dfaggioli/qemu
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
72a7c47393b41e406492e257a85589a75476b385
qemu/include/hw/arm/aspeed_soc.h

186 lines
4.5 KiB
C
Raw Normal View History

hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
/*
ast2400: replace ast2400 with aspeed_soc This is a name replacement to prepare ground for other SoCs. Let's also remove the AST2400_SMC_BASE definition from the address space mappings, as it is not used. This controller was removed from the Aspeed SoC AST2500, so this provides us a better common base for the address space mapping on both SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
* ASPEED SoC family
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
*
* Andrew Jeffery <andrew@aj.id.au>
*
* Copyright 2016 IBM Corp.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
*/
ast2400: replace ast2400 with aspeed_soc This is a name replacement to prepare ground for other SoCs. Let's also remove the AST2400_SMC_BASE definition from the address space mappings, as it is not used. This controller was removed from the Aspeed SoC AST2500, so this provides us a better common base for the address space mapping on both SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
#ifndef ASPEED_SOC_H
#define ASPEED_SOC_H
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
aspeed/soc: Add AST2600 support Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:43 +02:00
#include "hw/cpu/a15mpcore.h"
aspeed/soc : Add AST1030 support The embedded core of AST1030 SoC is ARM Coretex M4. It is hard to be integrated in the common Aspeed Soc framework. We introduce a new ast1030 class with instance_init and realize handlers. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ] Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02 17:03:03 +02:00
#include "hw/arm/armv7m.h"
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
#include "hw/intc/aspeed_vic.h"
ast2400: Integrate the SCU model and set silicon revision By specifying the silicon revision we select the appropriate reset values for the SoC. Additionally, expose hardware strapping properties aliasing those provided by the SCU for board-specific configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1466744305-23163-3-git-send-email-andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-27 15:37:33 +01:00
#include "hw/misc/aspeed_scu.h"
hw/arm: Integrate ADC model into Aspeed SoC Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211005052604.1674891-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12 08:20:08 +02:00
#include "hw/adc/aspeed_adc.h"
ast2400: add a memory controller device model The uboot in the previous release of the SDK was using a hardcoded value for memory size. This is not true anymore, the value is now retrieved from the memory controller. Below is a model for this device, only supporting unlock and configuration. Without it, we endup running a guest with 64MB, which is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to build a default value. Some bits should be linked to SCU strapping registers but it seems a bit complex to add for the current need. The model is ready for the AST2500 SOC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-06 19:52:17 +01:00
#include "hw/misc/aspeed_sdmc.h"
hw/misc/aspeed_xdma: New device The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:18 +01:00
#include "hw/misc/aspeed_xdma.h"
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
#include "hw/timer/aspeed_timer.h"
hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-12-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-04 01:04:01 +02:00
#include "hw/rtc/aspeed_rtc.h"
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:29 +01:00
#include "hw/i2c/aspeed_i2c.h"
hw/arm/aspeed: Add the i3c device to the AST2600 SoC Add the new i3c device to the AST2600 SoC. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-3-troy_lee@aspeedtech.com [PMM: tidied commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 16:45:46 +08:00
#include "hw/misc/aspeed_i3c.h"
ast2400: add SMC controllers (FMC and SPI) The Aspeed AST2400 soc includes a static memory controller for the BMC which supports NOR, NAND and SPI flash memory modules. This controller has two modes : the SMC for the legacy interface which supports only one module and the FMC for the new interface which supports up to five modules. The AST2400 also includes a SPI only controller used for the host firmware, commonly called BIOS on Intel. It can be used in three mode : a SPI master, SPI slave and SPI pass-through Below is the initial framework for the SMC controller (FMC mode only) and the SPI controller: the sysbus object, MMIO for registers configuration and controls. Each controller has a SPI bus and a configurable number of CS lines for SPI flash slaves. The differences between the controllers are small, so they are abstracted using indirections on the register numbers. Only SPI flash modules are supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added one missing error_propagate] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04 13:06:37 +01:00
#include "hw/ssi/aspeed_smc.h"
aspeed: Integrate HACE Add the hash and crypto engine model to the Aspeed socs. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210409000253.1475587-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
