wireplumber/wireplumber.changes

1670 lines
76 KiB
Plaintext

-------------------------------------------------------------------
Mon Feb 5 06:46:58 UTC 2024 - Antonio Larrosa <alarrosa@suse.com>
- Add patch to only enable bluetooth when audio support is enabled
by installing wireplumber-audio (bsc#1219411):
* fix-bsc1219411.patch
-------------------------------------------------------------------
Tue Dec 5 19:28:42 UTC 2023 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.17:
* Fixes:
- Fix a reference counting issue in the object managers that
could cause crashes due to memory corruption.
- Fix an issue with filters linking to wrong targets, often
with two sets of links.
- Fix a crash in the endpoints policy that would show up when
log messages were enabled at level 3 or higher.
-------------------------------------------------------------------
Sun Nov 26 11:02:03 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>
- Update to version 0.4.16:
* Additions:
- Added a new "sm-objects" script that allows loading objects
on demand via metadata entries that describe the object to
load; this can be used to load pipewire modules, such as
filters or network sources/sinks, on demand
- Added a mechanism to override device profile priorities in
the configuration, mainly as a way to re-prioritize Bluetooth
codecs, but this also can be used for other devices
- Added a mechanism in the endpoints policy to allow connecting
filters between a certain endpoint's virtual sink and the
device sink; this is specifically intended to allow plugging
a filter-chain to act as equalizer on the Multimedia endpoint
- Added wp_core_get_own_bound_id() method in WpCore
* Changes:
- PipeWire 0.3.68 is now required
- policy-dsp now has the ability to hide hardware nodes behind
the DSP sink to prevent hardware misuse or damage
- JSON parsing in Lua now allows keys inside objects to be
without quotes
- Added optional argument in the Lua JSON parse() method to
limit recursions, making it possible to partially parse a
JSON object
- It is now possible to pass nil in Lua object constructors
that expect an optional properties object; previously,
omitting the argument was the only way to skip the properties
- The endpoints policy now marks the endpoint nodes as
"passive" instead of marking their links, adjusting for the
behavior change in PipeWire 0.3.68
- Removed the "passive" property from si-standard-link, since
only nodes are marked as passive now
* Fixes:
- Fixed the wpctl clear-default command to completely clear all
the default nodes state instead of only the last set default
- Reduced the amount of globals that initially match the
interest in the object manager
- Used an idle callback instead of pw_core_sync() in the object
manager to expose tmp globals
- Remove patches included upstream:
* 0001-object-manager-reduce-the-amount-of-globals-that-initially.patch
* 0002-object-manager-use-an-idle-callback-to-expose-tmp-globals.patch
* 0001-policy-dsp-add-ability-to-hide-parent-nodes.patch
- Update split-config-file.py
-------------------------------------------------------------------
Tue Oct 31 08:30:21 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream that fixes too many matches for property
interest:
* 0001-object-manager-reduce-the-amount-of-globals-that-initially.patch
- Add patch from upstream that fixes an odd failure of a test after
applying the previous patch:
* 0002-object-manager-use-an-idle-callback-to-expose-tmp-globals.patch
- Add patch from upstream that adds ability to hide parent nodes,
which is useful to prevent hardware misuse or damage by poorly
behaved/configured clients:
* 0001-policy-dsp-add-ability-to-hide-parent-nodes.patch
-------------------------------------------------------------------
Fri Oct 13 07:17:56 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>
- Update to version 0.4.15:
* Additions:
- A new "DSP policy" module has been added; its purpose is to
automatically load a filter-chain when a certain hardware
device is present, so that audio always goes through this
software DSP before reaching the device. This is mainly to
support Apple M1/M2 devices, which require a software DSP
to be always present
- WpImplModule now supports loading module arguments directly
from a SPA-JSON config file; this is mainly to support DSP
configuration for Apple M1/M2 and will likely be reworked
for 0.5
- Added support for automatically combining Bluetooth LE Audio
device sets (e.g. pairs of earbuds) (!500)
- Added command line options in wpctl to display device/node
names and nicknames instead of descriptions
- Added zsh completions file for wpctl
- The device profile selection policy now respects the
device.profile property if it is set on the device; this is
useful to hand-pick a profile based on static configuration
rules (alsa_monitor.rules)
* Changes/Fixes:
- Linking policy now sends an error to the client before
destroying the node, if it determines that the node cannot be
linked to any target; this fixes error reporting on the
client side
- Fixed a crash in suspend-node that could happen when
destroying virtual sinks that were loaded from another
process such as pw-loopback
- Virtual machine default period size has been bumped to 1024
- Updated bluez5 default configuration, using bluez5.roles
instead of bluez5.headset-roles now (!498)
- Disabled Bluetooth autoconnect by default (!514)
- Removed RestrictNamespaces option from the systemd services
in order to allow libcamera to load sandboxed IPA modules
- Fixed a JSON encoding bug with empty strings
- Lua code can now parse strings without quotes from SPA-JSON
- Added some missing \since annotations and made them show up
in the generated gobject-introspection file, to help bindings
generators
- Add zsh-completion subpackage
-------------------------------------------------------------------
Fri May 19 17:26:12 UTC 2023 - Alexei Sorokin <sor.alexei@meowr.ru>
- Require wireplumber-audio if pipewire-jack is installed.
- Recommend pipewire-jack in wireplumber-audio.
-------------------------------------------------------------------
Fri Mar 10 23:20:12 UTC 2023 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.14:
* Additions
- Add support for managing Bluetooth-MIDI, complementing the
parts that were merged in PipeWire recently.
- Add a default volume configuration option for streams whose
volume has never been saved before; that allows starting new
streams at a lower volume than 100% by default, if desired.
- Add support for managing link errors and propagating them to
the client(s) involved. This allows better error handling on
the application side in case a format cannot be negotiated -
useful in video streams.
- snd_aloop devices are now described as being "Loopback"
devices.
- ALSA nodes in the pro audio profile now get increased graph
priority, so that they are more likely to become the driver
in the graph.
- Add support for disabling libcamera nodes & devices with
node.disabled and device.disabled, like it works for ALSA
and V4L2.
- Drop reduce-meson-required-version.patch: openSUSE Leap 15.3 is
no longer supported.
- Drop patches already included upstream:
* 0001-alsa-monitor-handle-snd_aloop-devices-better.patch
* 0001-spa-json-make-sure-we-only-add-encoded-string-data.patch
* 0001-m-lua-scripting-ignore-string-integer-table-keys-when-constructing-a-JSON-Array-Object.patch
-------------------------------------------------------------------
Fri Jan 13 10:51:07 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>
- Backport the workaround from SLE/Leap for the bug in systemd
scripts that didn't set the default enable state for the
wireplumber user service when installing wireplumber. The bug
(boo#1200485) was fixed but that's only for new installations
while this workaround will fix old installations (boo#1202008).
This is used to automatically fix installations of
SLE 15 SP4/Leap 15.4 that were not updated during it's lifetime
and upgrade directly to SP5/15.5 .
-------------------------------------------------------------------
Wed Jan 11 12:41:28 UTC 2023 - Antonio Larrosa <alarrosa@suse.com>
- Add upstream patches to fix glfo#pipewire/pipewire#2214 and to
handle better non-null terminated strings:
* 0001-alsa-monitor-handle-snd_aloop-devices-better.patch
* 0001-spa-json-make-sure-we-only-add-encoded-string-data.patch
* 0001-m-lua-scripting-ignore-string-integer-table-keys-when-constructing-a-JSON-Array-Object.patch
-------------------------------------------------------------------
Tue Dec 13 14:43:46 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.13:
* Additions
- Add bluetooth SCO (HSP/HFP) hardware offload support,
together with an example script that enables this
functionality on the PinePhone.
- Encoded audio (mp3, aac, etc...) can now be passed through,
if this mode is supported by both the application and the
device.
- The v4l2 monitor now also respects the ``node.disabled`` and
``device.disabled`` properties inside rules.
- Add "Firefox Developer Edition" to the list of applications
that are allowed to trigger a bluetooth profile auto-switch.
- Add support in the portal access script to allow newly
plugged cameras to be immediately visible to the portal
applications.
* Fixes
- Work around an issue that would prevent streams from properly
linking when using effects software like EasyEffects and
JamesDSP.
- Fix destroying pavucontrol-qt monitor streams after the node
that was being monitored is destroyed.
