All commands switching from TRANSFER state to (sending)DATA
do the same: send stream of data on the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_sendingdata() on the I/O line setup the data to
be transferred,
- sd_generic_read_byte() on the DAT lines to fetch the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <4c9f7f51-83ee-421a-8690-9af2e80b134b@linaro.org>
Card entering sd_inactive_state powers off, and won't respond
anymore. Handle that once when entering sd_do_command().
Remove condition always true in sd_cmd_GO_IDLE_STATE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-12-philmd@linaro.org>
SDCardStates enum values are specified, so assign them
correspondingly. It will be useful later when we add
states from later specs, which might not be continuous.
See CURRENT_STATE bits in section 4.10.1 "Card Status".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-11-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-9-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol) and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-8-philmd@linaro.org>
The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.
Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>
It will be useful later to assert only ADTC commands
(Addressed point-to-point Data Transfer Commands, defined
as the 'sd_adtc' enum) extract the address value from the
command argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-18-philmd@linaro.org>
Extract sd_cmd_get_address() so we can re-use it
in various SDProto handlers. Use CARD_CAPACITY and
HWBLOCK_SHIFT definitions instead of magic values.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-17-philmd@linaro.org>
It will be useful later to assert only AC commands
(Addressed point-to-point Commands, defined as the
'sd_ac' enum) extract the RCA value from the command
argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-16-philmd@linaro.org>
There is no ACMD6 command in SPI mode, remove the pointless
handler introduced in commit 946897ce18 ("sdcard: handles
more commands in SPI mode"). Keep sd_cmd_unimplemented()
since we'll reuse it later.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-8-philmd@linaro.org>
aspeed queue:
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmTxsaQACgkQUaNDx8/7
# 7KGXmg//XJNisscl/VWSBaGmH5MbQUAg/QCRalXx1V/lJ8rhE/JqwnWKuoPFd4EN
# iDlh3ufpzxPhHFc9boechuM5ytlrJxpLJoCIJ4sw/4qnO3Dy3Q6BCy1t8Ma62D1u
# oE7cAMHsriJ1uTJNHUTFo72VapTaH2XwFN9lFDuQW45d+WWAXtVJsqvRgFETNmw6
# YYnTTpH2gLTZZFEgOixhWpGLh4Ibc/l8U1VzL0ctQmC11xng0bqk3PAqU9NGzcM5
# MJmEGAxg43CnFu9NJI1nMqC/coi/8PFtrM7HprSwE3H8Jkwncs4ePVT+kZQC+VNQ
# 7EaVkksfEGHlN8XP5+eQDrQ5yT6ve+fbHTLQhwULfeyt0GlQ8h1yewvHCDWo/zw3
# XI1ZyOcNZ2yiaenSUrTPzu0LiqZEJQnzRjPCpgTi1fU08ryEMEaPtr176YDLCguQ
# cpRj4QSZHCrGl/Eo9NlkFP/2rQDKTvCcedKPkYLQtsurSiH/36Oj9YvZycNtZ574
# ortKAtru4YV/rglNX4L8JDhdI+nqvy1liifpJsiS/2KBZDpVFaP8PzGIV40HNy3G
# 8/LVTnaggZaScF3ftHhkg84uQumELS9l2dhsNCL9HqdlrNXLQrVAIR6iuQlpOKBa
# 5S/6h7ZXGOb1qNVQjYp4HCrB7X1KIJYksZ3GdUREf8ot5Ds1FhE=
# =ymmX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 05:40:52 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu: (26 commits)
hw/sd: Introduce a "sd-card" SPI variant model
hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
hw/sd: Add sd_cmd_ALL_SEND_CID() handler
hw/sd: Add sd_cmd_SEND_OP_CMD() handler
hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
hw/sd: Add sd_cmd_unimplemented() handler
hw/sd: Add sd_cmd_illegal() handler
hw/sd: Introduce sd_cmd_handler type
hw/sd: Move proto_name to SDProto structure
hw/sd: When card is in wrong state, log which spec version is used
hw/sd: When card is in wrong state, log which state it is
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01
aspeed: Get the BlockBackend of FMC0 from the flash device
m25p80: Introduce an helper to retrieve the BlockBackend of a device
aspeed: Create flash devices only when defaults are enabled
hw/ssi: Check for duplicate CS indexes
aspeed/smc: Wire CS lines at reset
hw/ssi: Introduce a ssi_get_cs() helper
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
and replace the SDState::spi attribute with a test checking the
SDProto array of commands.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add 2 command handler arrays in SDProto, for CMD and ACMD.
Have sd_normal_command() / sd_app_command() use these arrays:
if an command handler is registered, call it, otherwise fall
back to current code base.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-5-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We report the card is in an inconsistent state, but don't precise
in which state it is. Add this information, as it is useful when
debugging problems.
Since we will reuse this code, extract as sd_invalid_state_for_cmd()
helper.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-2-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
CMD19 (SEND_TUNING_BLOCK) and CMD23 (SET_BLOCK_COUNT) were
added in the Physical Layer Simplified Specification v3.01.
When earlier spec version is requested, we should return ILLEGAL.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220509141320.98374-1-philippe.mathieu.daude@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
