-------------------------------------------------------------------
Thu Nov 28 16:53:42 UTC 2024 - jbohac@suse.com

- Update to version 4.4:
  * Version 4.4
  * ts2phc: check is_running in ts2phc_pps_sink_poll()
  * ts2phc: check for errors on polling the sink devices
  * timemaster: Wait for udev to set up vclock devices.
  * ts2phc: Fix description of holdover option in man page.
  * ts2phc: Describe servo options in man page.
  * nmea: Fix tm_isdst uninitialized
  * Complete SNMP cleanup.
  * Add permanent subscription option
  * rtnl: check if the kernel provides if_team
  * port: Drop received 802.1AS packets with invalid transportSpecific values
  * ts2phc: Fix timestamp conversion for leap seconds.
  * nmea: Fix conversion of leap second.
  * ts2phc: Reset parser after RMC message.
  * Drop example snmpd.conf.
  * ts2phc: Add option to correct for NMEA delay.
  * ts2phc: Allow longer NMEA delays.
  * ts2phc: Move upper/lower rejection limit calculation.
  * ts2phc: Fix edge rejection for pulse widths over 0.5s.
  * ts2phc: Provide source type.
  * Filter any PTP frames with the source MAC of the local interface
  * ts2phc: Add holdover support.
  * ts2phc: Avoid unnecessary call of getppstime().
  * Version 4.3
  * ts2phc: Use CLOCK_MONOTONIC_RAW for NMEA PPS timestamp.
  * nsm: add authentication tlv for nsm
  * pmc: add authentication tlv for pmc
  * msg: add authentication tlv in management handling
  * sad: introduce sad_update_auth_tlv()
  * man: add man/README updates for authentication tlv
  * sad: introduce sad_append_auth_tlv() and sad_generate_icv()
  * sad: introduce sad_set_last_seqid() and sad_check_seqid()
  * port: add security processing to bc_event()
  * sad: introduce sad_process_auth() and sad_check_auth_tlv()
  * sad: introduce openssl mac library
  * sad: introduce gnupg mac library
  * sad: introduce gnutls mac library
  * sad: introduce nettle mac library
  * sad: introduce security association database
  * tlv: add authentication tlv
  * udp+udp6: Make IP addresses configurable.
  * Add support for '-l' option to tz2alt.c as documented in its man page.
  * Clean up compiler warnings about print_level.
  * Clean up compiler warning in ts2phc_pps_sink.c.
  * Clean up compiler warning in ts2phc.c.
  * Clean up compiler warning in port.c.
  * README: update mailing list.
  * ts2phc: interact with new kernel timestamp channel masks
  * lstab: Update Leap Second table validity
  * Fix indentation in example configs.
  * Document allowedLostResponses option.
  * config: Allow port sections with longer names.
  * sk: Fix descriptor leak in sk_get_if_info().
  * lstab: Don't free lstab on update.
  * lstab: Limit number of parsed leap seconds.
  * uds: Warn if replacing existing socket.
  * Add example Common Mean Link Delay Service configuration files.
  * Implement the COMMON_P2P delay mechanism.
  * Add a push notification for the CMLDS TLV.
  * Introduce the Common Mean Link Delay Information TLV.
  * pmc: Make SET SUBSCRIBE_EVENTS_NP forwards compatible.
  * pmc/uds: Configure the remote server address using the interface API.
  * interface: Add an optional remote address for use by the UDS transport.
  * ts2phc: Don't switch system clock to nanosecond mode.
  * Version 4.2
  * phc_ctl: Use util.h NSEC_PER_SEC macro instead of local macro
  * servo: Use util.h NSEC_PER_SEC macro instead of local macro
  * port: Use util.h NSEC_PER_SEC macro instead of local macro
  * util: Introduce NSEC_PER_SEC macro
  * port: Fix multiple pdelay response handling
  * Make allowedLostResponses configurable
  * ptp4l: Allow advertisement of legacy PTP 2.0 protocol
  * msg: Enable changing PTP message header version
  * linuxptp: Use ${CC} in incdefs.sh
  * include string.h for strncpy()
  * lstab: Update leapfile validity
  * print: Support log level in message tag.
  * phc2sys: Stop synchronization when ptp4l stops responding.
  * phc2sys: Better indicate domain with realtime clock.
  * pmc_agent: Make update interval configurable.
  * pmc_agent: Add function to check if still subscribed.
  * port: set_tmo_log() timer interval calculation fix
  * Add notification for changes in PARENT_DATA_SET.
  * clock: Downgrade log message about failed uds forward.
  * Avoid conflicting port IDs over PMC UDS
  * phc_ctl: Use pr_notice instead of pr_err for displaying adjusted frequency
  * phc_ctl: Add maximum offset capability
  * phc_ctl: Add phase command to support ADJ_OFFSET

