Query input device keys, initialize state accordingly, so the correct
state is reflected in case any key is pressed at initialization time.
There is a high chance for this to actually happen for the 'enter' key
in case you start qemu with a terminal command (directly or virsh).
When finding any pressed keys the input grab is delayed until all keys
are lifted, to avoid confusing guest and host with appearently stuck
keys.
Reported-by: Muted Bytes <mutedbytes@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1476277384-30365-1-git-send-email-kraxel@redhat.com
Most of the fields in VncState are initialized in the
vnc_connect() method, but some are done in vnc_init_state()
instead.
The purpose of having vnc_init_state() is to delay starting
of the VNC wire protocol until after the websockets handshake
has completed. As such the vnc_init_state() method only needs
to be used for initialization that is dependant on the wire
protocol running.
This also lets us get rid of the initialized boolean flag
from the VncState struct.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-9-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_init_state method calls reset_keys() to reset the
modifier key state. This was originally added in
commit 53762ddb27
Author: malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Mon Dec 1 20:57:52 2008 +0000
Reset the key modifiers upon client connect
This was valid at this time because there was only the
single VncState object which was persistent across client
connections and so needed resetting.
The persistent data was later split off into VncDisplay
and VncState was allocated at time of client connection:
commit 753b405331
Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Mon Feb 16 14:59:30 2009 +0000
Support multiple VNC clients (Brian Kress)
at which point the modifier state is always 0 due to
use of g_new0. As such the reset_keys() call has been
a no-op ever since.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-8-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Just before accepting a new client connection the vnc_listen_io
method calls graphic_hw_update(). This is bogus because there
is a call to this method already in vnc_state_init() and the
client doesn't need up2date graphics console before reaching
that.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-7-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a lot of repeated code in the auth type setup method,
particularly around checking TLS credential types. Refactor
it to reduce duplication and instead of having one method
do both plain and websockets at once, call it separately
for each.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-6-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'ws_enabled' field is never used outside of the
vnc_display_open method, so can be a local variable.
The 'enabled' field is easily replaced by a check
for whether 'lsock' is non-NULL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-3-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The last line in vnc_init_state() says
/* vs might be free()ed here */
This was added in
commit 198a0039c5
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Jun 16 14:19:48 2009 +0200
vnc: rework VncState release workflow.
because the preceeding 'vnc_update_client()' could indeed
release the VncState instance.
The call to vnc_update_client() was removed not long after
though in
commit 1fc624122f
Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Mon Aug 3 10:54:32 2009 +0100
single vnc server surface
and so the comment has been wrong ever since
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
various usb bugfixes
some xhci cleanups
# gpg: Signature made Wed 12 Oct 2016 13:38:27 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-usb-20161012-1:
usb-redir: allocate buffers before waking up the host adapter
usb: Fix incorrect default DMA offset.
usb: fix serial generator
xhci: make xhci_epid_to_usbep accept XHCIEPContext
xhci: drop XHCITransfer->{slotid,epid}
xhci: add & use xhci_kick_epctx()
xhci: drop XHCITransfer->xhci
xhci: use linked list for transfers
xhci: drop unused comp_xfer field
xhci: decouple EV_QUEUE from TD_QUEUE
xhci: limit the number of link trbs we are willing to process
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to make sure usb redirection is prepared to actually handle the
callback from the usb host adapter. Without this interrupt endpoints
don't work on xhci.
Note: On ehci the usb_wakeup() call only schedules a BH for the actual
work, which hides this bug because the allocation happens before ehci
calls back even without this patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
snprintf return value is *not* the number of chars written into the
buffer, but the number of chars needed. So in case the buffer is too
small you can go alloc a bigger one and try again. But that also means
you can't simply use the return value for the next snprintf call
without checking beforehand that things did actually fit.
Problem is that usb_desc_create_serial didn't perform that check, so a
loooong path string (can happen with deep pci-bridge nesting) results in
the third snprintf call smashing the stack.
Fix this by throwing out all the snpintf calls and use g_strdup_printf
instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1381630
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com
xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid. So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com
xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams. xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work. But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.
So remove static XHCITransfer array from XHCIEPContext. Use a linked
list instead, and allocate/free XHCITransfer as needed. Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs. That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.
New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com
EV_QUEUE must not change because an array of that size is part of live
migration data. Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com
# gpg: Signature made Wed 12 Oct 2016 09:43:03 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Add missing execution mode of guest events
trace: introduce a formal group name for trace events
trace: pass trace-events to tracetool as a positional param
trace: push reading of events up a level to tracetool main
trace: rename _read_events to read_events
trace: get rid of generated-events.h/generated-events.c
trace: dynamically allocate event IDs at runtime
trace: dynamically allocate trace_dstate in CPUState
trace: provide mechanism for registering trace events
trace: don't abort qemu if ftrace can't be initialized
trace: emit name <-> ID mapping in simpletrace header
trace: remove the TraceEventID and TraceEventVCPUID enums
trace: give each trace event a named TraceEvent struct
trace: break circular dependency in event-internal.h
trace: remove duplicate control.h includes in generated-tracers.h
trace: remove global 'uint16 dstate[]' array
trace: remove some now unused functions
trace: convert code to use event iterators
trace: add trace event iterator APIs
trace: move colo trace events to net/ sub-directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The declarations in the generated-tracers.h file are
assuming there's only ever going to be one instance
of this header, as they are not namespaced. When we
have one header per event group, if a single source
file needs to include multiple sets of trace events,
the symbols will all clash.
This change thus introduces a '--group NAME' arg to the
'tracetool' program. This will cause all the symbols in
the generated header files to be given a unique namespace.
If no group is given, the group name 'common' is used,
which is suitable for the current usage where there is
only one global trace-events file used for code generation.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.
The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of having the code generator assign event IDs and
event VCPU IDs, assign them when the events are registered
at runtime. This will allow code to be generated from
individual trace-events without having to figure out
globally unique numbering at build time.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-16-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The CPUState struct has a bitmap tracking which VCPU
events are currently active. This is indexed based on
the event ID values, and sized according the maximum
TraceEventVCPUID enum value.
When we start dynamically assigning IDs at runtime,
we can't statically declare a bitmap without making
an assumption about the max event count. This problem
can be solved by dynamically allocating the per-CPU
dstate bitmap.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the ftrace backend is compiled into QEMU, any attempt
to start QEMU while non-root will fail due to the
inability to open /sys/kernel/debug/tracing/tracing_on.
Add a fallback into the code so that it connects up the
trace_marker_fd variable to /dev/null when getting
EACCES on the 'trace_on' file. This allows QEMU to
run, with ftrace turned into a no-op.
[Fixed s/setting/getting/ and s/EACCESS/EACCES/ errors pointed out by
Eric Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-13-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently simpletrace assumes that events are given IDs
starting from 0, based on the order in which they appear
in the trace-events file, with no gaps. When the
trace-events file is split up, this assumption becomes
problematic.
To deal with this, extend the simpletrace format so that
it outputs a table of event name <-> ID mappings. That
will allow QEMU to assign arbitrary IDs to events without
breaking simpletrace parsing.
The v3 simple trace format was
FILE HEADER
EVENT TRACE RECORD 0
EVENT TRACE RECORD 1
...
EVENT TRACE RECORD N
The v4 simple trace format is now
FILE HEADER
EVENT MAPPING RECORD 0
EVENT MAPPING RECORD 1
...
EVENT MAPPING RECORD M
EVENT TRACE RECORD RECORD 0
EVENT TRACE RECORD RECORD 1
...
EVENT TRACE RECORD N
Although this shows all the mapping records being emitted
upfront, this is not required by the format. While the main
simpletrace backend will emit all mappings at startup,
the systemtap simpletrace.stp script will emit the mappings
at first use. eg
FILE HEADER
...
EVENT MAPPING RECORD 0
EVENT TRACE RECORD RECORD 0
EVENT TRACE RECORD RECORD 1
EVENT MAPPING RECORD 1
EVENT TRACE RECORD RECORD 2
...
EVENT TRACE RECORD N
This is more space efficient given that most trace records
only include a subset of events.
In modifying the systemtap simpletrace code, a 'begin' probe
was added to emit the trace event header, so you no longer
need to add '--no-header' when running simpletrace.py for
systemtap generated trace files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-12-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TraceEventID and TraceEventVCPUID enums constants are
no longer actually used for anything critical.
The TRACE_EVENT_COUNT limit is used to determine the size
of the TraceEvents array, and can be removed if we just
NULL terminate the array instead.
The TRACE_VCPU_EVENT_COUNT limit is used as a magic value
for marking non-vCPU events, and also for declaring the
size of the trace dstate mask in the CPUState struct.
The former usage can be replaced by a dedicated constant
TRACE_EVENT_VCPU_NONE, defined as (uint32_t)-1. For the
latter usage, we can simply define a constant for the
number of VCPUs, avoiding the need for the full enum.
The only other usages of the enum values can be replaced
by accesing the id/vcpu_id fields via the named TraceEvent
structs.
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-11-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently event-internal.h includes generated-events.h,
while generated-events.h includes event-internal.h
causing a circular dependency.
event-internal.h requires that the content of
generated-events.h comes first, so that it can see
the typedefs for TraceEventID and TraceEventVCPUID.
Switching the TraceEvent struct to use uint32_t
for the two ID fields removes the dependency on
the typedef, allowing events-internal.h to be a
self-contained header. This will then let the patch
following this move event-internal.h to the top of
generated-events.h, so we can expose TraceEvent
struct variables in generated-events.h
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of having a global dstate array, declare a single
'uint16 TRACE_${EVENT_NAME}_DSTATE' variable for each
trace event. Record a pointer to this variable in the
TraceEvent struct too.
By turning trace_event_get_state_dynamic_by_id into a
macro, this still hits the fast path, and cache affinity
is ensured by declaring all the uint16 vars adjacent to
each other.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-7-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently methods which want to iterate over trace events,
do so using the trace_event_count() and trace_event_id()
methods. This leaks the concept of a single ID enum to
the callers. There is an alternative trace_event_pattern()
method which can be used in an iteration context, but its
design is stateless, so is not easy to expand it in the
future.
This defines a formal iterator API will provide a future-
proof way of iterating over events.
The iterator is also able to apply a pattern match filter
to events, further removing the need for the pattern
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-4-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.
commit 30656b097e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:34 2016 +0800
filter-rewriter: rewrite tcp packet to keep secondary connection
commit f4b618360e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:31 2016 +0800
colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit 0682e15b19
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:30 2016 +0800
colo-compare: introduce packet comparison thread
commit 59509ec16b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:27 2016 +0800
net/colo.c: add colo.c to define and handle packet
This moves all events into net/trace-events where they
were supposed to live.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
C99 requires SIZE_MAX to be declared with the same type as the
integral promotion of size_t, but OSX mistakenly defines it as
an 'unsigned long long' expression even though size_t is only
'unsigned long'. Rather than futzing around with whether size_t
is 32- or 64-bits wide (which would be needed if we cared about
using SIZE_T in a #if expression), just hard-code it with a cast.
This is not a strict C99-compliant definition, because it doesn't
work in the preprocessor, but if we later need that, the build
will break on Mac to inform us to improve our replacement at that
time.
See also https://patchwork.ozlabs.org/patch/542327/ for an
instance where the wrong type trips us up if we don't fix it
for good in osdep.h.
Some versions of glibc make a similar mistake with SSIZE_MAX; the
goal is that the approach of this patch could be copied to work
around that problem if it ever becomes important to us.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1476200784-17210-1-git-send-email-eblake@redhat.com
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block layer patches
# gpg: Signature made Mon 10 Oct 2016 12:33:14 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
dmg: Move libbz2 code to dmg-bz2.so
module: Don't load the same module if requested multiple times
scripts: Allow block module to not define BlockDriver
block: Add qdev ID to DEVICE_TRAY_MOVED
block-backend: Remember if attached device is non-qdev
block: Add node name to BLOCK_IO_ERROR event
block: Add bdrv_runtime_opts to query-command-line-options
block: use aio_bh_schedule_oneshot
async: add aio_bh_schedule_oneshot
block: use bdrv_add_before_write_notifier
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
QAPI patches for 2016-10-07
# gpg: Signature made Fri 07 Oct 2016 18:55:40 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-10-07:
docs: Belatedly update for move of QMP/* to docs/
docs: Belatedly update for move of qmp-commands.txt
qmp: Disable query-cpu-* commands when they're unavailable
MAINTAINERS: Pass the QObject staff from Luiz to Markus
MAINTAINERS: Pass the HMP staff from Luiz to David
qapi: return a 'missing parameter' error
qapi: assert list entry has a value
qapi: add assert about root value
tests/test-qmp-input-strict: Cover missing struct members
qapi: Fix crash when 'any' or 'null' parameter is missing
qmp: fix object-add assert() without props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Thread Sanitizer fixes (Alex)
* Coverity fixes (David)
* test-qht fixes (Emilio)
* QOM interface for info irq/info pic (Hervé)
* -rtc clock=rt fix (Junlian)
* mux chardev fixes (Marc-André)
* nicer report on death by signal (Michal)
* qemu-tech TLC (Paolo)
* MSI support for edu device (Peter)
* qemu-nbd --offset fix (Tomáš)
# gpg: Signature made Fri 07 Oct 2016 17:25:10 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (39 commits)
qemu-doc: merge qemu-tech and qemu-doc
qemu-tech: rewrite some parts
qemu-tech: reorganize content
qemu-tech: move TCG test documentation to tests/tcg/README
qemu-tech: move user mode emulation features from qemu-tech
qemu-tech: document lazy condition code evaluation in cpu.h
qemu-tech: move text from qemu-tech to tcg/README
qemu-doc: drop installation and compilation notes
qemu-doc: replace introduction with the one from the internals manual
qemu-tech: drop index
test-qht: perform lookups under rcu_read_lock
qht: fix unlock-after-free segfault upon resizing
qht: simplify qht_reset_size
qemu-nbd: Shrink image size by specified offset
qemu_kill_report: Report PID name too
util: Introduce qemu_get_pid_name
char: update read handler in all cases
char: use a fixed idx for child muxed chr
i8259: give ISA device when registering ISA ioports
.travis.yml: add gcc sanitizer build
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Trigger Mode field of IOAPIC must match the Trigger Mode in
the IRTE according to VT-d Spec 5.1.5.1.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
617 QTAILQ_FOREACH(opt, &opts->head, next) {
[Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
(gdb) bt
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
#1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
#2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
#3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
#4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
#5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
#6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
#7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
#8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
#9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
#10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
#11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
#12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
#13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
#14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
#15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
#16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
#17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
#19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
#20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
#21 0x000055baf676587b in main_loop () at vl.c:1908
#22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
(gdb) p opts
$1 = (QemuOpts *) 0x0
The crash occurred when attaching vhost-user net via QMP:
{
"execute": "chardev-add",
"arguments": {
"id": "charnet2",
"backend": {
"type": "socket",
"data": {
"addr": {
"type": "unix",
"data": {
"path": "/var/run/openvswitch/vhost-user1"
}
},
"wait": false,
"server": false
}
}
},
"id": "libvirt-19"
}
{
"return": {
},
"id": "libvirt-19"
}
{
"execute": "netdev_add",
"arguments": {
"type": "vhost-user",
"chardev": "charnet2",
"id": "hostnet2"
},
"id": "libvirt-20"
}
Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_scsi_bad_req() function is called when a guest sends a
request with missing or ill-sized headers. This generally happens
when the virtio_scsi_parse_req() function returns an error.
With this patch, virtio_scsi_bad_req() will mark the device as broken,
detach the request from the virtqueue and free it, instead of forcing
QEMU to exit.
In nearly all locations where virtio_scsi_bad_req() is called, the only
thing to do next is to return to the caller.
The virtio_scsi_handle_cmd_req_prepare() function is an exception though.
It is called in a loop by virtio_scsi_handle_cmd_vq() and passed requests
freshly popped from a cmd virtqueue; virtio_scsi_handle_cmd_req_prepare()
does some sanity checks on the request and returns a boolean flag to
indicate whether the request should be queued or not. In the latter case,
virtio_scsi_handle_cmd_req_prepare() has detected a non-fatal error and
sent a response back to the guest.
We have now a new condition to take into account: the device is broken
and should stop all processing.
The return value of virtio_scsi_handle_cmd_req_prepare() is hence changed
to an int. A return value of zero means that the request should be queued.
Other non-fatal error cases where the request shoudn't be queued return
a negative errno (values are vaguely inspired by the error condition, but
the only goal here is to discriminate the case we're interested in).
And finally, if virtio_scsi_bad_req() was called, -EINVAL is returned. In
this case, virtio_scsi_handle_cmd_vq() detaches and frees already queued
requests, instead of submitting them.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
If this happens, virtio_net_flush_tx() also returns -EINVAL, so that all
callers can stop processing the virtqueue immediatly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: QEMU should not exit.
With this patch, if virtio_blk_handle_request() detects a buggy request, it
marks the device as broken and returns an error to the caller so it takes
appropriate action.
In the case of virtio_blk_handle_vq(), we detach the request from the
virtqueue, free its allocated memory and stop popping new requests.
We don't need to bother about multireq since virtio_blk_handle_request()
errors out early and mrb.num_reqs == 0.
In the case of virtio_blk_dma_restart_bh(), we need to detach and free all
queued requests as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest may send a request without providing buffers for the reply
or for the request itself, and virtqueue_pop() will return an element with
either in_num == 0 or out_num == 0.
