Serial port console redirection table can be used for default serial
port selection, like chosen stdout-path selection with FDT method.
With acpi SPCR table added, early debug console can be parsed from
SPCR table with simple kernel parameter earlycon rather than
earlycon=uart,mmio,0x1fe001e0
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907073037.243353-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
One LoongArch virt machine platform, there is limitation for memory
map information. The minimum memory size is 256M and minimum memory
size for numa node0 is 256M also. With qemu numa qtest, it is possible
that memory size of numa node0 is 128M.
Limitations for minimum memory size for both total memory and numa
node0 is removed for acpi srat table creation.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240515093927.3453674-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with LoongArchVirtMachineState
*lvms.
Rename function specific for virtmachine loongarch_xxx()
with virt_xxx(). However some common functions keep unchanged such as
loongarch_acpi_setup()/loongarch_load_kernel(), since there functions
can be used for real hw boards.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-3-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE.
Machine name about Other real hw boards can be added in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-2-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The UEFI loading mode in loongarch is very different
from that in other architectures:loongarch's UEFI code
is in rom, while other architectures' UEFI code is in flash.
loongarch UEFI can be loaded as follows:
-machine virt,pflash=pflash0-format
-bios ./QEMU_EFI.fd
Other architectures load UEFI using the following methods:
-machine virt,pflash0=pflash0-format,pflash1=pflash1-format
loongarch's UEFI loading method makes qemu and libvirt incompatible
when using NVRAM, and the cost of loongarch's current loading method
far outweighs the benefits, so we decided to use the same UEFI loading
scheme as other architectures.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: maobibo@loongson.cn
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: zhaotianrui@loongson.cn
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <0bd892aa9b88e0f4cc904cb70efd0251fc1cde29.1708336919.git.lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In hw/acpi/aml-build.c:build_pptt() function, the code assumes that the
ACPI processor id equals to the cpu index, for example if we have 8
cpus, then the ACPI processor id should be in range 0-7.
However, in hw/loongarch/acpi-build.c:build_madt() function we broke the
assumption. If we have 8 cpus again, the ACPI processor id in MADT table
would be in range 1-8. It violates the following description taken from
ACPI spec 6.4 table 5.138:
If the processor structure represents an actual processor, this field
must match the value of ACPI processor ID field in the processor’s entry
in the MADT.
It will break the latest Linux 6.5-rc6 with the
following error message:
ACPI PPTT: PPTT table found, but unable to locate core 7 (8)
Invalid BIOS PPTT
Here 7 is the last cpu index, 8 is the ACPI processor id learned from
MADT.
With this patch, Linux can properly detect SMT threads when "-smp
8,sockets=1,cores=4,threads=2" is passed:
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 2
The detection of number of sockets is still wrong, but that is out of
scope of the commit.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20230820105658.99123-2-c@jia.je>
Signed-off-by: Song Gao <gaosong@loongson.cn>
For loongarch virt machine, add powerdown notification callback
and send ACPI_POWER_DOWN_STATUS event by acpi ged. Also add
acpi dsdt table for ACPI_POWER_BUTTON_DEVICE device in this
patch.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230303010548.295580-1-gaosong@loongson.cn>
In theory gsi base can start from 0 on loongarch virt machine,
however gsi base is hard-coded in linux kernel loongarch system,
else system fails to boot.
This patch renames macro PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE,
keeps value unchanged. GSI base is common concept in acpi spec
and easy to understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221228030719.991878-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Loongarch virt machine uses general hardware reduces acpi method, rather
than LS7A acpi device. Now only power management function is used in
acpi ged device, memory hotplug will be added later. Also acpi tables
such as RSDP/RSDT/FADT etc.
The acpi table has submited to acpi spec, and will release soon.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
