Sync from SUSE:SLFO:Main wpa_supplicant revision 028f4479e72040ec2dc35c5c569d4118

.gitattributes

@@ -0,0 +1,23 @@
+## Default LFS
+*.7z filter=lfs diff=lfs merge=lfs -text
+*.bsp filter=lfs diff=lfs merge=lfs -text
+*.bz2 filter=lfs diff=lfs merge=lfs -text
+*.gem filter=lfs diff=lfs merge=lfs -text
+*.gz filter=lfs diff=lfs merge=lfs -text
+*.jar filter=lfs diff=lfs merge=lfs -text
+*.lz filter=lfs diff=lfs merge=lfs -text
+*.lzma filter=lfs diff=lfs merge=lfs -text
+*.obscpio filter=lfs diff=lfs merge=lfs -text
+*.oxt filter=lfs diff=lfs merge=lfs -text
+*.pdf filter=lfs diff=lfs merge=lfs -text
+*.png filter=lfs diff=lfs merge=lfs -text
+*.rpm filter=lfs diff=lfs merge=lfs -text
+*.tbz filter=lfs diff=lfs merge=lfs -text
+*.tbz2 filter=lfs diff=lfs merge=lfs -text
+*.tgz filter=lfs diff=lfs merge=lfs -text
+*.ttf filter=lfs diff=lfs merge=lfs -text
+*.txz filter=lfs diff=lfs merge=lfs -text
+*.whl filter=lfs diff=lfs merge=lfs -text
+*.xz filter=lfs diff=lfs merge=lfs -text
+*.zip filter=lfs diff=lfs merge=lfs -text
+*.zst filter=lfs diff=lfs merge=lfs -text

config

@@ -0,0 +1,640 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+CONFIG_EAP_EKE=y
+
+# MACsec
+CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+CONFIG_SAE=y
+
+# WPA3-Enterprise (SuiteB-192)
+CONFIG_SUITEB=y
+CONFIG_SUITEB192=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT@SECLEVEL=1"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.wpa_supplicant1)
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+# CONFIG_IEEE80211R=y
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+# CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+
+# Enable TDLS support
+CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
+
+# Enable Fast Session Transfer (FST)
+CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+CONFIG_ACS=y
+
+# Support Multi Band Operation
+CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+CONFIG_FILS=y
+# FILS shared key authentication with PFS
+CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+CONFIG_DPP=y
+# DPP version 2 support
+CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y

dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch

@@ -0,0 +1,46 @@
+From 903f0848ce7d67c99eb5a2569aa5c31bcd7adbc1 Mon Sep 17 00:00:00 2001
+From: Clemens Famulla-Conrad <cfamullaconrad@suse.de>
+Date: Tue, 5 Jul 2022 13:04:52 +0200
+Subject: [PATCH] dbus: Fix property DebugShowKeys and DebugTimestamp
+
+It is possible to specify -t or -K multiple times. With this the
+value isn't boolean anymore and we hit a assert in libdbus
+function `dbus_message_iter_append_basic()`, which expect 0 or 1
+for DBUS_TYPE_BOOLEAN.
+
+Signed-off-by: Clemens Famulla-Conrad <cfamullaconrad@suse.de>
+---
+ wpa_supplicant/dbus/dbus_new_handlers.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
+index 0b1002bf1..de82930e8 100644
+--- a/wpa_supplicant/dbus/dbus_new_handlers.c
++++ b/wpa_supplicant/dbus/dbus_new_handlers.c
+@@ -908,8 +908,10 @@ dbus_bool_t wpas_dbus_getter_debug_timestamp(
+ 	const struct wpa_dbus_property_desc *property_desc,
+ 	DBusMessageIter *iter, DBusError *error, void *user_data)
+ {
++	dbus_bool_t b = wpa_debug_timestamp ? TRUE : FALSE;
++
+ 	return wpas_dbus_simple_property_getter(iter, DBUS_TYPE_BOOLEAN,
+-						&wpa_debug_timestamp, error);
++						&b, error);
+ 
+ }
+ 
+@@ -927,8 +929,10 @@ dbus_bool_t wpas_dbus_getter_debug_show_keys(
+ 	const struct wpa_dbus_property_desc *property_desc,
+ 	DBusMessageIter *iter, DBusError *error, void *user_data)
+ {
++	dbus_bool_t b = wpa_debug_timestamp ? TRUE : FALSE;
++
+ 	return wpas_dbus_simple_property_getter(iter, DBUS_TYPE_BOOLEAN,
+-						&wpa_debug_show_keys, error);
++						&b, error);
+ 
+ }
+ 
+-- 
+2.35.3
+

