The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.
Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.
I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.
If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.
For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.
Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.
So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Block patches
# gpg: Signature made Mon 10 Nov 2014 09:42:07 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
block/vdi: Limit maximum size even futher
qapi: Complete BlkdebugEvent
iotests: Add test for non-existing backing file
block: Propagate error in bdrv_img_create()
qemu-img: Omit error_report() after img_open()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several bugfixes for s390x:
- instruction decoding and sparse warning in kvm
- overlong input and hangs in the sclp consoles
# gpg: Signature made Wed 05 Nov 2014 15:42:14 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20141105:
s390x/sclpconsole: Avoid hanging SCLP ASCII console
s390x/sclpconsole-lm: Fix hanging SCLP line mode console
s390x/sclpconsole-lm: truncate input if line is too long
s390x/kvm: Fix warning from sparse
s390x/kvm: Fix opcode decoding for eb instruction handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/lalrae/tags/mips-20141107:
target-mips: fix multiple TCG registers covering same data
mips: Ensure PC update with MTC0 single-stepping
target-mips: fix for missing delay slot in BC1EQZ and BC1NEZ
mips: Set the CP0.Config3.DSP and CP0.Config3.DSP2P bits
mips: Add macros for CP0.Config3 and CP0.Config4 bits
mips: Respect CP0.Status.CU1 for microMIPS FP branches
mips: Remove CONFIG_VT82C686 from non-Fulong configs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes a crash when a virtio-serial port is added without a name to it.
# gpg: Signature made Fri 07 Nov 2014 04:58:05 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit/tags/vser-2.2.0-queue-2:
virtio-serial: avoid crash when port has no name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Avoid to allocate different TCG registers for the FPU registers
that are mapped on the MSA vectore registers.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Correct the way PC is updated when single-stepping instructions, by
keeping the old PC only for the BS_EXCP (exception condition) state.
Some MTC0 (and possibly other) instructions switch to the BS_STOP state
to terminate the current translation block, so that the state transition
of the simulated CPU resulting from the CP0 operation takes effect with
the following instruction. This happens with `mtc0 <reg>,c0_config' for
example, typically used to set KSEG0 cacheability.
While single-stepping this has a side-effect of not advancing the PC
past the instruction just executed; subsequent single-step traps will
stop at the same instruction repeatedly. Example:
(gdb) stepi
0x80004d24 in _start ()
5: x/i $pc
=> 0x80004d24 <_start+364>: mfc0 t1,c0_config
(gdb)
0x80004d28 in _start ()
5: x/i $pc
=> 0x80004d28 <_start+368>: li at,-8
(gdb)
0x80004d2c in _start ()
5: x/i $pc
=> 0x80004d2c <_start+372>: and t1,t1,at
(gdb)
0x80004d30 in _start ()
5: x/i $pc
=> 0x80004d30 <_start+376>: ori t1,t1,0x3
(gdb)
0x80004d34 in _start ()
5: x/i $pc
=> 0x80004d34 <_start+380>: mtc0 t1,c0_config
(gdb)
0x80004d34 in _start ()
5: x/i $pc
=> 0x80004d34 <_start+380>: mtc0 t1,c0_config
(gdb)
0x80004d34 in _start ()
5: x/i $pc
=> 0x80004d34 <_start+380>: mtc0 t1,c0_config
(gdb)
0x80004d34 in _start ()
5: x/i $pc
=> 0x80004d34 <_start+380>: mtc0 t1,c0_config
(gdb)
-- oops!
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
New R6 COP1 conditional branches currently don't have delay slot. Fixing this
by setting MIPS_HFLAG_BDS32 flag which is required for branches having 4-byte
delay slot.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Set the CP0.Config3.DSP2P bit for the 74kf processor and both that bit
and the CP0.Config3.DSP bit for the artificial mips32r5-generic and
mips64dspr2 processors. They have the DSPr2 ASE enabled in `insn_flags'
and CPUs that implement that ASE need to have both CP0.Config3.DSP and
CP0.Config3.DSP2P set or software won't detect its presence.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
[leon.alrae@imgtec.com: remove DSP flags from mips32r5-generic]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Define macros for CP0.Config3 and CP0.Config4 bits. These used to be
exhaustive as at MIPS32r3, but more bits may have been added since.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Make microMIPS FP branches respect CP0.Status.CU1 and trap with a
Coprocessor Unusable exception if COP1 has been disabled; also trap if
no FPU is present at all.
Standard MIPS FP instruction encodings have a more regular structure and
branches are covered with a single umbrella along other instructions.
This is not the case with the microMIPS encoding, this case has to be
taken care of explicitly here. Code to do so has been copied from the
standard MIPS code handler for OPC_CP1, in `decode_opc'.
Problems arising from this bug will generally only show up on user
context switches in operating systems making use of lazy FP context
switches, such as Linux. It will also more readily trigger if software
FPU emulation is used, either implicitly on a non-float CPU, or forced
on a hard-float CPU such as with the "nofpu" Linux kernel command line
argument.
The problem may have been easily missed because we have no hard-float
microMIPS CPU configuration present; in fact we have no microMIPS CPU
configuration of any kind present.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Fix the regression introduced with commit
47934d0aad [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS. Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
It seems "name" is not mandatory, and the following command line (based
on one generated by current libvirt) will crash qemu at start:
qemu-system-x86_64 \
-device virtio-serial-pci \
-device virtserialport,name=foo \
-device virtconsole
Program received signal SIGSEGV, Segmentation fault.
__strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
210 movlpd (%rsi), %xmm2
Missing separate debuginfos, use: debuginfo-install
python-libs-2.7.5-13.fc20.x86_64
(gdb) bt
#0 __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
#1 0x000055555566bdc6 in find_port_by_name (name=0x0) at /home/elmarco/src/qemu/hw/char/virtio-serial-bus.c:67
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Test the error message when a COW file is about to be created which is
supposed to inherit the size of its backing file, while the backing file
given does not actually exist.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the specified backing file could not be opened, do not generate a new
error message which contains the message which has been generated by
bdrv_open(), but just propagate the latter.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
img_open() already prints an error if the operation failed, so there
should not be another error_report() afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Force recalculation of file descriptor sets for main loop's poll(),
in order to be able to readd a possibly removed input file descriptor
after can_read() returned 0 (zero).
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Trigger recalculating sets of file descriptors for the main loop's poll()
in order to make sure a possibly removed FD 0 from the poll() file
descriptor array is re-added. FD 0 is removed from the decriptor array
when the console's can_read() callback returns 0.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As the SCLP line mode console input length is limited by the available
SCCB buffer space, it might lock up if the input does not fit into the
buffer.
With this patch, characters that don't fit are 'eaten' up to the next
CR/LF and the input line is sent truncated to the guest.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When running "sparse" with the s390x kvm.c code, it complains that
"constant 0x00400f1d40330000 is so big it is long" - let's fix this
by appending a proper suffix.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Patch queue for s390 - 2014-11-05
Two simple bug fixes to enable slightly newer guest kernels
and preliminary -M s390-ccw support for TCG (virtio doesn't work yet!)
# gpg: Signature made Wed 05 Nov 2014 11:01:55 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-s390-for-upstream:
s390x: Implement SAM{24,31,64}
s390x: Fix sclp console input
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After commit 89b516d8, some logics is turbid and
breaks 'make check' as below errors:
tests/vhost-user-test.c: In function '_cond_wait_until':
tests/vhost-user-test.c:154: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
tests/vhost-user-test.c:154: error: (Each undeclared identifier is reported only once
tests/vhost-user-test.c:154: error: for each function it appears in.)
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:192: warning: implicit declaration of function 'g_get_monotonic_time'
tests/vhost-user-test.c:192: warning: nested extern declaration of 'g_get_monotonic_time'
tests/vhost-user-test.c:192: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
make: *** [tests/vhost-user-test.o] Error 1
First, vhost-usr-test.c rely on glib-compat.h because
of using G_TIME_SPAN_SECOND [glib < 2.26] and g_get_monotonic_time(),
but vhost-usr-test.c defined QEMU_GLIB_COMPAT_H, which make
glib-compat.h will not be included.
Second, if we remove QEMU_GLIB_COMPAT_H definability in
vhost-usr-test.c, then we will get below warnings:
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:190: warning: passing argument 1 of 'g_mutex_lock' from incompatible pointer type
tests/vhost-user-test.c:234: warning: passing argument 1 of 'g_mutex_unlock' from incompatible pointer type
That's because glib-compat.h redefine the g_mutex_lock/unlock
function. Those functions' arguments is CompatGMutex/CompatGCond,
but vhost-user-test.c is using GMutex/GCond, which cause the type
is not consistent.
We can rerealize those functions of vhost-user-test.c,
which need a lots of patches. Let's simply address it, and
leave this file alone.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1415149259-6188-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SAM instructions simply change 2 bits in PSW.MASK to advertise
the current memory mode. While we can't fully guarantee that 31 bit
mode (or even remotely 24 bit mode) actually work correctly, we don't
check whether lpswe modifies these bits, so we shouldn't keep the
guest from executing SAM instructions either.
This patch implements all SAM instrutions with their actual PSW changing
semantics, making more recent Linux kernels boot properly which do issue
a SAM31 call during early boot.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When injecting an sclp console interrupt into the guest, we increase
the PC by 4 for some reason. I have no idea why I put that code there,
but it's clearly wrong. Remove the increment.
This patch fixes sclp serial input for the ccw machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Patch queue for ppc - 2014-11-04
Fun things for 2.2:
- e500 virt machine: power off support (needs 3.19 guests)
- e500 virt machine: -device eTSEC support
- new framework to allow dynamic spawning of sysbus devices
- spapr: enable migration of nvram
- new 440x5wDFPU cpu type
- Altivec and other random fixes
# gpg: Signature made Tue 04 Nov 2014 22:26:39 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (34 commits)
spapr: Allow dynamic creation of PHB
target-ppc: Fix Altivec Round Opcodes
target-ppc: Fix vcmpbfp. Unordered Case
target-ppc: Fix Altivec Shifts
target-ppc: simplify AES emulation
e500: Add support for eTSEC in device tree
PPC: e500: Support dynamically spawned sysbus devices
sysbus: Add new platform bus helper device
sysbus: Expose MMIO enumeration helper
sysbus: Expose IRQ enumeration helpers
sysbus: Make devices spawnable via -device
sysbus: Add dynamic sysbus device search
hw/ppc/spapr_pci.c: Avoid functions not in glib 2.12 (g_hash_table_iter_*)
ppc: do not look at the MMU index to detect PR/HV mode
target-ppc: kvm: Fix memory overflow issue about strncat()
spapr_nvram: Enable migration
PPC: E500: Hook up power off GPIO to GPIO controller
PPC: E500: Instantiate MPC8XXX gpio controller on virt machine
PPC: Add MPC8XXX gpio controller
target-ppc: Fix an invalid free in opcode table handling code.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we finally check for presence of dangling sysbus devices, make check
started complaining that the sPAPR PHB is one such device.
However, it really isn't. The spapr PHB is not really a traditional sysbus
device, but much more a special spapr pv device which is already able to get
created dynamically.
Move spapr to its own dynamic sysbus check handling and allow PHB devices to
get allocated dynamically.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of Vector Compare Bounds Single Precision.
Specifically, fix the case where the operands are unordered -- since
the result is non-zero, the CR[6] field should be set to zero.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of the Altivec shift left and shift right
instructions (vsl, vsr) which erroneously inverts shift direction
on big endian hosts.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch simplifies the AES code, by directly accessing the newly added
S-Box, InvS-Box tables instead of recreating them by using the AES_Te and
AES_Td tables.
Cc: Alexander Graf <agraf@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support to expose eTSEC devices in the dynamically created
guest facing device tree. This allows us to expose eTSEC devices into guests
without changes in the machine file.
Because we can now tell the guest about eTSEC devices this patch allows the
user to specify eTSEC devices via -device at all.
Signed-off-by: Alexander Graf <agraf@suse.de>
For e500 our approach to supporting dynamically spawned sysbus devices is to
create a simple bus from the guest's point of view within which we map those
devices dynamically.
We allocate memory regions always within the "platform" hole in address
space and map IRQs to predetermined IRQ lines that are reserved for platform
device usage.
This maps really nicely into device tree logic, so we can just tell the
guest about our virtual simple bus in device tree as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
We need to support spawning of sysbus devices dynamically via the command line.
The easiest way to represent these dynamically spawned devices in the guest's
memory and IRQ layout is by preallocating some space for dynamic sysbus devices.
This is what the "platform bus" device does. It is a sysbus device that exports
a configurably sized MMIO region and a configurable number of IRQ lines. When
this device encounters sysbus devices that have been dynamically created and not
manually wired up, it dynamically connects them to its own pool of resources.
The machine model can then loop through all of these devices and create a guest
configuration (device tree) to make them visible to the guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices have a range of MMIO regions they expose. The exact number
of regions is device specific and internal information to the device model.
Expose whether a region exists via a public interface. That way our platform
bus enumeration code can dynamically determine how many regions exist.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can be spawned by C code or dynamically via the command line.
In the latter case, we need to be able to find the dynamically created devices
to do things with them.
This patch adds a search helper that makes it easy to look for dynamically
spawned sysbus devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MMU index is an internal detail that should not be needed by the
translator (except to generate loads and stores). Look at the MSR
directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
strncat() will append additional '\0' to destination buffer, so need
additional 1 byte for it, or may cause memory overflow, just like other
area within QEMU have done.
And can use g_strdup_printf() instead of strncat(), which may be more
easier understanding.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The only case when sPAPR NVRAM migrates now is if is backed by a file and
copy-storage migration is performed. In other cases NVRAM does not
migrate regardless whether it is backed by a file or not.
This enables shadow copy of NVRAM in RAM which is read from a file
(if used) and used for reads. Writes to NVRAM are mirrored to the file.
This defines a VMSTATE descriptor for NVRAM device so the memory copy
of NVRAM can migrate and be flushed to a backing file on the destination
if one is specified.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have a working GPIO controller on the virt machine, we can use
one pin to notify QEMU that the guests wants to power off the system.
Signed-off-by: Alexander Graf <agraf@suse.de>
With the e500 virt machine, we don't have to adhere to the exact hardware
layout of an mpc8544ds board. So there we can just add a qoriq compatible
GPIO controller into the system that we can add a power off hook to.
Signed-off-by: Alexander Graf <agraf@suse.de>
On e500 systems most SoCs implement a common GPIO controller that Linux
calls the "mpc8xxx" gpio controller. This patch adds an emulation model
for this device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Opcode table has direct, indirect and double indirect handlers, but
ppc_cpu_unrealizefn() frees direct handlers which are never allocated
and never frees double indirect handlers.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Define and use macros instead of direct numbers wherever
possible in ppc opcodes table handling code.
This doesn't change any code functionality.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440
with an external APU FPU in double precision mode
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch remove limitation for fc[tf]id[*] on 32 bits targets and
add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64
Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The in-kernel OpenPIC emulation only supports a single map. However, we
map the OpenPIC at 2 locations: The CPU visible one and the PCI visible
one. For KVM acceleration, we only care about the first one.
To make sure that we only map that first mapping and not the PCI map that
happens dynamically later during bootup, ignore maps that happen when
we are already considering ourselves mapped.
Credits due are to Bogdan and Mihai for debugging this.
Reported-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Reported-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to
represent the machine type as it appeared to the guest in different qemu
versions. This allows for safe migration of guests between current and
future qemu versions.
However, these are organized a bit differently from those for PC: on PC,
the default plain "pc" machine type is just an alias for the most recent
versioned machine type. In sPAPR, it names the base machine class from
which the versioned types are derived.
The PC approach is preferable; it makes it clearer which explicit version
is the current one. Additionally updating the "current" machine as the
base class makes it even more likely than otherwise to incorrectly alter
the versioned machines' behaviour when updating the current machine.
Therefore this patch changes sPAPR to the PC approach - the base class
becomes abstract, and plain "pseries" becomes an alias for the most
recent versioned machine class. Since qemu-2.1 is now released, we also
create a new pseries-2.2 machine type, to incorporate changes during this
development cycle (for now it is identical to pseries-2.1).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The virtex-ml507 is a Xilinx CPU based system, and requires several sub
devices which are only included with CONFIG_XILINX. Therefore, it should
only be compiled if CONFIG_XILINX is set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Adjust the IVOR mask for generic Book E implementation to support bit 59.
This is consistent with the Power ISA.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reported-by: Pierre Mallard <mallard.pierre@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
By mistake, QEMU uses the maximum compatibility level from the command
line instead of the value negotiated in client-architecture-support call.
This replaces @max_compat with @cpu_version. This only affects guests
which do not support the host CPU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
It must return 8 and place 8 in XER, but the current code uses
i directly which is 9 at this point of the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
QOM infrastructure fixes and device conversions
* Fixes for -device foo,help
# gpg: Signature made Tue 04 Nov 2014 17:27:41 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Use qdev_get_device_class() for -device <type>,help
qdev: Move error printing to the end of qdev_device_help()
qdev: Create qdev_get_device_class() function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make sure we try to list properties from classes that can be safely used
with "-device".
Fixes the following crashes:
$ qemu-system-x86_64 -device x86_64-cpu,help
**
ERROR:qom/object.c:336:object_initialize_with_type: assertion failed: (type->abstract == false)
Aborted (core dumped)
$ qemu-system-x86_64 -device host-x86_64-cpu,help
qemu-system-x86_64: [...]/target-i386/cpu.c:1329: host_x86_cpu_initfn: Assertion `(kvm_allowed)' failed.
Aborted (core dumped)
After applying this patch:
$ qemu-system-x86_64 -device x86_64-cpu,help
Parameter 'driver' expects non-abstract device type
$ qemu-system-x86_64 -device host-x86_64-cpu,help
Parameter 'driver' expects pluggable device type
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Extract the DeviceClass lookup from qdev_device_add() to a separate
function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QOM CPUState and X86CPU
* Cleanups for -cpu ...,enforce
* remotes/afaerber/tags/qom-cpu-for-peter:
target-i386: Disable SVM by default in KVM mode
target-i386: Don't enable nested VMX by default
target-i386: Remove unsupported bits from all CPU models
target-i386: Disable CPUID_ACPI by default in KVM mode
target-i386: Rename KVM auto-feature-enable compat function
pc: Create pc_compat_2_1() functions
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
[PMM: Fixed minor textual conflicts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make SVM be disabled by default on all CPU models when in KVM mode.
Nested SVM is enabled by default in the KVM kernel module, but it is
probably less stable than nested VMX (which is already disabled by
default).
Add a new compat function, x86_cpu_compat_kvm_no_autodisable(), to keep
compatibility on previous machine-types.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
TCG doesn't support VMX, and nested VMX is not enabled by default in the
KVM kernel module.
So, there's no reason to have VMX enabled by default on the core2duo and
coreduo CPU models, today. Even the newer Intel CPU model definitions
don't have it enabled.
In this case, we need machine-type compat code, as people may be running
the older machine-types on hosts that had VMX nesting enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The following CPU features were never supported by neither TCG or KVM,
so they are useless on the CPU model definitions, today:
* CPUID_DTS (DS)
* CPUID_HT
* CPUID_TM
* CPUID_PBE
* CPUID_EXT_DTES64
* CPUID_EXT_DSCPL
* CPUID_EXT_EST
* CPUID_EXT_TM2
* CPUID_EXT_XTPR
* CPUID_EXT_PDCM
* CPUID_SVM_LBRV
As using "enforce" mode is the only way to ensure guest ABI doesn't
change when moving to a different host, we should make "enforce" mode
the default or at least encourage management software to always use it.
In turn, to make "enforce" usable, we need CPU models that work without
always requiring some features to be explicitly disabled. This patch
removes the above features from all CPU model definitions.
We won't need any machine-type compat code for those changes, because it
is impossible to have existing VMs with those features enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
KVM never supported the CPUID_ACPI flag, so it doesn't make sense to
have it enabled by default when KVM is enabled.
The motivation here is exactly the same we had for the MONITOR flag
(disabled by commit 136a7e9a85).
And like in the MONITOR flag case, we don't need machine-type compat code
because it is currently impossible to run a KVM VM with the ACPI flag set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
target-arm queue:
* avoid passing CPU env pointer around in A32/T32 decoders
* split M profile exception masking out from A/R profile
# gpg: Signature made Tue 04 Nov 2014 12:28:15 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141104:
target-arm: Correct condition for taking VIRQ and VFIQ
target-arm: Separate out M profile cpu_exec_interrupt handling
target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()
target-arm/translate.c: Don't pass CPUARMState around in the decoder
target-arm/translate.c: Don't use IS_M()
target-arm/translate.c: Use arm_dc_feature() rather than arm_feature()
target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macros
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update OpenBIOS images
# gpg: Signature made Tue 04 Nov 2014 00:24:41 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M profile cpu_exec_interrupt handling is fairly simple
but does include an M profile specific oddity (disabling
interrupts for certain PC values). A/R profile handling
on the other hand is getting rapidly more complicated
with the support for EL2 and EL3. Split the M profile
code out into its own implementation of cpu_exec_interrupt
to keep these two things out of each others' way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1414684132-23971-2-git-send-email-peter.maydell@linaro.org
Passing the CPUARMState around in the decoder is a recipe for
bugs where we accidentally generate code that depends on CPU
state which isn't reflected in the TB flags. Stop doing this
and instead use DisasContext as a way to pass around those
bits of CPU state which are known to be safe to use.
This commit simply removes initial "CPUARMState *env" parameters
from various function definitions, and removes the initial "env"
argument from the places where those functions are called.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
In fullscreen mode, we attempt to shrink the menubar to 1 pixel in height,
so it takes up as little room as possible while still allowing us to use
the keyboard shortcuts for its various operations.
However this shrinking is disregarded on gtk3, so the entire menu bar is
visible, which isn't very pleasant. This patch hides the menu bar instead.
The side effect is that the only keyboard shortcuts that will work in this
mode are the ones that we explicitly register on the top level window and
not the menu bar. The previous patches changed the fullscreen and vc
shortcuts to work like that, which I think are the only ones that really
matter in for the fullscreen case.
https://bugs.launchpad.net/qemu/+bug/1294898
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So they are usable when we hide the menubar in upcoming patches. This
has the accelerator text caveat as the fullscreen bit in the previous
patch.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of installing it on the menu. This will be needed to keep the
fullscreen keyboard shortcut working when we hide the menu (in future
patches).
On gtk < 3.8, this has the unfortunate side effect of no longer listing
the key combo in the UI. We could manually change the label in that case,
but it will look visually out of place, and I'm not sure if anyone really
cares.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user pull for 2.2
Two minor fixes and new a feature, addition of QEMU_RAND_SEED for
testing needs.
# gpg: Signature made Mon 03 Nov 2014 11:49:39 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20141101:
elf: take phdr offset into account when calculating the program load address
linux-user: Fix fault address truncation AArch64
linux-user: Let user specify random seed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The x86_cpu_compat_disable_kvm_features() name was a bit confusing, as
it won't forcibly disable the feature for all CPU models (i.e. add it to
kvm_default_unset_features), but it will instead turn off the KVM
auto-enabling of the feature (i.e. remove it from kvm_default_features),
meaning the feature may still be enabled by default in some CPU models).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We will need new compat code for the 2.1 machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch switches the default display from cirrus to vga
for the new (qemu 2.2+) machine types. Old machines types
stay as-is for compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows machine classes to specify which display device they want
as default. If unspecified the current behavior (try cirrus, failing
that try stdvga, failing that use no display) will be used.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_get_ram_block_host_ptr should get ram_addr_t,
vhost-user passes in GPA.
That's very wrong.
Reported-by: Linhaifeng <haifeng.lin@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last round of patches for soft freeze. Includes ivshmem bugfixes,
megasas 2108 emulation, and other small patches here and there.
# gpg: Signature made Fri 31 Oct 2014 17:17:54 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (35 commits)
virtio-scsi: fix dataplane
ivshmem: use error_report
ivshmem: Fix fd leak on error
ivshmem: Fix potential OOB r/w access
ivshmem: validate incoming_posn value from server
ivshmem: Check ivshmem_read() size argument
i386: fix breakpoints handling in icount mode
kvm_stat: Add powerpc support
kvm_stat: Abstract ioctl numbers
kvm_stat: Rework platform detection
kvm_stat: Fix the non-x86 exit reasons
kvm_stat: Only consider online cpus
virtio-scsi: Fix num_queue input validation
scsi: devirtualize unrealize of SCSI devices
virtio-scsi: Fix memory leak when realize failed
iscsi: Refuse to open as writable if the LUN is write protected
kvmvapic: patch_instruction fix
vl.c: Fix Coverity complaining for vmstate_dump_file
Add skip_dump flag to ignore memory region during dump
-machine vmport=off: Allow disabling of VMWare ioport emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add MSA MI10 format instructions
update LSA and DLSA for MSA
add 16, 64 bit load and store
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Release 6 limits the number of cases where software can cause UNDEFINED or
UNPREDICTABLE behaviour. In this case, when accessing reserved / unimplemented
CP0 register, writes are ignored and reads return 0.
In pre-R6 the behaviour is not specified, but generating RI exception is not
what the real HW does.
Additionally, remove CP0 Random register as it became reserved in Release 6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
In Release 6 not all the values are allowed to be written to a register.
If the value is not valid or unsupported then it should stay unchanged.
For pre-R6 the existing behaviour has been changed only for CP0_Index register
as the current implementation does not seem to be correct - it looks like it
tries to limit the input value but the limit is higher than the actual
number of tlb entries.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
When conditional compact branch is encountered decode one more instruction in
current translation block - that will be forbidden slot. Instruction in
forbidden slot will be executed only if conditional compact branch is not taken.
Any control transfer instruction (CTI) which are branches, jumps, ERET,
DERET, WAIT and PAUSE will generate RI exception if executed in forbidden or
delay slot.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
SDBBP instruction Reserved Instruction control. The purpose of this field is
to restrict availability of SDBBP to kernel mode operation.
If the bit is set then SDBBP instruction can only be executed in kernel mode.
User execution of SDBBP will cause a Reserved Instruction exception.
Additionally add missing Config4 and Config5 cases for dm{f,t}c0.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
BadInstr Register (CP0 Register 8, Select 1)
The BadInstr register is a read-only register that capture the most recent
instruction which caused an exception.
