Split mode doesn't make sense on pseries, neither with XICS nor XIVE. But
passing kernel-irqchip=split silently behaves like kernel-irqchip=on.
Other architectures that support kernel-irqchip do terminate QEMU when
split mode is requested but not available though. Do the same with pseries
for consistency.
Similarly, passing kernel-irqchip=on,accel=tcg starts the machine with the
emulated interrupt controller, ie, behaves like kernel-irqchip=off. However,
when passing kernel-irqchip=on,accel=kvm, if we can't initialize the KVM
XICS for some reason, ie, xics_kvm_init() fails, then QEMU is terminated.
This is inconsistent. Terminate QEMU all the same when requesting the
in-kernel interrupt controller without KVM.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <154964986747.291716.2679312373018476920.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to handle a race condition in the MacOS 9 CUDA driver, a
delay was introduced when raising the VIA SR interrupt inspired by
similar code in MacOnLinux.
During original testing of the MacOS 9 patches it was found that the
30us delay used in MacOnLinux did not work reliably within QEMU, and a
value of 300us was required to function correctly.
Recent experiments have shown two things: firstly when booting Linux,
MacOS 9 and MacOS X the fast path which bypasses the delay is never
triggered once the OS kernel is loaded making it effectively
useless. Rather than leave this code in place where a guest could
potentially enable it by accident and break itself, we might as well
just remove it.
Secondly the previous reliability issues are no longer present, and
this value can be reduced down to 20us with no apparent ill
effects. This has the benefit of considerably improving the
responsiveness of the ADB keyboard and mouse within the guest.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that IRQ allocation has been split in two (first allocate IRQ numbers,
then claim them), if the claiming fails, we must release the IRQs.
Fixes: 4fe75a8ccd "spapr: split the IRQ allocation sequence"
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All this code is used with both the XICS and XIVE interrupt controllers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 47973a2dbf we split the last generic chipset out of the PC
board, but forgot to remove the include of "hw/i386/pc.h".
Since it is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In commit 91c1e9fcbd where we added dual-CPU support to
the ARMSSE, we set up the wiring of the expansion IRQs via nested
loops: the outer loop on 'i' loops for each CPU, and the inner loop
on 'j' loops for each interrupt. Fix a typo which meant we were
wiring every expansion IRQ line to external IRQ 0 on CPU 0 and
to external IRQ 1 on CPU 1.
Fixes: 91c1e9fcbd ("hw/arm/armsse: Support dual-CPU configuration")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The code for handling the NVIC SHPR1 register intends to permit
byte and halfword accesses (as the architecture requires). However
the 'case' line for it only lists the base address of the
register, so attempts to access bytes other than the first one
end up in the "bad write" default logic. This bug was added
accidentally when we split out the SHPR1 logic from SHPR2 and
SHPR3 to support v6M.
Fixes: 7c9140afd5 ("nvic: Handle ARMv6-M SCS reserved registers")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
The Zephyr RTOS happens to access SHPR1 byte at a time,
which is how I spotted this.
MIPS queue for February 14th, 2019
# gpg: Signature made Thu 14 Feb 2019 16:48:39 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-14-2019:
tests/tcg: target/mips: Add tests for MSA logic instructions
tests/tcg: target/mips: Add wrappers for MSA logic instructions
tests/tcg: target/mips: Add tests for MSA interleave instructions
tests/tcg: target/mips: Add wrappers for MSA interleave instructions
tests/tcg: target/mips: Add tests for MSA bit counting instructions
tests/tcg: target/mips: Add wrappers for MSA bit counting instructions
tests/tcg: target/mips: Add a header with test utilities
tests/tcg: target/mips: Add a header with test inputs
tests/tcg: target/mips: Remove an unnecessary file
target/mips: introduce MTTCG-enabled builds
hw/mips_cpc: kick a VP when putting it into Run statewq
target/mips: hold BQL in mips_vpe_wake()
hw/mips_int: hold BQL for all interrupt requests
target/mips: reimplement SC instruction emulation and use cmpxchg
target/mips: compare virtual addresses in LL/SC sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While testing mttcg VP0 could get stuck in a loop waiting for other
VPs to come up (which never actually happens). To fix this, kick VPs
while they are being powered up by Cluster Power Controller in an
async task which is triggered once the host thread is being spawned.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make sure BQL is held for all interrupt requests.
