jengelh/strongswan
SHA256
1
0
Fork 0
forked from pool/strongswan
Code Pull Requests Activity
e0300ff4a3
strongswan/strongswan.changes

531 lines
28 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Fri Jul 2 14:16:18 UTC 2010 - mt@suse.de
- Added README.SUSE to source list in the spec file.
-------------------------------------------------------------------
Fri May 14 19:19:04 UTC 2010 - mt@suse.de
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled dhcp, farp, ha, socket-dynamic, agent, eap and sql plugins.
- Enabled NetworkManager nm plugin in a separate strongswan-nm package.
-------------------------------------------------------------------
Tue Mar 2 21:42:10 CET 2010 - mt@suse.de
- Updated to strongSwan 4.3.6 release, changes since 4.3.4 are:
* The IKEv2 daemon supports RFC 3779 IP address block constraints
carried as a critical X.509v3 extension in the peer certificate.
* The ipsec pool --add|del dns|nbns command manages DNS and NBNS
name server entries that are sent via the IKEv1 Mode Config or
IKEv2 Configuration Payload to remote clients.
* The Camellia cipher can be used as an IKEv1 encryption algorithm.
* The IKEv1 and IKEV2 daemons now check certificate path length
constraints.
* The new ipsec.conf conn option "inactivity" closes a CHILD_SA if
no traffic was sent or received within the given interval. To close
the complete IKE_SA if its only CHILD_SA was inactive, set the
global strongswan.conf option "charon.inactivity_close_ike" to yes.
* More detailed IKEv2 EAP payload information in debug output
* IKEv2 EAP-SIM and EAP-AKA share joint libsimaka library
* Added required userland changes for proper SHA256 and SHA384/512
in ESP that will be introduced with Linux 2.6.33.
The "sha256"/"sha2_256" keyword now configures the kernel with 128
bit truncation, not the non-standard 96 bit truncation used by
previous releases. To use the old 96 bit truncation scheme, the new
"sha256_96" proposal keyword has been introduced.
* Fixed IPComp in tunnel mode, stripping out the duplicated outer
header. This change makes IPcomp tunnel mode connections
incompatible with previous releases; disable compression on such
tunnels.
* Fixed BEET mode connections on recent kernels by installing SAs
with appropriate traffic selectors, based on a patch by Michael
Rossberg.
* Using extensions (such as BEET mode) and crypto algorithms (such
as twofish, serpent, sha256_96) allocated in the private use space
now require that we know its meaning, i.e. we are talking to
strongSwan. Use the new "charon.send_vendor_id" option in
strongswan.conf to let the remote peer know this is the case.
* Experimental support for draft-eronen-ipsec-ikev2-eap-auth, where
the responder omits public key authentication in favor of a mutual
authentication method. To enable EAP-only authentication, set
rightauth=eap on the responder to rely only on the MSK constructed
AUTH payload. This not-yet standardized extension requires the
strongSwan vendor ID introduced above.
* The IKEv1 daemon ignores the Juniper SRX notification type 40001,
thus allowing interoperability.
* The IKEv1 pluto daemon can now use SQL-based address pools to
deal out virtual IP addresses as a Mode Config server. The pool
capability has been migrated from charon's sql plugin to a new
attr-sql plugin which is loaded by libstrongswan and which can be
used by both daemons either with a SQLite or MySQL database and the
corresponding plugin.
* Plugin names have been streamlined: EAP plugins now have a dash
after eap (e.g. eap-sim), as it is used with the --enable-eap-sim
./configure option.
Plugin configuration sections in strongswan.conf now use the same
name as the plugin itself (i.e. with a dash). Make sure to update
"load" directives and the affected plugin sections in existing
strongswan.conf files.
* The private/public key parsing and encoding has been split up
into separate pkcs1, pgp, pem and dnskey plugins. The public key
implementation plugins gmp, gcrypt and openssl can all make use
of them.
* The EAP-AKA plugin can use different backends for USIM/quintuplet
calculations, very similar to the EAP-SIM plugin. The existing 3GPP2
software implementation has been migrated to a separate plugin.
