Section 3.4.7 of the datasheet explains that,
The RBE bit in the Interrupt Status register is set when the
SONIC finishes using the second to last receive buffer and reads
the last RRA descriptor. Actually, the SONIC is not truly out of
resources, but gives the system an early warning of an impending
out of resources condition.
RBE does not mean actual receive buffer exhaustion, and reception should
not be stopped. This is important because Linux will not check and clear
the RBE interrupt until it receives another packet. But that won't
happen if can_receive returns false. This bug causes the SONIC to become
deaf (until reset).
Fix this with a new flag to indicate actual receive buffer exhaustion.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit c2279bd0a1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The jazzsonic driver in Linux uses the Silicon Revision register value
to probe the chip. The driver fails unless the SR register contains 4.
Unfortunately, reading this register in QEMU usually returns 0 because
the s->regs[] array gets wiped after a software reset.
Fixes: bd8f1ebce4 ("net/dp8393x: fix hardware reset")
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 083e21bbdd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These operations need to take place regardless of whether or not
rx descriptors have been used up (that is, EOL flag was observed).
The algorithm is now the same for a packet that was withheld as for
a packet that was not.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 80b60673ea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When the SONIC receives a packet into the last available descriptor, it
retains ownership of that descriptor for as long as necessary.
Section 3.4.7 of the datasheet says,
When the system appends more descriptors, the SONIC releases ownership
of the descriptor after writing 0000h to the RXpkt.in_use field.
The packet can now be processed by the host, so raise a PKTRX interrupt,
just like the normal case.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit d9fae13196)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The existing code has a bug where the Remaining Buffer Word Count (RBWC)
is calculated with a truncating division, which gives the wrong result
for odd-sized packets.
Section 1.4.1 of the datasheet says,
Once the end of the packet has been reached, the serializer will
fill out the last word (16-bit mode) or long word (32-bit mode)
if the last byte did not end on a word or long word boundary
respectively. The fill byte will be 0FFh.
Implement buffer padding so that buffer limits are correctly enforced.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 350e7d9a77)
*drop context dependencies from b7cbebf2b9, 1ccda935d4, and
19f7034773
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Section 3.4.1 of the datasheet says,
The alignment of the RRA is confined to either word or long word
boundaries, depending upon the data width mode. In 16-bit mode,
the RRA must be aligned to a word boundary (A0 is always zero)
and in 32-bit mode, the RRA is aligned to a long word boundary
(A0 and A1 are always zero).
This constraint has been implemented for 16-bit mode; implement it
for 32-bit mode too.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit ea2270279b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A received packet consumes pkt_size bytes in the buffer and the frame
checksum that's appended to it consumes another 4 bytes. The Receive
Buffer Address register takes the former quantity into account but
not the latter. So the next packet written to the buffer overwrites
the frame checksum. Fix this.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit bae112b80c)
*drop context dep. on 19f7034773
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a bounds check to prevent a large packet from causing a buffer
overflow. This is defensive programming -- I haven't actually tried
sending an oversized packet or a jumbo ethernet frame.
The SONIC handles packets that are too big for the buffer by raising
the RBAE interrupt and dropping them. Linux uses that interrupt to
count dropped packets.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit ada7431527)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Follow the algorithm given in the National Semiconductor DP83932C
datasheet in section 3.4.7:
At the next reception, the SONIC re-reads the last RXpkt.link field,
and updates its CRDA register to point to the next descriptor.
The chip is designed to allow the host to provide a new list of
descriptors in this way.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 5b0c98fcb7)
*drop context dep on 19f7034773
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This function re-uses its 'size' argument as a scratch variable.
Instead, declare a local 'size' variable for that purpose so that the
function result doesn't get messed up.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 9e3cd456d8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to the datasheet, section 3.4.4, "in 32-bit mode ... the SONIC
always writes long words".
Therefore, use the same technique for the 'in_use' field that is used
everywhere else, and write the full long word.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 46ffee9ad4)
Conflicts:
hw/net/dp8393x.c
*roll in local dependencies on b7cbebf2b9
*drop functional dep. on 19f7034773
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The DP83932 and DP83934 have 32 data lines. The datasheet says,
Data Bus: These bidirectional lines are used to transfer data on the
system bus. When the SONIC is a bus master, 16-bit data is transferred
on D15-D0 and 32-bit data is transferred on D31-D0. When the SONIC is
accessed as a slave, register data is driven onto lines D15-D0.
D31-D16 are held TRI-STATE if SONIC is in 16-bit mode. If SONIC is in
32-bit mode, they are driven, but invalid.
Always use 32-bit accesses both as bus master and bus slave.
Force the MSW to zero in bus master mode.
