------------------------------------------------------------------- Wed Jul 31 04:48:17 UTC 2024 - Andreas Stieger - update to 1.8.12: * fix detection of output block device size * do not treat a zero/interrupted write as an end of file ------------------------------------------------------------------- Sun Jun 30 21:38:22 UTC 2024 - Dirk Müller - update to 1.8.10: * feature: new "`--output`" option to write to a file instead of standard output (pull request #90) supplied by xmort ------------------------------------------------------------------- Tue Apr 23 00:44:04 UTC 2024 - Joshua Smith - version update to 1.8.9 * feature: new "--si" option to display and interpret size suffixes in multiples of 1000 rather than 1024 * fix: continue producing progress output when the output is blocking writes * fix: honour the TMPDIR / TMP environment variables again, rather than hard-coding "/tmp", when using a terminal lock file * i18n: corrections and missing strings added to French translations ------------------------------------------------------------------- Wed Feb 14 14:46:34 UTC 2024 - pgajdos@suse.com - version update to 1.8.5 * Corrected percentage formatting so it does not jump from 2 to 3 characters wide at 100%. * Replaced `--remote` mechanism to use a temporary file instead of SysV IPC, so it can work reliably even when there are multiple pv instances. * feature: new `--discard` option to discard input as if writing to /dev/null. * feature: new `--error-skip-block` option to make `--skip- errors` skip whole blocks. * feature: use `posix_fadvise()` like cat(1) does, to improve efficiency. * security: with `--pidfile`, write to a temporary file and rename it into place, to improve security. * security: ignore _TMP_ / _TMPDIR_ environment variables when using a terminal lock file. * Only report errors about missing files when starting to transfer from them, not while calculating size, and behave more like cat(1) by skipping them and moving on. * Auto-calculate total line count with `--line-mode` when all inputs are regular files. * Cope with machine suspend/resume and botched timestamps. * If `--width` or `--height` were provided, do not change them when the window size changes. * When a file descriptor position in `--watchfd` moves backwards, show the rate using the correct prefix. * Rewrite terminal state save/restore so state is not intermittently garbled on exit when using `--cursor`. * Licensing change from Artistic 2.0 to GPLv3+. ------------------------------------------------------------------- Thu Nov 30 11:24:57 UTC 2023 - pgajdos@suse.com - disable testsuite for s390x [bsc#1215338] - remove _constraints again as it didn't help - deleted sources - _constraints (not needed) ------------------------------------------------------------------- Wed Nov 15 12:03:39 UTC 2023 - pgajdos@suse.com - increase required memory in _constraints [bsc#1217165] (tests still fails in ETA related tests) ------------------------------------------------------------------- Tue Sep 26 13:31:17 UTC 2023 - pgajdos@suse.com - add _constraints [bsc#1215338] ------------------------------------------------------------------- Sun Jul 30 23:59:53 UTC 2023 - Jan Engelhardt - Update to release 1.7.24 * correct terminal size detection (was broken by 1.7.17) ------------------------------------------------------------------- Fri Jul 28 11:42:58 UTC 2023 - Jan Engelhardt - Update to release 1.7.18 * New "--sync" option to flush cache to disk after every write * New "--direct-io" option to bypass cache ------------------------------------------------------------------- Mon Jul 17 21:18:13 UTC 2023 - Jan Engelhardt - Update to release 1.7.0 * The "--size" option now accepts "@filename" to use the size of another file. * New "--bits" option to show bit count instead of byte count. * New "--average-rate-window" option, to set the window over which the average rate is calculated, also used for ETA. * The "--watchfd" option will now show relative filenames, if they are under the current directory. * Add burst rate limit to transfer, so rate limits are not broken by bursty traffic. * Corrected elapsed time display to show as D:HH:MM:SS after 1 day, like the ETA does. ------------------------------------------------------------------- Fri Nov 5 19:58:05 UTC 2021 - Jan Engelhardt - Update to release 1.6.20 * Starting pv in the background no longer immediately stops unless the transfer is to/from the terminal. * Using -B, -A, or -T now switches on -C implicitly. ------------------------------------------------------------------- Tue Sep 8 08:48:09 UTC 2020 - Jan Engelhardt - Trim old specfile constructs. ------------------------------------------------------------------- Mon Aug 7 23:34:32 UTC 2017 - jengelh@inai.de - Update to new upstream release 1.6.6 * Fix target buffer size (-B) being ignored * Cap read/write sizes, and check elapsed time during read/write cycle to avoid display hangs with large buffers or slow media. * Report error in "-d" if process fd directory is unreadable, or if process disappears before we start the main loop. ------------------------------------------------------------------- Fri Mar 27 17:00:05 UTC 2015 - jengelh@inai.de - Update to new upstream release 1.6.0 * new option "-D" / "--delay-start" to only show bar after N seconds * new option "--fineta" / "-I" to show ETA as time of day rather than time remaining * change ETA (--eta / -e) so that days are given if the hours remaining are 24 or more * repeat read and write attempts on partial buffer fill/empty to work around post-signal transfer rate drop * output errors on a new line to avoid overwriting transfer bar ------------------------------------------------------------------- Mon Dec 8 00:36:36 UTC 2014 - jengelh@inai.de - Update to new upstream release 1.5.7 * show KiB instead of incorrect