netcat-openbsd/build-without-TLS-support.patch

873 lines
22 KiB
Diff
Raw Normal View History

From: Guilhem Moulin <guilhem@debian.org>
Date: Fri, 09 Jun 2017 13:21:23 +0200
Subject: build without TLS support
tls.h isn't available in libsd-dev, and TLS supports adds options (-C, -Z)
that are already used by our Debian-specific patches.
---
Makefile | 2
nc.1 | 114 ++---------------------------------------
netcat.c | 172 +++++++++++++++++++++++++++++++++++++++++++++++++++++----------
3 files changed, 153 insertions(+), 135 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -2,8 +2,6 @@
PROG= nc
SRCS= netcat.c atomicio.c socks.c
-LDADD+= -ltls -lssl -lcrypto
-DPADD+= ${LIBTLS} ${LIBSSL} ${LIBCRYPTO}
LIBS= `pkg-config --libs libbsd` -lresolv
OBJS= $(SRCS:.c=.o)
--- a/nc.1
+++ b/nc.1
@@ -33,20 +33,14 @@
.Nd arbitrary TCP and UDP connections and listens
.Sh SYNOPSIS
.Nm nc
-.Op Fl 46cDdFhklNnrStUuvz
-.Op Fl C Ar certfile
-.Op Fl e Ar name
-.Op Fl H Ar hash
+.Op Fl 46DdFhklNnrStUuvz
.Op Fl I Ar length
.Op Fl i Ar interval
-.Op Fl K Ar keyfile
.Op Fl M Ar ttl
.Op Fl m Ar minttl
.Op Fl O Ar length
-.Op Fl o Ar staplefile
.Op Fl P Ar proxy_username
.Op Fl p Ar source_port
-.Op Fl R Ar CAfile
.Op Fl s Ar source
.Op Fl T Ar keyword
.Op Fl V Ar rtable
@@ -54,7 +48,6 @@
.Op Fl w Ar timeout
.Op Fl X Ar proxy_protocol
.Op Fl x Ar proxy_address Ns Op : Ns Ar port
-.Op Fl Z Ar peercertfile
.Op Ar destination
.Op Ar port
.Sh DESCRIPTION
@@ -99,28 +92,10 @@ The options are as follows:
Use IPv4 addresses only.
.It Fl 6
Use IPv6 addresses only.
-.It Fl C Ar certfile
-Load the public key part of the TLS peer certificate from
-.Ar certfile ,
-in PEM format.
-Requires
-.Fl c .
-.It Fl c
-Use TLS to connect or listen.
-Cannot be used together with any of the options
-.Fl FuU .
.It Fl D
Enable debugging on the socket.
.It Fl d
Do not attempt to read from stdin.
-.It Fl e Ar name
-Only accept the TLS peer certificate if it contains the
-.Ar name .
-Requires
-.Fl c .
-If not specified,
-.Ar destination
-is used.
.It Fl F
Pass the first connected socket using
.Xr sendmsg 2
@@ -137,18 +112,7 @@ using the
.Cm ProxyUseFdpass
option).
Cannot be used with
-.Fl c
-or
.Fl U .
-.It Fl H Ar hash
-Only accept the TLS peer certificate if its hash returned from
-.Xr tls_peer_cert_hash 3
-matches
-.Ar hash .
-Requires
-.Fl c
-and cannot be used with
-.Fl T Cm noverify .
.It Fl h
Print out the
.Nm
@@ -160,12 +124,6 @@ Sleep for
.Ar interval
seconds between lines of text sent and received.
Also causes a delay time between connections to multiple ports.
-.It Fl K Ar keyfile
-Load the TLS private key from
-.Ar keyfile ,
-in PEM format.
-Requires
-.Fl c .
.It Fl k
When a connection is completed, listen for another one.
Requires
@@ -196,15 +154,6 @@ Do not do any DNS or service lookups on
hostnames or ports.
.It Fl O Ar length
Specify the size of the TCP send buffer.
-.It Fl o Ar staplefile
-During the TLS handshake, load data to be stapled from
-.Ar staplefile ,
-which is expected to contain an OCSP response from an OCSP server in
-DER format.
-Requires
-.Fl c
-and
-.Fl C .