fi.epitest.hostap.WPASupplicant.service

@@ -0,0 +1,5 @@
+[D-BUS Service]
+Name=fi.epitest.hostap.WPASupplicant
+Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -t -f /var/log/wpa_supplicant.log
+User=root
+SystemdService=wpa_supplicant.service

fi.w1.wpa_supplicant1.service

@@ -0,0 +1,5 @@
+[D-BUS Service]
+Name=fi.w1.wpa_supplicant1
+Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -t -f /var/log/wpa_supplicant.log
+User=root
+SystemdService=wpa_supplicant.service

logrotate.wpa_supplicant

@@ -0,0 +1,10 @@
+/var/log/wpa_supplicant.log {
+    compress
+    dateext
+    maxage 365
+    rotate 99
+    missingok
+    notifempty
+    size +4096k
+    copytruncate
+}

wpa_supplicant-alloc_size.patch

@@ -0,0 +1,22 @@
+Index: wpa_supplicant-2.10/src/utils/os.h
+===================================================================
+--- wpa_supplicant-2.10.orig/src/utils/os.h
++++ wpa_supplicant-2.10/src/utils/os.h
+@@ -260,7 +260,7 @@ int os_fdatasync(FILE *stream);
+  *
+  * Caller is responsible for freeing the returned buffer with os_free().
+  */
+-void * os_zalloc(size_t size);
++void * os_zalloc(size_t size) __attribute((malloc, alloc_size(1)));
+ 
+ /**
+  * os_calloc - Allocate and zero memory for an array
+@@ -274,6 +274,8 @@ void * os_zalloc(size_t size);
+  *
+  * Caller is responsible for freeing the returned buffer with os_free().
+  */
++
++__attribute((malloc, alloc_size(1,2)))
+ static inline void * os_calloc(size_t nmemb, size_t size)
+ {
+ 	if (size && nmemb > (~(size_t) 0) / size)

wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff

@@ -0,0 +1,77 @@
+From f40c1d989762c4f3b585c86ca5d9a216d120fa12 Mon Sep 17 00:00:00 2001
+From: Ludwig Nussel <ludwig.nussel@suse.de>
+Date: Fri, 16 Sep 2011 11:41:16 +0200
+Subject: [PATCH] dump certificate as PEM in debug mode
+
+---
+ src/crypto/tls_openssl.c | 13 +++++++++++++
+ src/utils/wpa_debug.c    |  5 +++++
+ src/utils/wpa_debug.h    |  8 ++++++++
+ 3 files changed, 26 insertions(+)
+
+Index: wpa_supplicant-2.10/src/crypto/tls_openssl.c
+===================================================================
+--- wpa_supplicant-2.10.orig/src/crypto/tls_openssl.c
++++ wpa_supplicant-2.10/src/crypto/tls_openssl.c
+@@ -2361,6 +2361,19 @@ static int tls_verify_cb(int preverify_o
+ 	debug_print_cert(err_cert, buf);
+ 	X509_NAME_oneline(X509_get_subject_name(err_cert), buf, sizeof(buf));
+ 
++	if (wpa_debug_enabled(MSG_DEBUG)) {
++		long len;
++		char* data = NULL;
++		BIO* bio = BIO_new(BIO_s_mem());
++		//X509_print_ex(bio, err_cert, (XN_FLAG_MULTILINE|ASN1_STRFLGS_UTF8_CONVERT)&~ASN1_STRFLGS_ESC_MSB, 0);
++		PEM_write_bio_X509(bio, err_cert);
++		len = BIO_get_mem_data(bio, &data);
++		if (len) {
++			wpa_printf(MSG_DEBUG, "OpenSSL certificate at depth %d:\n%*s", depth, (int)len, data);
++		}
++		BIO_free(bio);
++	}
++
+ 	conn = SSL_get_app_data(ssl);
+ 	if (conn == NULL)
+ 		return 0;
+Index: wpa_supplicant-2.10/src/utils/wpa_debug.c
+===================================================================
+--- wpa_supplicant-2.10.orig/src/utils/wpa_debug.c
++++ wpa_supplicant-2.10/src/utils/wpa_debug.c
+@@ -66,6 +66,11 @@ static int wpa_to_android_level(int leve
+ #endif /* CONFIG_DEBUG_FILE */
+ 
+ 
++int wpa_debug_enabled(int level)
++{
++	return level >= wpa_debug_level;
++}
++
+ void wpa_debug_print_timestamp(void)
+ {
+ #ifndef CONFIG_ANDROID_LOG
+Index: wpa_supplicant-2.10/src/utils/wpa_debug.h
+===================================================================
+--- wpa_supplicant-2.10.orig/src/utils/wpa_debug.h
++++ wpa_supplicant-2.10/src/utils/wpa_debug.h
+@@ -25,6 +25,7 @@ enum {
+ 
+ #ifdef CONFIG_NO_STDOUT_DEBUG
+ 
++#define wpa_debug_enabled(x) do { } while (0)
+ #define wpa_debug_print_timestamp() do { } while (0)
+ #define wpa_printf(args...) do { } while (0)
+ #define wpa_hexdump(l,t,b,le) do { } while (0)
+@@ -51,6 +52,13 @@ void wpa_debug_close_file(void);
+ void wpa_debug_setup_stdout(void);
+ 
+ /**
++ * wpa_debug_enabled: check whether given debug level is enabled
++ * @level: priority level (MSG_*) of the message
++ * @return: 0 or 1
++ */
++int wpa_debug_enabled(int level);
++
++/**
+  * wpa_debug_printf_timestamp - Print timestamp for debug output
+  *
+  * This function prints a timestamp in seconds_from_1970.microsoconds

wpa_supplicant-flush-debug-output.patch

@@ -0,0 +1,56 @@
+Index: wpa_supplicant-2.10/src/utils/wpa_debug.c
+===================================================================
+--- wpa_supplicant-2.10.orig/src/utils/wpa_debug.c
++++ wpa_supplicant-2.10/src/utils/wpa_debug.c
+@@ -76,9 +76,11 @@ void wpa_debug_print_timestamp(void)
+ 
+ 	os_get_time(&tv);
+ #ifdef CONFIG_DEBUG_FILE
+-	if (out_file)
++	if (out_file) {
+ 		fprintf(out_file, "%ld.%06u: ", (long) tv.sec,
+ 			(unsigned int) tv.usec);
++                fflush(out_file);
++        }
+ #endif /* CONFIG_DEBUG_FILE */
+ 	if (!out_file && !wpa_debug_syslog)
+ 		printf("%ld.%06u: ", (long) tv.sec, (unsigned int) tv.usec);
+@@ -231,6 +233,7 @@ void wpa_printf(int level, const char *f
+ 			vfprintf(out_file, fmt, ap);
+ 			fprintf(out_file, "\n");
+ 			va_end(ap);
++                        fflush(out_file);
+ 		}
+ #endif /* CONFIG_DEBUG_FILE */
+ 		if (!wpa_debug_syslog && !out_file) {
+@@ -365,6 +368,7 @@ static void _wpa_hexdump(int level, cons
+ 			fprintf(out_file, " [REMOVED]");
+ 		}
+ 		fprintf(out_file, "\n");
++                fflush(out_file);
+ 	}
+ #endif /* CONFIG_DEBUG_FILE */
+ 	if (!wpa_debug_syslog && !out_file) {
+@@ -436,12 +440,14 @@ static void _wpa_hexdump_ascii(int level
+ 			fprintf(out_file,
+ 				"%s - hexdump_ascii(len=%lu): [REMOVED]\n",
+ 				title, (unsigned long) len);
++                        fflush(out_file);
+ 			goto file_done;
+ 		}
+ 		if (buf == NULL) {
+ 			fprintf(out_file,
+ 				"%s - hexdump_ascii(len=%lu): [NULL]\n",
+ 				title, (unsigned long) len);
++                        fflush(out_file);
+ 			goto file_done;
+ 		}
+ 		fprintf(out_file, "%s - hexdump_ascii(len=%lu):\n",
+@@ -466,6 +472,7 @@ static void _wpa_hexdump_ascii(int level
+ 			pos += llen;
+ 			len -= llen;
+ 		}
++                fflush(out_file);
+ 	}
+ file_done:
+ #endif /* CONFIG_DEBUG_FILE */

