forked from suse-edge/Factory
83 lines
2.4 KiB
Plaintext
83 lines
2.4 KiB
Plaintext
# This file tells the frr package which daemons to start.
|
|
#
|
|
# Entries are in the format: <daemon>=(yes|no|priority)
|
|
# 0, "no" = disabled
|
|
# 1, "yes" = highest priority
|
|
# 2 .. 10 = lower priorities
|
|
#
|
|
# For daemons which support multiple instances, a 2nd line listing
|
|
# the instances can be added. Eg for ospfd:
|
|
# ospfd=yes
|
|
# ospfd_instances="1,2"
|
|
#
|
|
# Priorities were suggested by Dancer <dancer@zeor.simegen.com>.
|
|
# They're used to start the FRR daemons in more than one step
|
|
# (for example start one or two at network initialization and the
|
|
# rest later). The number of FRR daemons being small, priorities
|
|
# must be between 1 and 9, inclusive (or the initscript has to be
|
|
# changed). /etc/init.d/frr then can be started as
|
|
#
|
|
# /etc/init.d/frr <start|stop|restart|<priority>>
|
|
#
|
|
# where priority 0 is the same as 'stop', priority 10 or 'start'
|
|
# means 'start all'
|
|
#
|
|
# Sample configurations for these daemons can be found in
|
|
# /usr/share/doc/frr/examples/.
|
|
#
|
|
# ATTENTION:
|
|
#
|
|
# When activation a daemon at the first time, a config file, even if it is
|
|
# empty, has to be present *and* be owned by the user and group "frr", else
|
|
# the daemon will not be started by /etc/init.d/frr. The permissions should
|
|
# be u=rw,g=r,o=.
|
|
# When using "vtysh" such a config file is also needed. It should be owned by
|
|
# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
|
|
#
|
|
watchfrr_enable=yes
|
|
watchfrr_options="-r '/usr/lib/frr/frr restart %s' -s '/usr/lib/frr/frr start %s' -k '/usr/lib/frr/frr stop %s'"
|
|
#
|
|
zebra=yes
|
|
bgpd=yes
|
|
ospfd=no
|
|
ospf6d=no
|
|
ripd=no
|
|
ripngd=no
|
|
isisd=no
|
|
pimd=no
|
|
nhrpd=no
|
|
eigrpd=no
|
|
sharpd=no
|
|
pbrd=no
|
|
staticd=yes
|
|
bfdd=yes
|
|
fabricd=no
|
|
|
|
#
|
|
# Command line options for the daemons
|
|
#
|
|
zebra_options=("-A 127.0.0.1")
|
|
bgpd_options=("-A 127.0.0.1")
|
|
ospfd_options=("-A 127.0.0.1")
|
|
ospf6d_options=("-A ::1")
|
|
ripd_options=("-A 127.0.0.1")
|
|
ripngd_options=("-A ::1")
|
|
isisd_options=("-A 127.0.0.1")
|
|
pimd_options=("-A 127.0.0.1")
|
|
nhrpd_options=("-A 127.0.0.1")
|
|
eigrpd_options=("-A 127.0.0.1")
|
|
sharpd_options=("-A 127.0.0.1")
|
|
pbrd_options=("-A 127.0.0.1")
|
|
staticd_options=("-A 127.0.0.1")
|
|
bfdd_options=("-A 127.0.0.1")
|
|
fabricd_options=("-A 127.0.0.1")
|
|
|
|
#
|
|
# If the vtysh_enable is yes, then the unified config is read
|
|
# and applied if it exists. If no unified frr.conf exists
|
|
# then the per-daemon <daemon>.conf files are used)
|
|
# If vtysh_enable is no or non-existant, the frr.conf is ignored.
|
|
# it is highly suggested to have this set to yes
|
|
vtysh_enable=yes
|
|
|