SLFO-pool/transactional-update
SHA256
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
main
transactional-update/transactional-update.changes

1278 lines
50 KiB
Plaintext
Raw Permalink Blame History

-------------------------------------------------------------------
Tue May 7 14:25:07 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Version 4.6.8
- tukit: Properly handle overlay syncing failures: If the system
would not be rebooted and several snapshots accumulated in the
meantime, it was possible that the previous base snapshot -
required for /etc syncing - was deleted already. In that case
changes in /etc might have been reset.
[gh#openSUSE/transactional-update#116]
[gh#kube-hetzner/terraform-hcloud-kube-hetzner#1287]
- soft-reboot: Log requested reboot type
- soft-reboot: Don't force hard reboot on version change only
-------------------------------------------------------------------
Tue Apr 30 13:09:04 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Version 4.6.7
- Add support for snapper 0.11.0; also significantly decreases
cleanup time [boo#1223504]
-------------------------------------------------------------------
Thu Apr 18 14:53:17 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Version 4.6.6
- soft-reboot: Fix inverted logic of soft-reboot detection
- soft-reboot: Don't use D-Bus for snapper call - it may be
shutting down already
- soft-reboot: Remove unused variable
- doc: Document configuration file snippets for tukit.conf
- Remove script to disable soft-reboot support - this is the
default for now anyway
-------------------------------------------------------------------
Fri Apr 12 15:36:13 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Version 4.6.5
- Rework soft-reboot support introduced in 4.6.0:
- On transactional systems with systemd 254 the system could
hang with with a soft-reboot, as /var and /etc have to be
mounted in /run/nextroot explicitly. As a soft-reboot can
also be triggered by an admin the mounting of the
corresponding mount points was moved to a systemd service to
be independent of t-u itself.
- Support for systemd 255
- Don't decrease reboot level on multiple commands
- Various other bugfixes
- soft-reboot support is disabled by default now to gather more feedback
- libtukit: Fix kexec reboot method to boot kernel / initrd of next snapshot
- tukit: Don't clone lock file handle on exec [boo#1222411]
- t-u: Always use zypper of installed system [bsc#1221346]
- t-u: Remove remaining telemetrics references
- Add prepare-nextroot-for-softreboot service
- Add (empty) %check section
-------------------------------------------------------------------
Tue Mar 12 17:12:33 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Disable soft-reboot support for now as long as it isn't working
reliably
- Move tukit.conf to correct package
-------------------------------------------------------------------
Mon Mar 4 14:55:53 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Version 4.6.0
- tukit / t-u: Implement support for systemd soft-reboot, but
needs package manager support (provided by zypp-boot-plugin on
openSUSE) to determine which kind of reboot is required; the
minimally required reboot method (soft-reboot, kexec, full
reboot) will be used automatically if enabled (see tukit.conf).
This deprecates the "kexec" reboot method in favor of automatic
selection.
- tukit: Determine D-Bus availability via system socket instead
of brute force
- tukit: Don't ignore return status of snapper - plugins can
return an error code now where tukit has to fail [gh##118] /
[poo#127169]
- tukit: Remove BTRFS dependencies in snapper backend, user
snapper for for everything directly. In theory this should
support further file systems such as bcachefs if they follow
the same layout (untested).
- t-u: Add safety net before deleting overlays [boo#1217416]
- t-u: Remove telemetry support, the required packages haven't
been in the repository for quite some time as they were
abandoned upstream.
- doc: Document option to use names in BINDDIRS array
- doc: Mention tukit.conf in t-u man page
- doc: Link Reboot.hpp as an officially supported API on the
main page
- Code cleanup
-------------------------------------------------------------------
Thu Jan 18 16:19:41 UTC 2024 - Ignaz Forster <iforster@suse.com>
- Use "up" instead of "dup" by default on ALP [bsc#1218861]
-------------------------------------------------------------------
Mon Nov 20 17:12:20 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.5.0
- libtukit: Use permissions of real /etc when creating overlay
[bsc#1215878]
- libtukit, tukit: Support "rollback" via library now
- tukitd: Implement Snapshot delete and rollback methods
- tukit: Check for missing arguments with "close" and "abort"
commands
- t-u: Warn user when using "kdump" if it isn't configured to
avoid confusion with "setup-kdump" [boo#1215725]
- t-u: Abort if mkdumprd run is not successful
- t-u: Use defaut from config file if t-u is called without
arguments [gh#openSUSE/transactional-update#101]
- Improved README.md [gh#openSUSE/transactional-update#59] and
API docs
- Code cleanup
-------------------------------------------------------------------
Mon Sep 11 13:55:40 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.4.0
- t-u: Introduce setup-fips command [jsc#SMO-194]
- libtukit: Always set a cleanup algorithm for snapshots - when
using API, D-Bus interface or tukit the snapshots will be
automatically cleaned up by snapper after some time now; in the
past only snapshots created by the transactional-update shell
script would be cleanup after, and only after a `t-u cleanup`
run. [gh#openSUSE/transactional-update#62]
- tukit: enable kexec's syscall detection feature
- tukit: Don't throw exceptions from the child process after fork
- tukitd: Rename service file to org.opensuse.tukit.service
- tukitd: Allow querying DBus Properties [boo#1214707]
- t-u: Add support for fully written-out update commands
- t-u: Improve detection of existing kernel parameters
-------------------------------------------------------------------
Wed Jun 28 15:01:34 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.3.0
- Replace custom tu-rebuild-kdump-initrd with call to mkdumprd
[gh#openSUSE/transactional-update#107].