* The IKEv2 daemon charon gained basic PGP support. It can use
locally installed peer certificates and can issue signatures based
on RSA private keys.
* The new 'ipsec pki' tool provides a set of commands to maintain a
public key infrastructure. It currently supports operations to
create RSA and ECDSA private/public keys, calculate fingerprints and
issue or verify certificates.
* Charon uses a monotonic time source for statistics and job
queueing, behaving correctly if the system time changes (e.g. when
using NTP).
* In addition to time based rekeying, charon supports IPsec SA
lifetimes based on processed volume or number of packets.
They new ipsec.conf paramaters 'lifetime' (an alias to 'keylife'),
'lifebytes' and 'lifepackets' handle SA timeouts, while the
parameters 'margintime' (an alias to rekeymargin), 'marginbytes'
and 'marginpackets' trigger the rekeying before a SA expires.
The existing parameter 'rekeyfuzz' affects all margins.
* If no CA/Gateway certificate is specified in the NetworkManager
plugin, charon uses a set of trusted root certificates preinstalled
by distributions. The directory containing CA certificates can be
specified using the --with-nm-ca-dir=path configure option.
* Fixed the encoding of the Email relative distinguished name in
left|rightid statements.
* Fixed the broken parsing of PKCS#7 wrapped certificates by the
pluto daemon.
* Fixed smartcard-based authentication in the pluto daemon which
was broken by the ECDSA support introduced with the 4.3.2 release.
* A patch contributed by Heiko Hund fixes mixed IPv6 in IPv4 and
vice versa tunnels established with the IKEv1 pluto daemon.
* The pluto daemon now uses the libstrongswan x509 plugin for
certificates and CRls and the struct id type was replaced by
identification_t used by charon and the libstrongswan library.
- Removed obsolete load_secrets patches, refreshed modprobe patch.
- Corrected a time_t cast reported by rpmlint (timer.c:51)
- Disabled libtoolize call and the gcrypt plugin on SLE 10.
-------------------------------------------------------------------
Fri Sep 4 12:56:59 CEST 2009 - mt@suse.de
- Fixed open failure debug message in load_secrets
-------------------------------------------------------------------
Thu Sep 3 23:44:37 CEST 2009 - mt@suse.de
- Applied patch fixing locking in ipsec.secrets inclusion.
-------------------------------------------------------------------
Mon Aug 31 16:06:13 CEST 2009 - mt@suse.de
- Updated to strongSwan 4.3.4 release:
* IKEv2 charon daemon ported to FreeBSD and Mac OS X. Installation
details can be found on wiki.strongswan.org.
* ipsec statusall shows the number of bytes transmitted and received
over ESP connections configured by the IKEv2 charon daemon.
* The IKEv2 charon daemon supports include files in ipsec.secrets.
- Removed obsolete ipsec.secrets include patch (bnc#524799)
and patch to avoid libchecksum version.
-------------------------------------------------------------------
Fri Aug 7 11:44:30 CEST 2009 - mt@suse.de
- Applied patch implementing ipsec.secrets "include" directive
support in charon (http://wiki.strongswan.org/issues/show/82,
bnc#524799).
-------------------------------------------------------------------
Mon Jul 27 13:40:57 CEST 2009 - mt@suse.de
- Updated to strongSwan 4.3.3 release:
* The configuration option --enable-integrity-test plus the
strongswan.conf option libstrongswan.integrity_test = yes
activate integrity tests of the IKE daemons charon and pluto,
libstrongswan and all loaded plugins. Thus dynamic library
misconfigurations and non-malicious file manipulations can be
reliably detected.
* The new default setting libstrongswan.ecp_x_coordinate_only=yes
allows IKEv1 interoperability with MS Windows using the ECP DH
groups 19 and 20.
* The IKEv1 pluto daemon now supports the AES-CCM and AES-GCM ESP
authenticated encryption algorithms.
* The IKEv1 pluto daemon now supports V4 OpenPGP keys.
* The RDN parser vulnerability discovered by Orange Labs research
team was not completely fixed in version 4.3.2. Some more
modifications had to be applied to the asn1_length() function to
make it robust.
- Enabled --enable-integrity-test configure option (new feature).
