dfaggioli/qemu
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
50f43f0ff9a640b901b2657492d642e14a57bd4d
qemu/tcg/mips/tcg-target.h

146 lines
4.5 KiB
C
Raw Normal View History

tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/*
* Tiny Code Generator for QEMU
*
* Copyright (c) 2008-2009 Arnaud Patard <arnaud.patard@rtp-net.org>
* Copyright (c) 2009 Aurelien Jarno <aurelien@aurel32.net>
* Based on i386/tcg-target.c - Copyright (c) 2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
janitor: add guards to headers Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06 12:15:58 +01:00
#ifndef TCG_TARGET_MIPS
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#define TCG_TARGET_MIPS 1
tcg-mips: Define TCG_TARGET_INSN_UNIT_SIZE And use tcg pointer differencing functions as appropriate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-25 19:22:44 +00:00
#define TCG_TARGET_INSN_UNIT_SIZE 4
tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-05 09:18:22 +02:00
#define TCG_TARGET_TLB_DISPLACEMENT_BITS 16
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#define TCG_TARGET_NB_REGS 32
tcg: Standardize on TCGReg as the enum for hard registers Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-09 08:03:33 +00:00
typedef enum {
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
TCG_REG_ZERO = 0,
TCG_REG_AT,
TCG_REG_V0,
TCG_REG_V1,
TCG_REG_A0,
TCG_REG_A1,
TCG_REG_A2,
TCG_REG_A3,
TCG_REG_T0,
TCG_REG_T1,
TCG_REG_T2,
TCG_REG_T3,
TCG_REG_T4,
TCG_REG_T5,
TCG_REG_T6,
TCG_REG_T7,
TCG_REG_S0,
TCG_REG_S1,
TCG_REG_S2,
TCG_REG_S3,
TCG_REG_S4,
TCG_REG_S5,
TCG_REG_S6,
TCG_REG_S7,
TCG_REG_T8,
TCG_REG_T9,
TCG_REG_K0,
TCG_REG_K1,
TCG_REG_GP,
TCG_REG_SP,
tcg-mips: Rearrange register allocation Use FP (also known as S8) as a normal call-saved register. Include T0 in the allocation order and call-clobbered list even though it's currently used as a TCG temporary. Put the argument registers at the end of the allocation order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-15 09:03:59 -07:00
TCG_REG_S8,
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
TCG_REG_RA,
tcg-mips: Rearrange register allocation Use FP (also known as S8) as a normal call-saved register. Include T0 in the allocation order and call-clobbered list even though it's currently used as a TCG temporary. Put the argument registers at the end of the allocation order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-15 09:03:59 -07:00
TCG_REG_CALL_STACK = TCG_REG_SP,
TCG_AREG0 = TCG_REG_S0,
tcg: Standardize on TCGReg as the enum for hard registers Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-09 08:03:33 +00:00
} TCGReg;
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/* used for function call generation */
#define TCG_TARGET_STACK_ALIGN 8
#define TCG_TARGET_CALL_STACK_OFFSET 16
#define TCG_TARGET_CALL_ALIGN_ARGS 1
tcg/mips: detect available host instructions at runtime Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-15 17:57:59 +02:00
/* MOVN/MOVZ instructions detection */
#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 1)) || \
defined(_MIPS_ARCH_LOONGSON2E) || defined(_MIPS_ARCH_LOONGSON2F) || \
defined(_MIPS_ARCH_MIPS4)
#define use_movnz_instructions 1
#else
extern bool use_movnz_instructions;
#endif
/* MIPS32 instruction set detection */
#if defined(__mips_isa_rev) && (__mips_isa_rev >= 1)
#define use_mips32_instructions 1
#else
extern bool use_mips32_instructions;
#endif
/* MIPS32R2 instruction set detection */
#if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
#define use_mips32r2_instructions 1
#else
extern bool use_mips32r2_instructions;
#endif
tcg/mips: Add use_mips32r6_instructions definition Add definition use_mips32r6_instructions to the MIPS TCG backend which is constant 1 when built for MIPS release 6. This will be used to decide between pre-R6 and R6 instruction encodings. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-4-git-send-email-james.hogan@imgtec.com>
2015-10-02 13:24:14 +01:00
/* MIPS32R6 instruction set detection */
#if defined(__mips_isa_rev) && (__mips_isa_rev >= 6)
#define use_mips32r6_instructions 1
#else
#define use_mips32r6_instructions 0
#endif
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/* optional instructions */
tcg: Always define all of the TCGOpcode enum members. By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-17 14:11:46 -07:00
#define TCG_TARGET_HAS_div_i32 1