BadInstrP Register (CP0 Register 8, Select 2)
The BadInstrP register contains the prior branch instruction, when the
faulting instruction is in a branch delay slot.
Using error_code to indicate whether AdEL or TLBL was triggered during
instruction fetch, in this case BadInstr is not updated as valid instruction
word is not available.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
For Standard TLB configuration (Config.MT=1):
TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.
TLBINVF causes all entries to be invalidated.
Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
An Execute-Inhibit exception occurs when the virtual address of an instruction
fetch matches a TLB entry whose XI bit is set. This exception type can only
occur if the XI bit is implemented within the TLB and is enabled, this is
denoted by the PageGrain XIE bit.
An Read-Inhibit exception occurs when the virtual address of a memory load
reference matches a TLB entry whose RI bit is set. This exception type can
only occur if the RI bit is implemented within the TLB and is enabled, this is
denoted by the PageGrain RIE bit.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
PageGrain needs rw bitmask which differs between MIPS architectures.
In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable,
whereas in R6 they are read-only 1.
On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward
compatiblity, therefore there are separate mtc0 and dmtc0 helpers.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
In Revision 3 of the architecture, the RI and XI bits were added to the TLB
to enable more secure access of memory pages. These bits (along with the Dirty
bit) allow the implementation of read-only, write-only, no-execute access
policies for mapped pages.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
New MIPS features depend on the access type and enum is more convenient than
using the numbers directly.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
KScratch<n> Registers (CP0 Register 31, Selects 2 to 7)
The KScratch registers are read/write registers available for scratch pad
storage by kernel mode software. They are 32-bits in width for 32-bit
processors and 64-bits for 64-bit processors.
CP0Config4.KScrExist[2:7] bits indicate presence of CP0_KScratch1-6 registers.
For Release 6, all KScratch registers are required.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
The commit block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
One detail here is that the bdrv_drain_all() must be moved inside the
aio_context_acquire() region so requests cannot sneak in between the
drain and acquire.
The completion code in block/commit.c must perform backing chain
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-11-git-send-email-stefanha@redhat.com
The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
The stream block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The tricky part is the completion code which drops part of the backing
file chain. This must be done in the main loop where bdrv_unref() and
bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to
achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
The backup block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The completion code in block/backup.c must call bdrv_unref() from the
main loop. Use block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
Block jobs will run in the BlockDriverState's AioContext, which may not
always be the QEMU main loop.
There are some block layer APIs that are either not thread-safe or risk
lock ordering problems. This includes bdrv_unref(), bdrv_close(), and
anything that calls bdrv_drain_all().
The block_job_defer_to_main_loop() API allows a block job to schedule a
function to run in the main loop with the BlockDriverState AioContext
held.
This function will be used to perform cleanup and backing chain
manipulations in block jobs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
When an emulated storage controller is unrealized it will call
blockdev_mark_auto_del(). This will cancel any running block job (and
that eventually releases its reference to the BDS so it can be freed).
Since the block job may be executing in another AioContext we must
acquire/release to ensure thread safety.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-4-git-send-email-stefanha@redhat.com
block-job-set-speed, block-job-cancel, block-job-pause,
block-job-resume, and block-job-complete must acquire the
BlockDriverState AioContext so that it is safe to access bs.
At the moment bs->job is always NULL when dataplane is active because op
blockers prevent blockjobs from starting. Once the rest of the blockjob
API has been made aware of AioContext we can drop the op blocker.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-2-git-send-email-stefanha@redhat.com
Currently, we have a bitmap for keeping track of which clusters have
been created during the zero cluster expansion process. This was
necessary because we need to properly increase the refcount for shared
L2 tables.
However, now we can simply take the L2 refcount and use it for the
cluster allocated for expansion. This will be the correct refcount and
therefore we don't have to remember that cluster having been allocated
any more.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only really time-consuming operation potentially performed by
qcow2_amend_options() is zero cluster expansion when downgrading qcow2
images from compat=1.1 to compat=0.10, so report status of that
operation and that operation only through the status CB.
For this, approximate the progress as the number of L1 entries visited
during the operation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevented by specifying either -d or -b) and does therefore not
work for qed and vmdk which requires it to be separate from 020.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new parameter for qemu-img commit which may be used to
explicitly specify the backing file into which an image should be
committed if the backing chain has more than a single layer.
[Applied Eric Blake's qemu-img.texi documentation rewording
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of taking the total length of the block device as the block
job's length, use the number of dirty sectors. The progress is now the
number of sectors mirrored to the target block device. Note that this
may result in the job's length increasing during operation, which is
however in fact desirable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As of a follow-up patch to this one, the length of a mirror block job
will no longer directly depend on the size of the block device;
therefore, drop these checks from this test. Instead, just check whether
the final offset equals the block job length.
As 041 uses the wait_until_completed function from iotests.py, the same
applies there as well which in turn affects tests 030, 055 and 056. On
the other hand, a block job's length does not have to be related to the
length of the image file in the first place, so that check was
questionable anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a block job signals readiness, this is currently reported only
through QMP. If qemu wants to use block jobs for internal tasks, there
needs to be another way to correctly detect when a block job may be
completed.
For this reason, introduce a bool "ready" which is set when the block
job may be completed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normally, discarded sectors should read back as zero. However, there are
cases in which a sector (or rather cluster) should be discarded as if
they were never written in the first place, that is, reading them should
fall through to the backing file again.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should not be happening, but it is possible to truncate an image
outside of qemu while qemu is running (or any of the qemu tools using
the block layer. raw_co_get_block_status() should not break then.
While touching this test, replace the existing "truncate" invocation by
"$QEMU_IMG convert -f raw".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414148280-17949-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of generating the full return value thrice in try_fiemap(),
try_seek_hole() and as a fall-back in raw_co_get_block_status() itself,
generate the value only in raw_co_get_block_status().
While at it, also remove the pnum parameter from try_fiemap() and
try_seek_hole().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.
An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.
Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).
Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_opt_get_number returns a uint64_t, and curl_easy_setopt expects a
long (not an int). There is no warning about the latter type error
because curl_easy_setopt uses a varargs argument.
Store the timeout (which is a positive number of seconds) as a
uint64_t. Check that the number given by the user is reasonable.
Zero is permissible (meaning no timeout is enforced by cURL).
Cast it to long before calling curl_easy_setopt to fix the type error.
Example error message after this change has been applied:
$ ./qemu-img create -f qcow2 /tmp/test.qcow2 \
-b 'json: { "file.driver":"https",
"file.url":"https://foo/bar",
"file.timeout":-1 }'
qemu-img: /tmp/test.qcow2: Could not open 'json: { "file.driver":"https", "file.url":"https://foo/bar", "file.timeout":-1 }': timeout parameter is too large or negative: Invalid argument
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The local variable 'ac' in send_qmp_error_event() is declared with the
wrong type, which causes clang to complain when it is initialized
and again when it is used:
block.c:3655:20: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~
block.c:3655:45: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~~
block.c:3656:62: warning: implicit conversion from enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') to different enumeration type 'IoOperationType' (aka 'enum IoOperationType') [-Wenum-conversion]
qapi_event_send_block_io_error(bdrv_get_device_name(bs), ac, action,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~
Correct the type to IoOperationType, and rename the variable
to 'optype' to match its correct type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1412969583-21045-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
found by valgrind.
Command: ./qemu-img convert -f parallels -O qcow2 1.hds 1.img
Invalid read of size 4
at 0x17D0EF: parallels_co_read (parallels.c:357)
by 0x11FEE4: bdrv_aio_rw_vector (block.c:4640)
by 0x11FFBF: bdrv_aio_readv_em (block.c:4652)
by 0x11F55F: bdrv_co_readv_em (block.c:4862)
by 0x123428: bdrv_aligned_preadv (block.c:3056)
by 0x1239FA: bdrv_co_do_preadv (block.c:3162)
by 0x125424: bdrv_rw_co_entry (block.c:2706)
by 0x155DD9: coroutine_trampoline (coroutine-ucontext.c:118)
by 0x6975B6F: ??? (in /lib/x86_64-linux-gnu/libc-2.19.so)
The problem is that s->catalog_bitmap is allocated/filled as
gmalloc(s->catalog_size) thus index validity check must be
inclusive, i.e. index >= s->catalog_size is invalid.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-4-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an error occurs in bdrv_snapshot_delete_by_id_or_name(), "err" is
freed. If "err" is not set to NULL before calling
bdrv_snapshot_delete_by_id_or_name() again, it will not be updated on
error, and will be freed again.
This can be triggered by starting a VM with at least two drives and then
attempting to delete a non-existent snapshot.
Broken in commit a89d89d.
Signed-off-by: Chris Spiegel <chris.spiegel@cypherpath.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412613225-32676-1-git-send-email-chris.spiegel@cypherpath.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The SDB FIS creation was mangled;
We were writing the error byte to byte 0,
and omitting the SDB FIS magic byte.
Though the SDB packet layout states that:
byte 0: Must be 0xA1 to indicate SDB FIS.
byte 1: Port multiplier select & other flags
byte 2: status byte.
byte 3: error byte.
This patch adds an SDB FIS structure with
human-readable names, and ensures that we
are filling the structure appropriately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, DMA read/write operations neglect to update
the byte count after a successful transfer like ATAPI
DMA read or PIO read/write operations do.
We correct this oversight by adding another callback into
the IDEDMAOps structure. The commit callback is called
whenever we are cleaning up a scatter-gather list.
AHCI can register this callback in order to update post-
transfer information such as byte count updates.
We use this callback in AHCI to consolidate where we delete
the SGlist as generated from the PRDT, as well as update the
byte count after the transfer is complete.
The QEMUSGList structure has an init flag added to it in order
to make qemu_sglist_destroy a nop if it is called when
there is no sglist, which simplifies cleanup and error paths.
This patch fixes several AHCI problems, notably Non-NCQ modes
of operation for Windows 7 as well as Hibernate support for Windows 7.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, the D2H FIS packets AHCI generates simply parrot back
the LBA that the guest sent to us in the cmd_fis. However, some
commands (like READ NATIVE MAX) modify the LBA registers as a
return value, through which the AHCI D2H FIS is the only response
mechanism. Thus, the D2H response should use the current register
values, not the initial ones.
This patch adjusts the LBA and drive select register responses for
PIO Setup and D2H FIS response packets.
Additionally, the PIO and D2H FIS responses copy too many bytes
from the command FIS that it is being generated from. Specifically,
byte 11 which is the Features(15:8) field for Register Host to
Device FIS packets, is instead reserved for the PIO Setup FIS and
should always be 0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cancel oversized requests early. They would generate
an iSCSI protocol error anyway; after having transferred
possibly a lot of data over the wire.
Suggested-By: Max Reitz <mreitz@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As Max pointed out there is a hidden cast from int64_t to int for all
limits. So use the newly introduced sector_limits_lun2qemu for all
limits received from the target.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Copy the max_xfer_len from the BlockLimits VPD or use the
maximum value fitting in the CDB.
The helper function sector_limits_lun2qemu is introduced to convert
and cap the limits from the VPD to the maximum power of two fitting
in an integer; integer is the range for nb_sectors throughout
the block layer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
at least in block layer we have the case of limits being defined for a
BlockDriverState. However, in this context often zero (0) has the special
meanining of undefined which means no limit. If two of those limits are
combined and the minimum is needed the minimum function should only return
zero if both parameters are zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first program header does not necessarily start at offset 0. This change
corresponds to what the Linux kernel does in load_elf_binary().
Signed-off-by: Jonas Maebe <jonas.maebe@elis.ugent.be>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On AArch64 the si_addr field of siginfo_t is truncated to 32 bits
because the fault address passes through an uint32_t variable.
Follow Peters suggestion and drop the uint32_t variable
since its only used once in the Aarch64 loop.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces the -seed command line option and the
QEMU_RAND_SEED environment variable for setting the random seed, which
is used for the AT_RANDOM ELF aux entry.
Signed-off-by: Magnus Reftel <reftel@spotify.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
- fix file names that were changed by the commit
b707ab7 hw/xtensa: remove extraneous xtensa_ prefix from file names
- mark OpenCores 10/100 Mbit MAC model as maintained.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cores without windowed registers don't have window overflow/underflow
vectors. Move these vectors to a separate group defined conditionally.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This script copies configuration and gdb information from the xtensa
configuration overlay archive and registers new xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
U-boot for xtensa always treats uImage load address as virtual address.
This is important when booting uImage on xtensa core with MMUv2, because
MMUv2 has fixed non-identity virtual-to-physical mapping after reset.
Always do virtual-to-physical translation of uImage load address and
load uImage at the translated address. This fixes booting uImage kernels
on dc232b and other MMUv2 cores.
Cc: qemu-stable@nongnu.org
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Timer interrupt should be raised at the same cycle when CCOUNT equals
CCOMPARE. As cycles are counted in batches, timer interrupt is sent
every time CCOMPARE lies in the interval [old CCOUNT, new CCOUNT]. This
is wrong, because when new CCOUNT equals CCOMPARE interrupt is sent
twice, once for the upper interval boundary and once for the lower. Fix
that by excluding lower interval boundary from the condition.
This doesn't have user-visible effect, because CCOMPARE reload always
causes CCOUNT increment followed by current timer interrupt reset.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores have configurable interrupt vectors and endiannes. This
information is needed to link executable images correctly for a specific
core configuration. Instead of hard-coding dc232 defaults pull endianness,
number of high-priority interrupts and location of vectors from the core
configuration and pass it through the C preprocessor.
While at it clean up tabs and align the initial stack on 16 bytes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's new interrupt type in the recent Xtensa releases that may appear
in configuration overlay. Add definition so that new cores that use it
could be automatically imported.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are three ACPI tables: 'linker_data', 'rsdp' and 'table_data'. They are
used differently. Two of them are being copied before using and only the copy
is used later. But the third is used directly. Because of that we need to free
two tables completely and delete only wrapper for the third one.
Valgrind output:
==23931== 131,072 bytes in 1 blocks are definitely lost in loss record 7,729 of 7,734
==23931== at 0x4C2CE8E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==23931== by 0x2EA920: realloc_and_trace (vl.c:2811)
==23931== by 0x509E6AE: g_realloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4000.0)
==23931== by 0x506DB32: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4000.0)
==23931== by 0x506E463: g_array_set_size (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4000.0)
==23931== by 0x256A4F: acpi_align_size (acpi-build.c:487)
==23931== by 0x259F92: acpi_build (acpi-build.c:1601)
==23931== by 0x25A212: acpi_setup (acpi-build.c:1682)
==23931== by 0x24F346: pc_guest_info_machine_done (pc.c:1110)
==23931== by 0x55FAAB: notifier_list_notify (notify.c:39)
==23931== by 0x2EA704: qemu_run_machine_init_done_notifiers (vl.c:2759)
==23931== by 0x2EEC3C: main (vl.c:4504)
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Differently from older versions, SMBIOS version 2.6 is explicit about
the encoding of UUID fields:
> Although RFC 4122 recommends network byte order for all fields, the PC
> industry (including the ACPI, UEFI, and Microsoft specifications) has
> consistently used little-endian byte encoding for the first three fields:
> time_low, time_mid, time_hi_and_version. The same encoding, also known as
> wire format, should also be used for the SMBIOS representation of the UUID.
>
> The UUID {00112233-4455-6677-8899-AABBCCDDEEFF} would thus be represented
> as 33 22 11 00 55 44 77 66 88 99 AA BB CC DD EE FF.
The dmidecode tool implements this and decodes the above "wire format"
when SMBIOS version >= 2.6. We moved from SMBIOS version 2.4 to 2.8 when
we started building the SMBIOS entry point inside QEMU, on commit
c97294ec1b.
Change smbios_build_type_1_table() to encode the UUID as specified.
To make sure we won't change the guest-visible UUID when upgrading to a
newer QEMU version, keep the old behavior on pc-*-2.1 and older.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The event idx in virtio is an effective way to reduce the number of
interrupts and exits of the guest. When the guest puts an request
into the virtio ring, it doesn't exit immediately to inform the
backend. Instead, the guest checks the "avail" event idx to determine
the notification.
In virtqueue_pop, when a request is poped, the current avail event
idx should be set to the number of vq->last_avail_idx.
Signed-off-by: Bin Wu <wu.wubin@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Hot-plugging a device that has a romfile (either supplied by user
or built-in) using rombar=0 option is a user error,
do not allow the device to be hot-plugged.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Introduce helper function acpi_set_cpu_present_bit() to simplify acpi_cpu_plug_cb
and acpi_cpu_hotplug_init, so that we can keep bit setting in one place.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Rename:
AcpiCpuHotplug_init --> acpi_cpu_hotplug_init
AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops
for better readability, just cleanup.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add cpu hotplug handler to PC_MACHINE, which will perform the acpi
cpu hotplug callback via hotplug_handler API.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Create the TCPA log in a separate file rather than allocating
ACPI table memory for it.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current support for bus master (clearing OK bit) together with the need to
support guests which do not enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust in case of cross-version
migration for the case when guests use the device before setting DRIVER_OK.
Rip out this code, and replace it:
- Modern QEMU doesn't need VIRTIO_PCI_FLAG_BUS_MASTER_BUG
so just drop it for latest machine type.
- For compat machine types, set PCI_COMMAND if DRIVER_OK
is set.
As this is needed for 2.1 for both pc and ppc, move PC_COMPAT macros from pc.h
to a new common header.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
This comment applies to all functions below it.
It is not appropriate that called capability allocation
functions, change it into capability list management functions.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a 16-bytes buffer to allow storing a 128-bit UUID value in an
ACPI table.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to be able to address both the QEMU and the KVM APIC via "apic".
This doesn't work anymore. So we need to use their parent class to turn
off the vapic on machines that should not expose them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With this patch applied, the output of -M \? is
> Supported machines are:
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> isapc ISA-only PC
> none empty machine
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1145042
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Commit 261747f1 ("vl: Use MachineClass instead of global QEMUMachine
list") broke the ordering of the machine types in the user-visible output
of
qemu-system-XXXX -M \?
This occurred because registration was rebased from a manually maintained
linked list to GLib hash tables:
qemu_register_machine()
type_register()
type_register_internal()
type_table_add()
g_hash_table_insert()
and because the listing was rebased accordingly, from the traversal of the
list to the traversal of the hash table (rendered as an ad-hoc list):
machine_parse()
object_class_get_list(TYPE_MACHINE)
object_class_foreach()
g_hash_table_foreach()
The current order is a "random" one, for practical purposes, which is
annoying for users.
Introduce new members QEMUMachine.family and MachineClass.family, allowing
machine types to be "clustered". Introduce a comparator function that
establishes a total ordering between machine types, ordering machine types
in the same family next to each other. In machine_parse(), list the
supported machine types sorted with the comparator function.
The comparator function:
- sorts whole families before standalone machine types,
- sorts whole families between each other in alphabetically increasing
order,
- sorts machine types inside the same family in alphabetically decreasing
order,
- sorts standalone machine types between each other in alphabetically
increasing order.
After this patch, all machine types are considered standalone, and
accordingly, the output is alphabetically ascending. This will be refined
in the following patches.
Effects on the x86_64 output:
Before:
> Supported machines are:
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> isapc ISA-only PC
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> none empty machine
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
After:
> Supported machines are:
> isapc ISA-only PC
> none empty machine
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
Effects on the aarch64 output:
Before:
> Supported machines are:
> lm3s811evb Stellaris LM3S811EVB
> canon-a1100 Canon PowerShot A1100 IS
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> connex Gumstix Connex (PXA255)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> lm3s6965evb Stellaris LM3S6965EVB
> versatileab ARM Versatile/AB (ARM926EJ-S)
> borzoi Borzoi PDA (PXA270)
> tosa Tosa PDA (PXA255)
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> midway Calxeda Midway (ECX-2000)
> mainstone Mainstone II (PXA27x)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> terrier Terrier PDA (PXA270)
> highbank Calxeda Highbank (ECX-1000)
> cubieboard cubietech cubieboard
> sx1-v1 Siemens SX1 (OMAP310) V1
> sx1 Siemens SX1 (OMAP310) V2
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> akita Akita PDA (PXA270)
> z2 Zipit Z2 (PXA27x)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> spitz Spitz PDA (PXA270)
> none empty machine
> virt ARM Virtual Machine
> collie Collie PDA (SA-1110)
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> verdex Gumstix Verdex (PXA270)
> nuri Samsung NURI board (Exynos4210)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
After:
> Supported machines are:
> akita Akita PDA (PXA270)
> borzoi Borzoi PDA (PXA270)
> canon-a1100 Canon PowerShot A1100 IS
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> collie Collie PDA (SA-1110)
> connex Gumstix Connex (PXA255)
> cubieboard cubietech cubieboard
> highbank Calxeda Highbank (ECX-1000)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> lm3s6965evb Stellaris LM3S6965EVB
> lm3s811evb Stellaris LM3S811EVB
> mainstone Mainstone II (PXA27x)
> midway Calxeda Midway (ECX-2000)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> none empty machine
> nuri Samsung NURI board (Exynos4210)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> spitz Spitz PDA (PXA270)
> sx1 Siemens SX1 (OMAP310) V2
> sx1-v1 Siemens SX1 (OMAP310) V1
> terrier Terrier PDA (PXA270)
> tosa Tosa PDA (PXA255)
> verdex Gumstix Verdex (PXA270)
> versatileab ARM Versatile/AB (ARM926EJ-S)
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> virt ARM Virtual Machine
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> z2 Zipit Z2 (PXA27x)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1145042
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently allows the number of VCPUs to not be a multiple of the
number of threads per socket, but the smbios socket count calculation
introduced by commit c97294ec1b doesn't
take that into account, triggering an assertion. e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 -smp 4,sockets=2,cores=6,threads=1
qemu-system-x86_64: /home/ehabkost/rh/proj/virt/qemu/hw/i386/smbios.c:825: smbios_get_tables: Assertion `smbios_smp_sockets >= 1' failed.
Aborted (core dumped)
Socket count calculation doesn't belong to smbios.c and should
eventually be moved to the main SMP topology configuration code. But
while we don't move the code, at least make it correct by rounding up
the division.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: qemu-stable@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wrapped uuid_unparse() in #ifdef to avoid "-Wunused-function"
on clang 3.4 or later.
Signed-off-by: SeokYeon Hwang <syeon.hwang@samsung.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In hotplugging scenario, taking those true branch, the file
handler do not be closed. Let's close them before return.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit 5193e5fb (tap: factor out common tap initialization)
introduce net_init_tap_one(). But it's inappropriate that
we close fd in net_init_tap_one(), we should lay it in the
caller, becuase some callers needn't to close it if we get
the fd by monitor_handle_fd_param().
On the other hand, in other exceptional branches fd isn't
closed, so that's incomplete anyway.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DEFAULT_NETWORK_SCRIPT and DEFAULT_NETWORK_DOWN_SCRIPT
have been defined in net/net.h included in
tap.c, which is the only C file that using those two macro.
Let's remove the repeating macroinstruction.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Put "success" parent reporting in os_setup_post() to after
all other initializers which may also fail, to the very end,
so more possible failure cases are reported properly to the
calling process.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
In case of -daemonize, we write non-zero to the daemon
pipe only if pidfile creation failed, so the parent will
report error about pidfile problem. There's no need to
make special case for this, since all other errors are
reported by the child just fine. Let the parent report
error and simplify logic in os_daemonize().
This way, we don't need os_pidfile_error() function, since
it only prints error now, so put the error reporting printf
into the only place where qemu_create_pidfile() is called,
in vl.c.
While at it, fix wrong indentation in os_daemonize().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eliminiate two fullwrite implementations with goto replacing them with
a proper do..while loop.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
When asked to -daemonize, we fork a child and setup a pipe between
it and parent to pass exit status. os-posix.c used global fds[2]
array for that, but actually only the writing side of the pipe is
needed to be global, and this name is really too generic. Use
just one interger for the writing side of the pipe, and name it
daemon_pipe to be more understandable than cryptic fds[1].
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
dump_iterate() dumps blocks in a loop. Eventually, get_next_block()
returns "no more". We then call dump_completed(). But we neglect to
break the loop! Broken in commit 4c7e251a.
Because of that, we dump the last block again. This attempts to write
to s->fd, which fails if we're lucky. The error makes dump_iterate()
return failure. It's the only way it can ever return.
Theoretical: if we're not so lucky, something else has opened something
for writing and got the same fd. dump_iterate() then keeps looping,
messing up the something else's output, until a write fails, or the
process mercifully terminates.
The obvious fix is to restore the return lost in commit 4c7e251a. But
the root cause of the bug is needlessly opaque loop control. Replace it
by a clean do ... while loop.
This makes the badly chosen return values of get_next_block() more
visible. Cleaning that up is outside the scope of this bug fix.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
proxy_init() does not check the return value of connect_namedsocket(),
fix this by rearranging code a little bit.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If connect() in connect_namedsocket() return false, the sockfd will leak.
Plug it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
We reference the return value of cpu before checking whether it is NULL,
The checking code is after that which violates code style.
It makes no difference if the cpu is NULL, qemu process will terminate.
But one will be 'Segmentation fault' and the other will report a error
which is what we want.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It looks like smbd always logs to /var/log/samba/log.$progname
even if config file specifies different logfile -- when it needs
to log something before completing reading the config file. But
if it can't open it for writing, it fails and exits. Tell smbd
to use our temp dir as logbase (-l option) to avoid that.
The same option is used by samba3 and samba4, so there should
be no incompatible changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
This reverts commit e5048d15ce.
qemu_create_pidfile() is only created from main(), and there,
if that function returns failure, os_pidfile_error() function
is called, to, guess that, report error (which is done differently
whenever we're daemonizing or not).
qemu_create_pidfile() function has several error returns, this
lockf() failure is one of them, there are others (another shown
in the patch context too).
So this patch makes whole thing inconsistent at least.
If we need to show error message when we're daemonizing, it
looks like we should modify os_pidfile_error() routine to always
report error and only after that check for daemon mode. This way
all errors will be reported the same way.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, when the preallocating guest memory process fails, a not
so helpful error message is printed out:
# virsh start migt10
error: Failed to start domain migt10
error: internal error: process exited while connecting to monitor:
os_mem_prealloc: failed to preallocate pages
From the error message it's not clear at the first glance where the
problem lies. However, changing the error message might give users a
clue.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
c++ compiler isn't wrapped with cgcc, resulting in gcc complaining about
the sparse compiler flags which it doesn't know in case qemu is built
with --enable-sparse.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The XtensaConfig structs will be defined but not used if they are
for the opposite endianness from that of the binary being built;
keep the compiler from complaining about this by marking them
with the 'unused' attribute.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This will avoid unexpected circular header dependencies in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The test code needs osdep.h for the ARRAY_SIZE macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace all the fprintf(stderr, ...) calls with error_report.
