shim/shim.changes

1188 lines
47 KiB
Plaintext
Raw Normal View History

-------------------------------------------------------------------
Mon Sep 16 07:28:57 UTC 2024 - Gary Ching-Pang Lin <glin@suse.com>
- Update shim-install to use the 'removable' way for SL-Micro
(bsc#1230316)
* 433cc4e Always use the removable way for SL-Micro
-------------------------------------------------------------------
Sun May 19 15:08:27 UTC 2024 - Dennis Tseng <dennis.tseng@suse.com>
-- Update to version 15.8
- Various CVE fixes are already merged into this version
mok: fix LogError() invocation (bsc#1215099,CVE-2023-40546)
avoid incorrectly trusting HTTP headers (bsc#1215098,CVE-2023-40547)
Fix integer overflow on SBAT section size on 32-bit system (bsc#1215100,CVE-2023-40548)
Authenticode: verify that the signature header is in bounds (bsc#1215101,CVE-2023-40549)
pe: Fix an out-of-bound read in verify_buffer_sbat() (bsc#1215102,CVE-2023-40550)
pe-relocate: Fix bounds check for MZ binaries (bsc#1215103,CVE-2023-40551)
- remove shim-Enable-the-NX-compatibility-flag-by-default.patch
The codes in this patch are already existing in shim-15.8
The NX flag is disable which is same as the default value of shim-15.8,
hence, not need to enable it by this patch now.
- Patches (git log --oneline --reverse 15.7..15.8)
657b248 Make sbat_var.S parse right with buggy gcc/binutils
7c76425 Enable the NX compatibility flag by default.
89972ae CryptoPkg/BaseCryptLib: Fix buffer overflow issue in realloc wrapper
c7b3051 pe: Align section size up to page size for mem attrs
e4f40ae pe: Add IS_PAGE_ALIGNED macro
f23883c Don't loop forever in load_certs() with buggy firmware
1f38cb3 Optionally allow to keep shim protocol installed
102a658 Drop invalid calls to `CRYPTO_set_mem_functions`
aae3df0 test-sbat: Fix exit code
cca3933 Block Debian grub binaries with SBAT < 4
cf59f34 Further improve load_certs() for non-compliant drivers/firmwares
0601f44 SBAT-related documents formatting and spelling
0640e13 Add a security contact email address in README.md
0bfc397 Work around malformed path delimiters in file paths from DHCP
a8b0b60 pe: only process RelocDir->Size of reloc section
f7a4338 Skip testing msleep()
549d346 Rename 'msecs' to 'usecs' to avoid potential confusion
908c388 Change type of fallback_verbose_wait from int to unsigned long
05eae92 Add SbatLevel_Variable.txt to document the various revocations
243f125 Use -Wno-unused-but-set-variable for Cryptlib and OpenSSL
89d25a1 Add a make rule for compile_commands.json
118ff87 Add gnu-stack notes
f132655 test: Make our fake dprintf be a statement.
be00279 Remove CentOS 7 test builds.
9964960 Split pe.c up even more.
569270d Test (and fix) ImageAddress()
61e9894 Verify signature before verifying sbat levels
1578b55 Add libFuzzer support for csv.c
a0673e3 Fix a 1-byte memory leak in .sbat parsing.
e246812 Add libFuzzer support to the .sbat parser.
fd43eda Work around ImageAddress() usage mistake
1e985a3 Correctly free memory allocated in handle_image()
dbbe3c8 mok: Avoid underflow in maximum variable size calculation
04111d4 Make some of the static analysis tools a little easier to run
7ba7440 compile_commands.json: remove stuff clang doesn't like
66e6579 CVE-2023-40546 mok: fix LogError() invocation
f271826 Add primitives for overflow-checked arithmetic operations.
8372147 pe-relocate: Add a fuzzer for read_header()
5a5147d CVE-2023-40551: pe-relocate: Fix bounds check for MZ binaries
e912071 pe-relocate: make read_header() use checked arithmetic operations.
93ce255 CVE-2023-40550 pe: Fix an out-of-bound read in verify_buffer_sbat()
e7f5fdf pe-relocate: Ensure nothing else implements CVE-2023-40550
afdc503 CVE-2023-40549 Authenticode: verify that the signature header is in bounds.
96dccc2 CVE-2023-40548 Fix integer overflow on SBAT section size on 32-bit system
dae82f6 Further mitigations against CVE-2023-40546 as a class
ea0f9df Allow SbatLevel data from external binary
b078ef2 Always clear SbatLevel when Secure Boot is disabled
7dfb687 BS Variables for bootmgr revocations
a967c0e shim should not self revoke
577cedd Print message when refusing to apply SbatLevel
e801b0d sbat revocations: check the full section name
0226b56 CVE-2023-40547 - avoid incorrectly trusting HTTP headers
6f0c8d2 Print errors when setting/clearing memory attrs
57c0eed Updated Revocations for January 2024 CVEs
49c6d95 Fix some minor ia32 build issues.
be8ff7c post-process-pe: Don't set the NX_COMPAT flag by default after all.