All 9P requests are expected to start with the following 7-byte header:
uint32_t size_le;
uint8_t id;
uint16_t tag_le;
If iov_to_buf() fails to return these 7 bytes, then something is wrong in
the guest.
In both cases, it is wrong to crash QEMU, since the root cause lies in the
guest.
This patch hence does the following:
- keep the check of in_num since pdu_complete() assumes it has enough
space to store the reply and we will send something broken to the guest
- let iov_to_buf() handle out_num == 0, since it will return 0 just like
if the guest had provided an zero-sized buffer.
- call virtio_error() to inform the guest that the device is now broken,
instead of aborting
- detach the request from the virtqueue and free it
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some functions that were called from the dataplane code are now only used
locally:
virtio_blk_init_request()
virtio_blk_handle_request()
virtio_blk_submit_multireq()
since commit "03de2f527499 virtio-blk: do not use vring in dataplane", and
virtio_blk_free_request()
since commit "6aa46d8ff1ee virtio: move VirtQueueElement at the beginning
of the structs".
This patch converts them to static.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.
There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away. For example, if the virtio
device is reset then virtqueue elements are no longer valid.
This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse. This ensures that the
VirtQueueElement is freed properly.
Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure to unmap the scatter-gather list and decrement vq->inuse
before freeing requests in virtio_blk_reset().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so it would be possible to verify _PXM generation in
DSDT and SRAT tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.
_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.
As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This removes the last usage of <sys/poll.h> in the code base.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the qio_channel_tls_new_(server|client) methods fail,
we disconnect the client. Unfortunately a missing return
means we then go on to try and run the TLS handshake on
a NULL I/O channel. This gives predictably segfaulty
results.
The main way to trigger this is to request a bogus TLS
priority string for the TLS credentials. e.g.
-object tls-creds-x509,id=tls0,priority=wibble,...
Most other ways appear impossible to trigger except
perhaps if OOM conditions cause gnutls initialization
to fail.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to linux kernel commit <89c1e79eb30> ("linux/bitmap.h: improve
BITMAP_{LAST,FIRST}_WORD_MASK"), these two macro could be improved.
This patch takes this change and also move them all in header file.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix spelling, the GNU make text functions is not called "find-string"
but "findstring".
Broken in commit 2b2e59e. Fairly harmless: its only use is in
tests/tcg/Makefile, where the bug can cause the I386_TESTS not to
run when they should.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The shipping default setting for the Freescale M5208EVB board is to run
the CPU at 166.67MHz. The current qemu emulation code for this board is
defaulting to 66MHz. This results in time appearing to run way to slowly.
So a "sleep 5" in a standard ColdFire Linux build takes almost 15
seconds in real time to actually complete.
Change the hard coded default to match the default hardware setting.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit b35ba30f8f when it was introduced, phys_page_compact()
takes an unused compacted argument.
ubsan complains about it when launching qemu-x86_64 without arguments:
qemu/exec.c:310:5: runtime error: variable length array bound evaluates to non-positive value 0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While processing isochronous transfer descriptors(iTD), if the page
select(PG) field value is out of bands it will return. In this
situation the ehci's sg list is not freed thus leading to a memory
leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This makes it easier to parse the schema file for tool generation:
each paragraph is either a non-docstring comment, or a docstring
immediately followed by a Python dict describing an API item.
Signed-off-by: David Anderson <dave@natulte.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0c0c1fd9 generated module_block.h automatically, Add it to .gitignore to
avoid checking in it by 'git add .'.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/intc/sh_intc.c and hw/timer/sh_timer.c seem to belong to
the R2D machine, as far as I can see.
And concerning the Shix machine, it does not make much sense
to have a "M:" entry here and the "S:" set to "Orphan". So
I'd like to suggest to use "Odd Fixes" here instead.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The MIPS section is missing some related header files, and files
in the hw/misc/, hw/intc/ and hw/timer/ folders.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The default-configs/*-linux-user.mak belong to Linux usermode
emulation, and default-configs/*-bsd-user.mak belong to BSD
usermode emulation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The get_maintainer.pl script currently thinks that the win32
related files in the util and include folders are currently
unmaintained. Thus let's add some additional wildcards to
match these files.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The files in tests/rocker/ and docs/specs/rocker.txt
should be listed in the Rocker section of MAINTAINERS.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
etraxfs_dma.h and etraxfs.h in include/hw/cris/ obviously belong
to the CRIS section in MAINTAINERS.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Makefile.objs and trace-events in hw/virtio/ were not covered
by MAINTAINERS yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
And while we're at it, remove Blue Swirl from the list
of maintainers. Blue has apparently been inactive for
quite a while now, so I assume he's unfortunately
not available as maintainer anymore.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
audio.h and pcspk.h are recognized as maintained files now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The hmp-commands-info.hx, hmp.h and include/monitor/hmp-target.h
files were classified as unmaintained. Let's add them to the
HMP section.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The hw/moxie/ folder and default-configs/moxie-softmmu.mak
obviously belong to the Moxie CPU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up the documentation for -chardev ringbuf. There is a stray
closing parenthesis and the comma is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of requiring clients to actually call the query-cpu-*
commands to find out if they are implemented, remove them from
the output of "query-commands", so clients know they are not
available.
This is implemented by extending the existing hack at
qmp_unregister_commands_hack(). I wish I could avoid adding even
more #ifdefs to that code, but that's the solution we have today.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1475696941-8056-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The 'old' dispatch code returned a QERR_MISSING_PARAMETER for missing
parameters, but the qapi qmp_dispatch() code uses
QERR_INVALID_PARAMETER_TYPE.
Improve qapi code to return QERR_MISSING_PARAMETER where
appropriate.
Fix expected error message in iotests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-4-marcandre.lureau@redhat.com>
[Drop incorrect error_setg() from qmp_input_type_any() and
qmp_input_type_null()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Block patches for the block queue.
# gpg: Signature made Fri Oct 7 14:14:45 2016 CEST
# gpg: using RSA key 0xF407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2016-10-07:
dmg: Move libbz2 code to dmg-bz2.so
module: Don't load the same module if requested multiple times
scripts: Allow block module to not define BlockDriver
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
dmg.o was moved to block-obj-m in 5505e8b76 to become a separate module,
so that its reference to libbz2, since 6b383c08c, doesn't add an extra
library to the main executable.
Until recently, commit 06e60f70a (blockdev: Add dynamic module loading
for block drivers) moved it back to block-obj-y to simplify the design
of dynamic loading of block modules. But we don't want to lose the
feature of less library dependency on the main executable.
The solution here is to move only the bz2 related code to a separate
DSO file, and load it when dmg_open is called.
dmg_probe doesn't depend on bz2 support to work, and is the only code in
this file which can run before dmg_open.
While we are at it, fix the unhelpful cast of last argument passed to
dmg_uncompress_bz2.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1473043845-13197-4-git-send-email-famz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The event currently only contains the BlockBackend name. However, with
anonymous BlockBackends, this is always the empty string. Add the qdev
ID (or if none was given, the QOM path) so that the user can still see
which device caused the event.
Event generation has to be moved from bdrv_eject() to the BlockBackend
because the BDS doesn't know the attached device, but that's easy
because blk_eject() is the only user of it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Almost all block devices are qdevified by now. This allows us to go back
from the BlockBackend to the DeviceState. xen_disk is the last device
that is missing. We'll remember in the BlockBackend if a xen_disk is
attached and can then disable any features that require going from a BB
to the DeviceState.
While at it, clearly mark the function used by xen_disk as legacy even
in its name, not just in TODO comments.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The event currently only contains the BlockBackend name. However, with
anonymous BlockBackends, this is always the empty string. Add the node
name so that the user can still see which block device caused the event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Recently we moved a few options from QemuOptsLists in blockdev.c to
bdrv_runtime_opts in block.c in order to make them accissble using
blockdev-add. However, this has the side effect that these options are
missing from query-command-line-options now, and libvirt consequently
disables the corresponding feature.
This problem was reported as a regression for the 'discard' option,
introduced in commit 818584a4. However, it is more general than that.
Fix it by adding bdrv_runtime_opts to the list of QemuOptsLists that are
returned in query-command-line-options. For the future, libvirt is
advised to use QMP schema introspection for block device options.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
This simplifies bottom half handlers by removing calls to qemu_bh_delete and
thus removing the need to stash the bottom half pointer in the opaque
datum.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_bh_delete is already clearing bh->scheduled at the same time
as it's setting bh->deleted. Since it's not using any memory
barriers, there is no synchronization going on for bh->deleted,
and this makes the bh->deleted checks superfluous in aio_compute_timeout,
aio_bh_poll and aio_ctx_check.
Just remove them, and put the (bh->scheduled && bh->deleted) combo
to work in a new function aio_bh_schedule_oneshot. The new function
removes the need to save the QEMUBH pointer between the creation
and the execution of the bottom half.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Merge what is left of qemu-tech into the main manual as an appendix.
Ultimately we should have a new internals manual built from docs/, and
then the "Translator Internals" parts of qemu-tech could move to docs/
as well. The bits on limitation and features of CPU emulation should
remain in qemu-doc.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop most the device emulation part and merge the rest into the description
of the MMU. Make some bits more up-to-date.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split more parts into separate chapters, place comparison last,
rename "Introduction" to "CPU emulation".
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are interesting for users too, since nowadays most
qemu-user users are going to be somewhat technical rather than
just people that want to run Wine. Some detail is lost, on
the other hand some of the information I removed (e.g. basic
block unchaining) was obsolete.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike the other sections, they are pretty specific to a particular CPU.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are in README or obsolete, and the detailed version can be on a
website instead.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The user manual has an obsolete introduction, and the one in
the internals manual lists QEMU's features quite nicely.
Drop the obsolete content and remove generic user-level
documentation from qemu-tech.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qht_lookup is meant to be called from an RCU read-critical
section. Make sure we're in such a section in test-qht
when performing lookups, despite the fact that no races
in qht can be triggered by test-qht since it is single-threaded.
Note that rcu_register_thread is already called by the
rcu_after_fork hook, and therefore duplicating it here would
be a bug.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-4-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old map's bucket locks are being unlocked *after*
that same old map has been passed to RCU for destruction.
This is a bug that can cause a segfault, since there's
no guarantee that the deletion will be deferred (e.g.
there may be no concurrent readers).
The segfault is easily triggered in RHEL6/CentOS6 with qht-test,
particularly on a single-core system or by pinning qht-test
to a single core.
Fix it by unlocking the map's bucket locks right after having
published the new map, and (crucially) before marking the map
for deletion via call_rcu().
While at it, expand qht_do_resize() to atomically do (1) a reset,
(2) a resize, or (3) a reset+resize. This simplifies the calling
code, since the new function (qht_do_resize_reset()) acquires
and releases the buckets' locks.
Note that no qht_do_reset inline is provided, since it would have
no users--qht_reset() already performs a reset without taking
ht->lock.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-3-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes gcc doesn't pick up the fact that 'new' is properly
set if 'resize == true', which may generate an unnecessary
build warning.
Fix it by removing 'resize' and directly checking that 'new'
is non-NULL.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-2-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit ad739706bb, user_creatable_add_type() expects to be
given a qdict. However, if object-add is called without props, you reach
the assert: "qemu/qom/object_interfaces.c:115: user_creatable_add_type:
Assertion `qdict' failed.", because the qdict isn't created in this
case (it's optional).
Furthermore, qmp_input_visitor_new() is not meant to be called without a
dict, and a further commit will assert in this situation.
If none given, create an empty qdict in qmp to avoid the
user_creatable_add_type() assert(qdict).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160922203927.28241-2-marcandre.lureau@redhat.com>
Tested-by: Xiao Long Jiang <zxiaol@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
ppc patch queue 2016-10-06
Currently accumulated target-ppc and spapr machine related patches.
- More POWER9 instruction implementations
- Additional test case / enabling of test cases for Power
- Assorted fixes
# gpg: Signature made Thu 06 Oct 2016 07:05:07 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161006: (29 commits)
hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machine
tests/pxe: Use -nodefaults to speed up ppc64/ipv6 pxe test
spapr: fix check of cpu alias name in spapr_get_cpu_core_type()
tests: enable ohci/uhci/xhci tests on PPC64
libqos: use generic qtest_shutdown()
libqos: add PCI management in qtest_vboot()/qtest_shutdown()
libqos: add PPC64 PCI support
target-ppc: fix vmx instruction type/type2
target-ppc/kvm: Enable transactional memory on POWER8 with KVM-HV, too
target-ppc/kvm: Add a wrapper function to check for KVM-PR
MAINTAINERS: Add two more ppc related files
target-ppc: Implement mtvsrws instruction
target-ppc: add vclzlsbb/vctzlsbb instructions
target-ppc: add vector compare not equal instructions
target-ppc: fix invalid mask - cmpl, bctar
target-ppc: add stxvb16x instruction
target-ppc: add lxvb16x instruction
target-ppc: add stxvh8x instruction
target-ppc: add lxvh8x instruction
target-ppc: improve stxvw4x implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b9841). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF is unfortunately quite slow when running with TCG, so
the pxe test is also performing rather slow here. By using
"-nodefaults" we can disable some devices (vscsi) that we
are not interested in here, so that SLOF does not have to
scan them during boot and thus starts up a little bit faster.
The ppc64 pxe-test now only takes 27 seconds on my laptop
instead of 33 seconds.
The "-nodefaults" flag seems to work fine for the x86 tests,
too, so it is added here unconditionally here (though there
is no speed-up on x86 by using this flag).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.
$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").
The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Machine specific shutdown function can be registered by
the machine specific qtest_XXX_boot() if needed.
So we will not have to test twice the architecture (on boot and on
shutdown) if the test can be run on several architectures.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Transactional memory is also supported on POWER8 KVM-HV if the
KVM_CAP_PPC_HTM is not available in the kernel yet, so add a hack
to allow TM here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It makes more sense if we have a proper function to check
for KVM-PR than to check for the GET_PVINFO extension all
over the place.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Expanded a comment to discourage overuse of this function]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The file hw/intc/heathrow_pic.c belongs to the Old World Mac
machine, and pc-bios/ppc_rom.bin belongs to the PReP machine.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The following vector instructions are added from ISA 3.0.
vclzlsbb - Vector Count Leading Zero Least-Significant Bits Byte
vctzlsbb - Vector Count Trailing Zero Least-Significant Bits Byte
Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The following vector compare not equal instructions are added from ISA 3.0.
vcmpneb - Vector Compare Not Equal Byte
vcmpneh - Vector Compare Not Equal Halfword
vcmpnew - Vector Compare Not Equal Word
Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff. There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
HMP pull
Just Wanpeng's pull request this time, but
this pull is as much about me checking out my
process.
# gpg: Signature made Tue 04 Oct 2016 18:24:10 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20161004:
hmp: fix qemu crash due to ioapic state dump w/ split irqchip
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block layer patches
# gpg: Signature made Thu 29 Sep 2016 14:11:30 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
oslib-posix: add a configure switch to debug stack usage
coroutine-sigaltstack: use helper for allocating stack memory
coroutine-ucontext: use helper for allocating stack memory
coroutine: add a macro for the coroutine stack size
coroutine-sigaltstack: rename coroutine struct appropriately
oslib-posix: add helpers for stack alloc and free
block: Remove qemu_root_bds_opts
block: Move 'discard' option to bdrv_open_common()
block: Use 'detect-zeroes' option for 'blockdev-change-medium'
block: Parse 'detect-zeroes' in bdrv_open_common()
block/qapi: Move 'aio' option to file driver
block/qapi: Use separate options type for curl driver
block: Drop aio/cache consistency check from qmp_blockdev_add()
block: Fix error path in qmp_blockdev_change_medium()
block-backend: remove blk_flush_all
qemu: use bdrv_flush_all for vm_stop et al
block: reintroduce bdrv_flush_all
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the ARM v6 architecture, 'sub pc, pc, 1' is not an interworking
branch, so the computed new value is written to r15 as a normal
value. The architecture says that in this case, bits [1:0] of
the value written must be ignored if we are in ARM mode (or
bit [0] ignored if in Thumb mode); this is a change from the
ARMv4/v5 specification that behaviour is UNPREDICTABLE.
Use the correct mask on the PC value when doing a non-interworking
store to PC.
A popular library used on RaspberryPi uses this instruction
as part of a trick to determine whether it is running on
ARMv6 or ARMv7, and we were mishandling the sequence.
Fixes bug: https://bugs.launchpad.net/bugs/1625295
Reported-by: <stu.axon@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474380941-4730-1-git-send-email-peter.maydell@linaro.org
Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.
If cleared it specifies 32 bits.
If set it specifies 64 bits.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1475230780-8669-1-git-send-email-edgar.iglesias@gmail.com
[PMM: tweaked phrasing per on-list discussion]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a generic loader to QEMU which can be used to load images or set
memory values.
Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.
This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)
the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.
GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).
The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Advertise gsi routing and set up irqchip routing entries for
GIC SPIs.
This is not mandated as long as MSI routing is not used
(because the kernel sets a default irqchip routing table).
However once MSI routing gets used (for VIRTIO-PCI vhost for
example), the first call to KVM_SET_GSI_ROUTING overrides the
kernel default irqchip table.
If no routing entry exists for the GSI, any IRQFD signaling for
this GSI will fail.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
x86 bug fixes
Fix for a XSAVE regression when using "-cpu host", and a fix on
the Opteron_G3 CPU model.
