hda-audio: fix non-mixer codecs

They don't advertise mixer support, but still allow the guest change
mixer settings.  Add a check to avoid it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

.gitignore

@@ -18,8 +18,8 @@
 /*-darwin-user
 /*-linux-user
 /*-bsd-user
-libdis*
+/libdis*
-libuser
+/libuser
 /linux-headers/asm
 /qga/qapi-generated
 /qapi-generated
@@ -49,19 +49,9 @@ libuser
 /qemu-monitor.texi
 /qmp-commands.txt
 /vscclient
-/test-bitops
-/test-coroutine
-/test-int128
-/test-opts-visitor
-/test-qmp-input-visitor
-/test-qmp-output-visitor
-/test-string-input-visitor
-/test-string-output-visitor
-/test-visitor-serialization
 /fsdev/virtfs-proxy-helper
 /fsdev/virtfs-proxy-helper.1
 /fsdev/virtfs-proxy-helper.pod
-/.gdbinit
 *.a
 *.aux
 *.cp
@@ -90,12 +80,8 @@ libuser
 *.pc
 .libs
 .sdk
-*.swp
-*.orig
-.pc
 *.gcda
 *.gcno
-patches
 /pc-bios/bios-pq/status
 /pc-bios/vgabios-pq/status
 /pc-bios/optionrom/linuxboot.asm

MAINTAINERS

@@ -674,6 +674,8 @@ S: Supported
 F: block*
 F: block/
 F: hw/block/
+F: qemu-img*
+F: qemu-io*
 T: git git://repo.or.cz/qemu/kevin.git block
 T: git git://github.com/stefanha/qemu.git block
 

VERSION

@@ -1 +1 @@
-1.7.92
+2.0.50

block-migration.c

@@ -310,13 +310,28 @@ static int mig_save_device_bulk(QEMUFile *f, BlkMigDevState *bmds)
 
 /* Called with iothread lock taken.  */
 
-static void set_dirty_tracking(void)
+static int set_dirty_tracking(void)
 {
     BlkMigDevState *bmds;
+    int ret;
 
     QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
-        bmds->dirty_bitmap = bdrv_create_dirty_bitmap(bmds->bs, BLOCK_SIZE);
+        bmds->dirty_bitmap = bdrv_create_dirty_bitmap(bmds->bs, BLOCK_SIZE,
+                                                      NULL);
+        if (!bmds->dirty_bitmap) {
+            ret = -errno;
+            goto fail;
         }
+    }
+    return 0;
+
+fail:
+    QSIMPLEQ_FOREACH(bmds, &block_mig_state.bmds_list, entry) {
+        if (bmds->dirty_bitmap) {
+            bdrv_release_dirty_bitmap(bmds->bs, bmds->dirty_bitmap);
+        }
+    }
+    return ret;
 }
 
 static void unset_dirty_tracking(void)
@@ -611,10 +626,17 @@ static int block_save_setup(QEMUFile *f, void *opaque)
             block_mig_state.submitted, block_mig_state.transferred);
 
     qemu_mutex_lock_iothread();
-    init_blk_migration(f);
 
     /* start track dirty blocks */
-    set_dirty_tracking();
+    ret = set_dirty_tracking();
+
+    if (ret) {
+        qemu_mutex_unlock_iothread();
+        return ret;
+    }
+
+    init_blk_migration(f);
+
     qemu_mutex_unlock_iothread();
 
     ret = flush_blks(f);

block.c

@@ -332,10 +332,21 @@ void bdrv_register(BlockDriver *bdrv)
 }
 
 /* create a new block device (by default it is empty) */
-BlockDriverState *bdrv_new(const char *device_name)
+BlockDriverState *bdrv_new(const char *device_name, Error **errp)
 {
     BlockDriverState *bs;
 
+    if (bdrv_find(device_name)) {
+        error_setg(errp, "Device with id '%s' already exists",
+                   device_name);
+        return NULL;
+    }
+    if (bdrv_find_node(device_name)) {
+        error_setg(errp, "Device with node-name '%s' already exists",
+                   device_name);
+        return NULL;
+    }
+
     bs = g_malloc0(sizeof(BlockDriverState));
     QLIST_INIT(&bs->dirty_bitmaps);
     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
@@ -788,38 +799,36 @@ static int bdrv_open_flags(BlockDriverState *bs, int flags)
     return open_flags;
 }
 
-static int bdrv_assign_node_name(BlockDriverState *bs,
+static void bdrv_assign_node_name(BlockDriverState *bs,
                                   const char *node_name,
                                   Error **errp)
 {
     if (!node_name) {
-        return 0;
+        return;
     }
 
     /* empty string node name is invalid */
     if (node_name[0] == '\0') {
         error_setg(errp, "Empty node name");
-        return -EINVAL;
+        return;
     }
 
     /* takes care of avoiding namespaces collisions */
     if (bdrv_find(node_name)) {
         error_setg(errp, "node-name=%s is conflicting with a device id",
                    node_name);
-        return -EINVAL;
+        return;
     }
 
     /* takes care of avoiding duplicates node names */
     if (bdrv_find_node(node_name)) {
         error_setg(errp, "Duplicate node name");
-        return -EINVAL;
+        return;
     }
 
     /* copy node name into the bs and insert it into the graph list */
     pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
     QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
-
-    return 0;
 }
 
 /*
@@ -854,9 +863,10 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
 
     node_name = qdict_get_try_str(options, "node-name");
-    ret = bdrv_assign_node_name(bs, node_name, errp);
+    bdrv_assign_node_name(bs, node_name, &local_err);
-    if (ret < 0) {
+    if (local_err) {
-        return ret;
+        error_propagate(errp, local_err);
+        return -EINVAL;
     }
     qdict_del(options, "node-name");
 
@@ -1058,14 +1068,14 @@ fail:
  */
 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
 {
-    char backing_filename[PATH_MAX];
+    char *backing_filename = g_malloc0(PATH_MAX);
-    int back_flags, ret;
+    int back_flags, ret = 0;
     BlockDriver *back_drv = NULL;
     Error *local_err = NULL;
 
     if (bs->backing_hd != NULL) {
         QDECREF(options);
-        return 0;
+        goto free_exit;
     }
 
     /* NULL means an empty set of options */
@@ -1078,10 +1088,9 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
         backing_filename[0] = '\0';
     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
         QDECREF(options);
-        return 0;
+        goto free_exit;
     } else {
-        bdrv_get_full_backing_filename(bs, backing_filename,
+        bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
-                                       sizeof(backing_filename));
     }
 
     if (bs->backing_format[0] != '\0') {
@@ -1102,7 +1111,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
         error_setg(errp, "Could not open backing file: %s",
                    error_get_pretty(local_err));
         error_free(local_err);
-        return ret;
+        goto free_exit;
     }
 
     if (bs->backing_hd->file) {
@@ -1113,7 +1122,9 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
     /* Recalculate the BlockLimits with the backing file */
     bdrv_refresh_limits(bs);
 
-    return 0;
+free_exit:
+    g_free(backing_filename);
+    return ret;
 }
 
 /*
@@ -1170,8 +1181,7 @@ done:
 void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
 {
     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
-    char tmp_filename[PATH_MAX + 1];
+    char *tmp_filename = g_malloc0(PATH_MAX + 1);
-
     int64_t total_size;
     BlockDriver *bdrv_qcow2;
     QEMUOptionParameter *create_options;
@@ -1187,15 +1197,15 @@ void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
     total_size = bdrv_getlength(bs);
     if (total_size < 0) {
         error_setg_errno(errp, -total_size, "Could not get image size");
-        return;
+        goto out;
     }
     total_size &= BDRV_SECTOR_MASK;
 
     /* Create the temporary image */
-    ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
+    ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
     if (ret < 0) {
         error_setg_errno(errp, -ret, "Could not get temporary filename");
-        return;
+        goto out;
     }
 
     bdrv_qcow2 = bdrv_find_format("qcow2");
@@ -1211,7 +1221,7 @@ void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
                          "'%s': %s", tmp_filename,
                          error_get_pretty(local_err));
         error_free(local_err);
-        return;
+        goto out;
     }
 
     /* Prepare a new options QDict for the temporary file */
@@ -1221,17 +1231,20 @@ void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
     qdict_put(snapshot_options, "file.filename",
               qstring_from_str(tmp_filename));
 
-    bs_snapshot = bdrv_new("");
+    bs_snapshot = bdrv_new("", &error_abort);
     bs_snapshot->is_temporary = 1;
 
     ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
                     bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
     if (ret < 0) {
         error_propagate(errp, local_err);
-        return;
+        goto out;
     }
 
     bdrv_append(bs_snapshot, bs);
+
+out:
+    g_free(tmp_filename);
 }
 
 /*
@@ -1288,7 +1301,7 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
     if (*pbs) {
         bs = *pbs;
     } else {
-        bs = bdrv_new("");
+        bs = bdrv_new("", &error_abort);
     }
 
     /* NULL means an empty set of options */
@@ -2581,6 +2594,10 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
 {
     int64_t len;
 
+    if (size > INT_MAX) {
+        return -EIO;
+    }
+
     if (!bdrv_is_inserted(bs))
         return -ENOMEDIUM;
 
@@ -2601,7 +2618,7 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
                               int nb_sectors)
 {
-    if (nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+    if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
         return -EIO;
     }
 
@@ -2686,6 +2703,10 @@ static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
     };
 
+    if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+        return -EINVAL;
+    }
+
     qemu_iovec_init_external(&qiov, &iov, 1);
     return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
                         &qiov, is_write, flags);
@@ -2741,10 +2762,16 @@ int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
  */
 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
 {
-    int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
+    int64_t target_size;
     int64_t ret, nb_sectors, sector_num = 0;
     int n;
 
+    target_size = bdrv_getlength(bs);
+    if (target_size < 0) {
+        return target_size;
+    }
+    target_size /= BDRV_SECTOR_SIZE;
+
     for (;;) {
         nb_sectors = target_size - sector_num;
         if (nb_sectors <= 0) {
@@ -5096,7 +5123,8 @@ bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
     return true;
 }
 
-BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
+BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
+                                          Error **errp)
 {
     int64_t bitmap_size;
     BdrvDirtyBitmap *bitmap;
@@ -5105,7 +5133,13 @@ BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
 
     granularity >>= BDRV_SECTOR_BITS;
     assert(granularity);
-    bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
+    bitmap_size = bdrv_getlength(bs);
+    if (bitmap_size < 0) {
+        error_setg_errno(errp, -bitmap_size, "could not get length of device");
+        errno = -bitmap_size;
+        return NULL;
+    }
+    bitmap_size >>= BDRV_SECTOR_BITS;
     bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
     bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
     QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);

block/bochs.c

@@ -148,16 +148,26 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
     s->extent_blocks = 1 + (le32_to_cpu(bochs.extent) - 1) / 512;
 
     s->extent_size = le32_to_cpu(bochs.extent);
-    if (s->extent_size == 0) {
+    if (s->extent_size < BDRV_SECTOR_SIZE) {
-        error_setg(errp, "Extent size may not be zero");
+        /* bximage actually never creates extents smaller than 4k */
-        return -EINVAL;
+        error_setg(errp, "Extent size must be at least 512");
+        ret = -EINVAL;
+        goto fail;
+    } else if (!is_power_of_2(s->extent_size)) {
+        error_setg(errp, "Extent size %" PRIu32 " is not a power of two",
+                   s->extent_size);
+        ret = -EINVAL;
+        goto fail;
     } else if (s->extent_size > 0x800000) {
         error_setg(errp, "Extent size %" PRIu32 " is too large",
                    s->extent_size);
-        return -EINVAL;
+        ret = -EINVAL;
+        goto fail;
     }
 
-    if (s->catalog_size < bs->total_sectors / s->extent_size) {
+    if (s->catalog_size < DIV_ROUND_UP(bs->total_sectors,
+                                       s->extent_size / BDRV_SECTOR_SIZE))
+    {
         error_setg(errp, "Catalog size is too small for this disk size");
         ret = -EINVAL;
         goto fail;

block/cloop.c

@@ -72,7 +72,7 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
     }
     s->block_size = be32_to_cpu(s->block_size);
     if (s->block_size % 512) {
-        error_setg(errp, "block_size %u must be a multiple of 512",
+        error_setg(errp, "block_size %" PRIu32 " must be a multiple of 512",
                    s->block_size);
         return -EINVAL;
     }
@@ -86,7 +86,7 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
      * need a buffer this big.
      */
     if (s->block_size > MAX_BLOCK_SIZE) {
-        error_setg(errp, "block_size %u must be %u MB or less",
+        error_setg(errp, "block_size %" PRIu32 " must be %u MB or less",
                    s->block_size,
                    MAX_BLOCK_SIZE / (1024 * 1024));
         return -EINVAL;
@@ -101,7 +101,7 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
     /* read offsets */
     if (s->n_blocks > (UINT32_MAX - 1) / sizeof(uint64_t)) {
         /* Prevent integer overflow */
-        error_setg(errp, "n_blocks %u must be %zu or less",
+        error_setg(errp, "n_blocks %" PRIu32 " must be %zu or less",
                    s->n_blocks,
                    (UINT32_MAX - 1) / sizeof(uint64_t));
         return -EINVAL;
@@ -133,7 +133,7 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
 
         if (s->offsets[i] < s->offsets[i - 1]) {
             error_setg(errp, "offsets not monotonically increasing at "
-                       "index %u, image file is corrupt", i);
+                       "index %" PRIu32 ", image file is corrupt", i);
             ret = -EINVAL;
             goto fail;
         }
@@ -146,8 +146,8 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
          * ridiculous s->compressed_block allocation.
          */
         if (size > 2 * MAX_BLOCK_SIZE) {
-            error_setg(errp, "invalid compressed block size at index %u, "
+            error_setg(errp, "invalid compressed block size at index %" PRIu32
-                       "image file is corrupt", i);
+                       ", image file is corrupt", i);
             ret = -EINVAL;
             goto fail;
         }

block/commit.c

@@ -194,7 +194,7 @@ void commit_start(BlockDriverState *bs, BlockDriverState *base,
     if ((on_error == BLOCKDEV_ON_ERROR_STOP ||
          on_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
         !bdrv_iostatus_is_enabled(bs)) {
-        error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
+        error_setg(errp, "Invalid parameter combination");
         return;
     }
 

block/curl.c

@@ -543,7 +543,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
     return 0;
 
 out:
-    fprintf(stderr, "CURL: Error opening file: %s\n", state->errmsg);
+    error_setg(errp, "CURL: Error opening file: %s", state->errmsg);
     curl_easy_cleanup(state->curl);
     state->curl = NULL;
 out_noclean:

block/iscsi.c

@@ -1095,16 +1095,15 @@ static struct scsi_task *iscsi_do_inquiry(struct iscsi_context *iscsi, int lun,
     *inq = scsi_datain_unmarshall(task);
     if (*inq == NULL) {
         error_setg(errp, "iSCSI: failed to unmarshall inquiry datain blob");
-        goto fail;
+        goto fail_with_err;
     }
 
     return task;
 
 fail:
-    if (!error_is_set(errp)) {
     error_setg(errp, "iSCSI: Inquiry command failed : %s",
                iscsi_get_error(iscsi));
-    }
+fail_with_err:
     if (task != NULL) {
         scsi_free_scsi_task(task);
     }
@@ -1233,6 +1232,7 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
     iscsi_readcapacity_sync(iscsilun, &local_err);
     if (local_err != NULL) {
         error_propagate(errp, local_err);
+        ret = -EINVAL;
         goto out;
     }
     bs->total_sectors = sector_lun2qemu(iscsilun->num_blocks, iscsilun);
@@ -1400,7 +1400,7 @@ static int iscsi_create(const char *filename, QEMUOptionParameter *options,
     IscsiLun *iscsilun = NULL;
     QDict *bs_options;
 
-    bs = bdrv_new("");
+    bs = bdrv_new("", &error_abort);
 
     /* Read out options */
     while (options && options->name) {

block/mirror.c

@@ -605,7 +605,10 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
     s->granularity = granularity;
     s->buf_size = MAX(buf_size, granularity);
 
-    s->dirty_bitmap = bdrv_create_dirty_bitmap(bs, granularity);
+    s->dirty_bitmap = bdrv_create_dirty_bitmap(bs, granularity, errp);
+    if (!s->dirty_bitmap) {
+        return;
+    }
     bdrv_set_enable_write_cache(s->target, true);
     bdrv_set_on_error(s->target, on_target_error, on_target_error);
     bdrv_iostatus_enable(s->target);
@@ -677,7 +680,7 @@ void commit_active_start(BlockDriverState *bs, BlockDriverState *base,
     mirror_start_job(bs, base, speed, 0, 0,
                      on_error, on_error, cb, opaque, &local_err,
                      &commit_active_job_driver, false, base);
-    if (error_is_set(&local_err)) {
+    if (local_err) {
         error_propagate(errp, local_err);
         goto error_restore_flags;
     }

block/nbd.c

@@ -175,7 +175,7 @@ static void nbd_parse_filename(const char *filename, QDict *options,
         InetSocketAddress *addr = NULL;
 
         addr = inet_parse(host_spec, errp);
-        if (error_is_set(errp)) {
+        if (!addr) {
             goto out;
         }
 

block/nfs.c

@@ -343,7 +343,7 @@ static int nfs_file_open(BlockDriverState *bs, QDict *options, int flags,
 
     opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
     qemu_opts_absorb_qdict(opts, options, &local_err);
-    if (error_is_set(&local_err)) {
+    if (local_err) {
         error_propagate(errp, local_err);
         return -EINVAL;
     }

block/qed.c

@@ -650,18 +650,20 @@ static int bdrv_qed_create(const char *filename, QEMUOptionParameter *options,
     }
 
     if (!qed_is_cluster_size_valid(cluster_size)) {
-        fprintf(stderr, "QED cluster size must be within range [%u, %u] and power of 2\n",
+        error_setg(errp, "QED cluster size must be within range [%u, %u] "
+                         "and power of 2",
                    QED_MIN_CLUSTER_SIZE, QED_MAX_CLUSTER_SIZE);
         return -EINVAL;
     }
     if (!qed_is_table_size_valid(table_size)) {
-        fprintf(stderr, "QED table size must be within range [%u, %u] and power of 2\n",
+        error_setg(errp, "QED table size must be within range [%u, %u] "
+                         "and power of 2",
                    QED_MIN_TABLE_SIZE, QED_MAX_TABLE_SIZE);
         return -EINVAL;
     }
     if (!qed_is_image_size_valid(image_size, cluster_size, table_size)) {
-        fprintf(stderr, "QED image size must be a non-zero multiple of "
+        error_setg(errp, "QED image size must be a non-zero multiple of "
-                        "cluster size and less than %" PRIu64 " bytes\n",
+                         "cluster size and less than %" PRIu64 " bytes",
                    qed_max_image_size(cluster_size, table_size));
         return -EINVAL;
     }

block/quorum.c

@@ -753,7 +753,7 @@ static int quorum_open(BlockDriverState *bs, QDict *options, int flags,
 
     opts = qemu_opts_create(&quorum_runtime_opts, NULL, 0, &error_abort);
     qemu_opts_absorb_qdict(opts, options, &local_err);
-    if (error_is_set(&local_err)) {
+    if (local_err) {
         ret = -EINVAL;
         goto exit;
     }
@@ -828,7 +828,7 @@ close_exit:
     g_free(opened);
 exit:
     /* propagate error */
-    if (error_is_set(&local_err)) {
+    if (local_err) {
         error_propagate(errp, local_err);
     }
     QDECREF(list);

block/vmdk.c

@@ -262,7 +262,7 @@ static uint32_t vmdk_read_cid(BlockDriverState *bs, int parent)
     p_name = strstr(desc, cid_str);
     if (p_name != NULL) {
         p_name += cid_str_size;
-        sscanf(p_name, "%x", &cid);
+        sscanf(p_name, "%" SCNx32, &cid);
     }
 
     return cid;
@@ -290,7 +290,7 @@ static int vmdk_write_cid(BlockDriverState *bs, uint32_t cid)
     p_name = strstr(desc, "CID");
     if (p_name != NULL) {
         p_name += sizeof("CID");
-        snprintf(p_name, sizeof(desc) - (p_name - desc), "%x\n", cid);
+        snprintf(p_name, sizeof(desc) - (p_name - desc), "%" PRIx32 "\n", cid);
         pstrcat(desc, sizeof(desc), tmp_desc);
     }
 
@@ -640,7 +640,7 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
 
     if (le32_to_cpu(header.version) > 3) {
         char buf[64];
-        snprintf(buf, sizeof(buf), "VMDK version %d",
+        snprintf(buf, sizeof(buf), "VMDK version %" PRId32,
                  le32_to_cpu(header.version));
         error_set(errp, QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
                   bs->device_name, "vmdk", buf);
@@ -671,8 +671,9 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
     }
     if (bdrv_getlength(file) <
             le64_to_cpu(header.grain_offset) * BDRV_SECTOR_SIZE) {
-        error_setg(errp, "File truncated, expecting at least %lld bytes",
+        error_setg(errp, "File truncated, expecting at least %" PRId64 " bytes",
-                   le64_to_cpu(header.grain_offset) * BDRV_SECTOR_SIZE);
+                   (int64_t)(le64_to_cpu(header.grain_offset)
+                             * BDRV_SECTOR_SIZE));
         return -EINVAL;
     }
 
@@ -1707,8 +1708,8 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options,
     const char desc_template[] =
         "# Disk DescriptorFile\n"
         "version=1\n"
-        "CID=%x\n"
+        "CID=%" PRIx32 "\n"
-        "parentCID=%x\n"
+        "parentCID=%" PRIx32 "\n"
         "createType=\"%s\"\n"
         "%s"
         "\n"
@@ -1720,7 +1721,7 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options,
         "\n"
         "ddb.virtualHWVersion = \"%d\"\n"
         "ddb.geometry.cylinders = \"%" PRId64 "\"\n"
-        "ddb.geometry.heads = \"%d\"\n"
+        "ddb.geometry.heads = \"%" PRIu32 "\"\n"
         "ddb.geometry.sectors = \"63\"\n"
         "ddb.adapterType = \"%s\"\n";
 
