Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
MIPS boards may only be available for big-endian or only for
little-endian emulators, add a symbol so that this can be described
with a "depends on" clause.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets use "default y" for boards to filter out those that require
TCG. For consistency we are switching all other targets to do the same.
Continue with i386.
No changes to generated config-devices.mak files, other than
adding CONFIG_I386 to the x86_64-softmmu target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target/ppc/kvm.c calls out to code in hw/ppc/spapr*.c; that code is
not present and fails to link if CONFIG_PSERIES is not enabled.
Adjust kvm.c to depend on CONFIG_PSERIES instead of TARGET_PPC64,
and compile out anything that requires cap_papr, because only
the pseries machine will call kvmppc_set_papr().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM code might have to call functions on the PCIDevice that is
passed to kvm_arch_fixup_msi_route(). This fails in the case
where --without-default-devices is used and no board is
configured. While this is not really a useful configuration,
and therefore setting up stubs for CONFIG_PCI is overkill,
failing the build is impolite. Just include the PCI
subsystem if kvm_arch_fixup_msi_route() requires it, as
is the case for ARM and x86.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulated with QEMU, interrupts will never come in the following
loop. However, if the NOP instruction is uncommented, interrupts will
fire as normal.
loop:
cli
call do_sti
jmp loop
do_sti:
sti
# nop
ret
This behavior is different from that of a real processor. For example,
if KVM is enabled, interrupts will always fire regardless of whether the
NOP instruction is commented or not. Also, the Intel Software Developer
Manual states that after the STI instruction is executed, the interrupt
inhibit should end as soon as the next instruction (e.g., the RET
instruction if the NOP instruction is commented) is executed.
This problem is caused because the previous code may choose not to end
the TB even if the HF_INHIBIT_IRQ_MASK has just been reset (e.g., in the
case where the STI instruction is immediately followed by the RET
instruction), so that IRQs may not have a change to trigger. This commit
fixes the problem by always terminating the current TB to give IRQs a
chance to trigger when HF_INHIBIT_IRQ_MASK is reset.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Message-ID: <20240415064518.4951-4-lrh2000@pku.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Clean-ups for "errp" handling in s390x cpu_model code
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYwmaMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUCERAAss5PJMG8rI4i4X/3nW49JYTlPOpgm/YX
# /UWF+eHUlqaqDdE0s+Pdw4Ozo3hXQt/E/CkcyflUTzVpnZtpv9vkhNWyjOoPV31v
# GQyQEzGvxZXl2S595XefyAyaMTP5maBhUTlyZWJo385cQraa60Ot5d4Mibr2CobY
# gIBRxEGB/frJYpbHJPxd/FxJV120gtuWAdZwGGYYYjwMzf2IKu2veODB8CnUErlX
# WNUsIzjtAslfh8Ek2ZmPzD7uktCUeigkukqIrLC1oEU3wzbJHkISv1kXCKPW/Nf6
# ISjVa5TqGwkiiF8fw9aYKvWrnPJS7JkhXw7Gz+b39d846kUdNyDfgLcYJeNS3cZ2
# R1xgR9B6hX8ZmikMbGC+0/Sv15u2Yr+bFxJBTJzq6zdOAb9EJNQY1hW2w/Lbrg3X
# LjY+ltcVweoSILT6AE6vGDPCHfBzO+6FcptFvw7ePvRGOlwAPZ3tEB9G2LEbCYgg
# BjWNP4aRuSfbUebO4x4Todz65WN8aY1EIBXORU/wgUlF2+zajWiOI5JRDKjWz2qQ
# gAMeCbLplli5bYrChWtouRIXtb061cQloULddu/SRFcaJOlV3SCzx4JfN15pU90s
# jRMIhMESAEj4NSfclhxsOiYp3ywZTvlQsVA6MgPlu2i3HJakQnt5zbg59TesRn2d
# r5PfAk83UnA=
# =0OB7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Apr 2024 12:11:31 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/cirrus: Remove the netbsd and openbsd jobs
.gitlab-ci.d/cirrus.yml: Shorten the runtime of the macOS and FreeBSD jobs
tests/qtest/ide-test: Verify READ NATIVE MAX ADDRESS is not limited
hw/ide/core.c (cmd_read_native_max): Avoid limited device parameters
gitlab: remove stale s390x-all-linux-static conf hacks
gitlab: migrate the s390x custom machine to 22.04
build-environment: make some packages optional
hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
qga: Re-enable the qga-ssh-test when running without fuzzing
stubs: Add missing qga stubs
hw: misc: edu: use qemu_log_mask instead of hw_error
hw: misc: edu: rename local vars in edu_check_range
hw: misc: edu: fix 2 off-by-one errors
target/s390x/cpu_models_sysemu: Drop local @err in apply_cpu_model()
target/s390x/cpu_models: Make kvm_s390_apply_cpu_model() return boolean
target/s390x/cpu_models: Drop local @err in get_max_cpu_model()
target/s390x/cpu_models: Make kvm_s390_get_host_cpu_model() return boolean
target/s390x/cpu_model: Drop local @err in s390_realize_cpu_model()
target/s390x/cpu_model: Make check_compatibility() return boolean
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In previous versions of the Arm architecture, the frequency of the
generic timers as reported in CNTFRQ_EL0 could be any IMPDEF value,
and for QEMU we picked 62.5MHz, giving a timer tick period of 16ns.