# gpg: Signature made Mon 03 Oct 2016 20:08:13 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Correct family/model/stepping for Opteron_G3
target-i386: Report known CPUID[EAX=0xD,ECX=0]:EAX bits as migratable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Sun 02 Oct 2016 02:49:58 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
docker: Build in a clean directory
smbios: fix uuid copy
xenpv: Fix qemu_uuid compiling error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When qemu is being killed, its last words are:
2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180
That's nice, but what process is 11180? What if I told you we can
do better:
2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180 (/usr/sbin/libvirtd)
And that's exactly what this patch does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a2ba85a8e349a0ea9ee06424226197a03cd04bd3.1474987617.git.mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit ac1b84dd1 (rhbz#1027181), a check was added to only update the
"read handler" when the front-end is opened, because the read callbacks
were not restored when a device is plugged. However, this seems not
correct, the handler is correctly set back on hotplug (in
virtconsole_realize) and the bug can no longer be reproduced.
Calling chr_update_read_handler() allows to fix the mux driver to stop
calling the child handlers (which may be going to be destroyed).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161003094704.18087-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mux_chr_update_read_handler() is adding a new mux_cnt each time
mux_chr_update_read_handler() is called, it's not possible to actually
update the "child" chr callbacks that were set previously. This may lead
to crashes if the "child" chr is destroyed:
valgrind x86_64-softmmu/qemu-system-x86_64 -chardev
stdio,mux=on,id=char0 -mon chardev=char0,mode=control,default
when quitting:
==4306== Invalid read of size 8
==4306== at 0x8061D3: json_lexer_destroy (json-lexer.c:385)
==4306== by 0x7E39F8: json_message_parser_destroy (json-streamer.c:134)
==4306== by 0x3447F6: monitor_qmp_event (monitor.c:3908)
==4306== by 0x480153: mux_chr_send_event (qemu-char.c:630)
==4306== by 0x480694: mux_chr_event (qemu-char.c:734)
==4306== by 0x47F1E9: qemu_chr_be_event (qemu-char.c:205)
==4306== by 0x481207: fd_chr_close (qemu-char.c:1114)
==4306== by 0x481659: qemu_chr_close_stdio (qemu-char.c:1221)
==4306== by 0x486F07: qemu_chr_free (qemu-char.c:4146)
==4306== by 0x486F97: qemu_chr_delete (qemu-char.c:4154)
==4306== by 0x487E66: qemu_chr_cleanup (qemu-char.c:4678)
==4306== by 0x495A98: main (vl.c:4675)
==4306== Address 0x28439e90 is 112 bytes inside a block of size 240 free'd
==4306== at 0x4C2CD5A: free (vg_replace_malloc.c:530)
==4306== by 0x1E4CBF2D: g_free (in /usr/lib64/libglib-2.0.so.0.4800.2)
==4306== by 0x344DE9: monitor_cleanup (monitor.c:4058)
==4306== by 0x495A93: main (vl.c:4674)
==4306== Block was alloc'd at
==4306== at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
==4306== by 0x1E4CBE18: g_malloc (in /usr/lib64/libglib-2.0.so.0.4800.2)
==4306== by 0x344BF8: monitor_init (monitor.c:4021)
==4306== by 0x49063C: mon_init_func (vl.c:2417)
==4306== by 0x7FC6DE: qemu_opts_foreach (qemu-option.c:1116)
==4306== by 0x4954E0: main (vl.c:4473)
Instead, keep the "child" chr associated with a particular idx so its
handlers can be updated and removed to avoid the crash.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161003094704.18087-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As it seems easy to break the ThreadSanitizer build we should defend it to
ensure that fixes get applied when it breaks. We use the Ubuntu GCC PPA
to get the latest GCC goodness.
As we need to use the -fuse-ld=gold work around we have to disable the
linux-user targets as these trip up the linker.
The make check run is also disabled for Travis but this can be
re-enabled once the check targets have been fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-13-alex.bennee@linaro.org>
The guest client's use of the glib's g_atomic primitives causes newer
GCC's to barf when built on Travis. As QEMU has its own primitives with
well understood semantics we might as well use them.
The use of atomics was a little inconsistent so I've also ensure the
values are correctly set with atomic primitives at the same time.
I also made the usage of bool consistent while I was at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-12-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ThreadSanitizer detects a possible race between reading/writing the
hashes. The ordering semantics are already documented for QHT however
for true C11 compliance we should use relaxed atomic primitives for
accesses that are done across threads. On x86 this slightly changes to
the code to not do a load/compare in a single instruction leading to a
slight performance degradation.
Running 'taskset -c 0 tests/qht-bench -n 1 -d 10' (i.e. all lookups) 10
times, we get:
before the patch:
$ ./mean.pl 34.04 34.24 34.38 34.25 34.18 34.51 34.46 34.44 34.29 34.08
34.287 +- 0.160072900059109
after:
$ ./mean.pl 33.94 34.00 33.52 33.46 33.55 33.71 34.27 34.06 34.28 34.58
33.937 +- 0.374731014640279
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20160930213106.20186-10-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ThreadSanitizer picks up potential races although we already use
barriers to ensure things are in the correct order when processing exit
requests. For true C11 defined behaviour across threads we need to use
relaxed atomic_set/atomic_read semantics to reassure tsan.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-9-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idiom CPU_GET_CLASS(cpu) is fairly extensively used in various
threads and trips of ThreadSanitizer due to the fact it updates
obj->class->object_cast_cache behind the scenes. As this is just a
fast-path cache there is no need to lock updates.
However to ensure defined C11 behaviour across threads we need to use
the plain atomic_read/set primitives and keep the sanitizer happy.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160930213106.20186-7-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu tracks guest time based on vector [base_rtc, last_update], in which
last_update stands for a monotonic tick which is actually uptime of the
host.
according to rtc implementation codes of recent releases and upstream,
after
migration, the time base vector [base_rtc, last_update] isn't updated to
coordinate with the destionation host, ie. qemu doesnt update last_update
to
uptime of the destination host.
what problem have we got because of this bug? after migration, guest time
may
jump back to several days ago, that will make some critical business
applications,
such as lotus notes, malfunction.
this patch is trying to fix the problem. first, when vmsave in progress,
we
rtc_update_time to refresh time stamp in cmos array, then during
vmrestore,
we rtc_set_time to update qemu base_rtc and last_update variable according
to time
stamp in cmos array.
Signed-off-by: Junlian Bell <zhongjun@sangfor.com.cn>
Message-Id: <20160926124101.2364-1-zhongjun@sangfor.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current CPU definition for AMD Opteron third generation includes
features like SSE4a and LAHF_LM support in emulated CPUID. These
features are present in K8 rev.E or K10 CPUs and later. However,
current G3 family and model describe 2nd generation K8 cores instead.
This is incorrect but was considered harmless until our tests found a
problem with linux kernels >= 3.10 (and maybe earlier) which specifically
check for Opteron K8 model when parsing CPUID leaf 0x80000001:
http://lxr.free-electrons.com/source/arch/x86/kernel/cpu/amd.c?v=3.16#L552
This code will disable LAHF_LM feature in /proc/cpuinfo if model number
is inconsistent.
This change sets Opteron_G3 family/model/stepping to 16/2/3 which is
a proper Opteron 3rd generation 2350 CPU.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A regression was introduced by commit 96193c22a "target-i386:
Move xsave component mask to features array": all
CPUID[EAX=0xD,ECX=0]:EAX bits were being reported as unmigratable
because they don't have feature names defined. This broke
"-cpu host" because it enables only migratable features by
default.
This adds a new field to FeatureWordInfo: migratable_flags, which
will make those features be reported as migratable even if they
don't have a property name defined.
Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Paolo Bonzini <bonzini@gnu.org>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently we configure and build under "$QEMU_SRC/tests/docker" which is
dubious. Create a fixed directory (to be friendly to ccache) and change
to there before calling build_qemu.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1475047892-11955-1-git-send-email-famz@redhat.com>
MIPS patches 2016-09-29
Changes:
* MIPS Maintainer update
* vmstateify rc4030
# gpg: Signature made Thu 29 Sep 2016 13:09:09 BST
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20160929:
hw/dma: vmstateify rc4030
MAINTAINERS: update target-mips maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a memory leak in ide_register_restart_cb() in hw/ide/core.c and add
idebus_unrealize() in hw/ide/qdev.c to have calls to
qemu_del_vm_change_state_handler() to deal with the dangling change
state handler during hot-unplugging ide devices which might lead to a
crash.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1474995212-10580-1-git-send-email-ashijeetacharya@gmail.com
[Minor whitespace fix --js]
Signed-off-by: John Snow <jsnow@redhat.com>
ATA8-APT defines the state transitions for both a host controller and
for the hardware device during the lifecycle of a DMA transfer, in
section 9.7 "DMA command protocol."
One of the interesting tidbits here is that when a device transitions
from DDMA0 ("Prepare state") to DDMA1 ("Data_Transfer State"), it can
choose to set either BSY or DRQ to signal this transition, but not both.
as ide_sector_dma_start is the last point in our preparation process
before we begin the real data transfer process (for either AHCI or BMDMA),
this is the correct transition point for DDMA0 to DDMA1.
I have chosen !BSY && DRQ for QEMU to make the transition from DDMA0 the
most obvious.
Reported-by: Benjamin David Lunt <fys@fysnet.net>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1470175541-19344-1-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
this adds a knob to track the maximum stack usage of stacks
created by qemu_alloc_stack.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the allocated stack will be adjusted to the minimum supported stack size
by the OS and rounded up to be a multiple of the system pagesize.
Additionally an architecture dependent guard page is added to the stack
to catch stack overflows.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The remaining options in qemu_root_bds_opts (aio and copy-on-read)
aren't used any more, the QAPI schema doesn't contain them. Therefore
all the code processing qemu_root_bds_opts options is dead and can be
removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This enables its use for nested child nodes. The compatibility
between the 'discard' and 'detect-zeroes' setting is checked in
bdrv_open_common() now as the former setting isn't available before
calling bdrv_open() any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of modifying the new BDS after it has been opened, use the newly
supported 'detect-zeroes' option in bdrv_open_common() so that all
requirements are checked (detect-zeroes=unmap requires discard=unmap).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Amongst others, this means that you can now use the 'detect-zeroes'
option for non-top-level nodes in blockdev-add, like the QAPI schema
promises.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The option whether or not to use a native AIO interface really isn't a
generic option for all drivers, but only applies to the native file
protocols. This patch moves the option in blockdev-add to the
appropriate places (raw-posix and raw-win32).
We still have to keep the flag BDRV_O_NATIVE_AIO for compatibility
because so far the AIO option was usually specified on the wrong layer
(the top-level format driver, which didn't even look at it) and then
inherited by the protocol driver (where it was actually used). We can't
forbid this use except in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We're going to add an option to the file drivers which doesn't apply to
the curl drivers, so give them a separate option type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The TODO comment has been addressed a while ago and this is now checked
in raw-posix, so we don't have to special case this in blockdev-add any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit 00949bab incorrectly changed one instance of &err into errp while
touching the line. Change it back.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We can teach Xen to drain and flush each device as it needs to, instead
of trying to flush ALL devices. This removes the last user of
blk_flush_all.
The function is therefore removed under the premise that any new uses
of blk_flush_all would be the wrong paradigm: either flush the single
device that requires flushing, or use an appropriate flush_all mechanism
from outside of the BlkBackend layer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reimplement bdrv_flush_all for vm_stop. In contrast to blk_flush_all,
bdrv_flush_all does not have device model restrictions. This allows
us to flush and halt unconditionally without error.
This allows us to do things like migrate when we have a device with
an open tray, but has a node that may need to be flushed, or nodes
that aren't currently attached to any device and need to be flushed.
Specifically, this allows us to migrate when we have a CDROM with
an open tray.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit fe1a9cbc moved the flush_all routine from the bdrv layer to the
block-backend layer. In doing so, however, the semantics of the routine
changed slightly such that flush_all now used blk_flush instead of
bdrv_flush.
blk_flush can fail if the attached device model reports that it is not
"available," (i.e. the tray is open.) This changed the semantics of
flush_all such that it can now fail for e.g. open CDROM drives.
Reintroduce bdrv_flush_all to regain the old semantics without having to
alter the behavior of blk_flush or blk_flush_all, which are already
'doing the right thing.'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert rc4030 to VMState.
Now saving the whole 16 entries rather than 15.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
[Yongbok Kim: edited commit message]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Since 9c5ce8db, the uuid is wrongly copied, as QemuUUID 'in' argument is
already a pointer.
Fixes ASAN complaining:
hw/smbios/smbios.c:489:5: runtime error: load of address 0x7fffcdb91b00
with insufficient space for an object of type '__int128 unsigned'
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160928143810.25558-1-marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Warp the long error message line in commit message. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Commit 0ed93d84ed ("linux-aio: process
completions from ioq_submit()") added an optimization that processes
completions each time ioq_submit() returns with requests in flight.
This commit introduces a "Co-routine re-entered recursively" error which
can be triggered with -drive format=qcow2,aio=native.
Fam Zheng <famz@redhat.com>, Kevin Wolf <kwolf@redhat.com>, and I
debugged the following backtrace:
(gdb) bt
#0 0x00007ffff0a046f5 in raise () at /lib64/libc.so.6
#1 0x00007ffff0a062fa in abort () at /lib64/libc.so.6
#2 0x0000555555ac0013 in qemu_coroutine_enter (co=0x5555583464d0) at util/qemu-coroutine.c:113
#3 0x0000555555a4b663 in qemu_laio_process_completions (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:218
#4 0x0000555555a4b874 in ioq_submit (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:331
#5 0x0000555555a4ba12 in laio_do_submit (fd=fd@entry=13, laiocb=laiocb@entry=0x555559d38ae0, offset=offset@entry=2932727808, type=type@entry=1) at block/linux-aio.c:383
#6 0x0000555555a4bbd3 in laio_co_submit (bs=<optimized out>, s=0x555557e2f7f0, fd=13, offset=2932727808, qiov=0x555559d38e20, type=1) at block/linux-aio.c:402
#7 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x55555663bcb0, offset=offset@entry=2932727808, bytes=bytes@entry=8192, qiov=qiov@entry=0x555559d38e20, flags=0) at block/io.c:804
#8 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x55555663bcb0, req=req@entry=0x555559d38d20, offset=offset@entry=2932727808, bytes=bytes@entry=8192, align=align@entry=512, qiov=qiov@entry=0x555559d38e20, flags=0) at block/io.c:1041
#9 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=2932727808, bytes=8192, qiov=qiov@entry=0x555559d38e20, flags=flags@entry=0) at block/io.c:1133
#10 0x0000555555a29629 in qcow2_co_preadv (bs=0x555556635890, offset=6178725888, bytes=8192, qiov=0x555557527840, flags=<optimized out>) at block/qcow2.c:1509
#11 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x555556635890, offset=offset@entry=6178725888, bytes=bytes@entry=8192, qiov=qiov@entry=0x555557527840, flags=0) at block/io.c:804
#12 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x555556635890, req=req@entry=0x555559d39000, offset=offset@entry=6178725888, bytes=bytes@entry=8192, align=align@entry=1, qiov=qiov@entry=0x555557527840, flags=0) at block/io.c:1041
#13 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=offset@entry=6178725888, bytes=bytes@entry=8192, qiov=qiov@entry=0x555557527840, flags=flags@entry=0) at block/io.c:1133
#14 0x0000555555a4515a in blk_co_preadv (blk=0x5555566356d0, offset=6178725888, bytes=8192, qiov=0x555557527840, flags=0) at block/block-backend.c:783
#15 0x0000555555a45266 in blk_aio_read_entry (opaque=0x5555577025e0) at block/block-backend.c:991
#16 0x0000555555ac0cfa in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:78
It turned out that re-entrant ioq_submit() and completion processing
between three requests caused this error. The following check is not
sufficient to prevent recursively entering coroutines:
if (laiocb->co != qemu_coroutine_self()) {
qemu_coroutine_enter(laiocb->co);
}
As the following coroutine backtrace shows, not just the current
coroutine (self) can be entered. There might also be other coroutines
that are currently entered and transferred control due to the qcow2 lock
(CoMutex):
(gdb) qemu coroutine 0x5555583464d0
#0 0x0000555555ac0c90 in qemu_coroutine_switch (from_=from_@entry=0x5555583464d0, to_=to_@entry=0x5555572f9890, action=action@entry=COROUTINE_ENTER) at util/coroutine-ucontext.c:175
#1 0x0000555555abfe54 in qemu_coroutine_enter (co=0x5555572f9890) at util/qemu-coroutine.c:117
#2 0x0000555555ac031c in qemu_co_queue_run_restart (co=co@entry=0x5555583462c0) at util/qemu-coroutine-lock.c:60
#3 0x0000555555abfe5e in qemu_coroutine_enter (co=0x5555583462c0) at util/qemu-coroutine.c:119
#4 0x0000555555a4b663 in qemu_laio_process_completions (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:218
#5 0x0000555555a4b874 in ioq_submit (s=s@entry=0x555557e2f7f0) at block/linux-aio.c:331
#6 0x0000555555a4ba12 in laio_do_submit (fd=fd@entry=13, laiocb=laiocb@entry=0x55555a338b40, offset=offset@entry=2911477760, type=type@entry=1) at block/linux-aio.c:383
#7 0x0000555555a4bbd3 in laio_co_submit (bs=<optimized out>, s=0x555557e2f7f0, fd=13, offset=2911477760, qiov=0x55555a338e80, type=1) at block/linux-aio.c:402
#8 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x55555663bcb0, offset=offset@entry=2911477760, bytes=bytes@entry=8192, qiov=qiov@entry=0x55555a338e80, flags=0) at block/io.c:804
#9 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x55555663bcb0, req=req@entry=0x55555a338d80, offset=offset@entry=2911477760, bytes=bytes@entry=8192, align=align@entry=512, qiov=qiov@entry=0x55555a338e80, flags=0) at block/io.c:1041
#10 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=2911477760, bytes=8192, qiov=qiov@entry=0x55555a338e80, flags=flags@entry=0) at block/io.c:1133
#11 0x0000555555a29629 in qcow2_co_preadv (bs=0x555556635890, offset=6157475840, bytes=8192, qiov=0x5555575df720, flags=<optimized out>) at block/qcow2.c:1509
#12 0x0000555555a4fd23 in bdrv_driver_preadv (bs=bs@entry=0x555556635890, offset=offset@entry=6157475840, bytes=bytes@entry=8192, qiov=qiov@entry=0x5555575df720, flags=0) at block/io.c:804
#13 0x0000555555a52b34 in bdrv_aligned_preadv (bs=bs@entry=0x555556635890, req=req@entry=0x55555a339060, offset=offset@entry=6157475840, bytes=bytes@entry=8192, align=align@entry=1, qiov=qiov@entry=0x5555575df720, flags=0) at block/io.c:1041
#14 0x0000555555a52db8 in bdrv_co_preadv (child=<optimized out>, offset=offset@entry=6157475840, bytes=bytes@entry=8192, qiov=qiov@entry=0x5555575df720, flags=flags@entry=0) at block/io.c:1133
#15 0x0000555555a4515a in blk_co_preadv (blk=0x5555566356d0, offset=6157475840, bytes=8192, qiov=0x5555575df720, flags=0) at block/block-backend.c:783
#16 0x0000555555a45266 in blk_aio_read_entry (opaque=0x555557231aa0) at block/block-backend.c:991
#17 0x0000555555ac0cfa in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:78
Use the new qemu_coroutine_entered() function instead of comparing
against qemu_coroutine_self(). This is correct because:
1. If a coroutine is not entered then it must have yielded to wait for
I/O completion. It is therefore safe to enter.