- Fix a crash in the alsa.lua monitor that could happen when a
disabled device was removed and re-added.
- Fix a rare crash in the metadata object.
- Fix a bug where a restored node target would override the
node target set by the application on the node's properties.
* Packaging
- Add build options to compile wireplumber's library, daemon
and tools independently.
- Add a build option to disable unit tests that require the
dbus daemon.
- Stop using fakesink/fakesrc in the unit tests to be able to
run them on default pipewire installations. Compiling the spa
``test`` plugin is no longer necessary.
- Add pkg-config and header information in the gir file.
- Rebase reduce-meson-required-version.patch
- Drop patches already upstream:
* 0001-alsa.lua-remove-the-disabled-entities-from-the-names-table.patch
* 0001-policy-node-wait-for-unactivated-links-instead-of-removing.patch
-------------------------------------------------------------------
Tue Nov 15 08:21:15 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to work around a problem when a link is
not activated:
* 0001-policy-node-wait-for-unactivated-links-instead-of-removing.patch
- Add patch from upstream to fix handling null devices which result
in lua exceptions:
* 0001-alsa.lua-remove-the-disabled-entities-from-the-names-table.patch
-------------------------------------------------------------------
Tue Oct 4 13:01:17 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.12:
* Changes
- WirePlumber now maintains a stack of previously configured
default nodes and prioritises to one of those when the
actively configured default node becomes unavailable, before
calculating the next default using priorities.
- Updated bluetooth scripts to support the name changes that
happened in PipeWire 0.3.59 and also support the experimental
Bluetooth LE functionality.
- Changed the naming of bluetooth nodes to not include the
profile in it; this allows maintaining existing links when
switching between a2dp and hfp.
- The default volume for new outputs has changed to be 40% in
cubic scale (= -24 dB) instead of linear
(= 74% cubic / -8 dB) that it was before.
- The default volume for new inputs has changed to be 100%
rather than following the default for outputs.
- Added ``--version`` flag on the wireplumber executable.
- Added ``--limit`` flag on ``wpctl set-volume`` to limit the
higher volume that can be set (useful when incrementing
volume with a keyboard shortcut that calls into wpctl).
- The properties of the alsa midi node can now be set in the
config files.
* Fixes
- Fixed a crash in lua code that would happen when running in a
VM.
- Fixed a crash that would happen when re-connecting to D-Bus.
- Fixed a mistake in the code that would cause device
reservation not to work properly.
- Fixed ``wpctl clear-default`` to accept 0 as a valid setting ID.
- Fixed the logic of choosing the best profile after the active
profile of a device becomes unavailable
- Fixed a regression that would cause PulseAudio "corked"
streams to not properly link and cause busy loops.
- Fixed an issue parsing spa-json objects that have a nested
object as the value of their last property.
- Rebase reduce-meson-required-version.patch
- Drop patches already upstream:
* fix-alsa.patch
* 0001-dbus-fix-crash-when-trying-to-reconnect.patch
* 398.patch
-------------------------------------------------------------------
Fri Aug 5 21:07:13 UTC 2022 - Atri Bhattacharya <badshah400@gmail.com>
- Add 398.patch -- policy-node: fix potential rescan loop to
prevent high cpu usage (glfo#pipewire/wireplumber#152); patch
taken from upstream merge request.
-------------------------------------------------------------------
Thu Jul 14 08:35:10 UTC 2022 - Fabian Vogt <fvogt@suse.com>
- Add patch to fix crash on session end:
* 0001-dbus-fix-crash-when-trying-to-reconnect.patch
-------------------------------------------------------------------
Fri Jul 8 11:02:44 UTC 2022 - Fabian Vogt <fvogt@suse.com>
- Add patch to fix alsa device creation:
* fix-alsa.patch
-------------------------------------------------------------------
Tue Jul 5 15:13:07 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.11:
* Changes
- The libcamera monitor is now enabled by default, so if the
libcamera source is enabled in PipeWire, cameras discovered
with the libcamera API will be available out of the box.
This is safe to use alongside V4L2, as long as the user does
not try to use the same camera over different APIs at the
same time.
- Libcamera and V4L2 nodes now get assigned a
`priority.session` number; V4L2 nodes get a higher priority
by default, so the default camera is going to be /dev/video0
over V4L2, unless changed with `wpctl`.
- Libcamera nodes now get a user-friendly description based on
their location (e.g. built-in front camera). Additionally,
V4L2 nodes now have a "(V4L2)" string appended to their
description in order to be distinguished from the libcamera
ones.
- 50-alsa-config.lua now has a section where you can set
properties that will only be applied if WirePlumber is
running in a virtual machine. By default it now sets
`api.alsa.period-size = 256` and `api.alsa.headroom = 8192`.
* Fixes
- The "enabled" properties in the config files are now "true"
by default when they are not defined. This fixes backwards
compatibility with older configuration files.
- Fixed device name deduplication in the alsa monitor, when
device reservation is enabled.
- Reverted a previous fix that makes it possible again to get
a glitch when changing default nodes while also changing the
profile (GNOME Settings).
The fix was causing other problems and the issue will be
addressed differently in the future.
- Fixed an issue that would prevent applications from being
moved to a recently plugged USB headset.
- Fixed an issue where wireplumber would automatically link
control ports, if they are enabled, to audio ports,
effectively breaking audio.
- The policy now always considers the profile of a device that
was previously selected by the user, if it is available, when
deciding which profile to activate.
- A few documentation fixes.
* Tools
- wpctl now has a `get-volume` command for easier scripting of
volume controls.
- wpctl now supports relative steps and percentage-based steps
in `set-volume`.
- wpctl now also prints link states.
- wpctl can now `inspect` metadata objects without showing
critical warnings.
* Library
- A new WpDBus API was added to maintain a single D-Bus
connection among modules that need one.
- WpCore now has a method to get the virtual machine type, if
WirePlumber is running in a virtual machine.
- WpSpaDevice now has a
`wp_spa_device_new_managed_object_iterator()` method.
- WpSpaJson now has a `wp_spa_json_to_string()` method that
returns a newly allocated string with the correct size of the string token.
- WpLink now has a `WP_LINK_FEATURE_ESTABLISHED` that allows
the caller to wait until the link is in the PAUSED or ACTIVE
state. This transparently now enables watching links for
negotiation or allocation errors and failing gracefully
instead of keeping dead link objects around.
* Misc
- The Lua subproject was bumped to version 5.4.4.
- Rebase reduce-meson-required-version.patch
-------------------------------------------------------------------
Tue May 10 14:39:24 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.10:
* Changes
- Add i18n support to be able to translate some user-visible
strings.
- wpctl now supports using
@DEFAULT_{AUDIO_,VIDEO_,}{SINK,SOURCE}@ as ID, almost like
pactl. Additionally, it supports a --pid flag for changing
volume and mute state by specifying a process ID, applying
the state to all nodes of a specific client process.
- The Lua engine now supports loading Lua libraries. These can
be placed either in the standard Lua libraries path or in
the "lib" subdirectory of WirePlumber's "scripts" directory
and can be loaded with ``require()``
- The Lua engine's sandbox has been relaxed to allow more
functionality in scripts (the debug & coroutine libraries
and some other previously disabled functions)
- Lua scripts are now wrapped in special WpPlugin objects,
allowing them to load asynchronously and declare when they
have finished their loading
- Add a new script that provides the same functionality as
module-fallback-sink from PipeWire, but also takes endpoints
into account and can be customised more easily. Disabled by
default for now to avoid conflicts.
* Policy
- Add an optional experimental feature that allows filter-like
streams (like echo-cancel or filter-node) to match the
channel layout of the device they connect to, on both sides
of the filter; that means that if, for instance, a sink has
6 channels and the echo-cancel's source stream is linked to
that sink, then the virtual sink presented by echo-cancel
will also be configured to the same 6 channels layout. This
feature needs to be explicitly enabled in the configuration
("filter.forward-format")
- filter-like streams (filter-chain and such) no longer follow
the default sink when it changes, like in PulseAudio.
* Fixes
- The suspend-node script now also suspends nodes that go into
the "error" state, allowing them to recover from errors
without having to restart WirePlumber.
- Fix a crash in mixer-api when setting volume with
channelVolumes.
- logind module now watches only for user state changes,
avoiding errors when machined is not running.