-------------------------------------------------------------------
Tue Sep 12 08:29:58 UTC 2023 - jbohac@suse.com

- Update to version 4.1:
  * Version 4.1
  * phc2sys: Fix -n option with -w.
  * phc2sys: Avoid segfault with default UDS address.
  * phc2sys: Improve logging with single domain.
  * ptp4l man: Add description for setting kthreads priorities
  * sk: don't report random errno on timeout
  * phc_ctl: explicitly check for adjust_phase definition
  * raw: Fix PRP trailer detection
  * remove C99 style loop variable declarations
  * phc2sys: Add multi-domain synchronization.
  * phc2sys: Shallow do_loop().
  * phc2sys: Create pmc agent after processing options.
  * phc2sys: Rename phc2sys_private to domain.
  * Use the 802.1AS peer delay computation when transportSpecific is 1
  * Resolve false hybrid_e2e warning
  * Fix SERVO_LOCKED_STABLE behavior.
  * Version 4.0
  * clock: Fix summary interval in free-running mode.
  * Avoid switching PHC when phc_index is negative
  * ts2phc: Fix memory leak on initial error path.
  * power profile: Fix regression in the default configuration file.
  * msg: append TLV onto all PTP event messages
  * Fix detection of VLAN over bond support in case the driver does not support SIOCGHWTSTAMP ioctl.
  * Clear pending errors on sockets.
  * ntpshm: Invalidate SHM data before releasing the servo
  * lstab: Update leapfile validity
  * port: Don't switch to PHC with SW timestamping.
  * ts2phc: Fix potential null-pointer dereference
  * ts2phc: Prevent reporting poll error when received termination signal
  * Set controlField to zero in message headers
  * tz2alt: Add tz2alt to .gitignore
  * Introduce a time zone helper program.
  * pmc: Convert internal helper function into global method.
  * Implement the ALTERNATE_TIME_OFFSET_ENABLE management message.
  * Add the ALTERNATE_TIME_OFFSET_NAME management message.
  * Add the ALTERNATE_TIME_OFFSET_PROPERTIES management message.
  * Prepare clock based storage of up to four time zones.
  * tlv: Encode and decode alternate time offset indicator TLVs.
  * Add a custom management message for power profile settings.
  * Introduce the power profile.
  * tlv: Encode and decode power profile TLVs.
  * Accept the full range for domainNumber.
  * man pages: Bump date.
  * Alphabetize configuration options in the ts2phc man page.
  * Alphabetize configuration options in the pmc man page.
  * Alphabetize configuration options in the phc2sys man page.
  * Remove stray copy/pasteo from the phc2sys man page.
  * Alphabetize configuration options in the ptp4l man page.
  * ts2phc: reset servo if failed to discipline clock
  * phc2sys: reset servo if failed to discipline clock
  * ptp4l: reset servo if failed to discipline clock
  * clockadj: return error if failed to adjust clock
  * unicast: Avoid undefined integer shifts.
  * ts2phc: Fix generic pps source when tai offset is not set in OS
  * lstab: move update_leapsecond_table function to lstab
  * lstab: Add LSTAB_EXPIRED result
  * timemaster: Use refclock_sock servo with chrony.
  * timemaster: Replace shm_segment with refclock_id.
  * Add refclock_sock servo.
  * Remove obsolete statement in ptp4l man page.
  * Fix up alphetical order in port_private header file.
  * port: start sync rx timer on grant
  * raw: Use BPF filter based on tcpdump syntax.
  * Fix SERVO_JUMP docstring comment
  * Improve efficiency of nullf servo synchronization
  * clock: Fix stale clock parent pid usage after best master change
  * adding delay asymmetry calculation
  * organization TLV support for interface rate
  * adding speed field information for interface
  * function to support get interface speed via ethtool