Also make sure exit() consistently uses the error code 1. A few calls
used -1. While at it cleanup some indentation in the printf argument
lists.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix OOB access via malformed incoming_posn parameters
and check that requested memory is actually alloc'ed.
Signed-off-by: Sebastian Krahmer <krahmer@suse.de>
[AF: Rebased, cleanups, avoid fd leak]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check incoming_posn to avoid out-of-bounds array accesses if the ivshmem
server on the host sends invalid values.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Tighten upper bound check for posn in close_guest_eventfds()]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The third argument to the fd_read() callback implemented by
ivshmem_read() is the number of bytes, not a flags field. Fix this and
check we received enough bytes before accessing the buffer pointer.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Handle partial reads via FIFO]
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes instructions counting when execution is stopped on
breakpoint (e.g. set from gdb). Without a patch extra instruction is translated
and icount is incremented by invalid value (which equals to number of
executed instructions + 1).
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Add support for powerpc platforms. We use uname -m, which allows us to
detect ppc, ppc64 and ppc64le/el.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately ioctl numbers are platform specific, so abstract them out
of the code so they can be overridden. As it happens x86 and s390 share
the same values, so nothing needs to change yet.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current platform detection is a little bit messy. We look for lines
in /proc/cpuinfo starting with 'flags' OR 'vendor-id', and scan both
for values we know will only occur in one or the other. We also keep
scanning once we've found a value, which could be a feature, but isn't
in this case.
We'd also like to add another platform, powerpc, which will just make it
worse. So clean it up in preparation.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_stat we have a dictionary of exit reasons for s390. Firstly these
are not s390 specific, they are the generic exit reasons. So rename the
dictionary to reflect that, and add it separately to filters[].
Secondly, the values are defined using hex, but in the kernel header
they are decimal. That means values above 9 in kvm_stat are incorrect.
While we're there, fix the whitespace to match the rest of the file.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_stat we grovel through /sys to find out how many cpus are in the
system. However if a cpu is offline it will still be present in /sys,
and the perf_event_open() will fail.
Modify the logic to only return online cpus. We need to be careful on
systems which don't support cpu hotplug, the online file will not be
present at all.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to count the ctrlq and eventq, and also cleanup before
returning. Besides, the format string should be unsigned.
The number could never be less than zero.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before, when a write protected iSCSI target is attached as scsi-disk
with BDRV_O_RDWR, we report it as writable, while in fact all writes
will fail.
One way to improve this is to report write protect flag as true to
guest, but a even better way is to refuse using a write protected LUN to
guest.
Target write protect flag is checked with a mode sense query.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU works in icount mode cpu_restore_state function performs two actions:
restoring the program counter and updating icount to the correct value.
kvmvapic's patch_instruction function is called by cpu_report_tpr_access
function which also invokes cpu_restore_state. It results to calling
cpu_restore_state twice - in cpu_report_tpr_access and in patch_instruction.
When icount is disabled second call is safe. But when icount is enabled,
cpu_restore_state modifies instructions counter twice, which leads to incorrect
behavior. This patch removes useless cpu_restore_state call from kvmvapic.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
commit abfd9ce3(migration: dump vmstate info as a json
file for static analysis) introduce a new command,
'-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
However, only one instance of the -dump-vmstate option is supported.
If more were given, the vmstate_dump_file variable would be overwritten.
This fix also helps silence a Coverity error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSI-X works slightly different than INTx; the doorbell
registers are not necessarily used as MSI-X interrupts
are directed anyway. So the head pointer on the
reply queue needs to be updated as soon as a frame
is completed, and we can set the doorbell only
when in INTx mode.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows requires the frames to be unmapped, otherwise we run
into a race condition where the updated frame data is not
visible to the guest.
With that we can simplify the queue algorithm and use a bitmap
for tracking free frames.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve queue logging by displaying head and tail pointer
of the completion queue.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some implementations use DCMD_CLUSTER_RESET_LD to simulate
a device reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Compare against id, not lun. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows driver is sending several init_firmware commands
when in MSI-X mode. It is, however, using only the first
queue. So disregard any additional init_firmware commands
until the HBA is reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The EFI firmware doesn't handle unit attentions properly,
so we need to clear the Power On/Reset unit attention upon
initial reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease debugging we should be decoding
the register names.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check for a valid command buffer size was inverted.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 2108 chip supports MSI and MSI-X, so update the emulation
to support both chips.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Make VMStateDescription const. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Logical drives can only be addressed with the 'target_id' number;
LUN numbers cannot be selected.
Physical drives can be selected with both, target and LUN id.
So we should disallow LUN numbers not equal to 0 when in
RAID mode.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The trace events already contain the function name, so the actual
message doesn't need to contain any of these informations.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MFI_DCMD_LD_LIST_QUERY function is using a different format than
MFI_DCMD_LD_LIST, so we need to implement it differently.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_cdb_length() does not return the length of the cdb, but
the transfersize encoded in the cdb. So rename it to scsi_cdb_xfer()
and also rename all other related functions to end with _xfer.
We can then add a new scsi_cdb_length() which actually does return the
length of the cdb. With that DEBUG_SCSI can now display the correct
CDB buffer.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand %.mo-objs in -y nested objects, so that we can write combined
object -cflags rules like what will be done in the coming patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/sstabellini/xen-2014-10-30:
fix off-by-one error in pci_piix3_xen_ide_unplug
xen-hvm.c: Add support for Xen access to vmport
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vnc: return directly if no vnc client connected
vnc: sanitize bits_per_pixel from the client (CVE-2014-7815)
# gpg: Signature made Tue 28 Oct 2014 10:52:31 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vnc-20141028-1:
vnc: return directly if no vnc client connected
vnc: sanitize bits_per_pixel from the client
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes for libcacard (usb smartcard emulation), xhci and uhci.
# gpg: Signature made Tue 28 Oct 2014 10:39:52 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20141028-1:
uhci: remove useless DEBUG
xhci: add property to turn on/off streams support
libcacard: don't free sign buffer while sign op is pending
libcacard: Lock NSS cert db when selecting an applet on an emulated card
libcacard: introduce new vcard_emul_logout
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix off-by-one error when unplugging disks, which would otherwise leave the last ATA disk plugged, with obvious consequences. Also rewrite loop to be more readable.
Signed-off-by: James Harper <james.harper@ejbdigital.com.au>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This adds synchronisation of the 6 vcpu registers (only 32bits of
them) that vmport.c needs between Xen and QEMU.
This is to avoid a 2nd and 3rd exchange between QEMU and Xen to
fetch and put these 6 vcpu registers used by the code in vmport.c
and vmmouse.c
The registers are passed in the new shared page provided by
HVM_PARAM_VMPORT_REGS_PFN.
Add new array to XenIOState that allows selection of current_cpu by
vcpu id.
Now pass XenIOState to handle_ioreq().
Add new routines regs_to_cpu(), regs_from_cpu(), and
handle_vmport_ioreq().
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.
# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
aio / timers: De-document -clock
hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
virtio-scsi: sense in virtio_scsi_command_complete
target-i386: add Intel AVX-512 support
get_maintainer.pl: restrict cases where it falls back to --git
get_maintainer.pl: move git loop under "if ($email) {"
qtest: fix qtest log fd should be initialized before qtest chardev
MAINTAINERS: avoid M entries that point to mailing lists
MAINTAINERS: add some tests directories
MAINTAINERS: Add more TCG files
MAINTAINERS: add myself for X86
MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
MAINTAINERS: grab more files from Anthony's pile
target-i386: warns users when CPU threads>1 for non-Intel CPUs
sysbus: Use TYPE_DEVICE GPIO functionality
qdev: gpio: Define qdev_pass_gpios()
qdev: gpio: Remove qdev_init_gpio_out x1 restriction
qdev: gpio: delete NamedGPIOList::out
irq: Remove qemu_irq_intercept_out
qtest/irq: Rework IRQ interception
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-rng backend is currently linked twice, once in the proxy
device (e.g. virtio-rng-pci) and once in virtio-rng-device. This causes
a double unref of the backend when the parent device is unplugged.
To fix this, make the proxy device use an alias, similar to what is
already being done for the iothread link.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1414577839-18695-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
graphic_hw_update and vnc_refresh_server_surface aren't
need to do when no vnc client connected. It can reduce
lock contention, because vnc_refresh will hold global big
lock two millisecond every three seconds.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.
To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.
This is CVE-2014-7815.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
[ kraxel: apply codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 50dcc0f8 (uhci: tracing support) had removed
DPRINTF, the DEBUG marco is useless now, remove it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
streams support in usb-redir and usb-host works only with recent enough
versions of the support libraries (libusbredir and libusbx). Failure
mode is rather unelegant: Any stream usb transfers will throw stall
errors. Turning off support for streams in the xhci host controller
will work better as the guest can figure beforehand that streams are
not going to work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
commit 57f97834ef cleaned up
the cac_applet_pki_process_apdu function to have a single
exit point. Unfortunately, that commit introduced a bug
where the sign buffer can get free'd and nullified while
it's still being used.
This commit corrects the bug by introducing a boolean to
track whether or not the sign buffer should be freed in
the function exit path.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Alon Levy <alon@pobox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When a process in a guest uses an emulated smartcard, libcacard running
on the host passes the PIN from the guest to the PK11_Authenticate NSS
function. The first time PK11_Authenticate is called the passed in PIN
is used to unlock the certificate database. Subsequent calls to
PK11_Authenticate will transparently succeed, regardless of the passed in
PIN. This is a convenience for applications provided by NSS.
Of course, the guest may have many applications using the one emulated
smart card all driven from the same host QEMU process. That means if a
user enters the right PIN in one program in the guest, and then enters the
wrong PIN in another program in the guest, the wrong PIN will still
successfully unlock the virtual smartcard.
This commit forces the NSS certificate database to be locked anytime an
applet is selected on an emulated smartcard by calling vcard_emul_logout.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-By: Robert Relyea <rrelyea@redhat.com>
Reviewed-By: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vcard_emul_reset currently only logs NSS out, but there is a TODO
for potentially sending insertion/removal events when powering down
or powering up.
For clarity, this commit moves the current guts of vcard_emul_reset to
a new vcard_emul_logout function which will never send insertion/removal
events. The vcard_emul_reset function now just calls vcard_emul_logout,
but also retains its TODO for watching power state transitions and sending
insertion/removal events.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-By: Robert Relyea <rrelyea@redhat.com>
Reviewed-By: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch vmsvga_update_rect over to use vmsvga_verify_rect. Slight change
in behavior: We don't try to automatically fixup rectangles any more.
In case we find invalid update requests we'll do a full-screen update
instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Quick & easy stopgap for CVE-2014-3689: We just compile out the
hardware acceleration functions which lack sanity checks. Thankfully
we have capability bits for them (SVGA_CAP_RECT_COPY and
SVGA_CAP_RECT_FILL), so guests should deal just fine, in theory.
Subsequent patches will add the missing checks and re-enable the
hardware acceleration emulation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Commit 6d32717 "aio / timers: Remove alarm timers" has issues:
1. It silently ignores -clock for backward compatibility.
Incompatible change: -clock help no longer terminates the program.
Tolerable.
2. Failed to update option documentation. In particular, -help still
advises users to try -clock help for available timers. Drop all
documentation on -clock.
3. The 'query-alarm-clock' example in docs/writing-commands.txt no
longer works, and needs to be redone. Can't do that right now, so I
just stick in a FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The local variable "type" in virtio_scsi_handle_ctl represents the tmf
command type from the guest and it has the same meaning as the
req->req.tmf.type. However, before the invoking of virtio_scsi_parse_req
the req->req.tmf.type doesn't has the correct value(just initialized to
zero). Therefore, we need to use the "type" variable to judge the case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Bin Wu <wu.wubin@huawei.com>
[Actually make it compile, "type" must be uint32_t in order to pass
it to virtio_tswap32s. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 15124e1420. It breaks
debuggability of qemu and is no longer needed as the problem has
now been addressed in a different way.
Instead we provide a comment about why these signals must be
handled asynchronously.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
[PMM: added comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_shutdown_requested may be interrupted by qemu_system_killed. If the
latter sets shutdown_requested after qemu_shutdown_requested has read it
but before it was cleared, the shutdown event is lost. Fix this by using
atomic_xchg.
This provides a different fix for the problem which commit 15124e142
attempts to deal with. That commit breaks use of ^C to drop into gdb,
and so this approach is better (and 15124e142 can be reverted).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target-arm queue:
* remove pointless 'info pcmcia' and a lot of now-dead code
* register ARM cpu reset handlers even if not using -kernel
* update to libvixl 1.6
* various minor code cleanups
* support PSCI under TCG ('virt' machine can now be shut down,
SMP configurations work)
* correct the sense of the AArch64 DCZID DZP bit
* report a valid L1Ip field in CTR_EL0 for CPU type "any"
* correctly UNDEF writes to FPINST/FPINST2 from EL0
* more preparatory code refactoring for EL2/EL3 support
# gpg: Signature made Fri 24 Oct 2014 12:35:52 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141024: (23 commits)
target-arm: A32: Emulate the SMC instruction
target-arm: make arm_current_el() return EL3
target-arm: rename arm_current_pl to arm_current_el
target-arm: reject switching to monitor mode
target-arm: add arm_is_secure() function
target-arm: increase arrays of registers R13 & R14
target-arm: correctly UNDEF writes to FPINST/FPINST2 from EL0
target-arm: Report a valid L1Ip field in CTR_EL0 for CPU type "any"
target-arm: Correct sense of the DCZID DZP bit
arm/virt: enable PSCI emulation support for system emulation
target-arm: add emulation of PSCI calls for system emulation
target-arm: Add support for A32 and T32 HVC and SMC insns
target-arm: Handle SMC/HVC undef-if-no-ELx in pre_* helpers
target-arm: add missing PSCI constants needed for PSCI emulation
target-arm: do not set do_interrupt handlers for ARM and AArch64 user modes
target-arm: add powered off cpu state
omap_gpmc.c: Remove duplicate assignment
disas/libvixl/a64/instructions-a64.h: Remove unused constants
arm_gic: remove unused parameter.
disas/libvixl: Update to libvixl 1.6
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DZP bit in the DCZID system register should be set if
the control bits which prohibit use of the DC ZVA instruction
have been set (it stands for Data Zero Prohibited). However
we had the sense of the test inverted; fix this so that the
bit reads correctly.
To avoid this regressing the behaviour of the user-mode
emulator, we must set the DZE bit in the SCTLR for that
config so that userspace continues to see DZP as zero (it
was getting the correct result by accident previously).
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1412959792-20708-1-git-send-email-peter.maydell@linaro.org
Add support for handling PSCI calls in system emulation. Both version
0.1 and 0.2 of the PSCI spec are supported. Platforms can enable support
by setting the "psci-conduit" QOM property on the cpus to SMC or HVC
emulation and having a PSCI binding in their dtb.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-7-git-send-email-peter.maydell@linaro.org
[PMM: made system reset/off PSCI functions power down the CPU so
we obey the PSCI API requirement never to return from them;
rearranged how the code is plumbed into the exception system,
so that we split "is this a valid call?" from "do the call"]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for HVC and SMC instructions to the A32 and
T32 decoder. Using these for real exceptions to EL2 or EL3
is currently not supported (the do_interrupt routine does
not handle them) but we require the instruction support to
implement PSCI.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-6-git-send-email-peter.maydell@linaro.org
SMC must UNDEF if EL3 is not implemented; similarly HVC UNDEFs
if EL2 is not implemented. Move the handling of this from
translate-a64.c into the pre_smc and pre_hvc helper functions.
This is necessary because use of these instructions for PSCI
takes precedence over this UNDEF case, and we can't tell if
this is a PSCI call until runtime.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-5-git-send-email-peter.maydell@linaro.org
The instructions-a64.h header defines a number of floating point
constants whose initializers are function calls. gcc 5 will warn
if these constants are not used by the C or C++ file which includes
the header, because they imply a runtime cost. Since for the files
QEMU uses from libvixl we don't use these constants at all, just
remove them.
Upstream intend to fix these by shifting to an 'extern const' in
the header plus definition in a suitable source file, so we can
drop this patch when we sync with the upcoming libvixl 1.7.
The related compiling error:
CXX disas/arm-a64.o
In file included from /upstream/qemu/disas/libvixl/a64/disasm-a64.h:32:0,
from disas/arm-a64.cc:20:
disas/libvixl/a64/instructions-a64.h:98:13: error: 'vixl::kFP32PositiveInfinity' defined but not used [-Werror=unused-variable]
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
^
disas/libvixl/a64/instructions-a64.h:99:13: error: 'vixl::kFP32NegativeInfinity' defined but not used [-Werror=unused-variable]
const float kFP32NegativeInfinity = rawbits_to_float(0xff800000);
^
disas/libvixl/a64/instructions-a64.h💯14: error: 'vixl::kFP64PositiveInfinity' defined but not used [-Werror=unused-variable]
const double kFP64PositiveInfinity =
^
disas/libvixl/a64/instructions-a64.h:102:14: error: 'vixl::kFP64NegativeInfinity' defined but not used [-Werror=unused-variable]
const double kFP64NegativeInfinity =
^
disas/libvixl/a64/instructions-a64.h:107:21: error: 'vixl::kFP64SignallingNaN' defined but not used [-Werror=unused-variable]
static const double kFP64SignallingNaN =
^
disas/libvixl/a64/instructions-a64.h:109:20: error: 'vixl::kFP32SignallingNaN' defined but not used [-Werror=unused-variable]
static const float kFP32SignallingNaN = rawbits_to_float(0x7f800001);
^
disas/libvixl/a64/instructions-a64.h:112:21: error: 'vixl::kFP64QuietNaN' defined but not used [-Werror=unused-variable]
static const double kFP64QuietNaN =
^
disas/libvixl/a64/instructions-a64.h:114:20: error: 'vixl::kFP32QuietNaN' defined but not used [-Werror=unused-variable]
static const float kFP32QuietNaN = rawbits_to_float(0x7fc00001);
^
disas/libvixl/a64/instructions-a64.h:117:21: error: 'vixl::kFP64DefaultNaN' defined but not used [-Werror=unused-variable]
static const double kFP64DefaultNaN =
^
disas/libvixl/a64/instructions-a64.h:119:20: error: 'vixl::kFP32DefaultNaN' defined but not used [-Werror=unused-variable]
static const float kFP32DefaultNaN = rawbits_to_float(0x7fc00000);
^
cc1plus: all warnings being treated as errors
make: *** [disas/arm-a64.o] Error 1
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
[PMM: Rewrote the commit message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the registering of CPU reset handlers to before the point where
we leave the function in the -bios (not -kernel) case, so CPU reset
works correctly with -bios as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check if the first cpu is an armv8 cpu, and if so, put
arm,armv8-timer in the compatible string list.
Note that due to this check, this patch moves the creation
of the timer fdt node to after the cpu creation loop.
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1411736960-24206-1-git-send-email-hw.claudio@gmail.com
[PMM: updated to list arm,armv8-timer first]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This command lists PCMCIA sockets and cards. Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.
Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity. Has never been used, because there has never been code
to eject a PCMCIA card.
Not worth fixing & converting to QMP. Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches
# gpg: Signature made Thu 23 Oct 2014 18:56:05 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (32 commits)
qemu-img: Print error if check failed
block: char devices on FreeBSD are not behind a pager
iotests: Add test for qcow2 L1 table update
qcow2: Do not overflow when writing an L1 sector
iotests: Add test for map commands
qemu-io: Respect early image end for map
block: Respect underlying file's EOF
docs/qcow2: Limit refcount_order to [0, 6]
docs/qcow2: Correct refcount_block_entries
qcow2: Drop REFCOUNT_SHIFT
iotests: Add test for potentially damaging repairs
iotests: Fix test outputs
qcow2: Clean up after refcount rebuild
qcow2: Rebuild refcount structure during check
qcow2: Do not perform potentially damaging repairs
qcow2: Fix refcount blocks beyond image end
qcow2: Reuse refcount table in calculate_refcounts()
qcow2: Let inc_refcounts() resize the reftable
qcow2: Let inc_refcounts() return -errno
qcow2: Split fail code in L1 and L2 checks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, if bdrv_check() fails either by returning -errno or having
check_errors set, qemu-img check just exits with 1 after having told the
user that there were no errors on the image. This is bad.
Instead of printing the check result if there were internal errors which
were so bad that bdrv_check() could not even complete with 0 as a return
value, qemu-img check should inform the user about the error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
QMP patches
# gpg: Signature made Thu 23 Oct 2014 16:05:52 BST using RSA key ID E24ED5A7
# gpg: Good signature from "Luiz Capitulino <lcapitulino@gmail.com>"
* remotes/qmp-unstable/tags/for-upstream:
monitor: delete device_del_bus_completion
monitor: add del completion for peripheral device
qdev: add qdev_build_hotpluggable_device_list helper
MAINTAINERS: add entry for qobject files
dump: Turn some functions to void to make code cleaner
dump: Propagate errors into qmp_dump_guest_memory()
virtio-balloon: Tweak recent fix for integer overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a new flag to mark devices that require requests to be aligned and
replace the usage of BDRV_O_NOCACHE and O_DIRECT with this flag when
appropriate.
If a character device is used as a backend on a FreeBSD host set this flag
unconditionally.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The list emitted by --git-fallback often leads inexperienced contributors
to add pointless CCs. While not discouraging usage of --git-fallback,
we want to:
1) disable the fallback if only some files lack a maintainer
$ scripts/get_maintainer.pl -f util/cutils.c hw/ide/core.c
Kevin Wolf <kwolf@redhat.com> (odd fixer:IDE)
Stefan Hajnoczi <stefanha@redhat.com> (odd fixer:IDE)
This behavior is taken even if --git-fallback is specified.
2) warn the contributors about what we're doing, asking them to use their
common sense:
$ scripts/get_maintainer.pl -f util/cutils.c
get_maintainer.pl: No maintainers found, printing recent contributors.
get_maintainer.pl: Do not blindly cc: them on patches! Use common sense.
Luiz Capitulino <lcapitulino@redhat.com> (commit_signer:1/2=50%)
...
$
Explicitly disabling the fallback will not result in the warning message:
$ scripts/get_maintainer.pl -f util/cutils.c --no-git-fallback
$ echo $?
0
(Returning 1 would break usage of scripts/get_maintainer.pl as a cccmd
for git-send-email).
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All checks in the loop are guarded by that condition, and there is a
handy "if" just below. Simplify the code.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qtest_log_fp should be inited before qemu_chr_add_handlers.
If not the log dumped from callback functions may be lost.
easy to reproduce it by command:
"QTEST_LOG=1 QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64
gtester -k --verbose -m=quick tests/qdev-monitor-test"
The log "[I xxxxxx] OPENED" should be printed out by
qtest_event, but does not.
Signed-off-by: Li Liu <john.liuli@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"L" entries that point to qemu-devel are not much better either, but at least
the get_maintainer.pl output is clearer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately, TCG files do not really have a maintainer yet.
But at least there will be fewer unmaintained files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Still not moving it beyond "Odd fixes". Richard Henderson also has
reviewed a bunch of X86 TCG patches, so add him as well. All we want
is to avoid that patches fall on the floor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
He wrote "I've written mostly all of usb-serial.c and baum.c, and keep
maintaining them, since I use them regularly."
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only Intel CPUs support hyperthreading. When users select threads>1 in
-smp option, QEMU fixes it by adjusting CPUID_0000_0001_EBX and
CPUID_8000_0008_ECX based on inputs (sockets, cores, threads);
so guest VM can boot correctly. However it is still better to gives
users a warning when such case happens.
Signed-off-by: Wei Huang <wei@redhat.com>
[As suggested by Eduardo, check for !IS_INTEL instead of AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-implement the Sysbus GPIOs to use the existing TYPE_DEVICE
GPIO named framework. A constant string name is chosen to avoid
conflicts with existing unnamed GPIOs.
This unifies GPIOs are IRQs for sysbus devices and allows removal
of all Sysbus state for GPIOs.
Any existing and future-added functionality for GPIOs is now
also available for sysbus IRQs.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allows a container to take ownership of GPIOs in a contained
device and automatically connect them as GPIOs to the container.
This prepares for deprecation of the SYSBUS IRQ functionality, which
has this feature. We push it up to the device level instead of sysbus
level. There's nothing sysbus specific about passing GPIOs to
containers so its a legitimate device-level generic feature.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously this was restricted to a single call per-dev/per-name. With
the conversion of the GPIO output state to QOM the implementation can
now handle repeated calls. Remove the restriction.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All users of GPIO outputs are fully QOMified, using QOM properties to
access the GPIO data. Delete.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the qtest intercept handler to accept just the individual IRQ
being intercepted as opaque. n is still expected to be correctly set
as for the original intercepted irq. qemu_intercept_irq_in is updated
accordingly.
Then covert the qemu_irq_intercept_out call to use qdev intercept
version. This stops qtest from having to mess with the raw IRQ pointers
(still has to mess with names and counts but a step in the right
direction).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To replace the old qemu_irq intercept API (which had users reaching
into qdev private state for GPIOs).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-implement as a link setter. This should allow the QOM framework to
keep track of ref counts properly etc.
We need to add a default parent for the connecting input incase it's
coming from a non-qdev source. We simply parent the IRQ to the machine
in this case.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than an abort(). This allows callers to decide whether parenting
an already-parented object is a fatal error condition.
Useful for providing a default value for an object's parent in the case
where you want to set one iff it doesn't already have one.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By passing in "" to object_property_set_link.
The lead user of this is the QDEV GPIO framework which will implement
GPIO disconnects via an "unlink". GPIO disconnection is used by
qtest's irq_intercept_out command.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no use to constantly trying to enable dataplane if we failed
to set up guest or host notifiers, so fence it off in that case.
We'll try again if the device is reinitialized.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dataplane code is currently doing a hard exit on various setup
failures. In practice, this may mean that a guest suddenly dies after
a dataplane device failed to come up (e.g., when a file descriptor
limit is hit for the nth device).