13abd9f pe-relocate: Avoid __builtin_add_overflow() on GCC < 5
c46c975 Suppress "Failed to open <..>\revocations.efi" when file does not exist
30a4f37 Rename "previous" revocations to "automatic"
6f395c2 Build time selectable automatic SBATLevel revocations
a23e2f0 netboot read_image() should not hardcode DEFAULT_LOADER
993a345 Try to load revocations.efi even if directory read fails
1770a03 gitmodules: use shim-15.8 for gnu-efi branch
5914984 (HEAD -> main, tag: latest-release, tag: 15.8, origin/main, origin/HEAD) Bump version to 15.8
-------------------------------------------------------------------
Thu Mar 14 06:05:12 UTC 2024 - Gary Ching-Pang Lin <glin@suse.com>
- Update shim-install to set the SRK algorithm for the grub2
TPM2 key protector (bsc#1213945)
92d0f4305df73 Set the SRK algorithm for the TPM2 protector
- Add the missing BuildRequires: update-bootloader-rpm-macros
for the update_bootloader_* macros in %post and %posttrans
-------------------------------------------------------------------
Wed Sep 20 09:00:36 UTC 2023 - Gary Ching-Pang Lin <glin@suse.com>
- Update shim-install to fix boot failure of ext4 root file system
on RAID10 (bsc#1205855)
226c94ca5cfca Use hint in looking for root if possible
- Adopt the macros from fde-tpm-helper-macros to update the
signature in the sealed key after a bootloader upgrade
-------------------------------------------------------------------
Thu Jul 13 07:20:50 UTC 2023 - Gary Ching-Pang Lin <glin@suse.com>
- Upgrade shim-install to support TPM 2.0 Key File
b540061 Adopt TPM 2.0 Key File for grub2 TPM 2.0 protector
-------------------------------------------------------------------
Tue Jul 11 14:02:16 UTC 2023 - Marcus Meissner <meissner@suse.com>
- remove compat efi dir and binaries
-------------------------------------------------------------------
Mon Jun 12 11:12:36 UTC 2023 - Marcus Meissner <meissner@suse.com>
- Update shim to 15.7-150300.4.16.1 from SLE15-SP3
- include aarch64 shims.
- do not require shim-susesigned, was a workaround on 15-sp2.
- quieten factory-auto bot as we are not buiding from source:
- shim-arch-independent-names.patch removed
- shim-change-debug-file-path.patch removed
-------------------------------------------------------------------
Wed Apr 26 07:09:48 UTC 2023 - Dennis Tseng <dennis.tseng@suse.com>
- Update shim to 15.7-150300.4.11.1 from SLE15-SP3
+ Version: 15.7, "Thu Mar 17 2023"
+ Update the SLE signatures
+ Include the fixes for bsc#1205588, bsc#1202120, bsc#1201066,
(bsc#1198458, CVE-2022-28737), bsc#1198101, bsc#1193315, bsc#1193282
-------------------------------------------------------------------
Thu Apr 13 05:28:10 UTC 2023 - Joey Lee <jlee@suse.com>
- Upgrade shim-install for bsc#1210382
After closing Leap-gap project since Leap 15.3, openSUSE Leap direct
uses shim from SLE. So the ca_string is 'SUSE Linux Enterprise Secure Boot
CA1', not 'openSUSE Secure Boot CA1'. It causes that the update_boot=no,
so all files in /boot/efi/EFI/boot are not updated.
The 86b73d1 patch added the logic that using ID field in os-release for
checking Leap distro and set ca_string to 'SUSE Linux Enterprise Secure
Boot CA1'. Then /boot/efi/EFI/boot/* can also be updated.
- https://github.com/SUSE/shim-resources (git log --oneline)
86b73d1 Fix that bootx64.efi is not updated on Leap
f2e8143 Use the long name to specify the grub2 key protector
7283012 cryptodisk: support TPM authorized policies
49e7a0d Do not use tpm_record_pcrs unless the command is in command.lst
26c6bd5 Have grub take a snapshot of "relevant" TPM PCRs
5c2c3ad Handle different cases of controlling cryptomount volumes during first stage boot
a5c5734 Introduce --no-grub-install option
-------------------------------------------------------------------
Tue Aug 17 09:29:05 UTC 2021 - Marcus Meissner <meissner@suse.com>
- restore the shim-susesigned installation via buildrequires here.
-------------------------------------------------------------------
Thu Jul 22 06:47:20 UTC 2021 - jlee@suse.com
- Update to shim to 15.4-4.7.1 from SLE15-SP3
+ Version: 15.4, "Thu Jul 15 2021"
+ Update the SLE signatures
+ Include the fixes for bsc#1187696, bsc#1185261, bsc#1185441,
bsc#1187071, bsc#1185621, bsc#1185261, bsc#1185232, bsc#1185261,
bsc#1187260, bsc#1185232.
- Remove shim-install because the shim-install is updated in SLE
15.4 RPM.
-------------------------------------------------------------------
Wed May 26 11:50:43 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com>
- shim-install: remove the unexpected residual "removable" label
for Azure (bsc#1185464, bsc#1185961)
-------------------------------------------------------------------
Wed May 19 01:31:02 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com>
- shim-install: instead of assuming "removable" for Azure, remove
fallback.efi from \EFI\Boot and copy grub.efi/cfg to \EFI\Boot
to make \EFI\Boot bootable and keep the boot option created by
efibootmgr (bsc#1185464, bsc#1185961)
-------------------------------------------------------------------
Fri May 7 08:46:32 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com>
- shim-install: always assume "removable" for Azure to avoid the
endless reset loop (bsc#1185464)
-------------------------------------------------------------------
Tue Apr 27 08:58:26 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com>
- Also package the debuginfo and debugsource
- Drop COPYRIGHT file since it's already in the shim rpm package
-------------------------------------------------------------------
Tue Apr 27 01:33:36 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com>
- Update to the unified shim binary from SLE15-SP3 for SBAT support
(bsc#1182057)
+ Version: 15.4, "Thu Apr 22 03:26:48 UTC 2021"
+ Merged EKU codesign check (bsc#1177315)
- Drop merged patches
+ shim-arch-independent-names.patch
+ shim-change-debug-file-path.patch
+ shim-bsc1092000-fallback-menu.patch
+ shim-always-mirror-mok-variables.patch
+ shim-correct-license-in-headers.patch
+ gcc9-fix-warnings.patch
+ shim-fix-gnu-efi-3.0.11.patch
+ shim-bsc1173411-only-check-efi-var-on-sb.patch
- Drop shim-opensuse-cert-prompt.patch since the openSUSE kernel
enabled lockdown.