@@ -1780,9 +1781,9 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options,
              strcmp(fmt, "twoGbMaxExtentFlat"));
     compress = !strcmp(fmt, "streamOptimized");
     if (flat) {
-        desc_extent_line = "RW %lld FLAT \"%s\" 0\n";
+        desc_extent_line = "RW %" PRId64 " FLAT \"%s\" 0\n";
     } else {
-        desc_extent_line = "RW %lld SPARSE \"%s\"\n";
+        desc_extent_line = "RW %" PRId64 " SPARSE \"%s\"\n";
     }
     if (flat && backing_file) {
         error_setg(errp, "Flat image can't have backing file");
@@ -1850,7 +1851,7 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options,
     }
     /* generate descriptor file */
     desc = g_strdup_printf(desc_template,
-                           (unsigned int)time(NULL),
+                           (uint32_t)time(NULL),
                            parent_cid,
                            fmt,
                            parent_desc_line,

block/vvfat.c

@@ -2947,7 +2947,7 @@ static int enable_write_target(BDRVVVFATState *s)
     unlink(s->qcow_filename);
 #endif
 
-    s->bs->backing_hd = bdrv_new("");
+    s->bs->backing_hd = bdrv_new("", &error_abort);
     s->bs->backing_hd->drv = &vvfat_write_target;
     s->bs->backing_hd->opaque = g_malloc(sizeof(void*));
     *(void**)s->bs->backing_hd->opaque = s;

blockdev.c

@@ -452,16 +452,14 @@ static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
         }
     }
 
-    if (bdrv_find_node(qemu_opts_id(opts))) {
-        error_setg(errp, "device id=%s is conflicting with a node-name",
-                   qemu_opts_id(opts));
-        goto early_err;
-    }
-
     /* init */
     dinfo = g_malloc0(sizeof(*dinfo));
     dinfo->id = g_strdup(qemu_opts_id(opts));
-    dinfo->bdrv = bdrv_new(dinfo->id);
+    dinfo->bdrv = bdrv_new(dinfo->id, &error);
+    if (error) {
+        error_propagate(errp, error);
+        goto bdrv_new_err;
+    }
     dinfo->bdrv->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
     dinfo->bdrv->read_only = ro;
     dinfo->refcount = 1;
@@ -523,8 +521,9 @@ static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
 
 err:
     bdrv_unref(dinfo->bdrv);
-    g_free(dinfo->id);
     QTAILQ_REMOVE(&drives, dinfo, next);
+bdrv_new_err:
+    g_free(dinfo->id);
     g_free(dinfo);
 early_err:
     QDECREF(bs_opts);
@@ -1116,6 +1115,7 @@ typedef struct InternalSnapshotState {
 static void internal_snapshot_prepare(BlkTransactionState *common,
                                       Error **errp)
 {
+    Error *local_err = NULL;
     const char *device;
     const char *name;
     BlockDriverState *bs;
@@ -1164,8 +1164,10 @@ static void internal_snapshot_prepare(BlkTransactionState *common,
     }
 
     /* check whether a snapshot with name exist */
-    ret = bdrv_snapshot_find_by_id_and_name(bs, NULL, name, &old_sn, errp);
+    ret = bdrv_snapshot_find_by_id_and_name(bs, NULL, name, &old_sn,
-    if (error_is_set(errp)) {
+                                            &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
         return;
     } else if (ret) {
         error_setg(errp,
@@ -1521,14 +1523,16 @@ static void eject_device(BlockDriverState *bs, int force, Error **errp)
         return;
     }
     if (!bdrv_dev_has_removable_media(bs)) {
-        error_set(errp, QERR_DEVICE_NOT_REMOVABLE, bdrv_get_device_name(bs));
+        error_setg(errp, "Device '%s' is not removable",
+                   bdrv_get_device_name(bs));
         return;
     }
 
     if (bdrv_dev_is_medium_locked(bs) && !bdrv_dev_is_tray_open(bs)) {
         bdrv_dev_eject_request(bs, force);
         if (!force) {
-            error_set(errp, QERR_DEVICE_LOCKED, bdrv_get_device_name(bs));
+            error_setg(errp, "Device '%s' is locked",
+                       bdrv_get_device_name(bs));
             return;
         }
     }
@@ -1876,6 +1880,10 @@ void qmp_block_commit(const char *device,
      */
     BlockdevOnError on_error = BLOCKDEV_ON_ERROR_REPORT;
 
+    if (!has_speed) {
+        speed = 0;
+    }
+
     /* drain all i/o before commits */
     bdrv_drain_all();
 
@@ -2216,7 +2224,8 @@ void qmp_block_job_cancel(const char *device,
         return;
     }
     if (job->paused && !force) {
-        error_set(errp, QERR_BLOCK_JOB_PAUSED, device);
+        error_setg(errp, "The block job for device '%s' is currently paused",
+                   device);
         return;
     }
 

blockjob.c

@@ -88,7 +88,7 @@ void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
     Error *local_err = NULL;
 
     if (!job->driver->set_speed) {
-        error_set(errp, QERR_NOT_SUPPORTED);
+        error_set(errp, QERR_UNSUPPORTED);
         return;
     }
     job->driver->set_speed(job, speed, &local_err);

configure

@@ -1087,7 +1087,10 @@ for opt do
   ;;
   --enable-quorum) quorum="yes"
   ;;
-  *) echo "ERROR: unknown option $opt"; show_help="yes"
+  *)
+      echo "ERROR: unknown option $opt"
+      echo "Try '$0 --help' for more information"
+      exit 1
   ;;
   esac
 done
@@ -1353,7 +1356,7 @@ Advanced options (experts only):
 
 NOTE: The object files are built at the place where configure is launched
 EOF
-exit 1
+exit 0
 fi
 
 # Now we have handled --enable-tcg-interpreter and know we're not just
@@ -1448,7 +1451,10 @@ done
 if test "$stack_protector" != "no" ; then
   gcc_flags="-fstack-protector-strong -fstack-protector-all"
   for flag in $gcc_flags; do
-    if compile_prog "-Werror $flag" "" ; then
+    # We need to check both a compile and a link, since some compiler
+    # setups fail only on a .c->.o compile and some only at link time
+    if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
+       compile_prog "-Werror $flag" ""; then
       QEMU_CFLAGS="$QEMU_CFLAGS $flag"
       LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,$flag"
       break
@@ -4092,7 +4098,6 @@ echo "sparse enabled    $sparse"
 echo "strip binaries    $strip_opt"
 echo "profiler          $profiler"
 echo "static build      $static"
-echo "-Werror enabled   $werror"
 if test "$darwin" = "yes" ; then
     echo "Cocoa support     $cocoa"
 fi

cpus.c

@@ -1454,7 +1454,7 @@ void qmp_pmemsave(int64_t addr, int64_t size, const char *filename,
         l = sizeof(buf);
         if (l > size)
             l = size;
-        cpu_physical_memory_rw(addr, buf, l, 0);
+        cpu_physical_memory_read(addr, buf, l);
         if (fwrite(buf, 1, l, f) != l) {
             error_set(errp, QERR_IO_ERROR);
             goto exit;

default-configs/usb.mak

@@ -1,6 +1,7 @@
 CONFIG_USB_TABLET_WACOM=y
 CONFIG_USB_STORAGE_BOT=y
 CONFIG_USB_STORAGE_UAS=y
+CONFIG_USB_STORAGE_MTP=y
 CONFIG_USB_SMARTCARD=y
 CONFIG_USB_AUDIO=y
 CONFIG_USB_SERIAL=y

docs/writing-qmp-commands.txt

@@ -311,7 +311,7 @@ void hmp_hello_world(Monitor *mon, const QDict *qdict)
     Error *errp = NULL;
 
     qmp_hello_world(!!message, message, &errp);
-    if (error_is_set(&errp)) {
+    if (errp) {
         monitor_printf(mon, "%s\n", error_get_pretty(errp));
         error_free(errp);
         return;
@@ -483,7 +483,7 @@ void hmp_info_alarm_clock(Monitor *mon)
     Error *errp = NULL;
 
     clock = qmp_query_alarm_clock(&errp);
-    if (error_is_set(&errp)) {
+    if (errp) {
         monitor_printf(mon, "Could not query alarm clock information\n");
         error_free(errp);
         return;
@@ -634,7 +634,7 @@ void hmp_info_alarm_methods(Monitor *mon)
     Error *errp = NULL;
 
     method_list = qmp_query_alarm_methods(&errp);
-    if (error_is_set(&errp)) {
+    if (errp) {
         monitor_printf(mon, "Could not query alarm methods\n");
         error_free(errp);
         return;

fsdev/virtfs-proxy-helper.c

@@ -760,6 +760,7 @@ static int proxy_socket(const char *path, uid_t uid, gid_t gid)
         return -1;
     }
 
+    size = sizeof(qemu);
     client = accept(sock, (struct sockaddr *)&qemu, &size);
     if (client < 0) {
         do_perror("accept");

hmp-commands.hx

@@ -176,7 +176,7 @@ ETEXI
 
     {
         .name       = "drive_del",
-        .args_type  = "id:s",
+        .args_type  = "id:B",
         .params     = "device",
         .help       = "remove host block device",
         .user_print = monitor_user_noop,
@@ -658,6 +658,7 @@ ETEXI
         .help       = "add device, like -device on the command line",
         .user_print = monitor_user_noop,
         .mhandler.cmd_new = do_device_add,
+        .command_completion = device_add_completion,
     },
 
 STEXI
@@ -673,6 +674,7 @@ ETEXI
         .params     = "device",
         .help       = "remove device",
         .mhandler.cmd = hmp_device_del,
+        .command_completion = device_del_completion,
     },
 
 STEXI
@@ -998,26 +1000,34 @@ ETEXI
 
     {
         .name       = "dump-guest-memory",
-        .args_type  = "paging:-p,filename:F,begin:i?,length:i?",
+        .args_type  = "paging:-p,zlib:-z,lzo:-l,snappy:-s,filename:F,begin:i?,length:i?",
-        .params     = "[-p] filename [begin] [length]",
+        .params     = "[-p] [-z|-l|-s] filename [begin length]",
-        .help       = "dump guest memory to file"
+        .help       = "dump guest memory into file 'filename'.\n\t\t\t"
-                      "\n\t\t\t begin(optional): the starting physical address"
+                      "-p: do paging to get guest's memory mapping.\n\t\t\t"
-                      "\n\t\t\t length(optional): the memory size, in bytes",
+                      "-z: dump in kdump-compressed format, with zlib compression.\n\t\t\t"
+                      "-l: dump in kdump-compressed format, with lzo compression.\n\t\t\t"
+                      "-s: dump in kdump-compressed format, with snappy compression.\n\t\t\t"
+                      "begin: the starting physical address.\n\t\t\t"
+                      "length: the memory size, in bytes.",
         .mhandler.cmd = hmp_dump_guest_memory,
     },
 
 
 STEXI
-@item dump-guest-memory [-p] @var{protocol} @var{begin} @var{length}
+@item dump-guest-memory [-p] @var{filename} @var{begin} @var{length}
+@item dump-guest-memory [-z|-l|-s] @var{filename}
 @findex dump-guest-memory
 Dump guest memory to @var{protocol}. The file can be processed with crash or
-gdb.
+gdb. Without -z|-l|-s, the dump format is ELF.
-  filename: dump file name
+        -p: do paging to get guest's memory mapping.
-    paging: do paging to get guest's memory mapping
+        -z: dump in kdump-compressed format, with zlib compression.
+        -l: dump in kdump-compressed format, with lzo compression.
+        -s: dump in kdump-compressed format, with snappy compression.
+  filename: dump file name.
      begin: the starting physical address. It's optional, and should be
-            specified with length together.
+            specified together with length.
     length: the memory size, in bytes. It's optional, and should be specified
-            with begin together.
+            together with begin.
 ETEXI
 
     {
@@ -1254,6 +1264,7 @@ ETEXI
         .params     = "[qom-type=]type,id=str[,prop=value][,...]",
         .help       = "create QOM object",
         .mhandler.cmd = hmp_object_add,
+        .command_completion = object_add_completion,
     },
 
 STEXI
@@ -1268,6 +1279,7 @@ ETEXI
         .params     = "id",
         .help       = "destroy QOM object",
         .mhandler.cmd = hmp_object_del,
+        .command_completion = object_del_completion,
     },
 
 STEXI

hmp.c

@@ -1308,16 +1308,35 @@ void hmp_dump_guest_memory(Monitor *mon, const QDict *qdict)
 {
     Error *errp = NULL;
     int paging = qdict_get_try_bool(qdict, "paging", 0);
+    int zlib = qdict_get_try_bool(qdict, "zlib", 0);
+    int lzo = qdict_get_try_bool(qdict, "lzo", 0);
+    int snappy = qdict_get_try_bool(qdict, "snappy", 0);
     const char *file = qdict_get_str(qdict, "filename");
     bool has_begin = qdict_haskey(qdict, "begin");
     bool has_length = qdict_haskey(qdict, "length");
-    /* kdump-compressed format is not supported for HMP */
-    bool has_format = false;
     int64_t begin = 0;
     int64_t length = 0;
     enum DumpGuestMemoryFormat dump_format = DUMP_GUEST_MEMORY_FORMAT_ELF;
     char *prot;
 
+    if (zlib + lzo + snappy > 1) {
+        error_setg(&errp, "only one of '-z|-l|-s' can be set");
+        hmp_handle_error(mon, &errp);
+        return;
+    }
+
+    if (zlib) {
+        dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_ZLIB;
+    }
+
+    if (lzo) {
+        dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_LZO;
+    }
+
+    if (snappy) {
+        dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_SNAPPY;
+    }
+
     if (has_begin) {
         begin = qdict_get_int(qdict, "begin");
     }
@@ -1328,7 +1347,7 @@ void hmp_dump_guest_memory(Monitor *mon, const QDict *qdict)
     prot = g_strconcat("file:", file, NULL);
 
     qmp_dump_guest_memory(paging, prot, has_begin, begin, has_length, length,
-                          has_format, dump_format, &errp);
+                          true, dump_format, &errp);
     hmp_handle_error(mon, &errp);
     g_free(prot);
 }

hmp.h

@@ -15,6 +15,7 @@
 #define HMP_H
 
 #include "qemu-common.h"
+#include "qemu/readline.h"
 #include "qapi-types.h"
 #include "qapi/qmp/qdict.h"
 
@@ -92,5 +93,9 @@ void hmp_qemu_io(Monitor *mon, const QDict *qdict);
 void hmp_cpu_add(Monitor *mon, const QDict *qdict);
 void hmp_object_add(Monitor *mon, const QDict *qdict);
 void hmp_object_del(Monitor *mon, const QDict *qdict);
+void object_add_completion(ReadLineState *rs, int nb_args, const char *str);
+void object_del_completion(ReadLineState *rs, int nb_args, const char *str);
+void device_add_completion(ReadLineState *rs, int nb_args, const char *str);
+void device_del_completion(ReadLineState *rs, int nb_args, const char *str);
 
 #endif

hw/9pfs/virtio-9p.c

@@ -987,7 +987,8 @@ static void v9fs_attach(void *opaque)
      */
     if (!s->migration_blocker) {
         s->root_fid = fid;
-        error_set(&s->migration_blocker, QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION,
+        error_setg(&s->migration_blocker,
+                   "Migration is disabled when VirtFS export path '%s' is mounted in the guest using mount_tag '%s'",
                    s->ctx.fs_root ? s->ctx.fs_root : "NULL", s->tag);
         migrate_add_blocker(s->migration_blocker);
     }

hw/arm/cubieboard.c

@@ -43,6 +43,19 @@ static void cubieboard_init(QEMUMachineInitArgs *args)
         exit(1);
     }
 
+    object_property_set_int(OBJECT(&s->a10->timer), 32768, "clk0-freq", &err);
+    if (err != NULL) {
+        error_report("Couldn't set clk0 frequency: %s", error_get_pretty(err));
+        exit(1);
+    }
+
+    object_property_set_int(OBJECT(&s->a10->timer), 24000000, "clk1-freq",
+                            &err);
+    if (err != NULL) {
+        error_report("Couldn't set clk1 frequency: %s", error_get_pretty(err));
+        exit(1);
+    }
+
     object_property_set_bool(OBJECT(s->a10), true, "realized", &err);
     if (err != NULL) {
         error_report("Couldn't realize Allwinner A10: %s",

hw/audio/hda-codec.c

@@ -261,6 +261,9 @@ static void hda_audio_set_amp(HDAAudioStream *st)
     left = left * 255 / QEMU_HDA_AMP_STEPS;
     right = right * 255 / QEMU_HDA_AMP_STEPS;
 
+    if (!st->state->mixer) {
+        return;
+    }
     if (st->output) {
         AUD_set_volume_out(st->voice.out, muted, left, right);
     } else {

hw/block/xen_disk.c

@@ -817,11 +817,14 @@ static int blk_connect(struct XenDevice *xendev)
     index = (blkdev->xendev.dev - 202 * 256) / 16;
     blkdev->dinfo = drive_get(IF_XEN, 0, index);
     if (!blkdev->dinfo) {
+        Error *local_err = NULL;
         /* setup via xenbus -> create new block driver instance */
         xen_be_printf(&blkdev->xendev, 2, "create new bdrv (xenbus setup)\n");
-        blkdev->bs = bdrv_new(blkdev->dev);
+        blkdev->bs = bdrv_new(blkdev->dev, &local_err);
+        if (local_err) {
+            blkdev->bs = NULL;
+        }
         if (blkdev->bs) {
-            Error *local_err = NULL;
             BlockDriver *drv = bdrv_find_whitelisted_format(blkdev->fileproto,
                                                            readonly);
             if (bdrv_open(&blkdev->bs, blkdev->filename, NULL, NULL, qflags,

hw/core/qdev-properties.c

@@ -587,8 +587,9 @@ static void set_blocksize(Object *obj, Visitor *v, void *opaque,
 
     /* We rely on power-of-2 blocksizes for bitmasks */
     if ((value & (value - 1)) != 0) {
-        error_set(errp, QERR_PROPERTY_VALUE_NOT_POWER_OF_2,
+        error_setg(errp,
-                  dev->id?:"", name, (int64_t)value);
+                  "Property %s.%s doesn't take value '%" PRId64 "', it's not a power of 2",
+                  dev->id ?: "", name, (int64_t)value);
         return;
     }
 
@@ -853,7 +854,7 @@ void error_set_from_qdev_prop_error(Error **errp, int ret, DeviceState *dev,
 {
     switch (ret) {
     case -EEXIST:
-        error_set(errp, QERR_PROPERTY_VALUE_IN_USE,
+        error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use",
                   object_get_typename(OBJECT(dev)), prop->name, value);
         break;
     default:
@@ -862,7 +863,7 @@ void error_set_from_qdev_prop_error(Error **errp, int ret, DeviceState *dev,
                   object_get_typename(OBJECT(dev)), prop->name, value);
         break;
     case -ENOENT:
-        error_set(errp, QERR_PROPERTY_VALUE_NOT_FOUND,
+        error_setg(errp, "Property '%s.%s' can't find value '%s'",
                   object_get_typename(OBJECT(dev)), prop->name, value);
         break;
     case 0:

hw/i2c/smbus_eeprom.c

@@ -71,7 +71,7 @@ static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int l
     printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",
            dev->i2c.address, cmd, buf[0]);
 #endif
-    /* An page write operation is not a valid SMBus command.
+    /* A page write operation is not a valid SMBus command.
        It is a block write without a length byte.  Fortunately we
        get the full block anyway.  */
     /* TODO: Should this set the current location?  */

hw/i386/acpi-build.c

@@ -391,7 +391,7 @@ static void build_append_int(GArray *table, uint32_t value)
         build_append_byte(table, 0x01); /* OneOp */
     } else if (value <= 0xFF) {
         build_append_value(table, value, 1);
-    } else if (value <= 0xFFFFF) {
+    } else if (value <= 0xFFFF) {
         build_append_value(table, value, 2);
     } else {
         build_append_value(table, value, 4);

hw/i386/acpi-dsdt.hex.generated

@@ -3,12 +3,12 @@ static unsigned char AcpiDsdtAmlCode[] = {
 0x53,
 0x44,
 0x54,
-0x85,
+0x80,
 0x11,
 0x0,
 0x0,
 0x1,
-0x8b,
+0x60,
 0x42,
 0x58,
 0x50,
@@ -31,8 +31,8 @@ static unsigned char AcpiDsdtAmlCode[] = {
 0x4e,
 0x54,
 0x4c,
-0x23,
+0x15,
-0x8,
+0x11,
 0x13,
 0x20,
 0x10,
@@ -4010,7 +4010,7 @@ static unsigned char AcpiDsdtAmlCode[] = {
 0x53,
 0x1,
 0x10,
-0x47,
+0x42,
 0x11,
 0x5f,
 0x53,
@@ -4243,7 +4243,7 @@ static unsigned char AcpiDsdtAmlCode[] = {
 0x60,
 0x5b,
 0x82,
-0x2e,
+0x29,
 0x50,
 0x52,
 0x45,
@@ -4253,16 +4253,11 @@ static unsigned char AcpiDsdtAmlCode[] = {
 0x48,
 0x49,
 0x44,
-0xd,
+0xc,
 0x41,
-0x43,
+0xd0,
-0x50,
+0xa,
-0x49,
+0x6,
-0x30,
-0x30,
-0x30,
-0x34,
-0x0,
 0x8,
 0x5f,
 0x43,

hw/i386/kvmvapic.c

@@ -124,14 +124,14 @@ static const TPRInstruction tpr_instr[] = {
 
 static void read_guest_rom_state(VAPICROMState *s)
 {
-    cpu_physical_memory_rw(s->rom_state_paddr, (void *)&s->rom_state,
+    cpu_physical_memory_read(s->rom_state_paddr, &s->rom_state,
-                           sizeof(GuestROMState), 0);
+                             sizeof(GuestROMState));
 }
 