Let's just try to unwind the setup instead and return.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setting up guest or host notifiers may fail, but the user will have
no idea why: Let's print the error returned by the callback.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need this to protect dataplane thread from race conditions with block
jobs until the latter is made dataplane-safe.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Updating the L1 table should not result in random data being written.
This adds a test for that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While writing an L1 table sector, qcow2_write_l1_entry() copies the
respective range from s->l1_table to the local "buf" array. The size of
s->l1_table does not have to be a multiple of L1_ENTRIES_PER_SECTOR;
thus, limit the index which is used for copying all entries to the L1
size.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for qemu-img map and qemu-io -c map on truncated files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated() may report zero clusters which most probably means
the image (file) is shorter than expected. Respect this case in order to
avoid an infinite loop.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When falling through to the underlying file in
bdrv_co_get_block_status(), if it returns that the query offset is
beyond the file end (by setting *pnum to 0), return the range to be
zero and do not let the number of sectors for which information could be
obtained be overwritten.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specify the upper limit of refcount_order to be 6 (that is,
refcount_bits = 64). Any larger value does not make much sense when all
offsets, sizes, cluster counts etc. "only" have a width of 64 bit as
well, and very large values would be very difficult to support.
Therefore, just cap it at the largest reasonable value.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A refblock entry may have a different size than 16 bits, it may even be
smaller than a byte. Correct the refcount_block_entries calculation
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With BDRVQcowState.refcount_block_bits, we don't need REFCOUNT_SHIFT
anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are certain cases where repairing a qcow2 image might actually
damage it further (or rather, where repairing it has in fact damaged it
further with the old qcow2 check implementation). This should not
happen, so add a test for these cases.
Furthermore, the repair function now repairs refblocks beyond the image
end by resizing the image accordingly. Add several tests for this as
well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
039, 060 and 061 all create images with referenced clusters having a
refcount of 0. Because previous commits changed handling of such errors,
these tests now have a different output. Fix it.
Furthermore, 060 created a refblock with a refcount greater than one
which now results in having to rebuild the refcount structure as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the old refcount structure will be leaked after having rebuilt
it, we need to recalculate the refcounts and run a leak-fixing operation
afterwards (if leaks should be fixed at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit introduced the "rebuild" variable to qcow2's
implementation of the image consistency check. Now make use of this by
adding a function which creates a completely new refcount structure
based solely on the in-memory information gathered before.
The old refcount structure will be leaked, however. This leak will be
dealt with in a follow-up commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a referenced cluster has a refcount of 0, increasing its refcount may
result in clusters being allocated for the refcount structures. This may
overwrite the referenced cluster, therefore we cannot simply increase
the refcount then.
In such cases, we can either try to replicate all the refcount
operations solely for the check operation, basing the allocations on the
in-memory refcount table; or we can simply rebuild the whole refcount
structure based on the in-memory refcount table. Since the latter will
be much easier, do that.
To prepare for this, introduce a "rebuild" boolean which should be set
to true whenever a fix is rather dangerous or too complicated using the
current refcount structures. Another example for this is refcount blocks
being referenced more than once.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the qcow2 check function detects a refcount block located beyond the
image end, grow the image appropriately. This cannot break anything and
is the logical fix for such a case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the refcount table can be passed around by reference, do that
for inc_refcounts() (and subsequently check_refcounts_l1() and
check_refcounts_l2()) and use it for resizing it when a cluster after
the image end is encountered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of a future patch, inc_refcounts() will have to throw errors which
are generally signaled by returning -errno. Therefore, let it return an
integer which is either 0 for success or -errno and handle the -errno
case in all callers.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of printing out an error message, incrementing check_errors and
returning a fixed -errno, just do cleanups and return -ret, with ret set
by the code which threw the exception (jumped to the fail label).
Also, increment check_errors on error in check_refcounts_l2().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use int64_t for the entry count of the in-memory refcount table
throughout the check functions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When implementing variable refcounts, we want to be able to easily find
all the places in qemu which are tied to a certain refcount order.
Replace sizeof(uint16_t) in the check code by sizeof(**refcount_table)
so we can later find it more easily.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put the code for calculating the reference counts and comparing them
during qemu-img check into own functions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size of a refblock entry is (in theory) variable; calculate
therefore the number of entries per refblock and the according bit shift
(1 << x == entry count) when opening an image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions call their non-0-counterparts and then fill the
allocated buffer with 0 (if the allocation has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to possible automatic regression and performance
testing for the block layer I found that the iotests don't work
for all protocols anymore.
In commit 1f7bf7d0 I started to change supported protocols from
generic to file for various tests. Unfortunately, some tests
added in the meantime again carry generic protocol altough they
can only work with file because they require local file access.
The other way around for some tests that only support file I added
NFS protocol after confirming they work.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AioContext falls under the block layer, mark it as such.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Functions shouldn't return an error code and an Error object at the same time.
Turn all these functions that returning Error object to void.
We also judge if a function success or fail by reference to the local_err.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The code calls dump_error() on error, and even passes it a suitable
message. However, the message is thrown away, and its callers pass
up only success/failure. All qmp_dump_guest_memory() can do is set
a generic error.
Propagate the errors properly, so qmp_dump_guest_memory() can return
a more useful error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 1f9296b avoids "other kinds of overflow" by limiting the
polling interval to UINT_MAX. The computations to protect are done in
64 bits. This is indeed safe when unsigned is 32 bits, as it commonly
is. It isn't when unsigned is 64 bits. Purely theoretical; I'm not
aware of such a system. Limit it to UINT32_MAX instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qga: remove readdir_r usage and fix use-after-free
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# gpg: Signature made Wed 22 Oct 2014 13:56:19 BST using RSA key ID F108B584
# gpg: Can't check signature: public key not found
* remotes/mdroth/tags/qga-pull-2014-10-22-tag:
qga: Rewrite code where using readdir_r
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TriCore ABS, ABSB, B, BIT, BO instructions added
# gpg: Signature made Tue 21 Oct 2014 17:47:32 BST using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
* remotes/bkoppelmann/tags/pull-tricore-20141021:
target-tricore: Add instructions of BO opcode format
target-tricore: Add instructions of BIT opcode format
target-tricore: Add instructions of B opcode format
target-tricore: Add instructions of ABS, ABSB opcode format
target-tricore: Cleanup and Bugfixes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches
# gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make device model's references to BlockBackend strong
block: Lift device model API into BlockBackend
blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend
block/qapi: Convert qmp_query_block() to BlockBackend
blockdev: Fix blockdev-add not to create DriveInfo
blockdev: Drop superfluous DriveInfo member id
pc87312: Drop unused members of PC87312State
ide: Complete conversion from BlockDriverState to BlockBackend
hw: Convert from BlockDriverState to BlockBackend, mostly
virtio-blk: Rename VirtIOBlkConf variables to conf
virtio-blk: Drop redundant VirtIOBlock member conf
block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
block: Rename BlockDriverAIOCB* to BlockAIOCB*
block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
block: Merge BlockBackend and BlockDriverState name spaces
block: Eliminate BlockDriverState member device_name[]
block: Eliminate bdrv_iterate(), use bdrv_next()
blockdev: Eliminate drive_del()
block: Make BlockBackend own its BlockDriverState
block: Code motion to get rid of stubs/blockdev.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qxl: keep going if reaching guest bug on empty area
# gpg: Signature made Wed 15 Oct 2014 11:45:37 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-20141015-1:
qxl: keep going if reaching guest bug on empty area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function g_assert_cmpint() is not in glib 2.12, which is our current
minimum requirement. Rephrase the recently added assertion to avoid it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Several s390x/kvm/ccw related files don't have an entry in MAINTAINERS:
Sort them into the appropriate sections.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Much more command code needs conversion. I'm converting these now
because they're using bdrv_dev_* functions, which I'm about to lift
into BlockBackend.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Much more command code needs conversion. I start with this one
because it's using bdrv_dev_* functions, which I'm about to lift into
BlockBackend.
While there, give bdrv_query_info() internal linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a BlockBackend member to TrimAIOCB, so ide_issue_trim_cb() can use
blk_aio_discard() instead of bdrv_aio_discard().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is consistent with how VirtIOFOOConf variables are named
elsewhere, and makes blk available for BlockBackend variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockBackend's name space is separate only to keep the initial patches
simple. Time to merge the two.
Retain bdrv_find() and bdrv_get_device_name() for now, to keep this
series manageable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_del() has become a trivial wrapper around blk_unref(). Get rid
of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On BlockBackend destruction, unref its BlockDriverState. Replaces the
callers' unrefs.
This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref(). The
back-pointer remains weak.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the BlockBackend own the DriveInfo. Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Export names may be used with nbd+unix, too, fix nbd_refresh_filename()
accordingly. Also, for nbd+tcp, the documented path schema is
"nbd://host[:port]/export", so use it. Furthermore, as can be seen from
that schema, the port is optional.
That makes six single cases for how the filename can be formatted; it is
not easy to generalize these cases without the resulting statement being
completely unreadable, thus there is simply one snprintf() per case.
Finally, taking the options from BDRVNBDState::socket_opts is wrong,
because those will not contain the export name. Just use
BlockDriverState::options instead.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the Qcow2DiscardRegion is adjacent to another one referenced by "d",
free this Qcow2DiscardRegion metadata referenced by "p" after
it was removed from s->discards queue.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add instructions of BO opcode format.
Add microcode generator functions gen_swap, gen_ldmst.
Add microcode generator functions gen_st/ld_preincr, which write back the address after the memory access.
Add helper for circular and bit reverse addr mode calculation.
Add sign extended bitmask for BO_OFF10 field.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add instructions of BIT opcode format.
Add microcode generator functions gen_bit_1/2op to do 1/2 bit operations on the last bit.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add instructions of ABS, ABSB opcode format.
Add microcode generator functions for ld/st of two 32bit reg as one 64bit value.
Add microcode generator functions for ldmst and swap.
Add helper ldlcx, lducx, stlcx and stucx.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Move FCX loading of save_context_ to caller functions, for STLCX, STUCX insn to use those functions.
Move FCX storing of restore_context_ to caller functions, for LDLCX, LDUCX insn to use those functions.
Remove do_raise_exception function, which caused clang to emit a warning.
Fix: save_context_lower now saves a[11] instead of PSW.
Fix: MASK_OP_ABSB_BPOS starting at wrong offset.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.
* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
bootindex: change fprintf to error_report
bootindex: delete bootindex when device is removed
bootindex: move calling add_boot_device_patch to bootindex setter function
ide: add calling add_boot_device_patch in bootindex setter function
nvma: ide: add bootindex to qom property
usb-storage: add bootindex to qom property
virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
block: remove bootindex property from qdev to qom
virtio-blk: add bootindex to qom property
ide: add bootindex to qom property
scsi: add bootindex to qom property
isa-fdc: remove bootindexA/B property from qdev to qom
redirect: remove bootindex property from qdev to qom
vfio: remove bootindex property from qdev to qom
pci-assign: remove bootindex property from qdev to qom
host-libusb: remove bootindex property from qdev to qom
virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
net: remove bootindex property from qdev to qom
usb-net: add bootindex to qom property
vmxnet3: add bootindex to qom property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes compilation errors when building against glib <2.28.0
due to the missing g_get_monotonic_time() function.
The compilation error in tests/libqos/virtio.c was introduced in commit
70556264a8 ("libqos: use microseconds
instead of iterations for virtio timeout").
Add a simple g_get_monotonic_time() implementation to glib-compat.h
based on code from vhost-user-test.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
migration/next for 20141015
# gpg: Signature made Wed 15 Oct 2014 09:21:54 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20141015:
migration: catch unknown flag combinations in ram_load
qemu-file: Move stdio implementation to qemu-file-stdio.c
qemu-file: Move unix and socket implementations to qemu-file-unix.c
qemu-file: Use qemu_file_is_writable() on stdio_fclose()
qemu-file: Make qemu_file_is_writable() non-static
qemu-file: Add copyright header to qemu-file.c
vmstate: Allow dynamic allocation for VBUFFER during migration
block/migration: Disable cache invalidate for incoming migration
Tests: QEMUSizedBuffer/QEMUBuffer
QEMUSizedBuffer based QEMUFile
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Other packages may provide includes for pixman as well if the host has a
devel package installed. So add ours to the front to unsure that the
right version is used.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Following cleanup of the vga device code in commit d2e043a804,
the arrays dmask4 and dmask16 are now unused. gcc doesn't warn
about this, but clang does; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qemu extented register range to the standard vga mmio bar.
Right nowe there are two registers: One readonly register returning the
size of the region (so we can easily add more registers there if needed)
and one endian control register, so guests (especially ppc) can flip
the framebuffer endianness as they need it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Xorg server hangs when using xfig and typing a text with space:
#0 qxl_wait_for_io_command (qxl=<value optimized out>) at qxl_io.c:47
#1 0x00007f826a49a299 in qxl_download_box (surface=0x221d030, x1=231, y1=259,
x2=<value optimized out>, y2=<value optimized out>) at qxl_surface.c:143
while (!(ram_header->int_pending & QXL_INTERRUPT_IO_CMD))
usleep (1);
The QXL driver is calling QXL_IO_UPDATE_AREA with an empty area. This
is a guest bug. The call is async and no ack is sent back on guest
bug, so the X server will hang. The driver should be improved to avoid
this situation and also to abort on QXL_INTERRUPT_ERROR. This will be
a different patch series for the driver. However, it is simple enough
to keep qemu running on empty areas update, which is what this patch
provides.
https://bugzilla.redhat.com/show_bug.cgi?id=1151363
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Special handing of the Pause key. Implemented in a similar way as in
ui/sdl.c.
Signed-off-by: Martin Decky <martin@decky.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this memory leak is introduced by the original
commit 3158a3482b
valgrind out showing:
==14553== 21,459 (72 direct, 21,387 indirect) bytes in 1 blocks are definitely
lost in loss record 8,055 of 8,082
==14553== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==14553== by 0x80DBFBC: XkbGetKeyboardByName (in /usr/lib64/libX11.so.6.3.0)
==14553== by 0x40C704: gtk_display_init (gtk.c:1798)
==14553== by 0x1AEDC1: main (vl.c:4480)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function may be called by qmp command, we should
report error message to the caller.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On this way, we can assure the new bootindex take effect
during vm rebooting. Meanwhile set the initial value of
bootindex to -1.
Because ide devcies's unit property maybe
do not initialize when set_bootindex function is called,
so that we don't know its suffix. So we have to save the
call add_boot_device_path() on ide realize/init function.
When we want to change bootindex during vm rebooting, we
can call it in setter function.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At present, nvma cannot boot. However, it provides already
a bootindex property, so change bootindex to qom for nvma
device, but not call add_boot_device_path.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Because usb-storage rely on scsi-disk which is created
in usb_msg_realize_storage(), so we should store the SCSIDevice
pointer in MSDState struct. Only in this way, we can change
the global boot_order_list when we want to change the bootindex
during vm rebooting by calling object_property_set_int(Object(SCSIDevice),).
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindexA/B form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-net-pci, as well as CCW and
s390-virtio.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
At present, isa_ne2000 device does not support to boot
os, so we register two seprate qom getter/setter functions.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
when we remove bootindex form qdev.property to qom.property,
we can use those functions set/get bootindex property for all
correlative devices. Meanwhile set the initial value of
bootindex to -1.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the function of updating bootindex about fw_boot_order list
in add_boot_device_path(). We should delete the old one if a
device has existed in global fw_boot_order list.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We must assure that the changed bootindex can take effect
when guest is rebooted. So we introduce fw_cfg_machine_reset(),
which change the fw_cfg file's bootindex data using the new
global fw_boot_order list.
Signed-off-by: Chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce del_boot_device_path() to clean up fw_cfg content when
hot-unplugging a device that refers to a bootindex or update a
existent devcie's bootindex.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Chenliang <chenliang88@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QOM infrastructure fixes and device conversions
* GPIO conversion to QOM, continued
* Device property description support
* QTest cases for hotplug
* Hotplug handler conversion
# gpg: Signature made Wed 15 Oct 2014 04:05:17 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (47 commits)
qdev: Drop legacy_name from qdev properties
qmp: Print descriptions of object properties
qdev: Set the object property's description to the qdev property's.
qom: Add description field in ObjectProperty struct
qdev: Add description field in PropertyInfo struct
qdev: device_del: Search for to be unplugged device in 'peripheral' container
qdev: HotplugHandler: Add support for unplugging BUS-less devices
qdev: Drop legacy hotplug fields/methods
usb: Convert usb devices to hotplug handler API
usb: Convert usb-ccid to hotplug handler API
usb-storage: Drop not needed "allow_hotplug = 0"
usb-bot: Drop not needed "allow_hotplug = 0"
usb-bot: Mark device as non hotpluggable
scsi: Cleanup not used anymore SCSIBusInfo{hotplug, hot_unplug} fields
scsi: Convert virtio-scsi HBA to hotplug handler API
scsi: Convert pvscsi HBA to hotplug handler API
scsi: Set SCSI BUS itself as default HotplugHandler
s390x: Convert virtio-ccw to hotplug handler API
s390x: Convert s390-virtio to hotplug handler API
s390x: Drop not used allow_hotplug in event-facility
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new "description" field to DevicePropertyInfo.
The descriptions can serve as documentation in the code,
and they can be used to provide better help. For example:
$./qemu-system-x86_64 -device virtio-blk-pci,?
Before this patch:
virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool
virtio-blk-pci.scsi=bool
virtio-blk-pci.config-wce=bool
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16
virtio-blk-pci.logical_block_size=uint16
virtio-blk-pci.drive=str
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=on/off
virtio-blk-pci.multifunction=on/off
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=pci-devfn
virtio-blk-pci.event_idx=on/off
virtio-blk-pci.indirect_desc=on/off
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=on/off
virtio-blk-pci.class=uint32
After:
virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool (on/off)
virtio-blk-pci.scsi=bool (on/off)
virtio-blk-pci.config-wce=bool (on/off)
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.drive=str (ID of a drive to use as a backend)
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=bool (on/off)
virtio-blk-pci.multifunction=bool (on/off)
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06)
virtio-blk-pci.event_idx=bool (on/off)
virtio-blk-pci.indirect_desc=bool (on/off)
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=bool (on/off)
virtio-blk-pci.class=uint32
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The descriptions can serve as documentation in the code,
and they can be used to provide better help.
Copy property descriptions when copying alias properties.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
device_add puts every device with 'id' inside of 'peripheral'
container using id's value as the last component name.
Use it by replacing recursive search on sysbus with path
lookup in 'peripheral' container, which could handle both
BUS and BUS-less device cases.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It removes not needed anymore BusState::allow_hotplug field and
DeviceClass::unplug callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop useless hack that disables hotplug on bus, after backend
storage was added to it, by setting "allow_hotplug = 0". Even
if bus is hotpluggable, it won't be possible to add another
SCSI device to bus since its realize will fail early with
error "no free target" in scsi_qdev_realize() method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop useless hack that disables hotplug on bus by setting
"allow_hotplug = 0". Even if bus is hotpluggable, It won't
be possible to add another SCSI device to bus since its
realization will fail early with error "no free target"
in scsi_qdev_realize() method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
usb-bot creates SCSI bus and immediately makes it
non hotpluggable which was making not possible to
hotplug usb-bot since QEMU would abort at
bus_add_child(scsi-hd) time when usb-bot is
realized.
Mark usb-bot as not hotpluggable so that attempt
to hotplug it would error out even before it gets
to device initialization point.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
SCSI subsytem was converted to hotplug handler API and
doesn't use SCSIBusInfo{hotplug, hot_unplug} fields and
related callbacks anymore.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
That would allow to handle SCSI device unplug
on HBAs without dedicated hot(un)plug handlers
and avoid making such HBAs explicitly hotpluggable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
s390-sclp-event-facility creates s390-sclp-events-bus
and immediately sets its allow_hotplug field to 0,
which is NOP since it's already 0 by default.
Also since BUS is not hotpluggable, it's not possible
to call SCLP_EVENT{ DeviceClass::unplug } callback
from qdev_unplug() making this unreachable code,
so drop it as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Bus by default is not hotpluggable.
virtio-mmio-bus and its parent types do not set allow_hotplug
anywhere explicitly, so remove not needed field access
and wrapper along with it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
virtio-pci-bus is an internal object of composite
virtio-pci device and it doesn't participate in
-device/device_add hotplug flow, and since it's
not required by bus_add_child() that BUS must
be hotpluggable to be able to add child at runtime,
it's possible to drop not needed 'allow_hotplug'
field.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since bus_add_child() no longer cares if BUS is hotpluggable
or not, there is no need in setting allow_hotplug field.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Check is too restrictive and does not allow
to add children to just created bus during hotplug
when the bus is part of composite device.
Removing check from bus_add_child() doesn't affect
devices creatable with device_add/del commands since
they have a similar builtin check and patch will
allow to create complex composite devices during
hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used for conversion of SCSI and USB devices,
and would allow to make every HBA/USB host switch
to HotplugHandler API without touching each controller
explicitly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will be used in shallow conversion from legacy hotplug
mechanism and eventually replace all the uses of old mechanism
DeviceClass::unplug = qdev_simple_unplug_cb()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
to be called for synchronously removable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will allow explicitly mark device as not hotpluggable and
avoid its creation with following error at realize time
and destroying it afterwards anyway. Instead of it will
error out even before instance of device is created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It would allow to transparently switch detection whether Bus
is hotpluggable from allow_hotplug field to hotplug_handler
link and to drop allow_hotplug field once all users are
converted to hotplug handler API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
checks that it's possible to hotplug usb-uas HBA and
then if it's possible to hot(un)plug scsi-disk to it.
Thest basically covers hot(un)plug on dummy HBAs
without means of hot(un)plug notification of the guest.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
usb-storage is different from usual usb devices
in that it uses a child SCSI bus for underlying storage.
This commit verifies that the SCSI bus is hotpluggable, as
hotplug operation wouldn't succeed without it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code necessary for testing uhci port into library
so it could be used by other USB tests.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
object_property_add_alias() is called at some
places at present. And its parameter errp may not NULL,
such as
object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev),"iothread",
&error_abort);
This patch add error handler for security.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Avoid the caller of object_property_print() leaking string
argument's memory, such as qdev_print_props() when
encounter errors.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove the functions gen_load_ACX and gen_store_ACX, which appear to have
been unused since they were first introduced many years ago. These functions
were the only places using the cpu_ACX[] array of TCG globals, so remove
that and its accompanying regnames_ACX[] as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add ifdef TARGET_MIPS64 guards around various functions that are only
called from helpers for TARGET_MIPS64 CPUs; this avoids compiler
warnings when building other configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The function check_mips64() is only used if TARGET_MIPS64 is defined;
add an ifdef guard to its definition to avoid warnings about it being
unused in other configurations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The do_lbu() function defined by the expansion of HELPER_LD() is
never used, so don't define it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Commit 240ce26a broke MIPS16 and microMIPS support as it didn't
care those branches and jumps don't have delay slot in
MIPS16 and microMIPS.
This patch introduces a new argument delayslot_size to the
gen_compute_branch() indicating size of delay slot {0, 2, 4}.
And the information is used to call handle_delay_slot() forcingly
when no delay slot is required.
There are some microMIPS branch and jump instructions that requires
exact size of instruction in the delay slot. For indicating
these instructions, MIPS_HFLAG_BDS_STRICT flag is introduced.
Those fictional branch opcodes defined to support MIPS16 and
microMIPS are no longer needed.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Jonas Gorski <jogo@openwrt.org>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
[leon.alrae@imgtec.com: cosmetic changes]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Update OPC_SYNCI with BS_STOP, in order to handle the instructions which saved
in the same TB of the store instruction.
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com: update microMIPS SYNCI as well]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
JR has been removed in R6 and now this instruction will cause Reserved
Instruction Exception. Therefore use JALR with rd=0 which is equivalent to JR.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Status.FR bit must be ignored on write and read as 1 when an implementation of
Release 6 of the Architecture in which a 64-bit floating point unit is
implemented.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced
MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions.
In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant
i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been
updated yet.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add abs argument to the existing softfloat minmax() function and define
new float{32,64}_{min,max}nummag functions.
minnummag(x,y) returns x if |x| < |y|,
returns y if |y| < |x|,
otherwise minnum(x,y)
maxnummag(x,y) returns x if |x| > |y|,
returns y if |y| > |x|,
otherwise maxnum(x,y)
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
this patch extends commit db80fac by not only checking
for unknown flags, but also filtering out unknown flag
combinations.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Separate the QEMUFile interface from the stdio-specific implementation,
to reduce dependencies from code using QEMUFile.
The code that is being moved is similar to the one that was on savevm.c before
it was moved in commit 093c455a8c, except for
some changes done by Markus, Juan, and myself. So, I am using the copyright and
license header from savevm.c, but CCing Juan and Markus so they can review the
copyright/license header.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Separate the QEMUFile interface from the implementation, to reduce
dependencies from code using QEMUFile.
All the code that is being moved to the new file is exactly the same
code that was on savevm.c (moved by commit
093c455a8c), so I am using the copyright
and license header from savevm.c for the new file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Use the existing function which checks if writev_buffer() or
put_buffer() are set, instead of duplicating it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMUFileStdio code will use qemu_file_is_writable() and will be
moved to a separate file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The person who created qemu-file.c (me, on commit
093c455a8c) didn't add a copyright/license
header to the file, even though the whole code was copied from savevm.c
(which had a copyright/license header).
To correct this, copy the copyright information and license from
savevm.c, that's where the original code came from.
Luckily, very few changes were made on qemu-file.c after it was created.
All the authors who touched the code are being CCed, so they can confirm
if they are OK with the copyright/license information being added.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This extends use of VMS_ALLOC flag from arrays to VBUFFER as well.
This defines VMSTATE_VBUFFER_ALLOC_UINT32 which makes use of VMS_ALLOC
and uses uint32_t type for a size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When migrated using libvirt with "--copy-storage-all", at the end of
migration there is race between NBD mirroring task trying to do flush
and migration completion, both end up invalidating cache. Since qcow2
driver does not handle this situation very well, random crashes happen.
