a8170e5e97
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
648 lines
17 KiB
C
648 lines
17 KiB
C
/*
|
|
* Arm PrimeCell PL041 Advanced Audio Codec Interface
|
|
*
|
|
* Copyright (c) 2011
|
|
* Written by Mathieu Sonet - www.elasticsheep.com
|
|
*
|
|
* This code is licensed under the GPL.
|
|
*
|
|
* *****************************************************************
|
|
*
|
|
* This driver emulates the ARM AACI interface
|
|
* connected to a LM4549 codec.
|
|
*
|
|
* Limitations:
|
|
* - Supports only a playback on one channel (Versatile/Vexpress)
|
|
* - Supports only one TX FIFO in compact-mode or non-compact mode.
|
|
* - Supports playback of 12, 16, 18 and 20 bits samples.
|
|
* - Record is not supported.
|
|
* - The PL041 is hardwired to a LM4549 codec.
|
|
*
|
|
*/
|
|
|
|
#include "sysbus.h"
|
|
|
|
#include "pl041.h"
|
|
#include "lm4549.h"
|
|
|
|
#if 0
|
|
#define PL041_DEBUG_LEVEL 1
|
|
#endif
|
|
|
|
#if defined(PL041_DEBUG_LEVEL) && (PL041_DEBUG_LEVEL >= 1)
|
|
#define DBG_L1(fmt, ...) \
|
|
do { printf("pl041: " fmt , ## __VA_ARGS__); } while (0)
|
|
#else
|
|
#define DBG_L1(fmt, ...) \
|
|
do { } while (0)
|
|
#endif
|
|
|
|
#if defined(PL041_DEBUG_LEVEL) && (PL041_DEBUG_LEVEL >= 2)
|
|
#define DBG_L2(fmt, ...) \
|
|
do { printf("pl041: " fmt , ## __VA_ARGS__); } while (0)
|
|
#else
|
|
#define DBG_L2(fmt, ...) \
|
|
do { } while (0)
|
|
#endif
|
|
|
|
|
|
#define MAX_FIFO_DEPTH (1024)
|
|
#define DEFAULT_FIFO_DEPTH (8)
|
|
|
|
#define SLOT1_RW (1 << 19)
|
|
|
|
/* This FIFO only stores 20-bit samples on 32-bit words.
|
|
So its level is independent of the selected mode */
|
|
typedef struct {
|
|
uint32_t level;
|
|
uint32_t data[MAX_FIFO_DEPTH];
|
|
} pl041_fifo;
|
|
|
|
typedef struct {
|
|
pl041_fifo tx_fifo;
|
|
uint8_t tx_enabled;
|
|
uint8_t tx_compact_mode;
|
|
uint8_t tx_sample_size;
|
|
|
|
pl041_fifo rx_fifo;
|
|
uint8_t rx_enabled;
|
|
uint8_t rx_compact_mode;
|
|
uint8_t rx_sample_size;
|
|
} pl041_channel;
|
|
|
|
typedef struct {
|
|
SysBusDevice busdev;
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
|
|
uint32_t fifo_depth; /* FIFO depth in non-compact mode */
|
|
|
|
pl041_regfile regs;
|
|
pl041_channel fifo1;
|
|
lm4549_state codec;
|
|
} pl041_state;
|
|
|
|
|
|
static const unsigned char pl041_default_id[8] = {
|
|
0x41, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1
|
|
};
|
|
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
#define REGISTER(name, offset) #name,
|
|
static const char *pl041_regs_name[] = {
|
|
#include "pl041.hx"
|
|
};
|
|
#undef REGISTER
|
|
#endif
|
|
|
|
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
static const char *get_reg_name(hwaddr offset)
|
|
{
|
|
if (offset <= PL041_dr1_7) {
|
|
return pl041_regs_name[offset >> 2];
|
|
}
|
|
|
|
return "unknown";
|
|
}
|
|
#endif
|
|
|
|
static uint8_t pl041_compute_periphid3(pl041_state *s)
|
|
{
|
|
uint8_t id3 = 1; /* One channel */
|
|
|
|
/* Add the fifo depth information */
|
|
switch (s->fifo_depth) {
|
|
case 8:
|
|
id3 |= 0 << 3;
|
|
break;
|
|
case 32:
|
|
id3 |= 1 << 3;
|
|
break;
|
|
case 64:
|
|
id3 |= 2 << 3;
|
|
break;
|
|
case 128:
|
|
id3 |= 3 << 3;
|
|
break;
|
|
case 256:
|
