GDB 15 does not like exit() anymore:
(gdb) python exit(0)
Python Exception <class 'SystemExit'>: 0
Error occurred in Python: 0
Use the GDB's own exit command, like it's already done in a couple
places, everywhere. This is the same fix as commit 93a3048dcf
("tests: Gently exit from GDB when tests complete"), but applied to
more places.
Acked-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20241022113939.19989-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Test the lowest and the highest real-time signals. This requires
configuring the real-time signal mapping, and therefore some knowledge
about the host. To this end, pass the emulator path in the QEMU
environment variable to all tests (this should not disturb the existing
ones), and assume that all hosts have signals 36-39 available.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241029232211.206766-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At first I thought I could compile the user-mode test for system mode
however we already have a fairly comprehensive test case for system
mode in "memory" so lets use that.
As tracking every access will quickly build up with "print-access" we
add a new mode to track groups of reads and writes to regions. Because
the test_data is 16k aligned we can be sure all accesses to it are
ones we can count.
First we extend the test to report where the test_data region is. Then
we expand the pdot() function to track the total number of reads and
writes to the region. We have to add some addition pdot() calls to
take into account multiple reads/writes in the test loops.
Finally we add a python script to integrate the data from the plugin
and the output of the test and validate they both agree on the total
counts. As some boot codes clear the bss we also add a flag to add a
regions worth of writes to the expected total.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-14-alex.bennee@linaro.org>
While the compilers will generally happily synthesise a 64 bit value
for you on 32 bit systems it doesn't exercise anything on QEMU. It
also makes it hard to accurately compare the accesses to test_data
when instrumenting.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-12-alex.bennee@linaro.org>
This is useful information when debugging memory issues so lets
improve by:
- include the ptr address for u8 fills (like the others)
- indicate the number of operations for reads and writes
- explicitly note when we are flushing
- move the fill printf to after the reset
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-11-alex.bennee@linaro.org>
Add an explicit test to check expected memory values are read/written.
8,16,32 load/store are tested for all arch.
64,128 load/store are tested for aarch64/x64.
atomic operations (8,16,32,64) are tested for x64 only.
By default, atomic accesses are non atomic if a single cpu is running,
so we force creation of a second one by creating a new thread first.
load/store helpers code path can't be triggered easily in user mode (no
softmmu), so we can't test it here.
Output of test-plugin-mem-access.c is the list of expected patterns in
plugin output. By reading stdout, we can compare to plugins output and
have a multiarch test.
Can be run with:
make -C build/tests/tcg/$ARCH-linux-user run-plugin-test-plugin-mem-access-with-libmem.so
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910172033.1427812-7-pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-10-alex.bennee@linaro.org>
Add a regression test for a recently fixed issue, where shmat()
desynced the guest and the host view of the address space and caused
open("/proc/self/maps") to SEGV.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <jwyuvao4apydvykmsnvacwshdgy3ixv7qvkh4dbxm3jkwgnttw@k4wpaayou7oq>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
My default header template is GPLv3 but for QEMU code we really should
stick to GPLv2-or-later (allowing others to up-license it if they
wish). While this is test code we should still be consistent on the
source distribution.
I wrote all of this code so its not a problem. However there remains
one GPLv3 file left which is the crt0-tc2x.S for TriCore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-2-alex.bennee@linaro.org>
The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.
Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both the report() function as well as the initial gdbstub test sequence
are copy-pasted into ~10 files with slight modifications. This
indicates that they are indeed generic, so factor them out. While
at it, add a few newlines to make the formatting closer to PEP-8.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The reason the ppc64 and s390x test where failing was because gdb
hides them although they are still accessible via regnum. We can
re-arrange the test a little bit and include these two arches in our
test.
We also need to be a bit more careful handling remote-registers as the
format isn't easily parsed with pure white space separation. Once we
fold types like "long long" and "long double" into a single word we
can now assert all registers are either listed or elided.
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <qemu-s390x@nongnu.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: <qemu-ppc@nongnu.org>
Cc: Luis Machado <luis.machado@arm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231121153606.542101-1-alex.bennee@linaro.org>
We already do a couple of "info registers" for specific tests but this
is a more comprehensive multiarch test. It also has some output
helpful for debugging the gdbstub by showing which XML features are
advertised and what the underlying register numbers are.
My initial motivation was to see if there are any duplicate register
names exposed via the gdbstub while I was reviewing the proposed
register interface for TCG plugins.
Mismatches between the xml and remote-desc are reported for debugging
but do not fail the test.
We also skip the tests for the following arches for now until we can
investigate and fix any issues:
- s390x (fails to read v0l->v15l, not seen in remote-registers)
- ppc64 (fails to read vs0h->vs31h, not seen in remote-registers)
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-7-alex.bennee@linaro.org>
Unify HAVE_GDB_BIN (currently in config-host.mak) and
HOST_GDB_SUPPORTS_ARCH into a single GDB variable in
config-target.mak.
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The latest hexagon compiler picks up that we never consume wcount.
Given the name of the #define that rcount checks against is WCOUNT_MAX
I figured the check just got missed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-5-alex.bennee@linaro.org>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Almost all invocations of run-test have either "$* on $(TARGET_NAME)"
or "$< on $(TARGET_NAME)" as the last argument. So provide a default
test name, while allowing an escape hatch for custom names.
As an additional simplification, remove the need to do shell quoting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-24-alex.bennee@linaro.org>
test_socket hangs randomly in connect(), especially when run without
qemu. Apparently the reason is that linux started treating backlog
value of 0 literally instead of rounding it up since v4.4 (commit
ef547f2ac16b).
So set it to 1 instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220725144251.192720-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
System emulation tests do not run in a hosted environment, since they
do not link with libc. They should only use freestanding headers
(float.h, limits.h, stdarg.h, stddef.h, stdbool.h, stdint.h,
stdalign.h, stdnoreturn.h) and should be compiled with -ffreestanding
in order to use the compiler implementation of those headers
rather than the one in libc.
Some tests are using inttypes.h instead of stdint.h, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