- Removed patch to avoid plugin versions (accepted by upstream)
and added patch to avoid version for new libchecksum library.
- Added -Wno-pointer-sign -Wno-strict-aliasing CFLAGS in the spec.
-------------------------------------------------------------------
Wed Jun 10 11:04:44 CEST 2009 - mt@suse.de
- Updated to strongSwan 4.3.2 release, that fixes two asn1 parser
DoS vulnerabilities and provides several new features, e.g.:
* The new gcrypt plugin provides symmetric cipher, hasher, RNG,
Diffie-Hellman and RSA crypto primitives using the LGPL licensed
GNU gcrypt library.
* libstrongswan features an integrated crypto selftest framework
for registered algorithms. The test-vector plugin provides a first
set of test vectors and allows pluto and charon to rely on tested
crypto algorithms.
* pluto can now use all libstrongswan plugins with the exception
of x509 and xcbc. Thanks to the openssl plugin, the ECP Diffie-
Hellman groups 19, 20, 21, 25, and 26 as well as ECDSA-256,
ECDSA-384, and ECDSA-521 authentication can be used with IKEv1.
* Applying their fuzzing tool, the Orange Labs vulnerability
research team found another two DoS vulnerabilities, one in the
rather old ASN.1 parser of Relative Distinguished Names (RDNs)
and a second one in the conversion of ASN.1 UTCTIME and
GENERALIZEDTIME strings to a time_t value.
* The nm plugin now passes DNS/NBNS server information to
NetworkManager, allowing a gateway administrator to set DNS/NBNS
configuration on clients dynamically.
* The nm plugin also accepts CA certificates for gateway
authentication. If a CA certificate is configured, strongSwan uses
the entered gateway address as its idenitity, requiring the gateways
certificate to contain the same as subjectAltName.
This allows a gateway administrator to deploy the same
certificates to Windows 7 and NetworkManager clients.
* The command ipsec purgeike deletes IKEv2 SAs that don't have a
CHILD SA.
The command ipsec down <conn>{n} deletes CHILD SA instance n of
connection <conn> whereas ipsec down <conn>{*} deletes all CHILD
SA instances.
The command ipsec down <conn>[n] deletes IKE SA instance n of
connection <conn> plus dependent CHILD SAs whereas ipsec down
<conn>[*] deletes all IKE SA instances of connection <conn>.
* Fixed a regression introduced in 4.3.0 where EAP authentication
calculated the AUTH payload incorrectly. Further, the EAP-MSCHAPv2
MSK key derivation has been updated to be compatible with the
Windows 7 Release Candidate.
* Refactored installation of triggering policies. Routed policies
are handled outside of IKE_SAs to keep them installed in any case.
A tunnel gets established only once, even if initiation is delayed
due network outages.
* Improved the handling of multiple acquire signals triggered by
the kernel.
* Fixed two DoS vulnerabilities in the charon daemon that were
discovered by fuzzing techniques:
1) Sending a malformed IKE_SA_INIT request leaved an incomplete
state which caused a null pointer dereference if a subsequent
CREATE_CHILD_SA request was sent.
2) Sending an IKE_AUTH request with either a missing TSi or TSr
payload caused a null pointer derefence because the checks for
TSi and TSr were interchanged.
The IKEv2 fuzzer used was developped by the Orange Labs
vulnerability research team. The tool was initially written
by Gabriel Campana and is now maintained by Laurent Butti.
* Added support for AES counter mode in ESP in IKEv2 using the
proposal keywords aes128ctr, aes192ctr and aes256ctr.
* Further progress in refactoring pluto: Use of the curl and ldap
plugins for fetching crls and OCSP. Use of the random plugin to
get keying material from /dev/random or /dev/urandom. Use of the
openssl plugin as an alternative to the aes, des, sha1, sha2, and
md5 plugins. The blowfish, twofish, and serpent encryption plugins
are now optional and are not enabled by default.
- Enabled new gcrypt plugin
- Adopted spec file and modprobe to syslog patch
- Removed obsolete getline glibc collision patch
- Added patch to avoid library version for plugins (rpmlint).
- Replaced update-dns-server patch with a --with-resolv-conf.