* Misc
- The configuration files now have comments mentioning which
options need to be disabled in order to run WirePlumber
without D-Bus.
- The configuration files now have properties to
enable/disable the monitors and other sections, so that it
is possible to disable them by dropping in a file that just
sets the relevant property to false.
- setlocale() is now called directly instead of relying on
pw_init().
- WpSpaJson received some fixes and is now used internally to
parse configuration files.
- More applications were added to the bluetooth auto-switch
applications whitelist.
- Add a new wireplumber-lang package.
- Drop patches already upstream:
* 0001-scripts-policy-device-profile-clear-tables-when-devices-removed.patch
* 0001-src-setlocale-in-main-for-tools-and-the-daemon.patch
- Rebase reduce-meson-required-version.patch
-------------------------------------------------------------------
Wed Mar 30 16:12:03 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to fix no sound on reconnection of
bluetooth device (glfo#pipewire/wireplumber#234):
* 0001-scripts-policy-device-profile-clear-tables-when-devices-removed.patch
-------------------------------------------------------------------
Tue Mar 29 12:04:24 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to set locale in apps now that pw_init
doesn't call it by itself anymore in pipewire 0.3.49:
* 0001-src-setlocale-in-main-for-tools-and-the-daemon.patch
-------------------------------------------------------------------
Fri Mar 25 07:47:09 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Make the wireplumber-audio noarch as it just contains a lua
config file.
-------------------------------------------------------------------
Tue Mar 22 18:36:13 UTC 2022 - alarrosa@suse.com
- Update to version 0.4.9:
* Fixes:
- restore-stream no longer crashes if properties for it are not
present in the config (#190)
- spa-json no longer crashes on non-x86 architectures
- Fixed a potential crash in the bluetooth auto-switch module
(#193)
- Fixed a race condition that would cause Zoom desktop audio
sharing to fail (#197)
- Surround sound in some games is now exposed properly
(pipewire#876)
- Fixed a race condition that would cause the default source &
sink to not be set at startup
- policy-node now supports the 'target.object' key on streams
and metadata
- Multiple fixes in policy-node that make the logic in some
cases behave more like PulseAudio (regarding nodes with the
dont-reconnect property and regarding following the default
source/sink)
- Fixed a bug with parsing unquoted strings in spa-json
* Misc:
- The policy now supports configuring "persistent" device
profiles. If a device is manually set to one of these
profiles, then it will not be auto-switched to another
profile automatically under any circumstances (#138, #204)
- The device-activation module was re-written in lua
- Brave, Edge, Vivaldi and Telegram were added in the bluetooth
auto-switch applications list
- ALSA nodes now use the PCM name to populate node.nick, which
is useful at least on HDA cards using UCM, where all outputs
(analog, hdmi, etc) are exposesd as nodes on a single profile
- An icon name is now set on the properties of bluetooth devices
- Drop patches already upstream:
* 0001-spa-json-fix-va_list-APIs-for-different-architectures.patch
* 0001-restore-stream-do-not-crash-if-config_properties-is-nil.patch
* 0002-policy-bluetooth-fix-string.find-crash-with-nil-string.patch
* 0003-si-audio-adapter-relax-format-parsing.patch
- Update split-config-file.py script
-------------------------------------------------------------------
Thu Mar 10 12:14:13 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Add patch from upstream to fix a crash on tty switch
(glfo#pipewire/wireplumber#193):
* 0002-policy-bluetooth-fix-string.find-crash-with-nil-string.patch
- Add patch from upstream to fix issues with PulseAudio support with
PipeWire 0.3.48+ (glfo#pipewire/pipewire#2189):
* 0003-si-audio-adapter-relax-format-parsing.patch
- Some spec clean-up.
-------------------------------------------------------------------
Fri Feb 11 08:09:05 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to fix va_list APIs for ppc64le and
aarch64, where va_list is not a pointer (boo#1195818):
* 0001-spa-json-fix-va_list-APIs-for-different-architectures.patch
- Add patch from upstream to fix a crash if config.properties is
nil:
* 0001-restore-stream-do-not-crash-if-config_properties-is-nil.patch
-------------------------------------------------------------------
Mon Feb 7 17:31:11 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Update to version 0.4.8:
* Highlights:
- Added bluetooth profile auto-switching support. Bluetooth
headsets will now automatically switch to the HSP/HFP profile
when making a call and go back to the A2DP profile after the
call ends (#90)
- Added an option (enabled by default) to auto-switch to
echo-cancel virtual device nodes when the echo-cancel module
is loaded in pipewire-pulse, if there is no other configured
default node
* Fixes:
- Fixed a regression that prevented nodes from being selected
as default when using the pro-audio profile (#163)
- Fixed a regression that caused encoded audio streams to stall
(#178)
- Fixed restoring bluetooth device profiles
* Library:
- A new WpSpaJson API was added as a front-end to spa-json.
This is also exposed to Lua, so that Lua scripts can natively
parse and write data in the spa-json format
* Misc:
- wpctl can now list the configured default sources and sinks
and has a new command that allows clearing those configured
defaults, so that wireplumber goes back to choosing the
default nodes based on node priorities
- The restore-stream script now has its own configuration file
in main.lua.d/40-stream-defaults.lua and has independent
options for restoring properties and target nodes
- The restore-stream script now supports rule-based
configuration to disable restoring volume properties and/or
target nodes for specific streams, useful for applications
that misbehave when we restore those (see #169)
- policy-endpoint now assigns the "Default" role to any stream
that does not have a role, so that it can be linked to a
pre-configured endpoint
- The route-settings-api module was dropped in favor of dealing
with json natively in Lua, now that the API exists
- Drop patch which is already upstream:
* 0001-default-nodes-handle-nodes-without-Routes.patch
- Update split-config-file.py script
-------------------------------------------------------------------
Mon Jan 31 17:45:11 UTC 2022 - Callum Farmer <gmbr3@opensuse.org>
- Use the default lua instead of hardcoding 5.3
-------------------------------------------------------------------
Tue Jan 25 15:08:59 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Update to version 0.4.7:
* Fixed a regression in 0.4.6 that caused the selection of the
default audio sources and sinks to be delayed until some event,
which effectively caused losing audio output in many
circumstances (glfo#pipewire/wireplumber#148,
glfo#pipewire/wireplumber#150, glfo#pipewire/wireplumber#151,
glfo#pipewire/wireplumber#153)
* Fixed a regression in 0.4.6 that caused the echo-cancellation
pipewire module (and possibly others) to not work
* A default sink or source is now not selected if there is no
available route for it (glfo#pipewire/wireplumber#145)
* Fixed an issue where some clients would wait for a bit while
seeking (glfo#pipewire/wireplumber#146)
* Fixed audio capture in the endpoints-based policy
* Fixed an issue that would cause certain lua scripts to error
out with older configuration files
(glfo#pipewire/wireplumber#158)
- Drop patches already included upstream:
* 0001-policy-node-schedule-rescan-without-timeout-if-defined-target-is-not-found.patch
* 0002-policy-node-find-best-linkable-if-default-one-cannot-be-linked.patch
- Add patch from upstream to fix selection of Pro Audio nodes
as default nodes:
* 0001-default-nodes-handle-nodes-without-Routes.patch
-------------------------------------------------------------------
Mon Jan 10 09:50:15 UTC 2022 - Antonio Larrosa <alarrosa@suse.com>
- Reformat .changes file to limit lines to 67 chars when possible.
-------------------------------------------------------------------
Sat Jan 8 16:12:57 UTC 2022 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 0.4.6:
* Fix a lot of race condition bugs that would cause strange
crashes or many log messages being printed when streaming
clients would connect and disconnect very fast.
* Improve the logic for selecting a default target device.
* Fix switching to headphones when the wired headphones are
plugged in.
* Fix an issue where "udevadm trigger" would break wireplumber.
* Fix an issue where switching profiles of a device could kill
client nodes.
* Fix briefly switching output to a secondary device when
switching device profiles (#85)
* Fix "wpctl status" showing default device selections when
dealing with module-loopback virtual sinks and sources.
* WirePlumber now ignores hidden files from the config directory.
* Fix an interoperability issue with jackdbus.
* Fix an issue where pulseaudio tcp clients would not have
permissions to connect to PipeWire.
* Fix a crash in the journald logger with NULL debug messages.
