monitor_fdsets_cleanup() currently has three responsibilities:
1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). This is overly complicated, but ok.
2- Remove any file descriptors that have been passed into QEMU and
never duplicated[1,2]. A file descriptor without duplicates
indicates that no part of QEMU has made use of it. This is
problematic because the current implementation does it only if the
guest is not running and the monitor is closed.
3- Remove/free fdsets that have become empty due to the above
removals. This is ok.
The scenario described in (2) is starting to show some cracks now that
we're trying to consume fds from the migration code:
- Doing cleanup every time the last monitor connection closes works to
reap unused fds, but also has the side effect of forcing the
management layer to pass the file descriptors again in case of a
disconnect/re-connect, if that happened to be the only monitor
connection.
Another side effect is that removing an fd with qmp_remove_fd() is
effectively delayed until the last monitor connection closes.
The usage of mon_refcount is also problematic because it's racy.
- Checking runstate_is_running() skips the cleanup unless the VM is
running and avoids premature cleanup of the fds, but also has the
side effect of blocking the legitimate removal of an fd via
qmp_remove_fd() if the VM happens to be in another state.
This affects qmp_remove_fd() and qmp_query_fdsets() in particular
because requesting a removal at a bad time (guest stopped) might
cause an fd to never be removed, or to be removed at a much later
point in time, causing the query command to continue showing the
supposedly removed fd/fdset.
Note that file descriptors that *have* been duplicated are owned by
the code that uses them and will be removed after qemu_close() is
called. Therefore we've decided that the best course of action to
avoid the undesired side-effects is to stop managing non-duplicated
file descriptors.
1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect")
2- ebe52b592d ("monitor: Prevent removing fd from set during init")
Reviewed-by: Peter Xu <peterx@redhat.com>
[fix logic mistake: s/fdset_free/fdset_free_if_empty]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a test for file migration using fdset. The passing of fds is more
complex than using a file path. This is also the scenario where it's
most important we ensure that the initial migration stream offset is
respected because the fdset interface is the one used by the
management layer when providing a non empty migration file.
Note that fd passing is not available on Windows, so anything that
uses add-fd needs to exclude that platform.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When doing file migration, QEMU accepts an offset that should be
skipped when writing the migration stream to the file. The purpose of
the offset is to allow the management layer to put its own metadata at
the start of the file.
We have tests for this in migration-test, but only testing that the
migration stream starts at the correct offset and not that it actually
leaves the data intact. Unsurprisingly, there's been a bug in that
area that the tests didn't catch.
Fix the tests to write some data to the offset region and check that
it's actually there after the migration.
While here, switch to using g_get_file_contents() which is more
portable than mmap().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add qpl to compression method test for multifd migration
the qpl compression supports software path and hardware
path(IAA device), and the hardware path is used first by
default. If the hardware path is unavailable, it will
automatically fallback to the software path for testing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Similar to other archs, build a custom bios memory updater. Running the
test with OF code is a cool trick, but SLOF takes a long time to boot.
This reduces test time by around 3x (150s to 50s).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
ppc64 with TCG seems to no longer be failing this test, perhaps since
commit 03bfc2188f ("physmem: Fix migration dirty bitmap coherency
with TCG memory access") which is not ppc specific but was seen to hit
ppc64 quite easily.
Let's enable it again.
The s390x problem has been identified so mention it while we are
adjusting the comment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The spapr QEMU machine defaults is useful outside libqos, so create a
new header for ppc specific qtests and move it there.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
It is better to check if some older cpu models like 486, athlon, pentium,
penryn, phenom, core2duo etc are available before running their corresponding
tests. Some downstream distributions may no longer support these older cpu
models.
Signature of add_feature_test() has been modified to return void as
FeatureTestArgs* was not used by the caller.
One minor correction. Replaced 'phenom' with '486' in the test
'x86/cpuid/auto-level/phenom/arat' matching the cpu used.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-4-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added a new test api qtest_has_cpu_model() in order to check availability of
some cpu models in the current QEMU binary. The specific architecture of the
QEMU binary is selected using the QTEST_QEMU_BINARY environment variable.
This api would be useful to run tests against some older cpu models after
checking if QEMU actually supported these models.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-3-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If analyze-migration.py cannot be run or crashes, the error is currently
ignored since the code only checks for nonzero values in case the child
exited properly. For example, if you run the test with a non-existing
Python interpreter, it still succeeds:
$ PYTHON=wrongpython QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/migration-test
...
# Running /x86_64/migration/analyze-script
# Using machine type: pc-q35-9.1
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name source,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/src_serial -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -uuid 11111111-1111-1111-1111-111111111111 -accel qtest
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name target,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/dest_serial -incoming tcp:127.0.0.1:0 -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -accel qtest
**
ERROR:../../devel/qemu/tests/qtest/migration-test.c:1603:test_analyze_script: code should not be reached
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
ok 2 /x86_64/migration/analyze-script
...
Let's better fail the test in case the child did not exit properly, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
On s390x, we recently had a regression that broke migration / savevm
(see commit bebe9603fc ("hw/intc/s390_flic: Fix crash that occurs when
saving the machine state"). The problem was merged without being noticed
since we currently do not run any migration / savevm related tests on
x86 hosts.