 static void write_guest_rom_state(VAPICROMState *s)
 {
-    cpu_physical_memory_rw(s->rom_state_paddr, (void *)&s->rom_state,
+    cpu_physical_memory_write(s->rom_state_paddr, &s->rom_state,
-                           sizeof(GuestROMState), 1);
+                              sizeof(GuestROMState));
 }
 
 static void update_guest_rom_state(VAPICROMState *s)
@@ -311,16 +311,14 @@ static int update_rom_mapping(VAPICROMState *s, CPUX86State *env, target_ulong i
     for (pos = le32_to_cpu(s->rom_state.fixup_start);
          pos < le32_to_cpu(s->rom_state.fixup_end);
          pos += 4) {
-        cpu_physical_memory_rw(paddr + pos - s->rom_state.vaddr,
+        cpu_physical_memory_read(paddr + pos - s->rom_state.vaddr,
-                               (void *)&offset, sizeof(offset), 0);
+                                 &offset, sizeof(offset));
         offset = le32_to_cpu(offset);
-        cpu_physical_memory_rw(paddr + offset, (void *)&patch,
+        cpu_physical_memory_read(paddr + offset, &patch, sizeof(patch));
-                               sizeof(patch), 0);
         patch = le32_to_cpu(patch);
         patch += rom_state_vaddr - le32_to_cpu(s->rom_state.vaddr);
         patch = cpu_to_le32(patch);
-        cpu_physical_memory_rw(paddr + offset, (void *)&patch,
+        cpu_physical_memory_write(paddr + offset, &patch, sizeof(patch));
-                               sizeof(patch), 1);
     }
     read_guest_rom_state(s);
     s->vapic_paddr = paddr + le32_to_cpu(s->rom_state.vapic_vaddr) -
@@ -364,8 +362,8 @@ static int vapic_enable(VAPICROMState *s, X86CPU *cpu)
     }
     vapic_paddr = s->vapic_paddr +
         (((hwaddr)cpu_number) << VAPIC_CPU_SHIFT);
-    cpu_physical_memory_rw(vapic_paddr + offsetof(VAPICState, enabled),
+    cpu_physical_memory_write(vapic_paddr + offsetof(VAPICState, enabled),
-                           (void *)&enabled, sizeof(enabled), 1);
+                              &enabled, sizeof(enabled));
     apic_enable_vapic(cpu->apic_state, vapic_paddr);
 
     s->state = VAPIC_ACTIVE;
@@ -535,7 +533,7 @@ static int patch_hypercalls(VAPICROMState *s)
     uint8_t *rom;
 
     rom = g_malloc(s->rom_size);
-    cpu_physical_memory_rw(rom_paddr, rom, s->rom_size, 0);
+    cpu_physical_memory_read(rom_paddr, rom, s->rom_size);
 
     for (pos = 0; pos < s->rom_size - sizeof(vmcall_pattern); pos++) {
         if (kvm_irqchip_in_kernel()) {
@@ -551,8 +549,7 @@ static int patch_hypercalls(VAPICROMState *s)
         }
         if (memcmp(rom + pos, pattern, 7) == 0 &&
             (rom[pos + 7] == alternates[0] || rom[pos + 7] == alternates[1])) {
-            cpu_physical_memory_rw(rom_paddr + pos + 5, (uint8_t *)patch,
+            cpu_physical_memory_write(rom_paddr + pos + 5, patch, 3);
-                                   3, 1);
             /*
              * Don't flush the tb here. Under ordinary conditions, the patched
              * calls are miles away from the current IP. Under malicious
@@ -760,8 +757,8 @@ static int vapic_post_load(void *opaque, int version_id)
             run_on_cpu(first_cpu, do_vapic_enable, s);
         } else {
             zero = g_malloc0(s->rom_state.vapic_size);
-            cpu_physical_memory_rw(s->vapic_paddr, zero,
+            cpu_physical_memory_write(s->vapic_paddr, zero,
-                                   s->rom_state.vapic_size, 1);
+                                      s->rom_state.vapic_size);
             g_free(zero);
         }
     }

hw/i386/q35-acpi-dsdt.hex.generated

@@ -3,12 +3,12 @@ static unsigned char Q35AcpiDsdtAmlCode[] = {
 0x53,
 0x44,
 0x54,
-0xd7,
+0xd2,
 0x1c,
 0x0,
 0x0,
 0x1,
-0x3e,
+0x13,
 0x42,
 0x58,
 0x50,
@@ -31,8 +31,8 @@ static unsigned char Q35AcpiDsdtAmlCode[] = {
 0x4e,
 0x54,
 0x4c,
-0x23,
+0x15,
-0x8,
+0x11,
 0x13,
 0x20,
 0x10,
@@ -6959,7 +6959,7 @@ static unsigned char Q35AcpiDsdtAmlCode[] = {
 0x53,
 0x1,
 0x10,
-0x47,
+0x42,
 0x11,
 0x5f,
 0x53,
@@ -7192,7 +7192,7 @@ static unsigned char Q35AcpiDsdtAmlCode[] = {
 0x60,
 0x5b,
 0x82,
-0x2e,
+0x29,
 0x50,
 0x52,
 0x45,
@@ -7202,16 +7202,11 @@ static unsigned char Q35AcpiDsdtAmlCode[] = {
 0x48,
 0x49,
 0x44,
-0xd,
+0xc,
 0x41,
-0x43,
+0xd0,
-0x50,
+0xa,
-0x49,
+0x6,
-0x30,
-0x30,
-0x30,
-0x34,
-0x0,
 0x8,
 0x5f,
 0x43,

hw/ide/ahci.c

@@ -438,9 +438,9 @@ static void check_cmd(AHCIState *s, int port)
 
     if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) {
         for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) {
-            if ((pr->cmd_issue & (1 << slot)) &&
+            if ((pr->cmd_issue & (1U << slot)) &&
                 !handle_cmd(s, port, slot)) {
-                pr->cmd_issue &= ~(1 << slot);
+                pr->cmd_issue &= ~(1U << slot);
             }
         }
     }

hw/ide/core.c

@@ -1602,7 +1602,7 @@ static bool cmd_smart(IDEState *s, uint8_t cmd)
         case 2: /* extended self test */
             s->smart_selftest_count++;
             if (s->smart_selftest_count > 21) {
-                s->smart_selftest_count = 0;
+                s->smart_selftest_count = 1;
             }
             n = 2 + (s->smart_selftest_count - 1) * 24;
             s->smart_selftest_data[n] = s->sector;

hw/intc/allwinner-a10-pic.c

@@ -23,11 +23,20 @@
 static void aw_a10_pic_update(AwA10PICState *s)
 {
     uint8_t i;
-    int irq = 0, fiq = 0;
+    int irq = 0, fiq = 0, pending;
+
+    s->vector = 0;
 
     for (i = 0; i < AW_A10_PIC_REG_NUM; i++) {
         irq |= s->irq_pending[i] & ~s->mask[i];
         fiq |= s->select[i] & s->irq_pending[i] & ~s->mask[i];
+
+        if (!s->vector) {
+            pending = ffs(s->irq_pending[i] & ~s->mask[i]);
+            if (pending) {
+                s->vector = (i * 32 + pending - 1) * 4;
+            }
+        }
     }
 
     qemu_set_irq(s->parent_irq, !!irq);
@@ -40,6 +49,8 @@ static void aw_a10_pic_set_irq(void *opaque, int irq, int level)
 
     if (level) {
         set_bit(irq % 32, (void *)&s->irq_pending[irq / 32]);
+    } else {
+        clear_bit(irq % 32, (void *)&s->irq_pending[irq / 32]);
     }
     aw_a10_pic_update(s);
 }
@@ -84,9 +95,6 @@ static void aw_a10_pic_write(void *opaque, hwaddr offset, uint64_t value,
     uint8_t index = (offset & 0xc) / 4;
 
     switch (offset) {
-    case AW_A10_PIC_VECTOR:
-        s->vector = value & ~0x3;
-        break;
     case AW_A10_PIC_BASE_ADDR:
         s->base_addr = value & ~0x3;
     case AW_A10_PIC_PROTECT:
@@ -96,7 +104,11 @@ static void aw_a10_pic_write(void *opaque, hwaddr offset, uint64_t value,
         s->nmi = value;
         break;
     case AW_A10_PIC_IRQ_PENDING ... AW_A10_PIC_IRQ_PENDING + 8:
-        s->irq_pending[index] &= ~value;
+        /*
+         * The register is read-only; nevertheless, Linux (including
+         * the version originally shipped by Allwinner) pretends to
+         * write to the register. Just ignore it.
+         */
         break;
     case AW_A10_PIC_FIQ_PENDING ... AW_A10_PIC_FIQ_PENDING + 8:
         s->fiq_pending[index] &= ~value;

hw/intc/apic.c

@@ -98,8 +98,8 @@ static void apic_sync_vapic(APICCommonState *s, int sync_type)
         return;
     }
     if (sync_type & SYNC_FROM_VAPIC) {
-        cpu_physical_memory_rw(s->vapic_paddr, (void *)&vapic_state,
+        cpu_physical_memory_read(s->vapic_paddr, &vapic_state,
-                               sizeof(vapic_state), 0);
+                                 sizeof(vapic_state));
         s->tpr = vapic_state.tpr;
     }
     if (sync_type & (SYNC_TO_VAPIC | SYNC_ISR_IRR_TO_VAPIC)) {

hw/misc/ivshmem.c

@@ -684,8 +684,8 @@ static int pci_ivshmem_init(PCIDevice *dev)
     }
 
     if (s->role_val == IVSHMEM_PEER) {
-        error_set(&s->migration_blocker, QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
+        error_setg(&s->migration_blocker,
-                  "peer mode", "ivshmem");
+                   "Migration is disabled when using feature 'peer mode' in device 'ivshmem'");
         migrate_add_blocker(s->migration_blocker);
     }
 

hw/misc/zynq_slcr.c

@@ -19,34 +19,37 @@
 #include "hw/sysbus.h"
 #include "sysemu/sysemu.h"
 
-#ifdef ZYNQ_ARM_SLCR_ERR_DEBUG
+#ifndef ZYNQ_SLCR_ERR_DEBUG
+#define ZYNQ_SLCR_ERR_DEBUG 0
+#endif
+
 #define DB_PRINT(...) do { \
+        if (ZYNQ_SLCR_ERR_DEBUG) { \
             fprintf(stderr,  ": %s: ", __func__); \
             fprintf(stderr, ## __VA_ARGS__); \
+        } \
     } while (0);
-#else
-    #define DB_PRINT(...)
-#endif
 
 #define XILINX_LOCK_KEY 0x767b
 #define XILINX_UNLOCK_KEY 0xdf0d
 
 #define R_PSS_RST_CTRL_SOFT_RST 0x1
 
-typedef enum {
+enum {
-  ARM_PLL_CTRL,
+    SCL             = 0x000 / 4,
+    LOCK,
+    UNLOCK,
+    LOCKSTA,
+
+    ARM_PLL_CTRL    = 0x100 / 4,
     DDR_PLL_CTRL,
     IO_PLL_CTRL,
     PLL_STATUS,
-  ARM_PPL_CFG,
+    ARM_PLL_CFG,
     DDR_PLL_CFG,
     IO_PLL_CFG,
-  PLL_BG_CTRL,
-  PLL_MAX
-} PLLValues;
 
-typedef enum {
+    ARM_CLK_CTRL    = 0x120 / 4,
-  ARM_CLK_CTRL,
     DDR_CLK_CTRL,
     DCI_CLK_CTRL,
     APER_CLK_CTRL,
@@ -66,55 +69,105 @@ typedef enum {
     DBG_CLK_CTRL,
     PCAP_CLK_CTRL,
     TOPSW_CLK_CTRL,
-  CLK_MAX
-} ClkValues;
 
-typedef enum {
+#define FPGA_CTRL_REGS(n, start) \
-  CLK_CTRL,
+    FPGA ## n ## _CLK_CTRL = (start) / 4, \
-  THR_CTRL,
+    FPGA ## n ## _THR_CTRL, \
-  THR_CNT,
+    FPGA ## n ## _THR_CNT, \
-  THR_STA,
+    FPGA ## n ## _THR_STA,
-  FPGA_MAX
+    FPGA_CTRL_REGS(0, 0x170)
-} FPGAValues;
+    FPGA_CTRL_REGS(1, 0x180)
+    FPGA_CTRL_REGS(2, 0x190)
+    FPGA_CTRL_REGS(3, 0x1a0)
 
-typedef enum {
+    BANDGAP_TRIP    = 0x1b8 / 4,
-  SYNC_CTRL,
+    PLL_PREDIVISOR  = 0x1c0 / 4,
-  SYNC_STATUS,
-  BANDGAP_TRIP,
-  CC_TEST,
-  PLL_PREDIVISOR,
     CLK_621_TRUE,
-  PICTURE_DBG,
-  PICTURE_DBG_UCNT,
-  PICTURE_DBG_LCNT,
-  MISC_MAX
-} MiscValues;
 
-typedef enum {
+    PSS_RST_CTRL    = 0x200 / 4,
-  PSS,
+    DDR_RST_CTRL,
-  DDDR,
+    TOPSW_RESET_CTRL,
-  DMAC = 3,
+    DMAC_RST_CTRL,
-  USB,
+    USB_RST_CTRL,
-  GEM,
+    GEM_RST_CTRL,
-  SDIO,
+    SDIO_RST_CTRL,
-  SPI,
+    SPI_RST_CTRL,
-  CAN,
+    CAN_RST_CTRL,
-  I2C,
+    I2C_RST_CTRL,
-  UART,
+    UART_RST_CTRL,
-  GPIO,
+    GPIO_RST_CTRL,
-  LQSPI,
+    LQSPI_RST_CTRL,
-  SMC,
+    SMC_RST_CTRL,
-  OCM,
+    OCM_RST_CTRL,
-  DEVCI,
+    FPGA_RST_CTRL   = 0x240 / 4,
-  FPGA,
+    A9_CPU_RST_CTRL,
-  A9_CPU,
+
-  RS_AWDT,
+    RS_AWDT_CTRL    = 0x24c / 4,
     RST_REASON,
-  RST_REASON_CLR,
+
-  REBOOT_STATUS,
+    REBOOT_STATUS   = 0x258 / 4,
     BOOT_MODE,
-  RESET_MAX
+
-} ResetValues;
+    APU_CTRL        = 0x300 / 4,
+    WDT_CLK_SEL,
+
+    TZ_DMA_NS       = 0x440 / 4,
+    TZ_DMA_IRQ_NS,
+    TZ_DMA_PERIPH_NS,
+
+    PSS_IDCODE      = 0x530 / 4,
+
+    DDR_URGENT      = 0x600 / 4,
+    DDR_CAL_START   = 0x60c / 4,
+    DDR_REF_START   = 0x614 / 4,
+    DDR_CMD_STA,
+    DDR_URGENT_SEL,
+    DDR_DFI_STATUS,
+
+    MIO             = 0x700 / 4,
+#define MIO_LENGTH 54
+
+    MIO_LOOPBACK    = 0x804 / 4,
+    MIO_MST_TRI0,
+    MIO_MST_TRI1,
+
+    SD0_WP_CD_SEL   = 0x830 / 4,
+    SD1_WP_CD_SEL,
+
+    LVL_SHFTR_EN    = 0x900 / 4,
+    OCM_CFG         = 0x910 / 4,
+
+    CPU_RAM         = 0xa00 / 4,
+
+    IOU             = 0xa30 / 4,
+
+    DMAC_RAM        = 0xa50 / 4,
+
+    AFI0            = 0xa60 / 4,
+    AFI1 = AFI0 + 3,
+    AFI2 = AFI1 + 3,
+    AFI3 = AFI2 + 3,
+#define AFI_LENGTH 3
+
+    OCM             = 0xa90 / 4,
+
+    DEVCI_RAM       = 0xaa0 / 4,
+
+    CSG_RAM         = 0xab0 / 4,
+
+    GPIOB_CTRL      = 0xb00 / 4,
+    GPIOB_CFG_CMOS18,
+    GPIOB_CFG_CMOS25,
+    GPIOB_CFG_CMOS33,
+    GPIOB_CFG_HSTL  = 0xb14 / 4,
+    GPIOB_DRVR_BIAS_CTRL,
+
+    DDRIOB          = 0xb40 / 4,
+#define DDRIOB_LENGTH 14
+};
+
+#define ZYNQ_SLCR_MMIO_SIZE     0x1000
+#define ZYNQ_SLCR_NUM_REGS      (ZYNQ_SLCR_MMIO_SIZE / 4)
 
 #define TYPE_ZYNQ_SLCR "xilinx,zynq_slcr"
 #define ZYNQ_SLCR(obj) OBJECT_CHECK(ZynqSLCRState, (obj), TYPE_ZYNQ_SLCR)
@@ -124,42 +177,7 @@ typedef struct ZynqSLCRState {
 
     MemoryRegion iomem;
 
-    union {
+    uint32_t regs[ZYNQ_SLCR_NUM_REGS];
-        struct {
-            uint16_t scl;
-            uint16_t lockval;
-            uint32_t pll[PLL_MAX]; /* 0x100 - 0x11C */
-            uint32_t clk[CLK_MAX]; /* 0x120 - 0x16C */
-            uint32_t fpga[4][FPGA_MAX]; /* 0x170 - 0x1AC */
-            uint32_t misc[MISC_MAX]; /* 0x1B0 - 0x1D8 */
-            uint32_t reset[RESET_MAX]; /* 0x200 - 0x25C */
-            uint32_t apu_ctrl; /* 0x300 */
-            uint32_t wdt_clk_sel; /* 0x304 */
-            uint32_t tz_ocm[3]; /* 0x400 - 0x408 */
-            uint32_t tz_ddr; /* 0x430 */
-            uint32_t tz_dma[3]; /* 0x440 - 0x448 */
-            uint32_t tz_misc[3]; /* 0x450 - 0x458 */
-            uint32_t tz_fpga[2]; /* 0x484 - 0x488 */
-            uint32_t dbg_ctrl; /* 0x500 */
-            uint32_t pss_idcode; /* 0x530 */
-            uint32_t ddr[8]; /* 0x600 - 0x620 - 0x604-missing */
-            uint32_t mio[54]; /* 0x700 - 0x7D4 */
-            uint32_t mio_func[4]; /* 0x800 - 0x810 */
-            uint32_t sd[2]; /* 0x830 - 0x834 */
-            uint32_t lvl_shftr_en; /* 0x900 */
-            uint32_t ocm_cfg; /* 0x910 */
-            uint32_t cpu_ram[8]; /* 0xA00 - 0xA1C */
-            uint32_t iou[7]; /* 0xA30 - 0xA48 */
-            uint32_t dmac_ram; /* 0xA50 */
-            uint32_t afi[4][3]; /* 0xA60 - 0xA8C */
-            uint32_t ocm[3]; /* 0xA90 - 0xA98 */
-            uint32_t devci_ram; /* 0xAA0 */
-            uint32_t csg_ram; /* 0xAB0 */
-            uint32_t gpiob[12]; /* 0xB00 - 0xB2C */
-            uint32_t ddriob[14]; /* 0xB40 - 0xB74 */
-        };
-        uint8_t data[0x1000];
-    };
 } ZynqSLCRState;
 
 static void zynq_slcr_reset(DeviceState *d)
@@ -169,177 +187,169 @@ static void zynq_slcr_reset(DeviceState *d)
 
     DB_PRINT("RESET\n");
 
-    s->lockval = 1;
+    s->regs[LOCKSTA] = 1;
     /* 0x100 - 0x11C */
-    s->pll[ARM_PLL_CTRL] = 0x0001A008;
+    s->regs[ARM_PLL_CTRL]   = 0x0001A008;
-    s->pll[DDR_PLL_CTRL] = 0x0001A008;
+    s->regs[DDR_PLL_CTRL]   = 0x0001A008;
-    s->pll[IO_PLL_CTRL] = 0x0001A008;
+    s->regs[IO_PLL_CTRL]    = 0x0001A008;
-    s->pll[PLL_STATUS] = 0x0000003F;
+    s->regs[PLL_STATUS]     = 0x0000003F;
-    s->pll[ARM_PPL_CFG] = 0x00014000;
+    s->regs[ARM_PLL_CFG]    = 0x00014000;
-    s->pll[DDR_PLL_CFG] = 0x00014000;
+    s->regs[DDR_PLL_CFG]    = 0x00014000;
-    s->pll[IO_PLL_CFG] = 0x00014000;
+    s->regs[IO_PLL_CFG]     = 0x00014000;
 
