From bb95a749085c3e0fab3a74f708edfe8ffc00ba98264ce63b97d8de1d1414f072 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Adrian=20Schr=C3=B6ter?= Date: Wed, 28 Aug 2024 11:12:11 +0200 Subject: [PATCH] Sync from SUSE:SLFO:Main saptune revision aac25d1f204e14ee70ff70a21956a2cc --- .gitattributes | 23 ++ _service | 14 + _servicedata | 4 + rpmlintrc | 1 + saptune-3.1.3.tgz | 3 + saptune.changes | 817 ++++++++++++++++++++++++++++++++++++++++++++++ saptune.spec | 499 ++++++++++++++++++++++++++++ 7 files changed, 1361 insertions(+) create mode 100644 .gitattributes create mode 100644 _service create mode 100644 _servicedata create mode 100644 rpmlintrc create mode 100644 saptune-3.1.3.tgz create mode 100644 saptune.changes create mode 100644 saptune.spec diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..9b03811 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,23 @@ +## Default LFS +*.7z filter=lfs diff=lfs merge=lfs -text +*.bsp filter=lfs diff=lfs merge=lfs -text +*.bz2 filter=lfs diff=lfs merge=lfs -text +*.gem filter=lfs diff=lfs merge=lfs -text +*.gz filter=lfs diff=lfs merge=lfs -text +*.jar filter=lfs diff=lfs merge=lfs -text +*.lz filter=lfs diff=lfs merge=lfs -text +*.lzma filter=lfs diff=lfs merge=lfs -text +*.obscpio filter=lfs diff=lfs merge=lfs -text +*.oxt filter=lfs diff=lfs merge=lfs -text +*.pdf filter=lfs diff=lfs merge=lfs -text +*.png filter=lfs diff=lfs merge=lfs -text +*.rpm filter=lfs diff=lfs merge=lfs -text +*.tbz filter=lfs diff=lfs merge=lfs -text +*.tbz2 filter=lfs diff=lfs merge=lfs -text +*.tgz filter=lfs diff=lfs merge=lfs -text +*.ttf filter=lfs diff=lfs merge=lfs -text +*.txz filter=lfs diff=lfs merge=lfs -text +*.whl filter=lfs diff=lfs merge=lfs -text +*.xz filter=lfs diff=lfs merge=lfs -text +*.zip filter=lfs diff=lfs merge=lfs -text +*.zst filter=lfs diff=lfs merge=lfs -text diff --git a/_service b/_service new file mode 100644 index 0000000..c4a76e6 --- /dev/null +++ b/_service @@ -0,0 +1,14 @@ + + + 3.1.3 + 3.1.3 + git://github.com/SUSE/saptune.git + git + enable + + + gz + *.tar + + + diff --git a/_servicedata b/_servicedata new file mode 100644 index 0000000..7282f90 --- /dev/null +++ b/_servicedata @@ -0,0 +1,4 @@ + + + git://github.com/SUSE/saptune.git + 66b3e1efeb1d28e7161a35d9c019833fb76a40e3 diff --git a/rpmlintrc b/rpmlintrc new file mode 100644 index 0000000..e160ef6 --- /dev/null +++ b/rpmlintrc @@ -0,0 +1 @@ +addFilter("statically-linked-binary") diff --git a/saptune-3.1.3.tgz b/saptune-3.1.3.tgz new file mode 100644 index 0000000..79bc18f --- /dev/null +++ b/saptune-3.1.3.tgz @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b0251c66bdc8f3bbc635500ea1ccb5d7f93d3a62c6920877e9a7978e108aa8a +size 289119 diff --git a/saptune.changes b/saptune.changes new file mode 100644 index 0000000..31ec264 --- /dev/null +++ b/saptune.changes @@ -0,0 +1,817 @@ +------------------------------------------------------------------- +Fri Jun 28 13:36:47 UTC 2024 - abriel@suse.com + +- update package version of saptune to 3.1.3 + * remove note 1868829 from solution S4HANA-APPSERVER as it is a + HANA DB note and was added by accident + (bsc#1226093) + * for verify and simulate output table - wrap content of the + columns 'actual', 'expected' and 'override', if they exceed a + width of 30 characters (e.g. net.ipv4.ip_local_reserved_ports) + * support inline comments in /etc/sysconfig/saptune + * change handling of the performance options. + Check, if the settings are supported in the get-Functions too. + This should fix the problem with some special Azure VMs + (E20d_v5) on newer SLES SPs + (jsc#SAPSOL-110) + * SAP Note 2578899 updated to Version 48 + setting kernel.pid_max to 4194304 and + start sysctl-logger service + +------------------------------------------------------------------- +Tue Apr 9 13:32:06 UTC 2024 - abriel@suse.com + +- add require of package sysctl-logger for 15SP4 and 15SP5 too + (jsc#PED-6220) + +------------------------------------------------------------------- +Wed Feb 14 08:10:58 UTC 2024 - abriel@suse.com + +- update package version of saptune to 3.1.2 + * to support setups with saptune monitoring and heavy automation + we limited the setting of our saptune lock to commands having + the potential to change anything in the system. + (bsc#1219500) + * fix timestamp in log messages of saptune + * remove redundant version information in header comment of + note definition files + * SAP Note 1656250 updated to Version 63 + SAP Note 1771258 updated to Version 8 + SAP Note 2382421 updated to Version 45 + SAP Note 3024346 updated to Version 10 + but without parameter value changes, only house keeping of the + version section and comment updates + * SAP Note 1984787 updated to Version 42 + SAP Note 2578899 updated to Version 47 + +- add require of package sysctl-logger for 15SP6 + (jsc#PED-5025) + +------------------------------------------------------------------- +Wed Nov 1 17:21:25 UTC 2023 - abriel@suse.com + +- update package version of saptune to 3.1.1 + * typo in logfile directory name creates /varlog/saptune instead + of /var/log/saptune + (bsc#1215969) + * SAP Note 2382421 + fix missing handling for Azure systems regarding parameter + 'net.ipv4.tcp_timestamps'. This exclude setting was left out + during the last SAP Note update by mistake. + * add parameter IGNORE_RELOAD to /etc/sysconfig/saptune to + prevent saptune from stopping and starting the system tuning + during package update + Related to sapconf bug bsc#1209408. + +- create a flag file in preinstall and remove it in posttrans of + the package installation to inform saptune that currently a + package installation/update takes place so that some special + situations can be handled as expected. + +------------------------------------------------------------------- +Wed Aug 30 15:24:11 UTC 2023 - abriel@suse.com + +- update package version of saptune to 3.1.0 + * machine readable interfaces for saptune + add json output support + related json v1 schemas can be found after installation + on the system at /usr/share/saptune/schemas/1.0/ + (jsc#PED-2194, jsc#PED-2195, jsc#SLE-23696) + * enhance the identification of the cloud service provider + (jsc#SLE-23779) + * add a command line syntax check + * colorized and filtered output for 'saptune note verify' + It is now possible to uses a 'color scheme' for the output to + highlight the non-compliant parameter or to limit the verify + output to show only non-compliant parameter. + (jsc#SLE-23727) + * add action 'saptune solution change' to switch to a new + solution even that another solution was already applied. + It's basically a 'revert OLDSOLUTION' && 'apply NEWSOLUTION'. + This will change the Note order in case of additional applied + Notes, but this is intended. + The confirmation for the revert of the old solution can be + suppressed by '--force' + (jsc#PED-2196) + * introduce a Trento naming convention for custom solutions in + the saptune man page to support trento checks. + (jsc#PED-4118) + * deprecate action 'saptune note|solution simulate'. + The action might get removed in a future saptune version + (jsc#PED-2199) + * deprecate support for the v1 vendor or custom specific Note + definition file format + (jsc#SLE-23725) + * detect virtualization environment by 'systemd-detect-virt' and + add the information to 'saptune