  * unicast_client: cancel sync/delay_response on UC_EV_UNSELECTED event
  * unicast_client: fix checkpatch ERROR: trailing whitespace
  * unicast_client: stop sending abnormal contract cancel requests
  * Don't re-arm fault clearing timer on unrelated netlink events
  * port: Avoid faults with vclocks and PHC from command line.
  * makefile: use conditional assignment for KBUILD_OUTPUT
  * servo: stop rounding initial frequency to nearest ppb
  * The PortId is defined as a couple of ClockId (an 8-bytes opaque) and the PortNumber (UInterger16).
  * config: Fix -Wformat-truncation warnings.
  * unciast_client: trigger BMCA upon CANCEL receive
  * ptp4l: Add profile_id configuration support for G.8275.1 and G.8275.2.
  * config: allow fractional freq_est_interval
  * Added support for Standard Baudrates supported by GNSS receivers
  * Extend clockcheck to check for changes in frequency.
  * Don't accept errors in clockadj_get_freq().
  * Drop support for old kernels returning zero frequency.
  * phc2sys: Add clocks after processing configuration.
  * ts2phc: Use system time as the default ToD source
  * ts2phc: Add option to specify the ToD source in the config file
  * ts2phc: Rename pps_sink to tod_sink in main()
  * port: don't clear fault if link is down
  * sk: Handle EINTR when waiting for transmit timestamp.
  * ts2phc: Update default lstab expiry date
  * phc2sys: Update TAI to UTC offset in manual
  * Strip Parallel Redundancy Protocol (PRP) trailer
  * ts2phc_phc_pps_source: make use of new kernel API for perout waveform
  * ts2phc: allow PHC PPS sources to be synchronized
  * ts2phc: reconfigure sync direction by subscribing to ptp4l port events
  * ts2phc: split PPS sink poll from servo loop
  * ts2phc_slave: print offset to the source clock
  * ts2phc: instantiate a pmc agent
  * util: import port_state_normalize() logic from phc2sys
  * ts2phc: instantiate a full clock structure for every PPS source of the PHC kind
  * ts2phc: instantiate a full clock structure for every PPS sink
  * ts2phc: create a private data structure
  * phc2sys: Add support for free-running mode
  * G.8275.2 support for delay_mechanism NO_MECHANISM
  * port: Disable PHC switch with vclocks.
  * unicast: Update announce timer when renew
  * phc2sys: Allow multiple sink clocks
  * Add new ptp capability.
  * Add new management TLVs to pmc.8
  * ptp4l: add VLAN over bond support
  * port: refactor port_link_status
  * ptp4l: init iface->ts_label when interface created
  * phc2sys: Don't exit when reading of PHC fails with EBUSY.
  * sysoff: Retry on EBUSY when probing supported ioctls.
  * sysoff: Change log level of ioctl error messages.
  * sysoff: Change sysoff_measure() to return errno.
  * clockadj: Change clockadj_compare() to return errno.
  * ts2phc: rename "master" to "source"
  * ts2phc: rename "slave clocks" to "PPS sinks"
  * ts2phc: rename source code files ("master" to "source", "slave" to "sink")
  * pmc_agent: make pmc_agent_query_port_properties take an enum port_state argument
  * UDS: allow specifying different file mode for the read-only socket.
  * UDS: added option to set file mode for the created socket.
  * Fix management TLV print.
  * Add new managements TLVs get size.
  * port: cancel unicast transmission when closing port.
  * port: unicast client - do not add master to foreign master table if not in the unicast master table.
  * unicast: Add support to send CANCEL_UNICAST_TRANSMISSION TLVs.
  * unicast: Add support to check if message was received from an entry in the unicast master table.
  * TLV management messages need to be aligned to 16 bits.
  * Fix the descriptions of "G.8275.portDS.localPriority" and "G.8275.defaultDS.localPriority" in ptp4l man page.