* Enable real-time priority for the bluetooth nodes to run in RT.
* Make the default stream volume configurable.
* Scripts are now also looked up in
$XDG_CONFIG_HOME/wireplumber/scripts
* Update documentation on configuring WirePlumber and fixed some
more documentation issues.
* Add support for using strings as log level selectors in
WIREPLUMBER_DEBUG.
- Drop patches merged upstream:
* 0001-m-reserve-device-replace-the-hash-table-key-on-new-insert.patch
* 0002-policy-node-wait-for-nodes-when-we-become-unlinked.patch
- Add patch from upstream to fix a pulse client hanging issue:
* 0001-policy-node-schedule-rescan-without-timeout-if-defined-target-is-not-found.patch
- Add patch from upstream to fix an issue with
libpipewire-module-echo-cancel:
* 0002-policy-node-find-best-linkable-if-default-one-cannot-be-linked.patch
-------------------------------------------------------------------
Wed Dec 15 13:48:27 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Remove many build dependencies which aren't really needed
-------------------------------------------------------------------
Sat Dec 11 16:54:56 UTC 2021 - Fabian Vogt <fabian@ritter-vogt.de>
- Use %autosetup, apply patches unconditionally
- Hard depend on wireplumber-audio if pipewire-pulseaudio is installed
-------------------------------------------------------------------
Thu Dec 9 12:08:45 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Supplements: (pipewire-pulseaudio and wireplumber) so everyone
having those two packages already installed automatically get
wireplumber-audio pulled in.
-------------------------------------------------------------------
Thu Dec 9 10:08:43 UTC 2021 - Bjørn Lie <bjorn.lie@gmail.com>
- Quiet setup of sources, no need to see the package untared.
- Disable tests for ppc64 for now like we do for i586.
-------------------------------------------------------------------
Fri Dec 3 18:12:42 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Split the configuration to separate the audio initialization
to a new wireplumber-audio subpackage. This way, if that package
is not installed, pipewire doesn't open the audio devices, thus
not entering a race-condition with pulseaudio but still allowing
to manage v4l2 devices and sharing the screen in wayland, for
example (boo#1188516).
-------------------------------------------------------------------
Wed Nov 24 16:09:52 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add patches from upstream to fix wireplumber breaking when
udevadm trigger is run:
* 0001-m-reserve-device-replace-the-hash-table-key-on-new-insert.patch
- And another patch to fix an issue where there is only 1 sink
available and the card profile is toggeled between pro and
stereo:
* 0002-policy-node-wait-for-nodes-when-we-become-unlinked.patch
-------------------------------------------------------------------
Thu Nov 11 13:25:33 UTC 2021 - alarrosa@suse.com
- Update to version 0.4.5:
* Fixes:
- Fixed a crash that could happen after a node linking error
(glfo#pipewire/wireplumber#76)
- Fixed a bug that would cause capture streams to link to
monitor ports of loopback nodes instead of linking to their
capture ports
- Fixed a needless wait that would happen on applications using
the pipewire ALSA plugin (glfo#pipewire/wireplumber#92)
- Fixed an issue that would cause endless rescan loops in
policy-node and could potentially also cause other strange
behaviors in case pavucontrol or another monitoring utility
was open while the policy was rescanning
(glfo#pipewire/wireplumber#77)
- Fixed the endpoints-based policy that broke in recent
versions and improved its codebase to share more code and be
more in-line with policy-node
- The semicolon character is now escaped properly in state
files (glfo#pipewire/wireplumber#82)
- When a player requests encoded audio passthrough, the policy
now prefers linking to a device that supports that instead of
trying to link to the default device and potentially failing
(glfo#pipewire/wireplumber#75)
- Miscellaneous robustness fixes in policy-node
* API:
- Added WpFactory, a binding for pw_factory proxies. This
allows object managers to query factories that are loaded in
the pipewire daemon
- The file-monitor-api plugin can now watch files for changes
in addition to directories
- Remove patches already included by upstream:
* 0001-si-standard-link-fix-crash-after-returning-a-link-error.patch
* 0002-policy-node-enforce-the-direction-of-the-target-when-linking-by-node-name.patch
* 0001-add-missing-break-in-best-route-selection-logic.patch
-------------------------------------------------------------------
Wed Nov 3 08:34:01 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to fix a problem saving the default
route:
* 0001-add-missing-break-in-best-route-selection-logic.patch
- Add patch to let wireplumber build in Leap 15.3/SLE-15-SP3
which only have meson 0.54:
* reduce-meson-required-version.patch
-------------------------------------------------------------------
Thu Oct 21 10:15:34 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add %post/%pre/... sections to enable the user service
automatically
-------------------------------------------------------------------
Tue Oct 19 10:59:25 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to fix selection of capture ports instead
of monitor ports:
* 0002-policy-node-enforce-the-direction-of-the-target-when-linking-by-node-name.patch
-------------------------------------------------------------------
Tue Oct 19 07:25:22 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add patch from upstream to fix a crash when there's a link error
(glfo#pipewire/wireplumber#76):
* 0001-si-standard-link-fix-crash-after-returning-a-link-error.patch
-------------------------------------------------------------------
Fri Oct 15 15:55:46 UTC 2021 - alarrosa@suse.com
- Update to version 0.4.4:
* Highlights:
- Implemented linking nodes in passthrough mode, which enables
encoded iec958 / dsd audio passthrough
- Streams are now sent an error if it was not possible to link
them to a target (#63)
- When linking nodes where at least one of them has an
unpositioned channel layout, the other one is not
reconfigured to match the channel layout; it is instead
linked with a best effort port matching logic
- Output route switches automatically to the latest one that
has become available (#69)
- Policy now respects the 'node.exclusive' and 'node.passive'
properties
- Many other minor policy fixes for a smoother desktop usage
experience
* API:
- Fixed an issue with the LocalModule() constructor not
accepting nil as well as the properties table properly
- Added WpClient.send_error(), WpSpaPod.fixate() and
- WpSpaPod.filter() (both in C and Lua)
* Misc:
- Bumped meson version requirement to 0.56 to be able to use
meson.project_{source,build}_root() and ease integration with
pipewire's build system as a subproject
- wireplumber.service is now an alias to
pipewire-session-manager.service
- Loading the logind module no longer fails if it was not found
on the system; there is only a message printed in the output
- The logind module can now be compiled with elogind (#71)
- Improvements in wp-uninstalled.sh, mostly to ease its
integration with pipewire's build system when wireplumber is
build as a subproject
- The format of audio nodes is now selected using the same
algorithm as in media-session
- Fixed a nasty segfault that appeared in 0.4.3 due to a typo
(#72)
- Fixed a re-entrancy issue in the wplua runtime (#73)
- Update to version 0.4.3:
* Fixes:
- Implemented logind integration to start the bluez monitor
only on the WirePlumber instance that is running on the
active seat; this fixes a bunch of startup warnings and the
disappearance of HSP/HFP nodes after login (#54)
- WirePlumber is now launched with GIO_USE_VFS=local to avoid
strange D-Bus interference when the user session is
restarted, which previously resulted in WirePlumber being
terminated with SIGTERM and never recovering (#48)
- WirePlumber now survives a restart of the D-Bus service,
reconnecting to the bus and reclaiming the bus services that
it needs (#55)
- Implemented route-settings metadata, which fixes storing
volume for the "System Sounds" in GNOME (#51)
- Monitor sources can now be selected as the default source
(#60)
- Refactored some policy logic to allow linking to monitors;
the policy now also respects "stream.capture.sink" property
of streams which declares that the stream wants to be linked
to a monitor (#66)
- Policy now cleans up 'target.node' metadata so that streams
get to follow the default source/sink again after the default
was changed to match the stream's currently configured target
(#65)
- Fixed configuring virtual sources (#57)
- Device monitors now do not crash if a SPA plugin is missing;
instead, they print a warning to help users identify what
they need to install (!214)
- Fixed certain "proxy activation failed" warnings (#44)
- iec958 codec configuration is now saved and restored properly
(!228)
- Fixed some logging issues with the latest version of pipewire
(!227, !232)
- Policy now respects the "node.link-group" property, which
fixes issues with filter-chain and other virtual sources &
sinks (#47)
- Access policy now grants full permissions to flatpak
"Manager" apps (#59)
* Policy:
- Added support for 'no-dsp' mode, which allows streaming audio
using the format of the device instead of the standard float
32-bit planar format (!225)
* Library:
- WpImplMetadata is now implemented using pw_impl_metadata
instead of using its own implementation (#52)
- Added support for custom object property IDs in WpSpaPod
(#53)
* Misc:
- Added a script to load the libcamera monitor (!231)
- Added option to disable building unit tests (!209)
- WirePlumber will now fail to start with a warning if
pipewire-media-session is also running in the system (#56)
- The bluez monitor configuration was updated to match the
latest one in pipewire-media-session (!224)
- Update to version 0.4.2:
* Highlights:
- Requires PipeWire 0.3.32 or later at runtime
- Configuration files are now installed in
$PREFIX/share/wireplumber, along with scripts, following the
paradigm of PipeWire
- State files are now stored in $XDG_STATE_HOME instead of
$XDG_CONFIG_HOME
- Added new file-monitor-api module, which allows Lua scripts
to watch the filesystem for changes, using inotify
- Added monitor for MIDI devices
- Added a system-lua-version meson option that allows
distributors to choose which Lua version to build against
(auto, 5.3 or 5.4)
- wpipc has been removed and split out to a separate project,
https://git.automotivelinux.org/src/pipewire-ic-ipc/
* Library:
- A new WpImplModule class has been added; this allows loading
a PipeWire module in the WirePlumber process space, keeping a
handle that can be used to unload that module later. This is
useful for loading filters, network sources/sinks, etc...