-------------------------------------------------------------------
Fri Oct 16 02:00:45 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Include suse-signed shim (bsc#1177315)
- shim-install: Support changing default shim efi binary in
/usr/etc/default/shim and /etc/default/shim (bsc#1177315)
-------------------------------------------------------------------
Mon Aug 24 09:12:18 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- shim-install: install MokManager to \EFI\boot to process the
pending MOK request (bsc#1175626, bsc#1175656)
-------------------------------------------------------------------
Thu Aug 6 09:43:19 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Amend the check of %shim_enforce_ms_signature
-------------------------------------------------------------------
Fri Jul 31 08:05:05 UTC 2020 - Johannes Segitz <jsegitz@suse.com>
- Updated SUSE signature
-------------------------------------------------------------------
Wed Jul 22 09:23:02 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Update the path to grub-tpm.efi in shim-install (bsc#1174320)
-------------------------------------------------------------------
Fri Jul 10 07:21:27 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Use vendor-dbx to block old SUSE/openSUSE signkeys (bsc#1168994)
+ Add dbx-cert.tar.xz which contains the certificates to block
and a script, generate-vendor-dbx.sh, to generate
vendor-dbx.bin
+ Add vendor-dbx.bin as the vendor dbx to block unwanted keys
- Drop shim-opensuse-signed.efi
+ We don't need it anymore
-------------------------------------------------------------------
Fri Jul 10 06:28:44 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Add shim-bsc1173411-only-check-efi-var-on-sb.patch to only check
EFI variable copying when Secure Boot is enabled (bsc#1173411)
-------------------------------------------------------------------
Tue Mar 31 08:38:56 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Use the full path of efibootmgr to avoid errors when invoking
shim-install from packagekitd (bsc#1168104)
-------------------------------------------------------------------
Mon Mar 30 06:20:47 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Use "suse_version" instead of "sle_version" to avoid
shim_lib64_share_compat being set in Tumbleweed forever.
-------------------------------------------------------------------
Mon Mar 16 09:42:34 UTC 2020 - Gary Ching-Pang Lin <glin@suse.com>
- Add shim-fix-gnu-efi-3.0.11.patch to fix the build error caused
by the upgrade of gnu-efi
-------------------------------------------------------------------
Wed Nov 27 06:23:11 UTC 2019 - Michael Chang <mchang@suse.com>
- shim-install: add check for btrfs is used as root file system to enable
relative path lookup for file. (bsc#1153953)
-------------------------------------------------------------------
Fri Aug 16 04:07:30 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Fix a typo in shim-install (bsc#1145802)
-------------------------------------------------------------------
Fri Apr 19 10:32:11 UTC 2019 - Martin Liška <mliska@suse.cz>
- Add gcc9-fix-warnings.patch (bsc#1121268).
-------------------------------------------------------------------
Mon Apr 15 09:24:07 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Add shim-opensuse-signed.efi, the openSUSE shim-15+git47 binary
(bsc#1113225)
-------------------------------------------------------------------
Fri Apr 12 08:50:49 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Disable AArch64 build (FATE#325971)
+ AArch64 machines don't use UEFI CA, at least for now.
-------------------------------------------------------------------
Thu Apr 11 15:52:47 UTC 2019 - jsegitz@suse.com
- Updated shim signature: signature-sles.x86_64.asc (bsc#1120026)
-------------------------------------------------------------------
Thu Feb 14 17:03:00 UTC 2019 - rw@suse.com
- Fix conditions for '/usr/share/efi'-move (FATE#326960)
-------------------------------------------------------------------
Mon Jan 28 03:18:53 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Amend shim.spec to remove $RPM_BUILD_ROOT
-------------------------------------------------------------------
Thu Jan 17 17:12:14 UTC 2019 - rw@suse.com
- Move 'efi'-executables to '/usr/share/efi' (FATE#326960)
(preparing the move to 'noarch' for this package)
-------------------------------------------------------------------
Mon Jan 14 09:48:59 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Update shim-install to handle the partitioned MD devices
(bsc#1119762, bsc#1119763)
-------------------------------------------------------------------
Thu Dec 20 04:13:00 UTC 2018 - Gary Ching-Pang Lin <glin@suse.com>
- Update to 15+git47 (bsc#1120026, FATE#325971)
+ git commit: b3e4d1f7555aabbf5d54de5ea7cd7e839e7bd83d
- Retire the old openSUSE 4096 bit certificate
+ Those programs are already out of maintenance.
- Add shim-always-mirror-mok-variables.patch to mirror MOK
variables correctly
- Add shim-correct-license-in-headers.patch to correct the license
declaration
- Refresh patches:
+ shim-arch-independent-names.patch
+ shim-change-debug-file-path.patch
+ shim-bsc1092000-fallback-menu.patch
+ shim-opensuse-cert-prompt.patch
- Drop upstreamed patches:
+ shim-bsc1088585-handle-mok-allocations-better.patch
+ shim-httpboot-amend-device-path.patch
+ shim-httpboot-include-console.h.patch
+ shim-only-os-name.patch
+ shim-remove-cryptpem.patch
-------------------------------------------------------------------
Wed Dec 5 10:28:00 UTC 2018 - Gary Ching-Pang Lin <glin@suse.com>
- Update shim-install to specify the target for grub2-install and
change the boot efi file name according to the architecture
(bsc#1118363, FATE#325971)
-------------------------------------------------------------------
Tue Aug 21 07:36:36 UTC 2018 - glin@suse.com
- Enable AArch64 build (FATE#325971)
+ Also add the aarch64 signature files and rename the x86_64
signature files
-------------------------------------------------------------------
Tue May 29 06:41:59 UTC 2018 - glin@suse.com
- Add shim-bsc1092000-fallback-menu.patch to show a menu before
system reset ((bsc#1092000))
-------------------------------------------------------------------
Tue Apr 10 03:45:39 UTC 2018 - glin@suse.com
- Add shim-bsc1088585-handle-mok-allocations-better.patch to avoid
double-freeing after enrolling a key from the disk (bsc#1088585)
+ Also refresh shim-opensuse-cert-prompt.patch due to the change
in MokManager.c
-------------------------------------------------------------------
Tue Apr 3 08:37:55 UTC 2018 - glin@suse.com
- Install the certificates with a shim suffix to avoid conflicting
with other packages (bsc#1087847)
-------------------------------------------------------------------
Fri Mar 23 04:47:35 UTC 2018 - glin@suse.com
- Add the missing leading backlash to the DEFAULT_LOADER
(bsc#1086589)
-------------------------------------------------------------------
Fri Jan 5 08:41:42 UTC 2018 - glin@suse.com
- Add shim-httpboot-amend-device-path.patch to amend the device
path matching rule for httpboot (bsc#1065370)
-------------------------------------------------------------------
Thu Jan 4 08:17:44 UTC 2018 - glin@suse.com
- Update to 14 (bsc#1054712)
- Adjust make commands in spec
- Drop upstreamed fixes
+ shim-add-fallback-verbose-print.patch
+ shim-back-to-openssl-1.0.2e.patch
+ shim-fallback-workaround-masked-ami-variables.patch
+ shim-fix-fallback-double-free.patch
+ shim-fix-httpboot-crash.patch
+ shim-fix-openssl-flags.patch
+ shim-more-tpm-measurement.patch
- Add shim-httpboot-include-console.h.patch to include console.h
in httpboot.c to avoid build failure
- Add shim-remove-cryptpem.patch to replace functions in CryptPem.c
with the null function
- Update SUSE/openSUSE specific patches
+ shim-only-os-name.patch
+ shim-arch-independent-names.patch
+ shim-change-debug-file-path.patch
+ shim-opensuse-cert-prompt.patch
-------------------------------------------------------------------
Fri Dec 29 18:41:12 UTC 2017 - ngompa13@gmail.com
- Fix debuginfo + debugsource subpackage generation for RPM 4.14
- Set the RPM groups correctly for debug{info,source} subpackages
- Drop deprecated and out of date Authors information in description
-------------------------------------------------------------------
Wed Sep 13 04:13:21 UTC 2017 - glin@suse.com
- Add shim-back-to-openssl-1.0.2e.patch to avoid rejecting some
legit certificates (bsc#1054712)
- Add the stderr mask back while compiling MokManager.efi since the
warnings in Cryptlib is back after reverting the openssl commits.