2. If a coroutine is entered then it must be in
ioq_submit()/qemu_laio_process_completions() because otherwise it
would be yielded while waiting for I/O completion. Therefore it will
check laio->ret and return from ioq_submit() instead of yielding,
i.e. it's guaranteed not to hang.
Reported-by: Fam Zheng <famz@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1474989516-18255-4-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes problems with translated set 1, where most make code were wrong.
This fixes problems with set 3 for extended keys (like arrows) and lot of other keys.
Added a FIXME for set 3, where most keys must not (by default) deliver a break code.
Detailed list of changes on untranslated set 2:
- change of ALTGR break code from 0xe4 to 0xf0 0x08
- change of ALTGR_R break code from 0xe0 0xe4 to 0xe0 0xf0 0x08
- change of F7 make code from 0x02 to 0x83
- change of F7 break code from 0xf0 0x02 to 0xf0 0x83
- change of PRINT make code from 0xe0 0x7c to 0xe0 0x12 0xe0 0x7c
- change of PRINT break code from 0xe0 0xf0 0x7c to 0xe0 0xf0 0x7c 0xe0 0xf0 0x12
- change of PAUSE key: new make code = old make code + old break code, no more break code
- change on RO break code from 0xf3 to 0xf0 0x51
- change on KP_COMMA break code from 0xfe to 0xf0 0x6d
Detailed list of changes on translated set 2 (the most commonly used):
- change of PRINT make code from 0xe0 0x37 to 0xe0 0x2a 0xe0 0x37
- change of PRINT break code from 0xe0 0xb7 to 0xe0 0xb7 0xe0 0xaa
- change of PAUSE key: new make code = old make code + old break code, no more break code
Reference:
http://www.computer-engineering.org/ps2keyboard/scancodes1.htmlhttp://www.computer-engineering.org/ps2keyboard/scancodes2.htmlhttp://www.computer-engineering.org/ps2keyboard/scancodes3.html
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1473969987-5890-5-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 9c5ce8db2e ("vl: Switch qemu_uuid to QemuUUID") changed most
users of qemu_uuid but not all. Fix a build error on s390/kvm.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
According to the PoP, subchannels are only considered operational if
they are enabled _and_ the device number is valid. With the current
checks being enabled _or_ having a valid device number was
sufficient. This caused qemu to allow IO on subchannels that were not
enabled.
Fix the checks to require both bits to be set.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
IPL should cause the IPL I/O device to become enabled. So when handling
the IPL program, we should set the E (Enable) bit. However, virtio-ccw
does not know whether it's dealing with an IPL device or not. Since
trying to perform I/O on a disabled device doesn't make any sense,
let's just always enable it. At the same time we can remove the
SCSW_FCTL_START_FUNC flag as it is ignored for msch anyway and did
not enable the device as intended.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
[remove superfluous flag]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If two VCPUs exit at the same time and target each other
with a sigp, both could run into a deadlock as run_on_cpu
on CPU0 will free the BQL when starting the CPU1 target routine.
CPU1 will run its sigp initiater for CPU0 before handling
the run_on_cpu requests, thus resulting in a dead lock.
As all qemu SIGPs are slow path anway we can use a big sigp
lock and allow only one SIGP for the guest at a time. We will
return condition code 2 (BUSY) on contention to the guest.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that each S390 PCI device uses an IO region as MSIX region. The
code in s390_translate_iommu() will never be triggered. Let's remove
it.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For efficiency we now assign one msix io region for each pci device
and provide it with the pointer to the zPCI device as opaque
parameter. In addition, we remove msix address space and add msix io
region as a subregion to the root memory region of pci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pull mr variable declarations at the top of the functions instead of
mixing them up with the code. This is in preparation for followup
patches.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When enabling the sanitizer build it will complain about control
reaching a non-void function. Normally the compiler should detect that
there is only one possible exit given a static VNC_SERVER_FB_BYTES.
As we always expect a static VNC_SERVER_FB_BYTES I've added a compile
time assert and just called the sub-function directly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This switches over spice (in opengl mode) to render DisplaySurface
updates into a opengl texture, using the helper functions in
ui/console-gl.c. With this patch applied spice (with gl=on) will
stop using qxl rendering ops, it will use dma-buf passing all the
time, i.e. for bios/bootloader (before virtio-gpu driver is loaded)
too.
This should improve performance even using spice (with gl=on) with
non-accelerated stdvga because we stop squeezing all display updates
through a unix/tcp socket and basically using a shared memory transport
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474617028-3979-3-git-send-email-kraxel@redhat.com
virtio-gpu does a set-scanout at each frame (it might be a driver
regression). qemu_console_resize() recreate a surface even if the size
didn't change, and this shows up in profiling reports because the
surface is cleared. With this patch, I get a +15-20% glmark2
improvement.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20160826094711.14470-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In the CRIS v17 CPU an ADDC (add with carry) instruction has been added
compared to the v10 instruction set.
Assembler syntax:
ADDC [Rs],Rd
ADDC [Rs+],Rd
Size: Dword
Description:
The source data is added together with the carry flag to the
destination register. The size of the operation is dword.
Operation:
Rd += s + C-flag;
Flags affected:
S R P U I X N Z V C
- - - - - 0 * * * *
Instruction format: ADDC [Rs],Rd
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
|Destination(Rd)| 1 0 0 1 1 0 1 0 | Source(Rs) |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
Instruction format: ADDC [Rs+],Rd
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
|Destination(Rd)| 1 1 0 1 1 0 1 0 | Source(Rs) |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
[EI: Shorten 80+ lines]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use the correct register names for v10 and don't dump support function
registers for pre-v32.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, checks that every
syscall increments the time returned by gettimeofday() by exactly 1 ms.
This is not guaranteed or even desirable on QEMU so remove this test.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, is meant to test
the GDB simulator's --sysroot feature and always fails in QEMU. Remove
it. openpf3 tests the same sequence of system calls (without assuming
the precence of --sysroot).
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add the appropriate register constraints for the inline asm for the
write and exit system calls. Without the correct constraints for the
write() function, correct failure messages are not printed succesfully
on newer version of GCC.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The CRIS tests expect that functions marked inline are always inline.
With newer versions of GCC, building them results warnings like the
following and spurious failures when they are run.
In file included from tests/tcg/cris/check_moveq.c:5:0:
tests/tcg/cris/crisutils.h:66:20: warning: inlining failed in call to
'cris_tst_cc.constprop.0': call is unlikely and code size would grow [-Winline]
tests/tcg/cris/check_moveq.c:28:13: warning: called from here [-Winline]
Use the always_inline attribute when building them to fix this.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Copy data operated on during request from/to local buffers to/from
the grant references.
Before grant copy operation local buffers must be allocated what is
done by calling ioreq_init_copy_buffers. For the 'read' operation,
first, the qemu device invokes the read operation on local buffers
and on the completion grant copy is called and buffers are freed.
For the 'write' operation grant copy is performed before invoking
write by qemu device.
A new value 'feature_grant_copy' is added to recognize when the
grant copy operation is supported by a guest.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
x86 and machine queue, 2016-09-27
# gpg: Signature made Tue 27 Sep 2016 21:10:06 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
sysbus: Remove ignored return value of FindSysbusDeviceFunc
target-i386: Remove has_msr_* global vars for KVM features
target-i386: Clear KVM CPUID features if KVM is disabled
target-i386: Remove has_msr_hv_tsc global variable
target-i386: Remove has_msr_hv_apic global variable
target-i386: Remove has_msr_mtrr global variable
target-i386: Move xsave component mask to features array
target-i386: xsave: Calculate set of xsave components on realize
target-i386: xsave: Helper function to calculate xsave area size
target-i386: xsave: Simplify CPUID[0xD,0].{EAX,EDX} calculation
target-i386: xsave: Calculate enabled components only once
target-i386: Don't try to enable PT State xsave component
target-i386: Move feature name arrays inside FeatureWordInfo
linux-user: remove #define smp_{cores, threads}
target-i386: Enable CPUID[0x8000000A] if SVM is enabled
target-i386: Automatically set level/xlevel/xlevel2 when needed
tests: Test CPUID level handling for old machines
tests: Add test code for CPUID level/xlevel handling
target-i386: Add a marker to end of the region zeroed on reset
target-i386: Remove unused X86CPUDefinition::xlevel2 field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variables are not necessary because we can check KVM
feature flags in X86CPU directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will ensure all checks for features[FEAT_KVM] in the code
will be correct in case the KVM CPUID leaf is completely
disabled.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check
cpu->hyperv_time directly.
We just need to ensure cpu->hyperv_time will be cleared if the
feature is not really being exposed to the guest due to missing
KVM_CAP_HYPERV_TIME capability.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check
cpu->hyperv_vapic directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global variable is not necessary because we can check the CPU
feature flags directly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will reuse the existing check/enforce logic in
x86_cpu_filter_features() to check the xsave component bits
against GET_SUPPORTED_CPUID.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of doing complex calculations and calling
kvm_arch_get_supported_cpuid() inside cpu_x86_cpuid(), calculate
the set of required XSAVE components earlier, at realize time.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the xsave area size calculation from cpu_x86_cpuid() inside
its own function. While doing it, change it to use the XSAVE area
struct sizes for the initial size, instead of the magic 0x240
number.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of assigning individual bits in a loop, just copy the
values from ena_mask.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of checking both env->features and ena_mask at two
different places in the CPUID code, initialize ena_mask based on
the features that are enabled for the CPU, and then clear
unsupported bits based on kvm_arch_get_supported_cpuid().
The results should be exactly the same, but it will make it
easier to move the mask calculation elsewhare, and reuse
x86_cpu_filter_features() for the kvm_arch_get_supported_cpuid()
check.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The code that calculates the set of supported XSAVE components on
CPUID looks at ext_save_areas to find out which components should
be enabled. However, if there are zeroed entries in the
ext_save_areas array, the
((env->features[esa->feature] & esa->bits) == esa->bits)
check will always succeed and QEMU will unconditionally try to
enable the component.
Luckily this never caused any problems because the only missing
entry in ext_save_areas is the PT State component (bit 8), and
KVM currently doesn't support it (so it was cleared on ena_mask).
But the code was still incorrect and would break if KVM starts
returning CPUID[EAX=0xD,ECX=0].EAX[bit 8] as supported on
GET_SUPPORTED_CPUID.
Fix the problem by changing the code to not enable a XSAVE
component if ExtSaveArea::bits is zero.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It makes it easier to guarantee the arrays are the right size,
and to find information when looking at the code.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SVM needs CPUID[0x8000000A] to be available. So if SVM is enabled
in a CPU model or explicitly in the command-line, adjust CPUID
xlevel to expose the CPUID[0x8000000A] leaf.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of requiring users and management software to be aware of
required CPUID level/xlevel/xlevel2 values for each feature,
automatically increase those values when features need them.
This was already done for CPUID[7].EBX, and is now made generic
for all CPUID feature flags. Unit test included, to make sure we
don't break ABI on older machine-types and don't mess with the
CPUID level values if they are explicitly set by the user.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're going to change the way level/xlevel/xlevel2 are handled
when enabling features, but we need to keep the old behavior on
existing machine types. Add test cases for that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add test code that will check if the automatic CPUID level
changes are working as expected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using cpuid_level, use an empty struct as a marker
(like we already did with {start,end}_init_save). This will avoid
accidentaly resetting the wrong fields if we change the field
ordering on CPUX86State.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No CPU model in builtin_x86_defs has xlevel2 set, so it is always
zero. Delete the field.
Note that this is not an user-visible change. It doesn't remove
the ability to set xlevel2 on the command-line, it just removes
an unused field in builtin_x86_defs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch fixes bug with stopping and restarting replay
through monitor.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080815.6992.71818.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces vmstate for replay data structures.
It allows saving and loading vmstate while replaying.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080810.6992.68420.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves replay static variables into the structure
to allow saving and loading them with savevm/loadvm.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080804.6992.87687.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set cpu->running without taking the cpu_list lock, only requiring it if
there is a concurrent exclusive section. This requires adding a new
field to CPUState, which records whether a running CPU is being counted
in pending_cpus.
When an exclusive section is started concurrently with cpu_exec_start,
cpu_exec_start can use the new field to determine if it has to wait for
the end of the exclusive section. Likewise, cpu_exec_end can use it to
see if start_exclusive is waiting for that CPU.
This a separate patch for easier bisection of issues.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use async_safe_run_on_cpu() to make tb_flush() thread safe. This is
possible now that code generation does not happen in the middle of
execution.
It can happen that multiple threads schedule a safe work to flush the
translation buffer. To keep statistics and debugging output sane, always
check if the translation buffer has already been flushed.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
[AJB: minor re-base fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-13-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not necessary to hold qemu_cpu_list_mutex throughout the
exclusive section, because no other exclusive section can run
while pending_cpus != 0.
exclusive_idle() is called in cpu_exec_start(), and that prevents
any CPUs created after start_exclusive() from entering cpu_exec()
during an exclusive section.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to call exclusive_idle() from cpu_exec_end since it is done
immediately afterwards in cpu_exec_start. Any exclusive section could
run as soon as cpu_exec_end leaves, because cpu->running is false and the
mutex is not taken, so the call does not add any protection either.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
async_run_on_cpu is only called from the I/O thread, not from CPU threads,
so it doesn't make any difference. It will make a difference however
for async_safe_run_on_cpu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will serve as the base for async_safe_run_on_cpu. Because
start_exclusive uses CPU_FOREACH, merge exclusive_lock with
qemu_cpu_list_lock: together with a call to exclusive_idle (via
cpu_exec_start/end) in cpu_list_add, this protects exclusive work
against concurrent CPU addition and removal.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migrating a VM during reboot sometimes results in differences
between the source and destination in the SMRAM area.
This is because migration_bitmap_sync() only fetches from KVM
the dirty log of address_space_memory. SMRAM memory slots
are ignored and the modifications to SMRAM are not sent to the
destination.
Reported-by: He Rongguang <herongguang.he@huawei.com>
Reviewed-by: He Rongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 vIOMMUs still lack of a complete IOMMU notifier mechanism.
Before that is achieved, let's open a door for vhost DMAR support,
which only requires cache invalidations (UNMAP operations).
Meanwhile, convert hw_error() to error_report() and exit(1), to make
the error messages cleaner and obvious (no CPU registers will be dumped).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This uses the wrong frame size for packets composed of multiple
descriptors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This uses the wrong frame size for packets composed of multiple
descriptors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ColdFire Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixes 2 issues:
1. Bits set in EIAC register should be cleared
from IMS when EIAM is not used.
2. Only bit that corresonds to the interrupt being
raised should be cleared.
See spec. 10.2.4.7 Interrupt Auto Clear
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do not raise ACK interrupts when
RFCTL.ACKDIS bit is set (see spec. 10.2.5.16).
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Interrupt mask for legacy OTHER causes should
not apply to MSI-X OTHER cause.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixes incorrect check for
interrypt type being used.
PBSCLR register is valid for MSI-X only.
See spec. 10.2.3.13 MSI—X PBA Clear
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
CTRL_EXT.EIAME bit controls clearing of IAM bits,
but current code clears IMS bits instead.