- Removed restart_on_update from spec file (see bnc#450390).
-------------------------------------------------------------------
Mon Jun 8 00:21:13 CEST 2009 - ro@suse.de
- rename getline to my_getline to avoid collision with function
from glibc
-------------------------------------------------------------------
Tue Jun 2 09:56:16 CEST 2009 - mt@suse.de
- Applied fix for a Denial-of-Service vulnerability where receiving
a malformed IKE_SA_INIT request leaves an incomplete state which
causes a crash of the IKEv2 charon while dereferencing a NULL
pointer if a subsequent CREATE_CHILD_SA is received (bnc#507742).
- Applied fix for a Denial-of-Service vulnerability where receiving
a malformed IKE_AUTH request with either a missing TSi or TSr
traffic selector payload causes a crash of the IKEv2 charon while
dereferencing a NULL pointer because the NULL pointer checks of
TSi and TSr before destruction were erroneously swapped
(bnc#507742).
-------------------------------------------------------------------
Tue Mar 31 11:19:03 CEST 2009 - mt@suse.de
- Updated to strongSwan 4.2.14 release that fixes a grave DPD
denial of service vulnerability registered as CVE-2009-0790,
that had been slumbering in the code for many years:
* A vulnerability in the Dead Peer Detection (RFC 3706) code
was found by Gerd v. Egidy <gerd.von.egidy@intra2net.com> of
Intra2net AG affecting all Openswan and strongSwan releases.
A malicious (or expired ISAKMP) R_U_THERE or R_U_THERE_ACK
Dead Peer Detection packet can cause the pluto IKE daemon to
crash and restart. No authentication or encryption is required
to trigger this bug. One spoofed UDP packet can cause the pluto
IKE daemon to restart and be unresponsive for a few seconds
while restarting. This DPD null state vulnerability has been
officially registered as CVE-2009-0790 and is fixed by this
release.
* The new server-side EAP RADIUS plugin (--enable-eap-radius)
relays EAP messages to and from a RADIUS server. Succesfully
tested with with a freeradius server using EAP-MD5 and EAP-SIM.
* ASN.1 to time_t conversion caused a time wrap-around for dates
after Jan 18 03:14:07 UTC 2038 on 32-bit platforms.
As a workaround such dates are set to the maximum representable
time, i.e. Jan 19 03:14:07 UTC 2038.
* Distinguished Names containing wildcards (*) are not sent in the
IDr payload anymore.
-------------------------------------------------------------------
Mon Oct 20 09:27:06 CEST 2008 - mt@suse.de
- Updated to 4.2.8 release:
* IKEv2 charon daemon supports authentication based on raw public
keys stored in the SQL database backend. The ipsec listpubkeys
command lists the available raw public keys via the stroke
interface.
* Several MOBIKE improvements: Detect changes in NAT mappings in
DPD exchanges, handle events if kernel detects NAT mapping changes
in UDP-encapsulated ESP packets (requires kernel patch), reuse old
addesses in MOBIKE updates as long as possible and other fixes.
* Fixed a bug in addr_in_subnet() which caused insertion of wrong
source routes for destination subnets having netwmasks not being a
multiple of 8 bits. Thanks go to Wolfgang Steudel, TU Ilmenau for
reporting this bug.
-------------------------------------------------------------------
Tue Oct 14 16:29:59 CEST 2008 - mt@suse.de
- Applied fix for addr_in_subnet() extracted from strongswan-4.2.8
which caused insertion of wrong source routes for destination
subnets having netwmasks not being a multiple of 8 bits.
Thanks go to Wolfgang Steudel, TU Ilmenau for reporting this bug.
(bnc#435200)
-------------------------------------------------------------------
Fri Oct 10 08:08:35 CEST 2008 - mt@suse.de
- Applied fix for a Denial-of-Service vulnerability where an
IKE_SA_INIT message with a KE payload containing zeroes only can
cause a crash of the IKEv2 charon daemon due to a NULL pointer
returned by the mpz_export() function of the GNU Multi Precision
(GMP) library. Thanks go to Mu Dynamics Research Labs for making
us aware of this problem. (bnc#435194)
-------------------------------------------------------------------
Thu Aug 28 14:31:49 CEST 2008 - mt@suse.de
- Fixed to use --enable-curl instead of --enable-http as before
- Enabled the OpenSSL crypto plugin in the spec file.