.It Fl P Ar proxy_username
Specifies a username to present to a proxy server that requires authentication.
If no username is specified then authentication will not be attempted.
@@ -213,13 +162,6 @@ Proxy authentication is only supported f
Specify the source port
.Nm
should use, subject to privilege restrictions and availability.
-.It Fl R Ar CAfile
-Load the root CA bundle for TLS certificate verification from
-.Ar CAfile ,
-in PEM format, instead of
-.Pa /etc/ssl/cert.pem .
-Requires
-.Fl c .
.It Fl r
Choose source and/or destination ports randomly
instead of sequentially within a range or in the order that the system
@@ -239,35 +181,7 @@ Cannot be used together with
or
.Fl x .
.It Fl T Ar keyword
-Change the IPv4 TOS/IPv6 traffic class value or the TLS options.
-.Pp
-For TLS options,
-.Ar keyword
-may be one of:
-.Cm noverify ,
-which disables certificate verification;
-.Cm noname ,
-which disables certificate name checking;
-.Cm clientcert ,
-which requires a client certificate on incoming connections; or
-.Cm muststaple ,
-which requires the peer to provide a valid stapled OCSP response
-with the handshake.
-The following TLS options specify a value in the form of a
-.Ar key Ns = Ns Ar value
-pair:
-.Cm ciphers ,
-which allows the supported TLS ciphers to be specified (see
-.Xr tls_config_set_ciphers 3
-for further details);
-.Cm protocols ,
-which allows the supported TLS protocols to be specified (see
-.Xr tls_config_parse_protocols 3
-for further details).
-Specifying TLS options requires
-.Fl c .
-.Pp
-For the IPv4 TOS/IPv6 traffic class value,
+Change the IPv4 TOS/IPv6 traffic class value.
.Ar keyword
may be one of
.Cm critical ,
@@ -291,13 +205,13 @@ to script telnet sessions.
Use
.Ux Ns -domain
sockets.
-Cannot be used together with any of the options
-.Fl cFx .
+Cannot be used together with
+.Fl F
+or
+.Fl x .
.It Fl u
Use UDP instead of TCP.
Cannot be used together with
-.Fl c
-or
.Fl x .
For
.Ux Ns -domain
@@ -360,12 +274,6 @@ An IPv6 address can be specified unambig
in square brackets.
A proxy cannot be used with any of the options
.Fl lsuU .
-.It Fl Z Ar peercertfile
-Save the peer certificates to
-.Ar peercertfile ,
-in PEM format.
-Requires
-.Fl c .
.It Fl z
Only scan for listening daemons, without sending any data to them.
Cannot be used together with
@@ -519,16 +427,6 @@ the source port, with a timeout of 5 sec
.Pp
.Dl $ nc -p 31337 -w 5 host.example.com 42
.Pp
-Open a TCP connection to port 443 of www.example.com, and negotiate TLS with
-any supported TLS protocol version and "compat" ciphers:
-.Pp
-.Dl $ nc -cv -T protocols=all -T ciphers=compat www.example.com 443
-.Pp
-Open a TCP connection to port 443 of www.google.ca, and negotiate TLS.