This gets the Linux 'jazzsonic' driver working, and avoids the need for
prior hacks to make the NetBSD 'sn' driver work.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 3fe9a838ec)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The Least Significant bit of a descriptor address register is used as
an EOL flag. It has to be masked when the register value is to be used
as an actual address for copying memory around. But when the registers
are to be updated the EOL bit should not be masked.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 88f632fbb1)
Conflicts:
hw/net/dp8393x.c
*drop context dep. on 19f7034773
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The commit a718978ed5 from July 2015 introduced the assertion which
implies that the size of successful DMA transfers handled in ide_dma_cb()
should be multiple of 512 (the size of a sector). But guest systems can
initiate DMA transfers that don't fit this requirement.
For fixing that let's check the number of bytes prepared for the transfer
by the prepare_buf() handler. The code in ide_dma_cb() must behave
according to the Programming Interface for Bus Master IDE Controller
(Revision 1.0 5/16/94):
1. If PRDs specified a smaller size than the IDE transfer
size, then the Interrupt and Active bits in the Controller
status register are not set (Error Condition).
2. If the size of the physical memory regions was equal to
the IDE device transfer size, the Interrupt bit in the
Controller status register is set to 1, Active bit is set to 0.
3. If PRDs specified a larger size than the IDE transfer size,
the Interrupt and Active bits in the Controller status register
are both set to 1.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20191223175117.508990-2-alex.popov@linux.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit ed78352a59)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When the 'vga=' parameter is succeeded by another parameter, QEMU 4.2.0
would refuse to start with a rather cryptic message:
$ qemu-system-x86_64 -kernel /boot/vmlinuz-linux -append 'vga=792 quiet'
qemu: can't parse 'vga' parameter: Invalid argument
It was not clear whether this applied to the '-vga std' parameter or the
'-append' one. Fix the parsing regression and clarify the error.
Fixes: 133ef074bd ("hw/i386/pc: replace use of strtol with qemu_strtoui in x86_load_linux()")
Cc: Sergio Lopez <slp@redhat.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-Id: <20191221162124.1159291-1-peter@lekensteyn.nl>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a88c40f02a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit aa57020774, by mistake used MachineClass::numa_mem_supported
to check if NUMA is supported by machine and also as unrelated change
set it to true for sbsa-ref board.
Luckily change didn't break machines that support NUMA, as the field
is set to true for them.
But the field is not intended for checking if NUMA is supported and
will be flipped to false within this release for new machine types.
Fix it:
- by using previously used condition
!mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id
the first time and then use MachineState::numa_state down the road
to check if NUMA is supported
- dropping stray sbsa-ref chunk
Fixes: aa57020774
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit fcd3f2cc12)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Functions that take an Error ** parameter to pass an error to the
caller expect the parameter to point to null.
failover_replug_primary() violates this precondition in several
places:
* After qemu_opts_from_qdict() failed, *errp is no longer null.
Passing it to error_setg() is wrong, and will trip the assertion in
error_setv(). Messed up in commit 150ab54aa6 "net/virtio: fix
re-plugging of primary device". Simply drop the error_setg().
* Passing @errp to qemu_opt_set_bool(), hotplug_handler_pre_plug(),
and hotplug_handler_plug() is wrong. If one of the first two fails,
*errp is no longer null. Risks tripping the same assertion.
Moreover, continuing after such errors is unsafe. Messed up in
commit 9711cd0dfc "net/virtio: add failover support". Fix by
handling each error properly.
failover_replug_primary() crashes when passed a null @errp. Also
messed up in commit 9711cd0dfc. This bug can't bite as no caller
actually passes null. Fix it anyway.
Fixes: 9711cd0dfc
Fixes: 150ab54aa6
Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191130194240.10517-3-armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
virtio_net_handle_migration_primary() returns early when it can't
ensure n->primary_dev is non-null. Checking it again right after that
early return is redundant. Drop.
If n->primary_dev is null on entering failover_replug_primary(), @pdev
will become null, and pdev->partially_hotplugged will crash. Checking
n->primary_dev later is useless. It can't actually be null, because
its caller virtio_net_handle_migration_primary() ensures it isn't.
Drop the useless check.
Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191130194240.10517-2-armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
ppc patch queue for 2019-11-26
Here's the first 4.2 hard freeze pull request from me. This has:
* A fix for some testcases that cause errors on older host kernels
(e.g. RHEL7), with our new default configuration of VSMT mode
* Changes to make VFIO devices interact properly with change of irq
chip caused by PAPR feature negotiation. This is more involved
than I would like, but it's a problem in real use cases and I
can't see an easier way to handle it.
