)
-------------------------------------------------------------------
Tue Aug 26 14:05:14 CEST 2014 - dsterba@suse.cz
- enable DNSSEC
- require libnettle
- package trust-anchors.conf
- spec fixes:
- define HAVE_ flags on commandline, otherwise 'dnsmasq --version'
will not correctly reflect the feature status
-------------------------------------------------------------------
Fri Aug 22 07:08:36 UTC 2014 - meissner@suse.com
- actually build with relro and pie. (bnc#893057)
-------------------------------------------------------------------
Wed Aug 6 06:48:20 UTC 2014 - vwallfahrer@suse.com
- Removed Suse and all other OS/Distribution related subdirs from
contrib, so only the rest gets packaged. The subdirs are not
necessary anymore (bnc#889028).
-------------------------------------------------------------------
Tue Aug 5 08:19:42 UTC 2014 - vwallfahrer@suse.com
- Removed README.SUSE file, it was to confusing and not necessary (bnc#889972).
Information is already present in the upstream documentation.
- Split up vendor-files.tar.bz2 into single files
- Comply with systemd packaging guidlines
-------------------------------------------------------------------
Thu Jun 12 08:15:29 UTC 2014 - cdenicolo@suse.com
- license update: GPL-2.0 or GPL-3.0
correct license is dual GPL-2.0 or GPL-3.0; please add COPYING-v3-file to
RPM.
-------------------------------------------------------------------
Wed Jun 11 15:27:24 UTC 2014 - dmueller@suse.com
- update to 2.71:
Subtle change to error handling to help DNSSEC validation
when servers fail to provide NODATA answers for
non-existent DS records.
Tweak code which removes DNSSEC records from answers when
not required. Fixes broken answers when additional section
has real records in it. Thanks to Marco Davids for the bug
report.
Fix DNSSEC validation of ANY queries. Thanks to Marco Davids
for spotting that too.
Fix total DNS failure and 100% CPU use if cachesize set to zero,
regression introduced in 2.69. Thanks to James Hunt and
the Ubuntu crowd for assistance in fixing this.
Fix crash, introduced in 2.69, on TCP request when dnsmasq
compiled with DNSSEC support, but running without DNSSEC
enabled. Thanks to Manish Sing for spotting that one.
Fix regression which broke ipset functionality. Thanks to
Wang Jian for the bug report.
Implement dynamic interface discovery on *BSD. This allows
the contructor: syntax to be used in dhcp-range for DHCPv6
on the BSD platform. Thanks to Matthias Andree for
valuable research on how to implement this.
Fix infinite loop associated with some --bogus-nxdomain
configs. Thanks fogobogo for the bug report.
Fix missing RA RDNS option with configuration like
--dhcp-option=option6:23,[::] Thanks to Tsachi Kimeldorfer
for spotting the problem.
Add [fd00::] and [fe80::] as special addresses in DHCPv6
options, analogous to [::]. [fd00::] is replaced with the
actual ULA of the interface on the machine running
dnsmasq, [fe80::] with the link-local address.
Thanks to Tsachi Kimeldorfer for championing this.
DNSSEC validation and caching. Dnsmasq needs to be
compiled with this enabled, with
make dnsmasq COPTS=-DHAVE_DNSSEC
this add dependencies on the nettle crypto library and the
gmp maths library. It's possible to have these linked
statically with
make dnsmasq COPTS='-DHAVE_DNSSEC -DHAVE_DNSSEC_STATIC'
which bloats the dnsmasq binary, but saves the size of
the shared libraries which are much bigger.
To enable, DNSSEC, you will need a set of
trust-anchors. Now that the TLDs are signed, this can be
the keys for the root zone, and for convenience they are
included in trust-anchors.conf in the dnsmasq
distribution. You should of course check that these are
legitimate and up-to-date. So, adding
conf-file=/path/to/trust-anchors.conf
dnssec
to your config is all thats needed to get things
working. The upstream nameservers have to be DNSSEC-capable
too, of course. Many ISP nameservers aren't, but the
Google public nameservers (8.8.8.8 and 8.8.4.4) are.
When DNSSEC is configured, dnsmasq validates any queries
for domains which are signed. Query results which are
bogus are replaced with SERVFAIL replies, and results
which are correctly signed have the AD bit set. In
addition, and just as importantly, dnsmasq supplies
correct DNSSEC information to clients which are doing
their own validation, and caches DNSKEY, DS and RRSIG
records, which significantly improve the performance of
downstream validators. Setting --log-queries will show
DNSSEC in action.
If a domain is returned from an upstream nameserver without
DNSSEC signature, dnsmasq by default trusts this. This
means that for unsigned zone (still the majority) there
is effectively no cost for having DNSSEC enabled. Of course
this allows an attacker to replace a signed record with a
false unsigned record. This is addressed by the
--dnssec-check-unsigned flag, which instructs dnsmasq
to prove that an unsigned record is legitimate, by finding
a secure proof that the zone containing the record is not
signed. Doing this has costs (typically one or two extra
upstream queries). It also has a nasty failure mode if
dnsmasq's upstream nameservers are not DNSSEC capable.
Without --dnssec-check-unsigned using such an upstream
server will simply result in not queries being validated;
with --dnssec-check-unsigned enabled and a
DNSSEC-ignorant upstream server, _all_ queries will fail.
Note that DNSSEC requires that the local time is valid and
accurate, if not then DNSSEC validation will fail. NTP
should be running. This presents a problem for routers
without a battery-backed clock. To set the time needs NTP
to do DNS lookups, but lookups will fail until NTP has run.
To address this, there's a flag, --dnssec-no-timecheck
which disables the time checks (only) in DNSSEC. When dnsmasq
is started and the clock is not synced, this flag should
be used. As soon as the clock is synced, SIGHUP dnsmasq.