#include "hw/misc/aspeed_hace.h"
ast2600: Add Secure Boot Controller model Just a stub that indicates the system has booted in secure boot mode. Used for testing the driver: https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/ Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Fixed typo - Adjusted Copyright dates ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-18 09:18:10 +01:00
#include "hw/misc/aspeed_sbc.h"
aspeed: add a watchdog controller This enables reboot of a guest from U-Boot and Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1485452251-1593-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
#include "hw/watchdog/wdt_aspeed.h"
aspeed: add a FTGMAC100 nic There is a second NIC but we do not use it for the moment. We use the 'aspeed' property to tune the definition of the end of ring buffer bit for the Aspeed SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-14 10:35:02 +02:00
#include "hw/net/ftgmac100.h"
include: Make headers more self-contained Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-12 07:23:31 +02:00
#include "target/arm/cpu.h"
aspeed: add a GPIO controller to the SoC Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04 09:04:58 +02:00
#include "hw/gpio/aspeed_gpio.h"
hw/sd/aspeed_sdhci: New device The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:27 +02:00
#include "hw/sd/aspeed_sdhci.h"
hw/arm: ast2400/ast2500: Wire up EHCI controllers Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06 10:34:37 -08:00
#include "hw/usb/hcd-ehci.h"
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 16:43:22 -04:00
#include "qom/object.h"
hw/misc: Add a basic Aspeed LPC controller model This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09 12:01:28 +01:00
#include "hw/misc/aspeed_lpc.h"
aspeed: Map unimplemented devices in SoC memory Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
#include "hw/misc/unimp.h"
hw/misc/aspeed: Add PECI controller This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
#include "hw/misc/aspeed_peci.h"
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
aspeed: extend the number of host SPI controllers The AST2500 SoC has two. Let's prepare ground for the next changes which will add the required definitions for the second host SPI controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:16 +01:00
#define ASPEED_SPIS_NUM 2
hw/arm: ast2400/ast2500: Wire up EHCI controllers Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06 10:34:37 -08:00
#define ASPEED_EHCIS_NUM 2
hw: wdt_aspeed: Add AST2600 support The AST2600 has four watchdogs, and they each have a 0x40 of registers. When running as part of an ast2600 system we must check a different offset for the system reset control register in the SCU. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-12-clg@kaod.org [clg: - reworked model integration into new object class ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:36 +02:00
#define ASPEED_WDTS_NUM 4
aspeed: introduce a configurable number of CPU per machine The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:16 +01:00
#define ASPEED_CPUS_NUM 2
aspeed: Parameterise number of MACs To support the ast2600's four MACs allow SoCs to specify the number they have, and create that many. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-22-clg@kaod.org [clg: - included a check on sc->macs_num when realizing the macs - included interrupt definitions for the AST2600 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:46 +02:00
#define ASPEED_MACS_NUM 4
aspeed: extend the number of host SPI controllers The AST2500 SoC has two. Let's prepare ground for the next changes which will add the required definitions for the second host SPI controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:16 +01:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 16:43:22 -04:00
struct AspeedSoCState {
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
/*< private >*/
DeviceState parent;
/*< public >*/
aspeed: introduce a configurable number of CPU per machine The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:16 +01:00
ARMCPU cpu[ASPEED_CPUS_NUM];
aspeed/soc: Add AST2600 support Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:43 +02:00
A15MPPrivState a7mpcore;
aspeed/soc : Add AST1030 support The embedded core of AST1030 SoC is ARM Coretex M4. It is hard to be integrated in the common Aspeed Soc framework. We introduce a new ast1030 class with instance_init and realize handlers. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ] Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02 17:03:03 +02:00
ARMv7MState armv7m;
aspeed: Add memory property to Aspeed SoC Multi-SoC machines can use this property to specify a memory container for each SoC. Single SoC machines will just specify get_system_memory(). Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
MemoryRegion *memory;
aspeed: Add a DRAM memory region at the SoC level Currently, we link the DRAM memory region to the FMC model (for DMAs) through a property alias at the SoC level. The I2C model will need a similar region for DMA support, add a DRAM region property at the SoC level for both model to use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:57 +01:00