For MTTCG-enabled configurations, handling soft and hard interrupts
between vCPUs must be properly locked. By acquiring BQL, make sure
all paths triggering an IRQ are synchronized.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Chardev fixes
# gpg: Signature made Wed 13 Feb 2019 16:18:36 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chardev-pull-request: (25 commits)
char-pty: remove write_lock usage
char-pty: remove the check for connection on write
chardev: add a note about frontend sources and context switch
terminal3270: do not use backend timer sources
char: update the mux handlers in class callback
chardev/wctablet: Fix a typo
char: allow specifying a GMainContext at opening time
chardev: ensure termios is fully initialized
tests: expand coverage of socket chardev test
chardev: fix race with client connections in tcp_chr_wait_connected
chardev: disallow TLS/telnet/websocket with tcp_chr_wait_connected
chardev: honour the reconnect setting in tcp_chr_wait_connected
chardev: use a state machine for socket connection state
chardev: split up qmp_chardev_open_socket connection code
chardev: split tcp_chr_wait_connected into two methods
chardev: remove unused 'sioc' variable & cleanup paths
chardev: ensure qemu_chr_parse_compat reports missing driver error
chardev: remove many local variables in qemu_chr_parse_socket
chardev: forbid 'wait' option with client sockets
chardev: forbid 'reconnect' option with server sockets
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RISC-V Patches for the 4.0 Soft Freeze, Part 1
This patch set contains a handful of patches I've collected over the
last few weeks. There's nothing really fundamental, but I thought it
would be good to send these out now as there are some other patch sets
on the mailing list that are getting ready to go.
As far as the actual patches, there's:
* A set that cleans up our FS dirty-mode handling.
* Support for writing MISA.
* The removal of Michael as a maintainer.
* A fix to {m,s}counteren handling.
* A fix to make sure the kernel's start address is computed correctly on
32-bit targets.
This makes my "RISC-V Patches for 3.2, Part 3" pull request defunct, as
it contains the same patches but based on a newer master. As usual,
I've tested this using a Fedora boot on the latest Linux. This patch
set does not include Bastian's decodetree patches because there were
some merge conflicts and while I've cleaned them up I want to get a
round of review first.
# gpg: Signature made Wed 13 Feb 2019 15:37:50 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-sf1:
riscv: Ensure the kernel start address is correctly cast
target/riscv: fix counter-enable checks in ctr()
MAINTAINERS: Remove Michael Clark as a RISC-V Maintainer
RISC-V: Add misa runtime write support
RISC-V: Add misa.MAFD checks to translate
RISC-V: Add misa to DisasContext
RISC-V: Add priv_ver to DisasContext
RISC-V: Use riscv prefix consistently on cpu helpers
RISC-V: Implement mstatus.TSR/TW/TVM
RISC-V: Mark mstatus.fs dirty
RISC-V: Split out mstatus_fs from tb_flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sun4uv_init() function expects vga_interface_type to be either
VGA_STD or VGA_NONE and sets up a stdvga device or no vga card
accordingly.
However, the code in vl.c prefers the Cirrus VGA card to stdvga if
it is available and the user and the machine did not specify anything
else.
So far this has not been a problem, since the Cirrus VGA was not linked
into the sparc64 target. But with the upcoming Kconfig build system,
all theoretically possible PCI cards will be enabled by default, so the
Cirrus VGA card might become available on the sparc64 target, too. vl.c
then picks the wrong card, causing sun4uv_init() to abort.
Thus let's make it explicit that we always want stdvga for sparc64 and
so set default_display = "std" for these machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1550041639-10232-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit caa1ee43 "vhost-user-blk: add discard/write zeroes features
support" added fields to struct virtio_blk_config. This changes
the size of the config space and breaks migration from QEMU 3.1
and older:
qemu-system-ppc64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0
qemu-system-ppc64: Failed to load PCIDevice:config
qemu-system-ppc64: Failed to load virtio-blk:virtio
qemu-system-ppc64: error while loading state for instance 0x0 of device 'pci@800000020000000:01.0/virtio-blk'
qemu-system-ppc64: load of migration failed: Invalid argument
Since virtio-blk doesn't support the "discard" and "write zeroes"
features, it shouldn't even expose the associated fields in the
config space actually. Just include all fields up to num_queues to
match QEMU 3.1 and older.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1550022537-27565-1-git-send-email-changpeng.liu@intel.com
Message-Id: <1550022537-27565-1-git-send-email-changpeng.liu@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cast the kernel start address to the target bit length.
This ensures that we calculate the initrd offset to a valid address for
the architecture.