     /* 0x120 - 0x16C */
-    s->clk[ARM_CLK_CTRL] = 0x1F000400;
+    s->regs[ARM_CLK_CTRL]   = 0x1F000400;
-    s->clk[DDR_CLK_CTRL] = 0x18400003;
+    s->regs[DDR_CLK_CTRL]   = 0x18400003;
-    s->clk[DCI_CLK_CTRL] = 0x01E03201;
+    s->regs[DCI_CLK_CTRL]   = 0x01E03201;
-    s->clk[APER_CLK_CTRL] = 0x01FFCCCD;
+    s->regs[APER_CLK_CTRL]  = 0x01FFCCCD;
-    s->clk[USB0_CLK_CTRL] = s->clk[USB1_CLK_CTRL] = 0x00101941;
+    s->regs[USB0_CLK_CTRL]  = s->regs[USB1_CLK_CTRL]    = 0x00101941;
-    s->clk[GEM0_RCLK_CTRL] = s->clk[GEM1_RCLK_CTRL] = 0x00000001;
+    s->regs[GEM0_RCLK_CTRL] = s->regs[GEM1_RCLK_CTRL]   = 0x00000001;
-    s->clk[GEM0_CLK_CTRL] = s->clk[GEM1_CLK_CTRL] = 0x00003C01;
+    s->regs[GEM0_CLK_CTRL]  = s->regs[GEM1_CLK_CTRL]    = 0x00003C01;
-    s->clk[SMC_CLK_CTRL] = 0x00003C01;
+    s->regs[SMC_CLK_CTRL]   = 0x00003C01;
-    s->clk[LQSPI_CLK_CTRL] = 0x00002821;
+    s->regs[LQSPI_CLK_CTRL] = 0x00002821;
-    s->clk[SDIO_CLK_CTRL] = 0x00001E03;
+    s->regs[SDIO_CLK_CTRL]  = 0x00001E03;
-    s->clk[UART_CLK_CTRL] = 0x00003F03;
+    s->regs[UART_CLK_CTRL]  = 0x00003F03;
-    s->clk[SPI_CLK_CTRL] = 0x00003F03;
+    s->regs[SPI_CLK_CTRL]   = 0x00003F03;
-    s->clk[CAN_CLK_CTRL] = 0x00501903;
+    s->regs[CAN_CLK_CTRL]   = 0x00501903;
-    s->clk[DBG_CLK_CTRL] = 0x00000F03;
+    s->regs[DBG_CLK_CTRL]   = 0x00000F03;
-    s->clk[PCAP_CLK_CTRL] = 0x00000F01;
+    s->regs[PCAP_CLK_CTRL]  = 0x00000F01;
 
     /* 0x170 - 0x1AC */
-    s->fpga[0][CLK_CTRL] = s->fpga[1][CLK_CTRL] = s->fpga[2][CLK_CTRL] =
+    s->regs[FPGA0_CLK_CTRL] = s->regs[FPGA1_CLK_CTRL] = s->regs[FPGA2_CLK_CTRL]
-            s->fpga[3][CLK_CTRL] = 0x00101800;
+                            = s->regs[FPGA3_CLK_CTRL] = 0x00101800;
-    s->fpga[0][THR_STA] = s->fpga[1][THR_STA] = s->fpga[2][THR_STA] =
+    s->regs[FPGA0_THR_STA] = s->regs[FPGA1_THR_STA] = s->regs[FPGA2_THR_STA]
-            s->fpga[3][THR_STA] = 0x00010000;
+                           = s->regs[FPGA3_THR_STA] = 0x00010000;
 
     /* 0x1B0 - 0x1D8 */
-    s->misc[BANDGAP_TRIP] = 0x0000001F;
+    s->regs[BANDGAP_TRIP]   = 0x0000001F;
-    s->misc[PLL_PREDIVISOR] = 0x00000001;
+    s->regs[PLL_PREDIVISOR] = 0x00000001;
-    s->misc[CLK_621_TRUE] = 0x00000001;
+    s->regs[CLK_621_TRUE]   = 0x00000001;
 
     /* 0x200 - 0x25C */
-    s->reset[FPGA] = 0x01F33F0F;
+    s->regs[FPGA_RST_CTRL]  = 0x01F33F0F;
-    s->reset[RST_REASON] = 0x00000040;
+    s->regs[RST_REASON]     = 0x00000040;
+
+    s->regs[BOOT_MODE]      = 0x00000001;
 
     /* 0x700 - 0x7D4 */
     for (i = 0; i < 54; i++) {
-        s->mio[i] = 0x00001601;
+        s->regs[MIO + i] = 0x00001601;
     }
     for (i = 2; i <= 8; i++) {
-        s->mio[i] = 0x00000601;
+        s->regs[MIO + i] = 0x00000601;
     }
 
-    /* MIO_MST_TRI0, MIO_MST_TRI1 */
+    s->regs[MIO_MST_TRI0] = s->regs[MIO_MST_TRI1] = 0xFFFFFFFF;
-    s->mio_func[2] = s->mio_func[3] = 0xFFFFFFFF;
 
-    s->cpu_ram[0] = s->cpu_ram[1] = s->cpu_ram[3] =
+    s->regs[CPU_RAM + 0] = s->regs[CPU_RAM + 1] = s->regs[CPU_RAM + 3]
-            s->cpu_ram[4] = s->cpu_ram[7] = 0x00010101;
+                         = s->regs[CPU_RAM + 4] = s->regs[CPU_RAM + 7]
-    s->cpu_ram[2] = s->cpu_ram[5] = 0x01010101;
+                         = 0x00010101;
-    s->cpu_ram[6] = 0x00000001;
+    s->regs[CPU_RAM + 2] = s->regs[CPU_RAM + 5] = 0x01010101;
+    s->regs[CPU_RAM + 6] = 0x00000001;
 
-    s->iou[0] = s->iou[1] = s->iou[2] = s->iou[3] = 0x09090909;
+    s->regs[IOU + 0] = s->regs[IOU + 1] = s->regs[IOU + 2] = s->regs[IOU + 3]
-    s->iou[4] = s->iou[5] = 0x00090909;
+                     = 0x09090909;
-    s->iou[6] = 0x00000909;
+    s->regs[IOU + 4] = s->regs[IOU + 5] = 0x00090909;
+    s->regs[IOU + 6] = 0x00000909;
 
-    s->dmac_ram = 0x00000009;
+    s->regs[DMAC_RAM] = 0x00000009;
 
-    s->afi[0][0] = s->afi[0][1] = 0x09090909;
+    s->regs[AFI0 + 0] = s->regs[AFI0 + 1] = 0x09090909;
-    s->afi[1][0] = s->afi[1][1] = 0x09090909;
+    s->regs[AFI1 + 0] = s->regs[AFI1 + 1] = 0x09090909;
-    s->afi[2][0] = s->afi[2][1] = 0x09090909;
+    s->regs[AFI2 + 0] = s->regs[AFI2 + 1] = 0x09090909;
-    s->afi[3][0] = s->afi[3][1] = 0x09090909;
+    s->regs[AFI3 + 0] = s->regs[AFI3 + 1] = 0x09090909;
-    s->afi[0][2] = s->afi[1][2] = s->afi[2][2] = s->afi[3][2] = 0x00000909;
+    s->regs[AFI0 + 2] = s->regs[AFI1 + 2] = s->regs[AFI2 + 2]
+                      = s->regs[AFI3 + 2] = 0x00000909;
 
-    s->ocm[0] = 0x01010101;
+    s->regs[OCM + 0]    = 0x01010101;
-    s->ocm[1] = s->ocm[2] = 0x09090909;
+    s->regs[OCM + 1]    = s->regs[OCM + 2] = 0x09090909;
 
-    s->devci_ram = 0x00000909;
+    s->regs[DEVCI_RAM]  = 0x00000909;
-    s->csg_ram = 0x00000001;
+    s->regs[CSG_RAM]    = 0x00000001;
 
-    s->ddriob[0] = s->ddriob[1] = s->ddriob[2] = s->ddriob[3] = 0x00000e00;
+    s->regs[DDRIOB + 0] = s->regs[DDRIOB + 1] = s->regs[DDRIOB + 2]
-    s->ddriob[4] = s->ddriob[5] = s->ddriob[6] = 0x00000e00;
+                        = s->regs[DDRIOB + 3] = 0x00000e00;
-    s->ddriob[12] = 0x00000021;
+    s->regs[DDRIOB + 4] = s->regs[DDRIOB + 5] = s->regs[DDRIOB + 6]
+                        = 0x00000e00;
+    s->regs[DDRIOB + 12] = 0x00000021;
 }
 
-static inline uint32_t zynq_slcr_read_imp(void *opaque,
-    hwaddr offset)
-{
-    ZynqSLCRState *s = (ZynqSLCRState *)opaque;
 
+static bool zynq_slcr_check_offset(hwaddr offset, bool rnw)
+{
     switch (offset) {
-    case 0x0: /* SCL */
+    case LOCK:
-        return s->scl;
+    case UNLOCK:
-    case 0x4: /* LOCK */
+    case DDR_CAL_START:
-    case 0x8: /* UNLOCK */
+    case DDR_REF_START:
-        DB_PRINT("Reading SCLR_LOCK/UNLOCK is not enabled\n");
+        return !rnw; /* Write only */
-        return 0;
+    case LOCKSTA:
-    case 0x0C: /* LOCKSTA */
+    case FPGA0_THR_STA:
-        return s->lockval;
+    case FPGA1_THR_STA:
-    case 0x100 ... 0x11C:
+    case FPGA2_THR_STA:
-        return s->pll[(offset - 0x100) / 4];
+    case FPGA3_THR_STA:
-    case 0x120 ... 0x16C:
+    case BOOT_MODE:
-        return s->clk[(offset - 0x120) / 4];
+    case PSS_IDCODE:
-    case 0x170 ... 0x1AC:
+    case DDR_CMD_STA:
-        return s->fpga[0][(offset - 0x170) / 4];
+    case DDR_DFI_STATUS:
-    case 0x1B0 ... 0x1D8:
+    case PLL_STATUS:
-        return s->misc[(offset - 0x1B0) / 4];
+        return rnw;/* read only */
-    case 0x200 ... 0x258:
+    case SCL:
-        return s->reset[(offset - 0x200) / 4];
+    case ARM_PLL_CTRL ... IO_PLL_CTRL:
-    case 0x25c:
+    case ARM_PLL_CFG ... IO_PLL_CFG:
-        return 1;
+    case ARM_CLK_CTRL ... TOPSW_CLK_CTRL:
-    case 0x300:
+    case FPGA0_CLK_CTRL ... FPGA0_THR_CNT:
-        return s->apu_ctrl;
+    case FPGA1_CLK_CTRL ... FPGA1_THR_CNT:
-    case 0x304:
+    case FPGA2_CLK_CTRL ... FPGA2_THR_CNT:
-        return s->wdt_clk_sel;
+    case FPGA3_CLK_CTRL ... FPGA3_THR_CNT:
-    case 0x400 ... 0x408:
+    case BANDGAP_TRIP:
-        return s->tz_ocm[(offset - 0x400) / 4];
+    case PLL_PREDIVISOR:
-    case 0x430:
+    case CLK_621_TRUE:
-        return s->tz_ddr;
+    case PSS_RST_CTRL ... A9_CPU_RST_CTRL:
-    case 0x440 ... 0x448:
+    case RS_AWDT_CTRL:
-        return s->tz_dma[(offset - 0x440) / 4];
+    case RST_REASON:
-    case 0x450 ... 0x458:
+    case REBOOT_STATUS:
-        return s->tz_misc[(offset - 0x450) / 4];
+    case APU_CTRL:
-    case 0x484 ... 0x488:
+    case WDT_CLK_SEL:
-        return s->tz_fpga[(offset - 0x484) / 4];
+    case TZ_DMA_NS ... TZ_DMA_PERIPH_NS:
-    case 0x500:
+    case DDR_URGENT:
-        return s->dbg_ctrl;
+    case DDR_URGENT_SEL:
-    case 0x530:
+    case MIO ... MIO + MIO_LENGTH - 1:
-        return s->pss_idcode;
+    case MIO_LOOPBACK ... MIO_MST_TRI1:
-    case 0x600 ... 0x620:
+    case SD0_WP_CD_SEL:
-        if (offset == 0x604) {
+    case SD1_WP_CD_SEL:
-            goto bad_reg;
+    case LVL_SHFTR_EN:
-        }
+    case OCM_CFG:
-        return s->ddr[(offset - 0x600) / 4];
+    case CPU_RAM:
-    case 0x700 ... 0x7D4:
+    case IOU:
-        return s->mio[(offset - 0x700) / 4];
+    case DMAC_RAM:
-    case 0x800 ... 0x810:
+    case AFI0 ... AFI3 + AFI_LENGTH - 1:
-        return s->mio_func[(offset - 0x800) / 4];
+    case OCM:
-    case 0x830 ... 0x834:
+    case DEVCI_RAM:
-        return s->sd[(offset - 0x830) / 4];
+    case CSG_RAM:
-    case 0x900:
+    case GPIOB_CTRL ... GPIOB_CFG_CMOS33:
-        return s->lvl_shftr_en;
+    case GPIOB_CFG_HSTL:
-    case 0x910:
+    case GPIOB_DRVR_BIAS_CTRL:
-        return s->ocm_cfg;
+    case DDRIOB ... DDRIOB + DDRIOB_LENGTH - 1:
-    case 0xA00 ... 0xA1C:
+        return true;
-        return s->cpu_ram[(offset - 0xA00) / 4];
-    case 0xA30 ... 0xA48:
-        return s->iou[(offset - 0xA30) / 4];
-    case 0xA50:
-        return s->dmac_ram;
-    case 0xA60 ... 0xA8C:
-        return s->afi[0][(offset - 0xA60) / 4];
-    case 0xA90 ... 0xA98:
-        return s->ocm[(offset - 0xA90) / 4];
-    case 0xAA0:
-        return s->devci_ram;
-    case 0xAB0:
-        return s->csg_ram;
-    case 0xB00 ... 0xB2C:
-        return s->gpiob[(offset - 0xB00) / 4];
-    case 0xB40 ... 0xB74:
-        return s->ddriob[(offset - 0xB40) / 4];
     default:
-    bad_reg:
+        return false;
-        DB_PRINT("Bad register offset 0x%x\n", (int)offset);
-        return 0;
     }
 }
 
 static uint64_t zynq_slcr_read(void *opaque, hwaddr offset,
     unsigned size)
 {
-    uint32_t ret = zynq_slcr_read_imp(opaque, offset);
+    ZynqSLCRState *s = opaque;
+    offset /= 4;
+    uint32_t ret = s->regs[offset];
 
-    DB_PRINT("addr: %08x data: %08x\n", (unsigned)offset, (unsigned)ret);
+    if (!zynq_slcr_check_offset(offset, true)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid read access to "
+                      " addr %" HWADDR_PRIx "\n", offset * 4);
+    }
+
+    DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx32 "\n", offset * 4, ret);
     return ret;
 }
 
@@ -347,148 +357,55 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
                           uint64_t val, unsigned size)
 {
     ZynqSLCRState *s = (ZynqSLCRState *)opaque;
+    offset /= 4;
 
-    DB_PRINT("offset: %08x data: %08x\n", (unsigned)offset, (unsigned)val);
+    DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx64 "\n", offset * 4, val);
+
+    if (!zynq_slcr_check_offset(offset, false)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid write access to "
+                      "addr %" HWADDR_PRIx "\n", offset * 4);
+        return;
+    }
 
     switch (offset) {
-    case 0x00: /* SCL */
+    case SCL:
-        s->scl = val & 0x1;
+        s->regs[SCL] = val & 0x1;
         return;
-    case 0x4: /* SLCR_LOCK */
+    case LOCK:
         if ((val & 0xFFFF) == XILINX_LOCK_KEY) {
             DB_PRINT("XILINX LOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
                 (unsigned)val & 0xFFFF);
-            s->lockval = 1;
+            s->regs[LOCKSTA] = 1;
         } else {
             DB_PRINT("WRONG XILINX LOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
                 (int)offset, (unsigned)val & 0xFFFF);
         }
         return;
-    case 0x8: /* SLCR_UNLOCK */
+    case UNLOCK:
         if ((val & 0xFFFF) == XILINX_UNLOCK_KEY) {
             DB_PRINT("XILINX UNLOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
                 (unsigned)val & 0xFFFF);
-            s->lockval = 0;
+            s->regs[LOCKSTA] = 0;
         } else {
             DB_PRINT("WRONG XILINX UNLOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
                 (int)offset, (unsigned)val & 0xFFFF);
         }
         return;
-    case 0xc: /* LOCKSTA */
+    }
-        DB_PRINT("Writing SCLR_LOCKSTA is not enabled\n");
+
+    if (!s->regs[LOCKSTA]) {
+        s->regs[offset / 4] = val;
+    } else {
+        DB_PRINT("SCLR registers are locked. Unlock them first\n");
         return;
     }
 
-    if (!s->lockval) {
     switch (offset) {
-        case 0x100 ... 0x11C:
+    case PSS_RST_CTRL:
-            if (offset == 0x10C) {
+        if (val & R_PSS_RST_CTRL_SOFT_RST) {
-                goto bad_reg;
-            }
-            s->pll[(offset - 0x100) / 4] = val;
-            break;
-        case 0x120 ... 0x16C:
-            s->clk[(offset - 0x120) / 4] = val;
-            break;
-        case 0x170 ... 0x1AC:
-            s->fpga[0][(offset - 0x170) / 4] = val;
-            break;
-        case 0x1B0 ... 0x1D8:
-            s->misc[(offset - 0x1B0) / 4] = val;
-            break;
-        case 0x200 ... 0x25C:
-            if (offset == 0x250) {
-                goto bad_reg;
-            }
-            s->reset[(offset - 0x200) / 4] = val;
-            if (offset == 0x200 && (val & R_PSS_RST_CTRL_SOFT_RST)) {
             qemu_system_reset_request();
         }
         break;
-        case 0x300:
-            s->apu_ctrl = val;
-            break;
-        case 0x304:
-            s->wdt_clk_sel = val;
-            break;
-        case 0x400 ... 0x408:
-            s->tz_ocm[(offset - 0x400) / 4] = val;
-            break;
-        case 0x430:
-            s->tz_ddr = val;
-            break;
-        case 0x440 ... 0x448:
-            s->tz_dma[(offset - 0x440) / 4] = val;
-            break;
-        case 0x450 ... 0x458:
-            s->tz_misc[(offset - 0x450) / 4] = val;
-            break;
-        case 0x484 ... 0x488:
-            s->tz_fpga[(offset - 0x484) / 4] = val;
-            break;
-        case 0x500:
-            s->dbg_ctrl = val;
-            break;
-        case 0x530:
-            s->pss_idcode = val;
-            break;
-        case 0x600 ... 0x620:
-            if (offset == 0x604) {
-                goto bad_reg;
-            }
-            s->ddr[(offset - 0x600) / 4] = val;
-            break;
-        case 0x700 ... 0x7D4:
-            s->mio[(offset - 0x700) / 4] = val;
-            break;
-        case 0x800 ... 0x810:
-            s->mio_func[(offset - 0x800) / 4] = val;
-            break;
-        case 0x830 ... 0x834:
-            s->sd[(offset - 0x830) / 4] = val;
-            break;
-        case 0x900:
-            s->lvl_shftr_en = val;
-            break;
-        case 0x910:
-            break;
-        case 0xA00 ... 0xA1C:
-            s->cpu_ram[(offset - 0xA00) / 4] = val;
-            break;
-        case 0xA30 ... 0xA48:
-            s->iou[(offset - 0xA30) / 4] = val;
-            break;
-        case 0xA50:
-            s->dmac_ram = val;
-            break;
-        case 0xA60 ... 0xA8C:
-            s->afi[0][(offset - 0xA60) / 4] = val;
-            break;
-        case 0xA90:
-            s->ocm[0] = val;
-            break;
-        case 0xAA0:
-            s->devci_ram = val;
-            break;
-        case 0xAB0:
-            s->csg_ram = val;
-            break;
-        case 0xB00 ... 0xB2C:
-            if (offset == 0xB20 || offset == 0xB2C) {
-                goto bad_reg;
-            }
-            s->gpiob[(offset - 0xB00) / 4] = val;
-            break;
-        case 0xB40 ... 0xB74:
-            s->ddriob[(offset - 0xB40) / 4] = val;
-            break;
-        default:
-        bad_reg:
-            DB_PRINT("Bad register write %x <= %08x\n", (int)offset,
-                     (unsigned)val);
-        }
-    } else {
-        DB_PRINT("SCLR registers are locked. Unlock them first\n");
     }
 }
 
@@ -498,23 +415,22 @@ static const MemoryRegionOps slcr_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static int zynq_slcr_init(SysBusDevice *dev)
+static void zynq_slcr_init(Object *obj)
 {
-    ZynqSLCRState *s = ZYNQ_SLCR(dev);
+    ZynqSLCRState *s = ZYNQ_SLCR(obj);
 
-    memory_region_init_io(&s->iomem, OBJECT(s), &slcr_ops, s, "slcr", 0x1000);
+    memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr",
-    sysbus_init_mmio(dev, &s->iomem);
+                          ZYNQ_SLCR_MMIO_SIZE);
-
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
-    return 0;
 }
 
 static const VMStateDescription vmstate_zynq_slcr = {
     .name = "zynq_slcr",
-    .version_id = 1,
+    .version_id = 2,
-    .minimum_version_id = 1,
+    .minimum_version_id = 2,
-    .minimum_version_id_old = 1,
+    .minimum_version_id_old = 2,
     .fields      = (VMStateField[]) {
-        VMSTATE_UINT8_ARRAY(data, ZynqSLCRState, 0x1000),
+        VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -522,9 +438,7 @@ static const VMStateDescription vmstate_zynq_slcr = {
 static void zynq_slcr_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
 