MemoryRegion *dram_mr;
aspeed: Set the dram container at the SoC level Currently, the Aspeed machines allocate a ram container region in which the machine ram region is mapped. See commit ad1a9782186d ("aspeed: add a RAM memory region container"). An extra region is mapped after ram in the ram container to catch invalid access done by FW. That's how FW determines the size of ram. See commit ebe31c0a8ef7 ("aspeed: add a max_ram_size property to the memory controller"). Let's move all the logic under the SoC where it should be. It will also ease the work on multi SoC support. Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220623202123.3972977-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
MemoryRegion dram_container;
aspeed: add a memory region for SRAM The size of the SRAM depends on the SoC model, so use a per-soc definition when creating the region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-9-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:27 +00:00
MemoryRegion sram;
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
AspeedVICState vic;
hw/arm/aspeed: Add RTC to SoC All systems have an RTC. The IRQ is hooked up but the model does not use it at this stage. There is no guest code that uses it, so this limitation is acceptable. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:16 +01:00
AspeedRtcState rtc;
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
AspeedTimerCtrlState timerctrl;
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:29 +01:00
AspeedI2CState i2c;
hw/arm/aspeed: Add the i3c device to the AST2600 SoC Add the new i3c device to the AST2600 SoC. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-3-troy_lee@aspeedtech.com [PMM: tidied commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 16:45:46 +08:00
AspeedI3CState i3c;
ast2400: Integrate the SCU model and set silicon revision By specifying the silicon revision we select the appropriate reset values for the SoC. Additionally, expose hardware strapping properties aliasing those provided by the SCU for board-specific configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1466744305-23163-3-git-send-email-andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-27 15:37:33 +01:00
AspeedSCUState scu;
aspeed: Integrate HACE Add the hash and crypto engine model to the Aspeed socs. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210409000253.1475587-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
AspeedHACEState hace;
hw/misc/aspeed_xdma: New device The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:18 +01:00
AspeedXDMAState xdma;
hw/arm: Integrate ADC model into Aspeed SoC Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211005052604.1674891-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12 08:20:08 +02:00
AspeedADCState adc;
aspeed: rename the smc object to fmc The Aspeed SoC has three different types of SMC (Static Memory Controller) controllers: the SMC (legacy), the FMC (the new one) and the SPI for the host PNOR. The FMC and the SPI models are now converging on the AST2500 SoC and the SMC, which was still available on the AST2400 SoC, was removed. The Aspeed SoC does not provide support for the legacy SMC controller. So, let's rename the 'smc' object to 'fmc' to clarify its nature. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:16 +01:00
AspeedSMCState fmc;
aspeed: extend the number of host SPI controllers The AST2500 SoC has two. Let's prepare ground for the next changes which will add the required definitions for the second host SPI controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:16 +01:00
AspeedSMCState spi[ASPEED_SPIS_NUM];
hw/arm: ast2400/ast2500: Wire up EHCI controllers Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06 10:34:37 -08:00
EHCISysBusState ehci[ASPEED_EHCIS_NUM];
ast2600: Add Secure Boot Controller model Just a stub that indicates the system has booted in secure boot mode. Used for testing the driver: https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/ Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Fixed typo - Adjusted Copyright dates ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-18 09:18:10 +01:00
AspeedSBCState sbc;
aspeed: Map unimplemented devices in SoC memory Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
UnimplementedDeviceState sbc_unimplemented;
ast2400: add a memory controller device model The uboot in the previous release of the SDK was using a hardcoded value for memory size. This is not true anymore, the value is now retrieved from the memory controller. Below is a model for this device, only supporting unlock and configuration. Without it, we endup running a guest with 64MB, which is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to build a default value. Some bits should be linked to SCU strapping registers but it seems a bit complex to add for the current need. The model is ready for the AST2500 SOC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-06 19:52:17 +01:00
AspeedSDMCState sdmc;
aspeed: Register all watchdogs The ast2400 contains two and the ast2500 contains three watchdogs. Add this information to the AspeedSoCInfo and realise the correct number of watchdogs for that each SoC type. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11 11:21:26 +01:00