-------------------------------------------------------------------
Tue Aug 29 08:44:25 UTC 2017 - glin@suse.com
- Add shim-add-fallback-verbose-print.patch to print the debug
messages in fallback.efi dynamically
- Refresh shim-fallback-workaround-masked-ami-variables.patch
- Add shim-more-tpm-measurement.patch to measure more components
and support TPM better
-------------------------------------------------------------------
Wed Aug 23 10:28:44 UTC 2017 - glin@suse.com
- Add upstream fixes
+ shim-fix-httpboot-crash.patch
+ shim-fix-openssl-flags.patch
+ shim-fix-fallback-double-free.patch
+ shim-fallback-workaround-masked-ami-variables.patch
- Remove the stderr mask while compiling MokManager.efi since the
warnings in Cryptlib were fixed.
-------------------------------------------------------------------
Tue Aug 22 04:51:08 UTC 2017 - glin@suse.com
- Add shim-arch-independent-names.patch to use the Arch-independent
names. (bsc#1054712)
- Refresh shim-change-debug-file-path.patch
- Disable shim-opensuse-cert-prompt.patch automatically in SLE
- Diable AArch64 until we have a real user and aarch64 signature
-------------------------------------------------------------------
Fri Jul 14 16:40:52 UTC 2017 - bwiedemann@suse.com
- Make build reproducible by avoiding race between find and cp
-------------------------------------------------------------------
Thu Jun 22 03:26:00 UTC 2017 - glin@suse.com
- Update to 12
- Rename the result EFI images due to the upstream name change
+ shimx64 -> shim
+ mmx64 -> MokManager
+ fbx64 -> fallback
- Refresh patches:
+ shim-only-os-name.patch
+ shim-change-debug-file-path.patch
+ shim-opensuse-cert-prompt.patch
- Drop upstreamed patches:
+ shim-httpboot-support.patch
+ shim-bsc973496-mokmanager-no-append-write.patch
+ shim-bsc991885-fix-sig-length.patch
+ shim-update-openssl-1.0.2g.patch
+ shim-update-openssl-1.0.2h.patch
-------------------------------------------------------------------
Tue May 23 03:44:48 UTC 2017 - glin@suse.com
- Add the build flag to enable HTTPBoot
-------------------------------------------------------------------
Wed Mar 22 10:54:41 UTC 2017 - mchang@suse.com
- shim-install: add option --suse-enable-tpm (fate#315831)
-------------------------------------------------------------------
Fri Jan 13 09:21:49 UTC 2017 - mchang@suse.com
- Support %posttrans with marcos provided by update-bootloader-rpm-macros
package (bsc#997317)
-------------------------------------------------------------------
Fri Nov 18 09:23:01 UTC 2016 - glin@suse.com
- Add SIGNATURE_UPDATE.txt to state the steps to update
signature-*.asc
- Update the comment of strip_signature.sh
-------------------------------------------------------------------
Wed Sep 21 09:55:40 UTC 2016 - mchang@suse.com
- shim-install :
* add option --no-nvram (bsc#999818)
* improve removable media and fallback mode handling
-------------------------------------------------------------------
Fri Aug 19 06:46:59 UTC 2016 - mchang@suse.com
- shim-install : fix regression of password prompt (bsc#993764)
-------------------------------------------------------------------
Fri Aug 5 02:53:54 UTC 2016 - glin@suse.com
- Add shim-bsc991885-fix-sig-length.patch to fix the signature
length passed to Authenticode (bsc#991885)
-------------------------------------------------------------------
Wed Aug 3 09:10:25 UTC 2016 - glin@suse.com
- Update shim-bsc973496-mokmanager-no-append-write.patch to try
append write first
-------------------------------------------------------------------
Tue Aug 2 02:59:46 UTC 2016 - glin@suse.com
- Add shim-update-openssl-1.0.2h.patch to update openssl to 1.0.2h
- Bump the requirement of gnu-efi due to the HTTPBoot support
-------------------------------------------------------------------
Mon Aug 1 09:01:59 UTC 2016 - glin@suse.com
- Add shim-httpboot-support.patch to support HTTPBoot
- Add shim-update-openssl-1.0.2g.patch to update openssl to 1.0.2g
and Cryptlib to 5e2318dd37a51948aaf845c7d920b11f47cdcfe6
- Drop patches since they are merged into
shim-update-openssl-1.0.2g.patch
+ shim-update-openssl-1.0.2d.patch
+ shim-gcc5.patch
+ shim-bsc950569-fix-cryptlib-va-functions.patch
+ shim-fix-aarch64.patch
- Refresh shim-change-debug-file-path.patch
- Add shim-bsc973496-mokmanager-no-append-write.patch to work
around the firmware that doesn't support APPEND_WRITE (bsc973496)
- shim-install : remove '\n' from the help message (bsc#991188)
- shim-install : print a message if there is no valid EFI partition
(bsc#991187)
-------------------------------------------------------------------
Mon May 9 11:20:56 UTC 2016 - rw@suse.com
- shim-install : support simple MD RAID1 target devices (FATE#314829)
-------------------------------------------------------------------
