This allows wrappers of LayerUpload to implement io.ReadFrom, which
prevents io.Copy on LayerUpload implementations from using repeated 32kB
Writes.
This has a huge performance implication, especially for s3/azure storage
drivers.
To clarify the role of actor, the request data that initiates an event has been
separated. The ActorRecord is pared down to just the username. This eliminates
confusion about where event related data should be added.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Endpoints are now created at applications startup time, using notification
configuration. The instances are then added to a Broadcaster instance, which
becomes the main event sink for the application. At request time, an event
bridge is configured to listen to repository method calls. The actor and source
of the eventBridge are created from the requeest context and application,
respectively. The result is notifications are dispatched with calls to the
context's Repository instance and are queued to each endpoint via the
broadcaster.
This commit also adds the concept of a RequestID and App.InstanceID. The
request id uniquely identifies each request and the InstanceID uniquely
identifies a run of the registry. These identifiers can be used in the future
to correlate log messages with generated events to support rich debugging.
The fields of the app were slightly reorganized for clarity and a few horrid
util functions have been removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After implementing notifications end to end, it was found that decorating
repositories was more straightforward that previously thought. It's unfortunate
to can this package, but it led to the techniques employed in
storage/notifications/listeners.go. The ultimate result turned out much better.
This changeset implements webhook notification endpoints for dispatching
registry events. Repository instances can be decorated by a listener that
converts calls into context-aware events, using a bridge. Events generated in
the bridge are written to a sink. Implementations of sink include a broadcast
and endpoint sink which can be used to configure event dispatch. Endpoints
represent a webhook notification target, with queueing and retries built in.
They can be added to a Broadcaster, which is a simple sink that writes a block
of events to several sinks, to provide a complete dispatch mechanism.
The main caveat to the current approach is that all unsent notifications are
inmemory. Best effort is made to ensure that notifications are not dropped, to
the point where queues may back up on faulty endpoints. If the endpoint is
fixed, the events will be retried and all messages will go through.
Internally, this functionality is all made up of Sink objects. The queuing
functionality is implemented with an eventQueue sink and retries are
implemented with retryingSink. Replacing the inmemory queuing with something
persistent should be as simple as replacing broadcaster with a remote queue and
that sets up the sinks to be local workers listening to that remote queue.
Metrics are kept for each endpoint and exported via expvar. This may not be a
permanent appraoch but should provide enough information for troubleshooting
notification problems.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To provide easier access to digestible content, the paylaod has been made
accessible on the signed manifest type. This hides the specifics of the
interaction with libtrust with the caveat that signatures may be parsed twice.
We'll have to have a future look at the interface for manifest as we may be
making problematic architectural decisions. We'll visit this after the initial
release.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This commit defines the message format used to notify external parties of
activity within a registry instance. The event includes information about which
action was taken on which registry object, including what user created the
action and which instance generated the event.
Message instances can be sent throughout an application or transmitted
externally. An envelope format along with a custom media type is defined along
with tests to detect changes to the wire format.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To address the possibility of confusing registry name components with
repository paths, path components that abut user provided repository names are
escaped with a prefixed underscore. This works because repository name
components are no allowed to start with underscores. The requirements on
backend driver path names have been relaxed greatly to support this use case.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Several API tests were added to ensure correct acceptance of zero-size and
empty tar files. This led to several changes in the storage backend around the
guarantees of remote file reading, which backs the layer and layer upload type.
In support of these changes, zero-length and empty checks have been added to
the digest package. These provide a sanity check against upstream tarsum
changes. The fileReader has been modified to be more robust when reading and
seeking on zero-length or non-existent files. The file no longer needs to exist
for the reader to be created. Seeks can now move beyond the end of the file,
causing reads to issue an io.EOF. This eliminates errors during certain race
conditions for reading files which should be detected by stat calls. As a part
of this, a few error types were factored out and the read buffer size was
increased to something more reasonable.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change provides a toolkit for intercepting registry calls, such as
`ManifestService.Get` and `LayerUpload.Finish`, with the goal of easily
supporting interesting callbacks and listeners. The package proxies
returned objects through the decorate function before creation, allowing one to
carefully choose injection points.