The SIGHUP clears the cache of partially-validated data and
resets the no-timecheck flag, so that all DNSSEC checks
henceforward will be complete.
The development of DNSSEC in dnsmasq was started by
Giovanni Bajo, to whom huge thanks are owed. It has been
supported by Comcast, whose techfund grant has allowed for
an invaluable period of full-time work to get it to
a workable state.
Add --rev-server. Thanks to Dave Taht for suggesting this.
Add --servers-file. Allows dynamic update of upstream servers
full access to configuration.
Add --local-service. Accept DNS queries only from hosts
whose address is on a local subnet, ie a subnet for which
an interface exists on the server. This option
only has effect if there are no --interface --except-interface,
--listen-address or --auth-server options. It is intended
to be set as a default on installation, to allow
unconfigured installations to be useful but also safe from
being used for DNS amplification attacks.
Fix crashes in cache_get_cname_target() when dangling CNAMEs
encountered. Thanks to Andy and the rt-n56u project for
find this and helping to chase it down.
Fix wrong RCODE in authoritative DNS replies to PTR queries. The
correct answer was included, but the RCODE was set to NXDOMAIN.
Thanks to Craig McQueen for spotting this.
Make statistics available as DNS queries in the .bind TLD as
well as logging them.
Use random addresses for DHCPv6 temporary address
allocations, instead of algorithmically determined stable
addresses.
Fix bug which meant that the DHCPv6 DUID was not available
in DHCP script runs during the lifetime of the dnsmasq
process which created the DUID de-novo. Once the DUID was
created and stored in the lease file and dnsmasq
restarted, this bug disappeared.
Fix bug introduced in 2.67 which could result in erroneous
NXDOMAIN returns to CNAME queries.
Fix build failures on MacOS X and openBSD.
Allow subnet specifications in --auth-zone to be interface
names as well as address literals. This makes it possible
to configure authoritative DNS when local address ranges
are dynamic and works much better than the previous
work-around which exempted contructed DHCP ranges from the
IP address filtering. As a consequence, that work-around
is removed. Under certain circumstances, this change wil
break existing configuration: if you're relying on the
contructed-range exception, you need to change --auth-zone
to specify the same interface as is used to construct your
DHCP ranges, probably with a trailing "/6" like this:
--auth-zone=example.com,eth0/6 to limit the addresses to
IPv6 addresses of eth0.
Fix problems when advertising deleted IPv6 prefixes. If
the prefix is deleted (rather than replaced), it doesn't
get advertised with zero preferred time. Thanks to Tsachi
for the bug report.
Fix segfault with some locally configured CNAMEs. Thanks
to Andrew Childs for spotting the problem.
Fix memory leak on re-reading /etc/hosts and friends,
introduced in 2.67.
Check the arrival interface of incoming DNS and TFTP
requests via IPv6, even in --bind-interfaces mode. This
isn't possible for IPv4 and can generate scary warnings,
but as it's always possible for IPv6 (the API always
exists) then we should do it always.
Tweak the rules on prefix-lengths in --dhcp-range for
IPv6. The new rule is that the specified prefix length
must be larger than or equal to the prefix length of the
corresponding address on the local interface.
Fix crash if upstream server returns SERVFAIL when
--conntrack in use. Thanks to Giacomo Tazzari for finding
this and supplying the patch.
Repair regression in 2.64. That release stopped sending
lease-time information in the reply to DHCPINFORM
requests, on the correct grounds that it was a standards
violation. However, this broke the dnsmasq-specific
dhcp_lease_time utility. Now, DHCPINFORM returns
lease-time only if it's specifically requested
(maintaining standards) and the dhcp_lease_time utility
has been taught to ask for it (restoring functionality).
Fix --dhcp-match, --dhcp-vendorclass and --dhcp-userclass
to work with BOOTP and well as DHCP. Thanks to Peter
Korsgaard for spotting the problem.
Add --synth-domain. Thanks to Vishvananda Ishaya for
suggesting this.
Fix failure to compile ipset.c if old kernel headers are
in use. Thanks to Eugene Rudoy for pointing this out.
Handle IPv4 interface-address labels in Linux. These are
often used to emulate the old IP-alias addresses. Before,
using --interface=eth0 would service all the addresses of
eth0, including ones configured as aliases, which appear
in ifconfig as eth0:0. Now, only addresses with the label
eth0 are active. This is not backwards compatible: if you
want to continue to bind the aliases too, you need to add
eg. --interface=eth0:0 to the config.
Fix "failed to set SO_BINDTODEVICE on DHCP socket: Socket
operation on non-socket" error on startup with
configurations which have exactly one --interface option
and do RA but _not_ DHCPv6. Thanks to Trever Adams for the
bug report.
Generalise --interface-name to cope with IPv6 addresses
and multiple addresses per interface per address family.
Fix option parsing for --dhcp-host, which was generating a
spurious error when all seven possible items were
included. Thanks to Zhiqiang Wang for the bug report.
Remove restriction on prefix-length in --auth-zone. Thanks
to Toke Hoiland-Jorgensen for suggesting this.
Log when the maximum number of concurrent DNS queries is
reached. Thanks to Marcelo Salhab Brogliato for the patch.
If wildcards are used in --interface, don't assume that
there will only ever be one available interface for DHCP
just because there is one at start-up. More may appear, so
we can't use SO_BINDTODEVICE. Thanks to Natrio for the bug
report.
Increase timeout/number of retries in TFTP to accomodate
AudioCodes Voice Gateways doing streaming writes to flash.
Thanks to Damian Kaczkowski for spotting the problem.
Fix crash with empty DHCP string options when adding zero
terminator. Thanks to Patrick McLean for the bug report.
