All targets have been updated. Use the tcg_ops target hook
exclusively, which allows the compat code to be removed.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is is never called with a real range,
only for a single page. Drop the second parameter
and rename to tb_invalidate_phys_page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no users outside of accel/tcg; this function
does not need to be defined in exec-all.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use qatomic_*, which expands to __atomic_* in preference
to the "legacy" __sync_* functions.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change from QEMU_BUILD_BUG_ON, which requires ifdefs to avoid
problematic code, to qemu_build_assert, which can use C ifs.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This differs from assert, in that with optimization enabled it
triggers at build-time. It differs from QEMU_BUILD_BUG_ON,
aka _Static_assert, in that it is sensitive to control flow
and is subject to dead-code elimination.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we're writing the NULL section header if we overflow the
physical header number in the ELF header. But in the future we'll add
custom section headers AND section data.
To facilitate this we need to rearange section handling a bit. As with
the other ELF headers we split the code into a prepare and a write
step.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-2-frankja@linux.ibm.com>
Store a reference on the AspeedSMC class under the flash object and
use it when accessing the flash contents. Avoiding the class cast
checkers in these hot paths improves performance by 10% when running
the aspeed avocado tests.
Message-Id: <20220923084803.498337-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Investigating why some BMC models are so slow compared to a plain ARM
virt machines I did some profiling of:
./qemu-system-arm -M romulus-bmc -nic user \
-drive
file=obmc-phosphor-image-romulus.static.mtd,format=raw,if=mtd \
-nographic -serial mon:stdio
And saw that object_class_dynamic_cast_assert was dominating the
profile times. We have a number of cases in this model of the SSI bus.
As the class is static once the object is created we just cache it and
use it instead of the dynamic case macros.
Profiling against:
./tests/venv/bin/avocado run \
tests/avocado/machine_aspeed.py:test_arm_ast2500_romulus_openbmc_v2_9_0
Before: 35.565 s ± 0.087 s
After: 15.713 s ± 0.287 s
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220811151413.3350684-6-alex.bennee@linaro.org>
Message-Id: <20220923084803.498337-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I think when Klaus ported his slave mode changes from the original patch
series to the rewritten I2C module, he changed the behavior of the first
byte that is received by the slave device.
What's supposed to happen is that the AspeedI2CBus's slave device's
i2c_event callback should run, and if the event is "send_async", then it
should populate the byte buffer with the 8-bit I2C address that is being
sent to. Since we only support "send_async", the lowest bit should
always be 0 (indicating that the master is requesting to send data).
This is the code Klaus had previously, for reference. [1]
switch (event) {
case I2C_START_SEND:
bus->buf = bus->dev_addr << 1;
bus->buf &= I2CD_BYTE_BUF_RX_MASK;
bus->buf <<= I2CD_BYTE_BUF_RX_SHIFT;
bus->intr_status |= (I2CD_INTR_SLAVE_ADDR_RX_MATCH | I2CD_INTR_RX_DONE);
aspeed_i2c_set_state(bus, I2CD_STXD);
break;
[1]: https://lore.kernel.org/qemu-devel/20220331165737.1073520-4-its@irrelevant.dk/
Fixes: a8d48f59cd ("hw/i2c/aspeed: add slave device in old register mode")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220820225712.713209-2-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
Change the ppc440_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr2. This is mostly
modelling the DDR2 SDRAM controller found in the 460EX (used on the
sam460ex board). Newer SoCs (regardless of their PPC core, e.g. 405EX)
may have this controller but we only emulate enough of it for the
sam460ex u-boot firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <3e82ae575c7c41e464a0082d55ecb4ebcc4d4329.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change the ppc4xx_sdram model to a QOM class derived from the
PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly
modelling the DDR SDRAM controller found in the 440EP (used on the
bamboo board) but also backward compatible with the older DDR
controllers on some 405 SoCs so we also use it for those now. This
likely does not cause problems for guests we run as the new features
are just not accessed but to model 405 SoC accurately some features
may have to be disabled or the model split between 440 and older.
Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an
updated DDR2 SDRAM controller implemented by the ppc440_sdram model
(only partially, enough for the 460EX on the sam460ex) that is not yet
QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2
when QOM'ified later.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The do_init parameter of ppc4xx_sdram_init() is used to map memory
regions that is normally done by the firmware by programming the SDRAM
controller. Do this from board code emulating what firmware would do
when booting a kernel directly from -kernel without a firmware so we
can get rid of this do_init hack.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Section 5.6.6.3 of VirtIO specification states, "Events will also
be reported via sense codes..." However, no sense data is sent when
VIRTIO_SCSI_EVT_RESET_RESCAN or VIRTIO_SCSI_EVT_RESET_REMOVED events
are reported (when disk hotplug/hotunplug events occur). SCSI layer
on Solaris depends on this sense data, and hence does not handle disk
hotplug/hotunplug events.
When the disk inventory changes, use the bus unit attention mechanism
to return a CHECK_CONDITION status with sense data of 0x06/0x3F/0x0E
(sense code REPORTED_LUNS_CHANGED). The first device on the bus to
execute a command successfully will report and consume the unit
attention status.
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <20221006194946.24134-1-venu.busireddy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block layer patches
- job: replace AioContext lock with job_mutex
- Fixes to make coroutine_fn annotations more accurate
- QAPI schema: Fix incorrect example
- Code cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmNAAz8RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9a6zg//QYLx+FYMStb50lS+6VBio8AKOVbwn5zp
# ZANoXinMknnxI5wTldjkkM1cBRg27BVjpOHz4XemBtQgT5nBqWq8+Ov31lwASVID
# na/L9o4Pa0xmywM777K+edceWk0fpJTLmnFf1Qxan9qB/VSjNFtk+fjwFopoatKg
# XbHd6maQtrY8bIOyBsBoZozNaS39E/uPqkP67V6GF09re17f0PBctGHKFkTKZr8w
# 2HfyMt8/UIhFet++NFgxppTcvIKfZ20pk4AQ+yYsL+FxWr/cs4leKWl5BSc7thtP
# Sm/y0WiEB4nPNo4CSf9sA1Vo8EIGYzBhUVteqYQUF2vSXSzFmZb191fLJRYwp5bQ
# QxEmHzPVGqcUHr+jkfXI0yLolWduiKV1ATZ0zW3N41VfzGLYZdSgI2ZhbHJ0/yKO
# ZhyC63gye9V6TXxviYIz2V6iOD8QuwJ8X1P0E3yRsGploF1UY/N1lwbmek1XhFn/
# +xn/mrTeV0lu4wKuWRpUfY2C/7SR0Za6MB2GqduRWnbcAonLH3/syAxXSfu2611N
# Z1Cf9Wu8Mm0IQz0LbbVvEJZ4yoEPkg/tGH8q6dpau2uTfCb6sSylRxLcXEa5R0UQ
# W+wX5GSoTDe4DQKOSaJE7jWV/QwY5diTLHBIvSF8uKAfeCenkDDLowrMvbWafL0X
# XTFzpZ/1aA8=
# =jMFT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Oct 2022 06:45:19 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of git://repo.or.cz/qemu/kevin: (50 commits)
file-posix: Remove unused s->discard_zeroes
job: remove unused functions
blockjob: remove unused functions
block_job_query: remove atomic read
job.c: enable job lock/unlock and remove Aiocontext locks
job.h: categorize JobDriver callbacks that need the AioContext lock
blockjob: protect iostatus field in BlockJob struct
blockjob: rename notifier callbacks as _locked
blockjob.h: categorize fields in struct BlockJob
jobs: protect job.aio_context with BQL and job_mutex
job: detect change of aiocontext within job coroutine
jobs: group together API calls under the same job lock
block/mirror.c: use of job helpers in drivers
jobs: use job locks also in the unit tests
jobs: add job lock in find_* functions
blockjob: introduce block_job _locked() APIs
job: move and update comments from blockjob.c
job.c: add job_lock/unlock while keeping job.h intact
aio-wait.h: introduce AIO_WAIT_WHILE_UNLOCKED
job.c: API functions not used outside should be static
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.
Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>
Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.
As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>