|
id3 |= 4 << 3;
|
|
break;
|
|
case 512:
|
|
id3 |= 5 << 3;
|
|
break;
|
|
case 1024:
|
|
id3 |= 6 << 3;
|
|
break;
|
|
case 2048:
|
|
id3 |= 7 << 3;
|
|
break;
|
|
}
|
|
|
|
return id3;
|
|
}
|
|
|
|
static void pl041_reset(pl041_state *s)
|
|
{
|
|
DBG_L1("pl041_reset\n");
|
|
|
|
memset(&s->regs, 0x00, sizeof(pl041_regfile));
|
|
|
|
s->regs.slfr = SL1TXEMPTY | SL2TXEMPTY | SL12TXEMPTY;
|
|
s->regs.sr1 = TXFE | RXFE | TXHE;
|
|
s->regs.isr1 = 0;
|
|
|
|
memset(&s->fifo1, 0x00, sizeof(s->fifo1));
|
|
}
|
|
|
|
|
|
static void pl041_fifo1_write(pl041_state *s, uint32_t value)
|
|
{
|
|
pl041_channel *channel = &s->fifo1;
|
|
pl041_fifo *fifo = &s->fifo1.tx_fifo;
|
|
|
|
/* Push the value in the FIFO */
|
|
if (channel->tx_compact_mode == 0) {
|
|
/* Non-compact mode */
|
|
|
|
if (fifo->level < s->fifo_depth) {
|
|
/* Pad the value with 0 to obtain a 20-bit sample */
|
|
switch (channel->tx_sample_size) {
|
|
case 12:
|
|
value = (value << 8) & 0xFFFFF;
|
|
break;
|
|
case 16:
|
|
value = (value << 4) & 0xFFFFF;
|
|
break;
|
|
case 18:
|
|
value = (value << 2) & 0xFFFFF;
|
|
break;
|
|
case 20:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Store the sample in the FIFO */
|
|
fifo->data[fifo->level++] = value;
|
|
}
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
else {
|
|
DBG_L1("fifo1 write: overrun\n");
|
|
}
|
|
#endif
|
|
} else {
|
|
/* Compact mode */
|
|
|
|
if ((fifo->level + 2) < s->fifo_depth) {
|
|
uint32_t i = 0;
|
|
uint32_t sample = 0;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
sample = value & 0xFFFF;
|
|
value = value >> 16;
|
|
|
|
/* Pad each sample with 0 to obtain a 20-bit sample */
|
|
switch (channel->tx_sample_size) {
|
|
case 12:
|
|
sample = sample << 8;
|
|
break;
|
|
case 16:
|
|
default:
|
|
sample = sample << 4;
|
|
break;
|
|
}
|
|
|
|
/* Store the sample in the FIFO */
|
|
fifo->data[fifo->level++] = sample;
|
|
}
|
|
}
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
else {
|
|
DBG_L1("fifo1 write: overrun\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* Update the status register */
|
|
if (fifo->level > 0) {
|
|
s->regs.sr1 &= ~(TXUNDERRUN | TXFE);
|
|
}
|
|
|
|
if (fifo->level >= (s->fifo_depth / 2)) {
|
|
s->regs.sr1 &= ~TXHE;
|
|
}
|
|
|
|
if (fifo->level >= s->fifo_depth) {
|
|
s->regs.sr1 |= TXFF;
|
|
}
|
|
|
|
DBG_L2("fifo1_push sr1 = 0x%08x\n", s->regs.sr1);
|
|
}
|
|
|
|
static void pl041_fifo1_transmit(pl041_state *s)
|
|
{
|
|
pl041_channel *channel = &s->fifo1;
|
|
pl041_fifo *fifo = &s->fifo1.tx_fifo;
|
|
uint32_t slots = s->regs.txcr1 & TXSLOT_MASK;
|
|
uint32_t written_samples;
|
|
|
|
/* Check if FIFO1 transmit is enabled */
|
|
if ((channel->tx_enabled) && (slots & (TXSLOT3 | TXSLOT4))) {
|
|
if (fifo->level >= (s->fifo_depth / 2)) {
|
|
int i;
|
|
|
|
DBG_L1("Transfer FIFO level = %i\n", fifo->level);
|
|
|
|
/* Try to transfer the whole FIFO */
|
|
for (i = 0; i < (fifo->level / 2); i++) {
|
|
uint32_t left = fifo->data[i * 2];
|
|
uint32_t right = fifo->data[i * 2 + 1];
|
|
|
|
/* Transmit two 20-bit samples to the codec */
|
|
if (lm4549_write_samples(&s->codec, left, right) == 0) {
|
|
DBG_L1("Codec buffer full\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