- State files can now store keys that contain certain
GKeyFile-reserved characters, such as [, ], = and space; this
fixes storing stream volume state for streams using
PipeWire's ALSA compatibility PCM plugin
- WpProperties now uses a boxed WpPropertiesItem type in its
iterators so that these iterators can be used with g-i
bindings
- Added API to lookup configuration and script files from
multiple places in the filesystem
* Lua:
- A LocalModule API has been added to reflect the functionality
offered by WpImplModule in C
- The Node API now has a complete set of methods to reflect the
methods of WpNode
- Added Port.get_direction()
- Added not-equals to the possible constraint verbs
- Debug.dump_table now sorts keys before printing the table
* Misc:
- Tests no longer accidentally create files in $HOME; all
transient files that are used for testing are now created
in the build directory, except for sockets which are created
in /tmp due to the 108-character limitation in socket paths
- Tests that require optional SPA plugins are now skipped if
those SPA plugins are not installed
- Added a nice summary output at the end of meson configuration
- Documented the Lua ObjectManager / Interest / Constraint APIs
- Fixed some memory leaks
-------------------------------------------------------------------
Wed Jul 14 14:57:37 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Remove the Conflicts: pipewire-session-manager. There's no
problem in having both installed at the same time, they just
can't run at the same time.
-------------------------------------------------------------------
Wed Jul 14 06:25:10 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Add `Provides: pipewire-session-manager` so wireplumber is
recognized as a pipewire session manager implementation.
- Add `Conflicts: pipewire-session-manager` so no other session
manager is installed at the same time.
-------------------------------------------------------------------
Tue Jul 13 06:23:39 UTC 2021 - Antonio Larrosa <alarrosa@suse.com>
- Update to version 0.4.1:
* Highlights:
+ WirePlumber now supports Lua 5.4. You may compile it either
with Lua 5.3 or 5.4, without any changes in behavior. The
internal Lua subproject has also been upgraded to Lua 5.4, so
any builds with -Dsystem-lua=false will use Lua 5.4 by
default
* Fixes:
+ Fixed filtering of pw_metadata objects, which broke with
PipeWire 0.3.31
+ Fixed a potential livelock condition in
si-audio-adapter/endpoint where the code would wait forever
for a node's ports to appear in the graph
+ Fixed granting access to camera device nodes in flatpak
clients connecting through the camera portal
+ Fixed a lot of issues found by the coverity static analyzer
+ Fixed certain race conditions in the wpipc library
+ Fixed compilation with GCC older than v8.1
* Scripts:
+ Added a policy script that matches nodes to specific devices
based on the "media.role" of the nodes and the
"device.intended-roles" of the devices
* Build system:
+ Bumped GLib requirement to 2.62, as the code was already
using 2.62 API
+ Added support for building WirePlumber as a PipeWire
subproject
+ Doxygen version requirement has been relaxed to accept v1.8
+ The CI now also verifies that the build works on
Ubuntu 20.04 LTS and tries multiple builds with different
build options
-------------------------------------------------------------------
Thu Jun 24 10:46:58 UTC 2021 - alarrosa@suse.com
- Update to version 0.4.0:
* release 0.4.0
* create-item: handle all kinds of Audio/Video & Stream nodes
* si-standard-link: treat endpoints as devices when linking
stream<->endpoint
* config: document the duck.level policy property
* scripts: change debug level for some messages
* lua: improve the object:activate() callback to report errors
* wplua: add a wplua_checkclosure() helper function
* Revert "tests: enable G_SLICE=debug-blocks in all tests"
* meson: add '--keep-debuginfo=yes' to the valgrind command line
* pipewire-object: change params-changed signal to take a string
param name
* tests: enable G_SLICE=debug-blocks in all tests
* meson: use environment() objects to define env for tests
* meson: add a test setup to run tests under valgrind
* daemon/wpexec: standardize exit codes based on sysexits.h
* daemon: replace the exit_message with direct message printouts
* wpexec: force the log level to be at least 1 and use fprintf()
for local errors
* daemon: exit with 0 both in case of a signal and in case of
disconnection
* tests: si-standard-link: remove unneeded core syncs
* tests: common: make sure no events are pending before
destroying core
* lib: add struct paddings to be able to maintain ABI
compatibility
* docs: set breathe_default_members to get struct members to show
up in the docs
* docs: remove :project: annotations for breathe
* pw-object-mixin: ignore set param on already destroyed objects
* proxy: destroy pw_proxy if bind_error is called
* restore-stream: implement storing/restoring of target.node
metadata
* lua: implement metadata:set()
* lua: fix refcounting of metadata iterator
* wplua: fix memleak when converting GVariant to Lua
* m-default-nodes-api: free default nodes when disabling plugin
* m-default-nodes: free default nodes when disabling plugin
* global-proxy: fix leak when getting global properties
* spa-pod: check if pod is valid before _parser_can_collect
* lua: remove hack around WpObjectInterest since we can _ref()
it now
* object-interest: remove unused _copy() method
* default-routes: use a constraint to check if device.name is
present
* default-routes: fix storing dev_info
* scripts: initial restore-stream implementation
* object-manager: small doc fix
* object-manager: support declaring interest on all properties of
globals
* object-interest: enrich _matches_full() to be able to check all
constraints
* si-adapter: handle autoconnect property
* si-adapter: handle dont-remix streams
* tests: store temporary WpState files in the build directory
* state: remove support for groups and propagate save errors
* state: don't stat() before creating the dir or removing the
state file
* policy: don't crash if some node properties are not set
* pipewire-object: fix memory leaks when getting properties
* m-default-profiles: finalize parent when plugin is destroyed
* si-adapter: take ownership of format argument
* endpoint: free media_class when disposing WpImplEndpoint
* pipewire-object: take ownership of param argument
* monitors: sanitize device names like media-session does
* object: advance pending transitions if activation fails
* modules: remove the old m-default-routes
* m-device-activation: don't set device routes
* default-routes: re-implement the default-routes module in lua
* docs: Write gtk-doc comments for constant variables
* docs: include wp.h in gir sources
* docs: Add brief descriptions to all functions
* policy: destroy node if defined target was not found and
reconnect is false
* global-proxy: make sure registry is valid before requesting
destroy
* lua: don't crash if an iterator is NULL
* lua: allow the Log api to debug boxed objects (useful for pods)
* lua: fix PipewireObject api: s/set_params/set_param/ and
cleanup
* lua: add WpState bindings
* object: use weakref when advancing current transition
* object: use destroy notify to keep self alive while advancing
transitions
* docs: make progress on lua api documentation
* policy-{node,endpoint-client}: do not crash if media.class is
nil
* meson: add reference to bugfix
* config: disable role-based endpoints in the default
configuration
* tests: si-audio-adapter: test is.device property
* m-si-standard-link: fix number of links check
* tests: si-standard-link: fix racy test
* meson: force the gir target to depend on wp-gtkdoc.h
* docs: tidy up most documents and try to update the information
in them
* docs: use the default sidebar color to make the version easier
to read
* docs: show version number on the sidebar
* release 0.3.96
* Makefile: use wp-uninstalled.sh to implement the run target
* gitignore: remove obsolete entry
* editorconfig: remove obsolete entry and add python script rules
* LICENSE: update copyright years
* docs: convert NEWS to rst and add it in the generated docs
* docs: update installing-wireplumber page
* ci: bump distribution tag date to the actual branch merge day
* gir: fix generate_gir()
* docs: convert lua api docs to pure rst
* docs: fix gobject-introspection data generation
* ci: update fdo template, fedora image and dependencies for docs
* docs: improve the home page and toc; use README.rst as a base;
add badges