  * timemaster: Add support for virtual clocks.
  * phc2sys: Use PHC index from PORT_HWCLOCK_NP.
  * tlv: Add PORT_HWCLOCK_NP.
  * port: Check for virtual clocks.
  * config: Add port-specific phc_index option.
  * Add support for binding sockets to virtual clocks.
  * rtnl: Add function to detect virtual clocks.
  * rtnl: Fix rtnl_rtattr_parse() to process max attribute.
  * phc_ctl: replace calculate_offset with clockadj_compare
  * phc2sys: move read_phc into clock_adj.c
  * Add UNICAST_MASTER_TABLE_NP management TLV
  * pmc: Initialize reserved field in management_tlv_datum.
  * Check 'print_log' before arguments are evaluated, not after.
  * Add PORT_SERVICE_STATS_NP management TLV
  * util: attempt to resolve symlinks to the PHC device in posix_clock_open
  * util: fix dangling file descriptors on the error path of posix_clock_open
  * Maintain one Sync sequence counter per destination address.
  * Maintain one Announce sequence counter per destination address.
  * clock: Split update of leap status from clock_time_properties().
  * Delay Response Timeout Feature addition for PTP4L
  * clock: Notify servo about leap second on UTC hardware clock.
  * clock: Clear leap flags after leap second.
  * clock: Print info message when leap flags change.
  * clock: Accept new UTC offset after leap second.
  * lstab: update expiration to 28 December 2021
  * lstab: Close file after reading.
  * Fix quoting in ptp4l man page.
  * config: Add workaround for glibc getopt_long().
  * Rename management ID macros.
  * clockcheck: Increase minimum interval.
  * port: Don't renew raw transport.
  * port: Don't check timestamps from non-slave ports.
  * clock: Reset clock check on best clock/port change.
  * clock: Reset state when switching port with same best clock.
  * Increase the default tx_timestamp_timeout to 10
  * ts2phc: Add serial baudrate option
  * ts2phc: Update leapfile documentation
  * ts2phc: Close socket on peer shutdown
  * ts2phc: Fix uninitialized variable in nmea_scan_rmc
  * tc: Fix length of follow-up message of one-step sync.
  * Validate the messageLength field of incoming messages.
  * Log optimization for ptp4l in jbod and client only mode (clientOnly=1 and boundary_clock_jbod=1)
  * Log optimization for ptp4l in jbod and client only mode (clientOnly=1 and boundary_clock_jbod=1)
  * Add master only management TLV
  * Set domainNumber for telecom examples
  * Fix SLAVE_ONLY TLV
  * Prevent client ports getting stuck in the UNCALIBRATED state.
  * tlv: Fix coding style.
  * Ensure TLV_PORT_STATS_NP statistics uses little endian.
  * Revert "phc2sys: Expand the validation of the PPS mode."
  * Avoid undefined integer operations.
  * pmc: Fix printed totalCorrectionField.
  * Avoid unaligned pointers to packed members.
  * Revert "phc2sys: Ensure PHC source when using PPS mode."
  * phc_ctl: Fix incorrect memset in do_cmp()
  * Fix --initial_delay for automotive profile
  * Update man page to reflect the new serverOnly option.
  * Convert the example configuration files over to the new serverOnly option.
  * Deprecate the masterOnly option in favor of serverOnly.
  * Bump to IEEE 1588-2019 version
  * Clock Class Threshold Feature addition for PTP4L
  * sk: Don't return error for zero-length messages.
  * clock: Introduce step_window to free run x Sync events after a clock step.
  * timemaster: Set uds_ro_address for ptp4l instances.
  * clock: Add read-only UDS port for monitoring.
  * clock: Rename UDS variables to read-write.
  * clock: Don't allow COMMAND action on non-UDS port.
  * port: Ignore non-management messages on UDS port.
  * port: Don't assume transport from port number.