-------------------------------------------------------------------
Thu Aug 28 09:48:14 CEST 2008 - mt@suse.de
- Updated to 4.2.6 release, fixing bugs and offering a lot of new
features comparing to the last version provided by this package.
Most important are:
* A NetworkManager plugin allows GUI-based configuration of
road-warrior clients in a simple way. It features X509 based
gateway authentication and EAP client authentication, tunnel
setup/teardown and storing passwords in the Gnome Keyring.
* A new EAP-GTC plugin implements draft-sheffer-ikev2-gtc-00.txt
and allows username/password authentication against any PAM
service on the gateway. The new EAP method interacts nicely with
the NetworkManager plugin and allows client authentication against
e.g. LDAP.
* Improved support for the EAP-Identity method. The new ipsec.conf
eap_identity parameter defines an additional identity to pass to
the server in EAP authentication.
* Fixed two multithreading deadlocks occurring when starting up
several hundred tunnels concurrently.
* Fixed the --enable-integrity-test configure option which
computes a SHA-1 checksum over the libstrongswan library.
* Consistent logging of IKE and CHILD SAs at the audit (AUD) level.
* Improved the performance of the SQL-based virtual IP address pool
by introducing an additional addresses table. The leases table
storing only history information has become optional and can be
disabled by setting charon.plugins.sql.lease_history = no in
strongswan.conf.
* The XFRM_STATE_AF_UNSPEC flag added to xfrm.h allows IPv4-over-IPv6
and IPv6-over-IPv4 tunnels with the 2.6.26 and later Linux kernels.
* management of different virtual IP pools for different network
interfaces have become possible.
* fixed a bug which prevented the assignment of more than 256
virtual IP addresses from a pool managed by an sql database.
* fixed a bug which did not delete own IPCOMP SAs in the kernel.
* The openssl plugin supports the elliptic curve Diffie-Hellman
groups 19, 20, 21, 25, and 26 and ECDSA authentication using
elliptic curve X.509 certificates.
* Fixed a bug in stroke which caused multiple charon threads to
close the file descriptors during packet transfers over the stroke
socket.
* ESP sequence numbers are now migrated in IPsec SA updates handled
by MOBIKE. Works only with Linux kernels >= 2.6.17.
* Fixed a number of minor bugs that where discovered during the 4th
IKEv2 interoperability workshop in San Antonio, TX.
* Plugins for libstrongswan and charon can optionally be loaded
according to a configuration in strongswan.conf. Most components
provide a "load = " option followed by a space separated list of
plugins to load. This allows e.g. the fallback from a hardware
crypto accelerator to to software-based crypto plugins.
* Charons SQL plugin has been extended by a virtual IP address pool.
Configurations with a rightsourceip=%poolname setting query a
SQLite or MySQL database for leases. The "ipsec pool" command helps
in administrating the pool database. See ipsec pool --help for the
available options
* The Authenticated Encryption Algorithms AES-CCM-8/12/16 and
AES-GCM-8/12/16 for ESP are now supported starting with the Linux
2.6.25 kernel. The syntax is e.g. esp=aes128ccm12 or esp=aes256gcm16.
- Added patch disabling direct modifications of resolv.conf; has to
be replaced by a netconfig call.
- Added patch adding a missed file name argument in printf call in the
scripts/thread_analysis.c file -- resulting binary is not installed.
- Removed obsolete patches crash_badcfg_reload and old-caps-version.
-------------------------------------------------------------------
Mon Jun 30 22:40:31 CEST 2008 - mt@suse.de
- Added fix that explicitly enables version 1 linux capabilities
on version 2 systems to aviod that the charon and pluto daemons
exit because of failed capset call (bnc#404989).
-------------------------------------------------------------------
Mon May 19 16:17:16 CEST 2008 - mt@suse.de
- Applied fix (strongswan_crash_badcfg_reload.dif) to avoid
a crash after reloading with bad config (bnc#392062).