wpa_supplicant-sigusr1-changes-debuglevel.patch

@@ -0,0 +1,40 @@
+---
+ wpa_supplicant/wpa_supplicant.c |   18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+Index: wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant.c
+===================================================================
+--- wpa_supplicant-2.10.orig/wpa_supplicant/wpa_supplicant.c
++++ wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant.c
+@@ -121,6 +121,22 @@ const char *const wpa_supplicant_full_li
+ "\n";
+ #endif /* CONFIG_NO_STDOUT_DEBUG */
+ 
++static void wpa_supplicant_handle_sigusr1(int sig,
++				     void *signal_ctx)
++{
++	/* Increase verbosity (by decreasing the debug level) and wrap back
++	 * to MSG_INFO when needed.
++	 */
++	if (wpa_debug_level)
++		wpa_debug_level--;
++	else
++		wpa_debug_level = MSG_INFO;
++	
++	wpa_printf(MSG_INFO, "Signal %d received - changing debug level to %s", sig,
++	           (wpa_debug_level == MSG_INFO) ? "INFO" :
++	               ((wpa_debug_level == MSG_DEBUG) ? "DEBUG" :
++	                   ((wpa_debug_level == MSG_MSGDUMP) ? "MSGDUMP" : "UNKNOWN")));
++}
+ 
+ static void wpa_bss_tmp_disallow_timeout(void *eloop_ctx, void *timeout_ctx);
+ #if defined(CONFIG_FILS) && defined(IEEE8021X_EAPOL)
+@@ -7474,6 +7490,8 @@ int wpa_supplicant_run(struct wpa_global
+ 	eloop_register_signal_terminate(wpa_supplicant_terminate, global);
+ 	eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
+ 
++	eloop_register_signal(SIGUSR1, wpa_supplicant_handle_sigusr1, NULL);
++
+ 	eloop_run();
+ 
+ 	return 0;

wpa_supplicant.conf

@@ -0,0 +1,3 @@
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+

wpa_supplicant.service

@@ -0,0 +1,24 @@
+[Unit]
+Description=WPA Supplicant daemon
+After=dbus.service
+Before=network-pre.target
+Wants=network-pre.target
+
+[Service]
+# added automatically, for details please see
+# https://en.opensuse.org/openSUSE:Security_Features#Systemd_hardening_effort
+ProtectSystem=full
+ProtectHome=read-only
+ProtectHostname=true
+ProtectKernelTunables=true
+ProtectKernelModules=true
+ProtectKernelLogs=true
+ProtectControlGroups=true
+RestrictRealtime=true
+# end of automatic additions 
+Type=dbus
+BusName=fi.w1.wpa_supplicant1
+ExecStart=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -t -f /var/log/wpa_supplicant.log
+
+[Install]
+WantedBy=multi-user.target