written_samples = i * 2;
|
|
if (written_samples > 0) {
|
|
/* Update the FIFO level */
|
|
fifo->level -= written_samples;
|
|
|
|
/* Move back the pending samples to the start of the FIFO */
|
|
for (i = 0; i < fifo->level; i++) {
|
|
fifo->data[i] = fifo->data[written_samples + i];
|
|
}
|
|
|
|
/* Update the status register */
|
|
s->regs.sr1 &= ~TXFF;
|
|
|
|
if (fifo->level <= (s->fifo_depth / 2)) {
|
|
s->regs.sr1 |= TXHE;
|
|
}
|
|
|
|
if (fifo->level == 0) {
|
|
s->regs.sr1 |= TXFE | TXUNDERRUN;
|
|
DBG_L1("Empty FIFO\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pl041_isr1_update(pl041_state *s)
|
|
{
|
|
/* Update ISR1 */
|
|
if (s->regs.sr1 & TXUNDERRUN) {
|
|
s->regs.isr1 |= URINTR;
|
|
} else {
|
|
s->regs.isr1 &= ~URINTR;
|
|
}
|
|
|
|
if (s->regs.sr1 & TXHE) {
|
|
s->regs.isr1 |= TXINTR;
|
|
} else {
|
|
s->regs.isr1 &= ~TXINTR;
|
|
}
|
|
|
|
if (!(s->regs.sr1 & TXBUSY) && (s->regs.sr1 & TXFE)) {
|
|
s->regs.isr1 |= TXCINTR;
|
|
} else {
|
|
s->regs.isr1 &= ~TXCINTR;
|
|
}
|
|
|
|
/* Update the irq state */
|
|
qemu_set_irq(s->irq, ((s->regs.isr1 & s->regs.ie1) > 0) ? 1 : 0);
|
|
DBG_L2("Set interrupt sr1 = 0x%08x isr1 = 0x%08x masked = 0x%08x\n",
|
|
s->regs.sr1, s->regs.isr1, s->regs.isr1 & s->regs.ie1);
|
|
}
|
|
|
|
static void pl041_request_data(void *opaque)
|
|
{
|
|
pl041_state *s = (pl041_state *)opaque;
|
|
|
|
/* Trigger pending transfers */
|
|
pl041_fifo1_transmit(s);
|
|
pl041_isr1_update(s);
|
|
}
|
|
|
|
static uint64_t pl041_read(void *opaque, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
pl041_state *s = (pl041_state *)opaque;
|
|
int value;
|
|
|
|
if ((offset >= PL041_periphid0) && (offset <= PL041_pcellid3)) {
|
|
if (offset == PL041_periphid3) {
|
|
value = pl041_compute_periphid3(s);
|
|
} else {
|
|
value = pl041_default_id[(offset - PL041_periphid0) >> 2];
|
|
}
|
|
|
|
DBG_L1("pl041_read [0x%08x] => 0x%08x\n", offset, value);
|
|
return value;
|
|
} else if (offset <= PL041_dr4_7) {
|
|
value = *((uint32_t *)&s->regs + (offset >> 2));
|
|
} else {
|
|
DBG_L1("pl041_read: Reserved offset %x\n", (int)offset);
|
|
return 0;
|
|
}
|
|
|
|
switch (offset) {
|
|
case PL041_allints:
|
|
value = s->regs.isr1 & 0x7F;
|
|
break;
|
|
}
|
|
|
|
DBG_L1("pl041_read [0x%08x] %s => 0x%08x\n", offset,
|
|
get_reg_name(offset), value);
|
|
|
|
return value;
|
|
}
|
|
|
|
static void pl041_write(void *opaque, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
pl041_state *s = (pl041_state *)opaque;
|
|
uint16_t control, data;
|
|
uint32_t result;
|
|
|
|
DBG_L1("pl041_write [0x%08x] %s <= 0x%08x\n", offset,
|
|
get_reg_name(offset), (unsigned int)value);
|
|
|
|
/* Write the register */
|
|
if (offset <= PL041_dr4_7) {
|
|
*((uint32_t *)&s->regs + (offset >> 2)) = value;
|
|
} else {
|
|
DBG_L1("pl041_write: Reserved offset %x\n", (int)offset);
|
|
return;
|
|
}
|
|
|
|
/* Execute the actions */
|
|
switch (offset) {
|
|
case PL041_txcr1:
|
|
{
|
|
pl041_channel *channel = &s->fifo1;
|
|
|
|
uint32_t txen = s->regs.txcr1 & TXEN;
|
|
uint32_t tsize = (s->regs.txcr1 & TSIZE_MASK) >> TSIZE_MASK_BIT;
|
|
uint32_t compact_mode = (s->regs.txcr1 & TXCOMPACT) ? 1 : 0;
