dfaggioli/qemu
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
8df7129790896ffde2f9cb1005a0ac8cf1005280
qemu/hw/sensor/Kconfig

41 lines
555 B
Plaintext
Raw Normal View History

sensor: Move hardware sensors from misc to a sensor directory Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-05-18 16:08:03 -05:00
config TMP105
bool
depends on I2C
Kconfig: Add I2C_DEVICES device group Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2022-02-08 15:59:10 +00:00
default y if I2C_DEVICES
sensor: Move hardware sensors from misc to a sensor directory Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-05-18 16:08:03 -05:00
config TMP421
bool
depends on I2C
Kconfig: Add I2C_DEVICES device group Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2022-02-08 15:59:10 +00:00
default y if I2C_DEVICES
sensor: Move hardware sensors from misc to a sensor directory Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-05-18 16:08:03 -05:00
hw/misc: Add Infineon DPS310 sensor model This contains some hardcoded register values that were obtained from the hardware after reading the temperature. It does enough to test the Linux kernel driver. The FIFO mode, IRQs and operation modes other than the default as used by Linux are not modelled. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210616073358.750472-2-joel@jms.id.au> [ clg: - Fixed sequential reading - Reworked regs_reset_state array - Moved model under hw/sensor/ ] Message-Id: <20210629142336.750058-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20 08:50:59 +02:00
config DPS310
bool
depends on I2C
Kconfig: Add I2C_DEVICES device group Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2022-02-08 15:59:10 +00:00
default y if I2C_DEVICES
hw/misc: Add Infineon DPS310 sensor model This contains some hardcoded register values that were obtained from the hardware after reading the temperature. It does enough to test the Linux kernel driver. The FIFO mode, IRQs and operation modes other than the default as used by Linux are not modelled. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210616073358.750472-2-joel@jms.id.au> [ clg: - Fixed sequential reading - Reworked regs_reset_state array - Moved model under hw/sensor/ ] Message-Id: <20210629142336.750058-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20 08:50:59 +02:00
sensor: Move hardware sensors from misc to a sensor directory Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-05-18 16:08:03 -05:00
config EMC141X
bool
depends on I2C
Kconfig: Add I2C_DEVICES device group Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2022-02-08 15:59:10 +00:00
default y if I2C_DEVICES
hw/misc: add ADM1272 device The ADM1272 is a PMBus compliant Hot Swap Controller and Digital Power Monitor by Analog Devices. This commit adds support for interfacing with it, and support for setting and monitoring sensor limits. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-3-titusr@google.com> [Moved the device to the sensor directory] [remove include of trace.h, it is not needed] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08 10:25:53 -07:00
config ADM1272
bool
depends on I2C
hw/misc: add MAX34451 device The MAX34451 is a Maxim power-supply system manager that can monitor up to 16 voltage rails or currents. It also contains a temperature sensor and supports up to four external temperature sensors. This commit adds support for interfacing with it, and setting limits on the supported sensors. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-5-titusr@google.com> [Moved the device to the sensor directory] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08 10:25:55 -07:00
config MAX34451
bool
depends on I2C
hw/sensor: Add lsm303dlhc magnetometer device This commit adds emulation of the magnetometer on the LSM303DLHC. It allows the magnetometer's X, Y and Z outputs to be set via the mag-x, mag-y and mag-z properties, as well as the 12-bit temperature output via the temperature property. Sensor can be enabled with 'CONFIG_LSM303DLHC_MAG=y'. Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org> Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-30 10:50:32 +01:00
config LSM303DLHC_MAG
bool
depends on I2C
Kconfig: Add I2C_DEVICES device group Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2022-02-08 15:59:10 +00:00
default y if I2C_DEVICES
hw/sensor: add Intersil ISL69260 device model Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-8-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-07 12:06:03 -08:00
config ISL_PMBUS_VR
bool
depends on PMBUS
hw/sensor: add Maxim MAX31785 device MAX31785 is a PMBus compliant 6-Channel fan controller. It supports 6 fan channels, 11 temperature sensors, and 6-Channel ADC to measure the remote voltages. Datasheet can be found here: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf This initial version of the driver has skeleton and support for the fan channels. Requests for temperature sensors, and ADC Channels the are serviced with the default values as per the datasheet. No additional instrumentation is done. NV Log feature is not supported. Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627154703.148943-5-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00
config MAX31785
bool
depends on PMBUS
Reference in New Issue Copy Permalink