- Add support for libmount 2.39. The behaviour change was not
intended and will be changed in 2.39.1 (see
[gh#util-linux/util-linux#2326], but it was easy to fix it
anyway.
- Honor LIBMOUNT_DEBUG variable for additional output.
-------------------------------------------------------------------
Mon May 8 17:38:24 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.2.1
- Implement "apply" command to switch into new snapshot directly
[jsc#PED-3912]
- Use new snapper functionality to set default snapshot - this
makes it possible to execute hooks as requested in
[poo#127160], [gh#openSUSE/transactional-update#85] and
[gh#openSUSE/transactional-update#105].
- Don't hardcode GRUB2 [gh#openSUSE/transactional-update#100] /
[poo#127154]
- Fix cleanup handler
- Fix unmounting temporary mounts
- Prevent loosing track of snapshots in certain rollback
scenarios - these would not be marked for deletion otherwise
- Document "notify" reboot method
- Minimal required snapper version is 0.8.10 now, for the new
snapper functionality there is a backwards compatibility layer.
- Conflict with health-checker < 1.8 - the "good" snapshot
detection of GRUB cannot rely on transactional-update any more
due to the new apply command
- Depend on usrmerge for apply command
-------------------------------------------------------------------
Thu Mar 23 11:52:21 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.1.5
- Add support for configuration file snippets
-------------------------------------------------------------------
Fri Mar 10 14:05:37 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.1.4
- Workaround for broken Tumbleweed package libfdisk1
-------------------------------------------------------------------
Wed Feb 8 15:14:26 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.1.3
- Suppress SELinux relabelling output in quiet mode
- Documentation readability improvements
-------------------------------------------------------------------
Mon Jan 23 13:54:11 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.1.2
- Don't try to mount user mounts if they don't exist [boo#1207366]
-------------------------------------------------------------------
Wed Jan 18 16:56:16 UTC 2023 - Ignaz Forster <iforster@suse.com>
- Version 4.1.1
- Mount user specific binddirs last: Prevously the internal mounts would
potentially overwrite user bind mounts [boo#1205011]
- selinux: Relabel shadowed /var files during update to make sure they
don't interfere with the update [boo#1205937]
- Clean up /var/lib/overlay more aggressively [boo#1206947]
- tukit: Merge /etc overlay into parent if --discard is used together
with --continue - previously the files were incorrectly always merged
with the currently running system
- status: do not execute the status command if experimental
- Don't delete created mount point dirs any more
- Small code optimizations
-------------------------------------------------------------------
Fri Sep 30 12:39:17 UTC 2022 - Ignaz Forster <iforster@suse.com>
- Version 4.1.0
- t-u: Add a "setup-kdump" command; implements [jsc#PED-1441]
- Export TRANSACTIONAL_UPDATE_ROOT (the path to the snapshot) in
the update environment; implements [jsc#PED-1078]
- Add support for "notify" reboot method for desktop use
[gh#openSUSE/transactional-update#93]
- Fix kdump initrd recreation detection; the check was performed in the
active snapshot instead of the target snapshot
- Document register command [bsc#1202900]
- Avoid unnecessary snapshots for register command [bsc#1202901]
- Various optimizations for register command
- Remove bogus error message when triggering reboot
- Rework /etc overlay documentation in "The Transactional Update Guide"
- Fix incorrect manpage formatting
- Remove leftover "salt" reboot method in configuration example file
- Replace deprecated std::mem_fn with lambdas
-------------------------------------------------------------------
Thu Sep 1 14:03:58 UTC 2022 - Stefan Schubert <schubi@suse.com>
- Migration of logrotate configuration to /usr/etc: Saving user
changed configuration files in /etc and restoring them while
an RPM update.
-------------------------------------------------------------------
Mon Aug 22 15:14:24 UTC 2022 - Fabian Vogt <fvogt@suse.com>
- Version 4.0.1
- create_dirs_from_rpmdb: Just warn if no default SELinux context found
[gh#openSUSE/transactional-update#88], [bsc#1188215]
- create_dirs_from_rpmdb: Don't update the rpmdb cookie on failure
[gh#openSUSE/transactional-update#88]
- Handle directories owned by multiple packages
[gh#openSUSE/transactional-update#90], [bsc#1188215]
-------------------------------------------------------------------
Tue Aug 2 14:32:35 UTC 2022 - Ignaz Forster <iforster@suse.com>
- Version 4.0.0
- Last minute interface change: Changed "List" method of Snapshot D-Bus
interface to return a map of properties instead of a comma separated
list of strings; this will allow retrieving the snapshot properties
even if they contain a comma in their value [boo#1202147]
- Remove "Snapshot.hpp" as a public API for now - all public
functionality is part of SnapshotManager.hpp
- Add header file documentation for SnapshotManager.hpp
- Add method to delete snapshot
[gh#openSUSE/transactional-update#52]
- Allow setting description of snapshot
[gh#openSUSE/transactional-update#55]
- create_dirs_from_rpmdb: set SELinux file context of missing directories
[gh#openSUSE/transactional-update#84], [bsc#1197242]
- Fix broken logrotate due to typo in config file
[gh#openSUSE/transactional-update#87]
- create_dirs_from_rpmdb: Fix handling return code of create_dirs()
[gh#openSUSE/transactional-update#86]
- Fix broken "shell" prompt after selfupdate
- Add documented D-Bus interface definition files
- Add tukit_sm_get_current and tukit_sm_get_default to C interface
- Fixed typos
-------------------------------------------------------------------
Tue Jun 21 08:02:24 UTC 2022 - Stefan Schubert <schubi@suse.com>
- Moved logrotate files from user specific directory /etc/logrotate.d
to vendor specific directory /usr/etc/logrotate.d.