See spec. 10.2.2.5 Extended Device Control Register.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Before this patch first netdev queue only was flushed.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
we only need to allocate enough memory to hold the packet. This might be
less than NET_BUFSIZE. Additionally fail early if the packet is larger
than NET_BUFSIZE.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/e1000e_core.c:56: warning: e1000e_set_interrupt_cause declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of e1000e_set_interrupt_cause was here
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.
Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.
When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.
primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.
In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Upon hmp_host_net_remove(), the appropriate -net client is deleted
(according to the given vlan_id and device id), as well as the
corresponsing hub port.
However, the relevant '-net' option that was added by former
hmp_host_net_add() call is still present in "net" options group.
This makes the following legit HMP sequence erroneous:
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
(qemu) host_net_remove 1 n1
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
Duplicate ID 'n1' for net
Fix, by deleting the stored '-net' option associated with the given
device id.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows increasing the rx queue size up to 1024: unlike with tx,
guests don't put in huge S/G lists into RX so the risk of running into
the max 1024 limitation due to some off-by-one seems small.
It's helpful for users like OVS-DPDK which don't do any buffering on the
host - 1K roughly matches 500 entries in tun + 256 in the current rx
queue, which seems to work reasonably well. We could probably make do
with ~750 entries but virtio spec limits us to powers of two.
It might be a good idea to specify an s/g size limit in a future
version.
It also might be possible to make the queue size smaller down the road, 64
seems like the minimal value which will still work (as guests seem to
assume a queue full of 1.5K buffers is enough to process the largest
incoming packet, which is ~64K). No one actually asked for this, and
with virtio 1 guests can reduce ring size without need for host
configuration, so don't bother with this for now.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Suggested-by: Patrik Hermansson <phermansson@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
IOMMU Notifier list is used for notifying IO address mapping changes.
Currently VFIO is the only user.
However it is possible that future consumer like vhost would like to
only listen to part of its notifications (e.g., cache invalidations).
This patch introduced IOMMUNotifier and IOMMUNotfierFlag bits for a
finer grained control of it.
IOMMUNotifier contains a bitfield for the notify consumer describing
what kind of notification it is interested in. Currently two kinds of
notifications are defined:
- IOMMU_NOTIFIER_MAP: for newly mapped entries (additions)
- IOMMU_NOTIFIER_UNMAP: for entries to be removed (cache invalidates)
When registering the IOMMU notifier, we need to specify one or multiple
types of messages to listen to.
When notifications are triggered, its type will be checked against the
notifier's type bits, and only notifiers with registered bits will be
notified.
(For any IOMMU implementation, an in-place mapping change should be
notified with an UNMAP followed by a MAP.)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add AMD IOMMU emulaton to Qemu in addition to Intel IOMMU.
The IOMMU does basic translation, error checking and has a
minimal IOTLB implementation. This IOMMU bypassed the need
for target aborts by responding with IOMMU_NONE access rights
and exempts the region 0xfee00000-0xfeefffff from translation
as it is the q35 interrupt region.
We advertise features that are not yet implemented to please
the Linux IOMMU driver.
IOTLB aims at implementing commands on real IOMMUs which is
essential for debugging and may not offer any performance
benefits
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the avail ring index is bogus virtqueue_num_heads() must return
-EINVAL.
The only caller is virtqueue_get_avail_bytes(). Return saying no bytes
are available when virtqueue_num_heads() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The virtio code uses int, unsigned int, and uint16_t for virtqueue
indices. The uint16_t is used for the low-level descriptor layout in
virtio_ring.h while code that isn't concerned with descriptor layout can
use unsigned int.
Use of int is problematic because it can result in signed/unsigned
comparison and incompatible int*/unsigned int* pointer types.
Make the virtqueue_get_avail_bytes() 'i' variable unsigned int. This
eliminates the need to introduce casts and modify code further in the
patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Errors can occur during virtqueue_pop(), especially in
virtqueue_map_desc(). In order to handle this we must unmap iov[]
before returning NULL. The caller will consider the virtqueue empty and
the virtio_error() call will have marked the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Send a subsection if the vdev->broken flag is set. This allows live
migration of broken virtio devices.
The subsection is only sent if vdev->broken has been set. In most cases
the flag will be clear and no subsection will be sent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
commit (14c985cff target-i386: present virtual L3 cache info for vcpus)
misplaced compat property putting it in new 2.8 machine type
which would effectively to disable feature until 2.9 is released.
Intent of commit probably should be to disable feature for 2.7
and older while allowing not yet released 2.8 to have feature
enabled by default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit
bacc344c ("machine: add properties to compat_props incrementaly")
there is no need to chain per machine type compat macro.
Clean up places where it was done anyway so it will be
consistent and won't confuse contributors during addtion
of new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Check that qemu disconnects the backend that doesn't have the previously
acked features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test just checks that 2 virtio-net queues can be setup over
vhost-user and waits for them to be started.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Block layer patches
# gpg: Signature made Fri 23 Sep 2016 12:59:46 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
block: Remove BB interface from blockdev-add/del
qemu-iotests/141: Avoid blockdev-add with id
block: Avoid printing NULL string in error messages
qemu-iotests/139: Avoid blockdev-add with id
qemu-iotests/124: Avoid blockdev-add with id
qemu-iotests/118: Avoid blockdev-add with id
qemu-iotests/117: Avoid blockdev-add with id
qemu-iotests/087: Avoid blockdev-add with id
qemu-iotests/081: Avoid blockdev-add with id
qemu-iotests/071: Avoid blockdev-add with id
qemu-iotests/067: Avoid blockdev-add with id
qemu-iotests/041: Avoid blockdev-add with id
qemu-iotests/118: Test media change with qdev name
block: Accept device model name for block_set_io_throttle
block: Accept device model name for blockdev-change-medium
block: Accept device model name for eject
block: Accept device model name for x-blockdev-remove-medium
block: Accept device model name for x-blockdev-insert-medium
block: Accept device model name for blockdev-open/close-tray
qdev-monitor: Add blk_by_qdev_id()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/various-pull-request: (23 commits)
docker: exec $CMD
docker: Terminate instances at SIGTERM and SIGHUP
docker: Support showing environment information
docker: Print used options before doing configure
docker: Flatten default target list in test-quick
docker: Update fedora image to latest
docker: Generate /packages.txt in ubuntu image
docker: Generate /packages.txt in fedora image
docker: Generate /packages.txt in centos6 image
tests: Ignore test-uuid
Add UUID files to MAINTAINERS
tests: Add uuid tests
uuid: Tighten uuid parse
vl: Switch qemu_uuid to QemuUUID
configure: Remove detection code for UUID
tests: No longer dependent on CONFIG_UUID
crypto: Switch to QEMU UUID API
vpc: Use QEMU UUID API
vdi: Use QEMU UUID API
vhdx: Use QEMU UUID API
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/Makefile.include
With this patch, blockdev-add always works on a node level, i.e. it
creates a BDS, but no BB. Consequently, x-blockdev-del doesn't need the
'device' option any more, but 'node-name' becomes mandatory.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Even for nodes that have a BlockBackend attached, bdrv_get_parent_name()
can return NULL if the BB is anonymous (e.g. it belongs to a block job
or a device that was created with a drive=<node-name> option).
Remove the information from the error message. The user probably knows
already why the node is still in use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Some test cases that used to work with an unattached BlockBackend are
removed, either because they don't make sense with an attached device or
because the equivalent test case with an attached device already exists.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
The test cases that test conflicts between the 'id' option to
blockdev-add and existing block devices or the 'node-name' of the same
command can be removed because it won't be possible to specify this at
the end of the series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
In order to keep the test meaningful, some instances of query-block that
want to check whether the node still exists and would now turn up empty
must be converted to query-named-block-nodes (which also return the
protocol level node, but that shouldn't hurt).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We just added the option to use qdev device names in all device related
block QMP commands. This patch converts some of the test cases in 118 to
use qdev device names instead of BlockBackend names to cover the new
way. It converts cases for each of the media change commands, but only
for CD-ROM and not everywhere, so that the old way is still tested, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts block_set_io_throttle to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts blockdev-change-medium to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts eject to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts x-blockdev-remove-medium to accept a qdev device name.
As the command is experimental, we can still remove the 'device' option
that uses the BlockBackend name. This requires some test case changes
and is left for another series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts x-blockdev-insert-medium to accept a qdev device name.
As the command is experimental, we can still remove the 'device' option
that uses the BlockBackend name. This requires some test case changes
and is left for another series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts blockdev-open/close-tray to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This finds the BlockBackend attached to the device model identified by
its qdev ID.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This finds a BlockBackend given the device model that is attached to it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There were a few instances left. After this patch we're using the
macro in all places.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we're checking for duplicates in the reopen queue, there's no
need to force a specific order in which the queue is constructed so we
can revert 3db2bd5508.
Since both ways of constructing the queue are now valid, this patch
doesn't have any effect on the behavior of QEMU and is not strictly
necessary. However it can help us check that the fix for the reopen
queue is robust: if it stops working properly at some point, iotest
040 will break.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_reopen_queue_child() assumes that a BlockDriverState is never
added twice to BlockReopenQueue.
That's however not the case: commit_start() adds 'base' (and its
children) to a new reopen queue, and then 'overlay_bs' (and its
children, which include 'base') to the same queue. The effect of this
is that the first set of options is ignored and overriden by the
second.
We fixed this by swapping the order in which both BDSs were added to
the queue in 3db2bd5508. This patch
checks if a BDS is already in the reopen queue and keeps its options.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the "read-only" option to the QDict. One important effect of
this change is that when a child inherits options from its parent, the
existing "read-only" mode can be preserved if it was explicitly set
previously.
This addresses scenarios like this:
[E] <- [D] <- [C] <- [B] <- [A]
In this case, if we reopen [D] with read-only=off, and later reopen
[B], then [D] will not inherit read-only=on from its parent during the
bdrv_reopen_queue_child() stage.
The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the
value of the "read-only" option.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're only doing this immediately before opening the image, but
bs->open_flags is used earlier in the function. At the moment this is
not causing problems because none of the checked flags are modified by
update_flags_from_options(), but this will change when we introduce
the "read-only" option.
This patch calls update_flags_from_options() at the beginning of the
function, immediately after creating the QemuOpts.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an image is opened with snapshot=on, its flags are modified by
bdrv_backing_options() and then bs->open_flags is updated accordingly.
This last step is unnecessary if we calculate the new flags before
setting bs->open_flags.
Soon we'll introduce the "read-only" option, and then we'll need to
be able to modify its value in the QDict when snapshot=on. This is
more cumbersome if bs->options is already set. This patch simplifies
that. Other than that, there are no semantic changes. Although it
might seem that bs->options can have a different value now because
it is stored after calling bdrv_backing_options(), this call doesn't
actually modify them in this scenario.
The code that sets BDRV_O_ALLOW_RDWR is also moved for the same
reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk can never be NULL, drop the check. This fixes a Coverity warning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Broken in previous commit:
commit aaa4d20b49
Author: Kevin Wolf <kwolf@redhat.com>
Date: Wed Jun 1 15:21:05 2016 +0200
qcow2: Make copy_sectors() byte based
The copy_sectors() code was originally using the 'sector'
parameter for encryption, which was passed in by the caller
from the QCowL2Meta.offset field (aka the guest logical
offset).
After the change, the code is using 'cluster_offset' which
was passed in from QCow2L2Meta.alloc_offset field (aka the
host physical offset).
This would cause the data to be encrypted using an incorrect
initialization vector which will in turn cause later reads
to return garbage.
Although current qcow2 built-in encryption is blocked from
usage in the emulator, one could still hit this if writing
to the file via qemu-{img,io,nbd} commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without this patch, a number of Mips syscalls will be logged in the following
way (in this example, this is an invocation of accept4()):
86906 Unknown syscall 4334
This patch provides standard Qemu's strace output for such cases, like this:
95861 accept4(3,1996486000,1996486016,128,0,0) = 5
Such output may be further improved by providing strace-related functions
that handle only particular syscalls, but this is beyond the scope of
this patch.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.
Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The function that is changed in this patch is supposed to indicate that
there was certain argument rearrangement related to 64-bit arguments on
32-bit platforms. The background on such rearrangements can be found,
for example, in the man page for syscall(2).
However, for 64-bit Mips architectures there is no such rearrangement,
and this patch reflects it.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch corrects target_semid64_ds structure definition for Mips.
See, for example definition of semid64_ds for Mips in Linux kernel:
arch/mips/include/uapi/asm/sembuf.h#L13.
This patch will also fix certain semaphore-related LTP tests for Mips,
if they are executed in Qemu user mode for any Mips platform.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Structure flock is defined for Mips in a way different from any
other platform. For reference, see Linux kernel source code files:
arch/mips/include/uapi/asm/fcntl.h, line 63 (for Mips)
include/uapi/asm-generic/fcntl.h, line 195 (for all other platforms)
This patch fix this problem, by amending structure target_flock,
for Mips only.
Besides, this patch fixes LTP tests fcntl11, fcntl17, fcntl19, fcntl20,
and fcntl21, which are currently failing, if executed in Qemu user mode
for Mips platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For some reason, Qemu's TARGET_F_GETOWN constant for Mips does not
match the correct value of correspondent F_GETOWN. This patch fixes
this problem.
For reference, see Mips' F_GETOWN definition in Linux kernel at
arch/mips/include/uapi/asm/fcntl.h#L44.
This patch also fixes some fcntl()-related LTP tests for Qemu
user mode for Mips.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch fixes wrong definition of TARGET_SIOCATMARK for mips,
alpha, and sh4.
The current definition is:
#define SIOCATMARK 0x8905
while the correct definition is:
#define SIOCATMARK TARGET_IOR('s', 7, int)
See Linux kernel source file arch/mips/include/uapi/asm/sockios.h#L19
for reference.
This patch also a fixes LTP test failure for test sockioctl01, for
mips, alpha, and sh4.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Make use of memory barrier TCG opcode in MIPS front end.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define a new CPU definition supporting 24KEc cores, similar to
the existing 24Kc, but with added support for DSP instructions
and MIPS16e (and without FPU).
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
sscanf is relatively loose (tolerate) on some invalid formats that we
should fail instead of generating a wrong uuid structure, like with
whitespaces and short strings.
Add and use a helper function to first check the format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-11-git-send-email-famz@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
This removes our dependency to libuuid, so that the driver can always be
built.
Similar to how we handled data plane configure options, --enable-vhdx
and --disable-vhdx are also changed to a nop with a message saying it's
obsolete.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-4-git-send-email-famz@redhat.com>
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.
It is hard to maintain, and hard to reason for users.
Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.
Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
When trying to run docker tests on a host without the docker
command, we get the following Python backtrace:
$ make docker-test-quick@centos6 V=1
.../qemu/tests/docker/docker.py build qemu:centos6 .../qemu/tests/docker/dockerfiles/centos6.docker
Traceback (most recent call last):
File ".../qemu/tests/docker/docker.py", line 339, in <module>
sys.exit(main())
File ".../qemu/tests/docker/docker.py", line 336, in main
return args.cmdobj.run(args, argv)
File ".../qemu/tests/docker/docker.py", line 231, in run
dkr = Docker()
File ".../qemu/tests/docker/docker.py", line 98, in __init__
self._command = _guess_docker_command()
File ".../qemu/tests/docker/docker.py", line 41, in _guess_docker_command
stdout=DEVNULL, stderr=DEVNULL) == 0:
File "/usr/lib64/python2.7/subprocess.py", line 523, in call
return Popen(*popenargs, **kwargs).wait()
File "/usr/lib64/python2.7/subprocess.py", line 711, in __init__
errread, errwrite)
File "/usr/lib64/python2.7/subprocess.py", line 1343, in _execute_child
raise child_exception
OSError: [Errno 2] No such file or directory
.../qemu/tests/docker/Makefile.include:47: recipe for target 'docker-image-centos6' failed
make: *** [docker-image-centos6] Error 1
Change _guess_docker_command() to handle OSError exceptions
raised by subprocess.call(), so we will keep looking for other
commands and print a better error message.
New output will be:
$ make docker-test-quick@centos6 V=1
.../qemu/tests/docker/docker.py build qemu:centos6 .../qemu/tests/docker/dockerfiles/centos6.docker
Traceback (most recent call last):
File ".../qemu/tests/docker/docker.py", line 343, in <module>
sys.exit(main())
File ".../qemu/tests/docker/docker.py", line 340, in main
return args.cmdobj.run(args, argv)
File ".../qemu/tests/docker/docker.py", line 235, in run
dkr = Docker()
File ".../qemu/tests/docker/docker.py", line 102, in __init__
self._command = _guess_docker_command()
File ".../qemu/tests/docker/docker.py", line 49, in _guess_docker_command
commands_txt)
Exception: Cannot find working docker command. Tried:
docker
sudo -n docker
.../qemu/tests/docker/Makefile.include:47: recipe for target 'docker-image-centos6' failed
make: *** [docker-image-centos6] Error 1
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1474369559-16903-1-git-send-email-ehabkost@redhat.com>
[exceptions.OSError -> OSError and drop the import. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we allow CPU hot unplug on a few platforms, we can end up in a
situation where we don't have a CPU with index 0. Or at least we could,
if we didn't have code to explicitly prohibit unplug of CPU 0.
Longer term we want to allow CPU 0 unplug, this patch is an early step in
allowing this, by removing an assumption in the monitor code that CPU 0
always exists.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Rewrote commit message to better explain background]
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Only the POWER[789] CPUs should have the ARCH_206 bit set. This is what the
linux kernel does. I guess this was also the intention of commit 0e019746.