-------------------------------------------------------------------
Wed Apr 23 14:28:41 CEST 2008 - mt@suse.de
- Updated to 4.2.1 release. A lot of code refactoring in the 4.2
release provides much more modularity and therefore much more
extensiblity and offers the following new features:
* libstrongswan has been modularized to attach crypto algorithms,
credential implementations (secret and private keys, certificates)
and http/ldap fetchers dynamically through plugins.
* A relational database API that uses pluggable database providers
was added to libstrongswan including plugins for MySQL and SQLite.
* The IKEv2 keying charon daemon has become more extensible. Generic
plugins can provide arbitrary interfaces to credential stores and
connection management interfaces. Also any EAP method can be added.
* The authentication and credential framework in charon has been
heavily refactored to support modular credential providers, proper
CERTREQ/CERT payload exchanges and extensible authorization rules.
* Support for "Hash and URL" encoded certificate payloads has been
implemented in the IKEv2 daemon charon.
* The IKEv2 daemon charon now supports the "uniqueids" option to
close multiple IKE_SAs with the same peer.
* The crypto factory in libstrongswan additionally supports random
number generators. Plugins may provide other sources of randomness.
* Extended the credential framework by a caching option to allow
plugins persistent caching of fetched credentials.
* The new trust chain verification introduced in 4.2.0 has been
parallelized. Threads fetching CRL or OCSP information no longer
block other threads.
* A new IKEv2 configuration attribute framework has been introduced
allowing plugins to provide virtual IP addresses, and in the future,
other configuration attribute services (e.g. DNS/WINS servers).
* The stroke plugin has been extended to provide virtual IP addresses
from a simple pool defined in ipsec.conf.
* Fixed compilation on uClibc and a couple of other minor bugs.
* The IKEv1 pluto daemon now supports the ESP encryption algorithm
CAMELLIA with key lengths of 128, 192, and 256 bits, as well as the
authentication algorithm AES_XCBC_MAC.
- Applied a small patch defining _GNU_SOURCE for struct in6_pktinfo
and adding inclusion of limits.h for PATH_MAX availability.
- Added rpmlintrc file and a libtoolize call to the spec file.
-------------------------------------------------------------------
Tue Feb 19 11:44:03 CET 2008 - mt@suse.de
- Updated to 4.1.11 maintenance release, providing following fixes:
* IKE rekeying in NAT situations did not inherit the NAT conditions
to the rekeyed IKE_SA so that the UDP encapsulation was lost with
the next CHILD_SA rekeying.
* Wrong type definition of the next_payload variable in id_payload.c
caused an INVALID_SYNTAX error on PowerPC platforms.
* Implemented IKEv2 EAP-SIM server and client test modules that use
triplets stored in a file. For details on the configuration see
the scenario 'ikev2/rw-eap-sim-rsa'.
- The 4.1.10 final version, declared upstream as "Fully tested support
of IPv6 IPsec tunnel connections", fixes ordering error in oscp cache,
IPv6 defaults of the nexthop parameter, adds support for new EAP
modules [disabled in this build] and obsoletes our strongswan_path
and strongswan_ipsec_script_msg patches.
- Removed a sed call from init script.
-------------------------------------------------------------------
Sat Dec 8 13:03:42 CET 2007 - mt@suse.de
- Updated to 4.1.9 final, including all our patches.
- Changed init script to use ipsec cmd using LSB codes now.
- Added strongswan_path.dif setting a PATH in scripts (updown).
- Added strongswan_ipsec_script_msg.dif for consistent look of
ipsec script messages.
- Added strongswan_modprobe_syslog.dif redirecting modprobe
output to syslog.
-------------------------------------------------------------------
Mon Nov 26 10:19:40 CET 2007 - mt@suse.de
- Renamed charon plugins to avoid rpm conflicts with existing
libraries (libstroke). Patch: strongswan-libconflicts.dif
- Added init script. Template file: strongswan.init.in
-------------------------------------------------------------------
Thu Nov 22 10:25:56 CET 2007 - mt@suse.de
- Initial, unfinished package
View Git Blame Copy Permalink