In Armv8.6, the architecture standardized this frequency to 1GHz.
Because there is no ID register feature field that indicates whether
a CPU is v8.6 or that it ought to have this counter frequency, we
implement this by changing our default CNTFRQ value for all CPUs,
with exceptions for backwards compatibility:
* CPU types which we already implement will retain the old
default value. None of these are v8.6 CPUs, so this is
architecturally OK.
* CPUs used in versioned machine types with a version of 9.0
or earlier will retain the old default value.
The upshot is that the only CPU type that changes is 'max'; but any
new type we add in future (whether v8.6 or not) will also get the new
1GHz default.
It remains the case that the machine model can override the default
value via the 'cntfrq' QOM property (regardless of the CPU type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-5-peter.maydell@linaro.org
The generic timer frequency is settable by board code via a QOM
property "cntfrq", but otherwise defaults to 62.5MHz. The way this
is done includes some complication resulting from how this was
originally a fixed value with no QOM property. Clean it up:
* always set cpu->gt_cntfrq_hz to some sensible value, whether
the CPU has the generic timer or not, and whether it's system
or user-only emulation
* this means we can always use gt_cntfrq_hz, and never need
the old GTIMER_SCALE define
* set the default value in exactly one place, in the realize fn
The aim here is to pave the way for handling the ARMv8.6 requirement
that the generic timer frequency is always 1GHz. We're going to do
that by having old CPU types keep their legacy-in-QEMU behaviour and
having the default for any new CPU types be a 1GHz rather han 62.5MHz
cntfrq, so we want the point where the default is decided to be in
one place, and in code, not in a DEFINE_PROP_UINT64() initializer.
This commit should have no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240426122913.3427983-2-peter.maydell@linaro.org
FEAT_Spec_FPACC is a feature describing speculative behaviour in the
event of a PAC authontication failure when FEAT_FPACCOMBINE is
implemented. FEAT_Spec_FPACC means that the speculative use of
pointers processed by a PAC Authentication is not materially
different in terms of the impact on cached microarchitectural state
(caches, TLBs, etc) between passing and failing of the PAC
Authentication.
QEMU doesn't do speculative execution, so we can advertise
this feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-6-peter.maydell@linaro.org
Newer versions of the Arm ARM (e.g. rev K.a) now define fields for
ID_AA64MMFR3_EL1. Implement this register, so that we can set the
fields if we need to. There's no behaviour change here since we
don't currently set the register value to non-zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-5-peter.maydell@linaro.org
FEAT_ETS2 is a tighter set of guarantees about memory ordering
involving translation table walks than the old FEAT_ETS; FEAT_ETS has
been retired from the Arm ARM and the old ID_AA64MMFR1.ETS == 1
now gives no greater guarantees than ETS == 0.
FEAT_ETS2 requires:
* the virtual address of a load or store that appears in program
order after a DSB cannot be translated until after the DSB
completes (section B2.10.9)
* TLB maintenance operations that only affect translations without
execute permission are guaranteed complete after a DSB
(R_BLDZX)
* if a memory access RW2 is ordered-before memory access RW2,
then RW1 is also ordered-before any translation table walk
generated by RW2 that generates a Translation, Address size
or Access flag fault (R_NNFPF, I_CLGHP)
As with FEAT_ETS, QEMU is already compliant, because we do not
reorder translation table walk memory accesses relative to other
memory accesses, and we always guarantee to have finished TLB
maintenance as soon as the TLB op is done.