  * Implement push notification for TIME_STATUS_NP
  * tlv: Fix byte reordering in ScaledNs
  * Improve port-related log messages.
  * port: Cache display name for logs.
  * Update man pages to reflect the new clientOnly option.
  * Convert the example configuration files over to the new clientOnly option.
  * Deprecate the slaveOnly option in favor of clientOnly.
  * Check for deprecated "long" options on the command line.
  * lstab: Bring expiration up to date.
  * util: add SIGHUP handling
  * port: Fix link down/up to continue using phc_index set from command line -p option.
  * ts2phc: Convert usage message to time source/sink terminology.
  * ptp4l: Convert usage messages to client/server terminology.
  * phc2sys: Convert usage messages to time source/sink terminology.
  * ts2phc: Convert man page to source/sink terminology.
  * ptp4l: Convert man page to client/server terminology.
  * phc2sys: Convert man page to client/server terminology.
  * phc2sys: Convert man page to source/sink terminology.
  * phc2sys: Update man page to reflect the new restriction on the PPS mode.
  * phc2sys: Ensure PHC source when using PPS mode.
  * phc2sys: fix BC sync fault when port in uncalibrated state
  * phc2sys: add dbg print for clock state change events
  * Update the unicast subscriptions when the GM changes.
  * phc2sys: Fix regression in the automatic mode.
  * pmc_agent: Remove an obsolete method.
  * phc2sys: Simplify the main loop.
  * pmc_agent: Let the update method poll for push events.
  * phc2sys: Move static configuration to its own subroutine.
  * phc2sys: Replace yet another magical test with a proper test.
  * phc2sys: Replace magical test with a proper test.
  * phc2sys: Expand the validation of the PPS mode.
  * phc2sys: Validate the PPS mode right away.
  * phc2sys: Replace hard coded tests with a readable helper function.
  * phc2sys: Rename PMC agent pointer from node to agent.
  * phc2sys: Don't duplicate the command line arguments.
  * pmc_agent: Simplify the method that gets of the number of local ports.
  * pmc_agent: Generalize the method that queries the local clock identity.
  * pmc_agent: Convert the method that queries the port properties.
  * pmc_agent: Convert the method that queries TAI-UTC offset into the canonical form.
  * phc2sys: Fix null pointer de-reference in manual mode.
  * rtnl: Fix trivial spelling error in the name of a helper function.
  * Update the description of the time_stamping configuration option.
  * Avoid setting clock frequency when free running.
  * pmc_agent: Rename the update method and attempt to document it.
  * pmc_agent: Perform time comparison using positive logic.
  * pmc_agent: Remove bogus comparison between last update and now.
  * pmc_agent: Simplify logic in update method.
  * pmc_agent: Simplify the update method.
  * pmc_agent: Convert the subscribe method into the canonical form.
  * Introduce error codes for the run_pmc method.
  * Clarify the documentation of the management TLV ID helper function.
  * Find a better home for the management TLV data helper function.
  * Find a better home for the management TLV ID helper function.
  * pmc_agent: Hide the implementation.
  * pmc_agent: Rename pmc_node to something more descriptive.
  * Introduce the PMC agent module.
  * phc2sys: break out pmc code into pmc_common.c
  * phc2sys: make PMC functions non-static
  * phc2sys: extract PMC functionality into a smaller struct pmc_node
  * phc2sys: break long lines in the PTP management message accessors
  * phc2sys: Postpone adding of servo to clock.
  * phc2sys: Remove superfluous code.
  * missing.h: uclic-ng has clock_nanosleep support since v1.0.31