Use cases range from notification systems all the way to cache integration.
While such a tool isn't strictly necessary, it reduces the amount of code
required to accomplish such tasks, deferring the tricky aspects to the
decorator package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
In support of making the storage API ready for supporting notifications and
mirroring, we've begun the process of paring down the storage model. The
process started by creating a central Registry interface. From there, the
common name argument on the LayerService and ManifestService was factored into
a Repository interface. The rest of the changes directly follow from this.
An interface wishlist was added, suggesting a direction to take the registry
package that should support the distribution project's future goals. As these
objects move out of the storage package and we implement a Registry backed by
the http client, these design choices will start getting validation.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change refactors the storage backend to use the new path layout. To
facilitate this, manifest storage has been separated into a revision store and
tag store, supported by a more general blob store. The blob store is a hybrid
object, effectively providing both small object access, keyed by content
address, as well as methods that can be used to manage and traverse links to
underlying blobs. This covers common operations used in the revision store and
tag store, such as linking and traversal. The blob store can also be updated to
better support layer reading but this refactoring has been left for another
day.
The revision store and tag store support the manifest store's compound view of
data. These underlying stores provide facilities for richer access models, such
as content-addressable access and a richer tagging model. The highlight of this
change is the ability to sign a manifest from different hosts and have the
registry merge and serve those signatures as part of the manifest package.
Various other items, such as the delegate layer handler, were updated to more
directly use the blob store or other mechanism to fit with the changes.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Several requirements for storing registry data have been compiled and the
backend layout has been refactored to comply. Specifically, we now store most
data as blobs that are linked from repositories. All data access is traversed
through repositories. Manifest updates are no longer destructive and support
references by digest or tag. Signatures for manifests are now stored externally
to the manifest payload to allow merging of signatures posted at different
time.
The design is detailed in the documentation for pathMapper.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To smooth initial implementation, uploads were spooled to local file storage,
validated, then pushed to remote storage. That approach was flawed in that it
present easy clustering of registry services that share a remote storage
backend. The original plan was to implement resumable hashes then implement
remote upload storage. After some thought, it was found to be better to get
remote spooling working, then optimize with resumable hashes.
Moving to this approach has tradeoffs: after storing the complete upload
remotely, the node must fetch the content and validate it before moving it to
the final location. This can double bandwidth usage to the remote backend.
Modifying the verification and upload code to store intermediate hashes should
be trivial once the layer digest format has settled.
The largest changes for users of the storage package (mostly the registry app)
are the LayerService interface and the LayerUpload interface. The LayerService
now takes qualified repository names to start and resume uploads. In corallry,
the concept of LayerUploadState has been complete removed, exposing all aspects
of that state as part of the LayerUpload object. The LayerUpload object has
been modified to work as an io.WriteSeeker and includes a StartedAt time, to
allow for upload timeout policies. Finish now only requires a digest, eliding
the requirement for a size parameter.
Resource cleanup has taken a turn for the better. Resources are cleaned up
after successful uploads and during a cancel call. Admittedly, this is probably
not completely where we want to be. It's recommend that we bolster this with a
periodic driver utility script that scans for partial uploads and deletes the
underlying data. As a small benefit, we can leave these around to better
understand how and why these uploads are failing, at the cost of some extra
disk space.