Wed May 4 10:40:52 UTC 2016 - agraf@suse.com
- Add shim-fix-aarch64.patch to fix compilation on AArch64 (bsc#978438)
-------------------------------------------------------------------
Wed Mar 9 07:15:52 UTC 2016 - mchang@suse.com
- shim-install : fix typing ESC can escape to parent config which is
in command mode and cannot return back (bsc#966701)
- shim-install : fix no which command for JeOS (bsc#968264)
-------------------------------------------------------------------
Thu Dec 3 10:26:14 UTC 2015 - jsegitz@novell.com
- acquired updated signature from Microsoft
-------------------------------------------------------------------
Mon Nov 9 08:22:43 UTC 2015 - glin@suse.com
- Add shim-bsc950569-fix-cryptlib-va-functions.patch to fix the
definition of va functions to avoid the potential crash
(bsc#950569)
- Update shim-opensuse-cert-prompt.patch to avoid setting NULL to
MokListRT (bsc#950801)
- Drop shim-fix-mokmanager-sections.patch as we are using the
newer binutils now
- Refresh shim-change-debug-file-path.patch
-------------------------------------------------------------------
Thu Oct 8 06:49:43 UTC 2015 - jsegitz@novell.com
- acquired updated signature from Microsoft
-------------------------------------------------------------------
Tue Sep 15 05:03:10 UTC 2015 - mchang@suse.com
- shim-install : set default GRUB_DISTRIBUTOR from /etc/os-release
if it is empty or not set by user (bsc#942519)
-------------------------------------------------------------------
Thu Jul 16 06:49:01 UTC 2015 - glin@suse.com
- Add shim-update-openssl-1.0.2d.patch to update openssl to 1.0.2d
- Refresh shim-gcc5.patch and add it back since we really need it
- Add shim-change-debug-file-path.patch to change the debug file
path in shim.efi
+ also add the debuginfo and debugsource subpackages
- Drop shim-fix-gnu-efi-30w.patch which is not necessary anymore
-------------------------------------------------------------------
Mon Jul 6 09:06:02 UTC 2015 - glin@suse.com
- Update to 0.9
- Refresh patches
+ shim-fix-gnu-efi-30w.patch
+ shim-fix-mokmanager-sections.patch
+ shim-opensuse-cert-prompt.patch
- Drop upstreamed patches
+ shim-bsc920515-fix-fallback-buffer-length.patch
+ shim-mokx-support.patch
+ shim-update-cryptlib.patch
- Drop shim-bsc919675-uninstall-shim-protocols.patch since
upstream fixed the bug in another way.
- Drop shim-gcc5.patch which was fixed in another way
-------------------------------------------------------------------
Wed Apr 8 07:10:39 UTC 2015 - glin@suse.com
- Fix tags in the spec file
-------------------------------------------------------------------
Tue Apr 7 07:42:06 UTC 2015 - glin@suse.com
- Add shim-update-cryptlib.patch to update Cryptlib to r16559 and
openssl to 0.9.8zf
- Add shim-bsc919675-uninstall-shim-protocols.patch to uninstall
the shim protocols at Exit (bsc#919675)
- Add shim-bsc920515-fix-fallback-buffer-length.patch to adjust
the buffer size for the boot options (bsc#920515)
- Refresh shim-opensuse-cert-prompt.patch
-------------------------------------------------------------------
Thu Apr 2 16:31:28 UTC 2015 - crrodriguez@opensuse.org
- shim-gcc5.patch: shim needs -std=gnu89 to build with GCC5
-------------------------------------------------------------------
Tue Feb 17 06:02:34 UTC 2015 - mchang@suse.com
- shim-install : fix cryptodisk installation (boo#917427)
-------------------------------------------------------------------
Tue Nov 11 04:26:00 UTC 2014 - glin@suse.com
- Add shim-fix-mokmanager-sections.patch to fix the objcopy
parameters for the EFI files
-------------------------------------------------------------------
Tue Oct 28 04:00:51 UTC 2014 - glin@suse.com
- Update to 0.8
- Add shim-fix-gnu-efi-30w.patch to adapt the change in
gnu-efi-3.0w
- Merge shim-signed-unsigned-compares.patch,
shim-mokmanager-support-sha-family.patch and
shim-bnc863205-mokmanager-fix-hash-delete.patch into
shim-mokx-support.patch
- Refresh shim-opensuse-cert-prompt.patch
- Drop upstreamed patches: shim-update-openssl-0.9.8zb.patch,
bug-889332_shim-overflow.patch, and bug-889332_shim-mok-oob.patch
- Enable aarch64
-------------------------------------------------------------------
Mon Oct 13 13:09:14 UTC 2014 - jsegitz@novell.com
- Fixed buffer overflow and OOB access in shim trusted code path
(bnc#889332, CVE-2014-3675, CVE-2014-3676, CVE-2014-3677)
* added bug-889332_shim-mok-oob.patch, bug-889332_shim-overflow.patch
- Added new certificate by Microsoft
-------------------------------------------------------------------
Wed Sep 3 12:32:25 UTC 2014 - lnussel@suse.de
- re-introduce build failure if shim_enforce_ms_signature is defined. That way
a project like openSUSE:Factory can decide whether or not shim needs a valid
MS signature.