-    sdc->init = zynq_slcr_init;
     dc->vmsd = &vmstate_zynq_slcr;
     dc->reset = zynq_slcr_reset;
 }
@@ -534,6 +448,7 @@ static const TypeInfo zynq_slcr_info = {
     .name  = TYPE_ZYNQ_SLCR,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size  = sizeof(ZynqSLCRState),
+    .instance_init = zynq_slcr_init,
 };
 
 static void zynq_slcr_register_types(void)

hw/net/allwinner_emac.c

@@ -27,11 +27,11 @@ static uint8_t padding[60];
 static void mii_set_link(RTL8201CPState *mii, bool link_ok)
 {
     if (link_ok) {
-        mii->bmsr |= MII_BMSR_LINK_ST;
+        mii->bmsr |= MII_BMSR_LINK_ST | MII_BMSR_AN_COMP;
         mii->anlpar |= MII_ANAR_TXFD | MII_ANAR_10FD | MII_ANAR_10 |
                        MII_ANAR_CSMACD;
     } else {
-        mii->bmsr &= ~MII_BMSR_LINK_ST;
+        mii->bmsr &= ~(MII_BMSR_LINK_ST | MII_BMSR_AN_COMP);
         mii->anlpar = MII_ANAR_TX;
     }
 }
@@ -391,9 +391,11 @@ static void aw_emac_write(void *opaque, hwaddr offset, uint64_t value,
         break;
     case EMAC_INT_CTL_REG:
         s->int_ctl = value;
+        aw_emac_update_irq(s);
         break;
     case EMAC_INT_STA_REG:
         s->int_sta &= ~value;
+        aw_emac_update_irq(s);
         break;
     case EMAC_MAC_MADR_REG:
         s->phy_target = value;

hw/net/cadence_gem.c

@@ -1093,7 +1093,7 @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
             uint32_t phy_addr, reg_num;
 
             phy_addr = (retval & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT;
-            if (phy_addr == BOARD_PHY_ADDRESS) {
+            if (phy_addr == BOARD_PHY_ADDRESS || phy_addr == 0) {
                 reg_num = (retval & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT;
                 retval &= 0xFFFF0000;
                 retval |= gem_phy_read(s, reg_num);
@@ -1193,7 +1193,7 @@ static void gem_write(void *opaque, hwaddr offset, uint64_t val,
             uint32_t phy_addr, reg_num;
 
             phy_addr = (val & GEM_PHYMNTNC_ADDR) >> GEM_PHYMNTNC_ADDR_SHFT;
-            if (phy_addr == BOARD_PHY_ADDRESS) {
+            if (phy_addr == BOARD_PHY_ADDRESS || phy_addr == 0) {
                 reg_num = (val & GEM_PHYMNTNC_REG) >> GEM_PHYMNTNC_REG_SHIFT;
                 gem_phy_write(s, reg_num, val);
             }

hw/net/pcnet.c

@@ -718,7 +718,6 @@ static void pcnet_s_reset(PCNetState *s)
     s->csr[94]  = 0x0000;
     s->csr[100] = 0x0200;
     s->csr[103] = 0x0105;
-    s->csr[103] = 0x0105;
     s->csr[112] = 0x0000;
     s->csr[114] = 0x0000;
     s->csr[122] = 0x0000;

hw/net/virtio-net.c

@@ -677,7 +677,7 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
         goto error;
     }
 
-    if (in_use + mac_data.entries <= MAC_TABLE_ENTRIES) {
+    if (mac_data.entries <= MAC_TABLE_ENTRIES - in_use) {
         s = iov_to_buf(iov, iov_cnt, 0, &macs[in_use * ETH_ALEN],
                        mac_data.entries * ETH_ALEN);
         if (s != mac_data.entries * ETH_ALEN) {

hw/net/vmxnet3.c

@@ -52,6 +52,9 @@
 #define VMXNET3_DEVICE_VERSION    0x1
 #define VMXNET3_DEVICE_REVISION   0x1
 
+/* Number of interrupt vectors for non-MSIx modes */
+#define VMXNET3_MAX_NMSIX_INTRS   (1)
+
 /* Macros for rings descriptors access */
 #define VMXNET3_READ_TX_QUEUE_DESCR8(dpa, field) \
     (vmw_shmem_ld8(dpa + offsetof(struct Vmxnet3_TxQueueDesc, field)))
@@ -1305,6 +1308,51 @@ static bool vmxnet3_verify_intx(VMXNET3State *s, int intx)
            (pci_get_byte(s->parent_obj.config + PCI_INTERRUPT_PIN) - 1));
 }
 
+static void vmxnet3_validate_interrupt_idx(bool is_msix, int idx)
+{
+    int max_ints = is_msix ? VMXNET3_MAX_INTRS : VMXNET3_MAX_NMSIX_INTRS;
+    if (idx >= max_ints) {
+        hw_error("Bad interrupt index: %d\n", idx);
+    }
+}
+
+static void vmxnet3_validate_interrupts(VMXNET3State *s)
+{
+    int i;
+
+    VMW_CFPRN("Verifying event interrupt index (%d)", s->event_int_idx);
+    vmxnet3_validate_interrupt_idx(s->msix_used, s->event_int_idx);
+
+    for (i = 0; i < s->txq_num; i++) {
+        int idx = s->txq_descr[i].intr_idx;
+        VMW_CFPRN("Verifying TX queue %d interrupt index (%d)", i, idx);
+        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
+    }
+
+    for (i = 0; i < s->rxq_num; i++) {
+        int idx = s->rxq_descr[i].intr_idx;
+        VMW_CFPRN("Verifying RX queue %d interrupt index (%d)", i, idx);
+        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
+    }
+}
+
+static void vmxnet3_validate_queues(VMXNET3State *s)
+{
+    /*
+    * txq_num and rxq_num are total number of queues
+    * configured by guest. These numbers must not
+    * exceed corresponding maximal values.
+    */
+
+    if (s->txq_num > VMXNET3_DEVICE_MAX_TX_QUEUES) {
+        hw_error("Bad TX queues number: %d\n", s->txq_num);
+    }
+
+    if (s->rxq_num > VMXNET3_DEVICE_MAX_RX_QUEUES) {
+        hw_error("Bad RX queues number: %d\n", s->rxq_num);
+    }
+}
+
 static void vmxnet3_activate_device(VMXNET3State *s)
 {
     int i;
@@ -1351,7 +1399,7 @@ static void vmxnet3_activate_device(VMXNET3State *s)
         VMXNET3_READ_DRV_SHARED8(s->drv_shmem, devRead.misc.numRxQueues);
 
     VMW_CFPRN("Number of TX/RX queues %u/%u", s->txq_num, s->rxq_num);
-    assert(s->txq_num <= VMXNET3_DEVICE_MAX_TX_QUEUES);
+    vmxnet3_validate_queues(s);
 
     qdescr_table_pa =
         VMXNET3_READ_DRV_SHARED64(s->drv_shmem, devRead.misc.queueDescPA);
@@ -1447,6 +1495,8 @@ static void vmxnet3_activate_device(VMXNET3State *s)
                sizeof(s->rxq_descr[i].rxq_stats));
     }
 
+    vmxnet3_validate_interrupts(s);
+
     /* Make sure everything is in place before device activation */
     smp_wmb();
 
@@ -2005,7 +2055,6 @@ vmxnet3_cleanup_msix(VMXNET3State *s)
     }
 }
 
-#define VMXNET3_MSI_NUM_VECTORS   (1)
 #define VMXNET3_MSI_OFFSET        (0x50)
 #define VMXNET3_USE_64BIT         (true)
 #define VMXNET3_PER_VECTOR_MASK   (false)
@@ -2016,7 +2065,7 @@ vmxnet3_init_msi(VMXNET3State *s)
     PCIDevice *d = PCI_DEVICE(s);
     int res;
 
-    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MSI_NUM_VECTORS,
+    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MAX_NMSIX_INTRS,
                    VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK);
     if (0 > res) {
         VMW_WRPRN("Failed to initialize MSI, error %d", res);
@@ -2342,6 +2391,9 @@ static int vmxnet3_post_load(void *opaque, int version_id)
         }
     }
 
+    vmxnet3_validate_queues(s);
+    vmxnet3_validate_interrupts(s);
+
     return 0;
 }
 

hw/net/xilinx_axienet.c

@@ -98,7 +98,7 @@ static unsigned int tdk_read(struct PHY *phy, unsigned int req)
             r |= 1;
             break;
         case 17:
-            /* Marvel PHY on many xilinx boards.  */
+            /* Marvell PHY on many xilinx boards.  */
             r = 0x8000; /* 1000Mb  */
             break;
         case 18:
@@ -142,6 +142,9 @@ tdk_write(struct PHY *phy, unsigned int req, unsigned int data)
             phy->regs[regnum] = data;
             break;
     }
+
+    /* Unconditionally clear regs[BMCR][BMCR_RESET] */
+    phy->regs[0] &= ~0x8000;
 }
 
 static void

hw/timer/allwinner-a10-pit.c

@@ -19,6 +19,15 @@
 #include "sysemu/sysemu.h"
 #include "hw/timer/allwinner-a10-pit.h"
 
+static void a10_pit_update_irq(AwA10PITState *s)
+{
+    int i;
+
+    for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
+        qemu_set_irq(s->irq[i], !!(s->irq_status & s->irq_enable & (1 << i)));
+    }
+}
+
 static uint64_t a10_pit_read(void *opaque, hwaddr offset, unsigned size)
 {
     AwA10PITState *s = AW_A10_PIT(opaque);
@@ -65,6 +74,22 @@ static uint64_t a10_pit_read(void *opaque, hwaddr offset, unsigned size)
     return 0;
 }
 
+static void a10_pit_set_freq(AwA10PITState *s, int index)
+{
+    uint32_t prescaler, source, source_freq;
+
+    prescaler = 1 << extract32(s->control[index], 4, 3);
+    source = extract32(s->control[index], 2, 2);
+    source_freq = s->clk_freq[source];
+
+    if (source_freq) {
+        ptimer_set_freq(s->timer[index], source_freq / prescaler);
+    } else {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid clock source %u\n",
+                      __func__, source);
+    }
+}
+
 static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value,
                             unsigned size)
 {
@@ -74,9 +99,11 @@ static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value,
     switch (offset) {
     case AW_A10_PIT_TIMER_IRQ_EN:
         s->irq_enable = value;
+        a10_pit_update_irq(s);
         break;
     case AW_A10_PIT_TIMER_IRQ_ST:
         s->irq_status &= ~value;
+        a10_pit_update_irq(s);
         break;
     case AW_A10_PIT_TIMER_BASE ... AW_A10_PIT_TIMER_BASE_END:
         index = offset & 0xf0;
@@ -85,6 +112,7 @@ static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value,
         switch (offset & 0x0f) {
         case AW_A10_PIT_TIMER_CONTROL:
             s->control[index] = value;
+            a10_pit_set_freq(s, index);
             if (s->control[index] & AW_A10_PIT_TIMER_RELOAD) {
                 ptimer_set_count(s->timer[index], s->interval[index]);
             }
@@ -150,6 +178,14 @@ static const MemoryRegionOps a10_pit_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
+static Property a10_pit_properties[] = {
+    DEFINE_PROP_UINT32("clk0-freq", AwA10PITState, clk_freq[0], 0),
+    DEFINE_PROP_UINT32("clk1-freq", AwA10PITState, clk_freq[1], 0),
+    DEFINE_PROP_UINT32("clk2-freq", AwA10PITState, clk_freq[2], 0),
+    DEFINE_PROP_UINT32("clk3-freq", AwA10PITState, clk_freq[3], 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static const VMStateDescription vmstate_a10_pit = {
     .name = "a10.pit",
     .version_id = 1,
@@ -178,11 +214,14 @@ static void a10_pit_reset(DeviceState *dev)
 
     s->irq_enable = 0;
     s->irq_status = 0;
+    a10_pit_update_irq(s);
+
     for (i = 0; i < 6; i++) {
         s->control[i] = AW_A10_PIT_DEFAULT_CLOCK;
         s->interval[i] = 0;
         s->count[i] = 0;
         ptimer_stop(s->timer[i]);
+        a10_pit_set_freq(s, i);
     }
     s->watch_dog_mode = 0;
     s->watch_dog_control = 0;
@@ -193,18 +232,17 @@ static void a10_pit_reset(DeviceState *dev)
 
 static void a10_pit_timer_cb(void *opaque)
 {
-    AwA10PITState *s = AW_A10_PIT(opaque);
+    AwA10TimerContext *tc = opaque;
-    uint8_t i;
+    AwA10PITState *s = tc->container;
+    uint8_t i = tc->index;
 
-    for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
     if (s->control[i] & AW_A10_PIT_TIMER_EN) {
         s->irq_status |= 1 << i;
         if (s->control[i] & AW_A10_PIT_TIMER_MODE) {
             ptimer_stop(s->timer[i]);
             s->control[i] &= ~AW_A10_PIT_TIMER_EN;
         }
-            qemu_irq_pulse(s->irq[i]);
+        a10_pit_update_irq(s);
-        }
     }
 }
 
@@ -223,9 +261,12 @@ static void a10_pit_init(Object *obj)
     sysbus_init_mmio(sbd, &s->iomem);
 
     for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
-        bh[i] = qemu_bh_new(a10_pit_timer_cb, s);
+        AwA10TimerContext *tc = &s->timer_context[i];
+
+        tc->container = s;
+        tc->index = i;
+        bh[i] = qemu_bh_new(a10_pit_timer_cb, tc);
         s->timer[i] = ptimer_init(bh[i]);
-        ptimer_set_freq(s->timer[i], 240000);
     }
 }
 
@@ -234,6 +275,7 @@ static void a10_pit_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->reset = a10_pit_reset;
+    dc->props = a10_pit_properties;
     dc->desc = "allwinner a10 timer";
     dc->vmsd = &vmstate_a10_pit;
 }

hw/timer/cadence_ttc.c

@@ -346,11 +346,13 @@ static void cadence_ttc_write(void *opaque, hwaddr offset,
     case 0x34:
     case 0x38:
         s->reg_match[0] = value & 0xffff;
+        break;
 
     case 0x3c: /* match register */
     case 0x40:
     case 0x44:
         s->reg_match[1] = value & 0xffff;
+        break;
 
     case 0x48: /* match register */
     case 0x4c:

hw/usb/Makefile.objs

@@ -26,6 +26,10 @@ common-obj-y                          += ccid-card-passthru.o
 common-obj-$(CONFIG_SMARTCARD_NSS)    += ccid-card-emulated.o
 endif
 
+ifeq ($(CONFIG_POSIX),y)
+common-obj-$(CONFIG_USB_STORAGE_MTP)  += dev-mtp.o
+endif
+
 # usb redirection
 common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o
 

hw/usb/desc-msos.c

@@ -44,7 +44,7 @@ typedef struct msos_compat_hdr {
 typedef struct msos_compat_func {
     uint8_t  bFirstInterfaceNumber;
     uint8_t  reserved_1;
-    uint8_t  compatibleId[8];
+    char     compatibleId[8];
     uint8_t  subCompatibleId[8];
     uint8_t  reserved_2[6];
 } QEMU_PACKED msos_compat_func;
@@ -59,6 +59,10 @@ static int usb_desc_msos_compat(const USBDesc *desc, uint8_t *dest)
     func = (void *)(dest + length);
     func->bFirstInterfaceNumber = 0;
     func->reserved_1 = 0x01;
+    if (desc->msos->CompatibleID) {
+        snprintf(func->compatibleId, sizeof(func->compatibleId),
+                 "%s", desc->msos->CompatibleID);
+    }
     length += sizeof(*func);
     count++;
 

hw/usb/desc.h

@@ -184,6 +184,7 @@ struct USBDescOther {
 };
 
 struct USBDescMSOS {
+    const char                *CompatibleID;
     const wchar_t             *Label;
     bool                      SelectiveSuspendEnabled;
 };

include/block/block.h

@@ -180,7 +180,7 @@ int bdrv_create(BlockDriver *drv, const char* filename,
     QEMUOptionParameter *options, Error **errp);
 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
                      Error **errp);
-BlockDriverState *bdrv_new(const char *device_name);
+BlockDriverState *bdrv_new(const char *device_name, Error **errp);
 void bdrv_make_anon(BlockDriverState *bs);
 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old);
 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top);
@@ -429,7 +429,8 @@ bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov);
 
 struct HBitmapIter;
 typedef struct BdrvDirtyBitmap BdrvDirtyBitmap;
-BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity);
+BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
+                                          Error **errp);
 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap);
 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs);
 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector);

include/exec/softmmu_exec.h

@@ -162,3 +162,55 @@
 #define stw(p, v) stw_data(p, v)
 #define stl(p, v) stl_data(p, v)
 #define stq(p, v) stq_data(p, v)
+
+/**
+ * tlb_vaddr_to_host:
+ * @env: CPUArchState
+ * @addr: guest virtual address to look up
+ * @access_type: 0 for read, 1 for write, 2 for execute
+ * @mmu_idx: MMU index to use for lookup
+ *
+ * Look up the specified guest virtual index in the TCG softmmu TLB.
+ * If the TLB contains a host virtual address suitable for direct RAM
+ * access, then return it. Otherwise (TLB miss, TLB entry is for an
+ * I/O access, etc) return NULL.
+ *
+ * This is the equivalent of the initial fast-path code used by
+ * TCG backends for guest load and store accesses.
+ */
+static inline void *tlb_vaddr_to_host(CPUArchState *env, target_ulong addr,
+                                      int access_type, int mmu_idx)
+{
+    int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
+    CPUTLBEntry *tlbentry = &env->tlb_table[mmu_idx][index];
+    target_ulong tlb_addr;
+    uintptr_t haddr;
+
+    switch (access_type) {
+    case 0:
+        tlb_addr = tlbentry->addr_read;
+        break;
+    case 1:
+        tlb_addr = tlbentry->addr_write;
+        break;
+    case 2:
+        tlb_addr = tlbentry->addr_code;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    if ((addr & TARGET_PAGE_MASK)
+        != (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
+        /* TLB entry is for a different page */
+        return NULL;
+    }
+
+    if (tlb_addr & ~TARGET_PAGE_MASK) {
+        /* IO access */
+        return NULL;
+    }
+
+    haddr = addr + env->tlb_table[mmu_idx][index].addend;
+    return (void *)haddr;
+}

include/hw/net/allwinner_emac.h

@@ -144,6 +144,7 @@
 #define MII_BMSR_10T_FD     (1 << 12)
 #define MII_BMSR_10T_HD     (1 << 11)
 #define MII_BMSR_MFPS       (1 << 6)
+#define MII_BMSR_AN_COMP    (1 << 5)
 #define MII_BMSR_AUTONEG    (1 << 3)
 #define MII_BMSR_LINK_ST    (1 << 2)
 

include/hw/timer/allwinner-a10-pit.h

@@ -35,13 +35,22 @@
 
 #define AW_A10_PIT_DEFAULT_CLOCK   0x4
 
-typedef struct AwA10PITState {
+typedef struct AwA10PITState AwA10PITState;
+
+typedef struct AwA10TimerContext {
+    AwA10PITState *container;
+    int index;
+} AwA10TimerContext;
+
+struct AwA10PITState {
     /*< private >*/
     SysBusDevice parent_obj;
     /*< public >*/
     qemu_irq irq[AW_A10_PIT_TIMER_NR];
     ptimer_state * timer[AW_A10_PIT_TIMER_NR];
+    AwA10TimerContext timer_context[AW_A10_PIT_TIMER_NR];
     MemoryRegion iomem;
+    uint32_t clk_freq[4];
 
     uint32_t irq_enable;
     uint32_t irq_status;
@@ -53,6 +62,6 @@ typedef struct AwA10PITState {
     uint32_t count_lo;
     uint32_t count_hi;
     uint32_t count_ctl;
-} AwA10PITState;
+};
 
 #endif

include/monitor/monitor.h

@@ -79,7 +79,6 @@ int monitor_handle_fd_param(Monitor *mon, const char *fdname);
 void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap)
     GCC_FMT_ATTR(2, 0);
 void monitor_printf(Monitor *mon, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
-void monitor_print_filename(Monitor *mon, const char *filename);
 void monitor_flush(Monitor *mon);
 int monitor_set_cpu(int cpu_index);
 int monitor_get_cpu_index(void);

include/qapi/qmp/qerror.h

@@ -12,7 +12,6 @@
 #ifndef QERROR_H
 #define QERROR_H
 
-#include "qapi/qmp/qdict.h"
 #include "qapi/qmp/qstring.h"
 #include "qemu/error-report.h"
 #include "qapi/error.h"
@@ -35,51 +34,30 @@ void qerror_report_err(Error *err);
  * Please keep the definitions in alphabetical order.
  * Use scripts/check-qerror.sh to check.
  */
-#define QERR_ADD_CLIENT_FAILED \
-    ERROR_CLASS_GENERIC_ERROR, "Could not add client"
-
-#define QERR_AMBIGUOUS_PATH \
-    ERROR_CLASS_GENERIC_ERROR, "Path '%s' does not uniquely identify an object"
-
-#define QERR_BAD_BUS_FOR_DEVICE \
-    ERROR_CLASS_GENERIC_ERROR, "Device '%s' can't go on a %s bus"
-
 #define QERR_BASE_NOT_FOUND \
     ERROR_CLASS_GENERIC_ERROR, "Base '%s' not found"
 
 #define QERR_BLOCK_JOB_NOT_ACTIVE \
     ERROR_CLASS_DEVICE_NOT_ACTIVE, "No active block job on device '%s'"
 
-#define QERR_BLOCK_JOB_PAUSED \
-    ERROR_CLASS_GENERIC_ERROR, "The block job for device '%s' is currently paused"
-
 #define QERR_BLOCK_JOB_NOT_READY \
     ERROR_CLASS_GENERIC_ERROR, "The active block job for device '%s' cannot be completed"
 
 #define QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED \
     ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by device '%s' does not support feature '%s'"
 
-#define QERR_BUFFER_OVERRUN \
-    ERROR_CLASS_GENERIC_ERROR, "An internal buffer overran"
-
 #define QERR_BUS_NO_HOTPLUG \
     ERROR_CLASS_GENERIC_ERROR, "Bus '%s' does not support hotplugging"
 
 #define QERR_BUS_NOT_FOUND \
     ERROR_CLASS_GENERIC_ERROR, "Bus '%s' not found"
 
-#define QERR_COMMAND_DISABLED \
-    ERROR_CLASS_GENERIC_ERROR, "The command %s has been disabled for this instance"
-
 #define QERR_COMMAND_NOT_FOUND \
     ERROR_CLASS_COMMAND_NOT_FOUND, "The command %s has not been found"
 
 #define QERR_DEVICE_ENCRYPTED \
     ERROR_CLASS_DEVICE_ENCRYPTED, "'%s' (%s) is encrypted"
 
-#define QERR_DEVICE_FEATURE_BLOCKS_MIGRATION \
-    ERROR_CLASS_GENERIC_ERROR, "Migration is disabled when using feature '%s' in device '%s'"
-
 #define QERR_DEVICE_HAS_NO_MEDIUM \
     ERROR_CLASS_GENERIC_ERROR, "Device '%s' has no medium"
 