-------------------------------------------------------------------
Tue May 17 07:59:57 UTC 2022 - Ignaz Forster <iforster@suse.com>
- Version 4.0.0~rc4
- Fix building with GCC 12
- Fix stack overflow with very long commands / ids [bsc#1196149]
- Use separate mount namespace for chroot, allowing overwriting
the bind mounts from the update environment - this could have
lead to data loss of the bind mount previously
- Fix C error and exception handling for snapshots
-------------------------------------------------------------------
Tue May 3 10:21:35 UTC 2022 - Ignaz Forster <iforster@suse.com>
- Version 4.0.0~rc3
- Add Snapshot interface
- Reworked signal handling: All public signals are sent from the
main thread now, keeping the same sender for everything
- Implement D-Bus call "Execute" for Transactions
- Implement interface for listing Snapshots
- Implement Reboot interface
- Fix bug when using --continue on old snapshots
- Fix hypothetical integer overflow in snapshot list [bsc#1196826]
- Fix wrong sort order in status command
[gh#openSUSE/transactional-update#80]
-------------------------------------------------------------------
Sun Mar 6 17:46:14 UTC 2022 - Ignaz Forster <iforster@suse.com>
- Version 4.0.0~rc2
- Fix missing prompt in "shell" command [bsc#1196580]
- Add output of tukit commands to log file
- Fix compilation error with GCC12 [boo#1194876]
- Fixed (non-critical) security review comments [boo#1196149]
- Fixed selfupdate
- Code cleanup
-------------------------------------------------------------------
Fri Nov 22 18:05:54 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 4.0.0~rc1
This release is API, but not ABI compatible with previous releases;
existing applications will have to be recompiled against this new version.
Major features:
- Introduces a D-Bus service to access the libtukit API via the
org.opensuse.tukit.Transaction interface
- Introduces a C binding via libtukit.h.
Other changes:
- t-u: Rework --quiet handling to make sure no output is shown even in
error cases; this is necessary for automation, e.g. with Salt.
[gh#openSUSE/transactional-update#73]
- tukit: Allow storing command output into variable by introducing a new
optional parameter for "execute" and "callExt".
- Replace multiple and non-standalone occurenses of {} in "callExt"
argument.
- Split transactional-update.timer into transactional-update.timer
and transactional-update-cleanup.timer; the later will clean up
old snapshots even when the system does not do automatic updates.
- tukit: Remove legacy alias "setDiscard" for "setDiscardIfUnchanged".
- Throw exception if snapshot is not found.
- Fix various compiler warnings
- Update spec file:
- Include tukitd D-Bus daemon
- Only install one version of the library (as there are no breaking API
changes yet)
- Add %pre scriplets for systemd services
- Replace %systemd_postun scriptlets with %systemd_postun_with_restart
to satisfy rpmlint checks
- Add transactional-update log file as %ghost file
-------------------------------------------------------------------
Fri Nov 19 16:58:21 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.6.2
- Bind mount root file system snapshot on itself, this makes the
temporary directory in /tmp unnecessary; also fixes [boo#1188110]
to return the correct snapshot's working directory via API call.
- Use separate mount namespace for transactional-update; this should
fix several applications that fail to run if a mount point has the
'unbindable' mount flag set
-------------------------------------------------------------------
Wed Nov 10 14:55:06 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.6.1
- Fix rsyncing /etc into the running system with
--drop-if-no-change [bsc#1192242]
-------------------------------------------------------------------
Fri Oct 22 17:53:36 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.6.0
- Simplify mount hierarchy by just using a single slave bind
mount as the root of the update environment; this may avoid the
error messages of failed unmounts
May fix [boo#1191945]
-------------------------------------------------------------------
Tue Oct 12 09:42:57 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.7
Various fixes affecting Salt support:
- t-u: Don't squash stderr messages into stdout
- t-u: Correctly handle case when the snapshot has been deleted due to
using --drop-if-no-change: Don't show reboot messages and avoid an awk
error message [bsc#1191475]
- tukit: Make inotify handler less sensitive / ignore more directories
[bsc#1191475]
-------------------------------------------------------------------
Thu Sep 23 23:12:28 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.6
- tukit: Add S/390 bootloader support [bsc#1189807]
- t-u: support purge-kernels with t-u patch [bsc#1190788]
-------------------------------------------------------------------
Fri Sep 17 14:02:17 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.5
- t-u: Use tukit for SUSEConnect call [bsc#1190574]
Correctly registers repositories
-------------------------------------------------------------------
Sat Sep 11 21:21:09 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.4
- tukit: Fix resolved support [boo#1190383]
-------------------------------------------------------------------
Mon Sep 6 10:04:50 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.3
- t-u: Purge kernels as part of package operations
Required for live patching support [bsc#1189728]
-------------------------------------------------------------------
Mon Aug 30 17:17:29 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.2
- tukit: Fix overlay syncing errors with SELinux [bsc#1188648]
- Don't print message for `shell` with --quiet
[gh#openSUSE/transactional-update#69]
-------------------------------------------------------------------
Tue Aug 3 12:41:41 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.1
- t-u: Disable status file generation by default
The new experimental `status` command requires the availability of
/etc/YaST2/control.xml, which is not present on all systems. Hide the
creation of the corresponding status file behind a new EXPERIMENTAL_STATUS
option to try out this functionality.
