jengelh/strongswan
SHA256
1
0
Fork 0
forked from pool/strongswan
Code Pull Requests Activity
3a50c4dfde
strongswan/strongswan.spec

285 lines
8.6 KiB
RPMSpec
Raw Blame History

#
# spec file for package strongswan (Version 4.1.11)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
# package are under the same license as the package itself.
#
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# norootforbuild
Name: strongswan
%define upstream_version 4.1.11
%define strongswan_docdir %{_docdir}/%{name}
Version: 4.1.11
Release: 1
License: GPL v2 or later
Group: Productivity/Networking/Security
Summary: StrongSwan -- OpenSource IPsec-based VPN Solution
Url: http://www.strongswan.org/
PreReq: gmp grep %insserv_prereq %fillup_prereq
Requires: iproute2
Provides: pluto klips ipsec VPN freeswan
Obsoletes: freeswan
Conflicts: openswan
AutoReqProv: on
Source0: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2
Source1: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig
Source2: %{name}.init.in
Patch1: %{name}_modprobe_syslog.dif
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildRequires: bison flex gmp-devel gperf pkg-config
%if 0%{?suse_version} >= 1030
BuildRequires: libpcap-devel
%else
BuildRequires: libpcap
%endif
# --enable-http
BuildRequires: curl-devel
# --enable-ldap
BuildRequires: openldap2-devel
%description
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
* runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec)
kernels
* implements both the IKEv1 and IKEv2 (RFC 4306) key exchange
protocols
* NEW: Fully tested support of IPv6 IPsec tunnel connections
* Dynamical IP address and interface update with IKEv2 MOBIKE (RFC
4555)
* Fast connection startup and periodic update using ipsec starter
* Automatic insertion and deletion of IPsec policy based firewall
rules
* Strong 3DES, AES, Serpent, Twofish, or Blowfish encryption
* NAT-Traversal via UDP encapsulation and port floating (RFC 3947)
* Static Virtual IPs and IKE Mode Config Pull and Push modes
* XAUTH server and client functionality on top of IKE Main Mode
authentication
* Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels
* Authentication based on X.509 certificates or preshared keys
* Generation of a default self-signed certificate during first
strongSwan startup
* Retrieval and local caching of Certificate Revocation Lists via
HTTP or LDAP
* Full support of the Online Certificate Status Protocol (OCSP, RCF
2560).
* CA management (OCSP and CRL URIs, default LDAP server)
* Powerful IPsec policies based on wildcards or intermediate CAs
* Group policies based on X.509 attribute certificates ( RFC 3281)
* Optional storage of RSA private keys and certificates on a
smartcard
* Smartcard access via standardized PKCS #11 interface
* PKCS #11 proxy function offering RSA decryption services via whack
* NEW: strongSwan Manager - a graphical management interface for IKEv2
Authors:
--------
Andreas Steffen
and others
%package doc
Summary: StrongSwan -- OpenSource IPsec-based VPN Solution
Group: Productivity/Networking/Security
%description doc
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
This package provides the StrongSwan documentation.
Authors:
--------
Andreas Steffen
and others
%prep
%setup -q -n %{name}-%{upstream_version}
%patch1 -p0
sed -e 's|@libexecdir@|%_libexecdir|g' \
< $RPM_SOURCE_DIR/strongswan.init.in \
> strongswan.init
%build
export RPM_OPT_FLAGS="$RPM_OPT_FLAGS -W -Wall"
export CFLAGS="$RPM_OPT_FLAGS"
%{?suse_update_config:%{suse_update_config -f}}
autoreconf
%configure \
--enable-smartcard --with-default-pkcs11=%{_libdir}/opensc-pkcs11.so \
--enable-cisco-quirks \
--enable-http \
--enable-ldap
make %_smp_mflags
%install
export RPM_BUILD_ROOT
install -m755 -d ${RPM_BUILD_ROOT}%{_sbindir}/
install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/
install -m755 strongswan.init ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ipsec
ln -s %{_sysconfdir}/init.d/ipsec ${RPM_BUILD_ROOT}%{_sbindir}/rcipsec
#
make install DESTDIR="$RPM_BUILD_ROOT"