Allow hostnames to start with a number, as allowed in
RFC-1123. Thanks to Kyle Mestery for the patch.
Fixes to DHCP FQDN option handling: don't terminate FQDN
if domain not known and allow a FQDN option with blank
name to request that a FQDN option is returned in the
reply. Thanks to Roy Marples for the patch.
Make --clear-on-reload apply to setting upstream servers
via DBus too.
When the address which triggered the construction of an
advertised IPv6 prefix disappears, continue to advertise
the prefix for up to 2 hours, with the preferred lifetime
set to zero. This satisfies RFC 6204 4.3 L-13 and makes
things work better if a prefix disappears without being
deprecated first. Thanks to Uwe Schindler for persuasively
arguing for this.
Fix MAC address enumeration on *BSD. Thanks to Brad Smith
for the bug report.
Support RFC-4242 information-refresh-time options in the
reply to DHCPv6 information-request. The lease time of the
smallest valid dhcp-range is sent. Thanks to Uwe Schindler
for suggesting this.
Make --listen-address higher priority than --except-interface
in all circumstances. Thanks to Thomas Hood for the bugreport.
Provide independent control over which interfaces get TFTP
service. If enable-tftp is given a list of interfaces, then TFTP
is provided on those. Without the list, the previous behaviour
(provide TFTP to the same interfaces we provide DHCP to)
is retained. Thanks to Lonnie Abelbeck for the suggestion.
Add --dhcp-relay config option. Many thanks to vtsl.net
for sponsoring this development.
Fix crash with empty tag: in --dhcp-range. Thanks to
Kaspar Schleiser for the bug report.
Add "baseline" and "bloatcheck" makefile targets, for
revealing size changes during development. Thanks to
Vladislav Grishenko for the patch.
Cope with DHCPv6 clients which send REQUESTs without
address options - treat them as SOLICIT with rapid commit.
Support identification of clients by MAC address in
DHCPv6. When using a relay, the relay must support RFC
6939 for this to work. It always works for directly
connected clients. Thanks to Vladislav Grishenko
for prompting this feature.
Remove the rule for constructed DHCP ranges that the local
address must be either the first or last address in the
range. This was originally to avoid SLAAC addresses, but
we now explicitly autoconfig and privacy addresses instead.
Update Polish translation. Thanks to Jan Psota.
Fix problem in DHCPv6 vendorclass/userclass matching
code. Thanks to Tanguy Bouzeloc for the patch.
Update Spanish transalation. Thanks to Vicente Soriano.
Add --ra-param option. Thanks to Vladislav Grishenko for
inspiration on this.
Add --add-subnet configuration, to tell upstream DNS
servers where the original client is. Thanks to DNSthingy
for sponsoring this feature.
Add --quiet-dhcp, --quiet-dhcp6 and --quiet-ra. Thanks to
Kevin Darbyshire-Bryant for the initial patch.
Allow A/AAAA records created by --interface-name to be the
target of --cname. Thanks to Hadmut Danisch for the
suggestion.
Avoid treating a --dhcp-host which has an IPv6 address
as eligable for use with DHCPv4 on the grounds that it has
no address, and vice-versa. Thanks to Yury Konovalov for
spotting the problem.
Do a better job caching dangling CNAMEs. Thanks to Yves
Dorfsman for spotting the problem.
Add the ability to act as an authoritative DNS
server. Dnsmasq can now answer queries from the wider 'net
with local data, as long as the correct NS records are set
up. Only local data is provided, to avoid creating an open
DNS relay. Zone transfer is supported, to allow secondary
servers to be configured.
Add "constructed DHCP ranges" for DHCPv6. This is intended
for IPv6 routers which get prefixes dynamically via prefix
delegation. With suitable configuration, stateful DHCPv6
and RA can happen automatically as prefixes are delegated
and then deprecated, without having to re-write the
dnsmasq configuration file or restart the daemon. Thanks to
Steven Barth for extensive testing and development work on
this idea.
Fix crash on startup on Solaris 11. Regression probably
introduced in 2.61. Thanks to Geoff Johnstone for the
patch.
Add code to make behaviour for TCP DNS requests that same
as for UDP requests, when a request arrives for an allowed
address, but via a banned interface. This change is only
active on Linux, since the relevant API is missing (AFAIK)
on other platforms. Many thanks to Tomas Hozza for
spotting the problem, and doing invaluable discovery of
the obscure and undocumented API required for the solution.
Don't send the default DHCP option advertising dnsmasq as
the local DNS server if dnsmasq is configured to not act
as DNS server, or it's configured to a non-standard port.
Add DNSMASQ_CIRCUIT_ID, DNSMASQ_SUBCRIBER_ID,
DNSMASQ_REMOTE_ID variables to the environment of the
lease-change script (and the corresponding Lua). These hold
information inserted into the DHCP request by a DHCP relay
agent. Thanks to Lakefield Communications for providing a
bounty for this addition.
Fixed crash, introduced in 2.64, whilst handling DHCPv6
information-requests with some common configurations.
Thanks to Robert M. Albrecht for the bug report and
chasing the problem.
Add --ipset option. Thanks to Jason A. Donenfeld for the
patch.
Don't erroneously reject some option names in --dhcp-match
options. Thanks to Benedikt Hochstrasser for the bug report.
Allow a trailing '*' wildcard in all interface-name
configurations. Thanks to Christian Parpart for the patch.
Handle the situation where libc headers define
SO_REUSEPORT, but the kernel in use doesn't, to cope with
the introduction of this option to Linux. Thanks to Rich
Felker for the bug report.
Update Polish translation. Thanks to Jan Psota.
Fix crash if the configured DHCP lease limit is
reached. Regression occurred in 2.61. Thanks to Tsachi for
the bug report.