-Check for a different name in the certificate for validation:
-.Pp
-.Dl $ nc -cv -e adsf.au.doubleclick.net www.google.ca 443
-.Pp
Open a UDP connection to port 53 of host.example.com:
.Pp
.Dl $ nc -u host.example.com 53
--- a/netcat.c
+++ b/netcat.c
@@ -99,7 +99,9 @@
#include <stdlib.h>
#include <string.h>
#include <time.h>
-#include <tls.h>
+#ifdef TLS
+# include <tls.h>
+#endif
#include <unistd.h>
#include <bsd/stdlib.h>
#include <bsd/string.h>
@@ -115,10 +117,12 @@
#define POLL_STDOUT 3
#define BUFSIZE 16384
-#define TLS_NOVERIFY (1 << 1)
-#define TLS_NONAME (1 << 2)
-#define TLS_CCERT (1 << 3)
-#define TLS_MUSTSTAPLE (1 << 4)
+#ifdef TLS
+# define TLS_NOVERIFY (1 << 1)
+# define TLS_NONAME (1 << 2)
+# define TLS_CCERT (1 << 3)
+# define TLS_MUSTSTAPLE (1 << 4)
+#endif
/* Command Line Options */
int dflag; /* detached, no stdin */
@@ -144,6 +148,7 @@ int Sflag; /* TCP MD5 signature opti
int Tflag = -1; /* IP Type of Service */
int rtableid = -1;
+# if defined(TLS)
int usetls; /* use TLS */
const char *Cflag; /* Public cert file */
const char *Kflag; /* Private key file */
@@ -156,6 +161,7 @@ char *tls_expecthash; /* required hash
char *tls_ciphers; /* TLS ciphers */
char *tls_protocols; /* TLS protocols */
FILE *Zflag; /* file to save peer cert */
+# endif
int recvcount, recvlimit;
int timeout = -1;
@@ -170,10 +176,16 @@ int strtoport(char *portstr, int udp);
void build_ports(char *);
void help(void) __attribute__((noreturn));
int local_listen(const char *, const char *, struct addrinfo);
+# if defined(TLS)
void readwrite(int, struct tls *);
+# else
+void readwrite(int);
+# endif
void fdpass(int nfd) __attribute__((noreturn));
int remote_connect(const char *, const char *, struct addrinfo);
+# if defined(TLS)
int timeout_tls(int, struct tls *, int (*)(struct tls *));
+# endif
int timeout_connect(int, const struct sockaddr *, socklen_t);
int socks_connect(const char *, const char *, struct addrinfo,
const char *, const char *, struct addrinfo, int, const char *);
@@ -183,15 +195,24 @@ int unix_connect(char *);
int unix_listen(char *);
void set_common_sockopts(int, int);
int process_tos_opt(char *, int *);
+# if defined(TLS)
int process_tls_opt(char *, int *);
void save_peer_cert(struct tls *_tls_ctx, FILE *_fp);
+# endif
void report_sock(const char *, const struct sockaddr *, socklen_t, char *);
+# if defined(TLS)
void report_tls(struct tls *tls_ctx, char * host);
+# endif
void usage(int);
+# if defined(TLS)
ssize_t drainbuf(int, unsigned char *, size_t *, struct tls *);
ssize_t fillbuf(int, unsigned char *, size_t *, struct tls *);
void tls_setup_client(struct tls *, int, char *);
struct tls *tls_setup_server(struct tls *, int, char *);
+# else
+ssize_t drainbuf(int, unsigned char *, size_t *);
+ssize_t fillbuf(int, unsigned char *, size_t *);
+# endif
int
main(int argc, char *argv[])
@@ -206,8 +227,10 @@ main(int argc, char *argv[])
const char *errstr;
struct addrinfo proxyhints;
char unix_dg_tmp_socket_buf[UNIX_DG_TMP_SOCKET_SIZE];
+# if defined(TLS)
struct tls_config *tls_cfg = NULL;
struct tls *tls_ctx = NULL;
+# endif
uint32_t protocols;
ret = 1;
@@ -215,12 +238,18 @@ main(int argc, char *argv[])
host = NULL;
uport = NULL;
sv = NULL;
+# if defined(TLS)
Rflag = tls_default_ca_cert_file();
+# endif
signal(SIGPIPE, SIG_IGN);
while ((ch = getopt(argc, argv,
+# if defined(TLS)
"46C:cDde:FH:hI:i:K:klM:m:NnO:o:P:p:R:rSs:T:tUuV:vW:w:X:x:Z:z"))
+# else
+ "46DdFhI:i:klM:m:NnO:P:p:rSs:T:tUuV:vW:w:X:x:z"))
+# endif
!= -1) {
switch (ch) {
case '4':
@@ -242,24 +271,30 @@ main(int argc, char *argv[])
else