- Increase library version
-------------------------------------------------------------------
Tue Aug 3 07:37:36 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Add tukit.conf to spec file
-------------------------------------------------------------------
Mon Aug 2 15:58:09 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.5.0
- Add alias setDiscardIfUnchanged for setDiscard. The old method name
wasn't really clear and will be removed if we should have an API break
in the future
- Replace mkinitrd with direct dracut call [boo#1186213]
- tukit: Add configuration file support (/etc/tukit.conf)
- Allow users to configure additional bind mounts (see /usr/etc/tukit.conf
for an example and limitations) [bsc#1188322]
- Add 'transactional-update status' call. This is a POC for obtaining a
hash of a system to verify its integrity. The functionality is still
experimental!
- Internal bugfixes / optimizations
-------------------------------------------------------------------
Sun Jun 13 23:18:28 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.4.0
- Apply SElinux context on /etc in transaction [boo#1185625], [boo#1185766]
[bsc#1186842], [boo#1186775]
- Implement inotify handling in C instead of Bash; this makes the
--drop-if-no-change option work on SLE Micro [bsc#1184529]
- Use `tukit call` for up, dup and patch to allow resuming an update after
zypper updated itself in the snapshot [bsc#1185226]
- Fix obsolete output type messages in initrd [boo#1177149]
- Make different base snapshot warning more visible [bsc#1185224]
-------------------------------------------------------------------
Thu Mar 25 22:13:59 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.3.0
- Add support for more package managers by bind mounting their directories
- Support snapshots without dedicated overlay [boo#1183539], [bsc#1183539]
- Link RPM database correctly with older zypper versions [boo#1183521]
- Don't discard manual changes in fstab [boo#1183856], [bsc#1192302]
-------------------------------------------------------------------
Fri Mar 12 13:45:09 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Revert inotify-tools dependency: The package is not available in
SLE. This will probably have to be implemented as a native C
version.
-------------------------------------------------------------------
Fri Mar 12 13:08:04 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.2.2
- Don't skip patches with rebootSuggested flag [bsc#1183442]
-------------------------------------------------------------------
Wed Mar 10 15:14:03 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.2.1
- t-u: Forward --quiet option to tukit
- Regression: Add /opt as bind mount into update environment
- Remove output indicators of the called command to not tamper
the result line
- Fix /etc syncing with --drop-if-no-change
-------------------------------------------------------------------
Wed Mar 10 12:40:56 UTC 2021 - Alberto Planas Dominguez <aplanas@suse.com>
- Requires inotify-tool to have --drop-if-no-change available
-------------------------------------------------------------------
Tue Mar 2 23:58:27 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.2.0
- tukit: Add new command 'callext' to execute an application while the
snapshot is mounted. '{}' as a parameter will be replaced with the path
of the bind mount.
- Fix --drop-if-no-change [boo#1182525]
- Check whether self-updated version is executable (e.g. on noexec /tmp)
[bsc#1173842]
- Fix overlay synchronisation with SELinux (again)
- Always overwrite supplemental files (e.g. for network configuration)
even if they exist in the snapshot already [boo#1182544]
- Improve logging and error messages
-------------------------------------------------------------------
Wed Feb 17 08:44:18 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.1.4
- SELinux: Fix syncing of SELinux attributes when using overlays
- SELinux: Tag the overlay directory itself (again)
-------------------------------------------------------------------
Mon Feb 15 13:10:39 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.1.3
- Fix overlay syncing on SELinux systems
- Fix resuming transactions where the parent does not exist any more
-------------------------------------------------------------------
Fri Feb 12 12:29:27 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.1.2
- libtukit: Report when application was terminated due to a signal, and
return the signal number as a return value. This will cause the
transaction to be aborted when called via `execute`.
- libtukit: Set PATH variable for internal commands to fixed value to
find the helper applications, as in some environments such as PolicyKit
PATH wouldn't be set.
- Fix compiler warnings
-------------------------------------------------------------------
Tue Feb 9 21:15:52 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.1.1
- Fix hang in tukit on aarch64 [bsc#1181844]
- Prevent deletion of snapshots when resuming a snapshot where no
transaction is open
- Make tukit work in non-dbus environments [boo#1181934]
-------------------------------------------------------------------
Tue Feb 2 13:53:20 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.1.0
- t-u: Support installing RPMs from the user's directory again
- Adapt selfupdate to new packaging
- Implement signal handling
- Remove empty text files
-------------------------------------------------------------------
Mon Feb 1 09:20:44 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Add libselinux build time dependency
- Remove RPM version check
-------------------------------------------------------------------
Mon Feb 1 08:36:36 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Fix libstdc++ filesystem ABI incompatibility by using newer gcc
version on old distributions. [boo#1181582]
-------------------------------------------------------------------
Thu Jan 28 14:25:53 UTC 2021 - Neal Gompa <ngompa13@gmail.com>
- Rework packaging based on Fedora packaging to separate all the
components to remove the intrinsic requirement for Zypper
-------------------------------------------------------------------
Wed Jan 27 10:13:53 UTC 2021 - Ignaz Forster <iforster@suse.com>
- Version 3.0.0
- This release changes the internal structure, but should be
identical to the previous release feature wise.
- Major parts of the previous Bash only application have been
rewritten in C++ with the goal to provide an API around
transactions; the transactional-update script is using that
new interface internally already, however the API should
be considered experimental for now - if you are interested to
use it, please notify us in
https://github.com/openSUSE/transactional-update/issues/52
- A new tool called "tukit" provides a C++ tool that can be
wrapped by scripts to leverage the functionality. Please
consider it experimental for now, the commands may still change.