This disables the BDRV_O_INCOMING flag for the block device being migrated
once the cache has been invalidated.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
--
fixed parens by hand
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify some of tests/test-vmstate.c to use the in memory file based
on QEMUSizedBuffer to provide basic testing of QEMUSizedBuffer and
the associated memory backed QEMUFile type.
Only some of the tests are changed so that the fd backed QEMUFile is
still tested.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Within the object that contains the GPIO output. This allows for
connecting GPIO outputs via setting of a Link property.
Also clear the link value to zero. This catch-alls the case
where a device improperly inits a gpio_out (malloc instead of
malloc0).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To the device that contains them. This will allow for referencing
a GPIO input from it's canonical path (exciting for dynamic machine
generation!)
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Only allow a GPIO name to be one or the other. Inputs and outputs are
functionally different and should be in different namespaces. Prepares
support for the QOMification of IRQs as Links or Child objects.
The alternative is to munge names .e.g. with "-in" or "-out" suffixes
when giving QOM names. But that reduces clarity and if there are cases
out there where users want I and O with same name they can manually add
their own suffixes.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot -
they have forbidden slot instead. However, current implementation does not
support forbidden slot yet.
Add also BC1EQZ and BC1NEZ instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
In R6 the special behaviour for data references is also specified for Kernel
and Supervisor mode. Therefore MIPS_HFLAG_UX is replaced by generic
MIPS_HFLAG_AWRAP indicating enabled 32-bit address wrapping.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping
with MIPS32R6 SDBBP.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Use "R6_" prefix in front of all new Multiply / Divide instructions for
easier differentiation between R6 and preR6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6.
Additionally, the hint codes in PREF instruction greater than or
equal to 24 generate Reserved Instruction Exception.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Move DSP and Loongson instruction to *_legacy functions as they have been
removed in R6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
For better code readability and to avoid 'if' statements for all R6 and preR6
instructions whose opcodes are the same - decode_opc_special* functions are
split into functions with _r6 and _legacy suffixes.
*_r6 functions will contain instructions which were introduced in R6.
*_legacy functions will contain instructions which were removed in R6.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Creating separate decode functions for special, special2 and special3
instructions to ease adding new R6 instructions and removing legacy
instructions.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signal Reserved Instruction Exception on instructions that do not exist in R6.
In this commit the following groups of preR6 instructions are marked as deleted:
- Floating Point Paired Single
- Floating Point Compare
- conditional moves / branches on FPU conditions
- branch likelies
- unaligned loads / stores
- traps
- legacy accumulator instructions
- COP1X
- MIPS-3D
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
various s390x updates:
- cpu state handling in qemu and migration
- vhost-scsi-ccw bugfix
# gpg: Signature made Fri 10 Oct 2014 14:01:34 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20141010:
s390x/virtio-ccw: fix vhost-scsi intialization
s390x/migration: migrate CPU state
s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESET
s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefs
s390x/kvm: propagate s390 cpu state to kvm
s390x/kvm: proper use of the cpu states OPERATING and STOPPED
s390x/kvm: introduce proper states for s390 cpus
linux-headers: update to 3.17-rc7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As usual, SLES11's GCC complained about double typedefs:
/home/cohuck/git/qemu/kvm-all.c:110: error: redefinition of typedef ‘KVMState’
/home/cohuck/git/qemu/include/sysemu/kvm.h:161: error: previous declaration of ‘KVMState’ was here
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vhost-scsi-ccw backend is of type VHostSCSICcw, not VirtIOSCSICcw.
This fixes a segfault when invoking
qemu-system-s390x -device vhost-scsi-ccw,?
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to synchronize registers after a reset has been performed. The
current code does that in qemu_system_reset(), load_normal_reset() and
modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET,
this needs to be done for the targeted vcpu as well, so let's call
cpu_synchronize_post_reset() in the respective handlers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and
CONFIG_USER_ONLY ifdefs in cpu.c.
In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a
dummy implementation - the two definitions are moved to the proper section in
cpu.h.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.
The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).
Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).
A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Until now, when a s390 cpu was stopped or halted, the number of running
CPUs was tracked in a global variable. This was problematic for migration,
so Jason came up with a per-cpu running state.
As it turns out, we want to track the full logical state of a target vcpu,
so we need real s390 cpu states.
This patch is based on an initial patch by Jason Herne, but was heavily
rewritten when adding the cpu states STOPPED and OPERATING. On the way we
move add_del_running to cpu.c (the declaration is already in cpu.h) and
modify the users where appropriate.
Please note that the cpu is still set to be stopped when it is
halted, which is wrong. This will be fixed in the next patch. The LOAD and
CHECK-STOP state will not be used in the first step.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
[folded Jason's patch into David's patch to avoid add/remove same lines]
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If reconnect was set, errors wouldn't always be reported.
Fix that and also only report a connect error once until a
connection has been made.
The primary purpose of this is to tell the user that a
connection failed so they can know they need to figure out
what went wrong. So we don't want to spew too much
out here, just enough so they know.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_req_continue can complete the request and cause the VirtIOSCSIReq
to be freed. Fetch req->sreq just once to avoid the bug.
Reported-by: Richard Jones <rjones@redhat.com>
Tested-by: Richard Jones <rjones@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even though hw/i386/pc.c tries to compute a valid loading address for the
initrd, close to the top of RAM, this does not take into account other
data that is malloced into that memory by SeaBIOS.
Luckily we can easily look at the memory map to find out how much memory is
used up there. This patch places the initrd in the first four gigabytes,
below the first hole (as returned by INT 15h, AX=e801h).
Without this patch:
[ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[ 0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff]
With this patch:
[ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[ 0.000000] RAMDISK: [mem 0x07112000-0x07fdffff]
So linuxboot is able to use the 64k that were added as padding for
QEMU <= 2.1.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we create an accel object before calling machine_init, we can
simply use the accel object to save all KVMState data, instead of
allocationg KVMState manually.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create an actual TYPE_ACCEL object when initializing a machine. This
will allow accelerator classes to implement some initialization on
instance_init, and to save state on the TYPE_ACCEL object.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
linux-user pull for 2.2
Clearest linux-user patches sent to the list since august,
Apart from Mikhails patch, the rest are quite trivial.
v2: check for CONFIG_TIMERFD only after it has been defined
# gpg: Signature made Mon 06 Oct 2014 20:08:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20141006-2:
translate-all.c: memory walker initial address miscalculation
linux-user: don't include timerfd if not needed
linux-user: Simplify timerid checks on g_posix_timers range
linux-user: Convert blkpg to use a special subop handler
linux-user: Enable epoll_pwait syscall for ARM
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this, builds on older systems fail with:
qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory
v2: fix the usual case where CONFIG_TIMERFD is enabled..
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We check whether the passed in timer id is negative on all calls
that involve g_posix_timers.
However, these checks are bogus. First off we limit the timer_id to
16 bits which is not what Linux does. Then we check whether it's negative
which it can't be because we masked it.
We can safely remove the masking. For the negativity check we can just
treat the timerid as unsigned and only check for upper boundaries.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The blkpg ioctl can take different payloads depending on the opcode in
its payload structure. Create a new special ioctl handler that can only
deal with partition style ones for now.
This patch fixes running parted for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We have support for the epoll_pwait syscall, but it wasn't enabled for
ARM guests because we hadn't defined the syscall number; correct this
deficiency.
Reported-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
GDB assumes that watchpoint set via the gdbstub remote protocol will
behave in the same way as hardware watchpoints for the target. In
particular, whether the CPU stops with the PC before or after the insn
which triggers the watchpoint is target dependent. Allow guest CPU
code to specify which behaviour to use. This fixes a bug where with
guest CPUs which stop before the accessing insn GDB would manually
step forward over what it thought was the insn and end up one insn
further forward than it should be.
We set this flag for the CPU architectures which set
gdbarch_have_nonsteppable_watchpoint in gdb 7.7:
ARM, CRIS, LM32, MIPS and Xtensa.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Michael Walle <michael@walle.cc> (for lm32)
Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
# gpg: Signature made Sat 04 Oct 2014 21:24:46 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (23 commits)
blockdev-test: Test device_del after drive_del
blockdev-test: Factor out some common code into helpers
blockdev-test: Simplify by using g_assert_cmpstr()
blockdev-test: Clean up bogus drive_add argument
blockdev-test: Use single rather than double quotes in QMP
drive_del-test: Merge of qdev-monitor-test, blockdev-test
iotests: qemu-img info output for corrupt image
qapi: Add corrupt field to ImageInfoSpecificQCow2
iotests: Use _img_info
util: Emancipate id_wellformed() from QemuOpts
q35/ahci: Pick up -cdrom and -hda options
qtest/bios-tables: Correct Q35 command line
ide: Update ide_drive_get to be HBA agnostic
pc/vl: Add units-per-default-bus property
blockdev: Allow overriding if_max_dev property
blockdev: Orphaned drive search
qemu-iotests: Fix supported cache modes for 052
make check-block: Use default cache modes
Modify qemu_opt_rename to realize renaming all items in opts
vmdk: Fix integer overflow in offset calculation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just like lazy-refcounts, this field will be present iff the qcow2
compat level is 1.1 (or probably any future revision).
As expected, this breaks some tests due to the new field present in
qemu-img info output; so fix their output accordingly.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.
Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Today, all accelerator init functions affect some global state:
* tcg_init() calls tcg_exec_init() and affects globals such as tcg_tcx,
page size globals, and possibly others;
* kvm_init() changes the kvm_state global, cpu_interrupt_handler, and possibly
others;
* xen_init() changes the xen_xc global, and registers a change state handler.
With the new accelerator QOM classes, initialization may now be split in two
steps:
* instance_init() will do basic initialization that doesn't affect any global
state and don't need MachineState or MachineClass data. This will allow
probing code to safely create multiple accelerator objects on the fly just
for reporting host/accelerator capabilities, for example.
* accel_init_machine()/init_machine() will save the accelerator object in
MachineState, and do initialization steps which still affect global state,
machine state, or that need data from MachineClass or MachineState.
To clarify the difference between those two steps, rename init() to
init_machine().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As qtest_availble() returns 1 only when CONFIG_POSIX is set, keep
setting AccelClass.available to keep current behavior (this is different
from what we did for KVM and Xen).
This also allows us to make qtest_init_accel() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that this has an user-visible side-effect: instead of reporting
"Xen is not supported for this target", QEMU binaries not supporting Xen
will report "xen accelerator does not exist".
As xen_available() always return 1 when CONFIG_XEN is enabled, we don't
need to set AccelClass.available anymore. xen_enabled() is not being
removed yet, but only because vl.c is still using it.
This also allows us to make xen_init() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that this has an user-visible side-effect: instead of reporting
"KVM is not supported for this target", QEMU binaries not supporting KVM
will report "kvm accelerator does not exist".
As kvm_availble() always return 1 when CONFIG_KVM is enabled, we don't
need to set AccelClass.available anymore. kvm_enabled() is not being
completely removed yet only because qmp_query_kvm() still uses it.
This also allows us to make kvm_init() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the accelerator classes won't be registered anymore if they are not
enabled at compile time, saying "does not exist" may be misleading, as
the accelerator may be simply disabled. Change the wording to just say
"not found".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we move accel classes outside accel.c, the available() function
won't be necessary anymore, because the classes will be registered only
if the accelerator code is really enabled at build time.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of having a static AccelType array, register a class for each
accelerator type, and use class name lookup to find accelerator
information.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems that it might be a good idea to know what is at the remote
end of a socket for tracking down issues. So add that to the
socket filename.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a "reconnect" option to socket backends that gives a reconnect
timeout. This only applies to client sockets. If the other end
of a socket closes the connection, qemu will attempt to reconnect
after the given number of seconds.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way we can tell if the socket is connected or not. It also splits
the string conversions out into separate functions to make this more
convenient.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This keeps them from having to be passed around and makes them
available for later functions, like printing and reconnecting.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all socket configuration to qmp_chardev_open_socket().
qemu_chr_open_socket_fd() just opens the socket. This is getting ready
for the reconnect code, which will call open_sock_fd() on a reconnect
attempt.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IDs have long spread beyond QemuOpts: not everything with an ID
necessarily goes through QemuOpts. Commit 9aebf3b is about such a
case: block layer names are meant to be well-formed IDs, but some of
them don't go through QemuOpts, and thus weren't checked. The commit
fixed that the straightforward way: rename the internal QemuOpts
helper id_wellformed() to qemu_opts_id_wellformed() and give it
external linkage.
Instead of using it directly in block.c, the commit adds wrapper
bdrv_is_valid_name(), probably to hide the connection to QemuOpts.
Go one logical step further: emancipate IDs from QemuOpts. Rename the
function back to id_wellformed(), and put it in another file. While
there, clean up its value to bool. Peel off the bdrv_is_valid_name()
wrapper.
[Replaced stray return 0 with return false to match bool returns used
elsewhere in id_wellformed().
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the Q35 board types are to begin recognizing
and decoding syntactic sugar for drive/device
declarations, then workarounds found within
the qtests suite need to be adjusted to prevent
any test failures after the fix.
bios-tables-test improperly uses this cli:
-drive file=etc,id=hd -device ide-hd,drive=hd
Which will create a drive and device due to
the lack of specifying if=none. Then, it will
attempt to create a second device and fail.
This patch corrects this test to always use
the full, non-sugared -device/-drive syntax
for both PC and Q35.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.
This property only overrides the mapping for drives matching
the block_default_type interface.
This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.
Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.
Examples:
Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.
-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.
These are invalid for AHCI. They now become, under Q35 only:
-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.
The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.
Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.
Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.
Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.
In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.
This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586
[Resolved conflict with commit 5abbf0ee4d
("block: Catch simultaneous usage of options and their aliases"). Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$ ./qemu-img create -f qcow2 overlay \
-b 'json: { "file.driver":"ssh",
"file.host":"localhost",
"file.host_key_check":"no" }'
qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed.
Aborted
A similar crash also happens if the file.host field is omitted.
https://bugzilla.redhat.com/show_bug.cgi?id=1147343
Bug found and reported by Jun Li.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The while loop variabal is "bs1",
but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name.
Broken in commit a89d89d, v1.7.0.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vga: cleanups, prepare for endianness switching
# gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-20141002-1:
vga: Add endian to vmstate
vga: Make fb endian a common state variable
vga: Rename vga_template.h to vga-helpers.h
vga: Remove some "should be done in BIOS" comments
cirrus: Remove non-32bpp cursor drawing
vga: Simplify vga_draw_blank() a bit
vga: Remove rgb_to_pixel indirection
vga: Separate LE and BE conversion functions
vga: Remove remainder of old conversion cruft
vga: Start cutting out non-32bpp conversion support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (39 commits)
block/iscsi: handle failure on malloc of the allocationmap
util: introduce bitmap_try_new
virtio-scsi: Handle TMF request cancellation asynchronously
scsi: Introduce scsi_req_cancel_async
scsi: Introduce scsi_req_cancel_complete
scsi: Drop SCSIReqOps.cancel_io
scsi: Unify request unref in scsi_req_cancel
scsi-generic: Handle canceled request in scsi_command_complete
scsi: Drop scsi_req_abort
virtio-scsi: Process ".iothread" property
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
virtio-scsi: Batched prepare for cmd reqs
virtio-scsi: Two stages processing of cmd request
virtio-scsi: Add migration state notifier for dataplane code
virtio-scsi: Hook up with dataplane
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
virtio-scsi: Add 'iothread' property to virtio-scsi
virtio: add a wrapper for virtio-backend initialization
virtio-9p: fix virtio-9p child refcount in transports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci, pc, virtio, misc bugfixes
A bunch of bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vl: Adjust the place of calling mlockall to speedup VM's startup
pc-dimm: Don't check dimm->node when there is non-NUMA config
pci-hotplug-old: avoid losing error message
Revert "virtio-pci: fix migration for pci bus master"
loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Changes by kraxel:
* Remove bochs dispi interface changes. We'll do that in
a different way to make sure we don't conflict with
possible future bochs dispi interface changes.
* keep live migration bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
It's no longer a template, we only instanciate the file once.
Keep it a #included file so the functions remain static.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Not all platforms have a VGA BIOS, powerpc typically relies on
using the DISPI interface to initialize the card.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Provide different functions for converting from an LE vs a BE
framebuffer. We cannot rely on the simple cases always being
shared surfaces since cirrus will need to always shadow for
cursor emulation, so we need the full set of functions to
be able to later handle runtime switching.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
All the macros used to generate different versions of vga_template.h
are now unnecessary, take them all out and remove the _32 suffix from
most functions.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Nowadays, we either share a surface with the host, or we create
a 32bpp ARGB console surface.
So we only need to draw/convert to 32bpp, enabling us to remove
all but one instance of vga_template.h inclusion (to be further
cleaned up), rgb_to_pixel_* etc...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
regular bitmap_new simply aborts if the memory allocation fails.
bitmap_try_new returns NULL on failure and allows for proper
error handling.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.
Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.
Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.
Let's move it to scsi-bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.
Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.
It will also make implementing asynchronous cancellation easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic
callbacks check io_canceled flag similarly to scsi-disk.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target-arm:
* more EL2/EL3 preparation work
* don't handle c15_cpar changes via tb_flush()
* fix some unused function warnings in ARM devices
* build the GDB XML for 32 bit CPUs into qemu-*-aarch64
* implement guest breakpoint support
# gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140929:
target-arm: Add support for VIRQ and VFIQ
target-arm: Add IRQ and FIQ routing to EL2 and 3
target-arm: A64: Emulate the SMC insn
target-arm: Add a Hypervisor Trap exception type
target-arm: A64: Emulate the HVC insn
target-arm: A64: Correct updates to FAR and ESR on exceptions
target-arm: Don't take interrupts targeting lower ELs
target-arm: Break out exception masking to a separate func
target-arm: A64: Refactor aarch64_cpu_do_interrupt
target-arm: Add SCR_EL3
target-arm: Add HCR_EL2
target-arm: Don't handle c15_cpar changes via tb_flush()
hw/input/tsc210x.c: Delete unused array tsc2101_rates
hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
target-arm: Implement handling of breakpoint firing
target-arm: Implement setting guest breakpoints
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements the core part of dataplane feature of virtio-scsi.
A few fields are added in VirtIOSCSICommon to maintain the dataplane
status. These fields are managed by a new source file:
virtio-scsi-dataplane.c.
Most code in this file will run on an iothread, unless otherwise
commented as in a global mutex context, such as those functions to
start, stop and setting the iothread property.
Upon start, we set up guest/host event notifiers, in a same way as
virtio-blk does. The handlers then pop request from vring and call into
virtio-scsi.c functions to process it. So we need to make sure make all
those called functions work with iothread, too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move VirtIOSCSIReq to header and add one field "vring" as a wrapper
structure of Vring, VirtIOSCSIVring.
This is necessary for coming dataplane code that runs uses vring on
iothread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is
dropped again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon
unplug the virtio-9p child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-9p-pci all duplicate the qdev properties of their
V9fsState child. This approach does not work well with
string or pointer properties since we must be careful
about leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
V9fsState child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-balloon child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-rng child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-rng-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIORNG child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIORNG child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-serial child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-serial-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSerial child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSerial child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-scsi/vhost-scsi child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSCSI/VHostSCSI child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSCSI/VHostSCSI child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-net child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the
qdev properties of their VirtIONet child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIONet child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using structures, which imply some amount of overhead
on certain ABIs, use pointer types.
This actually reduces the size of the binaries vs a NON-debug
build on ppc64 and x86_64, due to a reduction in the number of
sign-extension insns.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The combination of always_inline + artificial allows tiny inline
functions to be written that do not interfere with debugging.
In particular, gdb will not step into an artificial function.
The always_inline attribute was introduced in gcc 4.2,
and the artificial attribute was introduced in gcc 4.3.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The "old" qemu_ld opcode did not specify the size of the result,
and so we had to assume full register width. With the new opcodes,
we can narrow the result.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The pre-v9 ADDX/SUBX insns were renamed ADDC/SUBC for v9.
Standardizing on the v9 name makes things less confusing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
On T4 and newer Sparc chips we have an add-with-carry insn
that takes its input from %xcc instead of %icc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the moment we try to handle c15_cpar with the strategy of:
* emit generated code which makes assumptions about its value
* when the register value changes call tb_flush() to throw
away the now-invalid generated code
This works because XScale CPUs are always uniprocessor, but
it's confusing because it suggests that the same approach can
be taken for other registers. It also means we do a tb_flush()
on CPU reset, which makes multithreaded linux-user binaries
even more likely to fail than would otherwise be the case.
Replace it with a combination of TB flags for the access
checks done on cp0/cp1 for the XScale and iwMMXt instructions,
plus a runtime check for cp2..cp13 coprocessor accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1411056959-23070-1-git-send-email-peter.maydell@linaro.org
The qemu-aarch64 and qemu-system-aarch64 binaries include support
for all the 32 bit ARM CPUs as well as the 64 bit ones. This means
we need to build in the GDB XML files for the 32 bit CPUs too.
Otherwise gdb will complain:
warning: while parsing target description (at line 1): Could not load XML document "arm-core.xml"
when you try to connect to our gdbserver to debug a 32 bit CPU
running in a qemu-aarch64 or qemu-system-aarch64 binary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410533739-13836-1-git-send-email-peter.maydell@linaro.org
Implement handling of breakpoint event firing to correctly
inject the debug exception into the guest.
Since the breakpoint and watchpoint control register format is
very similar we adjust wp_matches() to also handle breakpoints
as well rather than using a separate function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410523465-13400-3-git-send-email-peter.maydell@linaro.org
This patch adds support for setting guest breakpoints
based on values the guest writes to the DBGBVR and DBGBCR
registers. (It doesn't include the code to handle when
these breakpoints fire, so has no guest-visible effect.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410523465-13400-2-git-send-email-peter.maydell@linaro.org
If we configure mlock=on and memory policy=bind at the same time,
It will consume lots of time for system to treat with memory,
especially when call mbind behind mlockall.
Adjust the place of calling mlockall, calling mbind before mlockall
can remarkably reduce the time of VM's startup.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It should not break memory hotplug feature if there is non-NUMA option.
This patch would also allow to use pc-dimm as replacement for initial memory
for non-NUMA configs.
Note: After this patch, the memory hotplug can work normally for Linux guest OS
when there is non-NUMA option and NUMA option. But not support Windows guest OS
to hotplug memory with no-NUMA config, actully, it's Windows limitation.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once upon a time, it was decided that qemu_realloc(ptr, 0) should
abort. Switching to glib retired that bright idea. A bit of code
that was added to cope with it (commit 3e372cf) is still around. Bury
it.
See also commit 6528499.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some hosts are slow or overloaded so test execution takes a long time.
Test cases use timeouts to protect against an infinite loop stalling the
test forever (especially important in automated test setups).
Commit 6cd14054b6 ("libqos virtio:
Increase ISR timeout") increased the clock_step() value in an attempt to
lengthen the virtio interrupt wait timeout, but timeout failures are
still occuring on the Travis automated testing platform.
This is because clock_step() only affects the guest's virtual time.
Virtio requests can be bottlenecked on host disk I/O latency - which
cannot be improved by stepping the clock, so the fix was ineffective.
This patch changes the qvirtio_wait_queue_isr() and
qvirtio_wait_config_isr() timeout mechanism from loop iterations to
microseconds. This way the test case can specify an absolute 30 second
timeout. Number of loop iterations is not a reliable timeout mechanism
since the speed depends on many factors including host performance.
Tests should no longer timeout on overloaded Travis instances.
Cc: Marc Marí <marc.mari.barcelo@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio event_index feature lets the device driver tell the device
how many requests to process before raising the next interrupt.
virtio-blk-test.c tries to verify that the device does not raise an
interrupt unnecessarily.
Unfortunately the test has a race condition. It spins checking for an
interrupt up to 100 times and then assumes the request has finished. On
a slow host the I/O request could still be in flight and the test would
fail.
This patch waits for the request to complete, or until a 30-second
timeout is reached. If an interrupt is raised while waiting the test
fails since the device was not supposed to raise interrupts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for the presence of posix_fallocate() in configure and only
compile in support for PREALLOC_MODE_FALLOC when it's there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block patches
# gpg: Signature made Fri 26 Sep 2014 19:57:52 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: Fail test if explicit test case number is unknown
block: Validate node-name
vpc: fix beX_to_cpu() and cpu_to_beX() confusion
docs: add blkdebug block driver documentation
block: Catch simultaneous usage of options and their aliases
block: Specify -drive legacy option aliases in array
block: Improve message for device name clashing with node name
qemu-nbd: Destroy the BlockDriverState properly
block: Keep DriveInfo alive until BlockDriverState dies
blockdev: Disentangle BlockDriverState and DriveInfo creation
blkdebug: show an error for invalid event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simply switch function pointers when entering/leaving vga mode.
Allows to remove wrapper functions which do nothing but dispatch
calls depending on the current qxl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function to allow display emulations to switch the hwops
function pointers. This is useful for devices which have two
completely different operation modes. Typical case is the vga
compatibility mode vs. native mode in qxl and the upcoming
virtio-vga device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
trivial patches for 2014-09-26
# gpg: Signature made Fri 26 Sep 2014 18:33:53 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB
* remotes/mjt/tags/trivial-patches-2014-09-26:
os-posix: report error message when lock file failed
os-posix: remove confused errno
os-posix: change tab to space avoid violating coding style
qapi: Update docs given recent event, spacing fixes
qapi: Ignore files created during make check
qapi: Consistent whitespace in tests/Makefile
vmxcap: Update according to SDM of September 2014
.travis.yml: remove "make check" from main matrix
.travis.yml: pre-seed sub-modules for speed
.travis.yml: make the make slightly more parallel
.travis.yml: add more linux-user to the build matrix
tests: avoid running duplicate qom-tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments. This trickiness has become pointless. Clean
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It will cause that create vm failed When manager
tool is killed forcibly (kill -9 libvirtd_pid),
the file not was unlink, and unlock. It's better
that report the error message for users.
Signed-off-by: Huangweidong <weidong.huang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If we get inside the 'else if (status == 1)' conditional,
then we know that read() succeeded, and therefore errno is
unspecified. Printing strerror(errno) on a random value
is not helpful.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
connect() doesn't "connect to socket", it connects a socket to an
address and, if it's of type SOCK_STREAM, initiates a connection.
Scratch "to".
listen() does "set socket to listening mode", but it sounds awkward.