-------------------------------------------------------------------
Tue Oct  5 11:41:43 UTC 2021 - Johannes Segitz <jsegitz@suse.com>

- Added hardening to systemd service(s) (bsc#1181400). Modified:
  * phc2sys.service
  * ptp4l.service

-------------------------------------------------------------------
Tue Jul 06 08:06:16 UTC 2021 - jbohac@suse.com

- Update to version 3.1.1:
  * Version 3.1.1
  * tc: Fix length of follow-up message of one-step sync.
  * Validate the messageLength field of incoming messages.

-------------------------------------------------------------------
Tue Nov 10 21:35:12 UTC 2020 - jbohac@suse.com

- Update to version 3.1:
  * ts2phc: nmea: Drop time of day readings older than five seconds.
  * ts2phc: nmea: Update the leap seconds table on demand.
  * ts2phc: nmea: Add a configuration option for the current leap seconds file.
  * ts2phc: nmea: Add error messages for leap second lookup failures.
  * ts2phc: nmea: Correct UTC to TAI conversion.
  * posix_clock_open: derive PHC index from device name if possible
  * phc_ctl: display all capability information
  * ts2phc: Ignore pulses with invalid time stamps.
  * ts2phc: Fix memory leak.
  * ts2phc: Use proper close method on the error path.
  * port: Support slave event monitoring of delay timing data.
  * monitor: Add support for slave delay timing data TLV.
  * pmc: Show slave receive timing data TLVs attached to signaling messages.
  * port: Support slave event monitoring of Sync timing data.
  * clock: Create a slave event monitor.
  * Introduce a module for slave event monitoring.
  * Reject path trace TLVs with excessive elements.
  * Let the free running port state reflect the synchronization uncertain flag.
  * pmc: Support getting and setting the local synchronization uncertain flag.
  * Implement the synchronization uncertain flag.
  * Add support for write phase mode.
  * Decouple servo state from automotive profile.
  * ts2phc: Support using a GPS radio as the master clock.
  * Introduce a leap second table.
  * ts2phc: Support using a PHC as the master clock.
  * Introduce the ts2phc program.
  * pmc: Allow multiple local subscribers.
  * pmc: Subscribe to port state push notification events when requested.
  * clock: reset master/local rr when best clock id changes
  * unicast: Enable sharing master tables between ports.
  * Accept external PHC devices from the command line.
  * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock.
  * Correct the signature of the legacy system offset measurement method.
  * ptp4l: Add configuration option for socket priority
  * sk: Recognize HWTSTAMP_FILTER_SOME
  * Improve G.8275.[12] example configs.
  * rtnl: add team activebackup support
  * Ignore signaling messages on target port mismatch.
  * Avoid fault when receiving zero length packets
  * phc2sys: Fix crash when trying to synchronize unadjustable clock.
  * Added support for opening POSIX clock devices
  * Allow ignoring source port identity in end to end mode.
  * port: correction of port name used port_open
  * Add example configuration for Automotive Profile.
  * Add ignore_source_id config option.
  * Add inhibit_announce config option.
  * Add BMCA config option.
  * port: Add configurable option to set asCapable.
  * timemaster: Allow ptp4l-specific sections in [ptp4l.conf].
  * unicast: Process timeouts equal to current time.
  * snmp4lptp: added snmp4lptp.8
  * Add possibility to set clockIdentity
  * Introduce the maxStepsRemoved attribute
  * config: Add hardware time stamp filter setting mode
  * snmp4lptp: Added function for data collection from ptp4l program.
  * snmp4lptp: Added communication to ptp4l via the UDS port.
  * snmp4lptp: Add snmp sub agent for linuxptp
- re-introduce the _service file

-------------------------------------------------------------------
Wed Jul 24 12:04:35 UTC 2019 - matthias.gerstner@suse.com

- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
  firewalld, see [1].

  [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html

-------------------------------------------------------------------
Mon Nov 26 12:43:06 UTC 2018 - Martin Pluskal <mpluskal@suse.com>

- Update to stable release 2.0:
  * Peer-to-Peer Transparent Clock support
  * End-to-End Transparent Clock support
  * Unicast support
  * Support for all three Telecom Profiles
    + T-REC-G.8265.1-201407
    + T-REC-G.8275.1-201606
    + T-REC-G.8275.2-201708
- Changes for version 1.9.2:
  * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9)
  * Command line support for every configuration variable via long options
  * IPoIB interface support
  * Improved Delay Request performance at high message rates
  * Improved UTC offset tracking
  * Multiple TLV support
  * NetSync Monitor protocol support
  * Peer to peer one-step
  * Support for bonded interfaces
- No longer use _service

-------------------------------------------------------------------
Tue Apr  3 12:27:38 UTC 2018 - jbohac@suse.com

Update to version 1.9+git1.gd14f11f:
  * Expand and rationalize time stamping options.
  * Introduce peer to peer one step.
  * pmc: add long options and configuration file
  * port: Implement the NetSync Monitor protocol.
  * Introduce an option to ignore the transport specific field.
  * clock: add option to specify initial path delay.
  * sk: turn warnings about unexpected RX filter into debug messages.