@@ -92,15 +70,6 @@ void qerror_report_err(Error *err);
 #define QERR_DEVICE_IS_READ_ONLY \
     ERROR_CLASS_GENERIC_ERROR, "Device '%s' is read only"
 
-#define QERR_DEVICE_LOCKED \
-    ERROR_CLASS_GENERIC_ERROR, "Device '%s' is locked"
-
-#define QERR_DEVICE_MULTIPLE_BUSSES \
-    ERROR_CLASS_GENERIC_ERROR, "Device '%s' has multiple child busses"
-
-#define QERR_DEVICE_NO_BUS \
-    ERROR_CLASS_GENERIC_ERROR, "Device '%s' has no child bus"
-
 #define QERR_DEVICE_NO_HOTPLUG \
     ERROR_CLASS_GENERIC_ERROR, "Device '%s' does not support hotplugging"
 
@@ -113,12 +82,6 @@ void qerror_report_err(Error *err);
 #define QERR_DEVICE_NOT_FOUND \
     ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found"
 
-#define QERR_DEVICE_NOT_REMOVABLE \
-    ERROR_CLASS_GENERIC_ERROR, "Device '%s' is not removable"
-
-#define QERR_DUPLICATE_ID \
-    ERROR_CLASS_GENERIC_ERROR, "Duplicate ID '%s' for %s"
-
 #define QERR_FD_NOT_FOUND \
     ERROR_CLASS_GENERIC_ERROR, "File descriptor named '%s' not found"
 
@@ -131,15 +94,9 @@ void qerror_report_err(Error *err);
 #define QERR_INVALID_BLOCK_FORMAT \
     ERROR_CLASS_GENERIC_ERROR, "Invalid block format '%s'"
 
-#define QERR_INVALID_OPTION_GROUP \
-    ERROR_CLASS_GENERIC_ERROR, "There is no option group '%s'"
-
 #define QERR_INVALID_PARAMETER \
     ERROR_CLASS_GENERIC_ERROR, "Invalid parameter '%s'"
 
-#define QERR_INVALID_PARAMETER_COMBINATION \
-    ERROR_CLASS_GENERIC_ERROR, "Invalid parameter combination"
-
 #define QERR_INVALID_PARAMETER_TYPE \
     ERROR_CLASS_GENERIC_ERROR, "Invalid parameter type for '%s', expected: %s"
 
@@ -152,9 +109,6 @@ void qerror_report_err(Error *err);
 #define QERR_IO_ERROR \
     ERROR_CLASS_GENERIC_ERROR, "An IO error has occurred"
 
-#define QERR_JSON_PARSE_ERROR \
-    ERROR_CLASS_GENERIC_ERROR, "JSON parse error, %s"
-
 #define QERR_JSON_PARSING \
     ERROR_CLASS_GENERIC_ERROR, "Invalid JSON syntax"
 
@@ -164,45 +118,21 @@ void qerror_report_err(Error *err);
 #define QERR_MIGRATION_ACTIVE \
     ERROR_CLASS_GENERIC_ERROR, "There's a migration process in progress"
 
-#define QERR_MIGRATION_NOT_SUPPORTED \
-    ERROR_CLASS_GENERIC_ERROR, "State blocked by non-migratable device '%s'"
-
 #define QERR_MISSING_PARAMETER \
     ERROR_CLASS_GENERIC_ERROR, "Parameter '%s' is missing"
 
-#define QERR_NO_BUS_FOR_DEVICE \
-    ERROR_CLASS_GENERIC_ERROR, "No '%s' bus found for device '%s'"
-
-#define QERR_NOT_SUPPORTED \
-    ERROR_CLASS_GENERIC_ERROR, "Not supported"
-
 #define QERR_PERMISSION_DENIED \
     ERROR_CLASS_GENERIC_ERROR, "Insufficient permission to perform this operation"
 
-#define QERR_PROPERTY_NOT_FOUND \
-    ERROR_CLASS_GENERIC_ERROR, "Property '%s.%s' not found"
-
 #define QERR_PROPERTY_VALUE_BAD \
     ERROR_CLASS_GENERIC_ERROR, "Property '%s.%s' doesn't take value '%s'"
 
-#define QERR_PROPERTY_VALUE_IN_USE \
-    ERROR_CLASS_GENERIC_ERROR, "Property '%s.%s' can't take value '%s', it's in use"
-
-#define QERR_PROPERTY_VALUE_NOT_FOUND \
-    ERROR_CLASS_GENERIC_ERROR, "Property '%s.%s' can't find value '%s'"
-
-#define QERR_PROPERTY_VALUE_NOT_POWER_OF_2 \
-    ERROR_CLASS_GENERIC_ERROR, "Property %s.%s doesn't take value '%" PRId64 "', it's not a power of 2"
-
 #define QERR_PROPERTY_VALUE_OUT_OF_RANGE \
     ERROR_CLASS_GENERIC_ERROR, "Property %s.%s doesn't take value %" PRId64 " (minimum: %" PRId64 ", maximum: %" PRId64 ")"
 
 #define QERR_QGA_COMMAND_FAILED \
     ERROR_CLASS_GENERIC_ERROR, "Guest agent command failed, error was '%s'"
 
-#define QERR_QGA_LOGGING_FAILED \
-    ERROR_CLASS_GENERIC_ERROR, "Guest agent failed to log non-optional log statement"
-
 #define QERR_QMP_BAD_INPUT_OBJECT \
     ERROR_CLASS_GENERIC_ERROR, "Expected '%s' in QMP input"
 
@@ -212,15 +142,9 @@ void qerror_report_err(Error *err);
 #define QERR_QMP_EXTRA_MEMBER \
     ERROR_CLASS_GENERIC_ERROR, "QMP input object member '%s' is unexpected"
 
-#define QERR_RESET_REQUIRED \
-    ERROR_CLASS_GENERIC_ERROR, "Resetting the Virtual Machine is required"
-
 #define QERR_SET_PASSWD_FAILED \
     ERROR_CLASS_GENERIC_ERROR, "Could not set password"
 
-#define QERR_TOO_MANY_FILES \
-    ERROR_CLASS_GENERIC_ERROR, "Too many open files"
-
 #define QERR_UNDEFINED_ERROR \
     ERROR_CLASS_GENERIC_ERROR, "An undefined error has occurred"
 
@@ -230,9 +154,6 @@ void qerror_report_err(Error *err);
 #define QERR_UNSUPPORTED \
     ERROR_CLASS_GENERIC_ERROR, "this feature or command is not currently supported"
 
-#define QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION \
-    ERROR_CLASS_GENERIC_ERROR, "Migration is disabled when VirtFS export path '%s' is mounted in the guest using mount_tag '%s'"
-
 #define QERR_SOCKET_CONNECT_FAILED \
     ERROR_CLASS_GENERIC_ERROR, "Failed to connect to socket"
 

include/qemu/config-file.h

@@ -8,6 +8,8 @@
 
 QemuOptsList *qemu_find_opts(const char *group);
 QemuOptsList *qemu_find_opts_err(const char *group, Error **errp);
+QemuOpts *qemu_find_opts_singleton(const char *group);
+
 void qemu_add_opts(QemuOptsList *list);
 void qemu_add_drive_opts(QemuOptsList *list);
 int qemu_set_option(const char *str);

include/qemu/error-report.h

@@ -37,7 +37,6 @@ void loc_set_file(const char *fname, int lno);
 void error_vprintf(const char *fmt, va_list ap) GCC_FMT_ATTR(1, 0);
 void error_printf(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
 void error_printf_unless_qmp(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
-void error_print_loc(void);
 void error_set_progname(const char *argv0);
 void error_report(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
 const char *error_get_progname(void);

include/qemu/int128.h

@@ -53,7 +53,7 @@ static inline Int128 int128_rshift(Int128 a, int n)
     if (n >= 64) {
         return (Int128) { h, h >> 63 };
     } else {
-        return (Int128) { (a.lo >> n) | (a.hi << (64 - n)), h };
+        return (Int128) { (a.lo >> n) | ((uint64_t)a.hi << (64 - n)), h };
     }
 }
 
@@ -78,7 +78,7 @@ static inline Int128 int128_neg(Int128 a)
 
 static inline Int128 int128_sub(Int128 a, Int128 b)
 {
-    return (Int128){ a.lo - b.lo, a.hi - b.hi - (a.lo < b.lo) };
+    return (Int128){ a.lo - b.lo, (uint64_t)a.hi - b.hi - (a.lo < b.lo) };
 }
 
 static inline bool int128_nonneg(Int128 a)

kvm-all.c

@@ -441,7 +441,7 @@ static int kvm_physical_sync_dirty_bitmap(MemoryRegionSection *section)
 
         d.slot = mem->slot;
 
-        if (kvm_vm_ioctl(s, KVM_GET_DIRTY_LOG, &d) < 0) {
+        if (kvm_vm_ioctl(s, KVM_GET_DIRTY_LOG, &d) == -1) {
             DPRINTF("ioctl failed %d\n", errno);
             ret = -1;
             break;

linux-headers/asm-s390/kvm.h

@@ -22,6 +22,8 @@
 #define KVM_DEV_FLIC_CLEAR_IRQS		3
 #define KVM_DEV_FLIC_APF_ENABLE		4
 #define KVM_DEV_FLIC_APF_DISABLE_WAIT	5
+#define KVM_DEV_FLIC_ADAPTER_REGISTER	6
+#define KVM_DEV_FLIC_ADAPTER_MODIFY	7
 /*
  * We can have up to 4*64k pending subchannels + 8 adapter interrupts,
  * as well as up  to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
@@ -32,6 +34,26 @@
 #define KVM_S390_MAX_FLOAT_IRQS	266250
 #define KVM_S390_FLIC_MAX_BUFFER	0x2000000
 
+struct kvm_s390_io_adapter {
+	__u32 id;
+	__u8 isc;
+	__u8 maskable;
+	__u8 swap;
+	__u8 pad;
+};
+
+#define KVM_S390_IO_ADAPTER_MASK 1
+#define KVM_S390_IO_ADAPTER_MAP 2
+#define KVM_S390_IO_ADAPTER_UNMAP 3
+
+struct kvm_s390_io_adapter_req {
+	__u32 id;
+	__u8 type;
+	__u8 mask;
+	__u16 pad0;
+	__u64 addr;
+};
+
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* general purpose regs for s390 */
@@ -76,4 +98,6 @@ struct kvm_sync_regs {
 #define KVM_REG_S390_PFTOKEN	(KVM_REG_S390 | KVM_REG_SIZE_U64 | 0x5)
 #define KVM_REG_S390_PFCOMPARE	(KVM_REG_S390 | KVM_REG_SIZE_U64 | 0x6)
 #define KVM_REG_S390_PFSELECT	(KVM_REG_S390 | KVM_REG_SIZE_U64 | 0x7)
+#define KVM_REG_S390_PP		(KVM_REG_S390 | KVM_REG_SIZE_U64 | 0x8)
+#define KVM_REG_S390_GBEA	(KVM_REG_S390 | KVM_REG_SIZE_U64 | 0x9)
 #endif

linux-headers/linux/kvm.h

@@ -740,6 +740,9 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_SPAPR_MULTITCE 94
 #define KVM_CAP_EXT_EMUL_CPUID 95
 #define KVM_CAP_HYPERV_TIME 96
+#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97
+#define KVM_CAP_ENABLE_CAP_VM 98
+#define KVM_CAP_S390_IRQCHIP 99
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -755,9 +758,18 @@ struct kvm_irq_routing_msi {
 	__u32 pad;
 };
 
+struct kvm_irq_routing_s390_adapter {
+	__u64 ind_addr;
+	__u64 summary_addr;
+	__u64 ind_offset;
+	__u32 summary_offset;
+	__u32 adapter_id;
+};
+
 /* gsi routing entry types */
 #define KVM_IRQ_ROUTING_IRQCHIP 1
 #define KVM_IRQ_ROUTING_MSI 2
+#define KVM_IRQ_ROUTING_S390_ADAPTER 3
 
 struct kvm_irq_routing_entry {
 	__u32 gsi;
@@ -767,6 +779,7 @@ struct kvm_irq_routing_entry {
 	union {
 		struct kvm_irq_routing_irqchip irqchip;
 		struct kvm_irq_routing_msi msi;
+		struct kvm_irq_routing_s390_adapter adapter;
 		__u32 pad[8];
 	} u;
 };
@@ -1075,6 +1088,10 @@ struct kvm_s390_ucas_mapping {
 /* Available with KVM_CAP_DEBUGREGS */
 #define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
 #define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+/*
+ * vcpu version available with KVM_ENABLE_CAP
+ * vm version available with KVM_CAP_ENABLE_CAP_VM
+ */
 #define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
 /* Available with KVM_CAP_XSAVE */
 #define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)

linux-headers/linux/vfio.h

@@ -23,6 +23,12 @@
 
 #define VFIO_TYPE1_IOMMU		1
 #define VFIO_SPAPR_TCE_IOMMU		2
+#define VFIO_TYPE1v2_IOMMU		3
+/*
+ * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping).  This
+ * capability is subject to change as groups are added or removed.
+ */
+#define VFIO_DMA_CC_IOMMU		4
 
 /*
  * The IOCTL interface is designed for extensibility by embedding the

linux-user/main.c

@@ -483,17 +483,17 @@ static void arm_kernel_cmpxchg64_helper(CPUARMState *env)
     addr = env->regs[2];
 
     if (get_user_u64(oldval, env->regs[0])) {
-        env->cp15.c6_data = env->regs[0];
+        env->exception.vaddress = env->regs[0];
         goto segv;
     };
 
     if (get_user_u64(newval, env->regs[1])) {
-        env->cp15.c6_data = env->regs[1];
+        env->exception.vaddress = env->regs[1];
         goto segv;
     };
 
     if (get_user_u64(val, addr)) {
-        env->cp15.c6_data = addr;
+        env->exception.vaddress = addr;
         goto segv;
     }
 
@@ -501,7 +501,7 @@ static void arm_kernel_cmpxchg64_helper(CPUARMState *env)
         val = newval;
 
         if (put_user_u64(val, addr)) {
-            env->cp15.c6_data = addr;
+            env->exception.vaddress = addr;
             goto segv;
         };
 
@@ -523,7 +523,7 @@ segv:
     info.si_errno = 0;
     /* XXX: check env->error_code */
     info.si_code = TARGET_SEGV_MAPERR;
-    info._sifields._sigfault._addr = env->cp15.c6_data;
+    info._sifields._sigfault._addr = env->exception.vaddress;
     queue_signal(env, info.si_signo, &info);
 
     end_exclusive();
@@ -620,14 +620,14 @@ static int do_strex(CPUARMState *env)
         abort();
     }
     if (segv) {
-        env->cp15.c6_data = addr;
+        env->exception.vaddress = addr;
         goto done;
     }
     if (size == 3) {
         uint32_t valhi;
         segv = get_user_u32(valhi, addr + 4);
         if (segv) {
-            env->cp15.c6_data = addr + 4;
+            env->exception.vaddress = addr + 4;
             goto done;
         }
         val = deposit64(val, 32, 32, valhi);
@@ -650,14 +650,14 @@ static int do_strex(CPUARMState *env)
         break;
     }
     if (segv) {
-        env->cp15.c6_data = addr;
+        env->exception.vaddress = addr;
         goto done;
     }
     if (size == 3) {
         val = env->regs[(env->exclusive_info >> 12) & 0xf];
         segv = put_user_u32(val, addr + 4);
         if (segv) {
-            env->cp15.c6_data = addr + 4;
+            env->exception.vaddress = addr + 4;
             goto done;
         }
     }
@@ -832,12 +832,14 @@ void cpu_loop(CPUARMState *env)
         case EXCP_INTERRUPT:
             /* just indicate that signals should be handled asap */
             break;
+        case EXCP_STREX:
+            if (!do_strex(env)) {
+                break;
+            }
+            /* fall through for segv */
         case EXCP_PREFETCH_ABORT:
-            addr = env->cp15.c6_insn;
-            goto do_segv;
         case EXCP_DATA_ABORT:
-            addr = env->cp15.c6_data;
+            addr = env->exception.vaddress;
-        do_segv:
             {
                 info.si_signo = SIGSEGV;
                 info.si_errno = 0;
@@ -865,12 +867,6 @@ void cpu_loop(CPUARMState *env)
             if (do_kernel_trap(env))
               goto error;
             break;
-        case EXCP_STREX:
-            if (do_strex(env)) {
-                addr = env->cp15.c6_data;
-                goto do_segv;
-            }
-            break;
         default:
         error:
             fprintf(stderr, "qemu: unhandled CPU exception 0x%x - aborting\n",
@@ -933,7 +929,7 @@ static int do_strex_a64(CPUARMState *env)
         abort();
     }
     if (segv) {
-        env->cp15.c6_data = addr;
+        env->exception.vaddress = addr;
         goto error;
     }
     if (val != env->exclusive_val) {
@@ -946,7 +942,7 @@ static int do_strex_a64(CPUARMState *env)
             segv = get_user_u64(val, addr + 8);
         }
         if (segv) {
-            env->cp15.c6_data = addr + (size == 2 ? 4 : 8);
+            env->exception.vaddress = addr + (size == 2 ? 4 : 8);
             goto error;
         }
         if (val != env->exclusive_high) {
@@ -981,7 +977,7 @@ static int do_strex_a64(CPUARMState *env)
             segv = put_user_u64(val, addr + 8);
         }
         if (segv) {
-            env->cp15.c6_data = addr + (size == 2 ? 4 : 8);
+            env->exception.vaddress = addr + (size == 2 ? 4 : 8);
             goto error;
         }
     }
@@ -1037,12 +1033,14 @@ void cpu_loop(CPUARMState *env)
             info._sifields._sigfault._addr = env->pc;
             queue_signal(env, info.si_signo, &info);
             break;
+        case EXCP_STREX:
+            if (!do_strex_a64(env)) {
+                break;
+            }
+            /* fall through for segv */
         case EXCP_PREFETCH_ABORT:
-            addr = env->cp15.c6_insn;
-            goto do_segv;
         case EXCP_DATA_ABORT:
-            addr = env->cp15.c6_data;
+            addr = env->exception.vaddress;
-        do_segv:
             info.si_signo = SIGSEGV;
             info.si_errno = 0;
             /* XXX: check env->error_code */
@@ -1060,12 +1058,6 @@ void cpu_loop(CPUARMState *env)
                 queue_signal(env, info.si_signo, &info);
             }
             break;
-        case EXCP_STREX:
-            if (do_strex_a64(env)) {
-                addr = env->cp15.c6_data;
-                goto do_segv;
-            }
-            break;
         default:
             fprintf(stderr, "qemu: unhandled CPU exception 0x%x - aborting\n",
                     trapnr);

monitor.c

@@ -137,6 +137,7 @@ typedef struct mon_cmd_t {
      * used, and mhandler of 1st level plays the role of help function.
      */
     struct mon_cmd_t *sub_table;
+    void (*command_completion)(ReadLineState *rs, int nb_args, const char *str);
 } mon_cmd_t;
 
 /* file descriptors passed via SCM_RIGHTS */
@@ -352,33 +353,6 @@ void monitor_printf(Monitor *mon, const char *fmt, ...)
     va_end(ap);
 }
 
-void monitor_print_filename(Monitor *mon, const char *filename)
-{
-    int i;
-
-    for (i = 0; filename[i]; i++) {
-        switch (filename[i]) {
-        case ' ':
-        case '"':
-        case '\\':
-            monitor_printf(mon, "\\%c", filename[i]);
-            break;
-        case '\t':
-            monitor_printf(mon, "\\t");
-            break;
-        case '\r':
-            monitor_printf(mon, "\\r");
-            break;
-        case '\n':
-            monitor_printf(mon, "\\n");
-            break;
-        default:
-            monitor_printf(mon, "%c", filename[i]);
-            break;
-        }
-    }
-}
-
 static int GCC_FMT_ATTR(2, 3) monitor_fprintf(FILE *stream,
                                               const char *fmt, ...)
 {
@@ -2254,6 +2228,7 @@ void qmp_getfd(const char *fdname, Error **errp)
     }
 
     if (qemu_isdigit(fdname[0])) {
+        close(fd);
         error_set(errp, QERR_INVALID_PARAMETER_VALUE, "fdname",
                   "a name not starting with a digit");
         return;
@@ -4277,11 +4252,15 @@ static const char *next_arg_type(const char *typestr)
     return (p != NULL ? ++p : typestr);
 }
 
-static void device_add_completion(ReadLineState *rs, const char *str)
+void device_add_completion(ReadLineState *rs, int nb_args, const char *str)
 {
     GSList *list, *elt;
     size_t len;
 
+    if (nb_args != 2) {
+        return;
+    }
+
     len = strlen(str);
     readline_set_completion_index(rs, len);
     list = elt = object_class_get_list(TYPE_DEVICE, false);
@@ -4290,7 +4269,9 @@ static void device_add_completion(ReadLineState *rs, const char *str)
         DeviceClass *dc = OBJECT_CLASS_CHECK(DeviceClass, elt->data,
                                              TYPE_DEVICE);
         name = object_class_get_name(OBJECT_CLASS(dc));
-        if (!strncmp(name, str, len)) {
+
+        if (!dc->cannot_instantiate_with_device_add_yet
+            && !strncmp(name, str, len)) {
             readline_add_completion(rs, name);
         }
         elt = elt->next;
@@ -4298,11 +4279,15 @@ static void device_add_completion(ReadLineState *rs, const char *str)
     g_slist_free(list);
 }
 
-static void object_add_completion(ReadLineState *rs, const char *str)
+void object_add_completion(ReadLineState *rs, int nb_args, const char *str)
 {
     GSList *list, *elt;
     size_t len;
 
+    if (nb_args != 2) {
+        return;
+    }
+
     len = strlen(str);
     readline_set_completion_index(rs, len);
     list = elt = object_class_get_list(TYPE_USER_CREATABLE, false);
@@ -4318,7 +4303,7 @@ static void object_add_completion(ReadLineState *rs, const char *str)
     g_slist_free(list);
 }
 