Change to "listen on socket".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 21cd70d added event support but didn't document what the
generated code looks like. Commit 05dfb26 removed some unwanted
spaces in the generated code, but didn't reflect those changes
into the documentation. Finally, the docs start with a big
disclaimer about QMP not using QAPI yet, which feels rather stale.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After an in-tree build and run of 'make check-{qapi-schema,unit}',
I noticed some leftover files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tests/Makefile had a mix of TAB vs. 8-space indentation; given
that it is a Makefile, TAB is more idiomatic even though in these
particular cases the choice of whitespace didn't matter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is more of an exercise of the dealloc visitor, where it may
erroneously use an uninitialized discriminator field as indication
that union fields corresponding to that discriminator field/type are
present, which can lead to attempts to free random chunks of heap
memory.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
If the .data field of a QAPI Union is NULL, we don't need to free
any of the union fields.
Make use of the new visit_start_union interface to access this
information and instruct the generated code to not visit these
fields when this occurs.
Cc: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In some cases an input visitor might bail out on filling out a
struct for various reasons, such as missing fields when running
in strict mode. In the case of a QAPI Union type, this may lead
to cases where the .kind field which encodes the union type
is uninitialized. Subsequently, other visitors, such as the
dealloc visitor, may use this .kind value as if it were
initialized, leading to assumptions about the union type which
in this case may lead to segfaults. For example, freeing an
integer value.
However, we can generally rely on the fact that the always-present
.data void * field that we generate for these union types will
always be NULL in cases where .kind is uninitialized (at least,
there shouldn't be a reason where we'd do this purposefully).
So pass this information on to Visitor implementation via these
optional start_union/end_union interfaces so this information
can be used to guard against the situation above. We will make
use of this information in a subsequent patch for the dealloc
visitor.
Cc: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When a QMP client changes the polling interval time by setting
the guest-stats-polling-interval property, the interval value
is stored and manipulated as an int64_t variable.
However, the balloon_stats_change_timer() function, which is
used to set the actual timer with the interval value, takes
an int instead, causing an overflow for big interval values.
This commit fix this bug by changing balloon_stats_change_timer()
to take an int64_t and also it limits the polling interval value
to UINT_MAX to avoid other kinds of overflow.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Commit cdaa86a54 ("Add G_IO_HUP handler for socket chardev") exposed a bug in
the way the HMP monitor handles its command buffer. When a client closes the
connection to the monitor, tcp_chr_read() will detect the G_IO_HUP condition
and call tcp_chr_disconnect() to close the server-side connection too. Due to
the fact that monitor reads 1 byte at a time (for each tcp_chr_read()), the
monitor readline state / buffers might contain junk (i.e. a half-finished
command). Thus, without calling readline_restart() on mon->rs in
CHR_EVENT_OPEN, future HMP commands will fail.
Signed-off-by: Stratos Psomadakis <psomas@grnet.gr>
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This adds reporting of RDSEED exiting and XSAVES/XRSTORS #UD and fixes
the range of VMCS revision as well as some typos.
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are problems with unreliability in "make check" which still need
to be tracked down. As the tests are broadly the same for all targets if
added one explicit target to the matrix to run it. However this does
build all softmmu targets to ensure they at least "run"
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A significant portion of the build time is spent initialising all the
sub-modules we use in the source tree. Often this is almost as long as
the build itself. By pre-seeding the .git/modules tree this will
hopefully improve things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Travis VMs have 1.5 cores so we might as well make some use of the
paralellism.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
At the same time I've grouped the $ARCH-linux-user and $ARCH-softmmu
builds together (hoping FS cache helps) and grouped all $ARCH-softmmu
only builds into one target. This reduces the build matrix slightly
which will hopefully help with build times.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since 3687d532 we've been unconditionally adding qom-test to our qtests
for every arch. However, some archs inherit their tests from Makefile
variables for other archs, such as i386/x86_64,
microblaze/microblazeel, and xtensa/xtensaeb. Since these are evaluated
in a lazy manner, we ultimately end up adding qom-test twice.
In the case x86_64, where we have a large number of machine types that
we rerun qom-test for, this has lead to a fairly noticeable increase
in the overall run-time of `make check` (78s vs. 42s on my machine).
Similar speed-ups are visible for other such archs, but not nearly as
significant.
Fix this by only adding qom-test to an arch's test list if it's not
already present.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
since commit 7dda5dc82a ("migration: initialize RAM to zero") the
guest memory is defined zero. No need to call valgrind on guest memory.
This reverts commit 62fe83318d ("qemu: Use valgrind annotations to
mark kvm guest memory as defined") thus speeding up kvm start if
<includedir>/valgrind/valgrind.h is available.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
po/Makefile includes rules.mak to use the nice quiet-command macro.
However, this also brings in a %.mo rule that breaks "make build".
Put our own rule before the include, so that it has precedence.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes migration by extending do_vapic_enable function. This function
called vapic_enable which read cpu number from the guest memory. When cpu
number could not be read, vapic was not enabled while loading the VM state.
This patch adds required code for cpu_number=0 to do_vapic_enable function,
because it is called only when cpu_number=0.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# gpg: Signature made Fri 26 Sep 2014 11:59:34 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
ohci: drop computed flags from trace events
ohci: Split long traces to smaller ones
scripts/tracetool: don't barf on formats with precision
trace: install trace-events file
trace-events: Fix comments pointing to source files
trace-events: Drop orphaned monitor trace event
trace-events: Drop unused megasas trace event
cleanup-trace-events.pl: Tighten search for trace event call
trace: tighten up trace-events regex to fix bad parse
trace-events: drop orphan iscsi trace events
trace-events: drop orphan usb_mtp_data_out
trace-events: drop orphan virtio_blk_data_plane_complete_request
trace: [hmp] Reimplement "trace-event" and "info trace-events" using QMP
trace: [qmp] Add commands to query and control event tracing state
trace: docs: add trace file description
trace: [ust] Fix format string computation in tcg-enabled events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the termination signals SIGINT, SIGHUP and SIGTERM to the
list of signals which we handle synchronously via a signalfd.
This avoids a race condition where if we took the SIGTERM
in the middle of qemu_shutdown_requested:
int r = shutdown_requested;
[SIGTERM here...]
shutdown_requested = 0;
then the setting of the shutdown_requested flag by
termsig_handler() would be lost and QEMU would fail to
shut down. This was causing 'make check' to hang occasionally.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1411660269-11081-1-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.
This splits long tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Install the ./trace-events file into the data directory. This file
contains the list of trace events that were built into QEMU at
compile-time.
The file is a handy reference for the set of trace events that the QEMU
binary was built with. It is also needed by the simpletrace.py tool
that parses binary trace data either emitted from QEMU when built with
--enable-trace-backend=simple or by the SystemTap simpletrace script
that QEMU provides.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1411486175-3017-1-git-send-email-stefanha@redhat.com
A few files have been renamed without updating their comment here. A
few events have been added in the wrong place. Clean that up.
Comments with no space after the '#' look ugly and confuse
cleanup-trace-events.pl. Insert a space.
scripts/cleanup-trace-events.pl is now happy again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The script can get fooled too easily. For instance, it finds
trace_megasas_io_read_start when looking for trace_megasas_io_read,
and incorrectly concludes that event megasas_io_read is used.
Supply -w to git-grep to tighten the search.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411476811-24251-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use \w for properties and trace event names since they are both drawn
from [a-zA-Z0-9_] character sets.
The .* for matching properties was too aggressive and caused the
following failure with foo(int rc) "(this is a test)":
Traceback (most recent call last):
File "scripts/tracetool.py", line 139, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 134, in main
binary=binary, probe_prefix=probe_prefix)
File "scripts/tracetool/__init__.py", line 334, in generate
events = _read_events(fevents)
File "scripts/tracetool/__init__.py", line 262, in _read_events
res.append(Event.build(line))
File "scripts/tracetool/__init__.py", line 225, in build
return Event(name, props, fmt, args, arg_fmts)
File "scripts/tracetool/__init__.py", line 185, in __init__
% ", ".join(unknown_props))
ValueError: Unknown properties: foo(int, rc)
Cc: Lluís Vilanova <vilanova@ac.upc.edu>
Reported-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1411468626-20450-1-git-send-email-stefanha@redhat.com
iscsi_aio_write16_cb, iscsi_aio_writev, iscsi_aio_read16_cb, and
iscsi_aio_readv have not not been in use since commit
063c3378a9 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}").
These were the only trace events in block/iscsi.c so drop the the
trace.h include.
Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-4-git-send-email-stefanha@redhat.com
When user used the trace print command from docs/tracing.txt:
./scripts/simpletrace.py trace-events trace-*
the user maybe be misled by the "trace-*", because if user
directly copy the comand line to run, there alway print the
bored message:
"usage: ./scripts/simpletrace.py <trace-events> <trace-file>"
then we should describe that the "trace-*" represented.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
TCG-enabled events start with two format strings. Delay per-argument format
computation until requested ('Event.formats').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Update OpenBIOS images
# gpg: Signature made Thu 25 Sep 2014 13:35:55 BST using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we expand a number range, we just print "$id - unknown test,
ignored", this is convenient if we want to run a range of tests.
When we designate a test case number explicitly, we shouldn't just
ignore it if the case script doesn't exist.
Print an error and fail the test.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The device_name of a BlockDriverState is currently checked because it is
always used as a QemuOpts ID and qemu_opts_create() checks whether such
IDs are wellformed.
node-name is supposed to share the same namespace, but it isn't checked
currently. This patch adds explicit checks both for device_name and
node-name so that the same rules will still apply even if QemuOpts won't
be used any more at some point.
qemu-img used to use names with spaces in them, which isn't allowed any
more. Replace them with underscores.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The beX_to_cpu() and cpu_to_beX() functions perform the same operation -
they do a byteswap if the host CPU endianness is little-endian or a
nothing otherwise.
The point of two names for the same operation is that it documents which
direction the data is being converted. This makes it clear whether the
data is suitable for CPU processing or in its external representation.
This patch fixes incorrect beX_to_cpu()/cpu_to_beX() usage.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blkdebug block driver is undocumented. Documenting it is worthwhile
since it offers powerful error injection features that are used by
qemu-iotests test cases.
This document will make it easier for people to learn about and use
blkdebug.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While thinking about precedence of conflicting block device options from
different sources, I noticed that you can specify both an option and its
legacy alias at the same time (e.g. readonly=on,read-only=off). Rather
than specifying the order of precedence, we should simply forbid such
combinations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Instead of a series of qemu_opt_rename() calls, use an array that
contains all of the renames and call qemu_opt_rename() in a loop. This
will keep the code readable even when we add an error return to
qemu_opt_rename().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Match the bdrv_new() with a bdrv_unref(), just to be tidy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() mixes up BlockDriverState and DriveInfo initialization
Finish the BlockDriverState job before starting to mess with
DriveInfo. Easier on the eyes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is easy to typo a blkdebug configuration and waste a lot of time
figuring out why no rules are matching.
Push the Error** down into add_rule() so we can report an error when the
event name is invalid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compiler warning (w32, w64):
include/hw/virtio/virtio_ring.h:142:26: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
When sizeof(long) < sizeof(void *), this is not only a warning but a
real program error.
Add also missing blanks in the same statement.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1411536002-14088-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Endian updates to re-fix cross endian host and guest and
enable the same for ROM loading (Alexey)
# gpg: Signature made Tue 23 Sep 2014 18:03:03 BST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-20140923.0:
vfio: make rom read endian sensitive
Revert "vfio: Make BARs native endian"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The S24/TCX framebuffer is a mildly accelerated video card with
blitter, stippler and hardware cursor.
* Solaris and NetBSD 6.x use all the hardware acceleration features
* The Xorg driver (used by Linux) can use the hardware cursor only
This patch implements hardware acceleration in both 8 bit and 24 bit
modes. It is based on the NetBSD driver sources and from tests with
Solaris.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When guest sends udp packet with source port and source addr 0,
uninitialized socket is picked up when looking for matching and already
created udp sockets, and later passed to sosendto() where NULL pointer
dereference is hit during so->slirp->vnetwork_mask.s_addr access.
Fix this by checking that the socket is not just a socket stub.
This is CVE-2014-3640.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Xavier Mehrenberger <xavier.mehrenberger@airbus.com>
Reported-by: Stephane Duverger <stephane.duverger@eads.net>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20140918063537.GX9321@dhcp-25-225.brq.redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
usb: enable hotplug, switch to realize, ohci tracing, misc fixes.
# gpg: Signature made Tue 23 Sep 2014 12:42:29 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20140923-1: (26 commits)
usb: tag standalone ehci as hotpluggable
usb: tag standalone uhci as hotpluggable
usb: tag xhci as hotpluggable
usb-serial: only check speed once at realize time
usb-bus: introduce a wrapper function to check speed
usb-bus: remove "init" from USBDeviceClass struct
usb-mtp: convert init to realize
usb-redir: convert init to realize
usb-audio: convert init to realize
dev-wacom: convert init to realize
dev-hid: convert init to realize
usb-ccid: convert init to realize
dev-serial: convert init to realize
dev-bluetooth: convert init to realize
dev-uas: using error_report instead of fprintf
dev-uas: convert init to realize
dev-storage: usring error_report instead of fprintf/printf
dev-storage: convert init to realize
usb-hub: convert init to realize
libusb: using error_report instead of fprintf
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the "common part" to handle one cmd request. Refactor out for
later usage of dataplane iothread code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command direction according to the guest-passed buffers
is already stored in the VirtIOSCSIReq. We can use it instead
of computing it again from req->elem.
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VirtQueueElement is a very big structure (>48k!), since it will be
initialzed by virtqueue_pop, we can save the expensive zeroing here.
This saves a few microseconds per request in my test:
[fio-test] rw bs iodepth jobs bw iops latency
--------------------------------------------------------------------------------------------
Before read 4k 1 1 110 28269 34
After read 4k 1 1 131 33745 28
Whereas,
virtio-blk read 4k 1 1 217 55673 16
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zeroing sense buffer for each scsi request is not efficient, we can just
leave it uninitialized because sense_len is set to 0.
Move the implicitly zeroed fields to the end of the structure and use a
partial memset.
The explicitly initialized fields (by scsi_req_alloc or scsi_req_new)
are moved to the beginning of the structure, before sense buffer, to
skip the memset.
Also change g_malloc0 to g_slice_alloc.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390x/kvm: some fixes and cleanups
1. sclp: get of of duplicate defines
2. ccw: implement and fix handling of some special cases
# gpg: Signature made Tue 23 Sep 2014 13:10:47 BST using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
* remotes/borntraeger/tags/s390x-20140923:
s390x/css: catch ccw sequence errors
s390x/css: support format-0 ccws
s390x: remove duplicate defines in SCLP code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for format-0 ccws in channel programs. As a format-1 ccw
contains the same information as format-0 ccws, only supporting larger
addresses, simply convert every ccw to format-1 as we walk the chain.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
# gpg: Signature made Mon 22 Sep 2014 12:41:59 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (59 commits)
block: Always compile virtio-blk dataplane
vring: Better error handling if num is too large
virtio: Import virtio_vring.h
async: aio_context_new(): Handle event_notifier_init failure
block: vhdx - fix reading beyond pointer during image creation
block: delete cow block driver
block/archipelago: Fix typo in qemu_archipelago_truncate()
ahci: Add test_identify case to ahci-test.
ahci: Add test_hba_enable to ahci-test.
ahci: Add test_hba_spec to ahci-test.
ahci: properly shadow the TFD register
ahci: add test_pci_enable to ahci-test.
ahci: Add test_pci_spec to ahci-test.
ahci: MSI capability should be at 0x80, not 0x50.
ahci: Adding basic functionality qtest.
layout: Add generators for refcount table and blocks
fuzz: Add fuzzing functions for entries of refcount table and blocks
docs: List all image elements currently supported by the fuzzer
qapi/block-core: Add "new" qcow2 options
qcow2: Add overlap-check.template option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a flag to EHCIPCIInfo saying whenever the controller supports
companions or not. Make sure we only allow registering companions for
ehci versions supporting that. Enable pci hotplug for the ehci
variants not supporting companions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
uhci hostadapters in companion setups can't be hotplugged. So leave
hotplug disabled for all ich9 variants (which are already tagged with
unplug = true in the info struct). For the other variants we'll enable
hotplug and remove the companion setup properties.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Whatever the chardev is open or not, we should assure
the speed is matched each other. So, call usb_check_attach()
check speed. And then pass &error_abort at all calls to
usb_device_attach().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of qerror_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
meanwhile, qerror_report_err() is a transitional interface to
help with converting existing HMP commands to QMP. It should
not be used elsewhere.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.
Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This converts many kinds of debug prints to traces.
This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.
This makes OHCI errors (such as "DMA error") invisible by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
trivial patches for 2014-09-22
# gpg: Signature made Mon 22 Sep 2014 09:10:03 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB
* remotes/mjt/tags/trivial-patches-2014-09-22:
arch_init: Setting QEMU_ARCH enum straight
pc: Add missing 'static' attribute
block: allow creation of fixed vhdx images
vl: Print maxmem in hex format for error message
configure: trivial fixes
xen-hvm.c: Always return -1 when failure occurs in xen_hvm_init()
rdma: Fix incorrect description in comments
Fix typos and misspellings in comments
qemu-char: Permit only a single "stdio" character device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When scsi_bus_legacy_add_drive() return NULL, meanwhile err will
be not NULL, which will casue memory leak and missing error message.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All memory regions used by VFIO are LITTLE_ENDIAN and they
already take care of endiannes when accessing real device BARs
except ROM - it was broken on BE hosts.
This fixes endiannes for ROM BARs the same way as it is done
for other BARs.
This has been tested on PPC64 BE/LE host/guest in all possible
combinations including TCG.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[aik: added commit log]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reverts commit c40708176a.
The resulting code wrongly assumed target and host endianness are
the same which is not always the case for PPC64.
[aw: or potentially any host supporting VFIO and TCG]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This header has no further dependencies. It only has some stable data
types and primitive functions, so we can copy it to include/hw/virtio in
order to allow vring code (and its user virtio-blk dataplane) to be
built unconditionally, even for cross compiling.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1410329871-28885-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.
The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.
The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.
This commit adds an error message on failure:
# qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
qemu: Failed to initialize event notifier: Too many open files in system
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In vhdx_create_metadata(), we allocate 40 bytes to entry_buffer for
the various metadata table entries. However, we write out 64kB from
that buffer into the new file. Only write out the correct 40 bytes.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Utilizing all of the bring-up code in pci_enable and hba_enable,
this test issues a simple IDENTIFY command via the HBA and retrieves
the response via the PIO receive mechanisms of the HBA.
Bugs: The DPS interrupt (Descriptor Processed Status) does not
currently get set. This will need to be adjusted in a future
patch series when the AHCI DMA pathways are reworked to allow
the feature, which may be utilized by OSX guests.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This test engages the HBA functionality and initializes
values to sane defaults to allow for minimal HBA functionality.
Buffers are allocated and pointers are updated to allow minimal
I/O commands to complete as expected. Error registers and responses
are sanity checked for specification adherence.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test routine that checks the boot-up values of the HBA
configuration memory space against the AHCI 1.3 specification
and Intel ICH9 data sheet (for Q35 machines) for adherence and
sane values.
The HBA is not yet engaged or put into the idle state.
[Replaced g_assert_false(...) with g_assert(!...) for glib <2.38
compatibility, reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1408643079-30675-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In a real AHCI device, several S/ATA registers are mirrored or shadowed
within the AHCI register set. These registers are not updated
synchronously for each read access, but are instead updated after a
Device-to-Host Register FIS packet is received. The D2H FIS contains
the values from these registers on the device.
In QEMU, by reaching directly into the device to grab these bits before
they are "sent," we may introduce race conditions where unexpected
values are present "before they are sent" which could cause issues for
some guests, particularly if an attempt is made to read the PxTFD
register prior to enabling the port, where incorrect values will be read.
This patch also addresses the boot-time values for the PxTFD and PxSIG
registers to bring them in line with the AHCI 1.3 specification.
Lastly, several fields (PxTFD, PxSIG and PxSACT) are read-only,
and any attempts to write to them should be ignored.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a test wherein we engage the PCI AHCI
device and ensure that the memory region for the
HBA functionality is now accessible.
Under Q35 environments, additional PCI configuration
is performed to ensure that the HBA functionality
will become usable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds a specification adherence test for AHCI
where the boot-up values for the PCI configuration space
are compared against the AHCI 1.3 specification.
This test does not itself attempt to engage the device.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the Intel ICH9 data sheet, the MSI capability offset
in the PCI configuration space for ICH9 AHCI devices is
specified to be 0x80.
Further, the PCI capability pointer should always point
to 0x80 in ICH9 devices, despite the fact that AHCI 1.3
specifies that it should be pointing to PMCAP (Which in
this instance would be 0x70) to maintain adherence to
the Intel data sheet specifications and real observed behavior.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, there is no qtest to test the functionality of
the AHCI functionality present within the Q35 machine type.
This patch adds a skeleton for an AHCI test suite,
and adds a simple sanity-check test case where we
identify that the AHCI device is present, then
disengage the virtual machine.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Being able to set the overlap-check option to a string and then refine
it via the overlap-check.* options is a nice idea for the command line
but does not work so well for non-flattened dicts. In that case, one can
only specify either but not both, so add a field to overlap-check.*
which does the same as directly specifying overlap-check but can be used
in conjunction with the other fields in non-flattened dicts.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1408557576-14574-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Offsets taken from the L1, L2 and refcount tables are generally assumed
to be correctly aligned. However, this cannot be guaranteed if the image
has been written to by something different than qemu, thus check all
offsets taken from these tables for correct cluster alignment.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1409926039-29044-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Not every BLOCK_IMAGE_CORRUPTED event must be fatal; for example, when
reading from an image, they should generally not be. Nonetheless, even
an image only read from may of course be corrupted and this can be
detected during normal operation. In this case, a non-fatal event should
be emitted, but the image should not be marked corrupt (in accordance to
"fatal" set to false).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1409926039-29044-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an analogue to Linux null_blk. It can be used for testing or
benchmarking block device emulation and general block layer
functionalities such as coroutines and throttling, where disk IO is not
necessary or wanted.
Use null-aio:// for AIO version, and null-co:// for coroutine version.
[Resolved conflict with Fam's async bdrv_aio_cancel() series:
1. Drop .bdrv_aio_cancel() since it is now done by block.c
2. Rename qemu_aio_release() to qemu_aio_unref()
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1410415798-20673-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If ret is WAIT_TIMEOUT and there was an event returned by select(),
we can write to a location after the end of the array. But in
that case we can retry the WaitForMultipleObjects call with the
same set of events, so just move the event[ret - WAIT_OBJECT_0]
assignment inside the existin conditional.
Reported-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normally, qmp_device_list_properties() may return NULL when
a device haven't special properties excpet Object and DeviceState
properties, such as virtio-balloon-device.
We just need check local_err instead of prop_list.
Example:
Segmentation fault (core dumped)
The backtrace as below:
Program received signal SIGSEGV, Segmentation fault.
0x00005555559af1a8 in error_get_pretty (err=0x0) at util/error.c:152
152 return err->msg;
(gdb) bt
func=0x55555574a6ca <device_help_func>, opaque=0x0, abort_on_failure=0) at util/qemu-option.c:1072
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all the implementations are converted to asynchronous version
and we can emulate synchronous cancellation with it. Let's drop the
unused member.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We know that either bh is scheduled or ide_issue_trim_cb will be called
again, so we just set i, j and ret to the right values. In both cases,
ide_trim_bh_cb will be called.
Also forward the cancellation to the iocb->aiocb which we get from
bdrv_aio_discard.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also drop the now unused SheepdogAIOCB.finished field. Note that this
aio is internal to sheepdog driver and has NULL cb and opaque, and
should be unused at all.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before, we cancel all the child requests with bdrv_aio_cancel, then free
the acb..
Now we just kick off asynchronous cancellation of child requests and
return, we know quorum_aio_cb will be called later, so in the end
quorum_aio_finalize will take care of calling the caller's cb.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For a fifo read pattern, we only have one running aio (possible other cases that
has less number than num_children in the future), so we need to check if
.acb is NULL against bdrv_aio_cancel() to avoid segfault.
Cc: Eric Blake <eblake@redhat.com>
Cc: Benoit Canet <benoit@irqsave.net>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The cancelled flag is no longer useful. Later the request will complete
as before, and cb will be called.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just call io_cancel (2), if it fails, it means the request is not
canceled, so the event loop will eventually call
qemu_laio_process_completion.
In qemu_laio_process_completion, change to call the cb unconditionally.
It is required by bdrv_aio_cancel_async.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The .cancel_async shares the same the first half with .cancel: try to
steal the request if not submitted yet. In this case set the elem to
THREAD_DONE status and ret to -ECANCELED, which means
thread_pool_completion_bh will call the cb with -ECANCELED.
If the request is already submitted, do nothing, as we know the normal
completion will happen in the future.
Testing code update:
Before, done_cb is only called if the request is already submitted by
thread pool. Now done_cb is always called, even before it is submitted,
because we emulate bdrv_aio_cancel with bdrv_aio_cancel_async. So also
update the test criteria accordingly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the async version of bdrv_aio_cancel, which doesn't block the
caller. It guarantees that the cb is called either before returning or
some time later.
bdrv_aio_cancel can base on bdrv_aio_cancel_async, later we can convert
all .io_cancel implementations to .io_cancel_async, and the aio_poll is
the common logic. In the end, .io_cancel can be dropped.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be useful in synchronous cancel emulation with
bdrv_aio_cancel_async.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before, bdrv_aio_cancel will either complete the request (like normal)
and call CB with an actual return code, or skip calling the request (for
example when the IO req is not submitted by thread pool yet).
We will change bdrv_aio_cancel to do it differently: always call CB
before return, with either [1] a normal req completion ret code, or [2]
ret == -ECANCELED. So the callers' callback must accept both cases. The
existing logic works with case [1], but not [2].
The simplest transition of callback code is do nothing in case [2], just
as if the CB is not called by the bdrv_aio_cancel() call.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the command completion code in IDE and AHCI
was unified to put all command completion inside
of a callback, "cmd_done," we neglected to
ensure that all AHCI/ATAPI command paths would
eventually register as finished. for the PCI
interface to IDE this is not a problem because
cmd_done is a nop, but the AHCI implementation
needs to send a D2H_REG_FIS and interrupt back
to the guest to inform of completion.