- Bugfixes:
- Implement support for system offline update [boo#1180808]
- Add statistics files to update environment [boo#1173282]
-------------------------------------------------------------------
Mon Nov 9 08:30:54 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.38.3
- SELinux: Make synchronisation work for both pre-SELinux
snapshots and later snapshots; SELinux support should be ready
for most tasks now.
-------------------------------------------------------------------
Fri Oct 30 08:45:46 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.28.2
- SELinux: Exclude security.selinux attribute from rsyncing (again)
-------------------------------------------------------------------
Thu Oct 29 15:05:24 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.28.1
- SELinux: Fixed changing the wrong grub configuration file
- SELinux: Move /.autorelabel file to writeable location
-------------------------------------------------------------------
Thu Oct 22 12:20:38 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.28
- Add 'setup-selinux' command for easy setup of a SELinux system
- Allow complex commands for the 'run' command
- SELinux: Fix /etc / overlay labeling
-------------------------------------------------------------------
Wed Oct 14 09:32:15 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.27
- Add support for network systemd-resolvd network connections in t-u
environment
- Mount /var/lib/ca-certificates read-write to prevent SELinux error
- Prevent calling transactional-update from within transactional-update
-------------------------------------------------------------------
Sat Sep 26 14:50:12 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.26
- Fix broken sync for second snapshot [boo#1176989]
- Add new options to allow separate cleanup of snapshots and overlays
- Check for existence of inotifywait before using it
- Check that mount options don't exceed maximum length
-------------------------------------------------------------------
Mon Sep 21 16:17:12 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.25.1
- Fix inotify watcher setup
- Use log_{info,error} for more messages to avoid messing up Salt logs
-------------------------------------------------------------------
Mon Sep 21 14:09:41 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.25
- Reduce number of overlays:
Instead of using transparent overlays for all previous layers only add the
previous snapshot's overlay; this will greatly reduce the number of
overlays while still making sure that /etc changes in the running system
will be visible in the next snapshot
- When using --drop-if-no-change synchronize potential /etc changes with
running system
- Exclude all non-root-fs mounts from inotify watcher
-------------------------------------------------------------------
Wed Aug 12 10:06:11 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.24.1
- SELinux: adjust labels for etc, fstab and grub.cfg
-------------------------------------------------------------------
Thu Aug 6 08:32:11 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.24
- Add partial SELinux support
-------------------------------------------------------------------
Fri Jul 31 16:11:04 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.23
- Add "run" command to be able to execute a single command in a new snapshot
- Add "--drop-if-no-change" option to discard snapshots if no changes were
perfomed (BETA, required for Salt integration)
- Removed previous CaaSP Salt support (gh#openSUSE/transactional-update#33)
- Avoid "file not found" message on systems without /var subvol
-------------------------------------------------------------------
Thu Jul 23 13:17:47 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>
- Remove unused attr requires
- Change bc to file requires
-------------------------------------------------------------------
Tue Jun 23 15:39:12 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.22
- Use pkgconf to determine installation paths
- Enable SSL connections in update shell
[boo#1149131] & [boo#1133891] & [boo#1192078]
-------------------------------------------------------------------
Mon Apr 6 08:02:55 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Version 2.21.1
- Rework error messages on failing umount [boo#1168389]
-------------------------------------------------------------------
Mon Mar 30 12:09:34 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Update to version 2.21
- Use slave mounts for /proc, /sys & /dev
-------------------------------------------------------------------
Thu Mar 26 08:21:24 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Update to version 2.20.4
- Mount efivarfs on EFI systems to make sure the bootloader will be installed
correctly [boo#1162320]
- Fix removal of existing overlay directories
-------------------------------------------------------------------
Fri Mar 13 12:10:02 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Add dependencies to btrfsprogs, zypper and snapper - most of the
functionality is not usable if those applications are not
installed. [boo#1166502]
-------------------------------------------------------------------
Tue Mar 3 16:34:26 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Update to version 2.20.3
- Reintroduce compatibility with RPM < 4.15 for inclusion in
SLE / Leap 15.2
- Prepare for removal of /var/lib/alternatives [jsc#SLE-9101]
-------------------------------------------------------------------
Wed Feb 26 09:58:23 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Update to version 2.20.2
- Use full names for zypper options [bsc#1164543]
- Ignore /var/lib/rpm in shadowed file output
- Optimize create-dirs-from-rpmdb
-------------------------------------------------------------------
Tue Jan 7 10:52:39 UTC 2020 - Ignaz Forster <iforster@suse.com>
- Update to version 2.20.1
- Add missing documentation about --continue option
- Avoid error message about missing fstab file on first snapshot creation.
[boo#1160213]
-------------------------------------------------------------------
Fri Nov 8 10:27:10 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.20
- Add the option `--continue` to extend an existing snapshot. This can be
used to perform multiple operations before rebooting into the new state.
[gh#openSUSE/transactional-update#16]
- Make sure the dracut service to print warnings on /etc overlay conflicts
also runs in the pre-made images.