status'. + (jsc#SLE-23885) + * enhance saptune with the new action 'check' to directly call + the external check script '/usr/sbin/saptune_check'. + (jsc#SLE-23726) + * de-deprecate the MAXDB solution definition. It is still active + supported by SAP. + And add solution NETWEAVER+MAXDB + (jsc#SLE-23724) + * support inline comments in the Note definition files + (jsc#SLE-23729) + * rework Note representation in 'saptune status' output + (jsc#SLE-24530) + * fix problem with 'verify' output, if a sysctl parameter is + empty on the system + (bsc#1199527) + * add hint to the manual page of saptune(8) regarding 'missing' + line feed for 'saptune note applied' and 'saptune note enabled' + It's intended. + (bsc#1193714) + * rework the version section to make it clear, which information + needs to be provided + (jsc#SLE-23722) + * add more information to 'saptune status': + differ between 'enabled' and 'applied' Solutions and add the + related Notes. + differ between Notes and Solutions in the staging area. + rename 'system state' line to 'systemd system state' to prevent + misunderstandings. + add virtualisation information. + * add tuning state to 'saptune status' output. + The check of the tuning state (an internal 'verify' operation) + can be skipped by using the flag '--non-compliance-check'. + In this case the tuning state will be reported as + unknown (checking disabled) + 'saptune status' will exit with a return code of '4', if the + saptune service is enabled, the system is tuned, but the + tuning state is 'not compliant'. + (jsc#SLE-24928) + * add support for the IBM Power architecture to the vendor and + model section tagging + (jsc#SLE-23824) + * add new SAP Note 1868829 to set fs.aio-max-nr and add it to + the HANADB related solutions for SLE12 and SLE15. + * SAP Note 3024346 updated to Version 6 + SAP Note 1557506 updated to Version 16 + SAP Note 1656250 updated to Version 46 + SAP Note 1805750 updated to Version 9 + SAP Note 2161991 updated to Version 28 + SAP Note 2205917 updated to Version 63 + SAP Note 2382421 updated to Version 45 + SAP Note 2534844 updated to Version 15 + SAP Note BOBJ updated to Version 1 + but without parameter value changes, only house keeping of the + version section and comment updates + * SAP Note 1984787 updated to Version 40 + SAP Note 2578899 updated to Version 46 + SAP Note 2684254 updated to Version 23 + SAP Note 1680803 updated to Version 27 + includes version 3.1 of 'SAP Applications on SAP Adaptive + Server Enterprise - Best Practices for Migration and Runtime' + * Solution 'SAP-ASE' changed - remove SAP Note 1410736. + The best practice document (version 3.1) for ASE was changed + and the SAP Note 1410736 is no longer referenced. Instead the + parameter 'net.ipv4.tcp_keepalive_time' is set in + SAP Note 1680803 (the ASE SAP Note) directly. + * introduce an additional parameter 'SKIP_SYSCTL_FILES' in the + /etc/sysconfig/saptune configuration file, which contains a + comma separated list of sysctl.conf files or directories + containing sysctl.conf files, which should be excluded from + the 'additional defined' WARNING messages. + Default is + SKIP_SYSCTL_FILES="/boot" + to skip the WARNINGS for '/boot/sysctl.conf-' + +- check in preinstall and posttrans of the package installation, + if the active tuned profile is still 'saptune', even that this + profile no longer exists. If yes, try to remove it. + (bsc#1194688) + +------------------------------------------------------------------- +Mon Jan 10 14:04:03 UTC 2022 - abriel@suse.com + +- update package version of saptune to 3.0.2 +- avoid excluding LVM slaves when getting valid block devices + (bsc#1194299) +- fix 'not compliant' state for energy_perf_bias on Power systems + and suppress misleading error message regarding missing 'mokutil' + (bsc#1193435) +- fix wrong behaviour of 'saptune revert all', if the saptune + service was stopped between the two commands 'apply' and + 'revert all' +- 'saptune service enablestart|disablestop' now always perform + both actions and does no longer stop working, if the service is + already started|stopped. + (bsc#1193241) +- restrict the sys section of the AWS note 1656250 to the + availability of a nvme block device to support AWS x1e instances + too. + sys section definition of Note 1656250 changed. + (bsc#1192029) +- abandon the dependency to 'mokutil' by relying on sysfs to + detect a secure boot environment. + Related to bsc#1193435 +- support /etc/fstab entries with 4 instead of 6 fields as these + are valid entries. + Change error handling from 'panic' to error log messages. + (bsc#1193580) +- enhance man page 'saptune.8'. + Add entry 'configured Note' and some more descriptions of the + entries from 'saptune service status' + (bsc#1192697) +- as the Power systems (hardware architecture 'ppc64le') does not + support files in '/sys/class/dmi' (this directory is not + available on the 'ppc64le' hardware architecture) some of our + section 'tags' will not work. + Add some additional log messages to identify the cause and add + a hint to the man page. +- fix block device settings (e.g. NRREQ) for multipath devices + (bsc#1193576) +- 'saptune verify' will now report a non existing sysctl or sys + parameter as 'not available on the system' (footnote) and this + parameter will not affect the compliance state. + But a warning is displayed to raise attention to may be typos in + the parameter name. +- 'saptune status' now reports the 'real' unit state, no mapping + of not running (inactive) service to simply 'stopped' any more. + (bsc#1194334) + +------------------------------------------------------------------- +Tue Nov 9 19:06:09 UTC 2021 - abriel@suse.com + +- update package version of saptune to 3.0.1 +- fix the scheduler settings for multi path devices and + suppress missleading warning messages regarding vendor and model + information during block device detection + (bsc#1192460) +- fix override of custom solutions + (bsc#1192062) +- add missing update function for enabled solutions and add a + special fix to correct the 3.0.0 behavior + (bsc#1192053) +- saptune_check - degraded system is no longer considered an error + (bsc#1192272) +- log missing model and vendor information to the saptune log file + (bsc#1190509) + +------------------------------------------------------------------- +Mon Sep 13 13:03:36 UTC 2021 - abriel@suse.com + +- update package version of saptune to 3.0.0 + This will be additional reflected in the saptune version found in + /etc/sysconfig/saptune (SAPTUNE_VERSION) + So now we will have saptune version 3 + +- saptune version 3 + Strengthen configuration process with staging, checks of external + changes and expansion of automation to new platforms (Azure, AWS) + and hardware specifics + (jsc#SLE-21029 and jsc#SLE-20985) + +- remove saptune version 1 + (jsc#SLE-10823 and jsc#SLE-10842) +- remove usage of tuned from saptune + Add an own systemd service file for saptune to start/stop tuning + of parameter values during a reboot of the system. + Add a new saptune action 'service' to handle the saptune.service + supporting start/stop/enable/disable/status a.s.m. + The saptune action 'daemon', which handled tuned.service in the + past, is now flagged as 'deprecated' and internally linked to the + new action 'service' + (jsc#SLE-5589, jsc#SLE-5588, jsc#SLE-6457) +- add a sanity check