This patch adds calls to ide_stop_transfer,
which calls ide_cmd_done, inside of
ide_atapi_cmd_ok and ide_atapi_cmd_error.
This fixes regressions observed by trying to boot QEMU
with a Fedora 20 live CD under Q35/AHCI, which uses
ATAPI command 0x00, which is a status check that may
cause a hang because we never complete, and ATAPI
command 0x56, which is unsupported by our current
implementation and results in an error that we never
report back to the guest.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The parent_vhdx_guid variable is defined but never used, which provokes
complaints from newer versions of clang. Since the variable definition
is here acting as documentation of the image format, mark it with the
'unused' attribute to keep the compiler happy rather than simply
deleting it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Every QEMU_ARCH is now in (1 << n) notation, instead of a mixture of decimal and hexadecimal.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When trying to create a fixed vhd image qemu-img will return the
following error:
qemu-img: test.vhdx: Could not create image: Cannot allocate memory
This happens because of a incorrect check in vhdx.c. Specifficaly,
in vhdx_create_bat(), after allocating memory for the BAT entry,
there is a check to determine if the allocation was unsuccsessful.
The error comes from the fact that it checks if s->bat isn't NULL,
which is true in case of succsessful allocation, and exits with
error ENOMEM.
Signed-off-by: Adelina Tuvenie <atuvenie@cloudbasesolutions.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
usb_msd_init() calls qemu_opts_create() with a made-up ID and false
fail_if_exists. If the ID already exists, it happily messes up those
options, then fails drive_new(), because the BlockDriverState with
that ID already exists, too.
Reproducer: -drive if=none,id=usb0,format=raw -usbdevice disk:tmp.qcow2
Pass true fail_if_exists to qemu_opts_create(), and if it fails, try
the next made-up ID.
The reproducer now succeeds, and creates an usb-storage device with ID
usb1.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In error message, maxmem is printed in Dec but ram_size in Hex.
It is better to print them in same format.
Also use error_report instead of fprintf.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When failure occurs, it need to use "return -1" instead of exit(1), so
an upper layer has a chance to print failure information, too.
For simplicity, in xen_hvm_init(), also use '-1' instead of all
'-errno', since all related upper callers always exit(1) on failure.
It is not a normal function, it does not release related resources when
return -1, so need give related comments for it.
It passes common check:
"./configure --enable-xen && make && make check"
"echo $? == 0"
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since we have supported memory hotplug, VM's ram include pc.ram
and hotplug-memory.
Fix the confused description for rdma migration: pc.ram -> VM's ram
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When more than one is used, the terminal settings aren't restored
correctly on exit. Fixable. However, such usage makes no sense,
because the users race for input, so outlaw it instead.
If you want to connect multiple things to stdio, use the mux
chardev.
Signed-off-by: Li Liu <john.liuli@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Right now, s->poll_msl may linger at "0" value for an arbitrarily long
time, until serial_update_msl is called for the first time. This is
unnecessary, and will lead to the s->poll_msl field being unnecessarily
migrated.
We can call serial_update_msl immediately at realize time (via
serial_reset) and be done with it. The memory-mapped UART was already
doing that, but not the ISA and PCI variants.
Regarding the delta bits, be consistent with what serial_reset does when
the serial port is not backed by a physical serial port, and always clear
them at reset time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a serial port is started, its initial state is all zero. Make
it consistent with reset state instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci, pc, virtio, misc bugfixes
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: leave more space for BIOS allocations
virtio-pci: fix migration for pci bus master
vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation
virtio-pci: enable bus master for old guests
Revert "virtio: don't call device on !vm_running"
virtio-net: drop assert on vm stop
Revert "rng-egd: remove redundant free"
qdev: Move global validation to a single function
qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()
test-qdev-global-props: Test handling of hotpluggable and non-device types
test-qdev-global-props: Initialize not_used=true for all props
test-qdev-global-props: Run tests on subprocess
tests: disable global props test for old glib
test-qdev-global-props: Trivial comment fix
hw/machine: Free old values of string properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since QEMU 2.1, we are allocating more space for ACPI tables, so no
space is left after initrd for the BIOS to allocate memory.
Besides ACPI tables, there are a few other uses of high memory in
SeaBIOS: SMBIOS tables and USB drivers use it in particular. These uses
allocate a very small amount of memory. Malloc metadata also lives
there. So we need _some_ extra padding there to avoid initrd breakage,
but not much.
John Snow found a case where RHEL5 was broken by the recent change to
ACPI_TABLE_SIZE; in his case 4KB of extra padding are fine, but just to
be safe I am adding 32KB, which is roughly the same amount of padding
that was left by QEMU 2.0 and earlier.
Move initrd to leave some space for the BIOS.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current support for bus master (clearing OK bit)
together with the need to support guests which do not
enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust
in case of cross-version migration for the case when
guests use the device before setting DRIVER_OK.
Rip out VIRTIO_PCI_FLAG_BUS_MASTER_BUG and implement a simpler
work-around: treat clearing of PCI_COMMAND as a virtio reset. Old
guests never touch this bit so they will work.
As reset clears device status, DRIVER and MASTER bits are
now in sync, so we can fix up cross-version migration simply
by synchronising them, without need to detect a buggy guest
explicitly.
Drop tracking VIRTIO_PCI_FLAG_BUS_MASTER_BUG completely.
As reset makes the device quiescent, in the future we'll be able to drop
checking OK bit in a bunch of places.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Header length check should happen only if backend is kernel. For user
backend there is no reason to reset this bit.
vhost-user code does not define .has_vnet_hdr_len so
VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides
support it.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit cc943c36fa
pci: Use bus master address space for delivering MSI/MSI-X messages
breaks virtio-net for rhel6.[56] x86 guests because they don't
enable bus mastering for virtio PCI devices. For the same reason,
rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore.
Old guests forgot to enable bus mastering, enable it automatically on
DRIVER (guests use some devices before DRIVER_OK).
Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.
In the future, we might be able to drop checking vm_running
completely, and check vm state directly.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On vm stop, vm_running state set to stopped
before device is notified, so callbacks can get envoked with
vm_running = false; and this is not an error.
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently GlobalProperty.not_used=false has multiple meanings:
* It may be a property for a hotpluggable device, which may or may not
have been used by a device;
* It may be a machine-type-provided property, which may or may not have
been used by a device.
* It may be a user-provided property that was actually not used by
any device.
Simplify the logic by having two separate fields: 'user_provided' and
'used'. This allows the entire global property validation logic to be
contained in a single function, and allows more specific error messages.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure no warning will be printed for hotpluggable types, and warnings
will be printed for non-device types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will ensure we are actually testing the code which sets
not_used=false when the property is used.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are multiple reasons for running the global property tests on a
subprocess:
* We need the global_props lists to be empty for each test case, so
global properties from the previous test won't affect the next one;
* We don't want the qdev_prop_check_global() warnings to pollute test
output;
* With a subprocess, we can ensure qdev_prop_check_global() is printing
the warning messages it should.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
follow-up patch moves global property tests to subprocesses.
Unfortunately with old glib this causes:
tests/test-qdev-global-props.c: In function
‘test_static_prop’:
tests/test-qdev-global-props.c:80:5: error: implicit
declaration of function ‘g_test_trap_subprocess’
[-Werror=implicit-function-declaration]
tests/test-qdev-global-props.c:80:5: error: nested extern
declaration of ‘g_test_trap_subprocess’ [-Werror=nested-externs]
This function was only added in glib 2.38, and our
minimum version is 2.12.
To fix, disable the test for glib < 2.38.
Apply before that patch to avoid breaking bisect.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vnc: set TCP_NODELAY, cleanup in tlc code
# gpg: Signature made Thu 18 Sep 2014 07:02:37 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vnc-20140918-1:
vnc-tls: Clean up dead store in vnc_set_x509_credential()
ui/vnc: set TCP_NODELAY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces cpu_set_fpuc() function, which changes fpuc field
of the CPU state and calls update_fp_status() function.
These calls update status of softfloat library and prevent bugs caused
by non-coherent rounding settings of the FPU and softfloat.
v2 changes:
* Added missed calls and intoduced setter function (as suggested by TeLeMan)
Reviewed-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently you can specify whether you want a UDP chardev backend
to be IPv4 or IPv6 using the ipv4 or ipv6 options if you use the
QemuOpts parsing code in inet_dgram_opts(). However the QMP struct
parsing code in socket_dgram() doesn't provide this flexibility
(which in turn prevents us from converting the UDP backend handling
to the new style QAPI framework).
Use the existing inet_addr_to_opts() function to convert the
remote->inet address to option strings; this handles ipv4 and
ipv6 flags as well as host and port. (It will also convert any
'to' specification, which is harmless as it is ignored in this
context.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-3-git-send-email-peter.maydell@linaro.org
Convert into trace event. Otherwise the message
dma: unregistered DMA channel used nchan=0 dma_pos=0 dma_len=1
gets printed every time and fills up the log-file with 50 MiB / minute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we migrate we ask the kernel about its current belief on what the guest
time would be. However, I've seen cases where the kvmclock guest structure
indicates a time more recent than the kvm returned time.
To make sure we never go backwards, calculate what the guest would have seen as time at the point of migration and use that value instead of the kernel returned one when it's more recent.
This bases the view of the kvmclock after migration on the
same foundation in host as well as guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_pit is running in kmod. kvm_pit is going to inject
interrupt to vm before cpu_synchronize_all_post_init at
dest side. vcpu will lose the pit interrupt, but
ack_irq(in kmod) has been 0. ack_irq become 1 after
vcpu responds pit interrupt. pit interruptcan inject
to vm when ack_irq is 1.
By the way, kvm_pit_vm_state_change has save and load
state of pit, so pre_save and post_load is unnecessary.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.
This solves losing password when changing expiration in qemu monitor.
https://bugzilla.redhat.com/show_bug.cgi?id=1138639
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Block patches
# gpg: Signature made Fri 12 Sep 2014 16:09:43 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
qcow2: Add falloc and full preallocation option
raw-posix: Add falloc and full preallocation option
qapi: introduce PreallocMode and new PreallocModes full and falloc.
block: don't convert file size to sector size
block: round up file size to nearest sector
iotests: Send the correct fd in socket_scm_helper
blockdev: Refuse to drive_del something added with blockdev-add
block: extend BLOCK_IO_ERROR with reason string
dataplane: fix virtio_blk_data_plane_create() op blocker error path
qemu-iotests: Run 025 for Archipelago block driver
block/archipelago: Implement bdrv_truncate()
block: Make the block accounting functions operate on BlockAcctStats
block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
block: Extract the block accounting code
block: Extract the BlockAcctStats structure
IDE: MMIO IDE device control should be little endian
thread-pool: Drop unnecessary includes
xen: Drop redundant bdrv_close() from pci_piix3_xen_ide_unplug()
xen_disk: Plug memory leak on error path
qemu-io: Clean up openfile() after commit 2e40134
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:
qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)
This patch fixes the problem by checking the pixman version.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. Although commit f27b2e1d bumped pixman to pixman-0.28.2,
but the change was reverted later by 7b1b5d19.
This patch updates internal copy of pixman to pixman-0.32.6 to fix the
problem.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If memory allocation fails when using the -mem-prealloc command-line
option, QEMU exits without printing any error information to
the user:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
# echo $?
1
This commit adds an error message, so that we print instead:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
qemu: unable to map backing store for hugepages: Cannot allocate memory
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
target-arm:
* add "linux,stdout-path" to the virt DTB
* fix a long standing bug with IRQ disabling on Cortex-M CPUs
* implement input interrupt logic in the PL061
* fix failure to load correct SP/PC on reset of Cortex-M CPUs
if the vector table is not in a ROM-blob-in-RAM
* provide flash devices for boot ROMs in the virt board
* implement architectural watchpoints
* fix misimplementation of Inner Shareable TLB operations that
caused instability of guests in TCG SMP configurations
* configure PL011 and PL031 in the virt board correctly with
level-triggered interrupts rather than edge-triggered
* support providing a device tree blob to ROM (firmware)
images as well as to kernels
# gpg: Signature made Fri 12 Sep 2014 14:19:08 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140912: (23 commits)
hw/arm/boot: enable DTB support when booting ELF images
hw/arm/boot: load device tree to base of DRAM if no -kernel option was passed
hw/arm/boot: pass an address limit to and return size from load_dtb()
hw/arm/boot: load DTB as a ROM image
hw/arm/virt: fix pl011 and pl031 irq flags
target-arm: Make *IS TLB maintenance ops affect all CPUs
target-arm: Push legacy wildcard TLB ops back into v6
target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0
target-arm: Remove comment about MDSCR_EL1 being dummy implementation
target-arm: Set DBGDSCR.MOE for debug exceptions taken to AArch32
target-arm: Implement handling of fired watchpoints
target-arm: Move extended_addresses_enabled() to internals.h
target-arm: Implement setting of watchpoints
cpu-exec: Make debug_excp_handler a QOM CPU method
exec.c: Record watchpoint fault address and direction
exec.c: Provide full set of dummy wp remove functions in user-mode
exec.c: Relax restrictions on watchpoint length and alignment
hw/arm/virt: Provide flash devices for boot ROMs
target-arm: Fix broken indentation in arm_cpu_reest()
target-arm: Fix resetting issues on ARMv7-M CPUs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ARM architecture defines that the "IS" variants of TLB
maintenance operations must affect all TLBs in the Inner Shareable
domain, which for us means all CPUs. We were incorrectly implementing
these to only affect the current CPU, which meant that SMP TCG
operation was unstable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-3-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
When we implemented ARMv8 in QEMU we retained our legacy loose
wildcarded decoding of the TLB maintenance operations for v7
and earlier CPUs and provided the correct stricter decode for
v8. However the loose decode is in fact wrong for v7MP, because
it doesn't correctly implement the operations which must apply
to every CPU in the Inner Shareable domain.
Move the legacy wildcarding from the not_v8 reginfo array
into the not_v7 array, and move the strictly decoded operations
from the v8 reginfo to v7 or v7mp arrays as appropriate.
Cache and TLB lockdown legacy wildcarding remains in the
not_v8 array for the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Implement debug registers DBGVCR, OSDLR_EL1 and MDCCSR_EL0
(as dummy or limited-functionality). 32 bit Linux kernels will
access these at startup so they are required for breakpoints
and watchpoints to be supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MDSCR_EL1 has actual functionality now; remove the out of date
comment that claims it is a dummy implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For debug exceptions taken to AArch32 we have to set the
DBGDSCR.MOE (Method Of Entry) bits; we can identify the
kind of debug exception from the information in
exception.syndrome.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the utility function extended_addresses_enabled() into
internals.h; we're going to need to call it from op_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement support for setting QEMU watchpoints based on the
values the guest writes to the ARM architected watchpoint
registers. (We do not yet report the firing of the watchpoints
to the guest, so they will just be ignored.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we check whether we've hit a watchpoint we know the address
that we were attempting to access and whether it was a read or a
write. Record this information in the CPUWatchpoint struct so that
target-specific code can report it to the guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We already provide dummy versions of the cpu_watchpoint_insert
and cpu_watchpoint_remove_all functions when CONFIG_USER_ONLY
is defined. Complete the set by providing cpu_watchpoint_remove
and cpu_watchpoint_remove_by_ref as well.
This allows target-* code using these functions to avoid
some ifdeffery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1409930126-28449-2-git-send-email-ard.biesheuvel@linaro.org
This patch adds the missing input interrupt logic to the pl061 GPIO device. To
keep the floating output pins to stay high, the old state variable had to be
split into two separate ones for input and output - which brings the vmstate
version to 3.
Edge level interrupts and I/O were tested under Linux 3.14. Level interrupt
handling hasn't been tested.
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Message-id: 54024FD2.9080204@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct an error in the logic for deciding whether we can
take an IRQ interrupt which meant that on M profile cores
it was never possible to disable them.
The design here is still bogus in that M profile doesn't
have separate "IRQ" and "FIQ", which are an A/R profile
concept; we should ideally implement the proper priority
based scheme.
Signed-off-by: David Hoover <spm@boiteauxlettres.sent.at>
[PMM: Wrote a proper commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make sure to pass the correct fd via SCM_RIGHTS in socket_scm_helper.c
(i.e. fd_to_send, not socket-fd).
Signed-off-by: Stratos Psomadakis <psomas@grnet.gr>
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some device models, the guest can prevent unplug. Some users need a
way to forcibly revoke device model access to the block backend then, so
the underlying images can be safely used for something else.
drive_del lets you do that. Unfortunately, it conflates revoking access
with destroying the backend.
Commit 9063f81 made drive_del immediately destroy the root BDS. Nice:
the device name becomes available for reuse immediately. Not so nice:
the device model's pointer to the root BDS dangles, and we're prone to
crash when the memory gets reused.
Commit d22b2f4 fixed that by hiding the root BDS instead of destroying
it. Destruction only happens on unplug. "Hiding" means removing it
from bdrv_states and graph_bdrv_states; see bdrv_make_anon().
This "destroy on revoke" is a misfeature we don't want to carry
forward to blockdev-add, just like "destroy on unplug" (commit
2d246f0). So make drive_del fail on anything added with blockdev-add.
We'll add separate QMP commands to revoke device model access and to
destroy backends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BLOCK_IO_ERROR events are logged by libvirt, which helps with
post mortem analysis of guests. However, one information that
we miss today is a human readable string describing the cause
of the I/O error.
This commit adds that string it to BLOCK_IO_ERROR. Note that
this string is a debugging aid for humans, meaning that it
should not parsed by applications.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3718d8ab65 ("block: Replace in_use
with operation blocker") broke the error path because it consumed
local_err instead of propagating it.
The caller has no way to know that the function failed. This caused
virtio-blk to start "successfully" even though there was a fatal
dataplane error.
Steps to reproduce:
$ qemu-system-x86_64 -enable-kvm -object iothread,id=iothread0 \
-drive if=none,id=drive0,file=a.img \
(qemu) drive_mirror drive0 /tmp/foo.img
(qemu) device_add virtio-blk-pci,iothread=iothread0,drive=drive0
Expected result:
Since the mirror block job is using drive0 it is not possible to start
virtio-blk data-plane.
device_add fails and the PCI adapter is not added.
Actual result:
device_add completes and the PCI adapter is added.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch initializes monitor for gdbstub with the qemu_chr_alloc function
instead of just allocating the memory. Initialization function call
is required, because it also creates chr_write_lock mutex, which is used
when writing to this character device.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds outport to VMState to allow correct saving and restoring
the state of PC keyboard controller.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds irq_reinject_on_ack_count field to VMState to allow correct
saving/loading the state of MC146818 RTC.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch avoids setting an irq while loading the state of the ISA bridge.
Because the i8259 has not been deserialized yet, raising an interrupt
could bring the system out-of-sync with the migration source. For example,
the migration source could have masked the interrupt in the i8259. On the
destination, the i8259 device model would not know that yet and would
trigger an interrupt in the CPU.
This patch eliminates setting the irq and just restores the calculated
state fields in post_load function. Interrupt state will be deserialized
separately through the IRR field of the i8259.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some fields were added to VMState by this patch to preserve correct
loading of the serial port controller state.
Updating FCR value while loading was also modified to disable generating
an interrupt by loadvm.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ticks and clock offset used by CPU timers have to be saved in vmstate.
But vmstate for these fields registered only in icount mode.
Missing registration leads to breaking the continuity when vmstate is loaded.
This patch introduces new initialization function which fixes this.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch postpones vapic_paddr initialization, which is performed
during migration. When vapic_paddr is synchronized within the migration
process, apic_common functions could operate with incorrect apic state,
if it hadn't loaded yet. This patch postpones the synchronization until
the virtual machine is started, ensuring that the whole virtual machine
state has been loaded.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run resize grow test to ensure that existing data
is not lost during grow and new space is zeroed.
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The plan is to add new accounting metrics (latency, invalid requests, failed
requests, queue depth) and block.c is overpopulated so it will be better to work
in a separate module.
Moreover the long term plan is to have statistics in each of the BDS of the graph
for metrology purpose; this means that the device model statistics must move from
the topmost BDS to the device model.
So we need to decouple the statistic code from BlockDriverState.
This is another argument for the extraction of the code in a separate module.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Benoit Canet <benoit@irqsave.net>
CC: Fam Zheng <famz@redhat.com>
CC: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set the IDE MMIO memory type to little endian. The ATA specs identify
words part of the control commands encoded as little endian.
While this has no impact on little endian systems, it's required for big
endian systems(eg OpenRisc).
Signed-off-by: Valentin Manea <valentin.manea@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dragging block_int.h into a header is *not* nice. Fortunately, this
is the only offender.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Error object was leaked after failed bdrv_new(). While there,
streamline control flow a bit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 6db9560 split off the growable case so it can use
bdrv_file_open() instead of bdrv_open() then. Growable BDSes become
anonymous. Weird.
Commit 2e40134 folded bdrv_file_open() back into bdrv_open() with new
flag BDRV_O_PROTOCOL. We still have two bdrv_open() calls, and
growable BDSes remain anonymous.
Circle back to before commit 6db9560: just one call, not anonymous.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cpu_to_be32() is wrong since vhd_type is an enum constant
(just a regular CPU-endian integer).
Signed-off-by: Xiaodong Gong <gordongong0350@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Management software, such as RHEV's vdsm, want to be able to allocate
disk space on demand. The basic use case is to start a VM with a small
disk and then the disk is enlarged when QEMU hits a ENOSPC condition.
To this end, the management software has to be notified when QEMU
encounters ENOSPC. The solution implemented by this commit is simple:
it extends the BLOCK_IO_ERROR with a 'nospace' key, which is true
when QEMU is stopped due to ENOSPC.
Note that support for querying this event is already present in
query-block by means of the 'io-status' key. Also, the new 'nospace'
BLOCK_IO_ERROR field shares the same semantics with 'io-status',
which basically means that werror= has to be set to either
'stop' or 'enospc' to enable 'nospace'.
Finally, this commit also updates the 'io-status' key doc in the
schema with a list of supported device models.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add back the PCIe config capabilities on XHCI cards in non-PCIe slots,
but only for machine types before 2.1.
This fixes a migration incompatibility in the XHCI PCI devices
caused by:
058fdcf52c - xhci: add endpoint cap on express bus only
Note that in fixing it for compatibility with older QEMUs, it breaks
compatibility with existing QEMU 2.1's on older machine types.
The status before this patch was (if it used an XHCI adapter):
machine type | source qemu
any pre-2.1 - FAIL
any 2.1... - PASS
With this patch:
machine type | source qemu
any pre-2.1 - PASS
pre-2.1 2.1... - FAIL
2.1 2.1... - PASS
A test to trigger it is to add '-device nec-usb-xhci,id=xhci,addr=0x12'
to the command line.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add parameter errp to gethugepagesize thus callers can handle errors.
If user adds a memory-backend-file object using object_add command,
specifying a non-existing directory for property mem-path, qemu will
core dump with message:
/nonexistingdir: No such file or directory
Bad ram offset fffffffffffff000
Aborted (core dumped)
This patch fixes the problem. With this patch, qemu reports an error
message like:
qemu-system-x86_64: -object memory-backend-file,mem-path=/nonexistingdir,id=mem-file0,size=128M:
failed to get page size of file /nonexistingdir: No such file or directory
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report an error when memory < hpagesize in file_ram_alloc() so callers
can handle the error.
If user adds a memory-backend-file object using object_add command,
specifying a size that is less than huge page size, qemu will core dump
with message:
Bad ram offset fffffffffffff000
Aborted (core dumped)
This patch fixes the problem. With this patch, qemu reports error
message like:
qemu-system-x86_64: -object memory-backend-file,mem-path=/hugepages,id=mem-file0,size=1M: memory
size 0x100000 must be equal to or larger than huge page size 0x200000
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using monitor command object_add to add a memory backend whose
size is way too big to allocate memory for it, qemu just exits. In
the case we'd better give an error message and keep guest running.
The problem can be reproduced as follows:
1. run qemu
2. (monitor)object_add memory-backend-ram,size=100000G,id=ram0
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add parameter errp to memory_region_init_rom_device and update all call
sites to propagate the error.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Propagate the error out of realize. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr so that
we can handle errors.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Assert ptr != NULL in memory_region_init_ram_ptr. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes an issue with module build system. block/iscsi.so is
currently broken:
$ ~/build/last/qemu-img
Failed to open module: /home/fam/build/master/block-iscsi.so:
undefined symbol: qmp_query_uuid
qemu-img: Not enough arguments
Try 'qemu-img --help' for more information
To fix this, we should (at least) let qemu-img link qmp_query_uuid from
libqemustub.a. (There are a few other symbols missing, as well.)
This patch changes the linking rules to:
1) Build ".mo" with "ld -r -o $@ $^" for each ".so", and later build .so
with it.
2) Always build all the .mo before linking the executables. This is
achieved by adding those .mo files to the executables' "-y"
variables.
3) When linking an executable, those .mo files in its "-y" variables are
filtered out, and replaced by one or more -Wl,-u,$symbol flags. This
is done in the added macro "process-archive-undefs".
These "-Wl,-u,$symbol" flags will force ld to pull in the function
definition from the archives when linking.
Note that the .mo objects, that are actually meant to be linked in
the executables, are already expanded in unnest-vars, before the
linking command. So we are safe to simply filter out .mo for the
purpose of pulling undefined symbols.
process-archive-undefs works as this: For each ".mo", find all the
undefined symbols in it, filter ones that are defined in the
archives. For each of these symbols, generate a "-Wl,-u,$symbol" in
the link command, and put them before archive names in the command
line.