kiB * work around awk bug in tests/016-numeric-timer in decimal "," locales ------------------------------------------------------------------- Mon May 5 06:12:30 UTC 2014 - jengelh@inai.de - Update to new upstream release 1.5.3 * Added new display options --buffer-percent, --last-written * New transfer option --no-splice * New option --watchfd to monitor file descriptor status of another process, rather than moving data from stdin to stdout. ------------------------------------------------------------------- Mon Aug 12 10:47:57 UTC 2013 - jengelh@inai.de - Update to new upstream release 1.4.12 * A fix for splice() not using stdin was implemented * A new -0/--null option has been added to count NUL-terminated "lines" ------------------------------------------------------------------- Wed Jun 5 17:11:16 UTC 2013 - jengelh@inai.de - Add explicit BuildRequires for usleep ------------------------------------------------------------------- Fri Jan 25 03:26:52 UTC 2013 - jengelh@inai.de - Update to new upstream release 1.4.6 * updated manual page to show known problem with "-R" on Cygwin * added patch from Pawel Piatek to omit O_NOFOLLOW in AIX ------------------------------------------------------------------- Mon Dec 24 06:48:09 UTC 2012 - jengelh@inai.de - Update to new upstream release 1.4.4 * fix crash when progress is displayed with too-small terminal * new option --skip-errors * new option --stop-at-size to stop after --size bytes * autodetermine size if stdout is a block device * fix a use-after-free bug ------------------------------------------------------------------- Tue Nov 20 15:18:41 UTC 2012 - jengelh@inai.de - Update to new upstream release 1.3.9 * new --pidfile option to save process ID to a file * integrated patch for --numeric with --timer and --bytes * removed signalling from --remote to prevent accidental process kills * new --format option and allow --format parameters to be sent with --remote ------------------------------------------------------------------- Sat Sep 1 11:09:24 UTC 2012 - jengelh@inai.de - Update to new upstream release 1.3.4 * new --disable-splice configure script option * fixed line mode size count with multiple files - Use RH-friendly make install ------------------------------------------------------------------- Mon Jun 25 22:14:15 UTC 2012 - pascal.bleser@opensuse.org - update to 1.3.1: * do not use splice() if the write buffer is not empty - changes from 1.3.0: * fix 1024-boundary display garble * use splice(2) where available * added known bugs section of the manual page * use IEEE1541 units * bug with rate limit under 10 fixed * speed up PV line mode ------------------------------------------------------------------- Tue May 22 05:53:15 UTC 2012 - jengelh@inai.de - Feed through format_spec_file to get copyright header required for factory inclusion ------------------------------------------------------------------- Mon Feb 20 06:52:34 UTC 2012 - jengelh@medozas.de - Update license field to SPDX format - Use short URL - Remove redundant tags/sections from specfile - Parallel build with %_smp_mflags ------------------------------------------------------------------- Fri Jan 14 19:00:38 UTC 2011 - pascal.bleser@opensuse.org - change RPM group to System/Base instead of invalid group System/Tools ------------------------------------------------------------------- Tue Dec 14 16:06:49 UTC 2010 - pascal.bleser@opensuse.org - update to 1.2.0: * an average rate display option was added to better show progress with bursty traffic * a consistent exit status is set to help script writers * various minor cleanups and bug fixes were made ------------------------------------------------------------------- Tue Nov 9 21:55:09 UTC 2010 - pascal.bleser@opensuse.org - moved to utilities ------------------------------------------------------------------- Thu Mar 6 00:00:00 UTC 2008 - guru@unixtech.be - new upstream version ------------------------------------------------------------------- Mon Oct 22 00:00:00 UTC 2007 - guru@unixtech.be - moved to openSUSE Build Service ------------------------------------------------------------------- Thu Aug 30 00:00:00 UTC 2007 - guru@unixtech.be - new upstream version ------------------------------------------------------------------- Fri Aug 3 00:00:00 UTC 2007 - guru@unixtech.be - new upstream version ------------------------------------------------------------------- Mon Feb 5 00:00:00 UTC 2007 - guru@unixtech.be - new upstream version ------------------------------------------------------------------- Tue Feb 28 00:00:00 UTC 2006 - guru@unixtech.be - new upstream version ------------------------------------------------------------------- Thu Dec 8 00:00:00 UTC 2005 - guru@unixtech.be - added debuginfo support - use makeinstall macro - use configure macro - added autoreconf - use install_info SUSE macros - use find_lang macro - rewrote spec file - new upstream version ------------------------------------------------------------------- Fri Jun 17 00:00:00 UTC 2005 - guru@unixtech.be - version 0.9.1 ------------------------------------------------------------------- Sun Nov 7 00:00:00 UTC 2004 - guru@unixtech.be - version 0.8.9 ------------------------------------------------------------------- Mon May 3 00:00:00 UTC 2004 - guru@unixtech.be - version 0.8.5 ------------------------------------------------------------------- Sun Apr 25 00:00:00 UTC 2004 - guru@unixtech.be - version 0.8.2 ------------------------------------------------------------------- Tue Apr 20 00:00:00 UTC 2004 - guru@unixtech.be - version 0.8.1 ------------------------------------------------------------------- Sun Feb 8 00:00:00 UTC 2004 - guru@unixtech.be - version 0.7.0 ------------------------------------------------------------------- Tue Jan 6 00:00:00 UTC 2004 - guru@unixtech.be - new spec-file