We have to make sure all *206 bits are set.
Before this patch, the flags check in the GET_FEATURES2 macro returned true
if _any_ bit was set. This worked well as long as there was only one bit
set in the 'flag' parameter. But as explained before, we have to make sure
all bits in the 'flag' parameter are set.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently refuses to start with KVM-PR and only prints out
qemu: fatal: Unknown MMU model 851972
when being started there. This is because commit 4322e8ced5
("ppc: Fix 64K pages support in full emulation") introduced a new
POWERPC_MMU_64K bit to indicate support for this page size, but
it never gets cleared on KVM-PR if the host kernel does not support
this. Thus we've got to turn off this bit in the mmu_model for KVM-PR.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix inconsistent irq status, because of this in the trace logs, for e.g.
LSI status was 0x7, i.e. XICS_STATUS_ASSERTED, XICS_STATUS_SENT and
XICS_STATUS_REJECTED all set, which did not make sense. So the REJECTED
would have been set in earlier interrupt cycle, and then asserted and
sent in this current one.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Use 'true' instead of '1' for call to check_tlb_flush()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We flush the qemu TLB lazily. check_tlb_flush is called whenever we hit
a context synchronizing event or instruction that requires a pending
flush to be performed.
However, we fail to handle broadcast TLB flush operations. In order to
fix that efficiently, we want to differentiate whether check_tlb_flush()
needs to only apply pending local flushes (isync instructions,
interrupts, ...) or also global pending flush operations. The latter is
only needed when executing instructions that are defined architecturally
as synchronizing global TLB flush operations. This in our case is
ptesync on BookS and tlbsync on BookE along with the paravirtualized
hypervisor calls.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Changed gen_check_tlb_flush() to also take a bool, and fixed
some spelling errors in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduces bit-flag in CPUPPCState::tlb_need_flush:
TLB_NEED_LOCAL_FLUSH (0x1) - Flush local tlb
This would indicate a pending local tlb flush (isync instructions,
interrupts, ...)
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e17 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
darn: Deliver A Random Number
Currently return invalid random number for all the case. This needs
proper algorithm to provide cryptographically suitable random data.
Reading from /dev/random can block and that is not an expected behaviour
while the cpu instruction is getting executed. Moreover, /dev/random
would only work for linux-user
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Added minor clang warning fix for ppc32 target]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stxsibx - Store VSX Scalar as Integer Byte Indexed
stxsihx - Store VSX Scalar as Integer Halfword Indexed
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxspltib: VSX Vector Splat Immediate Byte
Copy the immediate byte in each byte of target VSR
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Being a 16byte operation, qemu_ld/st still does not support this. Move
this out so other store operation can use qemu_ld/st in the following
patch. Also, convert it to two MO_Q operations for stqcx.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use macro for st64 as well, this changes the function signature from
gen_qemu_st64 => gen_qemu_st64_i64. Replace this at all the call sites.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use macro for ld64 as well, this changes the function signature from
gen_qemu_ld64 => gen_qemu_ld64_i64. Replace this at all the call sites.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original pc_to_adb_keycode mapping did have several keys that were
incorrectly mapped. This patch fixes these mappings.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The old pc scancode translation is replaced with QEMU's QKeyCode. This is just
a mechanical substitution, which a number of broken mappings left in.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Define spapr_alloc_init()/spapr_alloc_init_flags()/spapr_alloc_uninit()
to allocate and use SPAPR guest memory
Define qtest_spapr_vboot()/qtest_spapr_boot()/qtest_spapr_shutdown()
to start SPAPR guest with QOSState initialized for it (memory management)
Move qtest_irq_intercept_in() from generic part to PC part.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Power ISA 2.x has deleted the rfi instruction and rfid shoud be used
instead on cpus following this instruction set or later.
This will raise an invalid exception when rfi is used on such
processors: Book3S 64-bit processors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: the required fix in openbios, commit b747b6acc272 ('ppc: use
rfid when running under a CPU from the 970 family.'), is now
merged in qemu under commit 5cebd885d0 ('Update OpenBIOS
images to b747b6a built from submodule.') ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are some powerpc related files in the QEMU source tree
which are currently not covered by the MAINTAINERS file and
thus not properly classified by the get_maintainer.pl script.
So let's add them to the proper sections.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Basic idea of this script is to check the git log for URLs
to the QEMU bugtracker at launchpad.net and to figure out
whether the related bug has been marked there as "Fix released"
(i.e. closed) already. So this script can e.g. be used after
each public release of QEMU to check whether there are any
bug tickets that could be moved from "Fix committed" (or another
state if the author of the patch forgot to update the bug ticket)
to "Fix released".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1474486942-18754-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Segfault happens when leaving qemu with msmouse backend:
#0 0x00007fa8526ac975 in raise () at /lib64/libc.so.6
#1 0x00007fa8526add8a in abort () at /lib64/libc.so.6
#2 0x0000558be78846ab in error_exit (err=16, msg=0x558be799da10 ...
#3 0x0000558be7884717 in qemu_mutex_destroy (mutex=0x558be93be750) at ...
#4 0x0000558be7549951 in qemu_chr_free_common (chr=0x558be93be750) at ...
#5 0x0000558be754999c in qemu_chr_free (chr=0x558be93be750) at ...
#6 0x0000558be7549a20 in qemu_chr_delete (chr=0x558be93be750) at ...
#7 0x0000558be754a8ef in qemu_chr_cleanup () at qemu-char.c:4643
#8 0x0000558be755843e in main (argc=5, argv=0x7ffe925d7118, ...
The chr was freed by msmouse close callback before chardev cleanup,
Then qemu_mutex_destroy triggered raise().
Because freeing chr is handled by qemu_chr_free_common, Remove the free from
msmouse_chr_close to avoid double free.
Fixes: c1111a24a3
Cc: qemu-stable@nongnu.org
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20160915143158.4796-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When qemu uses iscsi devices in sg mode, iscsilun->block_size
is left at 0. Prior to commits cf081fca and similar, when
block limits were tracked in sectors, this did not matter:
various block limits were just left at 0. But when we started
scaling by block size, this caused SIGFPE.
Then, in a later patch, commit a5b8dd2c added an assertion to
bdrv_open_common() that request_alignment is always non-zero;
which was not true for SG mode. Rather than relax that assertion,
we can just provide a sane value (we don't know of any SG device
with a block size smaller than qemu's default sizing of 512 bytes).
One possible solution for SG mode is to just blindly skip ALL
of iscsi_refresh_limits(), since we already short circuit so
many other things in sg mode. But this patch takes a slightly
more conservative approach, and merely guarantees that scaling
will succeed, while still using multiples of the original size
where possible. Resulting limits may still be zero in SG mode
(that is, we mostly only fix block_size used as a denominator
or which affect assertions, not all uses).
Reported-by: Holger Schranz <holger@fam-schranz.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <1473283640-15756-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'char const' means the same thing as 'const char', but we
use the former in only a handful of places and we use the
latter over six thousand times. Switch the imx reg_name()
functions to bring them in line with everything else.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macros ISSPACE, strneq, NUM_ELEMS and NUM_ARM_REGNAMES
are defined in disas/arm.c but never used. Remove the
unnecessary definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Whilst according to the Zynq TRM this device covers a register region of
0x000 - 0x120. The register region is also shared with XADCIF prefix
registers at 0x100 and above. Due to how the devcfg and the xadc devices
are implemented in QEMU these are separate models with individual mmio
regions. As such the region registered by the devcfg overlaps with the
xadc when initialized in a machine model (e.g. xilinx-zynq-a9).
This patch fixes up the incorrect region size, where
XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in
size. As well as setting the region size to the 0x0 - 0x100 region so
that an xadc device instance can be registered in the correct region to
pair with the devcfg device instance.
Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118:
dev: xlnx.ps7-dev-cfg, id ""
mmio 00000000f8007000/0000000000000460
dev: xlnx,zynq-xadc, id ""
mmio 00000000f8007100/0000000000000020
Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4:
dev: xlnx.ps7-dev-cfg, id ""
mmio 00000000f8007000/0000000000000100
dev: xlnx,zynq-xadc, id ""
mmio 00000000f8007100/0000000000000020
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160921180911.32289-1-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's define an object class for each Aspeed SoC we support. A
AspeedSoCInfo struct gathers the SoC specifications which can later be
used by an instance of the class or by a board using the SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a name replacement to prepare ground for other SoCs.
Let's also remove the AST2400_SMC_BASE definition from the address
space mappings, as it is not used. This controller was removed from
the Aspeed SoC AST2500, so this provides us a better common base for
the address space mapping on both SoCs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The parsing of KVM_SET_LAPIC's input depends on the current value of the
APIC base MSR---which indeed is stored in APICCommonState---but for historical
reasons APIC base is set through KVM_SET_SREGS together with cr8 (which is
really just the APIC TPR) and the actual "special CPU registers".
APIC base must now be set before the actual LAPIC registers, so do that
in kvm_apic_put. It will be set again to the same value with KVM_SET_SREGS,
but that's not a big issue.
This only happens since Linux 4.8, which checks for x2apic mode in
KVM_SET_LAPIC. However it's really a QEMU bug; until the recent
commit 78d6a05 ("x86/lapic: Load LAPIC state at post_load", 2016-09-13)
QEMU was indeed setting APIC base (via KVM_SET_SREGS) before the other
LAPIC registers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
linux-user changes since 2.7 release
# gpg: Signature made Thu 22 Sep 2016 13:09:17 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160915: (26 commits)
linux-user: fix TARGET_NR_select
linux-user: Fix incorrect offset of tuc_stack in ARM do_sigframe_return_v2
linux-user: Sanity check clone flags
linux-user: Remove unnecessary nptl_flags variable from do_fork()
linux-user: Implement force_sigsegv() via force_sig()
linux-user: SIGSEGV from sigreturn need not be fatal
linux-user: ARM: Give SIGSEGV if signal frame setup fails
linux-user: SIGSEGV on signal entry need not be fatal
linux-user: Pass si_type information to queue_signal() explicitly
linux-user: Recheck for pending synchronous signals too
linux-user: ppc64: set MSR_CM bit for BookE 2.06 MMU
linux-user: Use correct target SHMLBA in shmat()
linux-user: Use glib malloc functions in load_symbols()
linux-user: Check dump_write() return in elf_core_dump()
linux-user: Fix error handling in flatload.c target_pread()
linux-user: Fix incorrect use of host errno in do_ioctl_dm()
linux-user: Check lock_user() return value for NULL
linux-user: Pass missing MAP_ANONYMOUS to target_mmap() call
linux-user: report signals being taken in strace output
linux-user: Range check the nfds argument to ppoll syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
seccomp branch queue
# gpg: Signature made Wed 21 Sep 2016 10:30:09 BST
# gpg: using RSA key 0xFD0CFF5B12F8BD2F
# gpg: Good signature from "Eduardo Otubo (Software Engineer @ ProfitBricks) <eduardo.otubo@profitbricks.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C96 46B6 E1D1 C38A F2EC 3FDE FD0C FF5B 12F8 BD2F
* remotes/otubo/tags/pull-seccomp-20160921:
seccomp: adding getrusage to the whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
struct target_ucontext_v2 is not at the begining of the signal frame,
therefore do_sigaltstack was being passed bogus arguments.
As the offset depends on the type of signal frame fixed by passing in the
beginning of the context from do_sigreturn_v2 and do_rt_sigreturn_v2.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We currently make no checks on the flags passed to the clone syscall,
which means we will not fail clone attempts which ask for features
that we can't implement. Add sanity checking of the flags to clone
(which we were already doing in the "this is a fork" path, but not
for the "this is a new thread" path), tidy up the checking in
the fork path to match it, and check that the fork case isn't trying
to specify a custom termination signal.
This is helpful in causing some LTP test cases to fail cleanly
rather than behaving bizarrely when we let the clone succeed
but didn't provide the semantics requested by the flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 'nptl_flags' variable in do_fork() is set to a copy of
'flags', and then the CLONE_NPTL_FLAGS are cleared out of 'flags'.
However the only effect of this is that the later check on
"if (flags & CLONE_PARENT_SETTID)" is never true. Since we
will already have done the setting of parent_tidptr in clone_func()
in the child thread, we don't need to do it again.
Delete the dead if() and the clearing of CLONE_NPTL_FLAGS from
'flags', and then use 'flags' where we were previously using
'nptl_flags', so we can delete the unnecessary variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Now that we have a force_sig() with the semantics we need,
we can implement force_sigsegv() to call it rather than
open-coding the call to queue_signal().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the sigreturn syscall fails to read memory then this causes a
SIGSEGV, but this is not necessarily a fatal signal -- the guest
process can catch it.
We don't implement this correctly because the behaviour of QEMU's
force_sig() function has drifted away from the kernel function of the
same name -- ours now does "always do a guest core dump and abort
execution", whereas the kernel version simply forces the guest to
take a signal, which may or may not eventually cause a core dump.
Rename our force_sig() to dump_core_and_abort(), and provide a
force_sig() which acts more like the kernel version as the sigreturn
implementations expect it to. Since force_sig() now returns, we must
update all the callsites to return -TARGET_QEMU_ESIGRETURN so that
the main loop doesn't change the guest registers before the signal
handler is invoked.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 32-bit ARM signal frame setup code was just bailing out
on error returns from lock_user_struct calls, without
generating the SIGSEGV that should happen here. Wire up
error return codes to call force_sigsegv().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
A failed write to memory trying to set up the signal frame
should trigger a SIGSEGV, but this need not be fatal: the
guest has a chance to catch it. Implement this via a force_sigsegv()
function with the same behaviour as the kernel function of that
name: make sure that we don't try to re-take a failed SIGSEGV,
and force a synchronous signal.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of assuming in queue_signal() that all callers are passing
a siginfo structure which uses the _sifields._sigfault part of the
union (and thus a si_type of QEMU_SI_FAULT), make callers pass
the si_type they require in as an argument.
[RV adjusted to apply]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In process_pending_signals() we restart the scan of possible
pending signals after calling handle_pending_signal() in
case some other signal has been generated. This rescan
should also include a check for a new synchronous signal
since those are in fact the only kind of new signal that
the signal frame setup process might produce.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
64 bit user mode doesn't work for the e5500 core because the MSR_CM bit is
not set which enables the 64 bit mode for this MMU model. Memory addresses
are truncated to 32 bit, which results in "Invalid data memory access"
error messages. Fix it by setting the MSR_CM bit for this MMU model.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
* if the SHM_RND flag is passed, the address is rounded
down to a SHMLBA boundary
* if SHM_RND is not passed, then the call is failed EINVAL
if the address is not a multiple of SHMLBA
Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.
Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Switch to using the glib malloc functions in load_symbols();
this deals with a Coverity complaint about possible
integer overflow calculating the allocation size with
'nsyms * sizeof(*syms)'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
One of the calls to dump_write() in elf_core_dump() was missing
a check for failure (spotted by Coverity). Add the check to
bring it into line with the other calls from this function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The flatload.c target_pread() function is supposed to return
0 on success or negative host errnos; however it wasn't
checking lock_user() for failure or returning the errno from
the pread() call. Fix these problems (the first of which is
noted by Coverity).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
do_ioctl_dm() should return target errno values, not host ones;
correct an accidental use of a host errno in an error path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
lock_user() can return NULL, which typically means the syscall
should fail with EFAULT. Add checks in various places where
Coverity spotted that we were missing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
A target_mmap() call in load_elf_binary() was missing the MAP_ANONYMOUS
flag. (Spotted by Coverity, because target_mmap() will try to use
-1 as the filedescriptor in this case.)
This has never been noticed because the code in question is for
handling ancient SVr4 iBCS2 binaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Native strace reports when the process being traced takes a signal:
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
Report something similar when QEMU is doing its internal strace of
the guest process and is about to deliver it a signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Do an initial range check on the ppoll syscall's nfds argument,
to avoid possible overflow in the calculation of the lock_user()
size argument. The host kernel will later apply the rather lower
limit based on RLIMIT_NOFILE as appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel checks that the maxevents parameter to epoll_wait
is non-negative and not larger than EP_MAX_EVENTS. Add this
check to our implementation, so that:
* we fail these cases EINVAL rather than EFAULT
* we don't pass negative or overflowing values to the
lock_user() size calculation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The linux utimensat syscall differs in semantics from the
libc function because the syscall combines the features
of utimensat() and futimens(). Rather than trying to
split these apart in order to call the two libc functions
which then call the same underlying syscall, just always
directly make the host syscall. This fixes bugs in some
of the corner cases which should return errors from the
syscall but which we were incorrectly directing to futimens().
This doesn't reduce the set of hosts that our syscall
implementation will work on, because if the direct syscall
fails ENOSYS then the libc functions would also fail ENOSYS.
(The system call has been in the kernel since 2.6.22 anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The POSIX standard mandates that for a connected socket recvfrom()
must ignore the msg_name and msg_namelen fields. This is awkward
for QEMU because we will attempt to copy them from guest address
space. Handle this by not immediately returning a TARGET_EFAULT
if the copy failed, but instead passing a known-bad address
to the host kernel, which can then return EFAULT or ignore the
value appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sendmsg and recvmsg syscalls use a different errno to indicate
an overlarge iovec length from readv and writev. Handle this
special case in do_sendrcvmsg_locked() to avoid getting the
default errno returned by lock_iovec().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the kernel the length of an iovec is generally handled as
an unsigned long, not an integer; fix the parameter to
lock_iovec() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
getrusage is used in a number of places throughout the qemu codebase
(notably, in crypto/pbkdf.c). Without this syscall being whitelisted,
qemu ends up getting killed by the kernel whenever you try to connect to
a VNC console.