errx(1, "unsupported proxy protocol");
break;
+# if defined(TLS)
case 'C':
Cflag = optarg;
break;
case 'c':
usetls = 1;
break;
+# endif
case 'd':
dflag = 1;
break;
+# if defined(TLS)
case 'e':
tls_expectname = optarg;
break;
+# endif
case 'F':
Fflag = 1;
break;
+# if defined(TLS)
case 'H':
tls_expecthash = optarg;
break;
+# endif
case 'h':
help();
break;
@@ -268,9 +303,11 @@ main(int argc, char *argv[])
if (errstr)
errx(1, "interval %s: %s", errstr, optarg);
break;
+# if defined(TLS)
case 'K':
Kflag = optarg;
break;
+# endif
case 'k':
kflag = 1;
break;
@@ -299,10 +336,12 @@ main(int argc, char *argv[])
case 'p':
pflag = optarg;
break;
+# if defined(TLS)
case 'R':
tls_cachanged = 1;
Rflag = optarg;
break;
+# endif
case 'r':
rflag = 1;
break;
@@ -344,12 +383,14 @@ main(int argc, char *argv[])
if ((proxy = strdup(optarg)) == NULL)
err(1, NULL);
break;
+# if defined(TLS)
case 'Z':
if (strcmp(optarg, "-") == 0)
Zflag = stderr;
else if ((Zflag = fopen(optarg, "w")) == NULL)
err(1, "can't open %s", optarg);
break;
+# endif
case 'z':
zflag = 1;
break;
@@ -368,9 +409,11 @@ main(int argc, char *argv[])
errx(1, "TCP send window %s: %s",
errstr, optarg);
break;
+# if defined(TLS)
case 'o':
oflag = optarg;
break;
+# endif
case 'S':
# if defined(TCP_MD5SIG)
Sflag = 1;
@@ -381,8 +424,10 @@ main(int argc, char *argv[])
case 'T':
errstr = NULL;
errno = 0;
+# if defined(TLS)
if (process_tls_opt(optarg, &TLSopt))
break;
+# endif
if (process_tos_opt(optarg, &Tflag))
break;
if (strlen(optarg) > 1 && optarg[0] == '0' &&
@@ -392,7 +437,11 @@ main(int argc, char *argv[])
Tflag = (int)strtonum(optarg, 0, 255,
&errstr);
if (Tflag < 0 || Tflag > 255 || errstr || errno)
+# if defined(TLS)
errx(1, "illegal tos/tls value %s", optarg);
+# else
+ errx(1, "illegal tos value %s", optarg);
+# endif
break;
default:
usage(1);
@@ -429,6 +478,7 @@ main(int argc, char *argv[])
} else
usage(1);
+# if defined(TLS)
if (usetls) {
if (Cflag && unveil(Cflag, "r") == -1)
err(1, "unveil");
@@ -451,15 +501,19 @@ main(int argc, char *argv[])
err(1, "unveil");
}
}
+# endif
if (!lflag && kflag)
errx(1, "must use -l with -k");
+# if defined(TLS)
if (uflag && usetls)
errx(1, "cannot use -c and -u");
if ((family == AF_UNIX) && usetls)
errx(1, "cannot use -c and -U");
+# endif
if ((family == AF_UNIX) && Fflag)
errx(1, "cannot use -F and -U");
+# if defined(TLS)
if (Fflag && usetls)
errx(1, "cannot use -c and -F");
if (TLSopt && !usetls)
@@ -478,6 +532,7 @@ main(int argc, char *argv[])
errx(1, "you must specify -c to use -H");
if (tls_expectname && !usetls)
errx(1, "you must specify -c to use -e");
+# endif
/* Get name of temporary socket for unix datagram client */
if ((family == AF_UNIX) && uflag && !lflag) {
@@ -544,6 +599,7 @@ main(int argc, char *argv[])
proxyhints.ai_flags |= AI_NUMERICHOST;
}
+# if defined(TLS)
if (usetls) {
if ((tls_cfg = tls_config_new()) == NULL)
errx(1, "unable to allocate TLS config");
@@ -579,7 +635,8 @@ main(int argc, char *argv[])
err(1, "pledge");
} else if (pledge("stdio inet dns", NULL) == -1)
err(1, "pledge");
- }
+ }
+# endif
if (lflag) {
ret = 0;
@@ -590,6 +647,7 @@ main(int argc, char *argv[])
s = unix_listen(host);
}
+# if defined(TLS)
if (usetls) {
tls_config_verify_client_optional(tls_cfg);
if ((tls_ctx = tls_server()) == NULL)
@@ -598,6 +656,7 @@ main(int argc, char *argv[])
errx(1, "tls configuration failed (%s)",
tls_error(tls_ctx));
}
+# endif
/* Allow only one connection at a time, but stay alive. */
for (;;) {
if (family != AF_UNIX) {
@@ -613,7 +672,11 @@ main(int argc, char *argv[])
* let it receive datagrams from multiple
* socket pairs.