Update the French translation. Thanks to Gildas le Nadan.
-------------------------------------------------------------------
Wed Mar 26 16:56:34 UTC 2014 - crrodriguez@opensuse.org
- dnsmasq.service: Set PrivateDevices=yes so we run in a
separate namespace with the bare minimum device nodes isolated
from the host.
-------------------------------------------------------------------
Mon Apr 22 11:34:35 UTC 2013 - meissner@suse.com
- reintroduced /sbin/rcdnsmasq as /sbin/service link.
-------------------------------------------------------------------
Sat Apr 20 05:54:35 UTC 2013 - crrodriguez@opensuse.org
- Do not order after syslog.target which it is neither
required not recommended and currently no longer even exists.
-------------------------------------------------------------------
Sat Apr 13 16:04:18 UTC 2013 - coolo@suse.com
- sync /srv/tftpboot directory attributes with atftp package
-------------------------------------------------------------------
Wed Apr 3 23:09:10 UTC 2013 - crrodriguez@opensuse.org
- remove all sysvinit support
-------------------------------------------------------------------
Tue Mar 12 18:09:40 UTC 2013 - vuntz@suse.com
- Create a utils subpackage to include DHCP lease management utils
(that are living in contrib/wrt):
+ Explicitly build them in %build and install the files in
%install.
+ Summary and description of the new subpackage are taken from
Fedora.
-------------------------------------------------------------------
Fri Feb 22 12:53:03 UTC 2013 - rmilasan@suse.com
- Install dnsmasq.service accordingly (/usr/lib/systemd for 12.3
and up or /lib/systemd for older versions).
-------------------------------------------------------------------
Fri Dec 14 15:32:27 UTC 2012 - toganm@opensuse.org
- Update to version 2.65. For other changes relating to other
versions in between please see the CHANGELOG
* Fix regression which broke forwarding orgf queries sent via
TCP which are not for A and AAAA and which were directed to
non-default servers. Thanks to Niax for the bug reportst.
Fix failure to build with DHCP support excluded. Thanks to
Gustavo Zacarias for the patch.
Fix nasty regression in 27.64 which completely broke cacheing.
- renamed group_and_isc.diff to group_and_isc.patch rebasinp to -p1
level as outlined in the documentation at
http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines
-------------------------------------------------------------------
Thu Oct 4 07:32:36 UTC 2012 - cfarrell@suse.com
- license update: GPL-2.0
Most of the source code files give a choice of either GPL-2.0 or GPL-3.0
(not GPL-2.0+). The website states that the COPYING file in the
distribution is the official license - in this case it is GPL-2.0. This
is consistent with what Fedora state about the package. Accordingly, I^d
be ok with License: GPL-2.0 or License: (GPL-2.0 or GPL-3.0) but not
License: GPL-2.0+
-------------------------------------------------------------------
Sun Jun 24 03:51:58 UTC 2012 - crrodriguez@opensuse.org
- Update to version 2.62, misc bugfixes
- Fix CFLAGS/LDFLAGS usage
- fix the small cache size problem in a different way by tweaking
the build config instead.
-------------------------------------------------------------------
Sat Jun 23 03:53:32 UTC 2012 - crrodriguez@opensuse.org
- The default cache size is way too small (150 entries) use a sane
default of 2000 as used in *WRT embeeded routers which is still
very conservative for a desktop/server machine.
- use async logging
-------------------------------------------------------------------
Sun Apr 29 19:16:43 UTC 2012 - pascal.bleser@opensuse.org
- update to 2.61:
* add ra-names, ra-stateless and slaac keywords for DHCPv6: dnsmasq can now
synthesise AAAA records for dual-stack hosts which get IPv6 addresses via
SLAAC; it is also now possible to use SLAAC and stateless DHCPv6, and to
tell clients to use SLAAC addresses as well as DHCP ones
* add --dhcp-duid to allow DUID-EN uids to be used
* explicity send DHCPv6 replies to the correct port, instead of relying on
clients to send requests with the correct source address, since at least
one client in the wild gets this wrong
* send a preference value of 255 in DHCPv6 replies when --dhcp-authoritative
is in effect: his tells clients not to wait around for other DHCP servers
* better logging of DHCPv6 options
* add --host-record
* invoke the DHCP script with action "tftp" when a TFTP file transfer
completes: the size of the file, address to which it was sent and complete
pathname are supplied; note that version 2.60 introduced some script
incompatibilties associated with DHCPv6, and this is a further change; to
be safe, scripts should ignore unknown actions, and if not IPv6-aware,
should exit if the environment variable DNSMASQ_IAID is set; the use-case
for this is to track netboot/install
* update contrib/port-forward/dnsmasq-portforward to reflect the above
* set the environment variable DNSMASQ_LOG_DHCP when running the script id
--log-dhcp is in effect, so that script can taylor their logging verbosity
* arrange that addresses specified with --listen-address work even if there
is no interface carrying the address; this is chiefly useful for IPv4
loopback addresses, where any address in 127.0.0.0/8 is a valid loopback
address, but normally only 127.0.0.1 appears on the lo interface
* fix crash, introduced in 2.60, when a DHCPINFORM is received from a network
which has no valid dhcp-range
* add a new DHCP lease time keyword, "deprecated" for --dhcp-range: this is
only valid for IPv6, and sets the preffered lease time for both DHCP and RA
to zero; the effect is that clients can continue to use the address for
existing connections, but new connections will use other addresses, if they
exist; this makes hitless renumbering at least possible
* fix bug in address6_available() which caused DHCPv6 lease aquistion to fail
if more than one dhcp-range in use
* provide RDNSS and DNSSL data in router advertisements, using the settings
provided for DHCP options option6:domain-search and option6:dns-server
* don't cache data from non-recursive nameservers, since it may erroneously
look like a valid CNAME to a non-exitant name
* call SO_BINDTODEVICE on the DHCP socket(s) when doing DHCP on exacly one
interface and --bind-interfaces is set; this makes the OpenStack use-case
of one dnsmasq per virtual interface work
* give correct from-cache answers to explict CNAME queries
* add --tftp-lowercase option
* ensure that the DBus DhcpLeaseUpdated events are generated when a lease
goes through INIT_REBOOT state, even if the dhcp-script is not in use
-------------------------------------------------------------------
Tue Mar 6 10:13:09 CET 2012 - ug@suse.de
- some dhcp fixes
- Add Lua integration
- Set TOS on DHCP sockets
- Improve start-up speed when reading large hosts files
- Fix problem if dnsmasq is started without the stdin
- Allow the TFP server or boot server in --pxe-service
- Support DHCPv6. Support is there for the sort of things
the existing v4 server does, including tags, options,
static addresses and relay support
- Support IPv6 router advertisements
- Fix long-standing wrinkle with --localise-queries that
could result in wrong answers when DNS packets arrive
via an interface other than the expected one
- 2.60
-------------------------------------------------------------------
Wed Feb 8 16:56:35 CET 2012 - ug@suse.de
- added correct group for tftp
(bnc#738905)
-------------------------------------------------------------------
Mon Feb 6 22:25:05 UTC 2012 - crrodriguez@opensuse.org
- Use systemd macros correctly
- build with PIE and full RELRO.