wpa_supplicant.spec

@@ -0,0 +1,174 @@
+#
+# spec file for package wpa_supplicant
+#
+# Copyright (c) 2022 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+#
+
+
+Name:           wpa_supplicant
+Version:        2.10
+Release:        0
+Summary:        WPA supplicant implementation
+License:        BSD-3-Clause AND GPL-2.0-or-later
+URL:            https://w1.fi/wpa_supplicant
+Source0:        https://w1.fi/releases/%{name}-%{version}.tar.gz
+Source1:        config
+Source2:        %{name}.conf
+Source3:        fi.epitest.hostap.WPASupplicant.service
+Source4:        logrotate.wpa_supplicant
+Source5:        fi.w1.wpa_supplicant1.service
+Source6:        wpa_supplicant.service
+Source7:        wpa_supplicant@.service
+# wpa_supplicant-flush-debug-output.patch won't go upstream as it might
+# change timings
+Patch1:         wpa_supplicant-flush-debug-output.patch
+# wpa_supplicant-sigusr1-changes-debuglevel.patch won't go upstream as it
+# is not portable
+Patch2:         wpa_supplicant-sigusr1-changes-debuglevel.patch
+Patch3:         wpa_supplicant-alloc_size.patch
+Patch5:         wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff
+Patch6:         dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch
+BuildRequires:  pkgconfig
+BuildRequires:  readline-devel
+BuildRequires:  systemd-rpm-macros
+BuildRequires:  pkgconfig(Qt5Core)
+BuildRequires:  pkgconfig(Qt5Gui)
+BuildRequires:  pkgconfig(Qt5Widgets)
+BuildRequires:  pkgconfig(dbus-1)
+BuildRequires:  pkgconfig(libnl-3.0)
+BuildRequires:  pkgconfig(openssl)
+Requires:       logrotate
+
+%description
+wpa_supplicant is an implementation of the WPA Supplicant component,
+i.e., the part that runs in the client stations. It implements key
+negotiation with a WPA Authenticator and it controls the roaming and
+IEEE 802.11 authentication/association of the wlan driver.
+
+%package gui
+Summary:        WPA supplicant graphical front-end
+Requires:       wpa_supplicant
+
+%description gui
+This package contains a graphical front-end to wpa_supplicant, an
+implementation of the WPA Supplicant component.
+
+%prep
+%setup -q -n wpa_supplicant-%{version}
+cp %{SOURCE1} wpa_supplicant/.config
+%autopatch -p1
+
+%build
+cd wpa_supplicant
+CFLAGS="%{optflags}" make V=1 %{?_smp_mflags}
+CFLAGS="%{optflags}" make V=1 %{?_smp_mflags} eapol_test
+cd wpa_gui-qt4
+%qmake5
+make %{?_smp_mflags}
+
+%install
+install -d %{buildroot}/%{_sbindir}
+install -m 0755 wpa_supplicant/wpa_cli %{buildroot}%{_sbindir}
+install -m 0755 wpa_supplicant/wpa_passphrase %{buildroot}%{_sbindir}
+install -m 0755 wpa_supplicant/wpa_supplicant %{buildroot}%{_sbindir}
+install -m 0755 wpa_supplicant/eapol_test %{buildroot}%{_sbindir}
+install -d %{buildroot}%{_datadir}/dbus-1/system.d
+install -m 0644 wpa_supplicant/dbus/dbus-wpa_supplicant.conf %{buildroot}%{_datadir}/dbus-1/system.d/wpa_supplicant.conf
+install -d %{buildroot}/%{_sysconfdir}/%{name}
+install -m 0600 %{SOURCE2} %{buildroot}/%{_sysconfdir}/%{name}
+install -d %{buildroot}/%{_datadir}/dbus-1/system-services
+install -m 0644 %{SOURCE3} %{buildroot}/%{_datadir}/dbus-1/system-services
+install -m 0644 %{SOURCE5} %{buildroot}/%{_datadir}/dbus-1/system-services
+%if 0%{?suse_version} > 1500
+install -d %{buildroot}/%{_distconfdir}/logrotate.d/