to detect Note definition files which do not + exist anymore, because they were renamed or deleted, but without + reverting them before. + saptune will now print an error message, remove the Note from the + tracking variables in /etc/sysconfig/saptune and try to revert + the related parameter settings. + (bsc#1149205) +- check, if json input file is empty and handle some left-over + files from the migration from saptune v1 to saptune v2 + (bsc#1167618) +- To support system parameters only relevant for specific SLES + releases, service packs and/or hardware architectures saptune + now supports 'tagged' sections inside the Note definition files. + (jsc#SLE-13246, jsc#SLE-13245) +- new kernel requirement for Power added to SAP-Note 2205917 and + 2684254 + SAP Note 2205917 updated to Version 61 + SAP Note 2684254 updated to Version 15 + (bsc#1167416) +- SAP Note 2382421 updated to Version 37 + and move all 'not-well-defined' parameters from the 'reminder' + section into the 'sysctl' section, but with 'empty' values. + Use an override file to define the values fitting your system + requirements + (bsc#1170672) +- support empty parameter values in the Note definition files and + not only in the override file. + This is needed for the support of SAP Notes like 2382421, so that + the customer is able to simply use an override file to define + some special parameters instead of using a customer specific Note + definition file. + needed for bsc#1170672 + (jsc#TEAM-1702) +- report an 'error' instead of 'info' and set the exit code to '1', + if we reject the apply of a solution + (bsc#1167213) +- Skip perf bias change if secure boot is enabled + When a system is in lockdown mode, i.e., Secure Boot is enabled, + MSR cannot be altered in user-space. So check, if Secure Boot is + enabled using the mokutil utility and skip setting the perf bias + in case it is. + (bsc#1176243) +- rework the internal block device handling to speed up the apply + of block device related tunings on systems with a high number of + block devices. + (bsc#1178207) +- change block device handling to handle multipath devices + correctly. Only the DM multipath devices will be used for the + settings, but not its paths. + (bsc#1179275) +- fixed wrong comparison used for setting FORCE_LATENCY + (bsc#1185702) +- add keyword 'all' to the 'rpm' section description in the man page + saptune-note(5) + (bsc#1182287) +- support note definition versions containing digits, upper-case + and lower-case letters, dots, underscores, minus and plus signs. + (bsc#1182289) +- fixed issue with 'verify' operation and parameter + 'VSZ_TMPFS_PERCENT'. As this parameter is only used to calculate + the value of 'ShmFileSystemSizeMB' (if it is not set to a value + >0 in the Note definition file) it will not be checked and + compared during the saptune operation 'verify'. A footnote is + pointing this out. + (bsc#1182009) +- SAP Note 1771258 update nofile values + (bsc#1164720) +- SAP Note 2684254 updated to Version 20 + SAP Note 2578899 updated to Version 39 + SAP Note 1680803 updated to Version 26 + +- enhancements for saptune version 3 + All jsc#TEAM-* entries mentioned below are related to this rework + (jsc#SLE-16972) + +- Implement a lock to avoid multiple instances of saptune running + in parallel. + (jsc#TEAM-1700) +- Support for non-colorized output + If redirecting the output from saptune to a pipe, you no longer + need to deal with the 'ugly' control sequences for the colorized + output. + (jsc#TEAM-1679) +- Add enable/disable for systemd units and support all systemd unit + types in section [service] + (jsc#TEAM-1701) +- remove script /usr/share/doc/packages/saptune/sapconf2saptune + and the associated man page + (jsc#TEAM-1707) +- implement staging of Note definition file and solution + definitions. + The idea is to freeze the saptune configuration to avoid config + changes on package update when adding/removing/changing notes + or solutions within the package + (jsc#TEAM-1844) +- support custom solutions and override files for solutions. + Partners and customers will now be able to define their own + solution definitions by using files in /etc/saptune/extra + or to override the shipped solution definitions by using + override files in /etc/saptune/override + (jsc#TEAM-1706) +- support for device specific configurations + only supported for the [block] section, tags are 'vendor' and + 'model' to support special block devices of a dedicated hardware + vendor or a dedicated hardware model + (jsc#TEAM-1728) +- add support for AZURE cloud (SAP Note 2993054) + (jsc#TEAM-2676) +- add support for AWS cloud (SAP Note 1656250) + (jsc#TEAM-1754 and jsc#TEAM-1755) +- add NVMe support to the block device handling to support AWS + (jsc#TEAM-2675) +- add SAP Note 3024346 (a NetApp note) + (jsc#TEAM-3454) +- rework daemon and service actions + (jsc#TEAM-3154) +- add support for 'read_ahead_kb' and 'max_sectors_kb' to the + [block] section + (jsc#TEAM-1699) +- add a warning to the reminder section of SAP Note 2382421 + regarding iSCSI devices and setting of 'net.ipv4.tcp_syn_retries' + (jsc#TEAM-1705) +- for the actions 'note customise' and 'note create' check, if the + customer has changed something during the editor session. + If not, remove the temporary created note definition file. + (jsc#TEAM-825) +- add support for [sys] section + and handle double configurations for parameters defined in the + [sys] section + (jsc#TEAM-3342) +- check system sysctl config files as mentioned in the comments of + /etc/sysctl.conf and in man page sysctl.conf(5) for sysctl + parameters currently set by saptune notes. Print a warning and a + footnote for 'verify' and 'customize'. + (jsc#TEAM-1696) +- add support for [filesystem] section + only check filesystem mount options, not modify. Starting with + filesystem type 'xfs' + (jsc#TEAM-4093) +- add SAP Note 900929 for SAP Netweaver workloads. + It's the equivalent to the HANA Note 1980196. + (jsc#TEAM-4386) +- mv state files from /var/lib/saptune to /run/saptune to solve + the problem of state files surviving a reboot. +- add /sbin/saptune_check +- add the description of the solution definitions shipped with + saptune to the man page saptune(8) + (jsc#TEAM-4260) + +------------------------------------------------------------------- +Mon Feb 25 16:59:15 UTC 2020 - abriel@suse.com + +- update version of saptune v2 to 2.0.3 +- changes to the UserTasksMax handling in saptune + In SLE15 the limit is removed from the systemd login manager and + therefore the setting is no longer supported in SLE15 by saptune. + + On a system running SLE12 we do not restart the logind service, + but try to reload the new configuration after creating or + removing the drop-in file for UserTasksMax by using + 'systemctl reload-or-try-restart systemd-logind' + as display managers do not like a restart of the logind service. + (bsc#1161791) +- add commands for listing enabled Notes/Solutions to saptune + (bsc#1160564) +- correct typo in the year in the man page headline of man page + saptune-note(5) +- SAP Note 1410736 updated to Version 6 + correct typo net.ipv4.tcp_probes to net.ipv4.tcp_keepalive_probes + +------------------------------------------------------------------- +Tue Jan 14 14:57:59 UTC 2020 - abriel@suse.com + +- if a parameter is not supported by the system, the