-------------------------------------------------------------------
Thu Jan 19 04:22:44 UTC 2012 - crrodriguez@opensuse.org
- --enable-dbus must be explicit in systemd unit
- default user is provided in config file or takes defaults on
group_and_isc.diff
-------------------------------------------------------------------
Wed Jan 18 21:34:25 UTC 2012 - crrodriguez@opensuse.org
- dnsmasq has dbus support, use it for systemd service.
-------------------------------------------------------------------
Fri Nov 25 13:14:41 CET 2011 - ug@suse.de
- removed systemd config for pre-12.1
-------------------------------------------------------------------
Thu Nov 24 20:45:37 UTC 2011 - crrodriguez@opensuse.org
- Must be of type forking and change uid to dnsmasq
-------------------------------------------------------------------
Thu Nov 24 20:19:11 UTC 2011 - crrodriguez@opensuse.org
- Add systemd startup script
-------------------------------------------------------------------
Thu Oct 20 15:58:50 CEST 2011 - ug@suse.de
- dnsmasq still announced itself as 2.59-RC1
no other code changes than just the correct version string
-------------------------------------------------------------------
Tue Oct 18 23:13:12 CEST 2011 - ug@suse.de
- fixed binding to IPv6 link-local addresses
(regression from 2.58)
- 2.59
-------------------------------------------------------------------
Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de
- Remove redundant tags/sections from specfile
(cf. packaging guidelines)
- Use %_smp_mflags for parallel build
-------------------------------------------------------------------
Fri Aug 26 21:12:04 CEST 2011 - ug@suse.de
- Support scope-ids in IPv6 addresses of nameservers from
/etc/resolv.conf and in --server options
- Fix bug which resulted in truncated files and timeouts for
some TFTP transfers
- Allow the TFTP-server address in --dhcp-boot to be a
domain-name which is looked up in /etc/hosts
- Tweak the behaviour of --domain-needed
- Add support for Linux conntrack connection marking
- Don't return NXDOMAIN to an AAAA query if we have CNAME
which points to an A record only
- logging fixes
- many DHCP fixes and features (see Changelog)
- update to 2.58
-------------------------------------------------------------------
Wed Mar 2 09:52:12 CET 2011 - ug@suse.de
- Add IPv6 support to the TFTP server
- Log DNS queries at level LOG_INFO
- Add --add-mac option
- some logging fixes
- Don't complain about strings longer than
255 characters in txt records
- extended the --domain option
- Never cache DNS replies which have the 'cd' bit set
- Add --proxy-dnssec flag
- Allow a filename of "-" for --conf-file
- some smaller bugfixes
- update to 2.57
-------------------------------------------------------------------
Tue Jun 8 09:31:21 CEST 2010 - ug@suse.de
* Fix crash when /etc/ethers is in use.
* Fix crash in netlink_multicast().
* Allow the empty domain "." in dhcp domain-search (119)
options.
* 2.55 (there was no 2.54)
-------------------------------------------------------------------
Mon Jun 7 11:47:58 CEST 2010 - ug@suse.de
* Fixed bug which caused bad things to happen if a
resolv.conf file which exists is subsequently removed
* Rationalised the DHCP tag system
* Added --tag-if to allow boolean operations on tags
* Add broadcast/unicast information to DHCP logging
* Allow --dhcp-broadcast to be unconditional
* Fixed incorrect behaviour with NOT <tag> conditionals in
dhcp-options
* If we send vendor-class encapsulated options based on the
vendor-class supplied by the client, and no explicit
vendor-class option is given, echo back the vendor-class
from the client.
* Fix bug which stopped dnsmasq from matching both a
circuitid and a remoteid
* Add --dhcp-proxy
* Added interface:<iface name> part to dhcp-range
* and a lot more ... checke the CHANGELOG in the package
* 2.53
-------------------------------------------------------------------
Mon Jan 25 09:31:02 CET 2010 - ug@suse.de
* adds support for RFC 3925 vendor identifying vendor
options.
* has some minor enhancements to the PXE subsystem and external
hooks for tracking DHCP leases.
* 2.52
-------------------------------------------------------------------
Fri Nov 20 16:07:32 CET 2009 - ug@suse.de
* Add support for internationalised DNS.