- Add "none" reboot method
- Remove conflicting overlay artifacts in case an existing overlay directory
will be reused
-------------------------------------------------------------------
Wed Sep 25 15:13:35 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.17
- Provide network in shell on systems where resolv.conf is pointing to /run
directly [boo#1151081]
- Print new snapshot number at the end
- Always mount /root subvolume when using shell command to preserve history
-------------------------------------------------------------------
Mon Sep 9 19:36:59 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.16
- Use default command if options, but no command was given [boo#1146116]
- Make sure only one process appears in `ps` output [boo#1111897]
- Move update check: If a new repository is added (and
ZYPPER_AUTO_IMPORT_KEYS is set) adding the new repository key won't fail
any more
- Avoid unnecessary snapshots / reboots by detecting zypper operations
without changes more reliably (e.g. when installing an already installed
package)
- Update the manpage accordingly
- Bugfixes:
- Ignore commented lines in fstab when checking for shadowed files
- Avoid warning when copying network config
- Remove Perl dependency
- Building documentation requires Python 3 now
-------------------------------------------------------------------
Wed Jun 5 15:15:09 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.15
- Move description of interactiveness [boo#1132438]
- Enable network during update [boo#1137890]
- Add compatibilty with new overlayfs versions [boo#1140057]
- Allow updates of the bootloader on EFI systems [boo#1139015]
- Add support for /boot/writable [boo#1138725]
-------------------------------------------------------------------
Mon Apr 29 12:20:51 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.14.2
- Prevent unnecessary error message on systems not installed with
YaST (e.g. KIWI)
-------------------------------------------------------------------
Wed Apr 17 08:37:18 CEST 2019 - kukuk@suse.de
- Add requires for bc, needed for some calculations
-------------------------------------------------------------------
Mon Mar 25 14:53:12 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.14.1
- Improve non-root fs changes checker based on feedback
- Disable snapper's zypper plugin during transactional-update run
- Allow parallel installation with snapper's zypper plugin (useful on
read-write systems).
-------------------------------------------------------------------
Fri Mar 15 10:45:52 UTC 2019 - Ignaz Forster <iforster@suse.com>
- Update to version 2.14
- Warn user if contents of /var have been changed during update
- Noteworthy: swapped position of upperdir and lowerdir in fstab for better
readability
- Major update to the transactional-update guide
-------------------------------------------------------------------
Mon Mar 4 10:40:21 CET 2019 - kukuk@suse.de
- Update to version 2.13.2
- add hooks for telemetrics
-------------------------------------------------------------------
Thu Feb 14 16:26:54 UTC 2019 - iforster@suse.com
- Update to version 2.13.1
- Bugfix: Clean up empty /etc snapshot directories again
- Use official release files from GitHub for building
-------------------------------------------------------------------
Thu Feb 14 12:14:47 UTC 2019 - iforster@suse.com
- Update to version 2.13
- Fix a serious data loss problem (deleting all files in /etc
overlays) in case /var/lib/overlay/etc is not part of any
snapshot any more.
- Avoid error message in case a system has no /etc/fstab.sys
-------------------------------------------------------------------
Mon Jan 28 19:05:42 UTC 2019 - iforster@suse.com
- Update to version 2.12
- Implements support for needs-restart (Fate#326451)
- Adds easy rollback to last known working snapshot by using "last"
as the snapshot number
- Migrate /etc/fstab.sys entires to /etc/fstab for systemd being
able to create mount units; this will prevent errors on unmount
- Remove implicit --no-allow-vendor-change - this option can be
configured in zypper's configuration file now
- Add support for mounting the /etc overlay file system as a systemd
unit in /etc/fstab on a read-only system (replacing /etc/fstab.sys
in the long run)
- Various bugfixes:
- Only remove /etc overlays on read-only root file systems
[boo#1122455]
- Disable "Persistent" flag in systemd timer unit to prevent
updates during or immediately after the boot phase
- Don't set global zypper options during migration - this is not
supported by the migration plugin
- Fix error handling when interrupting while rsync is running
- Filter out security.selinux attributes during rsync
-------------------------------------------------------------------
Sat Nov 17 09:06:44 UTC 2018 - Jan Engelhardt <jengelh@inai.de>
- Use noun phrase in summary.
-------------------------------------------------------------------
Mon Nov 12 14:27:24 UTC 2018 - iforster@suse.com
- Update to version 2.11
- Update man page to explain new /etc overlay handling
- Add special handling for migrating away from old overlay directory
- Read default update method for systemd service from config file
- Add package "transactional-update-zypp-config" to prevent accidental
transactional-update uninstallation on transactional systems
(boo#1111319)
- Use "up" for systemd service on non-rolling release distributions
(boo#1111321)
-------------------------------------------------------------------
Thu Oct 4 12:42:35 UTC 2018 - iforster@suse.com
- Update to version 2.10
- Introduce /etc overlays
- Each root file system snapshot now has a dedicated /etc overlay in
/var/lib/snapshots/<snapshot number>/etc
- Changes in older snapshots will be visible in newer snapshots (if
the file hasn't been changed in both snapshots), but not the other
way around; this makes it possible to roll back to a previous
snapshot even if the configuration is broken
- The /etc state of the oldest active snapshot will be synchronized
into the new snapshot to prevent ever growing overlays
- Removed creation of /etc backup snapshots
- Removed complex overlayfs cleanup handling during dracut early boot;
only thing left is to output a warning if files have been changed
in old and new overlay after snapshot creation
- Unused overlays will be removed during "cleanup" operation
- Add compatibility with snapper >= 0.7.0
- Correctly detect BTRFS ID when using multiple snapper configurations
- Fix disappearing prompt in "shell" command when application was updated
- Prevent accidental rollback on fast reboots (boo#1111786)
- Use zypper attribute packages-to-change if available (boo#1105992 &
boo#1097619)
- Add kexec as reboot alternative
- Added explicit --with-doc / --without-doc build configure opttions for
enforcing or excluding documentation build
- Removed precompiled documentation (boo#1088676)
- Added more dependency checks to configure script
- Small improvements to documentation
- Restored compatibility with older rsync versions not supporting the -x
filter
- Small bugfixes for cleanup in error situations
- Fix possible incorrect detection of snapshots numbers during cleanup
- Mention parent in snapshot description
- Add dependencies for documentation build (boo#1088676)
-------------------------------------------------------------------
Mon Aug 20 15:09:44 UTC 2018 - iforster@suse.com
- Update to version 2.6
- Add --interactive and --non-interactive options to change the default
interactivity for zypper calls. For previously non-interactive calls (e.g.