*/
+# if defined(TLS)
readwrite(s, NULL);
+# else
+ readwrite(s);
+# endif
} else if (uflag && !kflag) {
/*
* For UDP and not -k, we will use recvfrom()
@@ -638,9 +701,14 @@ main(int argc, char *argv[])
report_sock("Connection received",
(struct sockaddr *)&z, len, NULL);
+# if defined(TLS)
readwrite(s, NULL);
} else {
struct tls *tls_cctx = NULL;
+# else
+ readwrite(s);
+ } else {
+# endif
int connfd;
len = sizeof(cliaddr);
@@ -654,6 +722,7 @@ main(int argc, char *argv[])
report_sock("Connection received",
(struct sockaddr *)&cliaddr, len,
family == AF_UNIX ? host : NULL);
+# if defined(TLS)
if ((usetls) &&
(tls_cctx = tls_setup_server(tls_ctx, connfd, host)))
readwrite(connfd, tls_cctx);
@@ -663,6 +732,10 @@ main(int argc, char *argv[])
timeout_tls(s, tls_cctx, tls_close);
close(connfd);
tls_free(tls_cctx);
+# else
+ readwrite(connfd);
+ close(connfd);
+# endif
}
if (family == AF_UNIX && uflag) {
if (connect(s, NULL, 0) < 0)
@@ -677,7 +750,11 @@ main(int argc, char *argv[])
if ((s = unix_connect(host)) > 0) {
if (!zflag)
+# if defined(TLS)
readwrite(s, NULL);
+# else
+ readwrite(s);
+# endif
close(s);
} else {
warn("%s", host);
@@ -698,6 +775,7 @@ main(int argc, char *argv[])
for (s = -1, i = 0; portlist[i] != NULL; i++) {
if (s != -1)
close(s);
+# if defined(TLS)
tls_free(tls_ctx);
tls_ctx = NULL;
@@ -708,6 +786,7 @@ main(int argc, char *argv[])
errx(1, "tls configuration failed (%s)",
tls_error(tls_ctx));
}
+# endif
if (xflag)
s = socks_connect(host, portlist[i], hints,
proxy, proxyport, proxyhints, socksv,
@@ -745,6 +824,7 @@ main(int argc, char *argv[])
}
if (Fflag)
fdpass(s);
+# if defined(TLS)
else {
if (usetls)
tls_setup_client(tls_ctx, s, host);
@@ -753,13 +833,19 @@ main(int argc, char *argv[])
if (tls_ctx)
timeout_tls(s, tls_ctx, tls_close);
}
+# else
+ else if (!zflag)
+ readwrite(s);
+# endif
}
}
if (s != -1)
close(s);
+# if defined(TLS)
tls_free(tls_ctx);
tls_config_free(tls_cfg);
+# endif
return ret;
}
@@ -801,6 +887,7 @@ unix_bind(char *path, int flags)
return s;
}
+# if defined(TLS)
int
timeout_tls(int s, struct tls *tls_ctx, int (*func)(struct tls *))
{
@@ -887,6 +974,7 @@ tls_setup_server(struct tls *tls_ctx, in
}
return NULL;
}
+# endif
/*
* unix_connect()
@@ -1112,7 +1200,11 @@ local_listen(const char *host, const cha
* Loop that polls on the network file descriptor and stdin.