Many other changes follow from the changes above. The webapp needs to be
updated to meet the new interface requirements.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change updates the path mapper to be able to specify upload management
locations. This includes a startedat file, which contains the RFC3339 formatted
start time of the upload and the actual data file.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset implements a fileWriter type that can be used to managed writes
to remote files in a StorageDriver. Basically, it manages a local seek position
for a remote path. An efficient use of this implementation will write data in
large blocks.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the common package no longer exists, the testutil package is being moved
up to the root. Ideally, we don't have large omnibus packages, like testutil,
but we can fix that in another refactoring round.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
In preparation for removing the common package, the tarsum utilities are being
moved to the more relevant digest package. This functionality will probably go
away in the future, but it's maintained here for the time being.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To support clustered registry, upload UUIDs must be recognizable by
registries that did not issue the UUID. By creating an HMAC verifiable
upload state token, registries can validate upload requests that other
instances authorized. The tokenProvider interface could also use a redis
store or other system for token handling in the future.
It was probably ill-advised to couple manifest signing and verification to
their respective types. This changeset simply changes them from methods to
functions. These might not even be in this package in the future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Because manifests and their signatures are a discrete component of the
registry, we are moving the definitions into a separate package. This causes us
to lose some test coverage, but we can fill this in shortly. No changes have
been made to the external interfaces, but they are likely to come.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
During client implementation, it was found that requiring the size argument
made client implementation more complex. The original benefit of the size
argument was to provide an additional check alongside of tarsum to validate
incoming data. For the purposes of the registry, it has been determined that
tarsum should be enough to validate incoming content.
At this time, the size check is optional but we may consider removing it
completely.
This change updates the backend storage package that consumes StorageDriver to
use the new Stat call, over CurrentSize. It also makes minor updates for using
WriteStream and ReadStream.
Because json.Marshal does compaction on returned results, applications must
directly use SignedManifest.Raw when the marshaled value is required.
Otherwise, the returned manifest will fail signature checks.
This diff removes a few early outs that caused errors to be unreported and
catches a missed error case for signature verification from libtrust. More work
needs to be done around ensuring consistent error handling but this is enough
to make the API work correctly.
This provides compatibility with what is in docker core, ensuring that image
manifests generated here have the same formatting. We'll need to automate this
some how.
Without this copy, the buffer may be re-used in the json package, causing
missing or corrupted content for the long-lived SignedManifest object. By
creating a new buffer, owned by the SignedManifest object, the content remains
stable.
To provide rich error reporting during manifest pushes, the storage layers
verifyManifest stage has been modified to provide the necessary granularity.
Along with this comes with a partial shift to explicit error types, which
represents a small move in larger refactoring of error handling. Signature
methods from libtrust have been added to the various Manifest types to clean up
the verification code.
A primitive deletion implementation for manifests has been added. It only
deletes the manifest file and doesn't attempt to add some of the richer
features request, such as layer cleanup.
Previously, discussions were still ongoing about different storage layouts that
could support various access models. This changeset removes a layer of
indirection that was in place due to earlier designs. Effectively, this both
associates a layer with a named repository and ensures that content cannot be
accessed across repositories. It also moves to rely on tarsum as a true
content-addressable identifier, removing a layer of indirection during blob
resolution.
This change implements the first pass at image manifest storage on top of the
storagedriver. Very similar to LayerService, its much simpler due to less
complexity of pushing and pulling images.
Various components are still missing, such as detailed error reporting on
missing layers during verification, but the base functionality is present.
This changeset move the Manifest type into the storage package to make the type
accessible to client and registry without import cycles. The structure of the
manifest was also changed to accuratle reflect the stages of the signing
process. A straw man Manifest.Sign method has been added to start testing this
concept out but will probably be accompanied by the more import
SignedManifest.Verify method as the security model develops.
This is probably the start of a concerted effort to consolidate types across
the client and server portions of the code base but we may want to see how such
a handy type, like the Manifest and SignedManifest, would work in docker core.
This change separates out the remote file reader functionality from layer
reprsentation data. More importantly, issues with seeking have been fixed and
thoroughly tested.
Mostly, we've made superficial changes to the storage package to start using
the Digest type. Many of the exported interface methods have been changed to
reflect this in addition to changes in the way layer uploads will be initiated.
Further work here is necessary but will come with a separate PR.
