The RISC-V IOMMU spec predicts that the IOMMU can use translation caches
to hold entries from the DDT. This includes implementation for all cache
commands that are marked as 'not implemented'.
There are some artifacts included in the cache that predicts s-stage and
g-stage elements, although we don't support it yet. We'll introduce them
next.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This header will be used by the RISC-V IOMMU emulation to be added
in the next patch. Due to its size it's being sent in separate for
an easier review.
One thing to notice is that this header can be replaced by the future
Linux RISC-V IOMMU driver header, which would become a linux-header we
would import instead of keeping our own. The Linux implementation isn't
upstream yet so for now we'll have to manage riscv-iommu-bits.h.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.
While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with RISC-V.
No changes to generated config-devices.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'virt' machine makes assumptions on the Advanced Core-Local
Interruptor, or aclint, based on 'tcg_enabled()' conditionals. This
will impact MSI related tests support when adding a RISC-V 'virt' libqos
machine. The accelerator used in that case, 'qtest', isn't being
accounted for and we'll error out if we try to enable aclint.
Create a new virt_aclint_allowed() helper to gate the aclint code
considering both TCG and 'qtest' accelerators. The error message is
left untouched, mentioning TCG only, because we don't expect the
regular user to be aware of 'qtest'.
We want to add 'qtest' support for aclint only, leaving the TCG specific
bits out of it. This is done by changing the current format we use
today:
if (tcg_enabled()) {
if (s->have_aclint) { - aclint logic - }
else { - non-aclint, TCG logic - }
}
into:
if (virt_aclint_allowed() && s->have_aclint) {
- aclint logic -
} else if (tcg_enabled()) {
- non-aclint, TCG logic -
}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the initrd is placed at 128MB, which overlaps with the kernel
when it is large (for example syzbot kernels are). From the kernel side,
there is no reason we could not push the initrd further away in memory
to accommodate large kernels, so move the initrd at 512MB when possible.
The ideal solution would have been to place the initrd based on the
kernel size but we actually can't since the bss size is not known when
the image is loaded by load_image_targphys_as() and the initrd would
then overlap with this section.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240206154042.514698-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate SMBIOS tables for the RISC-V mach-virt.
Add CONFIG_SMBIOS=y to the RISC-V default config.
Set the default processor family in the type 4 table.
The implementation is based on the corresponding ARM and Loongson code.
With the patch the following firmware tables are provided:
etc/smbios/smbios-anchor
etc/smbios/smbios-tables
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-4-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A few months ago I submitted a patch to various lists, deprecating
"riscv,isa" with a lengthy commit message [0] that is now commit
aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux
kernel tree. Primarily, the goal was to replace "riscv,isa" with a new
set of properties that allowed for strictly defining the meaning of
various extensions, where "riscv,isa" was tied to whatever definitions
inflicted upon us by the ISA manual, which have seen some variance over
time.
Two new properties were introduced: "riscv,isa-base" and
"riscv,isa-extensions". The former is a simple string to communicate the
base ISA implemented by a hart and the latter an array of strings used
to communicate the set of ISA extensions supported, per the definitions
of each substring in extensions.yaml [1]. A beneficial side effect was
also the ability to define vendor extensions in a more "official" way,
as the ISA manual and other RVI specifications only covered the format
for vendor extensions in the ISA string, but not the meaning of vendor
extensions, for obvious reasons.
Add support for setting these two new properties in the devicetrees for
the various devicetree platforms supported by QEMU for RISC-V. The Linux
kernel already supports parsing ISA extensions from these new
properties, and documenting them in the dt-binding is a requirement for
new extension detection being added to the kernel.
A side effect of the implementation is that the meaning for elements in
"riscv,isa" and in "riscv,isa-extensions" are now tied together as they
are constructed from the same source. The same applies to the ISA string
provided in ACPI tables, but there does not appear to be any strict
definitions of meanings in ACPI land either.
Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud>
[ Changes by AF:
- Rebase on recent changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a lot of cases where a char or an uint32_t pointer is used once
to alloc a string/array, read/written during the function, and then
g_free() at the end. There's no pointer re-use - a single alloc, a
single g_free().
Use 'g_autofree' to avoid the g_free() calls.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