AspeedWDTState wdt[ASPEED_WDTS_NUM];
aspeed: add support for multiple NICs The Aspeed SoCs have two MACs. Extend the Aspeed model to support a second NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:16 +01:00
FTGMAC100State ftgmac100[ASPEED_MACS_NUM];
aspeed: add support for the Aspeed MII controller of the AST2600 The AST2600 SoC has an extra controller to set the PHY registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-23-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:47 +02:00
AspeedMiiState mii[ASPEED_MACS_NUM];
aspeed: add a GPIO controller to the SoC Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04 09:04:58 +02:00
AspeedGPIOState gpio;
aspeed/soc: Add AST2600 support Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:43 +02:00
AspeedGPIOState gpio_1_8v;
hw/sd/aspeed_sdhci: New device The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:27 +02:00
AspeedSDHCIState sdhci;
hw/arm: ast2600: Wire up the eMMC controller Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30 16:02:02 +00:00
AspeedSDHCIState emmc;
hw/misc: Add a basic Aspeed LPC controller model This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09 12:01:28 +01:00
AspeedLPCState lpc;
hw/misc/aspeed: Add PECI controller This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
AspeedPECIState peci;
hw/arm/aspeed: Allow machine to set UART default When you run QEMU with an Aspeed machine and a single serial device using stdio like this: qemu -machine ast2600-evb -drive ... -serial stdio The guest OS can read and write to the UART5 registers at 0x1E784000 and it will receive from stdin and write to stdout. The Aspeed SoC's have a lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on the board design, may be using any of them as the serial console. (See "stdout-path" in a DTS to check which one is chosen). Most boards, including all of those currently defined in hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds some flexibility for different boards without requiring users to change their command-line invocation of QEMU. I tested this doesn't break existing code by booting an AST2500 OpenBMC image and an AST2600 OpenBMC image, each using UART5 as the console. Then I tested switching the default to UART1 and booting an AST2600 OpenBMC image that uses UART1, and that worked too. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901153615.2746885-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20 08:50:59 +02:00
uint32_t uart_default;
aspeed/soc : Add AST1030 support The embedded core of AST1030 SoC is ARM Coretex M4. It is hard to be integrated in the common Aspeed Soc framework. We introduce a new ast1030 class with instance_init and realize handlers. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: rename aspeed_ast10xx.c to aspeed_ast10x0.c to match zephyr ] Message-Id: <20220401083850.15266-8-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02 17:03:03 +02:00
Clock *sysclk;
aspeed: Map unimplemented devices in SoC memory Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
UnimplementedDeviceState iomem;
UnimplementedDeviceState video;
UnimplementedDeviceState emmc_boot_controller;
UnimplementedDeviceState dpmcu;
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 16:43:22 -04:00
};
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
ast2400: replace ast2400 with aspeed_soc This is a name replacement to prepare ground for other SoCs. Let's also remove the AST2400_SMC_BASE definition from the address space mappings, as it is not used. This controller was removed from the Aspeed SoC AST2500, so this provides us a better common base for the address space mapping on both SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
#define TYPE_ASPEED_SOC "aspeed-soc"
Use OBJECT_DECLARE_TYPE when possible This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16 14:25:18 -04:00
OBJECT_DECLARE_TYPE(AspeedSoCState, AspeedSoCClass, ASPEED_SOC)
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 16:43:22 -04:00
struct AspeedSoCClass {
aspeed: Introduce an object class per SoC It prepares ground for the AST2600. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:42 +02:00
DeviceClass parent_class;
aspeed-soc: provide a framework to add new SoCs Let's define an object class for each Aspeed SoC we support. A AspeedSoCInfo struct gathers the SoC specifications which can later be used by an instance of the class or by a board using the SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
const char *name;
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-13 18:04:57 +02:00
const char *cpu_type;
aspeed-soc: provide a framework to add new SoCs Let's define an object class for each Aspeed SoC we support. A AspeedSoCInfo struct gathers the SoC specifications which can later be used by an instance of the class or by a board using the SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
uint32_t silicon_rev;
aspeed: add a memory region for SRAM The size of the SRAM depends on the SoC model, so use a per-soc definition when creating the region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-9-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:27 +00:00
uint64_t sram_size;