-------------------------------------------------------------------
Tue Aug 19 04:38:36 UTC 2014 - glin@suse.com
- Add shim-update-openssl-0.9.8zb.patch to update openssl to
0.9.8zb
-------------------------------------------------------------------
Tue Aug 12 14:19:36 UTC 2014 - jsegitz@suse.com
- updated shim to new version (OpenSSL 0.9.8za) and requested a new
certificate from Microsoft. Removed
* shim-allow-fallback-use-system-loadimage.patch
* shim-bnc872503-check-key-encoding.patch
* shim-bnc877003-fetch-from-the-same-device.patch
* shim-correct-user_insecure-usage.patch
* shim-fallback-avoid-duplicate-bootorder.patch
* shim-fallback-improve-entries-creation.patch
* shim-fix-dhcpv4-path-generation.patch
* shim-fix-uninitialized-variable.patch
* shim-fix-verify-mok.patch
* shim-get-variable-check.patch
* shim-improve-error-messages.patch
* shim-mokmanager-delete-bs-var-right.patch
* shim-mokmanager-handle-keystroke-error.patch
* shim-remove-unused-variables.patch
since they're included in upstream and rebased the remaining onces.
Added shim-signed-unsigned-compares.patch to fix some compiler
warnings
-------------------------------------------------------------------
Tue Aug 12 09:18:42 UTC 2014 - glin@suse.com
- Keep shim-devel.efi for the devel project
-------------------------------------------------------------------
Fri Aug 8 11:18:36 UTC 2014 - lnussel@suse.de
- don't fail the build if the UEFI signing service signature can't
be attached anymore. This way shim can still pass through staging
projects. We will verify the correct signature for release builds
using openQA instead.
-------------------------------------------------------------------
Mon Aug 4 07:53:22 UTC 2014 - mchang@suse.com
- shim-install: fix GRUB shows broken letters at boot by calling
grub2-install to initialize /boot/grub2 directory with files
needed by grub.cfg (bnc#889765)
-------------------------------------------------------------------
Wed May 28 04:13:33 UTC 2014 - glin@suse.com
- Add shim-remove-unused-variables.patch to remove the unused
variables
- Add shim-bnc872503-check-key-encoding.patch to check the encoding
of the keys (bnc#872503)
- Add shim-bnc877003-fetch-from-the-same-device.patch to fetch the
netboot image from the same device (bnc#877003)
- Refresh shim-opensuse-cert-prompt.patch
-------------------------------------------------------------------
Wed May 14 09:39:02 UTC 2014 - glin@suse.com
- Use --reinit instead of --refresh in %post to update the files
in /boot
-------------------------------------------------------------------
Tue Apr 29 07:38:11 UTC 2014 - mchang@suse.com
- shim-install: fix boot partition and rollback support kluge
(bnc#875385)
-------------------------------------------------------------------
Thu Apr 10 08:20:20 UTC 2014 - glin@suse.com
- Replace shim-mokmanager-support-sha1.patch with
shim-mokmanager-support-sha-family.patch to support the SHA
family
-------------------------------------------------------------------
Mon Apr 7 09:32:21 UTC 2014 - glin@suse.com
- Add shim-mokmanager-support-sha1.patch to support SHA1 hashes in
MOK
-------------------------------------------------------------------
Mon Mar 31 11:57:13 UTC 2014 - mchang@suse.com
- snapper rollback support (fate#317062)
- refresh shim-install
-------------------------------------------------------------------
Thu Mar 13 02:32:15 UTC 2014 - glin@suse.com
- Insert the right signature (bnc#867974)
-------------------------------------------------------------------
Mon Mar 10 07:56:44 UTC 2014 - glin@suse.com
- Add shim-fix-uninitialized-variable.patch to fix the use of
uninitialzed variables in lib
-------------------------------------------------------------------
Fri Mar 7 09:09:12 UTC 2014 - glin@suse.com
- Add shim-mokmanager-delete-bs-var-right.patch to delete the BS+NV
variables the right way
- Update shim-opensuse-cert-prompt.patch to delete openSUSE_Verify
correctly
-------------------------------------------------------------------
Thu Mar 6 07:37:57 UTC 2014 - glin@suse.com
- Add shim-fallback-avoid-duplicate-bootorder.patch to fix the
duplicate entries in BootOrder
- Add shim-allow-fallback-use-system-loadimage.patch to handle the
shim protocol properly to keep only one protocol entity
- Refresh shim-opensuse-cert-prompt.patch
-------------------------------------------------------------------
Thu Mar 6 03:53:49 UTC 2014 - mchang@suse.com
- shim-install: fix the $prefix to use grub2-mkrelpath for paths
on btrfs subvolume (bnc#866690).
-------------------------------------------------------------------
Tue Mar 4 04:19:05 UTC 2014 - glin@suse.com
- FATE#315002: Update shim-install to install shim.efi as the EFI
default bootloader when none exists in \EFI\boot.
-------------------------------------------------------------------
Thu Feb 27 09:46:49 UTC 2014 - fcrozat@suse.com
- Update signature-sles.asc: shim signed by UEFI signing service,
based on code from "Thu Feb 20 11:57:01 UTC 2014"
-------------------------------------------------------------------
Fri Feb 21 08:45:46 UTC 2014 - glin@suse.com
- Add shim-opensuse-cert-prompt.patch to show the prompt to ask
whether the user trusts the openSUSE certificate or not
-------------------------------------------------------------------
Thu Feb 20 11:57:01 UTC 2014 - lnussel@suse.de
- allow package to carry multiple signatures
- check correct certificate is embedded
-------------------------------------------------------------------
Thu Feb 20 10:06:47 UTC 2014 - lnussel@suse.de
- always clean up generated files that embed certificates
(shim_cert.h shim.cer shim.crt) to make sure next build loop
rebuilds them properly
-------------------------------------------------------------------
Mon Feb 17 09:58:56 UTC 2014 - glin@suse.com
- Add shim-bnc863205-mokmanager-fix-hash-delete.patch to fix the
hash deletion operation to avoid ruining the whole list
(bnc#863205)
-------------------------------------------------------------------
Tue Feb 11 06:30:02 UTC 2014 - glin@suse.com
- Update shim-mokx-support.patch to support the resetting of MOK
blacklist
- Add shim-get-variable-check.patch to fix the variable checking
in get_variable_attr
- Add shim-fallback-improve-entries-creation.patch to improve the
boot entry pathes and avoid generating the boot entries that
are already there
- Update SUSE certificate
- Update attach_signature.sh, show_hash.sh, strip_signature.sh,
extract_signature.sh and show_signatures.sh to remove the
creation of the temporary nss database
- Add shim-only-os-name.patch: remove the kernel version of the
build server
- Match the the prefix of the project name properly by escaping the
percent sign.