+install -m 644 %{SOURCE4} %{buildroot}/%{_distconfdir}/logrotate.d/wpa_supplicant
+%else
+install -d %{buildroot}/%{_sysconfdir}/logrotate.d/
+install -m 644 %{SOURCE4} %{buildroot}/%{_sysconfdir}/logrotate.d/wpa_supplicant
+%endif
+install -d %{buildroot}/%{_rundir}/%{name}
+install -d %{buildroot}%{_mandir}/man{5,8}
+install -m 0644 wpa_supplicant/doc/docbook/*.8 %{buildroot}%{_mandir}/man8
+#  wpa_supplicant is built without CONFIG_PRIVSEP
+rm %{buildroot}%{_mandir}/man8/wpa_priv.*
+install -m 0644 wpa_supplicant/doc/docbook/*.5 %{buildroot}%{_mandir}/man5
+install -m 755 wpa_supplicant/wpa_gui-qt4/wpa_gui %{buildroot}%{_sbindir}
+install -d %{buildroot}%{_unitdir}
+install -m 0644 %{SOURCE6} %{buildroot}%{_unitdir}
+install -m 0644 %{SOURCE7} %{buildroot}%{_unitdir}
+ln -s service %{buildroot}/%{_sbindir}/rcwpa_supplicant
+# avoid spurious dependency on /usr/bin/python
+chmod -x wpa_supplicant/examples/*.py
+# dbus auto activation boo#966535
+ln -s wpa_supplicant.service %{buildroot}%{_unitdir}/dbus-fi.epitest.hostap.WPASupplicant.service
+ln -s wpa_supplicant.service %{buildroot}%{_unitdir}/dbus-fi.w1.wpa_supplicant1.service
+
+%pre
+%service_add_pre wpa_supplicant.service
+%if 0%{?suse_version} > 1500
+# Prepare for migration to /usr/etc; save any old .rpmsave
+for i in logrotate.d/wpa_supplicant ; do
+   test -f %{_sysconfdir}/${i}.rpmsave && mv -v %{_sysconfdir}/${i}.rpmsave %{_sysconfdir}/${i}.rpmsave.old ||:
+done
+%endif
+
+%if 0%{?suse_version} > 1500
+%posttrans
+# Migration to /usr/etc, restore just created .rpmsave
+for i in logrotate.d/wpa_supplicant ; do
+   test -f %{_sysconfdir}/${i}.rpmsave && mv -v %{_sysconfdir}/${i}.rpmsave %{_sysconfdir}/${i} ||:
+done
+%endif
+
+%post
+%service_add_post wpa_supplicant.service
+
+%preun
+%service_del_preun wpa_supplicant.service
+
+%postun
+%service_del_postun wpa_supplicant.service
+
+%files
+%license COPYING
+%doc wpa_supplicant/ChangeLog README wpa_supplicant/todo.txt wpa_supplicant/examples wpa_supplicant/wpa_supplicant.conf
+%{_sbindir}/eapol_test
+%{_sbindir}/rcwpa_supplicant
+%{_sbindir}/wpa_cli
+%{_sbindir}/wpa_passphrase
+%{_sbindir}/wpa_supplicant
+%{_datadir}/dbus-1/system.d/%{name}.conf
+%{_datadir}/dbus-1/system-services
+%config %{_sysconfdir}/%{name}/%{name}.conf
+%if 0%{?suse_version} > 1500
+%{_distconfdir}/logrotate.d/wpa_supplicant
+%else
+%config(noreplace) %{_sysconfdir}/logrotate.d/wpa_supplicant
+%endif
+%dir %{_rundir}/%{name}
+%ghost %{_rundir}/%{name}
+%{_unitdir}/wpa_supplicant.service
+%{_unitdir}/wpa_supplicant@.service
+%{_unitdir}/dbus-fi.epitest.hostap.WPASupplicant.service
+%{_unitdir}/dbus-fi.w1.wpa_supplicant1.service
+%dir %{_sysconfdir}/%{name}
+%{_mandir}/man8/*
+%exclude %{_mandir}/man8/wpa_gui.*
+%{_mandir}/man5/*
+
+%files gui
+%{_sbindir}/wpa_gui
+%{_mandir}/man8/wpa_gui*
+
+%changelog

wpa_supplicant@.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=WPA Supplicant daemon (interface %i)
+After=dbus.service network.target
+Requires=sys-subsystem-net-devices-%I.device
+After=sys-subsystem-net-devices-%I.device
+
+[Service]
+Type=dbus
+BusName=fi.w1.wpa_supplicant1
+ExecStart=/usr/sbin/wpa_supplicant -i%i -c /etc/wpa_supplicant/wpa_supplicant.conf -u -t -f /var/log/wpa_supplicant.log
+
+[Install]
+WantedBy=multi-user.target