aspeed: extend the number of host SPI controllers The AST2500 SoC has two. Let's prepare ground for the next changes which will add the required definitions for the second host SPI controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:16 +01:00
int spis_num;
hw/arm: ast2400/ast2500: Wire up EHCI controllers Initialize EHCI controllers on AST2400 and AST2500 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux successfully instantiates a USB interface. ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206183437.3979-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06 10:34:37 -08:00
int ehcis_num;
aspeed: Register all watchdogs The ast2400 contains two and the ast2500 contains three watchdogs. Add this information to the AspeedSoCInfo and realise the correct number of watchdogs for that each SoC type. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11 11:21:26 +01:00
int wdts_num;
aspeed: Parameterise number of MACs To support the ast2600's four MACs allow SoCs to specify the number they have, and create that many. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-22-clg@kaod.org [clg: - included a check on sc->macs_num when realizing the macs - included interrupt definitions for the AST2600 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:46 +02:00
int macs_num;
hw: aspeed: Add uarts_num SoC attribute AST2400 and AST2500 have 5 UART's, while the AST2600 and AST1030 have 13. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
int uarts_num;
aspeed: add a per SoC mapping for the interrupt space This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:15 +01:00
const int *irqmap;
aspeed: add a per SoC mapping for the memory space This will simplify the definition of new SoCs, like the AST2600 which should use a slightly different address space and have a different set of controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:15 +01:00
const hwaddr *memmap;
aspeed: introduce a configurable number of CPU per machine The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:16 +01:00
uint32_t num_cpus;
aspeed: Introduce a get_irq AspeedSoCClass method and make routine aspeed_soc_get_irq() common to all SoCs. This will be useful to share code. Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Peter Delevoryas <pdel@fb.com> Reviewed-by: Peter Delevoryas <pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516055620.2380197-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
qemu_irq (*get_irq)(AspeedSoCState *s, int dev);
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 16:43:22 -04:00
};
aspeed-soc: provide a framework to add new SoCs Let's define an object class for each Aspeed SoC we support. A AspeedSoCInfo struct gathers the SoC specifications which can later be used by an instance of the class or by a board using the SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
hw/arm: Add ASPEED AST2400 SoC model While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:06:00 +00:00
aspeed: add a per SoC mapping for the interrupt space This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:15 +01:00
enum {
aspeed_soc: Rename memmap/irqmap enum constants Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-25 15:20:02 -04:00
ASPEED_DEV_IOMEM,
ASPEED_DEV_UART1,
ASPEED_DEV_UART2,
ASPEED_DEV_UART3,
ASPEED_DEV_UART4,
ASPEED_DEV_UART5,
hw: aspeed: Add missing UART's This adds the missing UART memory and IRQ mappings for the AST2400, AST2500, AST2600, and AST1030. This also includes the new UART interfaces added in the AST2600 and AST1030 from UART6 to UART13. The addresses and interrupt numbers for these two later chips are identical. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
ASPEED_DEV_UART6,
ASPEED_DEV_UART7,
ASPEED_DEV_UART8,
ASPEED_DEV_UART9,
ASPEED_DEV_UART10,
ASPEED_DEV_UART11,
ASPEED_DEV_UART12,
ASPEED_DEV_UART13,
aspeed_soc: Rename memmap/irqmap enum constants Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-25 15:20:02 -04:00
ASPEED_DEV_VUART,
ASPEED_DEV_FMC,
ASPEED_DEV_SPI1,
ASPEED_DEV_SPI2,
ASPEED_DEV_EHCI1,
ASPEED_DEV_EHCI2,
ASPEED_DEV_VIC,
ASPEED_DEV_SDMC,
ASPEED_DEV_SCU,
ASPEED_DEV_ADC,
ast2600: Add Secure Boot Controller model Just a stub that indicates the system has booted in secure boot mode. Used for testing the driver: https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/ Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Fixed typo - Adjusted Copyright dates ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-18 09:18:10 +01:00
ASPEED_DEV_SBC,
aspeed: Add eMMC Boot Controller stub Guest code (u-boot) pokes at this on boot. No functionality is required for guest code to work correctly, but it helps to document the region being read from. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220318092211.723938-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02 17:03:02 +02:00
ASPEED_DEV_EMMC_BC,
aspeed_soc: Rename memmap/irqmap enum constants Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-25 15:20:02 -04:00
ASPEED_DEV_VIDEO,
ASPEED_DEV_SRAM,
ASPEED_DEV_SDHCI,
ASPEED_DEV_GPIO,
ASPEED_DEV_GPIO_1_8V,
ASPEED_DEV_RTC,
ASPEED_DEV_TIMER1,
ASPEED_DEV_TIMER2,
ASPEED_DEV_TIMER3,
ASPEED_DEV_TIMER4,
ASPEED_DEV_TIMER5,
ASPEED_DEV_TIMER6,
ASPEED_DEV_TIMER7,
ASPEED_DEV_TIMER8,
ASPEED_DEV_WDT,
ASPEED_DEV_PWM,
ASPEED_DEV_LPC,
ASPEED_DEV_IBT,