note action + 'verify' will no longer report this as an error even if the value + is not compliant. + Additionally if there is a non compliant 'grub' parameter, which + has a compliant 'alternative' setting availabel (see man page + saptune-note(5) for details), the note action 'verify' will no + longer report this as an error + (bsc#1159671) + +------------------------------------------------------------------- +Thu Jan 2 12:33:00 UTC 2020 - abriel@suse.com + +- remove no longer needed and now misleading message at the end of + note action 'revert'. +- check, if sapconf service is available before disabling this + service during 'saptune daemon start' + (bsc#1156049) + +------------------------------------------------------------------- +Tue Dec 3 09:37:55 UTC 2019 - abriel@suse.com + +- add action 'delete' to the 'note' operation to delete a customer + or vendor specific Note definition file including the + corresponding override file if available. + A confirmation is needed to finish the action. + + add action 'rename' to the 'note' operation to rename a customer + or vendor specific Note definition file to a new name. If a + corresponding override file is available, this file will be + renamed too. A confirmation is needed to finish the action. + + If the Note is already applied, the action will be terminated + with the information, that the Note first needs to be reverted + before it can be deleted or renamed. + (jsc#SLE-9283) + +------------------------------------------------------------------- +Fri Nov 8 17:03:01 UTC 2019 - abriel@suse.com + +- Inform the customer that - by intention - the command + 'saptune note customise ' + does not apply changes immediately. It just changes the + configuration in the 'override' file. These changes have to be + applied in a second step. + This is explained in the man page saptune_v2(8) and a message is + printed in the logs and on the screen to inform the customer. + (bsc#1142467) + +------------------------------------------------------------------- +Thu Nov 7 09:59:54 UTC 2019 - abriel@suse.com + +- Add warning to man page, not to rename/remove/modify active + configurations + (bsc#1149002) + +------------------------------------------------------------------- +Mon Oct 28 12:27:21 UTC 2019 - abriel@suse.com + +- update version of saptune v2 to 2.0.2 +- support multi-queue I/O scheduler for block devices + (bsc#1152598) + +------------------------------------------------------------------- +Fri Oct 4 11:24:11 UTC 2019 - abriel@suse.com + +- check, if the directory /etc/security/limits.d exists before + writing the limits drop-in file. If not, create it. + +- add the '--no-pager' option to 'systemctl --list-unit-files' to + get all services at once. + +- add missing search pattern to the update helper script to find all + old and superfluous notes during upgrade from SLE12 to SLE15 + + For the daemon operations do not exit with an error, if a note + definition file does not exist. Instead only log and print an + error message, but continue with applying the other notes + (bsc#1142526) + +------------------------------------------------------------------- +Fri Jul 19 08:49:08 UTC 2019 - abriel@suse.com + +- on 12SP1 and 12SP2 the directory /etc/security/limits.d may not + exist. So create the missing directory during postinstall of the + package. + +------------------------------------------------------------------- +Mon Jun 17 10:15:05 UTC 2019 - Angela Briel + +- update version of saptune v2 to 2.0.1 +- update version of saptune v1 to 1.1.9 for migration purposes +- resetting all values to clean the system during package removal + +- bugfixing saptune version 1: + fix saptune issues with /etc/security/limits.conf (bsc#1124485) + add deprecated message to the description of some notes + set scheduler for note SUSE-GUIDE-01 correctly (bsc#1123808) + + No additional improvements or upgrades planned for saptune v1 + For new features or current SAP Note settings please migrate to + saptune v2. + +- support migration from saptune v1 to saptune v2 + ship both versions of saptune in one package to support a + smooth migration controlled by the customer. + see man saptune-migrate(5) for more information +- support note name changes and note deletion during update of + saptune v2 from SLE12 to SLE15 +- support different SAP Note definitions and solution definitions + related to the used operation system version + (distinguish between SLE12 and SLE15 at the moment) + +- Remove calculation of optimized values, only set the values from + the configuration file irrespective of the current system value. + Current system value can be increase or decrease. + ATTENTION: saptune no longer respects higher system values. + Use the override option to change the values of the Note + definition files, if needed + (bsc#1124488) + +- mark the Notes SUSE-GUIDE-01 and SUSE-GUIDE-02 as deprecated in + saptune v1 and remove these Note definitions from saptune v2 + (bsc#1116799) +- add support helper script sapconf2saptune and the man page +- add new man pages saptune_v1.8, saptune_v2.8, saptune-note.5 + and saptune-migrate.7 + rewrite man page saptune.8 +- add bash-completion for saptune +- add action 'show' to the 'note' operation to print content of + the note definition file to stdout +- add new action 'create' to support the customer/vendor while + creating a vendor or customer specific file in /etc/saptune/extra + using the template file /usr/share/saptune/NoteTemplate.conf +- simplify file name syntax for the vendor files available in + /etc/saptune/extra. Old file names still valid and supported. + Add header support (version, date, description) for the vendor + files available in /etc/saptune/extra as already available for + the note definition files in /usr/share/saptune/notes +- no longer write or remove entries from /etc/security/limits.conf. + Instead add or remove drop-in files in /etc/security/limits.d + The filename syntax for the drop-in files /etc/security/limits.d + is saptune---.conf + The limits entry syntax inside the Note definition files changed + to support more than one limits settings in the definition file + (bsc#1128322) +- preserve comment sections of the security limits file + /etc/security/limits.conf. Especially, if this is the only + content of the file. + (bsc#1124485) +- work with the current Note definition file to define the pagecache + settings and not with the default file + rename PAGECACHE_LIMIT_IGNORE_DIRTY to the correct sysctl name + vm.pagecache_limit_ignore_dirty + (bsc#1126220) +- setting of UserTaskMax is not done in the postinstall of the + package. It's now done by applying the related SAP Notes. + (bsc#1124489) +- starting to support severities INFO, WARNING, ERROR and DEBUG + for the logging and add a defined format for the log messages +- remove saptune as active tuned profile during action + 'saptune daemon stop' +- start/stop services, if requested by SAP Notes, but do not + enable/disable these services + (bsc#1128325) +- adapt the parameter oriented save state file handling (store and + revert) to the special needs of the security limits parameter + (bsc#1124485) +- disable parameter settings using an override file (bsc#1124486) +- store the order of the note as they are applied to get the same + system tuning result after a system