* Add two more environment variables for lease-change scripts:
First, DNSMASQ_SUPPLIED_HOSTNAME; this is set to the hostname
supplied by a client, even if the actual hostname used is
over-ridden by dhcp-host or dhcp-ignore-names directives.
Also DNSMASQ_RELAY_ADDRESS which gives the address of
a DHCP relay, if used.
* Fix regression which broke echo of relay-agent
options. Thanks to Michael Rack for spotting this.
* Don't treat option 67 as being interchangeable with
dhcp-boot parameters if it's specified as
dhcp-option-force.
* Make the code to call scripts on lease-change compile-time
optional. It can be switched off by editing src/config.h
or building with "make COPTS=-DNO_SCRIPT".
* Make the TFTP server cope with filenames from Windows/DOS
which use '\' as pathname separator. Thanks to Ralf for
the patch.
* Warn if an IP address is duplicated in /etc/ethers.
* Teach --conf-dir to take an option list of file suffices
which will be ignored when scanning the directory. Useful
for backup files etc. Thanks to Helmut Hullen for the
suggestion.
* Add new DHCP option named tftpserver-address
* Don't do any PXE processing, even for clients with the
correct vendorclass, unless at least one pxe-prompt or
pxe-service option is given.
* Limit the blocksize used for TFTP transfers to a value
which avoids packet fragmentation, based on the MTU of the
local interface. Many netboot ROMs can't cope with
fragmented packets.
* Honour dhcp-ignore configuration for PXE and proxy-PXE
requests.
* 2.51
-------------------------------------------------------------------
Tue Nov 3 19:09:13 UTC 2009 - coolo@novell.com
- updated patches to apply with fuzz=0
-------------------------------------------------------------------
Tue Sep 1 10:30:14 CEST 2009 - ug@suse.de
- Fix security problem which allowed any host permitted to
do TFTP to possibly compromise dnsmasq by remote buffer
overflow when TFTP enabled.
- version 2.50
-------------------------------------------------------------------
Tue Jun 16 10:57:25 CEST 2009 - ug@suse.de
- Fix regression in 2.48 which disables the lease-change
script
- version 2.49
-------------------------------------------------------------------
Fri Jun 5 10:29:10 CEST 2009 - ug@suse.de
-Fixed bug which broke binding of servers to physical
interfaces when interface names were longer than four
characters.
- Fixed netlink code
- Don't read included configuration files more than once
- Mark log messages from the various subsystems in dnsmasq
- Fix possible infinite DHCP protocol loop when an IP
address nailed to a hostname
- Allow --addn-hosts to take a directory
- Support --bridge-interface on all platforms
- Added support for advanced PXE functions
- Improvements to DHCP logging
- Added --test command-line switch
- version 2.48
-------------------------------------------------------------------
Mon Mar 16 09:57:55 CET 2009 - ug@suse.de
- dbus documentation added
-------------------------------------------------------------------
Tue Mar 10 16:24:17 CET 2009 - ug@suse.de
- Enable dbus support by jnelson
-------------------------------------------------------------------
Fri Feb 6 10:09:35 CET 2009 - ug@suse.de
- Handle duplicate address detection on IPv6 more
intelligently
- Add DBus introspection
- Update Dbus configuration file
- Support arbitrarily encapsulated DHCP options
- dhcp-option = encap:175, 190, "iscsi-client0"
- dhcp-option = encap:175, 191, "iscsi-client0-secret"
- Enhance --dhcp-match to allow testing of the contents of a
client-sent option, as well as its presence
- No longer complain about blank lines in
/etc/ethers
- Fix binding of servers to physical devices
- Reply to DHCPINFORM requests even when the supplied ciaddr
doesn't fall in any dhcp-range
- Allow the source address of an alias to be a range
- version 2.47
-------------------------------------------------------------------
Tue Nov 11 13:57:17 CET 2008 - kukuk@suse.de
- Add /usr/sbin/useradd to PreReq
-------------------------------------------------------------------
Sat Sep 13 00:51:49 CEST 2008 - mrueckert@suse.de
- fix manpage.diff to actually apply
- mark files below /etc as config
- do not install README.SUSE in %install as %doc will clean the
directory anyway.
-------------------------------------------------------------------
Fri Sep 12 15:10:55 CEST 2008 - ug@suse.de
- user dnsmasq moved to group nogroup (bnc#401648)
- added README.SUSE
- added warning to init script when /etc/ppp is in use
since it's not readable anymore
-------------------------------------------------------------------
Tue Aug 19 10:41:48 CEST 2008 - ug@suse.de
- init script fixed
-------------------------------------------------------------------
Mon Aug 11 16:32:03 CEST 2008 - ug@suse.de
- Fix crash when unknown client attempts to renew a DHCP
lease, problem introduced in version 2.43. Thanks to
Carlos Carvalho for help chasing this down.
- Fix potential crash when a host which doesn't have a lease
does DHCPINFORM. Again introduced in 2.43. This bug has
never been reported in the wild.
- Fix crash in netlink code introduced in 2.43. Thanks to
Jean Wolter for finding this.
- Change implementation of min_port to work even if min-port
as large.
- 2.4.45
-------------------------------------------------------------------
Mon Jul 14 09:45:15 CEST 2008 - ug@suse.de
- This release fixes the DNS spoofing vulnerabilities announced in
CERT VU#800113. It adds source port randomization for communication with
upstream nameservers and replaces the C library PRNG with stronger code. It
makes failure to drop root privileges a hard error (previous versions would
log the error and continue, running as root.) Other changes include an
update to avoid triggering Linux kernel messages about an out-of-date
capabilities ABI, support for NAPTR records, and RFC 5107
server-id-override.