-------------------------------------------------------------------
Wed Jan 22 13:45:44 UTC 2014 - lnussel@suse.de
- enable signature assertion also in SUSE: hierarchy
-------------------------------------------------------------------
Fri Dec 6 06:44:43 UTC 2013 - glin@suse.com
- Add shim-mokmanager-handle-keystroke-error.patch to handle the
error status from ReadKeyStroke to avoid unexpected keys
-------------------------------------------------------------------
Thu Dec 5 02:05:13 UTC 2013 - glin@suse.com
- Update to 0.7
- Add upstream patches:
+ shim-fix-verify-mok.patch
+ shim-improve-error-messages.patch
+ shim-correct-user_insecure-usage.patch
+ shim-fix-dhcpv4-path-generation.patch
- Add shim-mokx-support.patch to support the MOK blacklist
(Fate#316531)
- Drop upstreamed patches
+ shim-fix-pointer-casting.patch
+ shim-merge-lf-loader-code.patch
+ shim-fix-simple-file-selector.patch
+ shim-mokmanager-support-crypt-hash-method.patch
+ shim-bnc804631-fix-broken-bootpath.patch
+ shim-bnc798043-no-doulbe-separators.patch
+ shim-bnc807760-change-pxe-2nd-loader-name.patch
+ shim-bnc808106-correct-certcount.patch
+ shim-mokmanager-ui-revamp.patch
+ shim-netboot-fixes.patch
+ shim-mokmanager-disable-gfx-console.patch
- Drop shim-suse-build.patch: it's not necessary anymore
- Drop shim-bnc841426-silence-shim-protocols.patch: shim is not
verbose by default
-------------------------------------------------------------------
Thu Oct 31 09:11:18 UTC 2013 - fcrozat@suse.com
- Update microsoft.asc: shim signed by UEFI signing service, based
on code from "Tue Oct 1 04:29:29 UTC 2013".
-------------------------------------------------------------------
Tue Oct 1 04:29:29 UTC 2013 - glin@suse.com
- Add shim-netboot-fixes.patch to include upstream netboot fixes
- Add shim-mokmanager-disable-gfx-console.patch to disable the
graphics console to avoid system hang on some machines
- Add shim-bnc841426-silence-shim-protocols.patch to silence the
shim protocols (bnc#841426)
-------------------------------------------------------------------
Wed Sep 25 07:17:54 UTC 2013 - glin@suse.com
- Create boot.csv in ESP for fallback.efi to restore the boot entry
-------------------------------------------------------------------
Tue Sep 17 10:53:50 CEST 2013 - fcrozat@suse.com
- Update microsoft.asc: shim signed by UEFI signing service, based
on code from "Fri Sep 6 13:57:36 UTC 2013".
- Improve extract_signature.sh to work on current path.
-------------------------------------------------------------------
Fri Sep 6 13:57:36 UTC 2013 - lnussel@suse.de
- set timestamp of PE file to time of the binary the signature was
made for.
- make sure cert.o get's rebuilt for each target
-------------------------------------------------------------------
Fri Sep 6 11:48:14 CEST 2013 - fcrozat@suse.com
- Update microsoft.asc: shim signed by UEFI signing service, based
on code from "Wed Aug 28 15:54:38 UTC 2013"
-------------------------------------------------------------------
Wed Aug 28 15:54:38 UTC 2013 - lnussel@suse.de
- always build a shim that embeds the distro's certificate (e.g.
shim-opensuse.efi). If the package is built in the devel project
additionally shim-devel.efi is created. That allows us to either
load grub2/kernel signed by the distro or signed by the devel
project, depending on use case. Also shim-$distro.efi from the
devel project can be used to request additional signatures.
-------------------------------------------------------------------
Wed Aug 28 07:16:51 UTC 2013 - lnussel@suse.de
- also include old openSUSE 4096 bit certificate to be able to still
boot kernels signed with that key.
- add show_signatures script
-------------------------------------------------------------------
Tue Aug 27 06:41:03 UTC 2013 - lnussel@suse.de
- replace the 4096 bit openSUSE UEFI CA certificate with new a
standard compliant 2048 bit one.
-------------------------------------------------------------------
Tue Aug 20 11:48:25 UTC 2013 - lnussel@suse.de
- fix shell syntax error
-------------------------------------------------------------------
Wed Aug 7 15:51:36 UTC 2013 - lnussel@suse.de
- don't include binary in the sources. Instead package the raw
signature and attach it during build (bnc#813448).
