dfaggioli/qemu
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
8049df7cee899fbed2e52f92f8278f74c5b87bcd
qemu/hw/usb/quirks-pl2303-ids.h

151 lines
4.6 KiB
C
Raw Normal View History

usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/*
* Prolific PL2303 USB to serial adaptor driver header file
*
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
*
*/
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_ID_S81 0x4027
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define PL2303_VENDOR_ID 0x067b
#define PL2303_PRODUCT_ID 0x2303
#define PL2303_PRODUCT_ID_RSAQ2 0x04bb
#define PL2303_PRODUCT_ID_DCU11 0x1234
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
#define PL2303_PRODUCT_ID_GPRS 0x0609
#define PL2303_PRODUCT_ID_HCR331 0x331a
#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
#define ATEN_PRODUCT_ID 0x2008
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define IODATA_VENDOR_ID 0x04bb
#define IODATA_PRODUCT_ID 0x0a03
#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ELCOM_VENDOR_ID 0x056e
#define ELCOM_PRODUCT_ID 0x5003
#define ELCOM_PRODUCT_ID_UCSGT 0x5004
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ITEGNO_VENDOR_ID 0x0eba
#define ITEGNO_PRODUCT_ID 0x1080
#define ITEGNO_PRODUCT_ID_2080 0x2080
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define MA620_VENDOR_ID 0x0df7
#define MA620_PRODUCT_ID 0x0620
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID 0xb000
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define TRIPP_VENDOR_ID 0x2478
#define TRIPP_PRODUCT_ID 0x2008
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define RADIOSHACK_VENDOR_ID 0x1453
#define RADIOSHACK_PRODUCT_ID 0x4026
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define DCU10_VENDOR_ID 0x0731
#define DCU10_PRODUCT_ID 0x0528
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SITECOM_VENDOR_ID 0x6189
#define SITECOM_PRODUCT_ID 0x2068
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Alcatel OT535/735 USB cable */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ALCATEL_VENDOR_ID 0x11f7
#define ALCATEL_PRODUCT_ID 0x02df
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Samsung I330 phone cradle */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_ID 0x8001
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SIEMENS_VENDOR_ID 0x11f5
#define SIEMENS_PRODUCT_ID_SX1 0x0001
#define SIEMENS_PRODUCT_ID_X65 0x0003
#define SIEMENS_PRODUCT_ID_X75 0x0004
#define SIEMENS_PRODUCT_ID_EF81 0x0005
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Nokia CA-42 Cable */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define NOKIA_CA42_VENDOR_ID 0x078b
#define NOKIA_CA42_PRODUCT_ID 0x1234
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define CA_42_CA42_VENDOR_ID 0x10b5
#define CA_42_CA42_PRODUCT_ID 0xac70
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SAGEM_VENDOR_ID 0x079b
#define SAGEM_PRODUCT_ID 0x0027
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Leadtek GPS 9531 (ID 0413:2101) */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define LEADTEK_VENDOR_ID 0x0413
#define LEADTEK_9531_PRODUCT_ID 0x2101
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* USB GSM cable from Speed Dragon Multimedia, Ltd */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SPEEDDRAGON_VENDOR_ID 0x0e55
#define SPEEDDRAGON_PRODUCT_ID 0x110b
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* DATAPILOT Universal-2 Phone Cable */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define DATAPILOT_U2_VENDOR_ID 0x0731
#define DATAPILOT_U2_PRODUCT_ID 0x2003
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Belkin "F5U257" Serial Adapter */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define BELKIN_VENDOR_ID 0x050d
#define BELKIN_PRODUCT_ID 0x0257
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Alcor Micro Corp. USB 2.0 TO RS-232 */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ALCOR_VENDOR_ID 0x058F
#define ALCOR_PRODUCT_ID 0x9720
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define WS002IN_VENDOR_ID 0x11f6
#define WS002IN_PRODUCT_ID 0x2001
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Corega CG-USBRS232R Serial Adapter */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define COREGA_VENDOR_ID 0x07aa
#define COREGA_PRODUCT_ID 0x002a
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define YCCABLE_VENDOR_ID 0x05ad
#define YCCABLE_PRODUCT_ID 0x0fba
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* "Superial" USB - Serial */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SUPERIAL_VENDOR_ID 0x5372
#define SUPERIAL_PRODUCT_ID 0x2303
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Hewlett-Packard LD220-HP POS Pole Display */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define HP_VENDOR_ID 0x03f0
#define HP_LD220_PRODUCT_ID 0x3524
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Cressi Edy (diving computer) PC interface */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define CRESSI_VENDOR_ID 0x04b8
#define CRESSI_EDY_PRODUCT_ID 0x0521
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Zeagle dive computer interface */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ZEAGLE_VENDOR_ID 0x04b8
#define ZEAGLE_N2ITION3_PRODUCT_ID 0x0522
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Sony, USB data cable for CMD-Jxx mobile phones */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SONY_VENDOR_ID 0x054c
#define SONY_QN3USB_PRODUCT_ID 0x0437
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SANWA_VENDOR_ID 0x11ad
#define SANWA_PRODUCT_ID 0x0001
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
usbredir: Add support for buffered bulk input (v2) Buffered bulk mode is intended for bulk *input* endpoints, where the data is of a streaming nature (not part of a command-response protocol). These endpoints' input buffer may overflow if data is not read quickly enough. So in buffered bulk mode the usb-host takes care of the submitting and re-submitting of bulk transfers. Buffered bulk mode is necessary for reliable operation with the bulk in endpoints of usb to serial convertors. Unfortunatelty buffered bulk input mode will only work with certain devices, therefor this patch also adds a usb-id table to enable it for devices which need it, while leaving the bulk ep handling for other devices unmodified. Note that the bumping of the required usbredir from 0.5.3 to 0.6 does not mean that we will now need a newer usbredir release then qemu-1.3, .pc files reporting 0.5.3 have only ever existed in usbredir builds directly from git, so qemu-1.3 needs the 0.6 release too. Changes in v2: -Split of quirk handling into quirks.c Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-12-19 15:08:33 +01:00
/* SMART USB Serial Adapter */
hw/usb: fix tab indentation The TABs should be replaced with spaces, to make sure that we have a consistent coding style with an indentation of 4 spaces everywhere. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370 Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com> Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-25 22:28:11 +08:00
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
Reference in New Issue Copy Permalink