Signed-off-by: Brian Rak <brak@gameservers.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Source disk is created and filled with test data before each test case.
Instead initialize it once for the whole unit.
Test disk filling patterns are merged into one pattern.
Also TestSetSpeed used different image_len for source and target (by
mistake) - this is automatically fixed here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1470748523-13856-1-git-send-email-vsementsov@virtuozzo.com
Reviewed-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 'block-commit' command has a 'top' parameter to specify the
topmost node from which the data is going to be copied.
[E] <- [D] <- [C] <- [B] <- [A]
In this case if [C] is the top node then this is the result:
[E] <- [B] <- [A]
[B] must be modified so its backing image string points to [E] instead
of [C]. commit_start() takes care of reopening [B] in read-write
mode, and commit_complete() puts it back in read-only mode once the
operation has finished.
In order to find [B] (the overlay node) we look for the node that has
[C] (the top node) as its backing image. However in commit_complete()
we're doing it after [C] has been removed from the chain, so [B] is
never found and remains in read-write mode.
This patch gets the overlay node before the backing chain is
manipulated.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1471836963-28548-1-git-send-email-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.
In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.
All the necessary module information is located in a new structure found
in module_block.h
This spoils the purpose of 5505e8b76f (block/dmg: make it modular).
Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
block_driver_modules[], so it will not cause a compile error when
empty]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a basic dd subcommand analogous to dd(1) to qemu-img.
For the start, this implements the bs, if, of and count options and requires
both if and of to be specified (no stdin/stdout if not specified) and doesn't
support tty, pipes, etc.
The image format must be specified with -O for the output if the raw format
is not the intended one.
Two tests are added to test qemu-img dd.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id: 20160810024312.14544-1-fullmanet@gmail.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Moved test 158 to 170]
Signed-off-by: Max Reitz <mreitz@redhat.com>
TARGET_PAGE_MASK, as defined, has type "int". We need to extend
that to the proper target width before oring in an "unsigned".
Signed-off-by: Richard Henderson <rth@twiddle.net>
Running cpuid instructions with a simple run like:
i386-linux-user/qemu-i386 tests/tcg/sha1-i386
Results in the following assert:
#0 0x00007ffff64246f5 in raise () from /lib64/libc.so.6
#1 0x00007ffff64262fa in abort () from /lib64/libc.so.6
#2 0x00007ffff7937ec5 in g_assertion_message () from /lib64/libglib-2.0.so.0
#3 0x00007ffff7937f5a in g_assertion_message_expr () from /lib64/libglib-2.0.so.0
#4 0x000055555561b54c in apicid_bitwidth_for_count (count=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:58
#5 0x000055555561b58a in apicid_smt_width (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:67
#6 0x000055555561b5c3 in apicid_core_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:82
#7 0x000055555561b5e3 in apicid_pkg_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:89
#8 0x000055555561dd86 in cpu_x86_cpuid (env=0x555557999550, index=4, count=3, eax=0x7fffffffcae8, ebx=0x7fffffffcaec, ecx=0x7fffffffcaf0, edx=0x7fffffffcaf4) at /home/elmarco/src/qemu/target-i386/cpu.c:2405
#9 0x0000555555638e8e in helper_cpuid (env=0x555557999550) at /home/elmarco/src/qemu/target-i386/misc_helper.c:106
#10 0x000055555599dc5e in static_code_gen_buffer ()
#11 0x00005555555952f8 in cpu_tb_exec (cpu=0x5555579912d0, itb=0x7ffff4371ab0) at /home/elmarco/src/qemu/cpu-exec.c:166
#12 0x0000555555595c8e in cpu_loop_exec_tb (cpu=0x5555579912d0, tb=0x7ffff4371ab0, last_tb=0x7fffffffd088, tb_exit=0x7fffffffd084, sc=0x7fffffffd0a0) at /home/elmarco/src/qemu/cpu-exec.c:517
#13 0x0000555555595e50 in cpu_exec (cpu=0x5555579912d0) at /home/elmarco/src/qemu/cpu-exec.c:612
#14 0x00005555555c065b in cpu_loop (env=0x555557999550) at /home/elmarco/src/qemu/linux-user/main.c:297
#15 0x00005555555c25b2 in main (argc=2, argv=0x7fffffffd848, envp=0x7fffffffd860) at /home/elmarco/src/qemu/linux-user/main.c:4803
The fields are set in qemu_init_vcpu() with softmmu, but it's a stub
with linux-user.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
commit 78d6a05d2f
("x86/lapic: Load LAPIC state at post_load")
has some debugging leftovers.
Drop them.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This avoids a double hand-full of magic numbers in the
xsave and xrstor helper functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The only remaining function of qmp-commands.hx is to let us generate
qmp-commands.txt from it. Replace qmp-commands.hx by qmp-commands.txt.
We intend to move the documentation into the QAPI schema and generate
qapi-commands.txt from it, but not right now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Replace the old manual dispatch and validation code by the generic one
provided by qapi common code.
Note that it is now possible to call the following commands that used to
be disabled by compile-time conditionals:
- dump-skeys
- query-spice
- rtc-reset-reinjection
- query-gic-capabilities
Their fallback functions return an appropriate "feature disabled" error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated marshal functions do not visit arguments from commands
that take no arguments. Thus they fail to catch invalid
members. Visit the arguments, if provided, to throw an error in case of
invalid members.
Currently, qmp_check_client_args() checks for invalid arguments and
correctly catches this case. When switching to qmp_dispatch() we want to
keep that behaviour. The commands using 'O' may have arbitrary
arguments, and must have 'gen': false in the qapi schema to skip the
generated checks.
Old/new diff:
void qmp_marshal_stop(QDict *args, QObject **ret, Error **errp)
{
Error *err = NULL;
+ Visitor *v = NULL;
- (void)args;
+ if (args) {
+ v = qmp_input_visitor_new(QOBJECT(args), true);
+ visit_start_struct(v, NULL, NULL, 0, &err);
+ if (err) {
+ goto out;
+ }
+
+ if (!err) {
+ visit_check_struct(v, &err);
+ }
+ visit_end_struct(v, NULL);
+ if (err) {
+ goto out;
+ }
+ }
qmp_stop(&err);
+
+out:
error_propagate(errp, err);
+ visit_free(v);
+ if (args) {
+ v = qapi_dealloc_visitor_new();
+ visit_start_struct(v, NULL, NULL, 0, NULL);
+
+ visit_end_struct(v, NULL);
+ visit_free(v);
+ }
}
The new code closely resembles code for a command with arguments.
Differences:
- the visit of the argument and its cleanup struct don't visit any
members (because there are none).
- the visit of the argument struct and its cleanup are conditional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-14-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We currently define QMP commands in two places: the QAPI schema and
qmp-commands.hx. The latter is preprocessed, the former is not. We
use the preprocessor to suppress configuration-specific commands. For
instance, query-spice is only available #ifdef CONFIG_SPICE.
QMP command dispatch and query-commands use the qmp-commands.hx
definition, and thus obey the #ifdeffery there. Good, because it lets
QMP clients probe for available features more easily.
query-qmp-schema uses the QAPI schema, and thus lists the
configuration-specific commands even when they're unavailable. Not so
good.
We're about to flip command dispatch and query-commands to the
non-middle-mode command registry, which uses the QAPI schema, so we
can ditch qmp-commands.hx. To avoid regressing query-commands,
arrange for commands that are suppressed with the preprocessor now to
be unregistered with that registry. This will keep them unavailable
and out of query-commands when we flip command dispatch and
query-commands to that registry, exactly as before.
This is a hack. The proper solution is to support
configuration-specific commands in the QAPI schema. Mark it FIXME.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20160912091913.15831-8-marcandre.lureau@redhat.com>
Since a few commands are using 'gen': false, they are not registered
automatically by the generator. Register manually instead.
This is in preparation for removal of qapi 'middle' mode generation.
Note that qmp_init_marshal() function isn't run yet, so the commands
aren't actually registered, until module_call_init(MODULE_INIT_QAPI) is
added in a later patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is very useful to know about TLS cert verification
status when debugging, so add a trace point for it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently pbkdf is only supported with SHA1 and SHA256. Expand
this to support all algorithms known to QEMU.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
cryptsetup recently increased the default pbkdf2 time to 2 seconds
to partially mitigate improvements in hardware performance wrt
brute-forcing the pbkdf algorithm. This updates QEMU defaults to
match.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When calculating iterations for pbkdf of the key slot
data, we had a /= 2, which was copied from identical
code in cryptsetup. It was always unclear & undocumented
why cryptsetup had this division and it was recently
removed there, too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when timing the pbkdf algorithm a fixed key
size of 32 bytes is used. This results in inaccurate
timings for certain hashes depending on their digest
size. For example when using sha1 with aes-256, this
causes us to measure time for the master key digest
doing 2 sha1 operations per iteration, instead of 1.
Instead we should pass in the desired key size to the
timing routine that matches the key size that will be
used for real later.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'out' buffer will hold a key derived from master
password, so it is best practice to clear this buffer
when no longer required.
At this time, the code isn't worrying about locking
buffers into RAM to prevent swapping sensitive data
to disk.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qcrypto_pbkdf_count_iters method uses a 64 bit int
but then checks its value against INT32_MAX before
returning it. This bounds check is premature, because
the calling code may well scale the iteration count
by some value. It is thus better to return a 64-bit
integer and let the caller do range checking.
For consistency the qcrypto_pbkdf method is also changed
to accept a 64bit int, though this is somewhat academic
since nettle is limited to taking an 'int' while gcrypt
is limited to taking a 'long int'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This pull request contains:
- a fix for a regression introduced in 2.7
- basic functional testing for virtio-9p
- some code cleanups for 9pfs
# gpg: Signature made Mon 19 Sep 2016 10:40:17 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: fix potential segfault during walk
tests: virtio-9p: add basic configuration test
tests: virtio-9p: introduce start/stop functions
9pfs: introduce v9fs_path_sprintf() helper
9pfs: drop useless v9fs_string_null() function
9pfs: drop duplicate line in proxy backend
9pfs: drop unused fmt strings in the proxy backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the call to fid_to_qid() returns an error, we will call v9fs_path_free()
on uninitialized paths.
It is a regression introduced by the following commit:
56f101ecce 9pfs: handle walk of ".." in the root directory
Let's fix this by initializing dpath and path before calling fid_to_qid().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[groug: updated the changelog to indicate this is regression and to provide
the offending commit SHA1]
Signed-off-by: Greg Kurz <groug@kaod.org>
We have everything needed for virtio-ccw revision 2 wired up now.
Bump the maximum supported revision reported on a device basis to
the guest so they can make use of it.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
cpu model was merged with 2.8, it is wrong to abuse ri_allowed which
was enabled with 2.7.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Except virtio-9p, all virtio-* tests are orphan. This patch tries to fix
it, according to the following logic:
- when the related subsystem has its own section in MAINTAINERS, the test
is added there
- otherwise it is added to the "parent" section (aka. SCSI, Network devices,
virtio)
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
tcg queued patches
# gpg: Signature made Fri 16 Sep 2016 16:14:20 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-tcg-20160916:
tcg: Optimize fence instructions
target-i386: Generate fences for x86
target-aarch64: Generate fences for aarch64
target-arm: Generate fences in ARMv7 frontend
target-alpha: Generate fence op
tcg/tci: Add support for fence
tcg/sparc: Add support for fence
tcg/s390: Add support for fence
tcg/ppc: Add support for fence
tcg/mips: Add support for fence
tcg/ia64: Add support for fence
tcg/arm: Add support for fence
tcg/aarch64: Add support for fence
tcg/i386: Add support for fence
Introduce TCGOpcode for memory barrier
cpu-exec: Check -dfilter for -d cpu
tcg: Merge GETPC and GETRA
tcg: Support arbitrary size + alignment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit optimizes fence instructions. Two optimizations are
currently implemented: (1) unnecessary duplicate fence instructions,
and (2) merging weaker fences into a stronger fence.
[rth: Merge tcg_optimize_mb back into tcg_optimize, so that we only
loop over the opcode stream once. Merge "unrelated" weaker barriers
into one stronger barrier.]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160823134825.32578-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This commit introduces the TCGOpcode for memory barrier instruction.
This opcode takes an argument which is the type of memory barrier
which should be generated.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160714202026.9727-2-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The return address argument to the softmmu template helpers was
confused. In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL. However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.
Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.
This makes GETPC and GETRA identical. Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.
In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds PCI init code and a basic test that checks the device config
matches what is passed on the command line.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This helper is similar to v9fs_string_sprintf(), but it includes the
terminating NUL character in the size field.
This is to avoid doing v9fs_string_sprintf((V9fsString *) &path) and
then bumping the size.
Affected users are changed to use this new helper.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The v9fs_string_null() function just calls v9fs_string_free(). Also it
only has 4 users, whereas v9fs_string_free() has 87.
This patch converts users to call directly v9fs_string_free() and drops
the useless function.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This double free did not cause harm because v9fs_string_free() sets
str->data to NULL and g_free(NULL) is valid.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The v9fs_request() function doesn't use its fmt argument: it passes literal
format strings to proxy_marshal() for all commands.
This patch simply drops the unused fmt argument and updates all callers
accordingly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VMState added by this patch preserves correct
loading of the PC speaker device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090133.6440.65457.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes kvmvapic state change handler.
It clears vmsentry field to allow recreating it
at further vmstate loads.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090127.6440.48793.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Tue, Jun 14, 2016 at 04:44:57PM +0100, Daniel P. Berrange wrote:
> The g_test_trap_subprocess() method does not work on the
> Mingw32 platform, causing the test-qdev-global-props
> test case to abort
>
> (test-logging.exe:230): GLib-ERROR **: g_test_trap_subprocess()
> failed: Failed to execute helper program (No such file or directory)
>
> This failure was introduced a while ago in
>
> commit 2177801a48
> Author: Eduardo Habkost <ehabkost@redhat.com>
> Date: Fri Aug 8 16:03:27 2014 -0300
>
> test-qdev-global-props: Run tests on subprocess
>
> Modify the configure time check to avoid enabling this feature
> on Mingw, rather than trying to rewrite the test to avoid this
> feature.
I would do the following instead, just in case we have extra code
looking at $glib_subprocess one day.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Another attempt to fix the bug 1596870.
When creating new disk backed by remote file accessed via HTTPS and the
backing file has zero length, qemu-img terminates with uniformative
error message:
qemu-img: disk.qcow2: CURL: Error opening file:
While it may not make much sense to operate on empty file, other block
backends (e.g. raw backend for regular files) seem to allow it. This
patch fixes it for the curl backend and improves the reported error.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The page that was previously linked in the source code and the README file is
no longer available so it now returns a 404 error message.
This puts a previous snapshot from archive.org instead.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
include/hw/xilinx.h is gone since commit d5001cf, drop.
include/hw/*/xlnx*.c is a typo, change .c to .h.
include/hw/acpi/piix.h is a typo, change piix.h to piix4.h.
hw/i386/*dsl and scripts/acpi*py are gone since since commit 9fc6502,
drop.
hw/virtio/dataplane/* are gone since commit fee089e, drop.
ICC Bus is gone since commit dfeb867, drop.
block/raw-aio.h was moved to include/block/raw-aio.h in commit
0187f5c, update.
Tracked down with
for i in `grep "^[FX]: " MAINTAINERS | sed "s/^.: //"`
do if [ ! -e "$i" ]; then echo "$i"; fi
done
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This header seems to belong to the guest CPU section since it
contains prototypes for cpus.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the files in
include/hw/sh4/ belong to SH4.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the file in
include/hw/tricore/ belongs to TriCore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the file in
include/hw/unicore32/ belongs to UniCore32.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the QEMU monitor pane of the gtk user interface, the backspace
key is not working at all. This happens because of a missing mapping
of the key in the qcode_to_keysym[] table. Thus let's add an entry
there to get the backspace key working again.
Buglink: https://bugs.launchpad.net/qemu/+bug/1611979
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
host-utils.h and timer.h are included twice in tcg.c.
One time should be enough.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The HPPA backend has been removed by the following commit:
802b508123
tcg-hppa: Remove tcg backend
But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).
For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.
Signed-off-by: Andrew Dutcher <andrew@andrewdutcher.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1471392895-17324-1-git-send-email-andrew@andrewdutcher.com
[PMM: changed "1 << 63" to "1ULL << 63" to fix compile errors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In user-mode emulation env->idt.base memory is
allocated in linux-user/main.c with
size 8*512 = 4096 (for 64-bit).
When fake interrupt EXCP_SYSCALL is thrown
do_interrupt_user checks destination privilege level
for this fake exception, and tries to read 4 bytes
at address base + (256 * 2^4)=4096, that causes
segfault.
Privlege level was checked only for int's, so lets
read dpl from memory only for this case.
Signed-off-by: Stanislav Shmarov <snarpix@gmail.com>
Message-Id: <1473773008-2588376-1-git-send-email-snarpix@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If giving QEMU a log arg which asks to enable multiple
different trace event patterns such as
$QEMU -d trace:qio*,trace:qcrypto*
the parser will then invoke
trace_enable_events("qio*,trace:qcrypto*")
trace_enable_events("qcrypto*")
as when finding a 'trace:' prefix, it is not clever
enough to strip anything after the next comma. As
a result only the last 'trace:' match ever works.
