There are minimal differences from Qemu's point of view between the A0
and A1 silicon revisions.
As the A1 exercises different code paths in u-boot it is desirable to
emulate that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200504093703.261135-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CAS reboot flag is false by default and all the locations that
could set it to true have been dropped. This means that all code
blocks depending on the flag being set is dead code and the other
code blocks should be executed always.
Just do that and drop the now uneeded CAS reboot flag. Fix a
comment on the way to make checkpatch happy.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "ibm,client-architecture-support" ("CAS") is implemented
in SLOF and QEMU assists via the custom H_CAS hypercall which copies
an updated flatten device tree (FDT) blob to the SLOF memory which
it then uses to update its internal tree.
When we enable the OpenFirmware client interface in QEMU, we won't need
to copy the FDT to the guest as the client is expected to fetch
the device tree using the client interface.
This moves FDT rebuild out to a separate helper which is going to be
called from the "ibm,client-architecture-support" handler and leaves
writing FDT to the guest in the H_CAS handler.
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-3-aik@ozlabs.ru>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Merge tpm 2020/05/06 v1
# gpg: Signature made Wed 06 May 2020 15:16:17 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-05-06-1:
hw: add compat machines for 5.1
hw/arm/virt: Remove the compat forcing tpm-tis-device PPI to off
tpm: tpm-tis-device: set PPI to false by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling g_mapped_file_unref() on a NULL pointer is not valid, and
glib will assert if you try it.
$ qemu-system-arm -M virt -display none -device loader,file=/tmp/bad.elf
qemu-system-arm: -device loader,file=/tmp/bad.elf: GLib: g_mapped_file_unref: assertion 'file != NULL' failed
(One way to produce an ELF file that fails like this is to copy just
the first 16 bytes of a valid ELF file; this is sufficient to fool
the code in load_elf_ram_sym() into thinking it's an ELF file and
calling load_elf32() or load_elf64().)
The failure-exit path in load_elf can be reached from various points
in execution, and for some of those we haven't yet called
g_mapped_file_new_from_fd(). Add a condition to the unref call so we
only call it if we successfully created the GMappedFile to start with.
This will fix the assertion; for the specific case of the generic
loader it will then fall back from "guess this is an ELF file" to
"maybe it's a uImage or a hex file" and eventually to "just load as
a raw data file".
Reported-by: Randy Yates <yates@ieee.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200423202011.32686-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
The array must be terminated by a special element QDEV_CLOCK_END.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This object may be used to represent a clock inside a clock tree.
A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.
Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last
valid CNF register: it's referring to the last byte of the last valid
CNF register.
This hasn't been a problem up to now, as current implementation in
memory.c turns an unaligned 4-byte read from 0x77f to a single byte read
and the qtest only looks at the least-significant byte of the register.
But when running with patches which fix unaligned accesses in memory.c,
the qtest breaks.
Considering NRF51 doesn't support unaligned accesses, the simplest fix
is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid
CNF register: 0x77c.
Now, qtests work with or without the unaligned access patches.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symbol table during kernel loading.
The pointer is ignored, if supplied with flat (non-elf) firmware image.
The Spike board requires it locate the HTIF symbols from firmware ELF
passed via "-bios" option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-2-anup.patel@wdc.com
Message-Id: <20200427080644.168461-2-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.
A new "serial" property is introduced to specify the board serial
number. When not given, the default serial number 1 is used.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com>
[ Changed by AF:
- Use the SoC's serial property to pass the info to the SoC
- Fixup commit title
- Rebase on file restructuring
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.
A new "serial" property is introduced to the sifive_u SoC to specify
the board serial number. When not given, the default serial number
1 is used.
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
linux/kvm.h is not available on all platforms. Let us move
s390_machine_inject_pv_error into pv.c as it uses KVM structures.
Also rename the function to s390_pv_inject_reset_error.
While at it, ipl.h needs an include for "exec/address-spaces.h"
as it uses address_space_memory.
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200406100158.5940-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
SCLP for a protected guest is done over the SIDAD, so we need to use
the s390_cpu_pv_mem_* functions to access the SIDAD instead of guest
memory when reading/writing SCBs.
To not confuse the sclp emulation, we set 0x4000 as the SCCB address,
since the function that injects the sclp external interrupt would
reject a zero sccb address.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200319131921.2367-10-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The unpack facility provides the means to setup a protected guest. A
protected guest cannot be introspected by the hypervisor or any
user/administrator of the machine it is running on.
Protected guests are encrypted at rest and need a special boot
mechanism via diag308 subcode 8 and 10.
Code 8 sets the PV specific IPLB which is retained separately from
those set via code 5.
Code 10 is used to unpack the VM into protected memory, verify its
integrity and start it.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Co-developed-by: Christian Borntraeger <borntraeger@de.ibm.com> [Changes
to machine]
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200323083606.24520-1-frankja@linux.ibm.com>
[CH: fixed up KVM_PV_VM_ -> KVM_PV_]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
spd_data_generate() can pass @errp to error_setg() more than once when
it adjusts both memory size and type. Harmless, because no caller
passes anything that needs adjusting. Until the previous commit,
sam460ex passed types that needed adjusting, but not sizes.
spd_data_generate()'s contract is rather awkward:
If everything's fine, return non-null and don't set an error.
Else, if memory size or type need adjusting, return non-null and
set an error describing the adjustment.
Else, return null and set an error reporting why no data can be
generated.
Its callers treat the error as a warning even when null is returned.
They don't create the "smbus-eeprom" device then. Suspicious.
Since the previous commit, only "everything's fine" can actually
happen. Drop the unused code and simplify the callers. This gets rid
of the error API violation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422134815.1584-3-armbru@redhat.com>
Any sub-page size update to ACPI MRs will be lost during
migration, as we use aligned size in ram_load_precopy() ->
qemu_ram_resize() path. This will result in inconsistency in
FWCfgEntry sizes between source and destination. In order to avoid
this, save and restore them separately during migration.
Up until now, this problem may not be that relevant for x86 as both
ACPI table and Linker MRs gets padded and aligned. Also at present,
qemu_ram_resize() doesn't invoke callback to update FWCfgEntry for
unaligned size changes. But since we are going to fix the
qemu_ram_resize() in the subsequent patch, the issue may become
more serious especially for RSDP MR case.
Moreover, the issue will soon become prominent in arm/virt as well
where the MRs are not padded or aligned at all and eventually have
acpi table changes as part of future additions like NVDIMM hot-add
feature.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200403101827.30664-3-shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's perfectly possible to have no function symbols in your elf file
and if we do the undefined behaviour sanitizer rightly complains about
us passing NULL to qsort. Check nsyms before we go ahead.
While we are at it lets drop the unchecked return value and cleanup
the fail leg by use of g_autoptr.
Another fix was proposed 101 weeks ago in:
Message-Id: 20180421232120.22208-1-f4bug@amsat.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-2-alex.bennee@linaro.org>
Commit e2392d4395 ("ppc/pnv: Create BMC devices at machine init")
introduced default BMC devices which can be a problem when the same
devices are defined on the command line with :
-device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10
QEMU fails with :
qemu-system-ppc64: error creating device tree: node: FDT_ERR_EXISTS
Use defaults_enabled() when creating the default BMC devices to let
the user provide its own BMC devices using '-nodefaults'. If no BMC
device are provided, output a warning but let QEMU run as this is a
supported configuration. However, when multiple BMC devices are
defined, stop QEMU with a clear error as the results are unexpected.
Fixes: e2392d4395 ("ppc/pnv: Create BMC devices at machine init")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200404153655.166834-1-clg@kaod.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