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
uint32_t slots = (s->regs.txcr1 & TXSLOT_MASK) >> TXSLOT_MASK_BIT;
|
|
uint32_t txfen = (s->regs.txcr1 & TXFEN) > 0 ? 1 : 0;
|
|
#endif
|
|
|
|
DBG_L1("=> txen = %i slots = 0x%01x tsize = %i compact = %i "
|
|
"txfen = %i\n", txen, slots, tsize, compact_mode, txfen);
|
|
|
|
channel->tx_enabled = txen;
|
|
channel->tx_compact_mode = compact_mode;
|
|
|
|
switch (tsize) {
|
|
case 0:
|
|
channel->tx_sample_size = 16;
|
|
break;
|
|
case 1:
|
|
channel->tx_sample_size = 18;
|
|
break;
|
|
case 2:
|
|
channel->tx_sample_size = 20;
|
|
break;
|
|
case 3:
|
|
channel->tx_sample_size = 12;
|
|
break;
|
|
}
|
|
|
|
DBG_L1("TX enabled = %i\n", channel->tx_enabled);
|
|
DBG_L1("TX compact mode = %i\n", channel->tx_compact_mode);
|
|
DBG_L1("TX sample width = %i\n", channel->tx_sample_size);
|
|
|
|
/* Check if compact mode is allowed with selected tsize */
|
|
if (channel->tx_compact_mode == 1) {
|
|
if ((channel->tx_sample_size == 18) ||
|
|
(channel->tx_sample_size == 20)) {
|
|
channel->tx_compact_mode = 0;
|
|
DBG_L1("Compact mode not allowed with 18/20-bit sample size\n");
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
case PL041_sl1tx:
|
|
s->regs.slfr &= ~SL1TXEMPTY;
|
|
|
|
control = (s->regs.sl1tx >> 12) & 0x7F;
|
|
data = (s->regs.sl2tx >> 4) & 0xFFFF;
|
|
|
|
if ((s->regs.sl1tx & SLOT1_RW) == 0) {
|
|
/* Write operation */
|
|
lm4549_write(&s->codec, control, data);
|
|
} else {
|
|
/* Read operation */
|
|
result = lm4549_read(&s->codec, control);
|
|
|
|
/* Store the returned value */
|
|
s->regs.sl1rx = s->regs.sl1tx & ~SLOT1_RW;
|
|
s->regs.sl2rx = result << 4;
|
|
|
|
s->regs.slfr &= ~(SL1RXBUSY | SL2RXBUSY);
|
|
s->regs.slfr |= SL1RXVALID | SL2RXVALID;
|
|
}
|
|
break;
|
|
|
|
case PL041_sl2tx:
|
|
s->regs.sl2tx = value;
|
|
s->regs.slfr &= ~SL2TXEMPTY;
|
|
break;
|
|
|
|
case PL041_intclr:
|
|
DBG_L1("=> Clear interrupt intclr = 0x%08x isr1 = 0x%08x\n",
|
|
s->regs.intclr, s->regs.isr1);
|
|
|
|
if (s->regs.intclr & TXUEC1) {
|
|
s->regs.sr1 &= ~TXUNDERRUN;
|
|
}
|
|
break;
|
|
|
|
case PL041_maincr:
|
|
{
|
|
#if defined(PL041_DEBUG_LEVEL)
|
|
char debug[] = " AACIFE SL1RXEN SL1TXEN";
|
|
if (!(value & AACIFE)) {
|
|
debug[0] = '!';
|
|
}
|
|
if (!(value & SL1RXEN)) {
|
|
debug[8] = '!';
|
|
}
|
|
if (!(value & SL1TXEN)) {
|
|
debug[17] = '!';
|
|
}
|
|
DBG_L1("%s\n", debug);
|
|
#endif
|
|
|
|
if ((s->regs.maincr & AACIFE) == 0) {
|
|
pl041_reset(s);
|
|
}
|
|
break;
|
|
}
|
|
|
|
case PL041_dr1_0:
|
|
case PL041_dr1_1:
|
|
case PL041_dr1_2:
|
|
case PL041_dr1_3:
|
|
pl041_fifo1_write(s, value);
|
|
break;
|
|
}
|
|
|
|
/* Transmit the FIFO content */
|
|
pl041_fifo1_transmit(s);
|
|
|
|
/* Update the ISR1 register */
|
|
pl041_isr1_update(s);
|
|
}
|
|
|
|
static void pl041_device_reset(DeviceState *d)
|
|
{
|
|
pl041_state *s = DO_UPCAST(pl041_state, busdev.qdev, d);
|
|
|
|
pl041_reset(s);
|
|
}
|
|
|
|
static const MemoryRegionOps pl041_ops = {
|
|
.read = pl041_read,
|
|
.write = pl041_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static int pl041_init(SysBusDevice *dev)
|
|
{
|
|
pl041_state *s = FROM_SYSBUS(pl041_state, dev);
|
|
|
|