Rather than trying to be more clever with parsing the
command line arg in place, simplify the code by
using g_strsplit to break it into individual strings
on ','. These resulting pieces can be directly used
without worrying about trailing data from the next
option.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473186343-16704-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function qemu_chr_alloc returns NULL if it failed to open logfile by any reason,
says no write permission. For backends tty, stdio and msmouse, They need to
check this return value to avoid segfault in this case.
Signed-off-by: Lin Ma <lma@suse.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-Id: <20160914062250.22226-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure reset zeroes TSC_AUX, XCR0, PKRU. Move XSTATE_BV from the
"vmstate only" section to the "KVM only" section.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add -kernel_irqchip=split
./x86-run x86/eventinj.flat
qemu-system-x86_64 -enable-kvm -machine kernel_irqchip=split -cpu host
-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4 -vnc
none -serial stdio -device pci-testdev -kernel x86/eventinj.flat
enabling apic
paging enabled
cr0 = 80010011
cr3 = 7fff000
cr4 = 20
Sending vec 33 and 62 and mask one with TPR
irq1 running
irq1 running
After 33/62 TPR test
FAIL: TPR
irq0 running
irq0 running
Both irq1 and irq0 are executing twice.
kvm_entry: vcpu 0
kvm_exit: reason MSR_WRITE rip 0x401f33 info 0 0
kvm_apic: apic_write APIC_EOI = 0x0
kvm_eoi: apicid 0 vector 62
kvm_msr: msr_write 80b = 0x0
kvm_entry: vcpu 0
kvm_exit: reason PENDING_INTERRUPT rip 0x401f35 info 0 0
kvm_userspace_exit: reason KVM_EXIT_IRQ_WINDOW_OPEN (7)
kvm_inj_virq: irq 62
kvm_entry: vcpu 0
kvm_exit: reason IO_INSTRUCTION rip 0x4016ec info 3fd0008 0
From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.
QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing. The printing calls
serial_update_irq() -> qemu_irq_lower() -> qemu_set_irq() ->
gsi_handler() -> qemu_set_irq() -> pic_irq_request() ->
apic_deliver_pic_intr() -> kvm_handle_interrupt()
kvm_handle_interrupt() does
interrupt_request |= CPU_INTERRUPT_HARD
which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.
This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473832464-3478-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is equivalent to memory_region_destructor_ram, use that one.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows uses object properties to determine the size of a file, so to
add object properties, we must also add a minimum set of new commands
and object properties. Most object properties are data that we already
have, except for the unique persistant object identifier. Windows
doesn't use this property, it seems, so we can cheat a bit and just use
the object handle for it.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: a741d0dd380cd7eb1695e1eb34ee6f341183f20a.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For ppc64le, gcc6 does extremely poorly with the Altivec code.
Moreover, on POWER7 and POWER8, a hand-optimized Altivec version
turns out to be no faster than the revised integer version, and
therefore not worth the effort.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The revised integer version is 4 times faster than the neon version
on an AppliedMicro Mustang. Even with hand scheduling and additional
unrolling I cannot make any neon version run as fast as the integer.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Load the LAPIC state during post_load (rather than when the CPU
starts).
This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.
Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent compilers can detect and inline manually-written bswap code,
but GCC 4.2.1 (the last GPLv2 version) cannot and generates really
awful code. Depending on how the compiler is configured, it might
also not want to generate bswap because it was not in i386. Using
asm is fine because TCG knows about bswap and all processors with
virtualization extensions also do.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prevent blank lines in documentation code blocks to be signalled as
incorrect trailing whitespace.
Code blocks in documentation are 4-column aligned, and blank lines in
them should have exactly 4 columns of trailing whitespace to prevent
QEMU's wiki to render them as separate code blocks.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <147325254382.22644.5531276787733455773.stgit@fimbulvetr.bsc.es>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Use the __atomic_*_n() primitives which take the value as argument. It
is not necessary to store the value locally before calling the
primitive, hence saving us a stack store and load.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160829171701.14025-1-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mux chardev was not checking the return value of any
qemu_chr_fe_write() call so would silently loose data
on EAGAIN.
Similarly the qemu_chr_fe_printf method would not check
errors and was not in a position to retry even if it
could check.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In PVSCSI paravirtual SCSI bus, pvscsi_convert_sglist can take a very
long time or go into an infinite loop due to two different bugs:
1) the request descriptor data length is defined to be 64 bit. While
building SG list from a request descriptor, it gets truncated to 32bit
in routine 'pvscsi_convert_sglist'. This could lead to an infinite loop
situation large 'dataLen' values when data_length is cast to uint32_t and
chunk_size becomes always zero. Fix this by removing the incorrect cast.
2) pvscsi_get_next_sg_elem can be called arbitrarily many times if the
element has a zero length. Get out of the loop early when this happens,
by introducing an upper limit on the number of SG list elements.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473108643-12983-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These issues cause respectively a QEMU crash and a leak of 2 bytes of
stack. They were discovered by VictorV of 360 Marvel Team.
Reported-by: Tom Victor <i-tangtianwen@360.cm>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's just remove some files from the pool of unmaintained files.
I am obviously not going to send pull requests only for stubs/, but
I will ack them if maintainers want that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For module build, .mo objects are passed to LINK and consumed in
process-archive-undefs. The reason behind that is documented in the
comment above process-archive-undefs.
Similarly, extract-libs should be called with .mo filtered out too.
Otherwise, the .mo-libs are added to the link command incorrectly,
spoiling the purpose of modularization.
Currently we don't have any .mo-libs usage, but it will be used soon
when we modularize more multi-source objects, like sdl and gtk.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1469600777-30413-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In fact, this function does not exactly perform a lookup by physical
address as it is descibed for comment on get_page_addr_code(). Thus
it may be a bit confusing to have "physical" in it's name. So rename it
to tb_htable_lookup() to better reflect its actual functionality.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-13-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lock contention in the hot path of moving between existing patched
TranslationBlocks is the main drag in multithreaded performance. This
patch pushes the tb_lock() usage down to the two places that really need
it:
- code generation (tb_gen_code)
- jump patching (tb_add_jump)
The rest of the code doesn't really need to hold a lock as it is either
using per-CPU structures, atomically updated or designed to be used in
concurrent read situations (qht_lookup).
To keep things simple I removed the #ifdef CONFIG_USER_ONLY stuff as the
locks become NOPs anyway until the MTTCG work is completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-10-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When invalidating a translation block, set an invalid flag into the
TranslationBlock structure first. It is also necessary to check whether
the target TB is still valid after acquiring 'tb_lock' but before calling
tb_add_jump() since TB lookup is to be performed out of 'tb_lock' in
future. Note that we don't have to check 'last_tb'; an already invalidated
TB will not be executed anyway and it is thus safe to patch it.
Suggested-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure atomicity and ordering of CPU's 'tb_flushed' access for future
translation block lookup out of 'tb_lock'.
This field can only be touched from another thread by tb_flush() in user
mode emulation. So the only access to be sequential atomic is:
* a single write in tb_flush();
* reads/writes out of 'tb_lock'.
In future, before enabling MTTCG in system mode, tb_flush() must be safe
and this field becomes unnecessary.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-5-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a small clean up. tb_find_fast() is a final consumer of this
variable so no need to pass it by reference. 'last_tb' is always updated
by subsequent cpu_loop_exec_tb() in cpu_exec().
This change also simplifies calling cpu_exec_nocache() in
cpu_handle_exception().
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-3-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
slave:~/.xie/qemu-colo # gcc --version
gcc (SUSE Linux) 4.3.4 [gcc-4_3-branch revision 152973]
slave:~/.xie/qemu-colo # make -j8
CC hw/net/e1000e_core.o
hw/net/e1000e_core.c:56: warning: ‘e1000e_set_interrupt_cause’ declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of ‘e1000e_set_interrupt_cause’ was here
LINK x86_64-softmmu/qemu-system-x86_64
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
val is assigned twice; the second one should be combined with "|".
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 67a1de0d created a generated version file, and, in some
circumstances, also a temporary file. Make sure 'git add .'
won't check them into the repository.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Display the slot number of mhp_pc_dimm_assigned_slot()
using "%d" without the "0x".
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Display an exception number, generally defined as an hexadecimal
number (for instance, EXCP_HLT is 0x10001).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no need to make sure that the memory is zeroed after the
allocation if we also immediatly fill the whole buffer afterwards
with memcpy(). Thus g_new0 should be g_new instead. But since we
are also doing a memcpy() here, we can also simply replace both
with g_memdup() instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tpm_cleanup is called from main() and also registered with atexit from
tpm_init. The function only visits the tpm_backends linked list, and the
atexit registration happens right after tpm_init fills in the list from
-tpmdev options. Therefore, the direct call is unnecessary. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0bab0ebb17 was supposed to fix
a mistake in the description of the leaky bucket algorithm, but the
version that finally landed after the review process was incorrect.
This patch solves that problem and hopefully clarifies the description
a bit better.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU's code relies on left shifts of signed integers always
being defined behaviour with the obvious 2s-complement
semantics. The only way to tell the compiler (and any
associated undefined-behaviour sanitizer) that we require a
C dialect with these semantics is to use the -fwrapv option.
This is a bit of a heavy hammer for the job as it also gives
us guaranteed semantics on integer arithmetic overflow which
in theory we don't require.
In an ideal world this would allow us to drop the warning
flag -Wno-shift-negative-value, but we must retain this to
avoid spurious warnings on clang versions predating the
fix to https://llvm.org/bugs/show_bug.cgi?id=25552.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473685808-9629-1-git-send-email-peter.maydell@linaro.org
Right after main_loop ends, we release various things but keep iothread
alive. The latter is not prepared to the sudden change of resources.
Specifically, after bdrv_close_all(), virtio-scsi dataplane get a
surprise at the empty BlockBackend:
(gdb) bt
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577
It is because the d->conf.blk->root is set to NULL, then
blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still
pointing to the iothread:
hw/scsi/virtio-scsi.c:543:
if (s->dataplane_started) {
assert(blk_get_aio_context(d->conf.blk) == s->ctx);
}
To fix this, let's stop iothreads before doing bdrv_close_all().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vq->avail.idx and vq->avail->ring[] are a 16bit values,
so read and write them with readw()/writew() instead of
readl()/writel().
To read/write a 16bit value with a 32bit accessor works fine
on little-endian CPU but not on big endian CPU.
[An equivalent patch for the writew() calls was also sent by
Zhang Shuai <zhangshuai13@huawei.com>.
--Stefan]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1472330054-22607-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normal backup(sync='none') workflow:
step 1. NBD peformance I/O write from client to server
qcow2_co_writev
bdrv_co_writev
...
bdrv_aligned_pwritev
notifier_with_return_list_notify -> backup_do_cow
bdrv_driver_pwritev // write new contents
step 2. drive-backup sync=none
backup_do_cow
{
wait_for_overlapping_requests
cow_request_begin
for(; start < end; start++) {
bdrv_co_readv_no_serialising //read old contents from Secondary disk
bdrv_co_writev // write old contents to hidden-disk
}
cow_request_end
}
step 3. Then roll back to "step 1" to write new contents to Secondary disk.
And for replication, we must make sure that we only read the old contents from
Secondary disk in order to keep contents consistent.
1) Replication workflow of Secondary
virtio-blk
^
-------> 1 NBD |
|| server 3 replication
|| ^ ^
|| | backing backing |
|| Secondary disk 6<-------- hidden-disk 5 <-------- active-disk 4
|| | ^
|| '-------------------------'
|| drive-backup sync=none 2
Hence, we need these interfaces to implement coarse-grained serialization between
COW of Secondary disk and the read operation of replication.
Example codes about how to use them:
*#include "block/block_backup.h"
static coroutine_fn int xxx_co_readv()
{
CowRequest req;
BlockJob *job = secondary_disk->bs->job;
if (job) {
backup_wait_for_overlapping_requests(job, start, end);
backup_cow_request_begin(&req, job, start, end);
ret = bdrv_co_readv();
backup_cow_request_end(&req);
goto out;
}
ret = bdrv_co_readv();
out:
return ret;
}
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1469602913-20979-4-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to reduce completion latency it makes sense to harvest completed
requests ASAP. Very fast backend device can complete requests just after
submission, so it is worth trying to check ring buffer in order to peek
completed requests directly after io_submit() has been called.
Indeed, this patch reduces the completions latencies and increases the
overall throughput, e.g. the following is the percentiles of number of
completed requests at once:
1th 10th 20th 30th 40th 50th 60th 70th 80th 90th 99.99th
Before 2 4 42 112 128 128 128 128 128 128 128
After 1 1 4 14 33 45 47 48 50 51 108
That means, that before the current patch is applied the ring buffer is
observed as full (128 requests were consumed at once) in 60% of calls.
After patch is applied the distribution of number of completed requests
is "smoother" and the queue (requests in-flight) is almost never full.
The fio read results are the following (write results are almost the
same and are not showed here):
Before
------
job: (groupid=0, jobs=8): err= 0: pid=2227: Tue Jul 19 11:29:50 2016
Description : [Emulation of Storage Server Access Pattern]
read : io=54681MB, bw=1822.7MB/s, iops=179779, runt= 30001msec
slat (usec): min=172, max=16883, avg=338.35, stdev=109.66
clat (usec): min=1, max=21977, avg=1051.45, stdev=299.29
lat (usec): min=317, max=22521, avg=1389.83, stdev=300.73
clat percentiles (usec):
| 1.00th=[ 346], 5.00th=[ 596], 10.00th=[ 708], 20.00th=[ 852],
| 30.00th=[ 932], 40.00th=[ 996], 50.00th=[ 1048], 60.00th=[ 1112],
| 70.00th=[ 1176], 80.00th=[ 1256], 90.00th=[ 1384], 95.00th=[ 1496],
| 99.00th=[ 1800], 99.50th=[ 1928], 99.90th=[ 2320], 99.95th=[ 2672],
| 99.99th=[ 4704]
bw (KB /s): min=205229, max=553181, per=12.50%, avg=233278.26, stdev=18383.51
After
------
job: (groupid=0, jobs=8): err= 0: pid=2220: Tue Jul 19 11:31:51 2016
Description : [Emulation of Storage Server Access Pattern]
read : io=57637MB, bw=1921.2MB/s, iops=189529, runt= 30002msec
slat (usec): min=169, max=20636, avg=329.61, stdev=124.18
clat (usec): min=2, max=19592, avg=988.78, stdev=251.04
lat (usec): min=381, max=21067, avg=1318.42, stdev=243.58
clat percentiles (usec):
| 1.00th=[ 310], 5.00th=[ 580], 10.00th=[ 748], 20.00th=[ 876],
| 30.00th=[ 908], 40.00th=[ 948], 50.00th=[ 1012], 60.00th=[ 1064],
| 70.00th=[ 1080], 80.00th=[ 1128], 90.00th=[ 1224], 95.00th=[ 1288],
| 99.00th=[ 1496], 99.50th=[ 1608], 99.90th=[ 1960], 99.95th=[ 2256],
| 99.99th=[ 5408]
bw (KB /s): min=212149, max=390160, per=12.49%, avg=245746.04, stdev=11606.75
Throughput increased from 1822MB/s to 1921MB/s, average completion latencies
decreased from 1051us to 988us.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Message-id: 1468931263-32667-4-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Section "7.1.4 Use of library functions" in the C99 standard says:
If an argument to a function has an invalid value (such as [...]
a null pointer [...]) [...] the behavior is undefined.
Additionally the "searching and sorting" functions are specified as
requiring valid pointer values as described in 7.1.4.
This patch fixes the following sanitizer errors:
block/qcow2.c:1807:41: runtime error: null pointer passed as argument 2, which is declared to never be null
block/qcow2-cluster.c:86:26: runtime error: null pointer passed as argument 2, which is declared to never be null
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1473758138-19260-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The companion descriptor is present on all usb3 devices, not only
those with streams support. We need to check attributes to see
whenever the device uses streams or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1473406890-30164-1-git-send-email-kraxel@redhat.com
Previously the code would incorrectly report the remainder as 8 bytes. A
remainder of 0 bytes should be reported when the SETUP packet is
successfully transferred. Found using FreeBSD's XHCI driver.
Signed-off-by: Hans Petter Selasky <hps@selasky.org>
[ kraxel: codestyle fixup ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently all the libgfapi logs defaults to '/dev/stderr' as it was hardcoded
in a call to glfs logging api. When the debug level is chosen to DEBUG/TRACE,
gfapi logs will be huge and fill/overflow the console view.
This patch provides a commandline option to mention log file path which helps
in logging to the specified file and also help in persisting the gfapi logs.
Usage:
-----
*URI Style:
---------
-drive file=gluster://hostname/volname/image.qcow2,file.debug=9,\
file.logfile=/var/log/qemu/qemu-gfapi.log
*JSON Style:
----------
'json:{
"driver":"qcow2",
"file":{
"driver":"gluster",
"volume":"volname",
"path":"image.qcow2",
"debug":"9",
"logfile":"/var/log/qemu/qemu-gfapi.log",
"server":[
{
"type":"tcp",
"host":"1.2.3.4",
"port":24007
},
{
"type":"unix",
"socket":"/var/run/glusterd.socket"
}
]
}
}'
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-09-13 01:34:47 -04:00
738 changed files with 25189 additions and 12938 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