-static void device_del_completion(ReadLineState *rs, BusState *bus,
+static void device_del_bus_completion(ReadLineState *rs,  BusState *bus,
                                       const char *str, size_t len)
 {
     BusChild *kid;
@@ -4332,16 +4317,32 @@ static void device_del_completion(ReadLineState *rs, BusState *bus,
         }
 
         QLIST_FOREACH(dev_child, &dev->child_bus, sibling) {
-            device_del_completion(rs, dev_child, str, len);
+            device_del_bus_completion(rs, dev_child, str, len);
         }
     }
 }
 
-static void object_del_completion(ReadLineState *rs, const char *str)
+void device_del_completion(ReadLineState *rs, int nb_args, const char *str)
+{
+    size_t len;
+
+    if (nb_args != 2) {
+        return;
+    }
+
+    len = strlen(str);
+    readline_set_completion_index(rs, len);
+    device_del_bus_completion(rs, sysbus_get_default(), str, len);
+}
+
+void object_del_completion(ReadLineState *rs, int nb_args, const char *str)
 {
     ObjectPropertyInfoList *list, *start;
     size_t len;
 
+    if (nb_args != 2) {
+        return;
+    }
     len = strlen(str);
     readline_set_completion_index(rs, len);
 
@@ -4395,6 +4396,9 @@ static void monitor_find_completion_by_table(Monitor *mon,
             return monitor_find_completion_by_table(mon, cmd->sub_table,
                                                     &args[1], nb_args - 1);
         }
+        if (cmd->command_completion) {
+            return cmd->command_completion(mon->rs, nb_args, args[nb_args - 1]);
+        }
 
         ptype = next_arg_type(cmd->args_type);
         for(i = 0; i < nb_args - 2; i++) {
@@ -4421,13 +4425,6 @@ static void monitor_find_completion_by_table(Monitor *mon,
             readline_set_completion_index(mon->rs, strlen(str));
             bdrv_iterate(block_completion_it, &mbs);
             break;
-        case 'O':
-            if (!strcmp(cmd->name, "device_add") && nb_args == 2) {
-                device_add_completion(mon->rs, str);
-            } else if (!strcmp(cmd->name, "object_add") && nb_args == 2) {
-                object_add_completion(mon->rs, str);
-            }
-            break;
         case 's':
         case 'S':
             if (!strcmp(cmd->name, "sendkey")) {
@@ -4441,12 +4438,6 @@ static void monitor_find_completion_by_table(Monitor *mon,
             } else if (!strcmp(cmd->name, "help|?")) {
                 monitor_find_completion_by_table(mon, cmd_table,
                                                  &args[1], nb_args - 1);
-            } else if (!strcmp(cmd->name, "device_del") && nb_args == 2) {
-                size_t len = strlen(str);
-                readline_set_completion_index(mon->rs, len);
-                device_del_completion(mon->rs, sysbus_get_default(), str, len);
-            } else if (!strcmp(cmd->name, "object_del") && nb_args == 2) {
-                object_del_completion(mon->rs, str);
             }
             break;
         default:

net/net.c

@@ -473,7 +473,7 @@ ssize_t qemu_deliver_packet(NetClientState *sender,
 
     if (ret == 0) {
         nc->receive_disabled = 1;
-    };
+    }
 
     return ret;
 }
@@ -952,10 +952,12 @@ void net_host_device_remove(Monitor *mon, const QDict *qdict)
 
     nc = net_hub_find_client_by_name(vlan_id, device);
     if (!nc) {
+        error_report("Host network device '%s' on hub '%d' not found",
+                     device, vlan_id);
         return;
     }
     if (!net_host_check_device(nc->model)) {
-        monitor_printf(mon, "invalid host network device %s\n", device);
+        error_report("invalid host network device '%s'", device);
         return;
     }
     qemu_del_net_client(nc);
@@ -1043,7 +1045,7 @@ RxFilterInfoList *qmp_query_rx_filter(bool has_name, const char *name,
         if (nc->info->type != NET_CLIENT_OPTIONS_KIND_NIC) {
             if (has_name) {
                 error_setg(errp, "net client(%s) isn't a NIC", name);
-                break;
+                return NULL;
             }
             continue;
         }
@@ -1062,11 +1064,15 @@ RxFilterInfoList *qmp_query_rx_filter(bool has_name, const char *name,
         } else if (has_name) {
             error_setg(errp, "net client(%s) doesn't support"
                        " rx-filter querying", name);
+            return NULL;
+        }
+
+        if (has_name) {
             break;
         }
     }
 
-    if (filter_list == NULL && !error_is_set(errp) && has_name) {
+    if (filter_list == NULL && has_name) {
         error_setg(errp, "invalid net client name: %s", name);
     }
 

net/slirp.c

@@ -527,6 +527,7 @@ static int slirp_smb(SlirpState* s, const char *exported_dir,
             "pid directory=%s\n"
             "lock directory=%s\n"
             "state directory=%s\n"
+            "ncalrpc dir=%s/ncalrpc\n"
             "log file=%s/log.smbd\n"
             "smb passwd file=%s/smbpasswd\n"
             "security = user\n"
@@ -542,6 +543,7 @@ static int slirp_smb(SlirpState* s, const char *exported_dir,
             s->smb_dir,
             s->smb_dir,
             s->smb_dir,
+            s->smb_dir,
             exported_dir,
             passwd->pw_name
             );

net/tap.c

@@ -367,11 +367,8 @@ static int launch_script(const char *setup_script, const char *ifname, int fd)
     if (pid == 0) {
         int open_max = sysconf(_SC_OPEN_MAX), i;
 
-        for (i = 0; i < open_max; i++) {
+        for (i = 3; i < open_max; i++) {
-            if (i != STDIN_FILENO &&
+            if (i != fd) {
-                i != STDOUT_FILENO &&
-                i != STDERR_FILENO &&
-                i != fd) {
                 close(i);
             }
         }
@@ -452,11 +449,8 @@ static int net_bridge_run_helper(const char *helper, const char *bridge)
         char br_buf[6+IFNAMSIZ] = {0};
         char helper_cmd[PATH_MAX + sizeof(fd_buf) + sizeof(br_buf) + 15];
 
-        for (i = 0; i < open_max; i++) {
+        for (i = 3; i < open_max; i++) {
-            if (i != STDIN_FILENO &&
+            if (i != sv[1]) {
-                i != STDOUT_FILENO &&
-                i != STDERR_FILENO &&
-                i != sv[1]) {
                 close(i);
             }
         }

po/Makefile

@@ -37,8 +37,8 @@ install: $(OBJS)
 	$(call quiet-command, msgfmt -o $@ $<, "  GEN   $@")
 
 $(PO_PATH)/messages.po: $(SRC_PATH)/ui/gtk.c
-	$(call quiet-command, cd $(SRC_PATH) && \
+	$(call quiet-command, ( cd $(SRC_PATH) && \
-	 (xgettext -o - --from-code=UTF-8 --foreign-user \
+          xgettext -o - --from-code=UTF-8 --foreign-user \
 	    --package-name=QEMU --package-version=$(VERSION) \
 	    --msgid-bugs-address=qemu-devel@nongnu.org -k_ -C ui/gtk.c | \
 	  sed -e s/CHARSET/UTF-8/) >$@, "  GEN   $@")

po/de_DE.po

@@ -10,7 +10,7 @@ msgstr ""
 "PO-Revision-Date: 2012-02-28 16:00+0100\n"
 "Last-Translator: Kevin Wolf <kwolf@redhat.com>\n"
 "Language-Team: Deutsch <de@li.org>\n"
-"Language: \n"
+"Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"

po/fr_FR.po

@@ -10,7 +10,7 @@ msgstr ""
 "PO-Revision-Date: 2013-03-31 19:39+0200\n"
 "Last-Translator: Aurelien Jarno <aurelien@aurel32.net>\n"
 "Language-Team: French <FR@li.org>\n"
-"Language: \n"
+"Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"

po/hu.po

@@ -10,7 +10,7 @@ msgstr ""
 "PO-Revision-Date: 2013-05-06 20:42+0200\n"
 "Last-Translator: Ákos Kovács <akoskovacs@gmx.com>\n"
 "Language-Team: Hungarian <hu@li.org>\n"
-"Language: \n"
+"Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"

po/it.po

@@ -10,7 +10,7 @@ msgstr ""
 "PO-Revision-Date: 2012-02-27 08:23+0100\n"
 "Last-Translator: Paolo Bonzini <pbonzini@redhat.com>\n"
 "Language-Team: Italian <it@li.org>\n"
-"Language: \n"
+"Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"

po/tr.po

@@ -10,7 +10,7 @@ msgstr ""
 "PO-Revision-Date: 2013-04-22 18:35+0300\n"
 "Last-Translator: Ozan Çağlayan <ozancag@gmail.com>\n"
 "Language-Team: Türkçe <>\n"
-"Language: \n"
+"Language: tr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"

qapi-schema.json

@@ -4285,10 +4285,13 @@
 #
 # Drivers that are supported in block device operations.
 #
+# @host_device, @host_cdrom, @host_floppy: Since 2.1
+#
 # Since: 2.0
 ##
 { 'enum': 'BlockdevDriver',
-  'data': [ 'file', 'http', 'https', 'ftp', 'ftps', 'tftp', 'vvfat', 'blkdebug',
+  'data': [ 'file', 'host_device', 'host_cdrom', 'host_floppy',
+            'http', 'https', 'ftp', 'ftps', 'tftp', 'vvfat', 'blkdebug',
             'blkverify', 'bochs', 'cloop', 'cow', 'dmg', 'parallels', 'qcow',
             'qcow2', 'qed', 'raw', 'vdi', 'vhdx', 'vmdk', 'vpc', 'quorum' ] }
 
@@ -4555,6 +4558,9 @@
   'discriminator': 'driver',
   'data': {
       'file':       'BlockdevOptionsFile',
+      'host_device':'BlockdevOptionsFile',
+      'host_cdrom': 'BlockdevOptionsFile',
+      'host_floppy':'BlockdevOptionsFile',
       'http':       'BlockdevOptionsFile',
       'https':      'BlockdevOptionsFile',
       'ftp':        'BlockdevOptionsFile',

qapi/qmp-dispatch.c

@@ -80,7 +80,8 @@ static QObject *do_qmp_dispatch(QObject *request, Error **errp)
         return NULL;
     }
     if (!cmd->enabled) {
-        error_set(errp, QERR_COMMAND_DISABLED, command);
+        error_setg(errp, "The command %s has been disabled for this instance",
+                   command);
         return NULL;
     }
 

qapi/qmp-input-visitor.c

@@ -71,7 +71,7 @@ static void qmp_input_push(QmpInputVisitor *qiv, QObject *obj, Error **errp)
     GHashTable *h;
 
     if (qiv->nb_stack >= QIV_STACK_SIZE) {
-        error_set(errp, QERR_BUFFER_OVERRUN);
+        error_setg(errp, "An internal buffer overran");
         return;
     }
 

qdev-monitor.c

@@ -422,12 +422,14 @@ static BusState *qbus_find(const char *path)
              * one child bus accept it nevertheless */
             switch (dev->num_child_bus) {
             case 0:
-                qerror_report(QERR_DEVICE_NO_BUS, elem);
+                qerror_report(ERROR_CLASS_GENERIC_ERROR,
+                              "Device '%s' has no child bus", elem);
                 return NULL;
             case 1:
                 return QLIST_FIRST(&dev->child_bus);
             default:
-                qerror_report(QERR_DEVICE_MULTIPLE_BUSSES, elem);
+                qerror_report(ERROR_CLASS_GENERIC_ERROR,
+                              "Device '%s' has multiple child busses", elem);
                 if (!monitor_cur_is_qmp()) {
                     qbus_list_bus(dev);
                 }
@@ -505,14 +507,16 @@ DeviceState *qdev_device_add(QemuOpts *opts)
             return NULL;
         }
         if (!object_dynamic_cast(OBJECT(bus), dc->bus_type)) {
-            qerror_report(QERR_BAD_BUS_FOR_DEVICE,
+            qerror_report(ERROR_CLASS_GENERIC_ERROR,
+                          "Device '%s' can't go on a %s bus",
                           driver, object_get_typename(OBJECT(bus)));
             return NULL;
         }
     } else if (dc->bus_type != NULL) {
         bus = qbus_find_recursive(sysbus_get_default(), NULL, dc->bus_type);
         if (!bus) {
-            qerror_report(QERR_NO_BUS_FOR_DEVICE,
+            qerror_report(ERROR_CLASS_GENERIC_ERROR,
+                          "No '%s' bus found for device '%s'",
                           dc->bus_type, driver);
             return NULL;
         }

qemu-doc.texi

@@ -823,7 +823,7 @@ In this case, the block device must be exported using qemu-nbd:
 qemu-nbd --socket=/tmp/my_socket my_disk.qcow2
 @end example
 
-The use of qemu-nbd allows to share a disk between several guests:
+The use of qemu-nbd allows sharing of a disk between several guests:
 @example
 qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2
 @end example

qemu-img.c

@@ -57,8 +57,22 @@ static void format_print(void *opaque, const char *name)
     printf(" %s", name);
 }
 
+static void QEMU_NORETURN GCC_FMT_ATTR(1, 2) error_exit(const char *fmt, ...)
+{
+    va_list ap;
+
+    error_printf("qemu-img: ");
+
+    va_start(ap, fmt);
+    error_vprintf(fmt, ap);
+    va_end(ap);
+
+    error_printf("\nTry 'qemu-img --help' for more information\n");
+    exit(EXIT_FAILURE);
+}
+
 /* Please keep in synch with qemu-img.texi */
-static void help(void)
+static void QEMU_NORETURN help(void)
 {
     const char *help_msg =
            "qemu-img version " QEMU_VERSION ", Copyright (c) 2004-2008 Fabrice Bellard\n"
@@ -129,7 +143,7 @@ static void help(void)
     printf("%s\nSupported formats:", help_msg);
     bdrv_iterate_format(format_print, NULL);
     printf("\n");
-    exit(1);
+    exit(EXIT_SUCCESS);
 }
 
 static int GCC_FMT_ATTR(2, 3) qprintf(bool quiet, const char *fmt, ...)
@@ -262,7 +276,8 @@ static int print_block_option_help(const char *filename, const char *fmt)
     return 0;
 }
 
-static BlockDriverState *bdrv_new_open(const char *filename,
+static BlockDriverState *bdrv_new_open(const char *id,
+                                       const char *filename,
                                        const char *fmt,
                                        int flags,
                                        bool require_io,
@@ -274,7 +289,7 @@ static BlockDriverState *bdrv_new_open(const char *filename,
     Error *local_err = NULL;
     int ret;
 
-    bs = bdrv_new("image");
+    bs = bdrv_new(id, &error_abort);
 
     if (fmt) {
         drv = bdrv_find_format(fmt);
@@ -398,7 +413,7 @@ static int img_create(int argc, char **argv)
     }
 
     if (optind >= argc) {
-        help();
+        error_exit("Expecting image file name");
     }
     optind++;
 
@@ -421,7 +436,7 @@ static int img_create(int argc, char **argv)
         img_size = (uint64_t)sval;
     }
     if (optind != argc) {
-        help();
+        error_exit("Unexpected argument: %s", argv[optind]);
     }
 
     bdrv_img_create(filename, fmt, base_filename, base_fmt,
@@ -442,12 +457,12 @@ fail:
 
 static void dump_json_image_check(ImageCheck *check, bool quiet)
 {
-    Error *errp = NULL;
+    Error *local_err = NULL;
     QString *str;
     QmpOutputVisitor *ov = qmp_output_visitor_new();
     QObject *obj;
     visit_type_ImageCheck(qmp_output_get_visitor(ov),
-                          &check, NULL, &errp);
+                          &check, NULL, &local_err);
     obj = qmp_output_get_qobject(ov);
     str = qobject_to_json_pretty(obj);
     assert(str != NULL);
@@ -590,7 +605,8 @@ static int img_check(int argc, char **argv)
             } else if (!strcmp(optarg, "all")) {
                 fix = BDRV_FIX_LEAKS | BDRV_FIX_ERRORS;
             } else {
-                help();
+                error_exit("Unknown option value for -r "
+                           "(expecting 'leaks' or 'all'): %s", optarg);
             }
             break;
         case OPTION_OUTPUT:
@@ -602,7 +618,7 @@ static int img_check(int argc, char **argv)
         }
     }
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
     filename = argv[optind++];
 
@@ -615,7 +631,7 @@ static int img_check(int argc, char **argv)
         return 1;
     }
 
-    bs = bdrv_new_open(filename, fmt, flags, true, quiet);
+    bs = bdrv_new_open("image", filename, fmt, flags, true, quiet);
     if (!bs) {
         return 1;
     }
@@ -713,7 +729,7 @@ static int img_commit(int argc, char **argv)
         }
     }
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
     filename = argv[optind++];
 
@@ -724,7 +740,7 @@ static int img_commit(int argc, char **argv)
         return -1;
     }
 
-    bs = bdrv_new_open(filename, fmt, flags, true, quiet);
+    bs = bdrv_new_open("image", filename, fmt, flags, true, quiet);
     if (!bs) {
         return 1;
     }
@@ -959,7 +975,7 @@ static int img_compare(int argc, char **argv)
 
 
     if (optind != argc - 2) {
-        help();
+        error_exit("Expecting two image file names");
     }
     filename1 = argv[optind++];
     filename2 = argv[optind++];
@@ -967,14 +983,14 @@ static int img_compare(int argc, char **argv)
     /* Initialize before goto out */
     qemu_progress_init(progress, 2.0);
 
-    bs1 = bdrv_new_open(filename1, fmt1, BDRV_O_FLAGS, true, quiet);
+    bs1 = bdrv_new_open("image 1", filename1, fmt1, BDRV_O_FLAGS, true, quiet);
     if (!bs1) {
         error_report("Can't open file %s", filename1);
         ret = 2;
         goto out3;
     }
 
-    bs2 = bdrv_new_open(filename2, fmt2, BDRV_O_FLAGS, true, quiet);
+    bs2 = bdrv_new_open("image 2", filename2, fmt2, BDRV_O_FLAGS, true, quiet);
     if (!bs2) {
         error_report("Can't open file %s", filename2);
         ret = 2;
@@ -1275,7 +1291,7 @@ static int img_convert(int argc, char **argv)
     }
 
     if (bs_n < 1) {
-        help();
+        error_exit("Must specify image file name");
     }
 
 
@@ -1292,8 +1308,11 @@ static int img_convert(int argc, char **argv)
 
     total_sectors = 0;
     for (bs_i = 0; bs_i < bs_n; bs_i++) {
-        bs[bs_i] = bdrv_new_open(argv[optind + bs_i], fmt, BDRV_O_FLAGS, true,
+        char *id = bs_n > 1 ? g_strdup_printf("source %d", bs_i)
-                                 quiet);
+                            : g_strdup("source");
+        bs[bs_i] = bdrv_new_open(id, argv[optind + bs_i], fmt, BDRV_O_FLAGS,
+                                 true, quiet);
+        g_free(id);
         if (!bs[bs_i]) {
             error_report("Could not open '%s'", argv[optind + bs_i]);
             ret = -1;
@@ -1416,7 +1435,7 @@ static int img_convert(int argc, char **argv)
         return -1;
     }
 
-    out_bs = bdrv_new_open(out_filename, out_fmt, flags, true, quiet);
+    out_bs = bdrv_new_open("target", out_filename, out_fmt, flags, true, quiet);
     if (!out_bs) {
         ret = -1;
         goto out;
@@ -1712,12 +1731,12 @@ static void dump_snapshots(BlockDriverState *bs)
 
 static void dump_json_image_info_list(ImageInfoList *list)
 {
-    Error *errp = NULL;
+    Error *local_err = NULL;
     QString *str;
     QmpOutputVisitor *ov = qmp_output_visitor_new();
     QObject *obj;
     visit_type_ImageInfoList(qmp_output_get_visitor(ov),
-                             &list, NULL, &errp);
+                             &list, NULL, &local_err);
     obj = qmp_output_get_qobject(ov);
     str = qobject_to_json_pretty(obj);
     assert(str != NULL);
@@ -1729,12 +1748,12 @@ static void dump_json_image_info_list(ImageInfoList *list)
 
 static void dump_json_image_info(ImageInfo *info)
 {
-    Error *errp = NULL;
+    Error *local_err = NULL;
     QString *str;
     QmpOutputVisitor *ov = qmp_output_visitor_new();
     QObject *obj;
     visit_type_ImageInfo(qmp_output_get_visitor(ov),
-                         &info, NULL, &errp);
+                         &info, NULL, &local_err);
     obj = qmp_output_get_qobject(ov);
     str = qobject_to_json_pretty(obj);
     assert(str != NULL);
@@ -1799,8 +1818,8 @@ static ImageInfoList *collect_image_info_list(const char *filename,
         }
         g_hash_table_insert(filenames, (gpointer)filename, NULL);
 
-        bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_NO_BACKING,
+        bs = bdrv_new_open("image", filename, fmt,
-                           false, false);
+                           BDRV_O_FLAGS | BDRV_O_NO_BACKING, false, false);
         if (!bs) {
             goto err;
         }
@@ -1882,7 +1901,7 @@ static int img_info(int argc, char **argv)
         }
     }
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
     filename = argv[optind++];
 
@@ -2046,10 +2065,10 @@ static int img_map(int argc, char **argv)
             break;
         }
     }
-    if (optind >= argc) {
+    if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
-    filename = argv[optind++];
+    filename = argv[optind];
 
     if (output && !strcmp(output, "json")) {
         output_format = OFORMAT_JSON;
@@ -2060,7 +2079,7 @@ static int img_map(int argc, char **argv)
         return 1;
     }
 