tcg: Split rem requirement from div requirement There are several hosts with only a "div" insn. Remainder is computed manually from the quotient and inputs. We can do this generically. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-03-11 22:41:47 -07:00
#define TCG_TARGET_HAS_rem_i32 1
tcg: Always define all of the TCGOpcode enum members. By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-17 14:11:46 -07:00
#define TCG_TARGET_HAS_not_i32 1
#define TCG_TARGET_HAS_nor_i32 1
#define TCG_TARGET_HAS_andc_i32 0
#define TCG_TARGET_HAS_orc_i32 0
#define TCG_TARGET_HAS_eqv_i32 0
#define TCG_TARGET_HAS_nand_i32 0
tcg/mips: Support r6 multiply/divide encodings MIPSr6 adds several new integer multiply, divide, and modulo instructions, and removes several pre-r6 encodings, along with the HI/LO registers which were the implicit operands of some of those instructions. Update TCG to use the new instructions when built for r6. The new instructions actually map much more directly to the TCG ops, as they only provide a single 32-bit half of the result and in a normal general purpose register instead of HI or LO. The mulu2_i32 and muls2_i32 operations are no longer appropriate for r6, so they are removed from the TCG opcode table. This is because they would need to emit two separate host instructions anyway (for the high and low half of the result), which TCG can arrange automatically for us in the absense of mulu2_i32/muls2_i32 by splitting it into mul_i32 and mul*h_i32 TCG ops. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-6-git-send-email-james.hogan@imgtec.com>
2015-10-02 13:24:16 +01:00
#define TCG_TARGET_HAS_mulu2_i32 (!use_mips32r6_instructions)
#define TCG_TARGET_HAS_muls2_i32 (!use_mips32r6_instructions)
tcg-mips: Implement mulsh, muluh With the optimization in tcg_liveness_analysis, we can avoid the MFLO when it is unused. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-14 14:41:43 -07:00
#define TCG_TARGET_HAS_muluh_i32 1
#define TCG_TARGET_HAS_mulsh_i32 1
tcg/mips: implement movcond op on MIPS32R2 movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
tcg/mips: detect available host instructions at runtime Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-15 17:57:59 +02:00
/* optional instructions detected at runtime */
#define TCG_TARGET_HAS_movcond_i32 use_movnz_instructions
#define TCG_TARGET_HAS_bswap16_i32 use_mips32r2_instructions
#define TCG_TARGET_HAS_bswap32_i32 use_mips32r2_instructions
#define TCG_TARGET_HAS_deposit_i32 use_mips32r2_instructions
tcg/mips: only enable ext8s/ext16s ops on MIPS32R2 On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-15 17:57:59 +02:00
#define TCG_TARGET_HAS_ext8s_i32 use_mips32r2_instructions
#define TCG_TARGET_HAS_ext16s_i32 use_mips32r2_instructions
tcg/mips: detect available host instructions at runtime Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-15 17:57:59 +02:00
#define TCG_TARGET_HAS_rot_i32 use_mips32r2_instructions
tcg/mips: optimize bswap{16,16s,32} on MIPS32R2 bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 18:20:26 +02:00
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
/* optional instructions automatically implemented */
tcg: Always define all of the TCGOpcode enum members. By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-17 14:11:46 -07:00
#define TCG_TARGET_HAS_neg_i32 0 /* sub rd, zero, rt */
#define TCG_TARGET_HAS_ext8u_i32 0 /* andi rt, rs, 0xff */
#define TCG_TARGET_HAS_ext16u_i32 0 /* andi rt, rs, 0xffff */
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD. Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-25 23:06:00 -04:00
#ifdef __OpenBSD__
#include <machine/sysarch.h>
#else
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
#include <sys/cachectl.h>
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD. Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-25 23:06:00 -04:00
#endif
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
tcg: Change flush_icache_range arguments to uintptr_t Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-20 14:22:50 -07:00
static inline void flush_icache_range(uintptr_t start, uintptr_t stop)
tcg: initial mips support Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-17 14:17:47 +02:00
{
cacheflush ((void *)start, stop-start, ICACHE);
}
janitor: add guards to headers Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06 12:15:58 +01:00
#endif
Reference in New Issue Copy Permalink