-------------------------------------------------------------------
Thu Feb  8 12:08:37 UTC 2018 - jbohac@suse.com

- change the versioning scheme, resulting in version
  1.8+git65.g303b08c 

-------------------------------------------------------------------
Thu Feb  8 08:51:50 UTC 2018 - mpluskal@suse.com

- Update to version v1.8+git.20180101 (bsc#1050682):
  * clock: Don't forward management requests to UDS port.
  * Add an acknowledgment in the readme for Meinberg.
  * phc2sys: update '-s' option
  * sk: don't leak socket when reading of IB GUID fails.
  * Add compile time sanity check for interface name lengths.
  * phc_ctl: fix adj command to accept negative offset.
  * port: return timestamping iface in port properties
  * phc2sys: re-create clock clkid and servo when phc index changed
  * phc2sys: split servo_add from function clock_add
  * transport: pass struct interface to transport_open

-------------------------------------------------------------------
Thu Nov 23 13:47:15 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)

-------------------------------------------------------------------
Mon Jul 10 11:45:01 UTC 2017 - jengelh@inai.de

- Remove future goals from description.

-------------------------------------------------------------------
Fri Jun 30 06:45:51 UTC 2017 - mpluskal@suse.com

- Cleanup spec file with spec-cleaner
- Use url for source
- Use kernel-devel instead full source

-------------------------------------------------------------------
Thu May 25 12:20:17 UTC 2017 - lpechacek@suse.com

- upgraded to 1.8
- new tools: timemaster, phc_ctl

-------------------------------------------------------------------
Wed Sep  3 01:41:37 CEST 2014 - ro@suse.de

- sanitize release line in specfile

-------------------------------------------------------------------
Thu Mar 27 12:16:20 UTC 2014 - lpechacek@suse.com

- updated How To to mention ethtool (bnc#865358)

-------------------------------------------------------------------
Wed Mar 26 16:51:51 CET 2014 - jbohac@suse.cz

- convert to systemd (bnc#865355)
  - two separate services (ptp4l and phc2sys) instead of linuxptp
  - two separate config files:
    /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of
    /etc/sysconfig/linuxptp

-------------------------------------------------------------------
Tue Feb 18 18:59:56 CET 2014 - jbohac@suse.cz

- upgraded to 1.4
- fixed FSF address in init file

-------------------------------------------------------------------
Fri Jul 26 10:12:08 UTC 2013 - lpechacek@suse.com

- added Linux PTP Howto

-------------------------------------------------------------------
Thu Jun  6 09:26:54 UTC 2013 - lpechacek@suse.com

- adjusted sysconfig defaults to match changes made to phc2sys
  behavior

-------------------------------------------------------------------
Wed Jun  5 16:00:18 CEST 2013 - jbohac@suse.cz

- upgraded to 1.2.git74e70372

-------------------------------------------------------------------
Tue Apr 23 16:50:16 CEST 2013 - jbohac@suse.cz

- upgraded to 1.2

-------------------------------------------------------------------
Mon Mar 25 15:44:25 UTC 2013 - lpechacek@suse.com

- reviewed by Security (bnc#809336)

-------------------------------------------------------------------
Fri Mar 15 11:23:35 UTC 2013 - cfarrell@suse.com

- license update: GPL-2.0+
  No indication of a GPL version 2 only license. Also, use SPDX format
  where possible

-------------------------------------------------------------------
Wed Mar  6 10:44:35 UTC 2013 - lpechacek@suse.com

- upgraded to 1.1

-------------------------------------------------------------------
Fri Feb 15 05:37:47 UTC 2013 - lpechacek@suse.com

- initial packaging