Suggested-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just go to the internal error runstate. This lets you use the "x",
"dump-guest-memory" or "info register" commands.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both OpenBSD and FreeBSD SPARC64 attempt to read the interrupt map from the
hardware and will fail if the correct ino isn't present.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Block pull request
# gpg: Signature made Mon 08 Sep 2014 11:49:31 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (24 commits)
ide: Add resize callback to ide/core
IDE: Fill the IDENTIFY request consistently
vmdk: fix buf leak in vmdk_parse_extents()
vmdk: fix vmdk_parse_extents() extent_file leaks
ide: Add wwn support to IDE-ATAPI drive
qtest/ide: Uninitialize PC allocator
libqos: add a simple first-fit memory allocator
MAINTAINERS: update sheepdog maintainer
qemu-nbd: fix indentation and coding style
qemu-nbd: add option to set detect-zeroes mode
rename parse_enum_option to qapi_enum_parse and make it public
block/archipelago: Use QEMU atomic builtins
qemu-img: fix rebase src_cache option documentation
qemu-img: clarify src_cache option documentation
libqos: Added EVENT_IDX support
libqos: Added MSI-X support
libqos: Added test case for configuration changes in virtio-blk test
libqos: Added indirect descriptor support to virtio implementation
libqos: Added basic virtqueue support to virtio implementation
tests: Add virtio device initialization
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patch queue for ppc - 2014-09-08
Alexander Graf (11):
PPC: KVM: Fix g3beige and mac99 when HV is loaded
PPC: mac99: Move NVRAM to page boundary when necessary
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
PPC: KVM: Use vm check_extension for pv hcall
PPC: mac99: Fix core99 timer frequency
PPC: mac_nvram: Remove unused functions
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: Mac: Move tbfreq into local variable
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Fix default config ordering and add eTSEC for ppc64
Alexey Kardashevskiy (7):
spapr: Move DT memory node rendering to a helper
spapr: Use DT memory node rendering helper for other nodes
spapr: Refactor spapr_populate_memory() to allow memoryless nodes
spapr: Split memory nodes to power-of-two blocks
spapr: Add a helper for node0_size calculation
spapr: Fix ibm, associativity for memory nodes
spapr_pci: Fix config space corruption
Anton Blanchard (2):
spapr-vlan: Don't touch last entry in buffer list
hypervisor property clashes with hypervisor node
Benjamin Herrenschmidt (2):
loader: Add load_image_size() to replace load_image()
spapr: Locate RTAS and device-tree based on real RMA
Bharat Bhushan (4):
ppc: debug stub: Get trap instruction opcode from KVM
ppc: synchronize excp_vectors for injecting exception
ppc: Add software breakpoint support
ppc: Add hw breakpoint watchpoint support
Gonglei (1):
spapr: fix possible memory leak
Greg Kurz (1):
spapr_pci: map the MSI window in each PHB
Nikunj A Dadhania (3):
ppc: spapr-rtas - implement os-term rtas call
spapr: add uuid/host details to device tree
ppc/spapr: Fix MAX_CPUS to 255
Peter Maydell (1):
hw/ppc/spapr_hcall.c: Fix typo in function names
Tom Musta (20):
linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame
linux-user: Split PPC Trampoline Encoding from Register Save
linux-user: Enable Signal Handlers on PPC64
linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer
linux-user: Implement do_setcontext for PPC64
linux-user: Handle PPC64 ELFv2 Function Pointers
target-ppc: Bug Fix: rlwinm
target-ppc: Bug Fix: rlwnm
target-ppc: Bug Fix: rlwimi
target-ppc: Bug Fix: mullwo
target-ppc: Bug Fix: mullw
target-ppc: Bug Fix: mulldo OV Detection
target-ppc: Bug Fix: srawi
target-ppc: Bug Fix: srad
target-ppc: Special Case of rlwimi Should Use Deposit
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Clean Up mullw
target-ppc: Clean up mullwo
target-ppc: Implement mulldo with TCG
# gpg: Signature made Mon 08 Sep 2014 11:51:15 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (52 commits)
hypervisor property clashes with hypervisor node
PPC: Fix default config ordering and add eTSEC for ppc64
spapr_pci: map the MSI window in each PHB
target-ppc: Implement mulldo with TCG
target-ppc: Clean up mullwo
target-ppc: Clean Up mullw
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Special Case of rlwimi Should Use Deposit
spapr-vlan: Don't touch last entry in buffer list
spapr_pci: Fix config space corruption
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Mac: Move tbfreq into local variable
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Remove unused functions
PPC: mac99: Fix core99 timer frequency
PPC: KVM: Use vm check_extension for pv hcall
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
target-ppc: Bug Fix: srad
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dtc fails on a recent QEMU snapshot:
ERROR (name_properties): "name" property in /hypervisor#1 is incorrect ("hypervisor" instead of base node name)
Looking at the device tree we have a hypervisor property:
# lsprop hypervisor
hypervisor "kvm"
But we also have a hypervisor node, with a name that doesn't match:
# lsprop hypervisor#1/
name "hypervisor"
compatible "linux,kvm"
linux,phandle 7e5eb5d8 (2120136152)
Commit c08ce91d309c (spapr: add uuid/host details to device tree)
looks to have collided with an earlier patch. Remove the hypervisor
property.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
We messed up the ordering in our default configs for PPC. The top entries
are generic entries, then come sections that indicate that features are only
in because of a special feature (such as PReP).
Fix the ordering again and while at it add eTSEC support to the ppc64 target
so that we can spawn eTSEC adapters with qemu-system-ppc64.
Signed-off-by: Alexander Graf <agraf@suse.de>
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Optimize mulldo by using the muls2_i64 operation rather than a helper. Eliminate
the obsolete helper code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Simplify the implementation of mullwo. For 64 bit CPUs, the result is
the concatenation of the upper and lower parts of the muls2_i32 operation,
which may be slightly better than deposit. For 32 bit CPUs, the lower part
of the muls_i32 operation is moved into the target GPR.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the unecessary ext32s TCG operation and make the multiplication
operation explicitly 32 bit.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Optimize the special case of rlwnm where MB=0 and ME=31. This can
be implemented using a ROTL.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Optimize the special case of rlwinm where MB=0 and ME=31. This can
be implemented as a 32-bit ROTL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The special case of rlwimi where MB <= ME and SH = 31-ME can be implemented
with a single TCG deposit operation. This replaces the less general case
of SH = MB = 0 and ME = 31.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The last 8 bytes of the buffer list is defined to contain the number
of dropped frames. At the moment we use it to store rx entries,
which trips up ethtool -S:
rx_no_buffer: 9223380832981355136
Fix this by skipping the last buffer list entry.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made
if MSI or MSIX is actually supported and the MSI message was reset
unconditionally. If this happened on a device which does not support MSI
(but does support MSIX, otherwise "ibm,change-msi" would not be called),
this device would have PCIDevice::msi_cap field (MSI capability offset)
set to zero and writing a vector would actually clear PCI status.
This clears MSI message only if MSI or MSIX is present on a device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X calibrates a number of frequencies on bootup based on reading
tb values on bootup and comparing them to via cuda timer values.
The only variable we can really steer well (thanks to KVM) is the cuda
frequency. So let's use that one to fake Mac OS X into believing the
bus frequency is tbfreq * 4. That way Mac OS X will automatically
calculate the correct timebase frequency.
With this patch and the patch set I posted earlier I can successfully
run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
We already expose the real CPU's tb frequency to the guest via fw_cfg. Soon
we will need to also expose it to the MacIO, so let's move it to a variable
that we can leverage every time we need the frequency.
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X (at least with -M mac99) searches for a valid NVRAM partition
of a special Apple type. If it can't find that partition in the first
half of NVRAM, it will look at the second half.
There are a few implications from this. The first is that we need to
split NVRAM into 2 halves - one for Open Firmware use, the other one for
Mac OS X. Without this split Mac OS X will just loop endlessly over the
second half trying to find a partition.
The other implication is that we should provide a specially crafted Mac
OS X compatible NVRAM partition on the second half that Mac OS X can
happily use as it sees fit.
Signed-off-by: Alexander Graf <agraf@suse.de>
The NVRAM in our Core99 machine really supports 2byte and 4byte accesses
just as well as 1byte accesses. In fact, Mac OS X uses those.
Add support for higher register size granularities.
Signed-off-by: Alexander Graf <agraf@suse.de>
There is a special timer in the mac99 machine that we recently started
to emulate. Unfortunately we emulated it in the wrong frequency.
This patch adapts the frequency Mac OS X uses to evaluate results from
this timer, making calculations it bases off of it work.
Signed-off-by: Alexander Graf <agraf@suse.de>
To find out whether we support the KVM hypercall interface we need to ask KVM
on the VM level rather than the global KVM level, because Book3S HV KVM does
not support it and we play conservative when both HV and PR are loaded.
So instead, use the VM helper that falls back to global KVM enumeration. That
should cover all cases.
Signed-off-by: Alexander Graf <agraf@suse.de>
We now can call KVM_CHECK_EXTENSION on the kvm fd or on the vm fd, whereas
the vm version is more accurate when it comes to PPC KVM.
Add a helper to make the vm version available that falls back to the non-vm
variant if the vm one is not available yet to stay compatible.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the check for carry in the srad helper to properly construct
the mask -- a "1ULL" must be used (instead of "1") in order to
get the desired result.
Example:
R3 8000000000000000
R4 F3511AD4A2CD4C38
srad 3,3,4
Should *not* set XER[CA] but does without this patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For 64 bit implementations, the special case of a shift by zero
should result in the sign extension of the least significant 32 bits
of the source GPR (not a direct copy of the 64 bit source GPR).
Example:
R3 A6212433228F41DC
srawi 3,3,0
R3 expected : 00000000228F41DC
R3 actual : A6212433228F41DC (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the code to properly detect overflow; the 128 bit signed
product must have all zeroes or all ones in the first 65 bits
otherwise OV should be set.
Example:
R3 45F086A5D5887509
R4 0000000000000002
mulldo 3,3,4
Should set XER[OV].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For 64-bit implementations, the mullw result is the 64 bit product
of the sign-extended least significant 32 bits of the source
registers.
Fix the code to properly sign extend the source operands and produce
a 64 bit product.
Example:
R3 00000000002F37A0
R4 41C33D242F816715
mullw 3,3,4
R3 expected : 0008C3146AE0F020
R3 actual : 000000006AE0F020 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On 64-bit implementations, the mullwo result is the 64 bit product of
the signed 32 bit operands. Fix the implementation to properly deposit
the upper 32 bits into the target register.
Example:
R3 0407DED115077586
R4 53778DF3CA992E09
mullwo 3,3,4
R3 expected : FB9D02730D7735B6
R3 actual : 000000000D7735B6 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwimi specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Also fix the special case of MB=31 and ME=0 to copy the entire contents
of the source GPR.
Examples:
R3 FFFFFFFFFFFFFFF0
rlwimi 3,3,29,14,1
R3 expected : 1FFFFFFE3FFFFFFE
R3 actual : 000000003FFFFFFE (without this patch)
R3 ED7EB4DD824F0853
rlwimi 3,3,10,31,0
R3 expected : 3C214E09024F0853
R3 actual : 00000000024F0853 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwnm specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Example:
R3 = 0000000000000002
R4 = 7FFFFFFFFFFFFFFF
rlwnm 3,3,4,31,16
R3 expected : 0000000100000001
R3 actual : 0000000000000001 (without this patch)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The rlwinm specification includes the ROTL32 operation, which is defined
to be a left rotation of two copies of the least significant 32 bits of
the source GPR.
The current implementation is incorrect on 64-bit implementations in that
it rotates a single copy of the least significant 32 bits, padding with
zeroes in the most significant bits.
Fix the code to properly implement this ROTL32 operation.
Example:
R3 = F7487D82EC6F75DF
rlwinm 3,3,5,12,4
R3 expected : 8DEEBBFD880EBBFD
R3 actual : 00000000880EBBFD (without this fix)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
MAX_CPUS 256 is inconsistent with qemu supporting upto 255 cpus. This
MAX_CPUS number was percolated back to "virsh capabilities" with wrong
max_cpus.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds hardware breakpoint and hardware watchpoint support
for ppc.
On BOOKE architecture we cannot share debug resources between QEMU
and guest because:
When QEMU is using debug resources then debug exception must
be always enabled. To achieve this we set MSR_DE and also set
MSRP_DEP so guest cannot change MSR_DE.
When emulating debug resource for guest we want guest
to control MSR_DE (enable/disable debug interrupt on need).
So above mentioned two configuration cannot be supported
at the same time. So the result is that we cannot share
debug resources between QEMU and Guest on BOOKE architecture.
In the current design QEMU gets priority over guest,
this means that if QEMU is using debug resources then guest
cannot use them and if guest is using debug resource then
qemu can overwrite them.
When QEMU is not able to handle debug exception then we inject program
exception to guest. Yes program exception NOT debug exception and the
reason is:
1) QEMU and guest not sharing debug resources
2) For software breakpoint QEMU uses a ehpriv-1 instruction;
So there cannot be any reason that we are in qemu with exit reason
KVM_EXIT_DEBUG for guest set debug exception, only possibility is
guest executed ehpriv-1 privilege instruction and that's why we are
injecting program exception.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch allow insert/remove software breakpoint.
When QEMU is not able to handle debug exception then we inject
program exception to guest because for software breakpoint QEMU
uses a ehpriv-1 instruction;
So there cannot be any reason that we are in qemu with exit reason
KVM_EXIT_DEBUG for guest set debug exception, only possibility is
guest executed ehpriv-1 privilege instruction and that's why we are
injecting program exception.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
[agraf: make deflect comment booke/book3s agnostic]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch synchronizes env->excp_vectors[] with env->iovr[].
This is required for using the existing interrupt injection mechanism
for kvm.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Get trap instruction opcode from KVM and this opcode will
be used for setting software breakpoint in following patch
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We currently calculate the final RTAS and FDT location based on
the early estimate of the RMA size, cropped to 256M on KVM since
we only know the real RMA size at reset time which happens much
later in the boot process.
This means the FDT and RTAS end up right below 256M while they
could be much higher, using precious RMA space and limiting
what the OS bootloader can put there which has proved to be
a problem with some OSes (such as when using very large initrd's)
Fortunately, we do the actual copy of the device-tree into guest
memory much later, during reset, late enough to be able to do it
using the final RMA value, we just need to move the calculation
to the right place.
However, RTAS is still loaded too early, so we change the code to
load the tiny blob into qemu memory early on, and then copy it into
guest memory at reset time. It's small enough that the memory usage
doesn't matter.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
A subsequent patch to ppc/spapr needs to load the RTAS blob into
qemu memory rather than target memory (so it can later be copied
into the right spot at machine reset time).
I would use load_image() but it is marked deprecated because it
doesn't take a buffer size as argument, so let's add load_image_size()
that does.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
We want the associtivity lists of memory and CPU nodes to match but
memory nodes have incorrect domain#3 which is zero for CPU so they won't
match.
This clears domain#3 in the list to match CPUs associtivity lists.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
In multiple places there is a node0_size variable calculation
which assumes that NUMA node #0 and memory node #0 are the same
things which they are not. Since we are going to change it and
do not want to change it in multiple places, let's make a helper.
This adds a spapr_node0_size() helper and makes use of it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Linux kernel expects nodes to have power-of-two size and
does WARN_ON if this is not the case:
[ 0.041456] WARNING: at drivers/base/memory.c:115
which is:
===
/* Validate blk_sz is a power of 2 and not less than section size */
if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) {
WARN_ON(1);
block_sz = MIN_MEMORY_BLOCK_SIZE;
}
===
This splits memory nodes into set of smaller blocks with
a size which is a power of two. This makes sure the start
address of every node is aligned to the node size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: squash windows compile fix in]
Signed-off-by: Alexander Graf <agraf@suse.de>
Current QEMU does not support memoryless NUMA nodes, however
actual hardware may have them so it makes sense to have a way
to emulate them in QEMU. This prepares SPAPR for that.
This moves 2 calls of spapr_populate_memory_node() into
the existing loop over numa nodes so first several nodes may
have no memory and this still will work.
If there is no numa configuration, the code assumes there is just
a single node at 0 and it has all the guest memory.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This finishes refactoring by using the spapr_populate_memory_node helper
for all nodes and removing leftovers from spapr_populate_memory().
This is not a part of the previous patch because the patches look
nicer apart.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves recurring bits of code related to memory@xxx nodes
creation to a helper.
This makes use of the new helper for node@0.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
When running KVM we have to adhere to host page boundaries for memory slots.
Unfortunately the NVRAM on mac99 is a 4k RAM hole inside of an MMIO flash
area.
So if our host is configured with 64k page size, we can't use the mac99 target
with KVM. This is a real shame, as this limitation is not really an issue - we
can easily map NVRAM somewhere else and at least Linux and Mac OS X use it
at their new location.
So in that emergency case when it's about failing to run at all and moving NVRAM
to a place it shouldn't be at, choose the latter.
This patch enables -M mac99 with KVM on 64k page size hosts.
Signed-off-by: Alexander Graf <agraf@suse.de>
Useful for identifying the guest/host uniquely within the
guest. Adding following properties to the guest root node.
vm,uuid - uuid of the guest
host-model - Host model number
host-serial - Host machine serial number
hypervisor type - Tells its "kvm"
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a typo in the names of a couple of functions
(s/resouce/resource/).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal)
entry point addresses. However, when invoking a function via a function
pointer, GPR 12 must also be set to this address so that the TOC may be
handled properly.
Add this support to the invocation of a signal handler.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The
implementation re-uses the existing TARGET_PPC32 code with the only change
being the computation of the address of the register save area.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers.
On this platform, function pointers are pointers to structures and the first 64
bits of such a structure contains the function's entry point. The second 64 bits
contains the TOC pointer, which must be placed into GPR 2.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable the 64-bit PowerPC signal handling code that was previously
disabled via #ifdefs. Specifically:
- Move the target_mcontext (register save area) structure and
append it to the 64-bit target_sigcontext structure. This
provides the space on the stack for saving and restoring
context.
- Define the target_rt_sigframe for 64-bit.
- Adjust the setup_frame and setup_rt_frame routines to properly
select the target_mcontext area and trampoline within the stack
frame; tthis is different for 32-bit and 64-bit implementations.
- Adjust the do_setcontext stub for 64-bit so that it compiles
without warnings.
The 64-bit signal handling code is still not functional after this
change; but the 32-bit code is. Subsequent changes will address
specific issues with the 64-bit code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix build on 32bit hosts, ppc64abi32]
Signed-off-by: Alexander Graf <agraf@suse.de>
Split the encoding of the PowerPC sigreturn trampoline from the saving of
register state onto the signal handler stack. This will make it easier
in subsequent patches to deal with variations in the stack frame layouts between
32 and 64 bit PowerPC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code that sets the stack frame back pointer is incorrect for
the setup_rt_frame() code; qemu will abort (SIGSEGV) in some
environments. The setup_frame code was fixed in commit
beb526b121 but the setup_rt_frame
code was not.
Make the setup_rt_frame code consistent with the setup_frame
code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR compliant guest calls this in absence of kdump. This finally
reaches the guest and can be handled according to the policies set by
higher level tools(like taking dump) for further analysis by tools like
crash.
Linux kernel calls ibm,os-term when extended property of os-term is set.
This makes sure that a return to the linux kernel is gauranteed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[agraf: reduce RTAS_TOKEN_MAX]
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC we have 2 different styles of KVM: PR and HV. HV can only virtualize
sPAPR guests while PR can virtualize everything that's reasonably close to
the host hardware platform.
As long as only one kernel module (PR or HV) is loaded, the "default" kvm type
is the module that's loaded. So if your hardware only supports PR mode you can
easily spawn a Mac VM.
However, if both HV and PR are loaded we default to HV mode. And in that case
the Mac machines have to explicitly ask for PR mode to get a working VM.
Fix this up by explicitly having the Mac machines ask for PR style KVM. This
fixes bootup of Mac VMs on systems where bot HV and PR kvm modules are loaded
for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, if the block device backing the IDE drive is resized,
the information about the device as cached inside of the IDEState
structure is not updated, thus when a guest OS re-queries the drive,
it is unable to see the expanded size.
This patch adds a resize callback that updates the IDENTIFY data
buffer in order to correct this.
Lastly, a Linux guest as-is cannot resize a libata drive while in-use,
but it can see the expanded size as part of a bus rescan event.
This patch also allows guests such as Linux to see the new drive size
after a soft reboot event, without having to exit the QEMU process.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
IDE-HD, IDE-ATAPI and IDE-CFATA all fill the
identify buffer in slightly different ways,
this is a relatively minor patch to make them
uniform, to emphasize that:
(1) We build the s->identify_data cache first, then
(2) We copy it to s->io_buffer to fulfill the request.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vmdk_open_sparse() does not take ownership of buf so the caller always
needs to free it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Although it is possible to specify the wwn
property for cdrom devices on the command line,
the underlying driver fails to relay this information
to the guest operating system via IDENTIFY.
This is a simple patch to correct that.
See ATA8-ACS, Table 22 parts 5, 6, and 9.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new call to pc_alloc_uninit
as a test for the new pathways.
The leak checking / assert pathways are
not enabled in this patch, leaving this
as an option to future test writers.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement a simple first-fit memory allocator that
attempts to keep track of leased blocks of memory
in order to be able to re-use blocks.
Additionally, allow the user to specify when
initializing the device that upon cleanup,
we would like to assert that there are no
blocks in use. This may be useful for identifying
problems in qtests that use more complicated
set-up and tear-down routines.
This functionality is used in my upcoming ahci-test v2
patch set, but I didn't see fit to enable it for any
existing tests, which will continue to operate the
same as they have prior.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace __sync builtins with ones provided by QEMU
for atomic operations.
Special thanks goes to Paolo Bonzini for his refactoring
suggestion in order to use the already existing atomic builtins
interface.
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The src_cache option (-T) specifies the cache mode for backing files.
It applies both the image's old backing file as well as the new backing
file:
ret = bdrv_open(&bs_old_backing, backing_name, NULL, NULL, src_flags,
old_backing_drv, &local_err);
if (ret) {
...
}
if (out_baseimg[0]) {
bs_new_backing = bdrv_new("new_backing", &error_abort);
ret = bdrv_open(&bs_new_backing, out_baseimg, NULL, NULL, src_flags,
new_backing_drv, &local_err);
if (ret) {
...
}
}
The documentation only mentions the new backing file but it really
applies to both.
Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The source cache option takes the same values as the cache option. The
documentation reads a little strange because it starts with "In contrast
the src_cache option ...". The fact that this is comparing with the
previous documented option (the 'cache' option) is implicit. Readers
may be confused, especially if they jump to src_cache without reading
cache documentation first.
Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Added avail_event and NO_NOTIFY check before notifying.
Added used_event setting.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Added MSI-X support for qtest PCI.
Added MSI-X support for virtio-pci.
Added MSI-X test case in virtio-blk-test.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add status changing and feature negotiation.
Add basic virtqueue support for adding and sending virtqueue requests.
Add ISR checking.
[Squashed request endianness fix by Greg Kurz <gkurz@linux.vnet.ibm.com>
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions to read and write virtio header fields.
Add status bit setting in virtio-blk-device.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Virtio header has been changed to compile and work with a real device.
Functions bus_foreach and device_find have been implemented for PCI.
Virtio-blk test case now opens a fake device.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A drive that backs a pflash device is special:
- it is very small,
- its entire contents are kept in a RAMBlock at all times, covering the
guest-phys address range that provides the guest's view of the emulated
flash chip.
The pflash device model keeps the drive (the host-side file) and the
guest-visible flash contents in sync. When migrating the guest, the
guest-visible flash contents (the RAMBlock) is migrated by default, but on
the target host, the drive (the host-side file) remains in full sync with
the RAMBlock only if:
- the source and target hosts share the storage underlying the pflash
drive,
- or the migration requests full or incremental block migration too, which
then covers all drives.
Due to the special nature of pflash drives, the following scenario makes
sense as well:
- no full nor incremental block migration, covering all drives, alongside
the base migration (justified eg. by shared storage for "normal" (big)
drives),
- non-shared storage for pflash drives.
In this case, currently only those portions of the flash drive are updated
on the target disk that the guest reprograms while running on the target
host.
In order to restore accord, dump the entire flash contents to the bdrv in
a post_load() callback.
- The read-only check follows the other call-sites of pflash_update();
- both "pfl->ro" and pflash_update() reflect / consider the case when
"pfl->bs" is NULL;
- the total size of the flash device is calculated as in
pflash_cfi01_realize().
When using shared storage, or requesting full or incremental block
migration along with the normal migration, the patch should incur a
harmless rewrite from the target side.
It is assumed that, on the target host, RAM is loaded ahead of the call to
pflash_post_load().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QOM CPUState and X86CPU
* Include exception state in CPU VMState
* Fix -cpu *,migratable=foo
* Error out on unknown -cpu *,+foo,-bar
# gpg: Signature made Fri 05 Sep 2014 15:38:14 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-cpu-for-peter:
target-i386: Reject invalid CPU feature names on the command-line
target-i386: Support migratable=no properly
exec: Save CPUState::exception_index field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of simply printing a warning, report an error when invalid CPU
options are provided on the CPU model string.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.
Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
This patch adds a subsection with exception_index field to the VMState for
correct saving the CPU state.
Without this patch, simulator could miss the pending exception in the saved
virtual machine state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Related spice-only bug. We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card. It's also used with qxl in vga mode.
When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer. In theory the guest can write,
indirectly via spice-server. The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.
Fix that by switching to dynamic allocation for the buffer.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Plug a bunch of holes in the bochs dispi interface parameter checking.
Add a function doing verification on all registers. Call that
unconditionally on every register write. That way we should catch
everything, even changing one register affecting the valid range of
another register.
Some of the holes have been added by commit
e9c6149f6a. Before that commit the
maximum possible framebuffer (VBE_DISPI_MAX_XRES * VBE_DISPI_MAX_YRES *
32 bpp) has been smaller than the qemu vga memory (8MB) and the checking
for VBE_DISPI_MAX_XRES + VBE_DISPI_MAX_YRES + VBE_DISPI_MAX_BPP was ok.
Some of the holes have been there forever, such as
VBE_DISPI_INDEX_X_OFFSET and VBE_DISPI_INDEX_Y_OFFSET register writes
lacking any verification.
Security impact:
(1) Guest can make the ui (gtk/vnc/...) use memory rages outside the vga
frame buffer as source -> host memory leak. Memory isn't leaked to
the guest but to the vnc client though.
(2) Qemu will segfault in case the memory range happens to include
unmapped areas -> Guest can DoS itself.
The guest can not modify host memory, so I don't think this can be used
by the guest to escape.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VgaState->vram_size is the size of the pci bar. In case of qxl not the
whole pci bar can be used as vga framebuffer. Add a new variable
vbe_size to handle that case. By default (if unset) it equals
vram_size, but qxl can set vbe_size to something else.
This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results
and sanity checks are done with the correct size too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-09-04 08:22:48 +02:00
785 changed files with 40270 additions and 12277 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
