These are three more markers for string operation optimizations.
They can all be added to TCG, whose string operations are more or
less as fast as they can be for short lengths.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fast short REP MOVS can be added to TCG, since a trivial translation
of string operation is a good option for short lengths.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM *DECLARE* macros expect a typedef as first argument,
not a structure. Replace 'struct IRQState' by 'IRQState'
to avoid when modifying the macros:
../hw/core/irq.c:29:1: error: declaration of anonymous struct must be a definition
DECLARE_INSTANCE_CHECKER(struct IRQState, IRQ,
^
Use OBJECT_DECLARE_SIMPLE_TYPE instead of DECLARE_INSTANCE_CHECKER.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test currently fails when run on a host for which the QEMU target
has no default machine set:
ERROR| Output: qemu-system-aarch64: No machine specified, and there is
no default
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This struct has no dependencies on TCG code and it is being used in
target/arm/ptw.c to simplify the passing around of page table walk
results. Those routines can be reached by KVM code via the gdbstub
breakpoint code, so take the structure out of CONFIG_TCG to make it
visible when building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is needed by common code (ptw.c), so move it along with
the other regime_* functions in internal.h. When we enable the build
without TCG, the tlb_helper.c file will not be present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next few patches will move helpers under CONFIG_TCG. We'd prefer
to keep the debug helpers and debug registers close together, so
rearrange the file a bit to be able to wrap the helpers with a TCG
ifdef.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Python 3.6 is at end-of-life. Update the libvirt-ci module to a
version that supports overrides for targets and package mappings;
this way, QEMU can use the newer versions provided by CentOS 8 (Python
3.8) and OpenSUSE 15.3 (Python 3.9).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shorten a bit the description of what libvirt-ci does, the name of the
data files is not relevant at that point. However, the procedures to add
new build prerequisites are lacking some information, particularly with
respect to regenerating the output test files for lcitool's unit tests.
While at it, also update the paths in the libvirt-ci repository.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment, we look for just "python3" and "python", which is good
enough almost all of the time. But ... if you are on a platform that
uses an older Python by default and only offers a newer Python as an
option, you'll have to specify --python=/usr/bin/foo every time.
We can be kind and instead make a cursory attempt to locate a suitable
Python binary ourselves, looking for the remaining well-known binaries.
This configure loop will prefer, in order:
1. Whatever is specified in $PYTHON
2. python3
3. python
4. python3.11 down through python3.6
Notes:
- Python virtual environment provides binaries for "python3", "python",
and whichever version you used to create the venv,
e.g. "python3.8". If configure is invoked from inside of a venv, this
configure loop will not "break out" of that venv unless that venv is
created using an explicitly non-suitable version of Python that we
cannot use.
- In the event that no suitable python is found, the first python found
is the version used to generate the human-readable error message.
- The error message isn't printed right away to allow later
configuration code to pick up an explicitly configured python.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If neither --python nor --meson are specified, Meson's generated
build.ninja will invoke Python script using the interpreter *that Meson
itself is running under*; not the one identified by configure.
This is only an issue if Meson's Python interpreter is not "the first
one in the path", which is the one that is used if --python is not
specified. A common case where this happen is when the "python3" binary
comes from a virtual environment but Meson is not installed (with pip)
in the virtual environment. In this case (presumably) whoever set up
the venv wanted to use the venv's Python interpreter to build QEMU,
while Meson might use a different one, for example an enterprise
distro's older runtime.
So, detect whether a virtual environment is setup, and if the virtual
environment does not have Meson, use the meson submodule. Meson will
then run under the virtual environment's Python interpreter.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once upon a time, "sphinx-build" on certain RPM platforms invoked
specifically a Python 2.x version, while "sphinx-build-3" was a distro
shim for the Python 3.x version.
These days, none of our supported platforms utilize a 2.x version, and
those that still have 'sphinx-build-3' make it a symbolic link to
'sphinx-build'. Not searching for 'sphinx-build-3' will prefer
pip/venv installed versions of sphinx if they're available.
This adds an extremely convenient ability to test document building
ability in QEMU across multiple versions of Sphinx for the purposes of
compatibility testing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230221012456.2607692-6-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When handling pull requests in the staging branch, it often happens
that one of the job fails due to a problem, so that the pull request
can't be merged. Peter/Richard/Stefan then informs the sender of the
pull request and continues by pushing the next pending pull request
from another subsystem maintainer. Now the problem is that there might
still be lots of other running jobs in the pipeline of the first pull
request, eating up precious CI minutes though the pipeline is not
needed anymore. We can avoid this by marking the jobs as "interruptible".
With this setting, the jobs from previous pipelines are automatically
terminated when pushing a new one. If someone does not like this auto-
matic termination, it can still be disabled in the settings of the
repository. See this URL for details:
https://docs.gitlab.com/ee/ci/yaml/index.html#interruptible
Message-Id: <20230223191343.1064274-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By using --enable-fdt=system we can make sure that the configure
script does not try to check out the "dtc" submodule. This should
help to safe some precious CI minutes in the long run.
While we're at it, also drop some now-redundant --enable-slirp
and --enable-capstone statements. These used to have the "=system"
suffix in the past, too, which has been dropped when the their
corresponding submodules had been removed. Since these features
are auto-enabled anyway now (since the containers have the right
libraries installed), we do not need the explicit --enable-...
statements anymore.
Message-Id: <20230207201447.566661-6-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can get rid of the build-coroutine-sigaltstack job by moving
the configure flags that should be tested here to other jobs:
Move --with-coroutine=sigaltstack to the build-system-debian job
(where the coroutines should get some more test coverage with
"make check-block", too) and --enable-trace-backends=ftrace to
the cross-s390x-kvm-only job.
Message-Id: <20230207201447.566661-4-thuth@redhat.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When qemu-keymap is not available on the host, and enable-xkbcommon
is specified, parallel make fails with:
% make clean
...
% make -j 32
...
FAILED: pc-bios/keymaps/is
./qemu-keymap -f pc-bios/keymaps/is -l is
/bin/sh: ./qemu-keymap: No such file or directory
... many similar messages ...
The code always runs find_program, rather than waiting to build
qemu-keymap, because it looks for CONFIG_XKBCOMMON in config_host
rather than config_host_data. Making serially succeeds, by soft
linking files from pc-bios/keymaps, but that is not the desired
result for enable-xkbcommon.
Examining all occurrences of 'in config_host' for similar bugs shows one
instance in the docs, which is also fixed here.
Fixes: 4113f4cfee ("meson: move xkbcommon to meson")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1675708442-74966-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling QEMU with "--enable-sanitizers --enable-xkbcommon --cc=clang"
there is a memory leak warning when running qemu-keymap:
$ ./qemu-keymap -f pc-bios/keymaps/de -l de
=================================================================
==610321==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 136 byte(s) in 1 object(s) allocated from:
#0 0x5642830d0820 in __interceptor_calloc.part.11 asan_malloc_linux.cpp.o
#1 0x7f31873b8d2b in xkb_state_new (/lib64/libxkbcommon.so.0+0x1dd2b) (BuildId: dd32581e2248833243f3f646324ae9b98469f025)
SUMMARY: AddressSanitizer: 136 byte(s) leaked in 1 allocation(s).
It can be silenced by properly releasing the "state" again
after it has been used.
Message-Id: <20230221122440.612281-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