Update the documentation to list FEAT_ETS2 instead of the
no-longer-existent FEAT_ETS, and update the 'max' CPU ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-4-peter.maydell@linaro.org
FEAT_CSV2_3 adds a mechanism to identify if hardware cannot disclose
information about whether branch targets and branch history trained
in one hardware described context can control speculative execution
in a different hardware context.
There is no branch prediction in TCG, so we don't need to do anything
to be compliant with this. Upadte the '-cpu max' ID registers to
advertise the feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-3-peter.maydell@linaro.org
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_apply_cpu_model() return boolean and check the
returned boolean in apply_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
So make kvm_s390_get_host_cpu_model() return boolean and check the
returned boolean in get_max_cpu_model() instead of accessing @err.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240425031232.1586401-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit d424db2354 excluded some strerrorname_np() instances because they
break musl libc builds. Another instance happened to slip by via commit
d4ff3da8f4.
Remove it before it causes trouble again.
Fixes: d4ff3da8f4 (target/riscv/kvm: initialize 'vlenb' via get-reg-list)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 1590154ee4 ("target/loongarch: Fix qemu-system-loongarch64 assert failed with the option '-d int'")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Printing a "PowerPC" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now and use two spaces at the
beginning of the lines for the indentation of the entries instead,
and add a "Available CPUs" in the very first line, like most other
target architectures are doing it for their CPU help output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Printing an "s390x" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now!
While we're at it, use two spaces at the beginning of the lines for
the indentation of the entries, and add a "Available CPUs" in the
very first line, like most other target architectures are doing it
for their "-cpu help" output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Printing an "x86" in front of each CPU name is not helpful at all:
It is confusing for the users since they don't know whether they
have to specify these letters for the "-cpu" parameter, too, and
it also takes some precious space in the dense output of the CPU
entries. Let's simply remove this now and use two spaces at the
beginning of the lines for the indentation of the entries instead,
like most other target architectures are doing it for their CPU help
output already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The CPUBreakpoint and CPUWatchpoint structures are declared
in "hw/core/cpu.h", which contains declarations related to
CPUState and CPUClass. Some source files only require the
BP/WP definitions and don't need to pull in all CPU* API.
In order to simplify, create a new "exec/breakpoint.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-3-philmd@linaro.org>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
NVMM has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-3-philmd@linaro.org>
WHPX has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-2-philmd@linaro.org>
accel/tcg/ files requires the following definitions:
- TARGET_LONG_BITS
- TARGET_PAGE_BITS
- TARGET_PHYS_ADDR_SPACE_BITS
- TCG_GUEST_DEFAULT_MO
The first 3 are defined in "cpu-param.h". The last one
in "cpu.h", with a bunch of definitions irrelevant for
TCG. By moving the TCG_GUEST_DEFAULT_MO definition to
"cpu-param.h", we can simplify various accel/tcg includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20231211212003.21686-4-philmd@linaro.org>
'NEED_CPU_H' guard target-specific code; it is defined by meson
altogether with the 'CONFIG_TARGET' definition. Rename NEED_CPU_H
as COMPILING_PER_TARGET to clarify its meaning.
Mechanical change running:
$ sed -i s/NEED_CPU_H/COMPILING_PER_TARGET/g $(git grep -l NEED_CPU_H)
then manually add a /* COMPILING_PER_TARGET */ comment
after the '#endif' when the block is large.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240322161439.6448-4-philmd@linaro.org>
Misc HW patch queue
- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
- Various cleanups (Thomas, Zhao, Inès, Bernhard)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t
# wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B
# uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn
# zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA
# MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i
# Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/
# aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp
# l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2
# zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp
# gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY
# SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95
# 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0=
# =tm+U
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits)
hw/core: Support module-id in numa configuration
hw/core: Introduce module-id as the topology subindex
hw/core/machine: Support modules in -smp
hw/core/machine: Introduce the module as a CPU topology level
hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init()
hw/misc : Correct 5 spaces indents in stm32l4x5_exti
hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h'
hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc
hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean
hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean
hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean
hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device
hw: Fix problem with the A*MPCORE switches in the Kconfig files
hw/riscv/virt: Replace sprintf by g_strdup_printf
hw/misc/imx: Replace sprintf() by snprintf()
hw/misc/applesmc: Simplify DeviceReset handler
target/i386: Move APIC related code to cpu-apic.c
hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h
scripts: add script to compare compatibility properties
python/qemu/machine: add method to retrieve QEMUMachine::binary field
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so the NMI exception trap entry
behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the
GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority)
come from the hcrx_el2.HCRX_VFNMI bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