*/
void
+# if defined(TLS)
readwrite(int net_fd, struct tls *tls_ctx)
+# else
+readwrite(int net_fd)
+# endif
{
struct pollfd pfd[4];
int stdin_fd = STDIN_FILENO;
@@ -1212,12 +1304,17 @@ readwrite(int net_fd, struct tls *tls_ct
/* try to read from stdin */
if (pfd[POLL_STDIN].revents & POLLIN && stdinbufpos < BUFSIZE) {
ret = fillbuf(pfd[POLL_STDIN].fd, stdinbuf,
+# if defined(TLS)
&stdinbufpos, NULL);
if (ret == TLS_WANT_POLLIN)
pfd[POLL_STDIN].events = POLLIN;
else if (ret == TLS_WANT_POLLOUT)
pfd[POLL_STDIN].events = POLLOUT;
- else if (ret == 0 || ret == -1)
+ else
+# else
+ &stdinbufpos);
+# endif
+ if (ret == 0 || ret == -1)
pfd[POLL_STDIN].fd = -1;
/* read something - poll net out */
if (stdinbufpos > 0)
@@ -1229,12 +1326,17 @@ readwrite(int net_fd, struct tls *tls_ct
/* try to write to network */
if (pfd[POLL_NETOUT].revents & POLLOUT && stdinbufpos > 0) {
ret = drainbuf(pfd[POLL_NETOUT].fd, stdinbuf,
+# if defined(TLS)
&stdinbufpos, tls_ctx);
if (ret == TLS_WANT_POLLIN)
pfd[POLL_NETOUT].events = POLLIN;
else if (ret == TLS_WANT_POLLOUT)
pfd[POLL_NETOUT].events = POLLOUT;
- else if (ret == -1)
+ else
+# else
+ &stdinbufpos);
+# endif
+ if (ret == -1)
pfd[POLL_NETOUT].fd = -1;
/* buffer empty - remove self from polling */
if (stdinbufpos == 0)
@@ -1246,12 +1348,17 @@ readwrite(int net_fd, struct tls *tls_ct
/* try to read from network */
if (pfd[POLL_NETIN].revents & POLLIN && netinbufpos < BUFSIZE) {
ret = fillbuf(pfd[POLL_NETIN].fd, netinbuf,
+# if defined(TLS)
&netinbufpos, tls_ctx);
if (ret == TLS_WANT_POLLIN)
pfd[POLL_NETIN].events = POLLIN;
else if (ret == TLS_WANT_POLLOUT)
pfd[POLL_NETIN].events = POLLOUT;
- else if (ret == -1)
+ else
+# else
+ &netinbufpos);
+# endif
+ if (ret == -1)
pfd[POLL_NETIN].fd = -1;
/* eof on net in - remove from pfd */
if (ret == 0) {
@@ -1278,12 +1385,17 @@ readwrite(int net_fd, struct tls *tls_ct
/* try to write to stdout */
if (pfd[POLL_STDOUT].revents & POLLOUT && netinbufpos > 0) {
ret = drainbuf(pfd[POLL_STDOUT].fd, netinbuf,
+# if defined(TLS)
&netinbufpos, NULL);
if (ret == TLS_WANT_POLLIN)
pfd[POLL_STDOUT].events = POLLIN;
else if (ret == TLS_WANT_POLLOUT)
pfd[POLL_STDOUT].events = POLLOUT;
- else if (ret == -1)
+ else
+# else
+ &netinbufpos);
+# endif
+ if (ret == -1)
pfd[POLL_STDOUT].fd = -1;
/* buffer empty - remove self from polling */
if (netinbufpos == 0)
@@ -1307,21 +1419,31 @@ readwrite(int net_fd, struct tls *tls_ct
}
ssize_t
+# if defined(TLS)
drainbuf(int fd, unsigned char *buf, size_t *bufpos, struct tls *tls)
+# else
+drainbuf(int fd, unsigned char *buf, size_t *bufpos)
+# endif
{
ssize_t n;
ssize_t adjust;
+# if defined(TLS)
if (tls) {
n = tls_write(tls, buf, *bufpos);
if (n == -1)
errx(1, "tls write failed (%s)", tls_error(tls));
} else {
+# endif
n = write(fd, buf, *bufpos);
/* don't treat EAGAIN, EINTR as error */
if (n == -1 && (errno == EAGAIN || errno == EINTR))
+# if defined(TLS)
n = TLS_WANT_POLLOUT;
}
+# else
+ n = -2;
+# endif
if (n <= 0)
return n;
/* adjust buffer */
@@ -1333,21 +1455,31 @@ drainbuf(int fd, unsigned char *buf, siz
}
ssize_t
+# if defined(TLS)
