223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d5317 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
server->bus in _test_server_free() could be NULL, since TestServer
*dest in test_migrate() was not properly initialized like TestServer *s.
Added init_virtio_dev(dest) and uninit_virtio_dev(dest), so the fields
are properly set and when test_server_free(dest); is called, they can
be correctly freed.
The reason for that is init_virtio_dev() calls qpci_init_pc(), that
creates a QPCIBusPC * (returned as QPCIBus *), while test_server_free()
calls qpci_free_pc(), that frees the QPCIBus *. Not calling
init_virtio_dev() would leave the QPCIBus * of TestServer unset.
Problem came out once I modified pci-pc.c and pci-pc.h, modifying
QPCIBusPC by adding another field before QPCIBus bus. Re-running the
tests showed vhost-user-test failing.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-Id: <1530022733-29581-1-git-send-email-esposem@usi.ch>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.
This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.
The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.
[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we're rejecting what we ought to for file,
host_driver and host_cdrom drivers. Test that we're
seeing the deprecated message for block and chardevs
on the file driver.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
197 is one example where _make_test_img is used twice without stopping
the NBD server in between. An error will occur like this:
@@ -26,9 +26,13 @@
=== Partial final cluster ===
+qemu-img: TEST_DIR/t.IMGFMT: Failed to get "resize" lock
+Is another process using the image?
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1024
+Failed to find an available port: Address already in use
read 1024/1024 bytes at offset 0
Patch _make_test_img to stop the old qemu-nbd before starting a new one,
which fixes this problem, and similarly 215.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This step was left behind my mistake. As suggested by the echoed text,
the intention was to test two devices with the same image, with
different options. The behavior should be the same as two QEMU
processes. Complete it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We dumped something when network failure happens. We should avoid those
messages to be dumped when running the tests:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
OK
After the patch:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: OK
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Separate the old postcopy UNIX socket test into three steps, provide a
helper for each step. With these helpers, we can do more compliated
tests like postcopy recovery, while keep the codes shared.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix up merge with 2e295789 / Skip tests for ppc tcg
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Luks needs special parameters to operate the image. Since this test is
focusing on image fleecing, skip skip that format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The CMSDK timer behaviour is that an interrupt is triggered when the
counter counts down from 1 to 0; however one is not triggered if the
counter is manually set to 0 by a guest write to the counter register.
Currently ptimer can't handle this; add a policy option to allow
a ptimer user to request this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-2-peter.maydell@linaro.org
PPC tcg seems to be failing migration tests quite regularly;
we believe this is TCG bugs in dirty bit updating; it's
not clear why PPC fails more but lets skip for the moment.
$ ./tests/migration-test
/ppc64/migration/deprecated: OK
/ppc64/migration/bad_dest: Skipping test: kvm_hv not available OK
/ppc64/migration/postcopy/unix: Skipping test: kvm_hv not available OK
/ppc64/migration/precopy/unix: Skipping test: kvm_hv not available OK
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 20180706143105.93472-1-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Code coverage and other build tweaks
- revert 208ecb3e (and drop filter for mingw, tweak for check-tcg)
- some travis speed-ups
- modernise code coverage support
- docker image cleanups
- clean-up binfmt_misc docker infrastructure
- add debian-powerpc-user-cross image for ppc32 build
# gpg: Signature made Thu 05 Jul 2018 17:00:02 BST
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-code-coverage-and-build-tweaks-050718-3:
docker: add linux-user powered cross builder for QEMU
docker: add special rule for deboostrapped images
docker: add special handling for FROM:debian-%-user targets
docker: debian-bootstrap.pre allow customising of variant/url
docker: drop QEMU build-dep from bootstrap
docker: Do not run tests in 'intermediate' images
docker: Clean the MXE base image
docker: ubuntu: Use SDL2
docker: ubuntu: Update the package list before installing new ones
linux-user: add gcov support to preexit_cleanup
linux-user: introduce preexit_cleanup
build-system: add coverage-report target
build-system: add clean-coverage target
travis: add gcovr summary for GCOV build
docker: add gcovr to travis image
.gitignore: add .gcov files
build-system: remove per-test GCOV reporting
travis: test out-of-tree builds
travis: do not waste time cloning unused submodules
Revert "Makefile: Rename TARGET_DIRS to TARGET_LIST"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't use cross compilers in the current Debian stable and Debian
sid is sketchy as hell. So for powerpc fall back to dog-fooding our
own linux-user to do the build.
As we can only build the base image with a suitably configured
source tree we fall back to checking for its existence when we can't
build it from scratch. However this does mean you don't have to keep
a static powerpc-linux-user in your active configuration just to
update the cross build image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We might as well have a custom rule for this. For one thing the
dependencies are different. As the primary dependency for
docker-image-% could never be docker-image-debian-bootstrap we can
drop that test in the main rule as well.
Missing EXECUTABLE, DEB_ARCH and DEB_TYPE are treated as hard faults
now. We also error out if the EXECUTABLE file isn't there. We should
really do this with a dependency on any source rules but currently
subdir-FOO-linux-user isn't enough on a clean build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These will have been build with debootstrap so we need to check
against the debian-bootstrap dockerfile. This does mean sticking to
debian-FOO-user as the naming conventions for boot-strapped images.
The actual cross image is built on top.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We default to the buildd variant as most of our images are for
building. However lets give the user the ability to specify "minbase"
if they want to create a simple base image for experimentation.
Allowing the tweaking of DEB_URL means we can also bootstrap other
Debian based OS's. For example:
make docker-binfmt-image-debian-ubuntu-bionic-arm64 \
DEB_ARCH=arm64 DEB_TYPE=bionic \
DEB_VARIANT=minbase DEB_URL=http://ports.ubuntu.com/ \
EXECUTABLE=./aarch64-linux-user/qemu-aarch64
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is best done with any child images that actually need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We can still build the DOCKER_INTERMEDIATE_IMAGES images,
but they won't appear in 'make test*@$IMAGE'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Do not test the deprecated API versions (see cabd358407).
Debian MXE MinGW cross images are already using SDL2.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Useful for debugging if nothing else as the gcovr on the Travis images
are a little old.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I'm not entirely sure who's using this information and certainly in a
CI environment it just washes over as additional noise. Later patches
will provide new reporting options so a user who wants to analyse
individual tests will be able to use that to get the information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Block layer patches:
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
# gpg: Signature made Thu 05 Jul 2018 11:24:33 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Unlock FD after creation
file-posix: Fix creation locking
block/blklogwrites: Add an option for the update interval of the log superblock
block/blklogwrites: Add an option for appending to an old log
block/blklogwrites: Change log_sector_size from int64_t to uint64_t
block/crypto: Fix memory leak in create error path
block: Don't silently truncate node names
block: Add blklogwrites
block: Move two block permission constants to the relevant enum
qcow2: add compress threads
qcow2: refactor data compression
qemu-img: allow compressed not-in-order writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the user passes a too long node name string, we silently truncate it
to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart
from surprising the user when the node has a different name than
requested, this also bypasses the check for duplicate names, so that the
same name can be assigned to multiple nodes.
Fix this by just making too long node names an error.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d5317
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d5317.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
When OOB is enabled, out-of-band commands are executed right away,
everything else is queued. This lets out-of-band commands "jump the
queue".
However, certain errors are always reported right away, and therefore
can jump the queue even when the erroneous input does not request
out-of-band execution. These errors are pretty unlikely to occur in
production, but it's wrong all the same. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180703085358.13941-17-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
