Next patches enable devices to be migrated even if vdpa netdev has not
been started with x-svq. However, not all devices are migratable, so we
need to block migration if we detect that.
Block migration if we detect the device expose a feature SVQ does not
know how to work with.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A vdpa net device must initialize with SVQ in order to be migratable at
this moment, and initialization code verifies some conditions. If the
device is not initialized with the x-svq parameter, it will not expose
_F_LOG so the vhost subsystem will block VM migration from its
initialization.
Next patches change this, so we need to verify migration conditions
differently.
QEMU only supports a subset of net features in SVQ, and it cannot
migrate state that cannot track or restore in the destination. Add a
migration blocker if the device offers an unsupported feature.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although it does not make a big difference, its more correct and
simplifies the cleanup path in subsequent patches.
Move ram_block_discard_disable(false) call to the top of
vhost_vdpa_cleanup because:
* We cannot use vhost_vdpa_first_dev after dev->opaque = NULL
assignment.
* Improve the stack order in cleanup: since it is the last action taken
in init, it should be the first at cleanup.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows net to restart the device backend to configure SVQ on it.
Ideally, these changes should not be net specific and they could be done
in:
* vhost_vdpa_set_features (with VHOST_F_LOG_ALL)
* vhost_vdpa_set_vring_addr (with .enable_log)
* vhost_vdpa_set_log_base.
However, the vdpa net backend is the one with enough knowledge to
configure everything because of some reasons:
* Queues might need to be shadowed or not depending on its kind (control
vs data).
* Queues need to share the same map translations (iova tree).
Also, there are other problems that may have solutions but complicates
the implementation at this stage:
* We're basically duplicating vhost_dev_start and vhost_dev_stop, and
they could go out of sync. If we want to reuse them, we need a way to
skip some function calls to avoid recursiveness (either vhost_ops ->
vhost_set_features, vhost_set_vring_addr, ...).
* We need to traverse all vhost_dev of a given net device twice: one to
stop and get the vq state and another one after the reset to
configure properties like address, fd, etc.
Because of that it is cleaner to restart the whole net backend and
configure again as expected, similar to how vhost-kernel moves between
userspace and passthrough.
If more kinds of devices need dynamic switching to SVQ we can:
* Create a callback struct like VhostOps and move most of the code
there. VhostOps cannot be reused since all vdpa backend share them,
and to personalize just for networking would be too heavy.
* Add a parent struct or link all the vhost_vdpa or vhost_dev structs so
we can traverse them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop calls vhost operation
vhost_dev_start(false). In the case of vdpa it totally reset and wipes
the device, making the fetching of the vring base (virtqueue state) totally
useless.
The kernel backend does not use vhost_dev_start vhost op callback, but
vhost-user do. A patch to make vhost_user_dev_start more similar to vdpa
is desirable, but it can be added on top.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop fetches the vring base so the vq
state can be migrated to other devices. However, this is unreliable in
vdpa, since we didn't signal the device to suspend the queues, making
the value fetched useless.
Suspend the device if possible before fetching first and subsequent
vring bases.
Moreover, vdpa totally reset and wipes the device at the last device
before fetch its vrings base, making that operation useless in the last
device. This will be fixed in later patches of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows vhost_vdpa to track if it is safe to get the vring base from
the device or not. If it is not, vhost can fall back to fetch idx from
the guest buffer again.
No functional change intended in this patch, later patches will use this
field.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this moment it is only possible to migrate to a vdpa device running
with x-svq=on. As a protective measure, the rewind of the inflight
descriptors was done at the destination. That way if the source sent a
virtqueue with inuse descriptors they are always discarded.
Since this series allows to migrate also to passthrough devices with no
SVQ, the right thing to do is to rewind at the source so the base of
vrings are correct.
Support for inflight descriptors may be added in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can use "query-stats" QMP command to query statistics of
crypto devices. (Originally this was designed to show statistics
by '{"execute": "query-cryptodev"}'. Daniel Berrangé suggested that
querying configuration info by "query-cryptodev", and querying
runtime performance info by "query-stats". This makes sense!)
Example:
~# virsh qemu-monitor-command vm '{"execute": "query-stats", \
"arguments": {"target": "cryptodev"} }' | jq
{
"return": [
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 7680
},
...
{
"name": "asym-decrypt-ops",
"value": 32
},
{
"name": "asym-encrypt-ops",
"value": 48
}
],
"qom-path": "/objects/cryptodev0" # support asym only
},
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 0
},
...
{
"name": "sym-decrypt-bytes",
"value": 5376
},
...
],
"qom-path": "/objects/cryptodev1" # support asym/sym
}
],
"id": "libvirt-422"
}
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-12-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add 'throttle-bps' and 'throttle-ops' limitation to set QoS. The
two arguments work with both QEMU command line and QMP command.
Example of QEMU command line:
-object cryptodev-backend-builtin,id=cryptodev1,throttle-bps=1600,\
throttle-ops=100
Example of QMP command:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 100
or cancel limitation:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 0
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-11-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Account OPS/BPS for crypto device, this will be used for 'query-stats'
QEMU monitor command and QoS in the next step.