fillbuf(int fd, unsigned char *buf, size_t *bufpos, struct tls *tls)
+# else
+fillbuf(int fd, unsigned char *buf, size_t *bufpos)
+# endif
{
size_t num = BUFSIZE - *bufpos;
ssize_t n;
+# if defined(TLS)
if (tls) {
n = tls_read(tls, buf + *bufpos, num);
if (n == -1)
errx(1, "tls read failed (%s)", tls_error(tls));
} else {
+# endif
n = read(fd, buf + *bufpos, num);
/* don't treat EAGAIN, EINTR as error */
if (n == -1 && (errno == EAGAIN || errno == EINTR))
+# if defined(TLS)
n = TLS_WANT_POLLIN;
}
+# else
+ n = -2;
+# endif
if (n <= 0)
return n;
*bufpos += n;
@@ -1665,6 +1797,7 @@ process_tos_opt(char *s, int *val)
return 0;
}
+# if defined(TLS)
int
process_tls_opt(char *s, int *flags)
{
@@ -1778,6 +1911,7 @@ report_tls(struct tls * tls_ctx, char *
}
}
+# endif
void
report_sock(const char *msg, const struct sockaddr *sa, socklen_t salen,
@@ -1816,17 +1950,12 @@ help(void)
fprintf(stderr, "\tCommand Summary:\n\
\t-4 Use IPv4\n\
\t-6 Use IPv6\n\
- \t-C certfile Public key file\n\
- \t-c Use TLS\n\
\t-D Enable the debug socket option\n\
\t-d Detach from stdin\n\
- \t-e name\t Required name in peer certificate\n\
\t-F Pass socket fd\n\
- \t-H hash\t Hash string of peer certificate\n\
\t-h This help text\n\
\t-I length TCP receive buffer length\n\
\t-i interval Delay interval for lines sent, ports scanned\n\
- \t-K keyfile Private key file\n\
\t-k Keep inbound sockets open for multiple connects\n\
\t-l Listen mode, for inbound connects\n\
\t-M ttl Outgoing TTL / Hop Limit\n\
@@ -1834,14 +1963,12 @@ help(void)
\t-N Shutdown the network socket after EOF on stdin\n\
\t-n Suppress name/port resolutions\n\
\t-O length TCP send buffer length\n\
- \t-o staplefile Staple file\n\
\t-P proxyuser\tUsername for proxy authentication\n\
\t-p port\t Specify local port for remote connects\n\
- \t-R CAfile CA bundle\n\
\t-r Randomize remote ports\n\
\t-S Enable the TCP MD5 signature option\n\
\t-s source Local source address\n\
- \t-T keyword TOS value or TLS options\n\
+ \t-T keyword TOS value\n\
\t-t Answer TELNET negotiation\n\
\t-U Use UNIX domain socket\n\
\t-u UDP mode\n\
@@ -1851,7 +1978,6 @@ help(void)
\t-w timeout Timeout for connects and final net reads\n\
\t-X proto Proxy protocol: \"4\", \"5\" (SOCKS) or \"connect\"\n\
\t-x addr[:port]\tSpecify proxy address and port\n\
- \t-Z Peer certificate file\n\
\t-z Zero-I/O mode [used for scanning]\n\
Port numbers can be individual or ranges: lo-hi [inclusive]\n");
exit(0);
@@ -1861,15 +1987,11 @@ void
usage(int ret)
{
fprintf(stderr,
- "usage: nc [-46cDdFhklNnrStUuvz] [-C certfile] [-e name] "
- "[-H hash] [-I length]\n"
- "\t [-i interval] [-K keyfile] [-M ttl] [-m minttl] [-O length]\n"
- "\t [-o staplefile] [-P proxy_username] [-p source_port] "
- "[-R CAfile]\n"
+ "usage: nc [-46DdFhklNnrStUuvz] [-I length] [-i interval] [-M ttl]\n"
+ "\t [-m minttl] [-O length] [-P proxy_username] [-p source_port]\n"
"\t [-s source] [-T keyword] [-V rtable] [-W recvlimit] "
"[-w timeout]\n"
"\t [-X proxy_protocol] [-x proxy_address[:port]] "
- "[-Z peercertfile]\n"
"\t [destination] [port]\n");
if (ret)
exit(1);