-    bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS, true, false);
+    bs = bdrv_new_open("image", filename, fmt, BDRV_O_FLAGS, true, false);
     if (!bs) {
         return 1;
     }
@@ -2138,7 +2157,7 @@ static int img_snapshot(int argc, char **argv)
             return 0;
         case 'l':
             if (action) {
-                help();
+                error_exit("Cannot mix '-l', '-a', '-c', '-d'");
                 return 0;
             }
             action = SNAPSHOT_LIST;
@@ -2146,7 +2165,7 @@ static int img_snapshot(int argc, char **argv)
             break;
         case 'a':
             if (action) {
-                help();
+                error_exit("Cannot mix '-l', '-a', '-c', '-d'");
                 return 0;
             }
             action = SNAPSHOT_APPLY;
@@ -2154,7 +2173,7 @@ static int img_snapshot(int argc, char **argv)
             break;
         case 'c':
             if (action) {
-                help();
+                error_exit("Cannot mix '-l', '-a', '-c', '-d'");
                 return 0;
             }
             action = SNAPSHOT_CREATE;
@@ -2162,7 +2181,7 @@ static int img_snapshot(int argc, char **argv)
             break;
         case 'd':
             if (action) {
-                help();
+                error_exit("Cannot mix '-l', '-a', '-c', '-d'");
                 return 0;
             }
             action = SNAPSHOT_DELETE;
@@ -2175,12 +2194,12 @@ static int img_snapshot(int argc, char **argv)
     }
 
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
     filename = argv[optind++];
 
     /* Open the image */
-    bs = bdrv_new_open(filename, NULL, bdrv_oflags, true, quiet);
+    bs = bdrv_new_open("image", filename, NULL, bdrv_oflags, true, quiet);
     if (!bs) {
         return 1;
     }
@@ -2288,8 +2307,11 @@ static int img_rebase(int argc, char **argv)
         progress = 0;
     }
 
-    if ((optind != argc - 1) || (!unsafe && !out_baseimg)) {
+    if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
+    }
+    if (!unsafe && !out_baseimg) {
+        error_exit("Must specify backing file (-b) or use unsafe mode (-u)");
     }
     filename = argv[optind++];
 
@@ -2309,7 +2331,7 @@ static int img_rebase(int argc, char **argv)
      * Ignore the old backing file for unsafe rebase in case we want to correct
      * the reference to a renamed or moved backing file.
      */
-    bs = bdrv_new_open(filename, fmt, flags, true, quiet);
+    bs = bdrv_new_open("image", filename, fmt, flags, true, quiet);
     if (!bs) {
         return 1;
     }
@@ -2344,7 +2366,7 @@ static int img_rebase(int argc, char **argv)
     } else {
         char backing_name[1024];
 
-        bs_old_backing = bdrv_new("old_backing");
+        bs_old_backing = bdrv_new("old_backing", &error_abort);
         bdrv_get_backing_filename(bs, backing_name, sizeof(backing_name));
         ret = bdrv_open(&bs_old_backing, backing_name, NULL, NULL, BDRV_O_FLAGS,
                         old_backing_drv, &local_err);
@@ -2355,7 +2377,7 @@ static int img_rebase(int argc, char **argv)
             goto out;
         }
         if (out_baseimg[0]) {
-            bs_new_backing = bdrv_new("new_backing");
+            bs_new_backing = bdrv_new("new_backing", &error_abort);
             ret = bdrv_open(&bs_new_backing, out_baseimg, NULL, NULL,
                             BDRV_O_FLAGS, new_backing_drv, &local_err);
             if (ret) {
@@ -2549,7 +2571,7 @@ static int img_resize(int argc, char **argv)
     /* Remove size from argv manually so that negative numbers are not treated
      * as options by getopt. */
     if (argc < 3) {
-        help();
+        error_exit("Not enough arguments");
         return 1;
     }
 
@@ -2576,7 +2598,7 @@ static int img_resize(int argc, char **argv)
         }
     }
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
     filename = argv[optind++];
 
@@ -2606,7 +2628,8 @@ static int img_resize(int argc, char **argv)
     n = qemu_opt_get_size(param, BLOCK_OPT_SIZE, 0);
     qemu_opts_del(param);
 
-    bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_RDWR, true, quiet);
+    bs = bdrv_new_open("image", filename, fmt, BDRV_O_FLAGS | BDRV_O_RDWR,
+                       true, quiet);
     if (!bs) {
         ret = -1;
         goto out;
@@ -2692,7 +2715,7 @@ static int img_amend(int argc, char **argv)
     }
 
     if (!options) {
-        help();
+        error_exit("Must specify options (-o)");
     }
 
     filename = (optind == argc - 1) ? argv[argc - 1] : NULL;
@@ -2704,10 +2727,11 @@ static int img_amend(int argc, char **argv)
     }
 
     if (optind != argc - 1) {
-        help();
+        error_exit("Expecting one image file name");
     }
 
-    bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_RDWR, true, quiet);
+    bs = bdrv_new_open("image", filename, fmt,
+                       BDRV_O_FLAGS | BDRV_O_RDWR, true, quiet);
     if (!bs) {
         error_report("Could not open image '%s'", filename);
         ret = -1;
@@ -2775,8 +2799,9 @@ int main(int argc, char **argv)
 
     qemu_init_main_loop();
     bdrv_init();
-    if (argc < 2)
+    if (argc < 2) {
-        help();
+        error_exit("Not enough arguments");
+    }
     cmdname = argv[1];
     argc--; argv++;
 
@@ -2788,6 +2813,5 @@ int main(int argc, char **argv)
     }
 
     /* not found */
-    help();
+    error_exit("Command not found: %s", cmdname);
-    return 0;
 }

qemu-io.c

@@ -67,7 +67,7 @@ static int openfile(char *name, int flags, int growable, QDict *opts)
             return 1;
         }
     } else {
-        qemuio_bs = bdrv_new("hda");
+        qemuio_bs = bdrv_new("hda", &error_abort);
 
         if (bdrv_open(&qemuio_bs, name, NULL, opts, flags, NULL, &local_err)
             < 0)

qemu-nbd.c

@@ -657,7 +657,8 @@ int main(int argc, char **argv)
         drv = NULL;
     }
 
-    bs = bdrv_new("hda");
+    bs = bdrv_new("hda", &error_abort);
+
     srcpath = argv[optind];
     ret = bdrv_open(&bs, srcpath, NULL, NULL, flags, drv, &local_err);
     if (ret < 0) {

qemu-options.hx

@@ -210,10 +210,13 @@ use is discouraged as it may be removed from future versions.
 ETEXI
 
 DEF("m", HAS_ARG, QEMU_OPTION_m,
-    "-m megs         set virtual RAM size to megs MB [default="
+    "-m [size=]megs\n"
-    stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL)
+    "                configure guest RAM\n"
+    "                size: initial amount of guest memory (default: "
+    stringify(DEFAULT_RAM_SIZE) "MiB)\n",
+    QEMU_ARCH_ALL)
 STEXI
-@item -m @var{megs}
+@item -m [size=]@var{megs}
 @findex -m
 Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB.  Optionally,
 a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
@@ -408,7 +411,8 @@ DEF("drive", HAS_ARG, QEMU_OPTION_drive,
     "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
     "       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
     "       [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
-    "       [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
+    "       [,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
+    "       [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n"
     "       [,readonly=on|off][,copy-on-read=on|off]\n"
     "       [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n"
     "       [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n"
@@ -444,7 +448,8 @@ This option defines the type of the media: disk or cdrom.
 @item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
 These options have the same definition as they have in @option{-hdachs}.
 @item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
+@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
+(see @option{-snapshot}).
 @item cache=@var{cache}
 @var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
 @item aio=@var{aio}
@@ -1242,7 +1247,7 @@ Disable adaptive encodings. Adaptive encodings are enabled by default.
 An adaptive encoding will try to detect frequently updated screen regions,
 and send updates in these regions using a lossy encoding (like JPEG).
 This can be really helpful to save bandwidth when playing videos. Disabling
-adaptive encodings allows to restore the original static behavior of encodings
+adaptive encodings restores the original static behavior of encodings
 like Tight.
 
 @item share=[allow-exclusive|force-shared|ignore]
@@ -2805,7 +2810,7 @@ UTC or local time, respectively. @code{localtime} is required for correct date i
 MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
 format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
 
-By default the RTC is driven by the host system time. This allows to use the
+By default the RTC is driven by the host system time. This allows using of the
 RTC as accurate reference clock inside the guest, specifically if the host
 time is smoothly following an accurate external reference clock, e.g. via NTP.
 If you want to isolate the guest time from the host, you can set @option{clock}

qemu-seccomp.c

@@ -143,6 +143,7 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(getsockname), 242 },
     { SCMP_SYS(getpeername), 242 },
     { SCMP_SYS(accept4), 242 },
+    { SCMP_SYS(timerfd_settime), 242 },
     { SCMP_SYS(newfstatat), 241 },
     { SCMP_SYS(shutdown), 241 },
     { SCMP_SYS(getsockopt), 241 },
@@ -225,7 +226,11 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(fchmod), 240 },
     { SCMP_SYS(shmget), 240 },
     { SCMP_SYS(shmat), 240 },
-    { SCMP_SYS(shmdt), 240 }
+    { SCMP_SYS(shmdt), 240 },
+    { SCMP_SYS(timerfd_create), 240 },
+    { SCMP_SYS(shmctl), 240 },
+    { SCMP_SYS(mlock), 240 },
+    { SCMP_SYS(munlock), 240 }
 };
 
 int seccomp_start(void)

qga/commands-posix.c

@@ -171,7 +171,7 @@ void qmp_guest_set_time(bool has_time, int64_t time_ns, Error **errp)
     /* Now, if user has passed a time to set and the system time is set, we
      * just need to synchronize the hardware clock. However, if no time was
      * passed, user is requesting the opposite: set the system time from the
-     * hardware clock. */
+     * hardware clock (RTC). */
     pid = fork();
     if (pid == 0) {
         setsid();

qga/qapi-schema.json

@@ -96,8 +96,8 @@
 ##
 # @guest-get-time:
 #
-# Get the information about guest time relative to the Epoch
+# Get the information about guest's System Time relative to
-# of 1970-01-01 in UTC.
+# the Epoch of 1970-01-01 in UTC.
 #
 # Returns: Time in nanoseconds.
 #
@@ -117,11 +117,11 @@
 # gap was, NTP might not be able to resynchronize the
 # guest.
 #
-# This command tries to set guest time to the given value,
+# This command tries to set guest's System Time to the
-# then sets the Hardware Clock to the current System Time.
+# given value, then sets the Hardware Clock (RTC) to the
-# This will make it easier for a guest to resynchronize
+# current System Time. This will make it easier for a guest
-# without waiting for NTP. If no @time is specified, then
+# to resynchronize without waiting for NTP. If no @time is
-# the time to set is read from RTC.
+# specified, then the time to set is read from RTC.
 #
 # @time: #optional time of nanoseconds, relative to the Epoch
 #        of 1970-01-01 in UTC.

qmp.c

@@ -166,7 +166,7 @@ void qmp_cont(Error **errp)
     Error *local_err = NULL;
 
     if (runstate_needs_reset()) {
-        error_set(errp, QERR_RESET_REQUIRED);
+        error_setg(errp, "Resetting the Virtual Machine is required");
         return;
     } else if (runstate_check(RUN_STATE_SUSPENDED)) {
         return;
@@ -540,14 +540,27 @@ void object_add(const char *type, const char *id, const QDict *qdict,
                 Visitor *v, Error **errp)
 {
     Object *obj;
+    ObjectClass *klass;
     const QDictEntry *e;
     Error *local_err = NULL;
 
-    if (!object_class_by_name(type)) {
+    klass = object_class_by_name(type);
+    if (!klass) {
         error_setg(errp, "invalid class name");
         return;
     }
 
+    if (!object_class_dynamic_cast(klass, TYPE_USER_CREATABLE)) {
+        error_setg(errp, "object type '%s' isn't supported by object-add",
+                   type);
+        return;
+    }
+
+    if (object_class_is_abstract(klass)) {
+        error_setg(errp, "object type '%s' is abstract", type);
+        return;
+    }
+
     obj = object_new(type);
     if (qdict) {
         for (e = qdict_first(qdict); e; e = qdict_next(qdict, e)) {
@@ -558,12 +571,6 @@ void object_add(const char *type, const char *id, const QDict *qdict,
         }
     }
 
-    if (!object_dynamic_cast(obj, TYPE_USER_CREATABLE)) {
-        error_setg(&local_err, "object type '%s' isn't supported by object-add",
-                   type);
-        goto out;
-    }
-
     user_creatable_complete(obj, &local_err);
     if (local_err) {
         goto out;

qobject/json-parser.c

@@ -110,7 +110,7 @@ static void GCC_FMT_ATTR(3, 4) parse_error(JSONParserContext *ctxt,
         error_free(ctxt->err);
         ctxt->err = NULL;
     }
-    error_set(&ctxt->err, QERR_JSON_PARSE_ERROR, message);
+    error_setg(&ctxt->err, "JSON parse error, %s", message);
 }
 
 /**

qom/object.c

@@ -768,7 +768,7 @@ ObjectProperty *object_property_find(Object *obj, const char *name,
         }
     }
 
-    error_set(errp, QERR_PROPERTY_NOT_FOUND, "", name);
+    error_setg(errp, "Property '.%s' not found", name);
     return NULL;
 }
 
@@ -1075,7 +1075,8 @@ static Object *object_resolve_link(Object *obj, const char *name,
     target = object_resolve_path_type(path, target_type, &ambiguous);
 
     if (ambiguous) {
-        error_set(errp, QERR_AMBIGUOUS_PATH, path);
+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
+                  "Path '%s' does not uniquely identify an object", path);
     } else if (!target) {
         target = object_resolve_path(path, &ambiguous);
         if (target || ambiguous) {
@@ -1225,7 +1226,8 @@ Object *object_resolve_path_component(Object *parent, const gchar *part)
     }
 
     if (object_property_is_link(prop)) {
-        return *(Object **)prop->opaque;
+        LinkProperty *lprop = prop->opaque;
+        return *lprop->child;
     } else if (object_property_is_child(prop)) {
         return prop->opaque;
     } else {

savevm.c

@@ -453,7 +453,8 @@ bool qemu_savevm_state_blocked(Error **errp)
 
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (se->no_migrate) {
-            error_set(errp, QERR_MIGRATION_NOT_SUPPORTED, se->idstr);
+            error_setg(errp, "State blocked by non-migratable device '%s'",
+                       se->idstr);
             return true;
         }
     }

scripts/coverity-model.c

@@ -0,0 +1,183 @@
+/* Coverity Scan model
+ *
+ * Copyright (C) 2014 Red Hat, Inc.
+ *
+ * Authors:
+ *  Markus Armbruster <armbru@redhat.com>
+ *  Paolo Bonzini <pbonzini@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or, at your
+ * option, any later version.  See the COPYING file in the top-level directory.
+ */
+
+
+/*
+ * This is the source code for our Coverity user model file.  The
+ * purpose of user models is to increase scanning accuracy by explaining
+ * code Coverity can't see (out of tree libraries) or doesn't
+ * sufficiently understand.  Better accuracy means both fewer false
+ * positives and more true defects.  Memory leaks in particular.
+ *
+ * - A model file can't import any header files.  Some built-in primitives are
+ *   available but not wchar_t, NULL etc.
+ * - Modeling doesn't need full structs and typedefs. Rudimentary structs
+ *   and similar types are sufficient.
+ * - An uninitialized local variable signifies that the variable could be
+ *   any value.
+ *
+ * The model file must be uploaded by an admin in the analysis settings of
+ * http://scan.coverity.com/projects/378
+ */
+
+#define NULL ((void *)0)
+
+typedef unsigned char uint8_t;
+typedef char int8_t;
+typedef unsigned int uint32_t;
+typedef int int32_t;
+typedef long ssize_t;
+typedef unsigned long long uint64_t;
+typedef long long int64_t;
+typedef _Bool bool;
+
+/* exec.c */
+
+typedef struct AddressSpace AddressSpace;
+typedef uint64_t hwaddr;
+
+static void __write(uint8_t *buf, ssize_t len)
+{
+    int first, last;
+    __coverity_negative_sink__(len);
+    if (len == 0) return;
+    buf[0] = first;
+    buf[len-1] = last;
+    __coverity_writeall__(buf);
+}
+
+static void __read(uint8_t *buf, ssize_t len)
+{
+    __coverity_negative_sink__(len);
+    if (len == 0) return;
+    int first = buf[0];
+    int last = buf[len-1];
+}
+
+bool address_space_rw(AddressSpace *as, hwaddr addr, uint8_t *buf,
+                      int len, bool is_write)
+{
+    bool result;
+
+    // TODO: investigate impact of treating reads as producing
+    // tainted data, with __coverity_tainted_data_argument__(buf).
+    if (is_write) __write(buf, len); else __read(buf, len);
+
+    return result;
+}
+
+/* Tainting */
+
+typedef struct {} name2keysym_t;
+static int get_keysym(const name2keysym_t *table,
+                      const char *name)
+{
+    int result;
+    if (result > 0) {
+        __coverity_tainted_string_sanitize_content__(name);
+        return result;
+    } else {
+        return 0;
+    }
+}
+
+/* glib memory allocation functions.
+ *
+ * Note that we ignore the fact that g_malloc of 0 bytes returns NULL,
+ * and g_realloc of 0 bytes frees the pointer.
+ *
+ * Modeling this would result in Coverity flagging a lot of memory
+ * allocations as potentially returning NULL, and asking us to check
+ * whether the result of the allocation is NULL or not.  However, the
+ * resulting pointer should never be dereferenced anyway, and in fact
+ * it is not in the vast majority of cases.
+ *
+ * If a dereference did happen, this would suppress a defect report
+ * for an actual null pointer dereference.  But it's too unlikely to
+ * be worth wading through the false positives, and with some luck
+ * we'll get a buffer overflow reported anyway.
+ */
+
+void *malloc(size_t);
+void *calloc(size_t, size_t);
+void *realloc(void *, size_t);
+void free(void *);
+
+void *
+g_malloc(size_t n_bytes)
+{
+    void *mem;
+    __coverity_negative_sink__(n_bytes);
+    mem = malloc(n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void *
+g_malloc0(size_t n_bytes)
+{
+    void *mem;
+    __coverity_negative_sink__(n_bytes);
+    mem = calloc(1, n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void g_free(void *mem)
+{
+    free(mem);
+}
+
+void *g_realloc(void * mem, size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    mem = realloc(mem, n_bytes == 0 ? 1 : n_bytes);
+    if (!mem) __coverity_panic__();
+    return mem;
+}
+
+void *g_try_malloc(size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return malloc(n_bytes == 0 ? 1 : n_bytes);
+}
+
+void *g_try_malloc0(size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return calloc(1, n_bytes == 0 ? 1 : n_bytes);
+}
+
+void *g_try_realloc(void *mem, size_t n_bytes)
+{
+    __coverity_negative_sink__(n_bytes);
+    return realloc(mem, n_bytes == 0 ? 1 : n_bytes);
+}
+
+/* Other glib functions */
+
+typedef struct _GIOChannel GIOChannel;
+GIOChannel *g_io_channel_unix_new(int fd)
+{
+    GIOChannel *c = g_malloc0(sizeof(GIOChannel));
+    __coverity_escape__(fd);
+    return c;
+}
+
+void g_assertion_message_expr(const char     *domain,
+                              const char     *file,
+                              int             line,
+                              const char     *func,
+                              const char     *expr)
+{
+    __coverity_panic__();
+}

slirp/misc.c

@@ -136,7 +136,7 @@ fork_exec(struct socket *so, const char *ex, int do_pty)
 		if ((s = qemu_socket(AF_INET, SOCK_STREAM, 0)) < 0 ||
 		    bind(s, (struct sockaddr *)&addr, addrlen) < 0 ||
 		    listen(s, 1) < 0) {
-			lprint("Error: inet socket: %s\n", strerror(errno));
+			error_report("Error: inet socket: %s", strerror(errno));
 			closesocket(s);
 
 			return 0;
@@ -146,7 +146,7 @@ fork_exec(struct socket *so, const char *ex, int do_pty)
 	pid = fork();
 	switch(pid) {
 	 case -1:
-		lprint("Error: fork failed: %s\n", strerror(errno));
+		error_report("Error: fork failed: %s", strerror(errno));
 		close(s);
 		return 0;
 
@@ -242,15 +242,6 @@ strdup(str)
 }
 #endif
 
-void lprint(const char *format, ...)
-{
-    va_list args;
-
-    va_start(args, format);
-    monitor_vprintf(default_mon, format, args);
-    va_end(args);
-}
-
 void slirp_connection_info(Slirp *slirp, Monitor *mon)
 {
     const char * const tcpstates[] = {

slirp/slirp.c

@@ -139,7 +139,7 @@ int get_dns_addr(struct in_addr *pdns_addr)
         return -1;
 
 #ifdef DEBUG
-    lprint("IP address of your DNS(s): ");
+    fprintf(stderr, "IP address of your DNS(s): ");
 #endif
     while (fgets(buff, 512, f) != NULL) {
         if (sscanf(buff, "nameserver%*[ \t]%256s", buff2) == 1) {
@@ -153,17 +153,17 @@ int get_dns_addr(struct in_addr *pdns_addr)
             }
 #ifdef DEBUG
             else
-                lprint(", ");
+                fprintf(stderr, ", ");
 #endif
             if (++found > 3) {
 #ifdef DEBUG
-                lprint("(more)");
+                fprintf(stderr, "(more)");
 #endif
                 break;
             }
 #ifdef DEBUG
             else
-                lprint("%s", inet_ntoa(tmp_addr));
+                fprintf(stderr, "%s", inet_ntoa(tmp_addr));
 #endif
         }
     }

slirp/slirp.h

@@ -287,8 +287,6 @@ void if_start(struct ttys *);
  long gethostid(void);
 #endif
 
-void lprint(const char *, ...) GCC_FMT_ATTR(1, 2);
-
 #ifndef _WIN32
 #include <netdb.h>
 #endif