Steps to reproduce the original problem (reported by Alex):
Build U-Boot for the virt machine for riscv32. Then run it with
$ qemu-system-riscv32 -M virt -kernel u-boot -nographic -initrd <a file>
You can find the initrd address with
U-Boot# fdt addr $fdtcontroladdr
U-Boot# fdt ls /chosen
Then take a peek at that address:
U-Boot# md.b <addr>
and you will see that there is nothing there without this patch. The
reason is that the binary was loaded to a negative address.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Reported-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Trivial patches:
* Update copyright
* Fix LGPL in target/moxie
* configure portability fix
* Drop useless inclusion of "hw/i386/pc.h"
* Mark the cpu-cluster device with user_creatable = false
* tsc210x: Fix building with no verbosity
# gpg: Signature made Wed 06 Feb 2019 15:27:35 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request:
hw/input/tsc210x: Fix building with no verbosity
hw/cpu/cluster: Mark the cpu-cluster device with user_creatable = false
hw/unicore32/puv3: Drop useless inclusion of "hw/i386/pc.h"
hw/sparc64/sun4u: Drop useless inclusion of "hw/i386/pc.h"
configure: Avoid non-portable 'test -o/-a'
target/moxie: Fix LGPL information in the file headers
qemu-common.h: Update copyright string for 2019
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to enable OpenBIOS to claim the initrd memory as in-use before attempting
to boot the kernel.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The sun4u/sun4v machine currently always creates a VGA device, even if
the user started QEMU with "-nodefaults" or "-vga none". That's likely
not what the users expect in this case, so add a check whether the VGA
adapter has really been requested.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When building with TSC_VERBOSE not defined, we get:
CC arm-softmmu/hw/input/tsc210x.o
hw/input/tsc210x.c: In function ‘tsc2102_data_register_write’:
hw/input/tsc210x.c:554:5: error: label at end of compound statement
default:
^~~~~~~
hw/input/tsc210x.c: In function ‘tsc2102_control_register_write’:
hw/input/tsc210x.c:638:5: error: label at end of compound statement
bad_reg:
^~~~~~~
hw/input/tsc210x.c: In function ‘tsc2102_audio_register_write’:
hw/input/tsc210x.c:766:5: error: label at end of compound statement
default:
^~~~~~~
make[1]: *** [rules.mak:69: hw/input/tsc210x.o] Error 1
Fix this by replacing the culprit fprintf(stderr) calls by a more
recent API: qemu_log_mask(LOG_GUEST_ERROR). Other fprintf() calls
are left untouched.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190204204517.23698-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The device can not be instantiated by the user and QEMU currently
aborts when you try to use it:
$ x86_64-softmmu/qemu-system-x86_64 -device cpu-cluster
qemu-system-x86_64: hw/cpu/cluster.c:73: cpu_cluster_realize:
Assertion `cbdata.cpu_count > 0' failed.
Aborted (core dumped)
Since this is an internal device only, mark it with user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1549371525-29899-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target-arm queue:
* Implement Armv8.5-BTI extension for system emulation mode
* Implement the PR_PAC_RESET_KEYS prctl() for linux-user mode's Armv8.3-PAuth support
* Support TBI (top-byte-ignore) properly for linux-user mode
* gdbstub: allow killing QEMU via vKill command
* hw/arm/boot: Support DTB autoload for firmware-only boots
* target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
# gpg: Signature made Tue 05 Feb 2019 17:04:22 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190205: (22 commits)
target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
hw/arm/boot: Support DTB autoload for firmware-only boots
hw/arm/boot: Clarify why arm_setup_firmware_boot() doesn't set env->boot_info
hw/arm/boot: Factor out "set up firmware boot" code
hw/arm/boot: Factor out "direct kernel boot" code into its own function
hw/arm/boot: Fix block comment style in arm_load_kernel()
gdbstub: allow killing QEMU via vKill command
target/arm: Enable TBI for user-only
target/arm: Compute TB_FLAGS for TBI for user-only
target/arm: Clean TBI for data operations in the translator
target/arm: Add TBFLAG_A64_TBID, split out gen_top_byte_ignore
tests/tcg/aarch64: Add pauth smoke test
linux-user: Implement PR_PAC_RESET_KEYS
target/arm: Enable BTI for -cpu max
target/arm: Set btype for indirect branches
target/arm: Reset btype for direct branches
target/arm: Default handling of BTYPE during translation
target/arm: Cache the GP bit for a page in MemTxAttrs
exec: Add target-specific tlb bits to MemTxAttrs
target/arm: Add BT and BTYPE to tb->flags
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes and improvements in tcg and the zPCI code.