ASPEED_DEV_I2C,
hw/misc/aspeed: Add PECI controller This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
ASPEED_DEV_PECI,
aspeed_soc: Rename memmap/irqmap enum constants Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-25 15:20:02 -04:00
ASPEED_DEV_ETH1,
ASPEED_DEV_ETH2,
ASPEED_DEV_ETH3,
ASPEED_DEV_ETH4,
ASPEED_DEV_MII1,
ASPEED_DEV_MII2,
ASPEED_DEV_MII3,
ASPEED_DEV_MII4,
ASPEED_DEV_SDRAM,
ASPEED_DEV_XDMA,
ASPEED_DEV_EMMC,
hw/misc: Model KCS devices in the Aspeed LPC controller Keyboard-Controller-Style devices for IPMI purposes are exposed via LPC IO cycles from the BMC to the host. Expose support on the BMC side by implementing the usual MMIO behaviours, and expose the ability to inspect the KCS registers in "host" style by accessing QOM properties associated with each register. The model caters to the IRQ style of both the AST2600 and the earlier SoCs (AST2400 and AST2500). The AST2600 allocates an IRQ for each LPC sub-device, while there is a single IRQ shared across all subdevices on the AST2400 and AST2500. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210302014317.915120-6-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09 12:01:28 +01:00
ASPEED_DEV_KCS,
aspeed: Integrate HACE Add the hash and crypto engine model to the Aspeed socs. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210409000253.1475587-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
ASPEED_DEV_HACE,
Add dummy Aspeed AST2600 Display Port MCU (DPMCU) AST2600 Display Port MCU introduces 0x18000000~0x1803FFFF as it's memory and io address. If guest machine try to access DPMCU memory, it will cause a fatal error. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211210083034.726610-1-troy_lee@aspeedtech.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-07 17:07:57 +00:00
ASPEED_DEV_DPMCU,
ASPEED_DEV_DP,
hw/arm/aspeed: Add the i3c device to the AST2600 SoC Add the new i3c device to the AST2600 SoC. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-3-troy_lee@aspeedtech.com [PMM: tidied commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-11 16:45:46 +08:00
ASPEED_DEV_I3C,
aspeed: add a per SoC mapping for the interrupt space This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:26:15 +01:00
};
aspeed: Introduce a get_irq AspeedSoCClass method and make routine aspeed_soc_get_irq() common to all SoCs. This will be useful to share code. Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Peter Delevoryas <pdel@fb.com> Reviewed-by: Peter Delevoryas <pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516055620.2380197-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev);
hw: aspeed: Introduce common UART init function Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516062328.298336-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
void aspeed_soc_uart_init(AspeedSoCState *s);
aspeed: Set the dram container at the SoC level Currently, the Aspeed machines allocate a ram container region in which the machine ram region is mapped. See commit ad1a9782186d ("aspeed: add a RAM memory region container"). An extra region is mapped after ram in the ram container to catch invalid access done by FW. That's how FW determines the size of ram. See commit ebe31c0a8ef7 ("aspeed: add a max_ram_size property to the memory controller"). Let's move all the logic under the SoC where it should be. It will also ease the work on multi SoC support. Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220623202123.3972977-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
bool aspeed_soc_dram_init(AspeedSoCState *s, Error **errp);
aspeed: Remove usage of sysbus_mmio_map sysbus_mmio_map maps devices into "get_system_memory()". With the new SoC memory attribute, we want to make sure that each device is mapped into the SoC memory. In single SoC machines, the SoC memory is the same as "get_system_memory()", but in multi SoC machines it will be different. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-4-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
void aspeed_mmio_map(AspeedSoCState *s, SysBusDevice *dev, int n, hwaddr addr);
aspeed: Map unimplemented devices in SoC memory Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220624003701.1363500-5-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
void aspeed_mmio_map_unimplemented(AspeedSoCState *s, SysBusDevice *dev,
const char *name, hwaddr addr,
uint64_t size);
aspeed: Introduce a get_irq AspeedSoCClass method and make routine aspeed_soc_get_irq() common to all SoCs. This will be useful to share code. Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Peter Delevoryas <pdel@fb.com> Reviewed-by: Peter Delevoryas <pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220516055620.2380197-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25 10:31:33 +02:00
ast2400: replace ast2400 with aspeed_soc This is a name replacement to prepare ground for other SoCs. Let's also remove the AST2400_SMC_BASE definition from the address space mappings, as it is not used. This controller was removed from the Aspeed SoC AST2500, so this provides us a better common base for the address space mapping on both SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:05 +01:00
#endif /* ASPEED_SOC_H */
Reference in New Issue Copy Permalink