zero-initialize ADMADescr 'dscr' in sdhci_do_adma() to avoid:
hw/sd/sdhci.c: In function ‘sdhci_do_adma’:
hw/sd/sdhci.c:714:29: error: ‘dscr.addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
trace_sdhci_adma("link", s->admasysaddr);
^
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since omap_mmc is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.
Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but would mean that
migration fails because it's only in sd_reset() that we
set up the wpgrps_size field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-5-git-send-email-peter.maydell@linaro.org
Since ssi-sd is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.
Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.
In the case of sd-ssi, we have to implement an entire
reset function since there wasn't one previously, and
that requires a QOM cast macro that got omitted when this
device was QOMified.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-4-git-send-email-peter.maydell@linaro.org
Since milkymist-memcard is still using the legacy SD card API,
the SD card created by sd_init() is not plugged into any bus.
This means that the controller has to reset it manually.
Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-3-git-send-email-peter.maydell@linaro.org
Since pl181 is still using the legacy SD card API, the SD
card created by sd_init() is not plugged into any bus. This
means that the controller has to reset it manually.
Failing to do this mostly didn't affect the guest since the
guest typically does a programmed SD card reset as part of
its SD controller driver initialization, but meant that
migration failed because it's only in sd_reset() that we
set up the wpgrps_size field.
Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1739378
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1515506513-31961-2-git-send-email-peter.maydell@linaro.org
sdl2: bugfixes.
spice: cleanups.
input: mem leak fix.
gtk: deprecate 2.x support.
# gpg: Signature made Fri 12 Jan 2018 14:52:39 GMT
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ui-20180112-pull-request:
sdl2: Ignore UI hotkeys after a focus change when GUI modifier is held
sdl2 uses surface relative coordinates
sdl2: Do not hide the cursor on auxilliary windows
spice: remove unused timer list
spice: remove only written event_mask field
spice: remove unused watch list
spice: remove QXLWorker interface field
ui: deprecate use of GTK 2.x in favour of 3.x series
input: fix memory leak
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a replacement of g_timeout_add[_seconds]() for chardevs. Chardevs
now can have dedicated gcontext, we should always bind chardev tasks
onto those gcontext rather than the default main context. Since there
are quite a few of g_timeout_add[_seconds]() callers, a new function
qemu_chr_timeout_add_ms() is introduced.
One thing to mention is that, terminal3270 is still always running on
main gcontext. However let's convert that as well since it's still part
of chardev codes and in case one day we'll miss that when we move it out
of main gcontext too.
Also, convert all the timers from GSource tags into GSource pointers.
Gsource tag IDs and g_source_remove()s can only work with default
gcontext, while now these GSources can logically be attached to other
contexts. So let's use explicit g_source_destroy() plus another
g_source_unref() to remove a timer.
Note: when in the timer handler, we don't need the g_source_destroy()
any more since that'll be done automatically if the timer handler
returns false (and that's what all the current handlers do).
Yet another note: in pty_chr_rearm_timer() we take special care for
ms=1000. This patch merged the two cases into one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HPET saves its state by calculating the current time and recovers timer
offset using this calculated value. But these calculations include
divisions and multiplications. Therefore the timer state cannot be recovered
precise enough.
This patch introduces saving of the original value of the offset to
preserve the determinism of the timer.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
--
v3: Added compat property for correct migration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When -no-acpi option is used with Q35 machine type, no guest ACPI is
built, but the ACPI device is still created, so only checking the
presence of ACPI device before memory plug/unplug is not enough in
such cases. Check whether ACPI is disabled globally in addition and
fail memory plug/unplug if it's disabled.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171222015120.31730-1-haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the property to the device model, then parse it by calling
blkconf_apply_backend_options().
In addition to blk_set_perm(), the called function also handles error
options and wce. For error options we've already checked that the
default values are used, for wce we don't have the option either so it
is always the default (true). In other words there is no change of
behavior in these regards.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20171205151553.7834-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cores with and without MMU have system RAM and ROM at different locations.
Also with noMMU cores system IO region is accessible through two physical
address ranges.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Extract flash configuration into a separate structure to make it easier
to share between MMU and noMMU configurations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
XTFPGA boards should populate core memory regions the same way sim
machine does. Move xtensa_create_memory_regions implementation to a
separate file and use it to create instruction and data memory regions
on XTFPGA boards.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Function/structure naming inconsistently uses lx, lx60 and xtensa
prefixes where xtfpga would be appropriate. Fix that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't load jump target into the CPU config, instead put it and initial
a2 as literals into the mini bootloader and use l32r to load them
natively. With these changes it should be possible to do warm reboot of
the guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:
1. A QEMU instance is started against a TAP device on Linux
host, running Linux guest, e. g., something to the effect
of:
qemu-system-arm \
-net nic,model=imx.fec,netdev=lan0 \
netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
... rest of the arguments ...
2. Once QEMU starts, but before guest reaches the point where
FEC deriver is done initializing the HW, Guest, via TAP
interface, receives a number of multicast MDNS packets from
Host (not necessarily true for every OS, but it happens at
least on Fedora 25)
3. Recieving a packet in such a state results in
imx_eth_can_receive() returning '0', which in turn causes
tap_send() to disable corresponding event (tap.c:203)
4. Once Guest's driver reaches the point where it is ready to
recieve packets it prepares Rx ring descriptors and writes
ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
more descriptors are ready. And at this points emulation
layer does this:
s->regs[index] = ENET_RDAR_RDAR;
imx_eth_enable_rx(s);
which, combined with:
if (!s->regs[ENET_RDAR]) {
qemu_flush_queued_packets(qemu_get_queue(s->nic));
}
results in Rx queue never being flushed and corresponding
I/O event beign disabled.
To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`
This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.
Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc patch queue 2018-01-11
This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).
Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions
# gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180111:
spapr: Correct compatibility mode setting for hotplugged CPUs
hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device
Update dtc to fix compilation problem on Mac OS 10.6
target/ppc: more use of the PPC_*() macros
ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency
hw/ide: Emulate SiI3112 SATA controller
spapr_pci: use warn_report()
ppc4xx_i2c: Implement basic I2C functions
sm501: Add some more unimplemented registers
sm501: Add panel hardware cursor registers also to read function
pseries: Update SLOF firmware image to qemu-slof-20171214
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the pseries machine sets the compatibility mode for the
guest's cpus in two places: 1) at machine reset and 2) after CAS
negotiation.
This means that if we set or negotiate a compatiblity mode, then
hotplug a cpu, the hotplugged cpu doesn't get the right mode set and
will incorrectly have the full native features.
To correct this, we set the compatibility mode on a cpu when it is
brought online with the 'start-cpu' RTAS call. Given that we no
longer need to set the compatibility mode on all CPUs at machine
reset, so we change that to only set the mode for the boot cpu.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
It's a deprecated dummy device since QEMU v2.6.0. That should have
been enough time to allow the users to update their scripts in case
they still use it, so let's remove this legacy code now.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also introduce utilities to manipulate bitmasks (originaly from OPAL)
which be will be used in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'pnv' prefix is now used for all and the routines populating the
device tree start with 'pnv_dt'. The handler of the PnvXScomInterface
is also renamed to 'dt_xscom' which should reflect that it is
populating the device tree under the 'xscom@' node of the chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a common generic PCI SATA controller that is also used in PCs
but more importantly guests running on the Sam460ex board prefer this
card and have a driver for it (unlike for other SATA controllers
already emulated).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