reboot as before +- correct the revert of the vm.dirty parameters by handling their + counterpart parameters in addition. + (bsc#1124487) +- adjust operation customize to the new configuration files and + override location and enable customize option for vendor and + customer specific files in /etc/saptune/extra + (bsc#1124487) +- Change output format of the operations list, verify and simulate + (bsc#1124487) +- Display footnotes during 'verify' and 'simulate' + (bsc#1124487) +- print current applied note order at the end of 'saptune note list' + and 'saptune note verify' +- remove Netweaver formula for page cache calculation. Use the + HANA approach '2% system memory' for both +- display a warning message, if a [block] section is found in the + Note definition file because on systems with a huge number of + block devices this operation may take some time +- Add force_latency handling to 'cpu' section. + Use the files in /sys/devices/system/cpu/cpu* instead of + /dev/cpu_dma_latency. + Remove the parameter from the tuned.conf file and add it to + the SAP note files '1984787' and '2205917' +- Add action 'saptune revert all' and add parameter based saved + state files to support proper revert functionality + (bsc#1124487) +- Add override file handling for the solution definition using + /etc/saptune/override/solution (bsc#1124486) +- Read solution definition from file /usr/share/saptune/solution + instead of static coding inside of saptune. + (bsc#1124486) +- tag deprecated solutions during list operation +- allow only ONE solution to be applied +- new solution definitions as discussed with SAP and Alliance team +- support solution names with '+' +- make sure a note, which is part of an applied solution definition, + but was reverted manually later, will NOT applied again after a + system reboot. +- One configuration file per SAP Note (bsc#1124486) +- add new SAP Notes and adapt content of SAP Notes +- Handle different locations of the new configuration files + (/usr/share/saptune/note, /etc/saptune/extra) + (bsc#1124486) +- Allow parameter override by the customer (bsc#1124486) +- Expand section handling of the 'ini file' handler to handle the + new configuration file entries. Supported sections: + version, reminder, login, mem, vm, block, limits, sysctl, + pagecache, cpu, service, rpm, grub + (bsc#1124486) + +------------------------------------------------------------------- +Thu Jan 3 14:09:01 UTC 2019 - abriel@suse.com + +- remove new line from println arg list of main.go to support newer + go versions. + (bsc#1120741) +- update version to 1.1.8 + +------------------------------------------------------------------- +Thu Oct 25 08:33:28 UTC 2018 - abriel@suse.com + +- never ever stop or disable uuidd.socket in saptune (bsc#1100107) +- update version to 1.1.7 + +------------------------------------------------------------------- +Thu Apr 26 13:32:53 UTC 2018 - abriel@suse.com + +- correct content of /etc/systemd/logind.conf.d/sap.conf. + (bsc#1089864) + +- improve error messages and exclude special block devices + from 'number of request' settings. Improve the verify option for + the block devices. + (bsc#1079599) + +------------------------------------------------------------------- +Thu Feb 8 09:32:45 UTC 2018 - gboiko@suse.com + +- Fix a typo in package description. (bsc#1053374) +- Update from version 1.1.3 to 1.1.4 + +------------------------------------------------------------------- +Fri Dec 15 10:30:39 UTC 2017 - abriel@suse.com + +- Start to support multiqueue schedulers. + Writing a message to the log file, if a block device does not + support the choosen scheduler. + (bsc#1072562) + +------------------------------------------------------------------- +Wed Dec 13 08:53:33 UTC 2017 - abriel@suse.com + +- Check, if pagecache limit is available at the system. If yes, add + SAP note 1557506 to the note list and the solution definition of + saptune. If not, skip SAP note 1557506 silently + (bsc#1071539, fate#323778) + +------------------------------------------------------------------- +Mon Dec 11 15:40:25 UTC 2017 - abriel@suse.com + +- Skip using tuned-adm command inside of saptune. Instead write + 'saptune' profile directly to /etc/tuned/active_profile and + enable and start the tuned service + Remove the workaround for the tuned problem with section [cpu] + (bsc#1060514) + +------------------------------------------------------------------- +Fri Nov 10 13:32:05 UTC 2017 - abriel@suse.com + +- workaround for a tuned problem with section [cpu] + (bsc#1060514) + +------------------------------------------------------------------- +Wed Oct 25 14:44:39 UTC 2017 - abriel@suse.com + +- support customer entries in /etc/security/limits.conf containing + values like 'unlimited' instead of an integer value. + (bsc#1060469) +- change error handling and redirect error messages to stderr instead + of stdout. (bsc#1050521) + +------------------------------------------------------------------- +Fri Aug 11 08:48:41 UTC 2017 - hguo@suse.com + +- Fix a typo in package description. + (bsc#1053374) + +------------------------------------------------------------------- +Tue Jun 27 12:12:32 UTC 2017 - abriel@suse.com + +- Amend logind's behaviour + (bsc#1031355, bsc#1039309, bsc#1043844) + +------------------------------------------------------------------- +Fri May 12 08:28:43 UTC 2017 - abriel@suse.com + +- update man page to reflect the changes for bsc#1026172 + +------------------------------------------------------------------- +Thu Apr 27 15:51:02 UTC 2017 - abriel@suse.com + +- add solution SAP ASE (Sybase) and SAP Business OBJects (BOBJ) + according to fate#320359. + +------------------------------------------------------------------- +Fri Mar 24 13:32:38 UTC 2017 - abriel@suse.com + +- Support of vendor specific tune files located in /etc/saptune/extra + (bsc#1026172). + +------------------------------------------------------------------- +Mon Nov 14 13:12:21 UTC 2016 - hguo@suse.com + +- Tune a PowerPC little endian system in a way similar to x86 system. + Bump version to 1.0.5 to fix (bsc#1009529). + +------------------------------------------------------------------- +Fri Oct 21 12:58:32 UTC 2016 - hguo@suse.com + +- Fix processing of CLI parameter "--help" (bsc#1006114). +- Fix startup failure caused by absence of sapconf package (bsc#1006187). + +------------------------------------------------------------------- +Tue Aug 2 12:51:35 UTC 2016 - hguo@suse.com + +- Avoid conflicting with sysconfig path of sapconf. (bsc#988186) + Bump versin to 1.0.3. + +------------------------------------------------------------------- +Fri Jul 8 11:50:27 UTC 2016 - hguo@suse.com + +- Remove conflict against sapconf to resolve + bsc#988186. + Bump version to 1.0.2. + +------------------------------------------------------------------- +Mon Jul 4 08:58:42 UTC 2016 - hguo@suse.com + +- Exclusively build on X86_64 and PPC64le. + Continue with fate#320360, fate#320361, fate#320362, fate#320633. + +------------------------------------------------------------------- +Fri Jun 3 09:26:13 UTC 2016 - hguo@suse.com + +- Remove ExclusiveArch. +- Control uuidd as part of the tuning process. +- Minor changes in the wording of CLI program output. +- saptune conflicts with sapconf. +- Bump version to 