DBG_L1("pl041_init 0x%08x\n", (uint32_t)s);
|
|
|
|
/* Check the device properties */
|
|
switch (s->fifo_depth) {
|
|
case 8:
|
|
case 32:
|
|
case 64:
|
|
case 128:
|
|
case 256:
|
|
case 512:
|
|
case 1024:
|
|
case 2048:
|
|
break;
|
|
case 16:
|
|
default:
|
|
/* NC FIFO depth of 16 is not allowed because its id bits in
|
|
AACIPERIPHID3 overlap with the id for the default NC FIFO depth */
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"pl041: unsupported non-compact fifo depth [%i]\n",
|
|
s->fifo_depth);
|
|
return -1;
|
|
}
|
|
|
|
/* Connect the device to the sysbus */
|
|
memory_region_init_io(&s->iomem, &pl041_ops, s, "pl041", 0x1000);
|
|
sysbus_init_mmio(dev, &s->iomem);
|
|
sysbus_init_irq(dev, &s->irq);
|
|
|
|
/* Init the codec */
|
|
lm4549_init(&s->codec, &pl041_request_data, (void *)s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_pl041_regfile = {
|
|
.name = "pl041_regfile",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField[]) {
|
|
#define REGISTER(name, offset) VMSTATE_UINT32(name, pl041_regfile),
|
|
#include "pl041.hx"
|
|
#undef REGISTER
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_pl041_fifo = {
|
|
.name = "pl041_fifo",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32(level, pl041_fifo),
|
|
VMSTATE_UINT32_ARRAY(data, pl041_fifo, MAX_FIFO_DEPTH),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_pl041_channel = {
|
|
.name = "pl041_channel",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_STRUCT(tx_fifo, pl041_channel, 0,
|
|
vmstate_pl041_fifo, pl041_fifo),
|
|
VMSTATE_UINT8(tx_enabled, pl041_channel),
|
|
VMSTATE_UINT8(tx_compact_mode, pl041_channel),
|
|
VMSTATE_UINT8(tx_sample_size, pl041_channel),
|
|
VMSTATE_STRUCT(rx_fifo, pl041_channel, 0,
|
|
vmstate_pl041_fifo, pl041_fifo),
|
|
VMSTATE_UINT8(rx_enabled, pl041_channel),
|
|
VMSTATE_UINT8(rx_compact_mode, pl041_channel),
|
|
VMSTATE_UINT8(rx_sample_size, pl041_channel),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_pl041 = {
|
|
.name = "pl041",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32(fifo_depth, pl041_state),
|
|
VMSTATE_STRUCT(regs, pl041_state, 0,
|
|
vmstate_pl041_regfile, pl041_regfile),
|
|
VMSTATE_STRUCT(fifo1, pl041_state, 0,
|
|
vmstate_pl041_channel, pl041_channel),
|
|
VMSTATE_STRUCT(codec, pl041_state, 0,
|
|
vmstate_lm4549_state, lm4549_state),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property pl041_device_properties[] = {
|
|
/* Non-compact FIFO depth property */
|
|
DEFINE_PROP_UINT32("nc_fifo_depth", pl041_state, fifo_depth, DEFAULT_FIFO_DEPTH),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void pl041_device_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
|
|
|
|
k->init = pl041_init;
|
|
dc->no_user = 1;
|
|
dc->reset = pl041_device_reset;
|
|
dc->vmsd = &vmstate_pl041;
|
|
dc->props = pl041_device_properties;
|
|
}
|
|
|
|
static TypeInfo pl041_device_info = {
|
|
.name = "pl041",
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(pl041_state),
|
|
.class_init = pl041_device_class_init,
|
|
};
|
|
|
|
static void pl041_register_types(void)
|
|
{
|
|
type_register_static(&pl041_device_info);
|
|
}
|
|
|
|
type_init(pl041_register_types)
|