While we currently cannot run all migration tests for the s390x target
on x86 hosts yet (due to some unresolved issues with TCG), we can at
least run some of the non-live tests to avoid such problems in the future.
Thus enable the "analyze-script" and the "bad_dest" tests before checking
for KVM on s390x or ppc64 (this also fixes the problem that the
"analyze-script" test was not run on s390x at all anymore since it got
disabled again by accident in a previous refactoring of the code).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Do the bare minimum to ensure that at least a vanilla
--without-default-devices build works for all targets except i386,
x86_64 and ppc64. In particular this fixes s390x-softmmu; i386 and
x86_64 have about a dozen failing tests that do not pass -M and therefore
require a default machine type; ppc64 has the same issue, though only
with numa-test.
If we can for now ignore the cases where boards and devices are picked
by hand, drive_del-test however can be fixed easily; almost all tests
check for the virtio-blk or virtio-scsi device that they use, and are
already skipped. Only one didn't get the memo; plus another one does
not need a machine at all and can be run with -M none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Verify that the ATA command READ NATIVE MAX ADDRESS returns the last
valid CHS tuple for the native device rather than any limit
established by INITIALIZE DEVICE PARAMETERS.
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-2-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Misc HW patch queue
- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
- Various cleanups (Thomas, Zhao, Inès, Bernhard)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t
# wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B
# uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn
# zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA
# MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i
# Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/
# aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp
# l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2
# zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp
# gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY
# SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95
# 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0=
# =tm+U
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits)
hw/core: Support module-id in numa configuration
hw/core: Introduce module-id as the topology subindex
hw/core/machine: Support modules in -smp
hw/core/machine: Introduce the module as a CPU topology level
hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init()
hw/misc : Correct 5 spaces indents in stm32l4x5_exti
hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h'
hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc
hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean
hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean
hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean
hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device
hw: Fix problem with the A*MPCORE switches in the Kconfig files
hw/riscv/virt: Replace sprintf by g_strdup_printf
hw/misc/imx: Replace sprintf() by snprintf()
hw/misc/applesmc: Simplify DeviceReset handler
target/i386: Move APIC related code to cpu-apic.c
hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h
scripts: add script to compare compatibility properties
python/qemu/machine: add method to retrieve QEMUMachine::binary field
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To control that creating new machine type doesn't affect the previous
types (their compat_props) and to check complex compat_props inheritance
we need qmp command to print machine type compatibility properties.
This patch adds the ability to get list of all the compat_props of the
corresponding supported machines for their comparison via new optional
argument of "query-machines" command. Since information on compatibility
properties can increase the command output by a factor of 40, add an
argument to enable it, default off.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-3-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
Refactor migrate_get_socket_address to internally utilize 'socket-address'
parameter, reducing redundancy in the function definition.
migrate_get_socket_address implicitly converts SocketAddress into str.
Move migrate_get_socket_address inside migrate_get_connect_uri which
should return the uri string instead.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-4-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The test mangles the GPIO address and the pin number in the
qtest_add_data_func data parameter. Doing so, it assumes that the host
pointer size is always 64-bit, which breaks on 32-bit :
../tests/qtest/stm32l4x5_gpio-test.c: In function ‘test_gpio_output_mode’:
../tests/qtest/stm32l4x5_gpio-test.c:272:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
272 | unsigned int pin = ((uint64_t)data) & 0xF;
| ^
../tests/qtest/stm32l4x5_gpio-test.c:273:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
273 | uint32_t gpio = ((uint64_t)data) >> 32;
| ^
To fix, improve the mangling of the GPIO address and pin number fields
by using GPIO_SIZE so that the resulting value fits in a 32-bit pointer.
While at it, include some helpers to hide the details.
Cc: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Cc: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329092747.298259-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The local 9p driver in virtio-9p-test.c its temporary dir right at the
start of qos-test (via virtio_9p_create_local_test_dir()) and only
deletes it after qos-test is finished (via
virtio_9p_remove_local_test_dir()).
This means that any qos-test machine that ends up running virtio-9p-test
local tests more than once will end up re-using the same temp dir. This
is what's happening in [1] after we introduced the riscv machine nodes:
if we enable slow tests with the '-m slow' flag using
qemu-system-riscv64, this is what happens:
- a temp dir is created;
- virtio-9p-device tests will run virtio-9p-test successfully;
- virtio-9p-pci tests will run virtio-9p-test, and fail right at the
first slow test at fs_create_dir() because the "01" file was already
created by fs_create_dir() test when running with the virtio-9p-device.
The root cause is that we're creating a single temporary dir, via the
construct/destruct callbacks, and this temp dir is kept for the entire
qos-test run.
We can change each test to clean after themselves. This approach would
make the 'create' tests obsolete since we would need to create and
delete dirs/files/symlinks for the cleanup, turning them into the
'unlinkat' tests that comes right after.
We chose a different approach that handles the root cause: do not use
constructor/destructor to create the temp dir. Create one temp dir for
each test, and remove it after the test is complete. This is the
approach taken for other qtests like vhost-user-test.c where each test
requires a setup() and a subsequent cleanup(), all of those instantiated
in the .before callback.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-2-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