1.0.1. +- fate#320360, fate#320361, fate#320362, fate#320633. + +------------------------------------------------------------------- +Thu Apr 28 09:32:50 UTC 2016 - hguo@suse.com + +- First revision. + Implement fate#320360, fate#320361, fate#320362, fate#320633. + diff --git a/saptune.spec b/saptune.spec new file mode 100644 index 0000000..4f30804 --- /dev/null +++ b/saptune.spec @@ -0,0 +1,499 @@ +# +# spec file for package saptune +# +# Copyright (c) 2017-2024 SUSE LLC +# +# All modifications and additions to the file contributed by third parties +# remain the property of their copyright owners, unless otherwise agreed +# upon. The license for this file, and modifications and additions to the +# file, is the same license as for the pristine package itself (unless the +# license for the pristine package is not an Open Source License, in which +# case the license is the MIT License). An "Open Source License" is a +# license that conforms to the Open Source Definition (Version 1.9) +# published by the Open Source Initiative. + +# Please submit bugfixes or comments via https://bugs.opensuse.org/ +# + + +%define GONS github.com/SUSE +%define SRCDIR src/%{GONS}/%{name} +%if ! %{defined _fillupdir} + %define _fillupdir %{_localstatedir}/adm/fillup-templates +%endif + +Name: saptune +Version: 3.1.3 +Release: 0 +Summary: Comprehensive system tuning management for SAP solutions +License: GPL-3.0-only +Group: System/Management +URL: https://www.suse.com/products/sles-for-sap +Source0: %{name}-%{version}.tgz +Source1: rpmlintrc +BuildRequires: bash-completion +BuildRequires: go +Requires: logrotate +Requires: sysstat +Requires: /usr/bin/cpupower +Requires: /usr/bin/md5sum +Requires: uuidd +Requires: vim +ExclusiveArch: x86_64 ppc64le +%{?systemd_requires} +%if 0%{?sle_version} >= 150000 +Requires: systemd >= 234-24.42 +%else +Requires: systemd >= 228-142.1 +%endif +%if 0%{?sle_version} >= 150400 +Requires: sysctl-logger +%endif + +%description +The utility adjusts system parameters such as kernel parameters and resource +limits to allow running various SAP solutions at satisfactory performance. +The utility can be used in place of sapconf. + +%prep +mkdir -p %{SRCDIR} +cd %{SRCDIR} +tar xf %{SOURCE0} + +%build +export GOPATH=$(pwd) +export GO111MODULE=off +cd %{SRCDIR} +gzip ospackage/man/saptune.8 +gzip ospackage/man/saptune-note.5 +gzip ospackage/man/saptune-migrate.7 +#go build +go build -ldflags "-X '%{GONS}/%{name}/actions.RPMVersion=%{version}'" + +%install +cd %{SRCDIR} +mkdir -p %{buildroot}/%{_sbindir} +install -m 0755 %{name} %{buildroot}/%{_sbindir}/ +install -m 0755 ospackage/bin/* %{buildroot}%{_sbindir}/ + +# Sysconfig file +mkdir -p %{buildroot}/%{_fillupdir} +install -m 0644 ospackage/etc/sysconfig/%{name} %{buildroot}/%{_fillupdir}/sysconfig.%{name} + +# json v1 schemata +mkdir -p %{buildroot}/%{_datadir}/%{name}/schemas/1.0 +pushd ospackage/%{_datadir}/%{name}/schemas/1.0 +for schemafiles in *.json; do + install -m 0644 $schemafiles %{buildroot}/%{_datadir}/%{name}/schemas/1.0 +done +popd + +# scripts location +mkdir -p %{buildroot}/%{_datadir}/%{name}/scripts +echo %{version} > %{buildroot}/%{_datadir}/%{name}/scripts/.updhelp +pushd ospackage/%{_datadir}/%{name}/scripts +for scriptfiles in *; do + install -m 0755 $scriptfiles %{buildroot}/%{_datadir}/%{name}/scripts +done +popd + +# note files location +mkdir -p %{buildroot}/%{_datadir}/%{name}/notes +pushd ospackage/%{_datadir}/%{name}/notes +for notefiles in *; do + case $notefiles in + 1984787|2205917|1557506) + # SLE12 notes + %if 0%{?sle_version} < 150000 + install -m 0644 $notefiles %{buildroot}/%{_datadir}/%{name}/notes/ + %endif + ;; + 2578899|2684254) + # SLE15 notes + %if 0%{?sle_version} >= 150000 + install -m 0644 $notefiles %{buildroot}/%{_datadir}/%{name}/notes/ + %endif + ;; + *) + install -m 0644 $notefiles %{buildroot}/%{_datadir}/%{name}/notes/ + ;; + esac +done +popd + +# NoteTemplate file +install -m 0644 ospackage/%{_datadir}/%{name}/NoteTemplate.conf %{buildroot}/%{_datadir}/%{name}/NoteTemplate.conf + +# solution definition +mkdir -p %{buildroot}/%{_datadir}/%{name}/sols +%if 0%{?sle_version} < 150000 + pushd ospackage/%{_datadir}/%{name}/sols +%else + pushd ospackage/%{_datadir}/%{name}/sols_15 +%endif +for solfiles in *; do + install -m 0644 $solfiles %{buildroot}/%{_datadir}/%{name}/sols/ +done +popd +# deprecated solutions +mkdir -p %{buildroot}/%{_datadir}/%{name}/deprecated +#pushd ospackage/%{_datadir}/%{name}/deprecated +#for solfiles in *; do +# install -m 0644 $solfiles %{buildroot}/%{_datadir}/%{name}/deprecated/ +#done +#popd +# SolutionTemplate file +install -m 0644 ospackage/%{_datadir}/%{name}/SolutionTemplate.conf %{buildroot}/%{_datadir}/%{name}/SolutionTemplate.conf + +# vendor file location +mkdir -p %{buildroot}/%{_sysconfdir}/%{name}/extra + +# override file location +mkdir -p %{buildroot}/%{_sysconfdir}/%{name}/override + +# systemd service file +mkdir -p %{buildroot}%{_unitdir}/systemd/system/ %{buildroot}%{_sbindir}/ +install -m 0644 ospackage/svc/saptune.service %{buildroot}%{_unitdir}/ +ln -s /usr/sbin/service %{buildroot}%{_sbindir}/rcsaptune + +# manual pages +mkdir -p %{buildroot}/%{_mandir}/man5 +install -m 0644 ospackage/man/saptune-note.5.gz %{buildroot}/%{_mandir}/man5/ +mkdir -p %{buildroot}/%{_mandir}/man7 +install -m 0644 ospackage/man/saptune-migrate.7.gz %{buildroot}/%{_mandir}/man7/ +mkdir -p %{buildroot}/%{_mandir}/man8 +install -m 0644 ospackage/man/saptune.8.gz %{buildroot}/%{_mandir}/man8/ + +# bash-completion +mkdir -p %{buildroot}/%{_datadir}/bash-completion/completions +install -m 0644 ospackage/%{_datadir}/bash-completion/completions/%{name}.completion %{buildroot}%{_datadir}/bash-completion/completions/%{name} + +# supportconfig plugin +install -D -m 755 ospackage/usr/lib/supportconfig/plugins/%{name} %{buildroot}/usr/lib/supportconfig/plugins/%{name} + +# working and staging location +mkdir -p %{buildroot}/%{_localstatedir}/lib/%{name}/working +mkdir -p %{buildroot}/%{_localstatedir}/lib/%{name}/staging/latest + +# logdir +mkdir -p %{buildroot}/%{_localstatedir}/log/%{name} + +# logrotate +mkdir -p %{buildroot}/%{_sysconfdir}/logrotate.d +install -m 0644 ospackage/logrotate/%{name} %{buildroot}/%{_sysconfdir}/logrotate.d/ + +%pre +%service_add_pre saptune.service +if [ $1 -ne 1 ]; then + # package update + NOTEDIR=/usr/share/saptune/notes + if [ ! -d ${NOTEDIR} ]; then + # installed package version is < 2.0, update v1 to v3 + # indicated by missing directory /usr/share/saptune/notes + + # only change version to '1' (migration), if saptune is really used + # so check, if a solution or a note is defined + if (grep '^TUNE_FOR_SOLUTIONS[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1) && (grep '^TUNE_FOR_NOTES[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1); then + echo "saptune NOT configured and NOT used - version will be set to '3'" + else + echo "ATTENTION: saptune Version 1 is currently configured and used - but this version of saptune is no longer supported. Please migrate to Version 3 after the package update is done. saptune will stop working" + + # to allow a migration from v1 to v3 after the installation, we need to preserve some 'old' data. + touch /tmp/update_v1tov3_saptune_inst || : + # preserve 'old' BOBJ and ASE note definition files for saptune + # version 1 compatibility + if [ -f /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.conf ]; then + cp /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.conf /etc/saptune/extra/SAP_BOBJ_n2c.conf + fi + if [ -f /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf ]; then + cp /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf /etc/saptune/extra/SAP_ASE_n2c.conf + fi + fi + else + # package version 2.0 or later + # check SAPTUNE_VERSION + stvers=$(grep ^SAPTUNE_VERSION= /etc/sysconfig/saptune | awk -F '"' '{ print $2 }') + if [ "$stvers" == 1 ]; then + # check, if saptune is really used + # so check, if a solution or a note is defined + if (grep '^TUNE_FOR_SOLUTIONS[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1) && (grep '^TUNE_FOR_NOTES[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1); then + # saptune NOT configured and NOT used + : + else + echo "ATTENTION: saptune currently running in Version 1 compatibility mode. Please migrate to Version 3 after the package update is done." + fi + fi + if [ ! -d /var/lib/saptune/working/sols ]; then + # installed package version is 2.x, update v2 to v3, save 'old' solution definition file + cp /usr/share/saptune/solutions /var/lib/saptune/.v2_solutions + fi + # special fix only for 3.0.0 installations + if [ -d /var/lib/saptune/working/sols ] && [ ! -f /usr/share/saptune/scripts/.updhelp ]; then + touch /tmp/update_fix_300_saptune_inst || : + fi + fi + + # to prevent saptune related tuned error messages anytime after this + # saptune package installation switch off tuned to remove the 'active' + # saptune profile + # 'tuned-adm off' is sadly the only possibility to remove an 'active' + # saptune profile + systemctl -q is-active tuned && [[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] && (echo "found active tuned with saptune profile"; touch /run/saptune_is_active_in_tuned; tuned-adm off) || : + # if the tuned profile is saptune, try to switch off tuned + # if 'tuned-adm off' before had worked, the profile is empty + # if not try again + [[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] && (echo "found saptune as tuned profile, try to switch off tuned"; touch /run/saptune_is_active_in_tuned; tuned-adm off || systemctl stop tuned.service; > /etc/tuned/active_profile) || : + # if the tuned profile is still saptune, try to override the file + [[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] && (echo "found saptune as tuned profile, override /etc/tuned/active_profile"; touch /run/saptune_is_active_in_tuned; systemctl stop tuned.service; > /etc/tuned/active_profile) || : +else + # initial installation + # check, if old config files from a former installation still exist + if [ -f /etc/sysconfig/saptune ]; then + mv /etc/sysconfig/saptune /etc/sysconfig/saptune.rpmold || : + fi +fi +touch /run/saptune_during_pkg_inst || : + +%post +%fillup_only -n saptune +# workaround for the missing directory. +mkdir -p /etc/security/limits.d +# cleanup 'typo' directory (bsc#1215969) +rm -rf /varlog || : + +# handling of working area is the same for initial install or update +# initial install or update from v1 or v2 - STAGING is 'false' by default +# the entire content of package area gets copied directly to the working area +# which is empty at that state. +# update from v3 or later - STAGING may be 'true' +staging=$(grep ^STAGING= /etc/sysconfig/saptune | awk -F '"' '{ print $2 }') +if [ "$staging" == "true" ]; then + # handle staging area and DON'T touch the working area + touch /tmp/update_saptune_staging_area || : +else + # staging is NOT active, same behavior as with v2 + # adjust the notes of an enabled solution, if needed + /usr/share/saptune/scripts/upd_helper enabledSol || : + if [ -f /var/lib/saptune/.v2_solutions ]; then + # remove no longer needed old solution definition file + rm -f /var/lib/saptune/.v2_solutions || : + fi + + # set up working area + if [ -d /var/lib/saptune/working/notes ] || [ -d /var/lib/saptune/working/sols ]; then + rm -rf /var/lib/saptune/working/* || : + fi + mkdir -p /var/lib/saptune/working/notes || : + cp /usr/share/saptune/notes/* /var/lib/saptune/working/notes || : + mkdir -p /var/lib/saptune/working/sols || : + cp /usr/share/saptune/sols/* /var/lib/saptune/working/sols || : +fi + +if [ $1 -ne 1 ]; then + # package update + # rewrite saptune version in /etc/sysconfig/saptune as fillup will not + # change variables + sed -i 's/SAPTUNE_VERSION="2"/SAPTUNE_VERSION="3"/' /etc/sysconfig/saptune + + if [ -f /tmp/update_v1tov3_saptune_inst ]; then + # update from v1 to v3, same as v1 to v2 as nothing changed in v1 + # step is needed to support migration after package update + /usr/share/saptune/scripts/upd_helper v1tov2pi || : + else + # update from v2 to v2 or higher, call update helper script in posttrans + touch /tmp/update_sle12tosel15_saptune_inst || : + # clean up some leftover files from older saptune v2 versions + /usr/share/saptune/scripts/upd_helper cleanup || : + fi + # special fix for update from 3.0.0 only + if [ -f /tmp/update_fix_300_saptune_inst ]; then + rm -f /tmp/update_fix_300_saptune_inst || : + /usr/share/saptune/scripts/upd_helper fix_300 || : + fi +#else + # initial install +fi +%service_add_post saptune.service + +%preun +%service_del_preun saptune.service +test -n "$FIRST_ARG" || FIRST_ARG=$1 +if [ $FIRST_ARG -eq 0 ]; then + # Package removal, not upgrade + stvers=$(grep ^SAPTUNE_VERSION= /etc/sysconfig/saptune | awk -F '"' '{ print $2 }') + # revert settings + if (grep '^TUNE_FOR_SOLUTIONS[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1) && (grep '^TUNE_FOR_NOTES[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1); then + # saptune note configured and not used - nothing to do + : + else + # saptune configured and used - revert settings to clean up the system + if [ "$stvers" == 1 ]; then + saptune daemon revert >/dev/null 2>&1 || : + else + saptune service revert >/dev/null 2>&1 || : + fi + fi + + # to suppress error messages from tuned, if the current active profile is + # the removed saptune profile + (systemctl -q is-active tuned && [[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] ) && (tuned-adm off; /usr/sbin/saptune daemon stop >/dev/null 2>&1) || : + # if the tuned profile is saptune, try to switch off tuned + # if 'tuned-adm off' before had worked, the profile is empty + # if not try again + [[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] && (> /etc/tuned/active_profile) || : + + # clean up saved states left over + rm -rf /run/saptune/parameter/* /run/saptune/sections/* /run/saptune/saved_state/* || : + # clean up working and staging area + rm -rf /var/lib/saptune/staging/latest/* /var/lib/saptune/working/* /var/lib/saptune/working/.tmbackup || : + # preserve 'old' BOBJ and ASE note definition files for saptune + # version 1 compatibility + if [ -f /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.conf ]; then + echo "warning: /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.conf saved as /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.rpmsave" + mv /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.conf /etc/saptune/extra/SAP_BOBJ-SAP_Business_OBJects.rpmsave || : + fi + if [ -f /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf ]; then + echo "warning: /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf saved as /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf.rpmsave" + mv /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf /etc/saptune/extra/SAP_ASE-SAP_Adaptive_Server_Enterprise.conf.rpmsave || : + fi + # preserve saptune configuration, if saptune was used + # so check, if a solution or a note is defined + if (grep '^TUNE_FOR_SOLUTIONS[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1) && (grep '^TUNE_FOR_NOTES[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1) && (grep '^NOTE_APPLY_ORDER[[:space:]]*=[[:space:]]*""' /etc/sysconfig/saptune >/dev/null 2>&1); then + rm /etc/sysconfig/saptune || : + else + echo "warning: /etc/sysconfig/saptune saved as /etc/sysconfig/saptune.rpmsave" + mv /etc/sysconfig/saptune /etc/sysconfig/saptune.rpmsave || : + fi +fi + +%postun +test -n "$FIRST_ARG" || FIRST_ARG=$1 +if [ $FIRST_ARG -eq 0 ]; then + # Package removal, not upgrade + %service_del_postun saptune.service +fi + +%posttrans -p /bin/bash +# Use a real bash script with an explicit "exit 0" at the end to be by default fail safe +# an explicit "exit 1" must be use to enforce package install/upgrade/erase failure where needed + +# Begin refresh systemd units and clean up possibly obsolete systemd units +# The following is a generic way how to refresh and/or clean up systemd units. +# A systemd unit may need a refresh after updating a package when the new package +# had installed a changed systemd unit file for an enabled systemd unit. +# A systemd unit may become obsolete by updating a package (see bnc#904215). +# A systemd unit is considered to have become obsolete when the systemd +# symlink /etc/systemd/system/.../unit_name -> /path/to/unit_file is broken. +# When during package update the new package does no longer provide a unit file +# then the systemd symlink becomes broken after the files of the old package +# had been actually removed by RPM. +# According to /usr/share/doc/packages/rpm/manual/triggers and according +# to https://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets#Scriptlet_Ordering +# and http://fedoraproject.org/wiki/Packaging:ScriptletSnippets#Scriptlet_Ordering +# from the new package only "posttrans of new package" is run after "removal of old package" +# so that the new package must do the clean up as RPM posttrans scriptlet. +if systemctl --quiet is-enabled saptune.service 2>/dev/null; then + # Refresh still valid enabled systemd units and clean up possibly obsoleted systemd units: + # Enforce systemd to use the current unit file which is usually the unit file of the new package + # but also in case of custom units (that use other unit files) a "reenable" won't hurt because + # "reenable" does not implicitly stop a running service which is "the right thing" because + # a RPM package installation must not automatically disrupt (restart) a running service. + # Using "--force reenable" is essential to clean up possibly conflicting/broken symlinks. + # (without "|| :" build fails with "Failed to get D-Bus connection: No connection to service manager. posttrans script ... failed"): + systemctl --quiet --force reenable saptune.service 2>/dev/null || : +else + # Refresh still valid disabled systemd units and clean up possibly obsoleted systemd units: + # First using "--force reenable" is essential to clean up possibly conflicting/broken symlinks + # because there is no "--force disable" that would clean up possibly conflicting/broken symlinks + # see https://bugzilla.opensuse.org/show_bug.cgi?id=904215#c34 + # so that first the unit has a clean state and then it is set back to disabled (as it was before). + # If a disabled systemd unit has become obsoleted, "systemctl --force reenable" will clean it up + # which means the unit gets removed and the subsequent "systemctl disable" will do nothing. + # (without "|| :" build fails with "Failed to get D-Bus connection: No connection to service manager. posttrans script ... failed"): + systemctl --quiet --force reenable saptune.service 2>/dev/null || : + systemctl --quiet disable saptune.service 2>/dev/null || : +fi +rm -f /run/saptune_during_pkg_inst +if [ -f /tmp/update_v1tov3_saptune_inst ]; then + rm -f /tmp/update_v1tov3_saptune_inst || : + # get back custom note definition files for BOBJ and/or ASE + # needed for migration, if customer had applied these notes + /usr/share/saptune/scripts/upd_helper v1tov2pt || : +else + # cleanup of old saptune v1 sysconfig files + # leftover from customer migration + for file in saptune-note-SUSE-GUIDE-01 saptune-note-1275776 saptune-note-SUSE-GUIDE-02 saptune-note-1557506; do + if [ -f /etc/sysconfig/${file} ]; then + rm -f /etc/sysconfig/${file} + fi + done +fi +if [ -f /tmp/update_sle12tosel15_saptune_inst ]; then + rm -f /tmp/update_sle12tosel15_saptune_inst || : + # check for SAP Note name changes between SLE12 and SLE15 + /usr/share/saptune/scripts/upd_helper sle12to15pt || : +fi +if [ -f /tmp/update_saptune_staging_area ]; then + rm -f /tmp/update_saptune_staging_area || : + # handle staging area and DON'T touch the working area, needs to run + # after 'upd_helper sle12to15pt' + /usr/share/saptune/scripts/upd_helper staging || : +fi +if [ -f /run/saptune_is_active_in_tuned ]; then + # cleanup 'saptune with tuned is active' indicator + rm -f /run/saptune_is_active_in_tuned || : + # if saptune with tuned support was used/active (in v2 mode) + # stop and disable tuned service + # enable and start saptune service + # (jsc#SLE-10987 decision) + (systemctl stop tuned.service; systemctl disable tuned.service; systemctl enable saptune.service; systemctl start saptune.service) || : +fi +# bsc#1194688 - sometimes the tuned active profile is still 'saptune' even that +# the profile no longer exists. Try to clear. +[[ $(cat /etc/tuned/active_profile 2>/dev/null) == saptune ]] && (> /etc/tuned/active_profile) || : +exit 0 + +%files +%defattr(-,root,root) +%{_sbindir}/%{name} +%{_sbindir}/saptune_check +%{_sbindir}/rcsaptune +%{_unitdir}/saptune.service +%{_fillupdir}/sysconfig.%{name} +%{_mandir}/man5/* +%{_mandir}/man7/* +%{_mandir}/man8/* +%dir %{_sysconfdir}/%{name} +%dir %{_sysconfdir}/%{name}/extra +%dir %{_sysconfdir}/%{name}/override +%dir %{_datadir}/%{name} +%dir %{_datadir}/%{name}/notes +%dir %{_datadir}/%{name}/sols +%dir %{_datadir}/%{name}/deprecated +%dir %{_datadir}/%{name}/schemas +%dir %{_datadir}/%{name}/schemas/1.0 +%dir %{_datadir}/%{name}/scripts +%{_datadir}/%{name}/notes/* +%{_datadir}/%{name}/sols/* +#%{_datadir}/%{name}/deprecated/* +%{_datadir}/%{name}/schemas/1.0/* +%{_datadir}/%{name}/scripts/* +%{_datadir}/%{name}/scripts/.updhelp +%{_datadir}/%{name}/NoteTemplate.conf +%{_datadir}/%{name}/SolutionTemplate.conf +%{_datadir}/bash-completion/completions/%{name} +%dir %{_prefix}/lib/supportconfig +%dir %{_prefix}/lib/supportconfig/plugins +%{_prefix}/lib/supportconfig/plugins/%{name} +%dir %{_localstatedir}/lib/%{name} +%dir %{_localstatedir}/lib/%{name}/working +%dir %{_localstatedir}/lib/%{name}/staging/latest +%dir %{_localstatedir}/lib/%{name}/staging +%dir %{_localstatedir}/log/%{name} +#noreplace - to get saptune.rpmnew, if file on disk has changed +%config(noreplace) %{_sysconfdir}/logrotate.d/%{name} +# Created at run-time by saptune executable +%attr(0755,root,root) %ghost %dir %{_localstatedir}/lib/%{name}/working/notes +%attr(0755,root,root) %ghost %dir %{_localstatedir}/lib/%{name}/working/sols + +%changelog