Windows with Hyper-V role enabled doesn't boot with 'hv-passthrough' when
no debugger is configured, this significantly limits the usefulness of the
feature as there's no support for subtracting Hyper-V features from CPU
flags at this moment (e.g. "-cpu host,hv-passthrough,-hv-syndbg" does not
work). While this is also theoretically fixable, 'hv-syndbg' is likely
very special and unneeded in the default set. Genuine Hyper-V doesn't seem
to enable it either.
Introduce 'skip_passthrough' flag to 'kvm_hyperv_properties' and use it as
one-off to skip 'hv-syndbg' when enabling features in 'hv-passthrough'
mode. Note, "-cpu host,hv-passthrough,hv-syndbg" can still be used if
needed.
As both 'hv-passthrough' and 'hv-syndbg' are debug features, the change
should not have any effect on production environments.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-3-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Putting HYPERV_FEAT_SYNDBG entry under "#ifdef CONFIG_SYNDBG" in
'kvm_hyperv_properties' array is wrong: as HYPERV_FEAT_SYNDBG is not
the highest feature number, the result is an empty (zeroed) entry in
the array (and not a skipped entry!). hyperv_feature_supported() is
designed to check that all CPUID bits are set but for a zeroed
feature in 'kvm_hyperv_properties' it returns 'true' so QEMU considers
HYPERV_FEAT_SYNDBG as always supported, regardless of whether KVM host
actually supports it.
To fix the issue, leave HYPERV_FEAT_SYNDBG's definition in
'kvm_hyperv_properties' array, there's nothing wrong in having it defined
even when 'CONFIG_SYNDBG' is not set. Instead, put "hv-syndbg" CPU property
under '#ifdef CONFIG_SYNDBG' to alter the existing behavior when the flag
is silently skipped in !CONFIG_SYNDBG builds.
Leave an 'assert' sentinel in hyperv_feature_supported() making sure there
are no 'holes' or improperly defined features in 'kvm_hyperv_properties'.
Fixes: d8701185f4 ("hw: hyperv: Initial commit for Synthetic Debugging device")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-2-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following 5 bits in CPUID.7.2.EDX are supported by KVM. Add their
supports in QEMU. Each of them indicates certain bits of IA32_SPEC_CTRL
are supported. Those bits can control CPU speculation behavior which can
be used to defend against side-channel attacks.
bit0: intel-psfd
if 1, indicates bit 7 of the IA32_SPEC_CTRL MSR is supported. Bit 7 of
this MSR disables Fast Store Forwarding Predictor without disabling
Speculative Store Bypass
bit1: ipred-ctrl
If 1, indicates bits 3 and 4 of the IA32_SPEC_CTRL MSR are supported.
Bit 3 of this MSR enables IPRED_DIS control for CPL3. Bit 4 of this
MSR enables IPRED_DIS control for CPL0/1/2
bit2: rrsba-ctrl
If 1, indicates bits 5 and 6 of the IA32_SPEC_CTRL MSR are supported.
Bit 5 of this MSR disables RRSBA behavior for CPL3. Bit 6 of this MSR
disables RRSBA behavior for CPL0/1/2
bit3: ddpd-u
If 1, indicates bit 8 of the IA32_SPEC_CTRL MSR is supported. Bit 8 of
this MSR disables Data Dependent Prefetcher.
bit4: bhi-ctrl
if 1, indicates bit 10 of the IA32_SPEC_CTRL MSR is supported. Bit 10
of this MSR enables BHI_DIS_S behavior.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20240919051011.118309-1-chao.gao@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- CPUID.(EAX=07H,ECX=0H):EBX[bit 6]: x87 FPU Data Pointer updated only
on x87 exceptions if 1.
- CPUID.(EAX=07H,ECX=0H):EBX[bit 13]: Deprecates FPU CS and FPU DS
values if 1. i.e., X87 FCS and FDS are always zero.
Define names for them so that they can be exposed to guest with -cpu host.
Also define the bit field MACROs so that named cpu models can add it as
well in the future.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for the shift
operation, exceeding the width of int type. And there is existing api
read_fcc() which is converted to u64 type with bitwise shift, it can be
used to dump fp registers into coredump note segment.
Resolves: Coverity CID 1561133
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240914064645.2099169-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.
Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.
Most of the places found using the following Coccinelle spatch script:
@@
identifier tmp;
constant val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_tl(tmp, val);
@@
identifier tmp;
int val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_i64(tmp, val);
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>
In commit 6d0cad1259 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>
Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.
Mechanical change using:
$ for n in UW UL UQ UO SW SL SQ; do \
sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
$(git grep -l MO_TE$n target/mips); \
done
manually remove superfluous parenthesis in nanoMIPS gen_save().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>
The TriCore architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/tricore/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-15-philmd@linaro.org>
The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>
The AVR architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/avr/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-11-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>
The Hexagon architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/hexagon/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-8-philmd@linaro.org>
The Alpha architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/alpha/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-7-philmd@linaro.org>
The Alpha target is only built for 64-bit.
Using ldtul_p() is pointless, replace by ldq_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldq_p/' $(git grep -wl ldtul_p target/alpha/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-4-philmd@linaro.org>
The Hexagon target is only built for 32-bit.
Using ldtul_p() is pointless, replace by ldl_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldl_p/' \
$(git grep -wl ldtul_p target/hexagon/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-3-philmd@linaro.org>
Add unimplemented-device blocks to the xilinx_zynq board
corresponding to various devices documented in the TRM
and in the device tree.
See: ug585-Zynq-7000-TRM manual B.3 (Module Summary)
Signed-off-by: Chao Liu <chao.liu@yeah.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message. Removed the clearing of
the ignore_memory_transaction_failures flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