* docs: fix C API documentation to work nicely with doxygen &
sphinx
* docs: meson: rebuild docs when Doxyfile.in changes
* docs: setup sphinx to use the graphviz extension
* docs: improve the visual appearence of the generated html and
cleanup
* docs: reorganize .rst files and add tables of contents for the
APIs
* meson: refactor docs + gi build system
* docs: build gobject introspection from xml files generated by Doxygen
* ci: replace hotdoc with Doxygen, Sphinx and Breathe tools
* docs: Add Lua API documentation
* docs: api: Replace hotdoc specific commands with Doxygen
specific commands
* docs: Replace hotdoc with Doxygen & Sphinx to generate
documentation
* pipewire-object-mixin: fix memleak in GList
* policy-endpoint-device: wait until previous links are activated
* m-si-standard-link: remove unused manage.lifetime configuration
property
* tests: enable si-standard-link test and port it to new API
* wplua: ref closure before invalidating it
* wpctl: fix iterator cleanup
* endpoint: remove wp_endpoint_create_link()
* scripts: remove static-sessions
* wp: remove WpSession and WpEndpointLink
* policy: don't link endpoints on startup
* m-default-nodes: check if node is valid before returning bound
id
* policy: reevaluate all linkables if one linkable was removed
* m-default-routes: log error message when failed to get current
routes
* m-default-profile: log error message when failed to get current
profile
* m-mixer-api: make sure the enum param iterator is valid
* pipewire-object-mixin: make sure enum params task is only
triggered once
* modules: steal the format_task before returning it
* systemd: Add conflicts with pipewire-media-session
* proxy: don't accept NULL pw_proxy in set_pw_proxy API
* m-device-activation: use sync API to enum available profiles
* m-default-routes: use sync API to enum available routes
* m-default-profile: use sync API to enum available profiles
* global-proxy: delay object creation until bound feature is
requested
* alsa-monitor: activate BOUND feature in JACK device
* tests: proxy: add a test for enum_params errors
* proxy: relax proxy error warning messages
* pw-object-mixin: watch for proxy errors during enum_params
* proxy: add a "bind" watch, to watch for proxy errors while
binding/exporting
* proxy: add error signal
* policy: fix removing of item links when linkable is removed
* tests: spa-pod: fix int64 constant to work on all architectures
* global-proxy: destroy the global when proxy is destroyed
* global-proxy: inherit from WpProxy when declaring class
* spa-pod: respect the SPA size for long and int APIs
* si-standard-link: configure the format in WpSiAdapters before
linking
* modules: implement WpSiAdapter in si-audio-adapter and
si-audio-endpoint
* si-interfaces: add WpSiAdapter interface to set and get session
item fortmat
* session-item: add _get_property API
* si-audio-adapter: remove unneeded 'preferred.n.channels'
property
* si-standard-link: make sure create_links creates at least 1
link
* modules: remove role and priority properties from
si-audio-adapter and si-node
* si-interfaces: rename WpSiPortInfo to WpSiLinkable
* scripts: cleaned and improved policy scripts
* create-item.lua: always enable monitor ports by default
* modules: remove 'monitor' port context from si-audio-adapter
and si-node
* release 0.3.95
* meson: depend on pipewire 0.3.26
* config: bluez: update to match media-session's
bluez-monitor.conf
* lua: rename Plugin() to Plugin.find()
* session-item: remove undefined API
* wp: remove WpSessionBin
* wp: rename debug.{h,c} to log.{h,c}
* config: disable ipc module by default and move it to the main
instance
* wpipc: place sockets in the same runtime directory as pipewire
* m-ipc: cleanup server using g_clear_pointer() for consistency
and safety
* wpipc: remove socket files after shutdown of the server
* meson: generate and install pkg-config file for wpipc
* meson: find threads_dep early and also use it in the
wpipc-client
* wpipc: use proper api & so versions
* meson: replace join_paths() with operator /
* meson: remove audiofade pipewire branch check
* meson: make wpipc optional and disabled by default
* policy-node: accept node names or paths in a stream's
node.target property
* policy-endpoint-client-links.lua: consider 'suspend.playback'
metadata
* modules: add ipc module
* lib: add wpipc library
* config: unify config and config-split
* systemd: add templated systemd unit files
* policy-endpoint: implement volume ducking
* m-mixer-api: track monitorVolumes and allow modifying them
* access: add a more generic "default" access policy script
* config: add an example of split-instance configuration
* Add a wp-uninstalled.sh script for easily running programs
uninstalled
* lua: remove the ability to specify spa_libs in the lua config
* daemon: init export core in the daemon and share it with
modules
* lua: change the "wireplumber.interactive" property to
"wireplumber.daemon"
* daemon: Use a pipewire-style config file to load initial
configuration
* core: use log.level from the pw_context
* log: factor out the log level configuration into
wp_log_level_set()
* audio-endpoint: configure adapter for null sink with
monitor.channel-volumes
* impl-node: implement WpPipewireObject
* device: debug and enhance spa device event handling
* config: policy: improve the endpoints & roles example config
* policy-endpoint-client: remove handling of move & follow and
endpoint priorities
* meson: bump version to 0.3.70
* m-mixer-api: allow calling the action signals even when the
plugin is not enabled
* m-default-nodes-api: remove reduntant call to g_clear_object
* wplua: store closures only with a weak reference
* examples: add example script to get the default sink's volume
* scripts: add policy for links between clients and endpoints
* lua: add WpObject get_active/supported_features() bindings
* lua: add g_get_real/monotonic_time() bindings
* si-audio-endpoint: give better descriptions to endpoints and
their null sinks
* static-endpoints: avoid capturing session item reference in
the activate closure
* policy: export endpoints, do not export endpoint links
* wpctl: handle endpoints nicely and enable volume controls on
them
* tools: split wireplumber script execution mode to a separate
wpexec tool
* tools: move under the 'src' directory
* src: scripts: rename policy-endpoint.lua to
policy-endpoint-client.lua
* m-audio-endpoint: remove target property
* static-endpoints.lua: don't export endpoints, only activate
them
* m-mixer-api: add configurable support for the cubic volume
scale
* wpctl: use mixer & default-nodes API modules
* m-mixer-api: also add channel-independent volume for ease of
use
* wpctl: remove obsolete default node/endpoint key macros
* m-mixer-api: fix getting volume info from nodes that don't
have volumeBase & step
* lua: add a Debug.dump_table() utility function
* m-default-nodes-api: load all information before declaring the
plugin as "enabled"
* lua: add a Core.require_api() utility function
* modules: add module-mixer-api
* src: config: do not create endpoints by default
* src: scripts: add policy-endpoint.lua script
* policy-node.lua: do not handle items with media role if
endpoints exist
* policy-node.lua: clean up findTarget function
* src: scripts: add static-endpoints.lua script
* modules: remove unneeded si-audio-convert module
* src: config: rename session-item support to default-policy
* create-item.lua: only create items for client and device
nodes
* policy-item.lua: only handle si-audio-adapter and si-nodes
links
* src: scripts: remove unneeded policy-endpoint.lua
* m-lua-scripting: add object manager get_n_objects API
* si-audio-endpoint: deactivate node when disabling active
feature
* m-si-audio-endpoint: fix port configuration and target
linking
* m-si-audio-endpoint: make target property optional
* tests: si-standard-link: sync core before finishing
* si-standard-link: call parent class finalize once finalized
* m-si-standard-link: properly set in item port context when
configuring
* policy-node.lua: fix param name typo when finding target
* policy-node: properly remove links between apps and capture
devices
* endpoint: remove useless pw_proxy_destroyed handlers
* registry: fix issues with dangling WpGlobal objects causing
assertion failures
* modules: use dots instead of dashes for session item properties
* wpctl: status: print nodes, ports, links grouped more nicely
* registry: fix odd assertion failures that occured from time to
time
* policy-node.lua: support config.move and config.follow
* m-si-audio-adapter: abort activation if node feature ports is