- 2.43
-------------------------------------------------------------------
Thu Jun 19 16:42:54 CEST 2008 - ug@suse.de
- running as user dnsmasq now (bnc#401643)
-------------------------------------------------------------------
Thu Jun 5 15:33:40 CEST 2008 - ug@suse.de
* Add --dhcp-alternate-port option. Thanks to Jan Psota for
the suggestion.
* Updated Polish translations - thank to Jan Psota.
* Provide --dhcp-bridge on all BSD variants.
* Define _LARGEFILE_SOURCE which removes an arbitrary 2GB
limit on logfiles. Thanks to Paul Chambers for spotting
the problem.
* Fix RFC3046 agent-id echo code, broken for many
releases. Thanks to Jeremy Laine for spotting the problem
and providing a patch.
* Add --dhcp-scriptuser option.
* Support new capability interface on suitable Linux
kernels, removes "legacy support in use" messages. Thanks
to Jorge Bastos for pointing this out.
* Fix subtle bug in cache code which could cause dnsmasq to
lock spinning CPU in rare circumstances. Thanks to Alex
Chekholko for bug reports and help debugging.
* Support netascii transfer mode for TFTP.
- 2.42
-------------------------------------------------------------------
Wed Feb 13 09:54:14 CET 2008 - ug@suse.de
- Allow the DNS function to be completely disabled, by
setting the port to zero "--port=0"
- Fix a bug where NXDOMAIN could be returned for a query
even if the name's value was known for a different query
type.
- Fixed possible crash bug in DBus IPv6 code
- Add --dhcp-no-override option
- Add --tftp-port-range option
- Add --stop-dns-rebind option
- Added --all-servers option
- Add --dhcp-optsfile option
- Fixed broken --alias functionality
- Add --dhcp-match flag
- Added --dhcp-broadcast, to force broadcast replies
- multiple bugs fixed
- 2.41
-------------------------------------------------------------------
Fri Jan 4 06:32:08 CET 2008 - crrodriguez@suse.de
- bzip tarball
- use find_lang macro.
-------------------------------------------------------------------
Thu Dec 6 17:21:05 CET 2007 - ug@suse.de
- version 2.40
- Fix handling of fully-qualified names in --dhcp-host
- Fixed error in manpage
- Fixed misaligned memory access which caused problems on
Blackfin CPUs
- lots of new options (see changelog for details)
-------------------------------------------------------------------
Wed May 2 10:17:37 CEST 2007 - ug@suse.de
- version 2.39
- names like "localhost." in /etc/hosts with trailing period
are treated as fully-qualified.
- Tolerate and ignore spaces around commas in the
configuration file in all circumstances
- /a is no longer a valid escape in quoted strings.
- Added symbolic DHCP option names
- Overhauled the log code
- --log-facility can now take a file-name
- Added --log-dhcp flag
- Added 127.0.0.0/8 and 169.254.0.0/16 to the address
ranges affected by --bogus-priv
- Fixed failure of TFTP server with --listen-address
- Added --dhcp-circuitid and --dhcp-remoteid for RFC3046
- Added --dhcp-subscrid for RFC3993 subscriber-id relay
- Corrected garbage-collection
- Allow absolute paths for TFTP transfers even when
--tftp-root is set, as long as the path matches the root
- Updated translations
- Added --interface-name option
-------------------------------------------------------------------
Thu Mar 15 16:00:11 CET 2007 - ug@suse.de
- SuSEFirewall service files fixed and enhanced
-------------------------------------------------------------------
Tue Mar 6 11:55:37 CET 2007 - ug@suse.de
- SuSEFirewall service file added
-------------------------------------------------------------------
Tue Feb 13 09:33:37 CET 2007 - ug@suse.de
- version 2.38
Don't send length zero DHCP option 43 and cope with
encapsulated options whose total length exceeds 255 octets
by splitting them into multiple option 43 pieces.
Avoid queries being retried forever when --strict-order is
set and an upstream server returns a SERVFAIL
error. Thanks to Johannes Stezenbach for spotting this.
Fix BOOTP support, broken in version 2.37.
Add example dhcp-options for Etherboot.
Add \e (for ASCII ESCape) to the set of valid escapes
in config-file strings.
Added --dhcp-option-force flag and examples in the
configuration file which use this to control PXELinux.
Added --tftp-no-blocksize option.
Set netid tag "bootp" when BOOTP (rather than DHCP) is in
use. This makes it easy to customise which options are
sent to BOOTP clients. (BOOTP allows only 64 octets for
options, so it can be necessary to trim things.)
Fix rare hang in cache code, a 2.37 regression. This
probably needs an infinite DHCP lease and some bad luck to
trigger. Thanks to Detlef Reichelt for bug reports and
testing.
-------------------------------------------------------------------
Mon Feb 5 16:29:39 CET 2007 - ug@suse.de
Add better support for RFC-2855 DHCP-over-firewire and RFC
-4390 DHCP-over-InfiniBand. A good suggestion from Karl Svec.
Some efficiency tweaks to the cache code for very large
/etc/hosts files. Should improve reverse (address->name)
lookups and garbage collection. Thanks to Jan 'RedBully'
Seiffert for input on this.
Fix regression in 2.36 which made bogus-nxdomain
and DNS caching unreliable. Thanks to Dennis DeDonatis
and Jan Seiffert for bug reports.
Make DHCP encapsulated vendor-class options sane. Be
warned that some conceivable existing configurations
using these may break, but they work in a much
simpler and more logical way now. Prepending
"vendor:<client-id>" to an option encapsulates it
in option 43, and the option is sent only if the
client-supplied vendor-class substring-matches with
the given client-id. Thanks to Dennis DeDonatis for
help with this.