* Fix an error with ms6522 counters for the g3beige machine
* Fix a coverity warning
# gpg: Signature made Tue 26 Nov 2019 05:52:16 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191126:
ppc/spapr_events: fix potential NULL pointer dereference in rtas_event_log_dequeue
mos6522: update counters when timer interrupts are off
spapr: Work around spurious warnings from vfio INTx initialization
spapr: Handle irq backend changes with VFIO PCI devices
vfio/pci: Respond to KVM irqchip change notifier
vfio/pci: Split vfio_intx_update()
kvm: Introduce KVM irqchip change notifier
pseries: fix migration-test and pxe-test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RISC-V Patches for 4.2-rc3
This tag contains two patches that I'd like to target for 4.2-rc3:
* A fix to the DT entry for the SiFive test finisher.
* A fix to the spike board's HTIF interface.
This passes "make check" and boots OE for me.
# gpg: Signature made Mon 25 Nov 2019 20:51:13 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-rc3:
hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()
RISC-V: virt: This is a "sifive,test1" test finisher
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Traditional PCI INTx for vfio devices can only perform well if using
an in-kernel irqchip. Therefore, vfio_intx_update() issues a warning
if an in kernel irqchip is not available.
We usually do have an in-kernel irqchip available for pseries machines
on POWER hosts. However, because the platform allows feature
negotiation of what interrupt controller model to use, we don't
currently initialize it until machine reset. vfio_intx_update() is
called (first) from vfio_realize() before that, so it can issue a
spurious warning, even if we will have an in kernel irqchip by the
time we need it.
To workaround this, make a call to spapr_irq_update_active_intc() from
spapr_irq_init() which is called at machine realize time, before the
vfio realize. This call will be pretty much obsoleted by the later
call at reset time, but it serves to suppress the spurious warning
from VFIO.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
pseries machine type can have one of two different interrupt controllers in
use depending on feature negotiation with the guest. Usually this is
invisible to devices, because they route to a common set of qemu_irqs which
in turn dispatch to the correct back end.
VFIO passthrough devices, however, wire themselves up directly to the KVM
irqchip for performance, which means they are affected by this change in
interrupt controller. To get them to adjust correctly for the change in
irqchip, we need to fire the kvm irqchip change notifier.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
VFIO PCI devices already respond to the pci intx routing notifier, in order
to update kernel irqchip mappings when routing is updated. However this
won't handle the case where the irqchip itself is replaced by a different
model while retaining the same routing. This case can happen on
the pseries machine type due to PAPR feature negotiation.
To handle that case, add a handler for the irqchip change notifier, which
does much the same thing as the routing notifier, but is unconditional,
rather than being a no-op when the routing hasn't changed.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
This splits the vfio_intx_update() function into one part doing the actual
reconnection with the KVM irqchip (vfio_intx_update(), now taking an
argument with the new routing) and vfio_intx_routing_notifier() which
handles calls to the pci device intx routing notifier and calling
vfio_intx_update() when necessary. This will make adding support for the
irqchip change notifier easier.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
This patch adds an optional function pointer, "sym_cb", to
riscv_load_kernel() which provides the possibility to access the symbol
table during kernel loading.
The pointer is ignored, if supplied with Image or uImage file.
The Spike board requires the access to locate the HTIF symbols.
Fixes: 0ac24d56c5 ("hw/riscv: Split out the boot functions")
Buglink: https://bugs.launchpad.net/qemu/+bug/1835827
Signed-off-by: Siwei Zhuang <siwei.zhuang@data61.csiro.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The test finisher implements the reset command, which means it's a
"sifive,test1" device. This is a backwards compatible change, so it's
also a "sifive,test0" device. I copied the odd idiom for adding a
two-string compatible field from the ARM virt board.
Fixes: 9a2551ed6f ("riscv: sifive_test: Add reset functionality")
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
# gpg: Signature made Mon 25 Nov 2019 15:30:56 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/virtio: return error when device_opts arg is NULL
net/virtio: fix re-plugging of primary device
net/virtio: return early when failover primary alread added
net/virtio: fix dev_unplug_pending
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
failover_replug_primary was returning true on failure which lead to
re-plug not working when a migration failed. Fix this by returning
success when hotplug worked. This is a bug that was missed in last
round of testing but was tested succesfully with this version. Also
make sure we don't pass NULL to qdev_set_parent_bus().
This fixes CID 1407224.
Fixes: 9711cd0dfc ("net/virtio: add failover support")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Bail out when primary device was already added before.
This avoids printing a wrong warning message during reboot.
Fixes: 9711cd0dfc ("net/virtio: add failover support")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
.dev_unplug_pending is set up by virtio-net code indepent of failover
support was set for the device or not. This gives a wrong result when
we check for existing primary devices in migration code.
Fix this by actually calling dev_unplug_pending() instead of just
checking if the function pointer was set. When the feature was not
negotiated dev_unplug_pending() will always return false. This prevents
us from going into the wait-unplug state when there's no primary device
present.
Fixes: 9711cd0dfc ("net/virtio: add failover support")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
