Set the 2-NaN propagation rule explicitly in the float_status words
we use.
For active_fpu.fp_status, we do this in a new fp_reset() function
which mirrors the existing msa_reset() function in doing "first call
restore to set the fp status parts that depend on CPU state, then set
the fp status parts that are constant".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241025141254.2141506-5-peter.maydell@linaro.org
Similarly to commit 17c2c320f3 ("Introduce ase_mt_available helper"),
introduce the disas_mt_available() one which takes a DisasContext
argument to determine whether Multi-Threading is available by
checking the MT bit of the CP0_Config3 register.
Remove the then unused ASE_MT definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241024195447.44600-1-philmd@linaro.org>
Determine if the MIPS-3D ASE is implemented by checking
the state of the 3D bit in the FIR CP1 control register.
Remove the then unused ASE_MIPS3D definition.
Note, this allows using MIPS-3D on the mips64dspr2 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241021145832.34920-1-philmd@linaro.org>
Convert the following opcodes to decodetree:
- MULT.G - multiply 32-bit signed integers
- MULTU.G - multiply 32-bit unsigned integers
- DMULT.G - multiply 64-bit signed integers
- DMULTU.G - multiply 64-bit unsigned integers
Now that all opcodes from the extension have been converted, we
can remove completely gen_loongson_integer() and its 2 calls in
decode_opc_special2_legacy() and decode_opc_special3_legacy().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-9-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the following opcodes to decodetree:
- MOD.G - mod 32-bit signed integers
- MODU.G - mod 32-bit unsigned integers
- DMOD.G - mod 64-bit signed integers
- DMODU.G - mod 64-bit unsigned integers
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
DIV.G and DDIV.G are very similar. Provide gen_lext_DIV_G() a
'is_double' argument so it can generate DIV.G (divide 32-bit
signed integers).
With this commit we explicit the template used to generate
opcode for 32/64-bit word variants. Next commits will be less
verbose by providing both variants at once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no issue having multiple enum declarations with
the same value. As we are going to remove the OPC_MULT_G_2E
definition in few commits, restore the OPC_ADDUH_QB_DSP and
OPC_MUL_PH_DSP definitions and use them where they belong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since MULTU opcodes don't record the most significant bits
of the infinite result, sign-extending the sources make no
difference in the result.
Once we remove the sign extension of source registers, MULT
and MULTU are identical (as are DMULT and DMULTU).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.
Most of the places found using the following Coccinelle spatch script:
@@
identifier tmp;
constant val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_tl(tmp, val);
@@
identifier tmp;
int val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_i64(tmp, val);
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>
In commit 6d0cad1259 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>
Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.
Mechanical change using:
$ for n in UW UL UQ UO SW SL SQ; do \
sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
$(git grep -l MO_TE$n target/mips); \
done
manually remove superfluous parenthesis in nanoMIPS gen_save().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>
When refactoring page_table_walk_refill() in commit 4e999bf419
we missed the indirect call to cpu_mmu_index() in get_pte():
page_table_walk_refill()
-> get_pte()
-> cpu_ld[lq]_code()
-> cpu_mmu_index()
Since we don't mask anymore the modes in hflags, cpu_mmu_index()
can return UM or SM, while we only expect KM or ERL.
Fix by propagating ptw_mmu_idx to get_pte(), and use the
cpu_ld/st_code_mmu() API with the correct MemOpIdx.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2470
Fixes: 4e999bf419 ("target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240814090452.2591-3-philmd@linaro.org>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Board reset requires writing a fresh CPU state. As far as KVM is
concerned, the only thing that blocks reset is that CPU state is
encrypted; therefore, kvm_cpus_are_resettable() can simply check
if that is the case.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since CPU() macro is a simple cast, the following are equivalent:
Object *obj;
CPUState *cs = CPU(obj)
In order to ease static analysis when running
scripts/coccinelle/cpu_env.cocci from the previous commit,
replace:
- CPU_GET_CLASS(cpu);
+ CPU_GET_CLASS(obj);
Most code use the 'cs' variable name for CPUState handle.
Replace few 's' -> 'cs' to unify cpu_reset_hold() style.
No logical change in this patch.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