dup) these options makes it possible to pick the correct solution in case
of conflicts or make sure that a script will never be stuck at an input
prompt.
- Add kured reboot support
- Tries to clean up temporary files and mount points if transactional-update
quits unexpectedly
- Remove trancactional-update-helper (replaced by zypper options)
- Create /var/lib/zypp if not available (boo#1104452)
- Robustify parsing zypper output (boo#1105992)
- Various small fixes
- Changed permissions of systemd script again
-------------------------------------------------------------------
Fri Jun 15 12:05:24 UTC 2018 - iforster@suse.com
- Update to version 2.5
- Support for overlayfs attributes like trusted.overlay.opaque - this will
avoid disappearing configuration files on system updates
- Documentation update
- Only sync /etc if it's on an overlayfs mount
- Use correct locale for zypper - thus updating locale specific packages and
avoiding "empty" updates where transactional-update didn't see the change
- Add dependency to attr
- Fix permissions of systemd script
-------------------------------------------------------------------
Tue Jun 5 17:07:25 CEST 2018 - kukuk@suse.de
- Update to version 2.4
- Bug fix release
-------------------------------------------------------------------
Mon May 14 16:16:08 UTC 2018 - iforster@suse.com
- Update to version 2.3
- Reformat help text / synopsis
- More detailled output (use --quiet for less output)
- Log all error messages into log file
- Avoid potential lock file race condition on self update
- Accept package names with whitespace
- Don't wait for user input during self-update
- Fix broken error message output when creating new snapshot without reboot
- Fix erroneous mounting of stale grub mounts
-------------------------------------------------------------------
Wed May 2 08:39:18 UTC 2018 - iforster@suse.com
- Update to version 2.2
- Fix security issue in self update [boo#1091316]
- Create dirs in /var more reliably by sorting the list
- Rebuild initrd (needed since 2.0)
-------------------------------------------------------------------
Thu Apr 26 15:14:36 CEST 2018 - kukuk@suse.de
- Update to version 2.1
- Cleanup the code cleaning up /etc
-------------------------------------------------------------------
Tue Apr 24 14:23:41 CEST 2018 - kukuk@suse.de
- Update to version 2.0
- Create missing directories from rpm database during boot
- Merge /etc overlay with root subvolume during update
-------------------------------------------------------------------
Fri Apr 20 15:57:21 CEST 2018 - kukuk@suse.de
- Update to version 1.29
- Implement self-update
- Disable optical media on dup
- Ignore certain zypper return codes
-------------------------------------------------------------------
Tue Apr 3 08:51:33 UTC 2018 - rbrown@suse.com
- Add conflicts with snapper-zypp-plugin
-------------------------------------------------------------------
Sat Mar 17 19:48:44 UTC 2018 - rbrown@suse.com
- Require perl-HTML-Parser (needed since 1.26) [boo#1085764]
-------------------------------------------------------------------
Mon Mar 12 13:19:49 CET 2018 - kukuk@suse.de
- Update to version 1.28
- Adjust for latest grub2
-------------------------------------------------------------------
Tue Mar 6 13:32:38 CET 2018 - kukuk@suse.de
- Update to version 1.27
- Fallback to snapper without dbus support if dbus fails
- Add workaround for update-alternatives
- Add support for /usr/etc/transactional-update.conf
-------------------------------------------------------------------
Fri Feb 23 12:01:53 UTC 2018 - kukuk@suse.com
- Use %license instead of %doc [bsc#1082318]
-------------------------------------------------------------------
Wed Jan 31 16:14:14 CET 2018 - kukuk@suse.de
- Update to version 1.26
- Auto accept repo keys config option
- Detect broken snapshots after abort
- Ignore user deleted snapshots
- Include all error messages in main log file
- Add configuration file
- Correctly implement migration of major OS versions
- Default reboot strategy is configuration option
- Salt option is deprecated
-------------------------------------------------------------------
Tue Jan 9 11:42:20 CET 2018 - kukuk@suse.de
- Update to version 1.25
- preliminary SELinux support
- support for seperate /var subvolume
-------------------------------------------------------------------
Tue Dec 5 19:38:47 UTC 2017 - kukuk@suse.de
- Update to version 1.24
- Don't save unused snapshots if we may delete them again.