# gpg: Signature made Tue 05 Feb 2019 16:36:09 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20190205:
s390x/pci: Unplug remaining requested devices on pcihost reset
s390x/pci: Warn when adding PCI devices without the 'zpci' feature
s390x/pci: Fix hotplugging of PCI bridges
s390x/pci: Fix primary bus number for PCI bridges
s390x/tcg: Don't model FP registers as globals
s390x/pci: mark zpci devices as unmigratable
s390x/pci: Drop release timer and replace it with a flag
s390x/pci: Introduce unplug requests and split unplug handler
s390x: remove direct reference to mem_path global from s390x code
target/s390x: define TCG_GUEST_DEFAULT_MO for MTTCG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_boot_info struct has a skip_dtb_autoload flag: if this is
set to true by the board code then arm_load_kernel() will not
load the DTB itself, but will leave this for the board code to
do itself later. However, the check for this is done in a
code path which is only executed for the case where we load
a kernel image file. If we're taking the "boot via firmware"
code path then the flag isn't honoured and the DTB is never
loaded.
We didn't notice this because the only real user of "boot
via firmware" that cares about the DTB is the virt board
(for UEFI boot), and that always wants skip_dtb_autoload
anyway. But the SBSA reference board model we're planning to
add will want the flag to behave correctly.
Now we've refactored the arm_load_kernel() function, the
fix is simple: drop the early 'return' so we fall into
the same "load the DTB" code the boot-direct-kernel path uses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190131112240.8395-6-peter.maydell@linaro.org
Factor out the "direct kernel boot" code path from arm_load_kernel()
into its own function; this function is getting long enough that
the code flow is a bit confusing.
This commit only moves code around; no semantic changes.
We leave the "load the dtb" code in arm_load_kernel() -- this
is currently only used by the "direct kernel boot" path, but
this is a bug which we will fix shortly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20190131112240.8395-3-peter.maydell@linaro.org
pci, pc, virtio: fixes, cleanups, features
vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Feb 2019 16:00:20 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
contrib/libvhost-user: cleanup casts
r2d: fix build on mingw
mmap-alloc: fix hugetlbfs misaligned length in ppc64
mmap-alloc: unfold qemu_ram_mmap()
i386, acpi: cleanup build_facs by removing second unused argument
fw_cfg: fix the life cycle and the name of "qemu_extra_params_fw"
acpi: Make TPM 2.0 with TIS available as MSFT0101
hw/virtio: Use CONFIG_VIRTIO_PCI switch instead of CONFIG_PCI
vhost-user-blk: add discard/write zeroes features support
contrib/vhost-user-blk: fix the compilation issue
pci/msi: export msi_is_masked()
intel_iommu: reset intr_enabled when system reset
intel_iommu: fix operator in vtd_switch_address_space
hw: virtio-pci: drop DO_UPCAST
include: update Linux headers to 4.21-rc1/5.0-rc1
scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1)
contrib/libvhost-user: switch to uint64_t
virtio: add checks for the size of the indirect table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Comment near strncpy explains kernel_cmdline does
not need to be 0-terminated.
Accordingly mark it as QEMU_NONSTRING.
Without this, gcc warns:
'strncpy' specified bound 256 equals destination size
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 19bcc4bc32 ("fw_cfg: Make qemu_extra_params_fw locally",
2019-01-04) changed the storage duration of the "qemu_extra_params_fw"
array from static to automatic. This broke the interface contract on the
fw_cfg_add_file() function, which is documented as follows, in
"include/hw/nvram/fw_cfg.h":
> [...] The data referenced by the starting pointer is only linked, NOT
> copied, into the data structure of the fw_cfg device. [...]
As a result, when guest firmware fetches the "etc/boot-menu-wait" fw_cfg
file, it now sees garbage. Fix the regression by changing the storage
duration to allocated. (The call is reached at most once, on the realize
path of the board-specific fw_cfg sysbus device.)
While at it, clean up the name and the assignment of the object as well.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 19bcc4bc32
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch makes the a TPM 2.0 with TIS interface available under the
HID 'MSF0101'. This is supported by Linux and also Windows now
recognizes the TPM 2.0 with TIS interface. Leave the TPM 1.2 as before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
For downstream s390x builds, we'd like to be able to build QEMU with
CONFIG_VIRTIO_PCI disabled (since virtio-ccw is used here instead),
but still with CONFIG_PCI enabled. This currently fails since the
virtio-*-pci.o files are still included in the build, but virtio-pci.o
is missing. Use the right config switch CONFIG_VIRTIO_PCI to exclude
the virtio-*-pci.o files from the build.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux commit 1f23816b8 "virtio_blk: add discard and write zeroes support"
added the support in the Guest kernel, while here also enable the features
support with vhost-user-blk driver. Also enable the test example utility
with DISCARD and WRITE ZEROES commands.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is going to be used later on outside MSI code to detect whether one
MSI vector is masked out.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is found when I was debugging another problem. Until now no bug
is reported with this but we'd better reset the IR status correctly
after a system reset.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
