The main problem is that "check-venv" is a .PHONY target will always
evaluate and trigger a full re-build of the VM images. While its
tempting to drop it from the dependencies that does introduce a
breakage on freshly configured builds.
Fortunately we do have the otherwise redundant --force flag for the
script which up until now was always on. If we make the usage of
--force conditional on dependencies other than check-venv triggering
the update we can avoid the costly rebuild and still run cleanly on a
fresh checkout.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2118
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-4-alex.bennee@linaro.org>
My default header template is GPLv3 but for QEMU code we really should
stick to GPLv2-or-later (allowing others to up-license it if they
wish). While this is test code we should still be consistent on the
source distribution.
I wrote all of this code so its not a problem. However there remains
one GPLv3 file left which is the crt0-tc2x.S for TriCore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-2-alex.bennee@linaro.org>
QAPIDoc stores a reference to QAPIParser just to pass it to
QAPIParseError. The resulting error position depends on the state of
the parser. It happens to be the current comment line. Servicable,
but action at a distance.
The commit before previous moved most uses of QAPIParseError from
QAPIDoc to QAPIParser. There are just three left. Convert them to
QAPISemError. This involves passing info to a few methods. Then drop
the reference to QAPIParser.
The three errors lose the column number. Not really interesting here:
it's the comment line's indentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-17-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The parser recognizes only the first "Features:" line. Any subsequent
ones are treated as ordinary text, as visible in test case
doc-duplicate-features. Recognize "Features:" lines anywhere. A
second one is an error.
A 'Features:' line without any features is useless, but not an error.
Make it an error. This makes detecting a second "Features:" line
easier.
qapi/run-state.json actually has an instance of this since commit
fe17522d85 (qapi: Remove deprecated 'singlestep' member of
StatusInfo). Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-16-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The parser mostly doesn't create adjacent untagged sections, and
merging the ones it does create is hardly worth the bother. I'm doing
it to avoid behavioral change in the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By convention, we indent the second and subsequent lines of
descriptions and tagged sections, except for examples.
Turn this into a hard rule, and apply it to examples, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforward conflicts in qapi/migration.json resolved]
docs/devel/qapi-code-gen.txt claims "A heading line must be the first
line of the documentation comment block" since commit
55ec69f8b1 (docs/devel/qapi-code-gen.txt: Update to new rST backend
conventions). Not true, we have code to make it work anywhere in a
free-form doc comment: commit dcdc07a97c (qapi: Make section headings
start a new doc comment block).
Make it true, for simplicity's sake.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the previous commit, QAPIDoc.Section.name is either
None (untagged section) or the section's tag string ('Returns',
'@name', ...). Rename it to .tag.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Improve the message for an empty tagged section from
empty doc section 'Note'
to
text required after 'Note:'
and the message for an empty argument or feature description from
empty doc section 'foo'
to
text required after '@foo:'
Improve the error position to refer to the beginning of the empty
section instead of its end.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When something other than a command has a "Returns" section, the error
message points to the beginning of the definition comment. Point to
the "Returns" section instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When documented arguments don't exist, the error message points to the
beginning of the definition comment. Point to the first bogus
argument description instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A 'Features:' line without any features is useless, but not an error
now. However, a later commit will make it one, because that makes
rejecting duplicate 'Features:' easier.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't actually recognize the second 'Features:' line. Instead, we
treat it as an untagged section.
If it was followed by feature description, we'd reject that like
"description of '@feat2:' follows a section". Less than clear.
To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-3-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The test compares Sphinx plain-text output against a golden reference.
To work on Windows hosts, it filters out carriage returns in both
files. Unfortunately, the filter doesn't work: it creates an empty
file. Comparing empty files always succeeds.
Fix the filter, and update the golden reference to current Sphinx
output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-2-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The powernv and pseries machines both provide hypervisor facilities
that are supported by KVM. This is a large and complicated set of
features that don't get much system-level testing in ppc tests.
Add a new test case for these which runs QEMU KVM inside the target.
This downloads an Alpine VM image, boots it and downloads and installs
the qemu package, then boots a virtual machine under it, re-using the
original Alpine VM image.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
ppc has no avocado tests for the KVM backend. Add a KVM boot_linux.py
test for pseries.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER CPUs support hash and radix MMU modes. Linux supports running in
either mode, but defaults to radix. To keep up testing of QEMU's hash
MMU implementation, add some Linux hash boot tests.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The expected MTD partition detection output does not always appear on
the console, despite the test reaching the boot loader and the string
appearing in dmesg. Possibly due to an init script that quietens the
console output. Using an earlier log message improves reliability.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc64 and s390x tests were first marked skipIf GITLAB_CI by commit
c0c8687ef0 ("tests/avocado: disable BootLinuxPPC64 test in CI"), and
commit 0f26d94ec9 ("tests/acceptance: skip s390x_ccw_vrtio_tcg on
GitLab") due to being very heavy-weight for gitlab CI.
Commit 9b45cc9931 ("docs/devel: rationalise unstable gitlab tests under
FLAKY_TESTS") changed this to being flaky but it isn't really, it just
had a long runtime.
So take the SPEED=slow variable from qtests and introduce it to avocado,
and make these tests require it.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When compiling with "configure --without-default-devices", the
dbus-display-test fails since it implicitly assumes that the
machine comes with a default console.
There doesn't seem to be an easy way to figure this during build time,
so skip the tests requiring the Console interface at runtime.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240221073759.171443-1-marcandre.lureau@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If "configure" has been run with "--without-default-devices", there is
no e1000 device in the binaries, so the boot-serial-test currently fails
in that case since it tries to use the e1000 with the sam460ex machine.
Since we're testing the serial output here, and not the NIC, let's
simply switch to the "pci-bridge" device here instead, which should
always be there for PCI-based machines like the sam460ex.
Message-ID: <20240219111030.384158-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cdrom test skips to execute on LoongArch system with command
"make check", this patch enables cdrom test for LoongArch virt
machine platform.
With this patch, cdrom test passes to run on LoongArch virt
machine type.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240217100230.134042-1-maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit effd60c8 changed how QMP commands are processed, the order
of the block-commit return value and job events in iotests 144 wasn't
fixed and more and caused the test to fail intermittently.
Change the test to cache events first and then print them in a
predefined order.
Waiting three times for JOB_STATUS_CHANGE is a bit uglier than just
waiting for the JOB_STATUS_CHANGE that has "status": "ready", but the
tooling we have doesn't seem to allow the latter easily.
Fixes: effd60c878
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2126
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20240209173103.239994-1-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently QEMU will warn if there is a NIC on the board that
is not connected to a backend. By default the '-nic user' will
get used for all NICs, but if you manually connect a specific
NIC to a specific backend, then the other NICs on the board
have no backend and will be warned about:
qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer
qemu-system-arm: warning: nic npcm-gmac.0 has no peer
qemu-system-arm: warning: nic npcm-gmac.1 has no peer
So suppress those warnings by manually connecting every NIC
on the board to some backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240206171231.396392-3-peter.maydell@linaro.org
We deliberately don't include qtests_npcm7xx in qtests_aarch64,
because we already get the coverage of those tests via qtests_arm,
and we don't want to use extra CI minutes testing them twice.
In commit 327b680877 we added it to qtests_aarch64; revert
that change.
Fixes: 327b680877 ("tests/qtest: Creating qtest for GMAC Module")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206163043.315535-1-peter.maydell@linaro.org
The _STA value returned currently indicates the ACPI0017 device
is not enabled. Whilst this isn't a real device, setting _STA
like this may prevent an OS from enumerating it correctly and
hence from parsing the CEDT table.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