Partly fixes [bsc#1071038]
- Copy passwd, group and shadow to /usr/etc if modified
-------------------------------------------------------------------
Fri Nov 17 14:54:33 CET 2017 - kukuk@suse.de
- Update to version 1.23
- Fix re-registration in rollback case
- Fix problems with updating the grub2 bootloader
- Add support for migration of products with SCC/SMT
- Re-add support to re-write bootloader
[bsc#1068933]
-------------------------------------------------------------------
Tue Nov 7 16:34:28 CET 2017 - kukuk@suse.de
- Update to version 1.22
- Rewrite cleanup code to be more aggressive
-------------------------------------------------------------------
Fri Oct 27 13:52:56 CEST 2017 - kukuk@suse.de
- Update to version 1.21
- Reset salt grains even if no update was found
-------------------------------------------------------------------
Wed Sep 13 11:24:28 CEST 2017 - kukuk@suse.de
- Update to version 1.20
- Improve documentation
- Add pkg update option
-------------------------------------------------------------------
Fri Jun 30 09:58:51 CEST 2017 - kukuk@suse.de
- Update to version 1.19
- Add 'shell' option for debugging and testing
-------------------------------------------------------------------
Wed Jun 28 14:13:27 CEST 2017 - kukuk@suse.de
- Update to version 1.18
- Auto accept product license in non-interactive mode
-------------------------------------------------------------------
Tue Jun 27 09:12:58 CEST 2017 - kukuk@suse.de
- Update to version 1.17
- copy modified bootloader config into snapshot
- unit file cleanup, no change of behavior
-------------------------------------------------------------------
Mon Jun 26 14:21:38 CEST 2017 - kukuk@suse.de
- Update to version 1.16
- internal changes [bsc#1045942]
-------------------------------------------------------------------
Thu Jun 1 15:56:56 CEST 2017 - kukuk@suse.de
- Update to version 1.15
- Rename option ptf to pkg
- Add option to set salt grains
-------------------------------------------------------------------
Fri Apr 21 11:24:54 CEST 2017 - kukuk@suse.de
- Update to version 1.14
- Fix check of return values of commands in pipes [bsc#1034900]
-------------------------------------------------------------------
Tue Mar 21 10:35:17 CET 2017 - kukuk@suse.de
- Update to version 1.12
- minor bug fixes
-------------------------------------------------------------------
Thu Mar 2 13:20:36 CET 2017 - kukuk@suse.de
- Update to version 1.11
- use --no-allow-vendor-change with "zypper dup"
- update manual page
-------------------------------------------------------------------
Mon Feb 13 14:33:13 CET 2017 - kukuk@suse.de
- Update to version 1.10
- implement and document rollback option
-------------------------------------------------------------------
Tue Feb 7 08:04:50 CET 2017 - kukuk@suse.de
- Update to version 1.9
- fix umounting of special filesystems and subvolumes
- fix interactive installation of PTFs [bsc#1023026]
- fix dependencies of systemd service
-------------------------------------------------------------------
Wed Feb 1 17:51:32 CET 2017 - kukuk@suse.de
- Add Requires for lsof and fuser
-------------------------------------------------------------------
Wed Feb 1 14:50:37 CET 2017 - kukuk@suse.de
- Update to version 1.8
- fix references in html docu
- build kdump initrd if we build standard initrd, too
-------------------------------------------------------------------
Mon Jan 30 11:20:26 CET 2017 - kukuk@suse.de
- Update to version 1.7
- build html docu, too
-------------------------------------------------------------------
Sun Jan 29 13:27:08 UTC 2017 - kukuk@suse.de
- Update to version 1.6
- Add support for kdump [bsc#1018098]
-------------------------------------------------------------------
Thu Jan 19 10:24:13 CET 2017 - kukuk@suse.de
- Update to version 1.5
- Install PTFs in interactive mode
- Sync state file between current and new snapshot
-------------------------------------------------------------------
Tue Jan 17 11:30:19 CET 2017 - kukuk@suse.de
- Update to version 1.4
- Fix wrong error messages
- More debug output if umount fails
- Try a second time if umount fails
-------------------------------------------------------------------
Mon Dec 19 10:37:59 CET 2016 - kukuk@suse.de
- Update to version 1.3
- Add initrd option
-------------------------------------------------------------------
Thu Dec 15 10:38:58 CET 2016 - kukuk@suse.de
- Do some spec file cleanup
-------------------------------------------------------------------
Mon Dec 12 10:18:28 CET 2016 - kukuk@suse.de
- Update to version 1.2
- suppport ro-subvolume with overlayfs
-------------------------------------------------------------------
Tue Dec 6 10:24:19 CET 2016 - kukuk@suse.de
- Update to version 1.1
- bug fix release
- implement lock
-------------------------------------------------------------------
Wed Nov 23 16:36:20 CET 2016 - kukuk@suse.de
- Update to version 1.0
- implement and document PTF options
-------------------------------------------------------------------
Mon Nov 21 13:35:50 CET 2016 - kukuk@suse.de
- Update to version 0.99
- Support for rebootmgr
- Write real manual page
-------------------------------------------------------------------
Mon Nov 21 12:02:44 CET 2016 - kukuk@suse.de
- Add empty directory
/etc/systemd/system/transactional-update.timer.d/
so to make it easier to override transactional-update.timer
entries.
-------------------------------------------------------------------
Thu Nov 17 15:53:00 CET 2016 - kukuk@suse.de
- Update to version 0.90
- Finish normal options
- Implement support for PTFs
-------------------------------------------------------------------
Sun Nov 6 12:52:50 UTC 2016 - kukuk@suse.com
- Disable restart on update for post install scripts
-------------------------------------------------------------------
Sun Nov 6 10:27:01 UTC 2016 - kukuk@suse.de
- Implement activating the new snapshot as new root filesystem
-------------------------------------------------------------------
Fri Nov 4 14:19:49 CET 2016 - kukuk@suse.de
- Initial version
Reference in New Issue View Git Blame Copy Permalink