-------------------------------------------------------------------
Tue Jul 30 07:36:28 UTC 2013 - glin@suse.com
- Update shim-mokmanager-ui-revamp.patch to include fixes for
MokManager
+ reboot the system after clearing MOK password
+ fetch more info from X509 name
+ check the suffix of the key file
-------------------------------------------------------------------
Tue Jul 23 03:55:05 UTC 2013 - glin@suse.com
- Update to 0.4
- Rebase patches
+ shim-suse-build.patch
+ shim-mokmanager-support-crypt-hash-method.patch
+ shim-bnc804631-fix-broken-bootpath.patch
+ shim-bnc798043-no-doulbe-separators.patch
+ shim-bnc807760-change-pxe-2nd-loader-name.patch
+ shim-bnc808106-correct-certcount.patch
+ shim-mokmanager-ui-revamp.patch
- Add patches
+ shim-merge-lf-loader-code.patch: merge the Linux Foundation
loader UI code
+ shim-fix-pointer-casting.patch: fix a casting issue and the
size of an empty vendor cert
+ shim-fix-simple-file-selector.patch: fix the buffer allocation
in the simple file selector
- Remove upstreamed patches
+ shim-support-mok-delete.patch
+ shim-reboot-after-changes.patch
+ shim-clear-queued-key.patch
+ shim-local-key-sign-mokmanager.patch
+ shim-get-2nd-stage-loader.patch
+ shim-fix-loadoptions.patch
- Remove unused patch: shim-mokmanager-new-pw-hash.patch and
shim-keep-unsigned-mokmanager.patch
- Install the vendor certificate to /etc/uefi/certs
-------------------------------------------------------------------
Wed May 8 06:40:12 UTC 2013 - glin@suse.com
- Add shim-mokmanager-ui-revamp.patch to update the MokManager UI
-------------------------------------------------------------------
Wed Apr 3 03:54:22 UTC 2013 - glin@suse.com
- Call update-bootloader in %post to update *.efi in \efi\opensuse
(bnc#813079)
-------------------------------------------------------------------
Fri Mar 8 06:53:47 UTC 2013 - glin@suse.com
- Add shim-bnc807760-change-pxe-2nd-loader-name.patch to change the
PXE 2nd stage loader name (bnc#807760)
- Add shim-bnc808106-correct-certcount.patch to correct the
certificate count of the signature list (bnc#808106)
-------------------------------------------------------------------
Fri Mar 1 10:07:55 UTC 2013 - glin@suse.com
- Add shim-bnc798043-no-doulbe-separators.patch to remove double
seperators from the bootpath (bnc#798043#c4)
-------------------------------------------------------------------
Thu Feb 28 08:57:48 UTC 2013 - lnussel@suse.de
- sign shim also with openSUSE certificate
-------------------------------------------------------------------
Wed Feb 27 15:52:53 CET 2013 - mls@suse.de
- identify project, export certificate as DER file
- don't create an unused extra keypair
-------------------------------------------------------------------
Thu Feb 21 10:08:12 UTC 2013 - glin@suse.com
- Add shim-bnc804631-fix-broken-bootpath.patch to fix the broken
bootpath generated in generate_path(). (bnc#804631)
-------------------------------------------------------------------
Mon Feb 11 12:15:25 UTC 2013 - fcrozat@suse.com
- Update with shim signed by UEFI signing service, based on code
from "Thu Feb 7 06:56:19 UTC 2013".
-------------------------------------------------------------------
Thu Feb 7 13:54:06 UTC 2013 - lnussel@suse.de
- prepare for having a signed shim from the UEFI signing service
-------------------------------------------------------------------
Thu Feb 7 06:56:19 UTC 2013 - glin@suse.com
- Sign shim-opensuse.efi and MokManager.efi with the openSUSE cert
- Add shim-keep-unsigned-mokmanager.patch to keep the unsigned
MokManager and sign it later.
-------------------------------------------------------------------
Wed Feb 6 06:35:45 UTC 2013 - mchang@suse.com
- Add shim-install utility
- Add Recommends to grub2-efi
-------------------------------------------------------------------
Wed Jan 30 09:00:31 UTC 2013 - glin@suse.com
- Add shim-mokmanager-support-crypt-hash-method.patch to support
password hash from /etc/shadow (FATE#314506)
-------------------------------------------------------------------
Tue Jan 29 03:20:48 UTC 2013 - glin@suse.com
- Embed openSUSE-UEFI-CA-Certificate.crt in shim
- Rename shim-unsigned.efi to shim-opensuse.efi.
-------------------------------------------------------------------
Fri Jan 18 10:06:13 UTC 2013 - glin@suse.com
- Update shim-mokmanager-new-pw-hash.patch to extend the password
hash format
- Rename shim.efi as shim-unsigned.efi
-------------------------------------------------------------------
Wed Jan 16 08:01:55 UTC 2013 - glin@suse.com
- Merge patches for FATE#314506
+ Add shim-support-mok-delete.patch to add support for deleting
specific keys
+ Add shim-mokmanager-new-pw-hash.patch to support the new
password hash.
- Drop shim-correct-mok-size.patch which is included in
shim-support-mok-delete.patch
- Merge shim-remove-debug-code.patch and
shim-local-sign-mokmanager.patch into
shim-local-key-sign-mokmanager.patch
- Install COPYRIGHT
-------------------------------------------------------------------
Tue Jan 15 03:17:53 UTC 2013 - glin@suse.com
- Add shim-fix-loadoptions.patch to adopt the UEFI shell style
LoadOptions (bnc#798043)
- Drop shim-check-pk-kek.patch since upstream rejected the patch
due to violation of SPEC.
- Install EFI binaries to /usr/lib64/efi
-------------------------------------------------------------------
Wed Dec 26 07:05:02 UTC 2012 - glin@suse.com
- Update shim-reboot-after-changes.patch to avoid rebooting the
system after enrolling keys/hashes from the file system
- Add shim-correct-mok-size.patch to correct the size of MOK
- Add shim-clear-queued-key.patch to clear the queued key and show
the menu properly
-------------------------------------------------------------------
Wed Dec 12 15:16:18 UTC 2012 - fcrozat@suse.com
- Remove shim-rpmlintrc, it wasn't fixing the error, hide error
stdout to prevent post build check to get triggered by cast
warnings in openSSL code
- Add shim-remove-debug-code.patch: remove debug code
-------------------------------------------------------------------
Wed Dec 12 04:01:52 UTC 2012 - glin@suse.com
- Add shim-rpmlintrc to filter 64bit portability errors
-------------------------------------------------------------------
Tue Dec 11 07:36:32 UTC 2012 - glin@suse.com
- Add shim-local-sign-mokmanager.patch to create a local certicate
to sign MokManager
- Add shim-get-2nd-stage-loader.patch to get the second stage
loader path from the load options
- Add shim-check-pk-kek.patch to verify EFI images with PK and KEK
- Add shim-reboot-after-changes.patch to reboot the system after
enrolling or erasing keys
- Install the EFI images to /usr/lib64/shim instead of the EFI
partition
- Update the mail address of the author
-------------------------------------------------------------------
Fri Nov 2 08:19:37 UTC 2012 - glin@suse.com
- Add new package shim 0.2 (FATE#314484)
+ It's in fact git 2fd180a92 since there is no tag for 0.2