no longer enabled
* m-si-standard-link: make sure in/out items are valid before
activating
* wpctl: fix setting default nodes
* m-default-nodes: restore configured values on the metadata at
startup
* policy-node: use default-nodes-api plugin
* modules: add new module-default-nodes-api
* m-default-nodes: move common code to a new header
* m-default-nodes: add properties to control storage method and
interval
* modules: rename default-metadata to default-nodes and enable it
always in the config
* m-default-metadata: remove default endpoints, follow upstream
logic
* policy-node.lua: fix type mismatch when comparing session item
Ids
* lua: s/Feature.Object.ALL/Features.ALL/
* bluez config: update based on the latest media-session config
* m-default-metadata: add support for default audio nodes
* wpctl: list nodes and allow setting default nodes
* modules: remove endpoint impl on si-node, si-audio-convert and
si-audio-adapter
* tests: si-standard-link: use new si-audio-endpoint
* modules: add si-audio-endpoint session item
* src: scripts: add policy-node.lua to link port info session
items
* src: config: rename endpoint-support to session-item-support
* modules: remove si-monitor module
* src: scripts: add create-item.lua and remove
create-endpoint.lua
* m-si-standard-link: set out-item-id and in-item-id properties
* session-item: add id property
* m-si-audio-adapter: ensure ports are available before enabling
active
* m-lua-scripting: add get_associated_proxy session item Lua API
* si-interfaces: make WpSiLink work with WpSiPortInfo instead of
WpSiEndpoint
* si-interfaces: rename WpSiEndpointAcquisition to
WpSiAcquisition
* m-si-standard-link: use a weak reference for in and out
endpoints
* m-si-standard-link: fix in-endpoint check when configuring
* wplua: sort properties after transfering them from lua
* properties: add wp_properties_sort()
* monitor-alsa: add api.alsa.card.* properties on nodes
* bluez5: autoconnect bluetooth stream nodes
* object: deactivate only the features that were previously
active
* bluez5: use api.bluez5.connection-info
* m-si-convert: rename to si-audio-convert
* m-si-adapter: rename to si-audio-adapter
* tests: session-item: add registration test
* object-interest: add support for session item properties
* session-item: add _register and _remove API
* session-item: refactor and inherit from WpObject
* session-bin: remove unused wp_session_bin_new API
* lib: make WpImplEndpoint and WpImplEndpointLink public
* m-si-adapter: rename algorithms to audio-utils
* m-si-monitor-endpoint: rename to si-monitor
* m-si-simple-node-endpoint: rename to si-node
* lib: remove WpEndpointStream API
* wp_init: set PIPEWIRE_DEBUG
* spa-device: do not assert if the activation transition fails
* m-default-routes: return if default routes for a device are
not found
* m-default-routes: relax some warning logs to debug
* m-lua-script: add object_deactivate API
* m-lua-script: add closure for object_activate API
* object: add wp_object_activate_closure API
* ci: use 'disabled' instead of 'false' when configuring pipewire
* m-lua-scripting: add WpSessionBin add API
* lib: remove WpConfiguration
* lib: documentation fixes
* lua/api: add Link() constructor
* module-default-routes: store/restore route properties
* module-device-activation: apply default route on each new
device
* modules: add module-default-routes for storing/restoring routes
* lua/api: default Constraint type always to pw-global
* object-interest: remove type checks
* lua/api: simplify & improve session_item_configure
* lua/api: make the type optional when declaring Interest as a
function argument
* lua/api: improve getting optional Interest arguments
-------------------------------------------------------------------
Tue Mar 02 12:34:35 UTC 2021 - alarrosa@suse.com
- Update to version 0.3.60+git.20210301.6c2bfea:
* scripts: policy-endpoints: add move and follow options
* m-lua-scripting: add get_n_streams endpoint API
* m-lua-scripting: add lookup session API
* examples: add bt-profile-switch example
* lua/pod: don't crash on parsing objects with unknown keys,
just ignore them
-------------------------------------------------------------------
Fri Feb 26 16:12:01 UTC 2021 - alarrosa@suse.com
- Update to version 0.3.60+git.20210225.9f50117:
* lib: remove module.{c,h}
* meson: fix glib version requirement checks
* systemd: use the older version of the systemd pkgconfig
variables
* systemd: remove RuntimeDirectory from the system service
* daemon: add systemd unit files
* m-lua-scripting/pod: retrieve Ids in Array & Choice as
strings, if possible
* m-lua-scripting/pod: s/id_type/object_id/ as commented on !125
* m-lua-scripting: add support for choices when creating object
pods
* m-lua-scripting: refactor array and choice pod constructors to
accept Id names
* m-lua-scripting: allow constructing pod Ids with the Id name
* m-lua-scripting: set id_type field when parsing pod objects
* m-lua-scripting: set pod_type and value_type fieds when parsing
non-primitive pods
* m-lua-scripting: start indices from 1 when parsing pods
* test-endpoint: fix failure with pipewire master
* config: split flatpak access configuration
* scripts/access: update access scripts to call
update_permissions() cleanly
* lua/api: fix client update_permissions()
* examples: interactive.lua: add a shebang and update running
instructions
* lua: enable loading scripts with a shebang
* lua/api: log using a debug category unique for the calling
script file
* lua/api: ensure the function name in the debug output is
non-null
* monitor-alsa: fix node description on strange embedded devices
* suspend-node: honor "session.suspend-timeout-seconds"
* monitors: sanitize node descriptions too
* wplua: table_to_properties: use luaL_tolstring to do string
conversions
* config: bluez-monitor: add hfp_hf in the supported roles
comment
* m-lua-scripting: add WpPipewireObject api
* config: move loading of all audio support modules in
90-enable-audio-all
* config: split configuration for endpoints support in
config.lua.d
* monitors: drop the monitor- prefix from the filenames and
s/bluez5/bluez/
* config: make the monitor properties & rules available in global
tables
* config: load reserve-device only if alsa.reserve is true
* monitor-bluez: fix source priority assignment
* monitors: sanitize node names to match media-session's behavior
* wplua: gvariant_to_lua: convert dictionary keys to integers if
possible
* monitor-alsa: sync logic, properties and configuration with
media-session
* wplua: improve GVariant array conversion
* wplua: improve gvariant <-> lua conversion functions
* wplua: remove VARDICT handling in gvariant->lua conversion
* config: mimick media-session's v4l2-monitor.conf
* monitor-v4l2: copy properties and rules logic from
media-session
* config: immitate media-session's bluez-monitor.conf
* monitor-bluez: copy all properties and the rules functionality
from media-session
* lua/config: load split config files in alphanumeric order
* tests/lua: test monitor configuration rules code
* lua/api: add wp_object_interest_matches() binding
* object-interest: allow matching against WpProperties objects
* scripts: add portal access script
* scripts: add flatpak access lua script
* wplua: handle more GVariant cases
* m-lua-scripting: add WpClient LUA api
* Revert "meson: relax meson version dependency when building
with system lua"
* meson: relax meson version dependency when building with system
lua
* lua/pod: optimize push_primitive_values()
* tests/wplua: set WIREPLUMBER_CONFIG_DIR to an invalid directory
* lua/pod: simplify spa_pod_object_new()
* lua/pod: optimize lookups in primitive_lua_type and fix some
mistakes
* lua/pod: lookup the object type and values table only once when
constructing objects
* lua/pod: convert Id object fields to strings, if possible
* rename all foo_iterate APIs to foo_new_iterator
* m-lua-scripting/pod: push pod constructors using luaL_newlib
instead of manually
* modules: remove m-node-suspension
* m-lua-scripting/api: fix om:lookup() to return nil when no
object was found
* scripts: add suspend-node.lua to replace m-node-suspension
* wplua: fix enum <-> lua conversion
* create-endpoint.lua: fix some issues
* create-endpoint.lua: fix indentation
* node: change send_command() to take a string
* tests: wplua: add pod.lua script to validate pod API
* tests: wplua: add a script tester to validate lua scripts
* m-lua-scripting: add WpSpaPod api
* wplua: fix vtables lookup in boxed __index function
* examples: add an example interactive lua script