Apply patch from Jan Seiffert to tidy up tftp.c
Add support for overloading the filename and servername
fields in DHCP packet. This gives extra option-space when
these fields are not being used or with a modern client
which supports moving them into options.
Added a LIMITS section to the man-page, with guidance on
maximum numbers of clients, file sizes and tuning.
- version 2.37
-------------------------------------------------------------------
Mon Jan 22 15:20:06 CET 2007 - ug@suse.de
- version 2.36
-------------------------------------------------------------------
Mon Oct 30 09:28:53 CET 2006 - ug@suse.de
- version 2.35
- better performance on parsing huge /etc/hosts files
-------------------------------------------------------------------
Tue Oct 17 09:14:10 CEST 2006 - ug@suse.de
- version 2.34
- Tweak network-determination code
- Improve handling of high DNS loads
- Fixed intermittent infinite loop when re-reading
/etc/ethers after SIGHUP
- Provide extra information to the lease-change script
- Run the lease change script as root
- Add contrib/port-forward/* which is a script to set up
port-forwards using the DHCP lease-change script
- Fix unaligned access problem
- Fixed problem with DHCPRELEASE
- Updated French translation
- Upgraded the name hash function in the DNS cache
- Added --clear-on-reload flag
- Treat a nameserver address of 0.0.0.0 as "nothing"
- Added Webmin module in contrib/webmin
-------------------------------------------------------------------
Fri Aug 11 10:17:41 CEST 2006 - ug@suse.de
- init-script more LSB conform
patch by Matthias Andree
-------------------------------------------------------------------
Mon Aug 7 09:10:16 CEST 2006 - ug@suse.de
- version 2.33
- Provide extra information to lease-change script
- Fix breakage with some DHCP relay implementations
- compilation warning fixes
- minor DNS and DHCP fixes and enhancements
-------------------------------------------------------------------
Mon Jun 12 13:49:39 CEST 2006 - ug@suse.de
- version 2.32
-------------------------------------------------------------------
Wed May 17 13:51:37 CEST 2006 - ug@suse.de
- version 2.31
-------------------------------------------------------------------
Wed Jan 25 21:35:31 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Mon Jan 23 14:45:47 CET 2006 - ug@suse.de
- Fixed crash when attempting to send a DHCP NAK to a host
which believes it has a lease on an unknown network.
That bug was invented in 2.25
- version 2.26
-------------------------------------------------------------------
Mon Jan 16 12:29:50 CET 2006 - ug@suse.de
- moved dnsmasq.no to dnsmasq.np
see bug #42748
-------------------------------------------------------------------
Mon Jan 16 10:15:13 CET 2006 - ug@suse.de
- version update to 2.25
-------------------------------------------------------------------
Mon Nov 28 11:57:20 CET 2005 - ug@suse.de
- version update to 2.24
-------------------------------------------------------------------
Mon Oct 17 14:41:02 CEST 2005 - ug@suse.de
- "-fno-strict-aliasing" now
-------------------------------------------------------------------
Wed Oct 12 17:02:29 CEST 2005 - ug@suse.de
- version update to 2.23
-------------------------------------------------------------------
Wed Aug 24 10:26:55 CEST 2005 - ug@suse.de
- Fix DNS query forwarding for empty queries and forward
queries even when the recursion-desired bit is clear.
This allows "dig +trace" to work
Bug #106717
-------------------------------------------------------------------
Fri Aug 5 10:38:00 CEST 2005 - cthiel@suse.de
- update to version 2.22
-------------------------------------------------------------------
Wed Apr 13 14:04:44 CEST 2005 - mls@suse.de
- fix slp registration
-------------------------------------------------------------------
Mon Jan 24 10:56:13 CET 2005 - ug@suse.de
- version update from 2.19 to 2.20
- Allow more than one instance of dnsmasq to run on a
machine, each providing DHCP service on a different
interface
- Protect against overlong names and overlong
labels in configuration and from DHCP.
- Fix interesting corner case in CNAME handling. This occurs
when a CNAME has a target which "shadowed" by a name in
/etc/hosts or from DHCP
- Added support for SRV records
- Fixed sign confusion in the vendor-id matching code
- Added the ability to match the netid tag in a
dhcp-range
- Added preference values for MX records
- Added the --localise-queries option.
-------------------------------------------------------------------
Fri Jan 21 10:33:00 CET 2005 - ug@suse.de
- version update to 2.19
- minor fixes in IPV6 and DHCP Code
-------------------------------------------------------------------
Fri Nov 26 13:53:00 CET 2004 - ug@suse.de
- version update to 2.18
- lots of DHCP fixes
- some IPV6 fixes
-------------------------------------------------------------------
Fri Nov 19 15:50:11 CET 2004 - ug@suse.de
- SLP support via /etc/slp.reg.d/dnsmasq.reg file added
-------------------------------------------------------------------
Fri Aug 20 10:52:05 CEST 2004 - ug@suse.de
- version update from 2.11 to 2.13
- Added extra checks to ensure that DHCP created DNS entries
cannot generate multiple DNS address->name entries.
- Don't set the the filterwin2k option in the example config
file and add warnings that is breaks Kerberos.
- Log types of incoming queries as well as source and domain.
- Log NODATA replies generated as a result of the filterwin2k
option.
-------------------------------------------------------------------
Mon Aug 9 12:12:24 CEST 2004 - ug@suse.de
- version update from 2.8 to 2.11
-------------------------------------------------------------------
Tue Jun 1 17:09:51 CEST 2004 - ug@suse.de
- chgrp to "dialout" and not to "dip"
- backward compatibility turned off
-------------------------------------------------------------------
Mon May 24 17:28:52 CEST 2004 - ug@suse.de
- added to distribution