Note that a crypto device may support symmetric mode, asymmetric mode,
both symmetric and asymmetric mode. So we use two structure to
describe the statistics of a crypto device.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-10-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move queue_index, CryptoDevCompletionFunc and opaque into struct
CryptoDevBackendOpInfo, then cryptodev_backend_crypto_operation()
needs an argument CryptoDevBackendOpInfo *op_info only. And remove
VirtIOCryptoReq from cryptodev. It's also possible to hide
VirtIOCryptoReq into virtio-crypto.c in the next step. (In theory,
VirtIOCryptoReq is a private structure used by virtio-crypto only)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-9-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev alg type in cryptodev.json, then apply this to
related codes, and drop 'enum CryptoDevBackendAlgType'.
There are two options:
1, { 'enum': 'QCryptodevBackendAlgType',
'prefix': 'CRYPTODEV_BACKEND_ALG',
'data': ['sym', 'asym']}
Then we can keep 'CRYPTODEV_BACKEND_ALG_SYM' and avoid lots of
changes.
2, changes in this patch(with prefix 'QCRYPTODEV_BACKEND_ALG').
To avoid breaking the rule of QAPI, use 2 here.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-4-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have already used qapi to generate crypto device types, this allows
to convert type to a string 'model', so the 'model' field is not
needed.
And the 'name' field is not used by any backend driver, drop it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-3-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce QCryptodevBackendType in cryptodev.json, also apply this to
related codes. Then we can drop 'enum CryptoDevBackendOptionsType'.
Note that `CRYPTODEV_BACKEND_TYPE_NONE` is *NOT* used by anywhere, so
drop it(no 'none' enum in QCryptodevBackendType).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
microMIPS J & JAL instructions perform a jump in a 128MB region and 5
top bits of the address need to be preserved. This is different behavior
compared to standard mips systems, where the jump is executed within a
256MB region.
Note that microMIPS32 instruction set documentation appears to have
inconsistent information regarding JALX32 instruction - it is written in
the doc that:
"To execute a procedure call within the current 256 MB-aligned region
(...)
The low 26 bits of the target address is the target field shifted left
2 bits."
But the target address is already 26 bits. Moreover, the operation
description indicates that 28 bits are copied, so the statement about
use of 26 bits is _most likely_ incorrect and the corresponding code
remains the same as for standard mips instruction set.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216051717.3911212-2-marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to avoid warnings such commit c0a6665c3c ("target/i386:
Remove compilation errors when -Werror=maybe-uninitialized"),
replace all assert(0) and g_assert(0) by g_assert_not_reached().
Remove any code following g_assert_not_reached().
See previous commit for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-4-philmd@linaro.org>
Now that all the work is done to enable the PV backends to work without
actual Xen, instantiate the bus from pc_basic_device_init() for emulated
mode.
This allows us finally to launch an emulated Xen guest with PV disk.
qemu-system-x86_64 -serial mon:stdio -M q35 -cpu host -display none \
-m 1G -smp 2 -accel kvm,xen-version=0x4000a,kernel-irqchip=split \
-kernel bzImage -append "console=ttyS0 root=/dev/xvda1" \
-drive file=/var/lib/libvirt/images/fedora28.qcow2,if=none,id=disk \
-device xen-disk,drive=disk,vdev=xvda
If we use -M pc instead of q35, we can even add an IDE disk and boot a
guest image normally through grub. But q35 gives us AHCI and that isn't
unplugged by the Xen magic, so the guests ends up seeing "both" disks.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is only part of it; we will also need to get the PV back end drivers
to tear down their own mappings (or do it for them, but they kind of need
to stop using the pointers too).
Some more work on the actual PV back ends and xen-bus code is going to be
needed to really make soft reset and migration fully functional, and this
part is the basis for that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
We don't actually access the guest's page through the grant, because
this isn't real Xen, and we can just use the page we gave it in the
first place. Map the grant anyway, mostly for cosmetic purposes so it
*looks* like it's in use in the guest-visible grant table.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Now that we have an internal implementation of XenStore, we can populate
the xenstore_backend_ops to allow PV backends to talk to it.
Watches can't be processed with immediate callbacks because that would
call back into XenBus code recursively. Defer them to a QEMUBH to be run
as appropriate from the main loop. We use a QEMUBH per XS handle, and it
walks all the watches (there shouldn't be many per handle) to fire any
which have pending events. We *could* have done it differently but this
allows us to use the same struct watch_event as we have for the guest
side, and keeps things relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is limited to mapping a single grant at a time, because under Xen the
pages are mapped *contiguously* into qemu's address space, and that's very
hard to do when those pages actually come from anonymous mappings in qemu
in the first place.
Eventually perhaps we can look at using shared mappings of actual objects
for system RAM, and then we can make new mappings of the same backing
store (be it deleted files, shmem, whatever). But for now let's stick to
a page at a time.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