* m-lua-scripting/api: add wp_object_manager_iterate_filtered()
* proxy: add a method to query the interface type
* daemon: add a mode to execute lua scripts from the command line
* m-lua-scripting/api: add WpCore bindings
* m-lua-scripting/api: fix access to core in session_item_new()
* meson: bump version
* meson: remove C++ support, there's no C++ code anymore
* monitor-alsa: simplify reserve-device connection logic
* monitor-alsa: receive script configuration from config.lua
* scripts: add static-sessions.lua
* m-lua-scripting/api: add WpImplSession bindings
* m-lua-scripting: pass component arguments to scripts
* wplua: pass SANDBOX_CONFIG as a script argument
* wplua: allow exchanging arguments and results with scripts
* m-lua-scripting: use wplua_table_to_asv() instead of custom
function
* wplua: add GVariant dictionary conversion functions
* wptoml: remove, it's not used anymore
* daemon: refactor
* m-lua-scripting: fixes
* wp: add wp_get_data_dir()
* src: move scripts to their own directory, install in
$prefix/share/
* object-interest: add a NOT_EQUALS verb
* m-lua-scripting: allow queuing-in scripts without the plugin
being activated
* m-lua-scripting: refactor as a WpComponentLoader
* wplua: allow loading relative paths from wplua_load_path()
* wplua: add g_autoptr support to lua_State
* wplua: add flags to modify the sandbox behavior
* wp: export functions to get the module & config dirs
* lib: introduce WpComponentLoader and remove WpModule
* plugin: inherit from WpObject
* modules: remove modules that are obsoleted by the lua scripts
* modules: actually delete module-dbus-reservation.c
* monitor-alsa: add device reservation logic
* spa-device: add an "object-removed" signal
* lua: add wp_plugin_find binding
* modules: delete the old dbus-reservation module
* modules: implement a new reserve-device module
* plugin: add a method to find plugins easily
* conf: create-endpoint.lua: make sure endpoints always have a
valid name
* conf: create-endpoint.lua: use node id as key in session_items
table
* meson: add 'system-lua' project option to toggle the bundled
lua
* conf: disable legacy endpoint creation module and replace it
with lua script
* m-lua-scripting: add session item lua API
* session-item: add export API with closure
* session-item: add activate API with closure
* docs: update daemon/running.md
* m-lua-scripting: fix reference count in object manager's lookup
API
* object-interest: add _ref and _unref APIs
* config: enable lua scripts, disable legacy modules
* lua: fix some nasty memory leaks
* meson: require pipewire 0.3.20
* spa-device: handle DeviceEvent and configure node props
* m-lua-scripting: do stop the lua engine on deactivate()
* main: drop WpConfiguration reference early
* plugin: debug activation & deactivation
* wplua: object: unset GValues used when calling action signals
* config: add lua-based device monitors
* m-lua-scripting: add bindings required for device monitors
* impl-node: derive from WpProxy
* spa-device: derive from WpProxy and manage child objects
internally
* m-default-metadata: handle default nodes
* config: rename desktop profile to desktop-ep
* spa-pod: add the ability to specify Id properties as strings
* spa-type: refactor
* m-lua-scripting: handle default endpoints from the metadata
* m-config-policy: handle default endpoints from the metadata
* modules: replace session-settings with default-metadata
* wpctl: implement set-default using the metadata API
* meson: fix lua dependency on Arch Linux
* metadata: refactor API to quickly find a specific value
* state: use GKeyFile API to keep state in disk
* wp: remove initialization of wireplumber types
* session: remove default-endpoint-changed signal
* spa-type: fix param profile's last Id
* config: implement the functionality of config-policy in Lua
* m-lua-scripting: expose session, endpoint, endpoint-link APIs
* wplua: expose table to/from properties conversion functions
* object, pw-obj-mixin: fix warnings
* config: disable audio sink "streams"; they fail on latest
pipewire
* Fix compiler warnings that appear with the warning flags
enabled
* meson: enable compiler flags for warnings, if supported
* modules: implement module-lua-scripting
* wplua: use only the basename of the files for debug/error
messages
* wplua: use the error handler also when loading chunks
* wplua: implement __tostring for GObject
* wplua: use the registry to store vtables & closures
* wplua: remove TypeClass, push constructors as ClassName_new
* wplua: allow checking for a specific GType with
isobject/isboxed
* configuration: convert file paths from relative to absolute if
necessary
* configuration: implement grouping files in subdirectories
* wplua: add proper GError domain & error codes
* wplua: implement sandboxing of scripts
* wplua: convert WpProperties to table and vice versa
* wplua: new simple engine to integrate GObject with Lua
* meson: add dependency on lua 5.3
* tools: port wpctl to the new APIs
* tests: endpoint: re-enable the params unit test
* lib: delete WpProps
* pw-object-mixin: refactor, implement param caching and features
for impl objects
* iterator: add version field in the methods struct
* meson: bump project & API versions
* spa-pod: make the wrap functions public, remove private.h and
sort out the rest
* private: further cleanup of private.h, sort out header includes
* session-item: move wp_session_item_set_parent() to the public
header
* defs: add a new WP_PRIVATE_API function annotation
* iterator: make private stuff public, cleanup private.h further
* lib: move WpImplEndpoint* header parts to
private/impl-endpoint.h
* m-metadata: add callback for wp_object_activate()
* src: port daemon to the new APIs
* modules: port modules and their tests to the new proxy APIs
* object-manager: recursively store requested features on
children
* impl-endpoint{,-stream}: disable FEATURE_PROPS temporarily
* tests: fix library unit tests
* lib: refactor WpProxy
* lib: add new proxy-interfaces: interfaces for the refactored
WpProxy class
* lib/private: move the registry & global APIs to a separate
header
* lib: add new WpObject base class
-------------------------------------------------------------------
Wed Dec 30 13:19:27 UTC 2020 - Bjørn Lie <bjorn.lie@gmail.com>
- Disable testrun for 32bit arches, upstream do not care for them,
so we can not expect fixed tests any time soon.
-------------------------------------------------------------------
Fri Dec 18 20:22:35 UTC 2020 - bjorn.lie@gmail.com
- Update to version 0.3.0+37:
* m-endpoint-creation: remove undefined API
* m-endpoint-creation: remove unnused variable in Bluez5 endpoint
creation
* m-device-activation: use profile from default-profile module if
loaded
* modules: add module to store device profiles each time they
change
* lib: add new WpState API to save and load data from files
* m-monitor: add use-acp flag
* modules: refactor dbus reservation
* plugin: add name property
* wpctl: add set-profile option
* transition: stop and return error if cancelled by the
GCancellable
-------------------------------------------------------------------
Tue Oct 20 11:48:52 UTC 2020 - dimstar@opensuse.org
- Update to version 0.3.0+27:
* device: set parent type to GObject in WpSpaDevice structure
-------------------------------------------------------------------
Mon Oct 12 13:24:01 UTC 2020 - dimstar@opensuse.org
- Update to version 0.3.0+26:
* m-endpoint-creation: add bluez5 endpoint creation for bluetooth
devices
* m-config-endpoint: refactor and rename to endpoint-creation
* modules: add bluez5 endpoint session item
* modules: add fake stream session item
* m-si-adapter: use the adapter's name as stream name
* m-si-adapter: set the configured flag when configuration was
successful
* m-config-policy: set the stream name to the media role propery
by default
-------------------------------------------------------------------
Fri Sep 11 10:45:33 UTC 2020 - dimstar@opensuse.org
- Update to version 0.3.0+19:
* Implement PW_TYPE_INTERFACE_Metadata
* metadata: fix more coding style issues
* metadata: improve implementation
* metadata: remove WP_METADATA_FEATURES_STANDARD and fix
copyright years
* module-metadata: s/settings/plugin/
* modules: rename metadata module to just 'module-metadata'
* tests: fix permissions check failure with latest pipewire
* tests: implement a WpMetadata unit test
- Drop use-system-cpptoml.patch: fixed upstream.
-------------------------------------------------------------------
Mon Jul 20 12:27:44 UTC 2020 - Antonio Larrosa <alarrosa@suse.com>
- Initial version of wireplumber 0.3.0