#
rm -f ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
cat << EOT > ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
#
# ipsec.secrets
#
# This file holds the RSA private keys or the PSK preshared secrets for
# the IKE/IPsec authentication. See the ipsec.secrets(5) manual page.
#
EOT
#
rm -f $RPM_BUILD_ROOT%{_libdir}/libstrongswan.{so,a,la}
find $RPM_BUILD_ROOT%{_libdir}/ipsec \
-name "*.a" -o -name "*.la" | xargs -r rm -f
#
install -m755 -d ${RPM_BUILD_ROOT}%{strongswan_docdir}/
install -m644 TODO NEWS README COPYING CREDITS \
${RPM_BUILD_ROOT}%{strongswan_docdir}/
%clean
if [ -n "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ] ; then
rm -rf "$RPM_BUILD_ROOT"
fi
%post
%{run_ldconfig}
%{fillup_and_insserv ipsec}
%preun
%{stop_on_removal ipsec}
if test -s %{_sysconfdir}/ipsec.secrets.rpmsave; then
cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave %{_sysconfdir}/ipsec.secrets.rpmsave.old
fi
if test -s %{_sysconfdir}/ipsec.conf.rpmsave; then
cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave %{_sysconfdir}/ipsec.conf.rpmsave.old
fi
%postun
%{run_ldconfig}
%{restart_on_update ipsec}
%{insserv_cleanup}
%files
%defattr(-,root,root)
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets
%dir %{_sysconfdir}/ipsec.d
%dir %{_sysconfdir}/ipsec.d/crls
%dir %{_sysconfdir}/ipsec.d/reqs
%dir %{_sysconfdir}/ipsec.d/certs
%dir %{_sysconfdir}/ipsec.d/acerts
%dir %{_sysconfdir}/ipsec.d/aacerts
%dir %{_sysconfdir}/ipsec.d/cacerts
%dir %{_sysconfdir}/ipsec.d/ocspcerts
%dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private
%config %{_sysconfdir}/init.d/ipsec
%{_sbindir}/rcipsec
%{_sbindir}/ipsec
%{_libdir}/ipsec
%{_libdir}/libstrongswan.*
%if "%{_libdir}" != "%{_libexecdir}"
%{_libexecdir}/ipsec
%endif
%{_mandir}/man5/ipsec.conf.5*
%{_mandir}/man5/ipsec.secrets.5*
%{_mandir}/man8/ipsec.8*
%files doc
%defattr(-,root,root)
%dir %{strongswan_docdir}
%{strongswan_docdir}/TODO
%{strongswan_docdir}/NEWS
%{strongswan_docdir}/README
%{strongswan_docdir}/COPYING
%{strongswan_docdir}/CREDITS
%{_mandir}/man3/anyaddr.3*
%{_mandir}/man3/atoaddr.3*
%{_mandir}/man3/atoasr.3*
%{_mandir}/man3/atosa.3*
%{_mandir}/man3/atoul.3*
%{_mandir}/man3/goodmask.3*
%{_mandir}/man3/initaddr.3*
%{_mandir}/man3/initsubnet.3*
%{_mandir}/man3/keyblobtoid.3*
%{_mandir}/man3/optionsfrom.3*
%{_mandir}/man3/portof.3*
%{_mandir}/man3/prng.3*
%{_mandir}/man3/rangetosubnet.3*
%{_mandir}/man3/sameaddr.3*
%{_mandir}/man3/subnetof.3*
%{_mandir}/man3/ttoaddr.3*
%{_mandir}/man3/ttodata.3*
%{_mandir}/man3/ttosa.3*
%{_mandir}/man3/ttoul.3*
%{_mandir}/man3/version.3*
%{_mandir}/man8/_copyright.8*
%{_mandir}/man8/_updown.8*
%{_mandir}/man8/_updown_espmark.8*
%{_mandir}/man8/openac.8*
%{_mandir}/man8/pluto.8*
%{_mandir}/man8/scepclient.8*
%{_mandir}/man8/starter.8*
%changelog
* Tue Feb 19 2008 mt@suse.de
- Updated to 4.1.11 maintenance release, providing following fixes:
* IKE rekeying in NAT situations did not inherit the NAT conditions
to the rekeyed IKE_SA so that the UDP encapsulation was lost with
the next CHILD_SA rekeying.
* Wrong type definition of the next_payload variable in id_payload.c
caused an INVALID_SYNTAX error on PowerPC platforms.
* Implemented IKEv2 EAP-SIM server and client test modules that use
triplets stored in a file. For details on the configuration see
the scenario 'ikev2/rw-eap-sim-rsa'.
- The 4.1.10 final version, declared upstream as "Fully tested support
of IPv6 IPsec tunnel connections", fixes ordering error in oscp cache,
IPv6 defaults of the nexthop parameter, adds support for new EAP
modules [disabled in this build] and obsoletes our strongswan_path
and strongswan_ipsec_script_msg patches.
- Removed a sed call from init script.
* Sat Dec 08 2007 mt@suse.de
- Updated to 4.1.9 final, including all our patches.
- Changed init script to use ipsec cmd using LSB codes now.
- Added strongswan_path.dif setting a PATH in scripts (updown).
- Added strongswan_ipsec_script_msg.dif for consistent look of
ipsec script messages.
- Added strongswan_modprobe_syslog.dif redirecting modprobe
output to syslog.
* Mon Nov 26 2007 mt@suse.de
- Renamed charon plugins to avoid rpm conflicts with existing
libraries (libstroke). Patch: strongswan-libconflicts.dif
- Added init script. Template file: strongswan.init.in
* Thu Nov 22 2007 mt@suse.de
- Initial, unfinished package
View Git Blame Copy Permalink