virtualbox/vbox-vboxadd-init-script.diff

Index: VirtualBox-6.0.0/src/VBox/Additions/linux/installer/vboxadd.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/Additions/linux/installer/vboxadd.sh
+++ VirtualBox-6.0.0/src/VBox/Additions/linux/installer/vboxadd.sh
@@ -26,11 +26,14 @@
 # Provides:       vboxadd
 # Required-Start:
 # Required-Stop:
-# Default-Start:  2 3 4 5
+# Should-Start:   $remote_fs
+# Should-Stop:    $remote_fs
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # X-Start-Before: display-manager
 # X-Service-Type: oneshot
 # Description:    VirtualBox Linux Additions kernel modules
+# Short-Description: VirtualBox Linux Additions kernel modules
 ### END INIT INFO
 
 ## @todo This file duplicates a lot of script with vboxdrv.sh.  When making
@@ -141,18 +144,9 @@ module_build_log()
 
 dev=/dev/vboxguest
 userdev=/dev/vboxuser
-config=/var/lib/VBoxGuestAdditions/config
 owner=vboxadd
 group=1
 
-if test -r $config; then
-  . $config
-else
-  fail "Configuration file $config not found"
-fi
-test -n "$INSTALL_DIR" -a -n "$INSTALL_VER" ||
-  fail "Configuration file $config not complete"
-
 running_vboxguest()
 {
     lsmod | grep -q "vboxguest[^_-]"
@@ -195,12 +189,6 @@ do_vboxguest_non_udev()
             fail "Cannot create device $dev with major $maj and minor $min"
         }
     fi
-    chown $owner:$group $dev 2>/dev/null || {
-        rm -f $dev 2>/dev/null
-        rm -f $userdev 2>/dev/null
-        rmmod vboxguest 2>/dev/null
-        fail "Cannot change owner $owner:$group for device $dev"
-    }
 
     if [ ! -c $userdev ]; then
         maj=10
@@ -211,12 +199,6 @@ do_vboxguest_non_udev()
                 rmmod vboxguest 2>/dev/null
                 fail "Cannot create device $userdev with major $maj and minor $min"
             }
-            chown $owner:$group $userdev 2>/dev/null || {
-                rm -f $dev 2>/dev/null
-                rm -f $userdev 2>/dev/null
-                rmmod vboxguest 2>/dev/null
-                fail "Cannot change owner $owner:$group for device $userdev"
-            }
         fi
     fi
 }
@@ -224,10 +206,9 @@ do_vboxguest_non_udev()
 start()
 {
     begin "Starting."
-    if test -z "${INSTALL_NO_MODULE_BUILDS}"; then
-        setup --quick
+    setup --quick
         test -d /sys &&
-            ps -A -o comm | grep -q '/*udevd$' 2>/dev/null ||
+        ps -A -o comm | grep -q '/*udevd$' 2>/dev/null ||
             no_udev=1
         running_vboxguest || {
             rm -f $dev || {
@@ -236,7 +217,7 @@ start()
             rm -f $userdev || {
                 fail "Cannot remove $userdev"
             }
-            $MODPROBE vboxguest >/dev/null 2>&1 ||
+            $MODPROBE vboxguest >/dev/null 2>&1 || {
                 fail "modprobe vboxguest failed"
             case "$no_udev" in 1)
                 sleep .5;;
@@ -434,9 +415,9 @@ create_udev_rule()
         echo "KERNEL=${udev_fix}\"vboxuser\", NAME=\"vboxuser\", OWNER=\"vboxadd\", MODE=\"0666\"" >> /etc/udev/rules.d/60-vboxadd.rules
     fi
 }
-
-create_module_rebuild_script()
-{
+    # And an rc file to re-build the kernel modules and re-set-up the X server.
+    ln -sf "$lib_path/$PACKAGE/vboxadd" /sbin/rcvboxadd
+    #ln -sf "$lib_path/$PACKAGE/vboxadd-x11" /sbin/rcvboxadd-x11
     # And a post-installation script for rebuilding modules when a new kernel
     # is installed.
     mkdir -p /etc/kernel/postinst.d /etc/kernel/prerm.d
@@ -467,20 +448,13 @@ shared_folder_setup()
     ## @todo It would be nicer if the kernel module just parsed parameters
     # itself instead of needing a separate binary to do that.
     ln -sf "${INSTALL_DIR}/other/mount.vboxsf" /sbin
-    # SELinux security context for the mount helper.
-    if test -e /etc/selinux/config; then
-        # This is correct.  semanage maps this to the real path, and it aborts
-        # with an error, telling you what you should have typed, if you specify
-        # the real path.  The "chcon" is there as a back-up for old guests.
-        command -v semanage > /dev/null &&
-            semanage fcontext -a -t mount_exec_t "${INSTALL_DIR}/other/mount.vboxsf"
-        chcon -t mount_exec_t "${INSTALL_DIR}/other/mount.vboxsf"
-    fi
+    succ_msg
 }
 
 # setup_script
 setup()
 {
+<<<<<<< found
     export BUILD_TYPE
     export USERNAME
 
@@ -517,16 +491,33 @@ setup()
     shared_folder_setup
     if  running_vboxguest || running_vboxadd; then
         info "Running kernel modules will not be replaced until the system is restarted"
-    fi
-    return 0
+||||||| expected
+    export BUILD_TYPE
+    export USERNAME
+
+    MODULE_SRC="$INSTALL_DIR/src/vboxguest-$INSTALL_VER"
+    BUILDINTMP="$MODULE_SRC/build_in_tmp"
+    chcon -t bin_t "$BUILDINTMP" > /dev/null 2>&1
+
+    test -z "${INSTALL_NO_MODULE_BUILDS}" && setup_modules
+    create_vbox_user
+    create_udev_rule
+    test -z "${INSTALL_NO_MODULE_BUILDS}" && create_module_rebuild_script
+    test -n "${QUICKSETUP}" && return 0
+    shared_folder_setup
+    if  running_vboxguest || running_vboxadd; then
+        info "Running kernel modules will not be replaced until the system is restarted"
+=======
+    begin "Recompiling VirtualBox kernel module, NOT. It has been packaged."
+>>>>>>> replacement
+    succ_msg
 }
 
 # cleanup_script
 cleanup()
 {
-    if test -z "${INSTALL_NO_MODULE_BUILDS}"; then
-        # Delete old versions of VBox modules.
-        cleanup_modules
+    # Delete old versions of VBox modules.
+    cleanup_modules
         depmod
 
         # Remove old module sources
@@ -536,12 +527,13 @@ cleanup()
     fi
 
     # Clean-up X11-related bits
-    "${INSTALL_DIR}/init/vboxadd-x11" cleanup
+    #/sbin/rcvboxadd-x11 cleanup
 
     # Remove other files
-    if test -z "${INSTALL_NO_MODULE_BUILDS}"; then
-        rm -f /etc/kernel/postinst.d/vboxadd /etc/kernel/prerm.d/vboxadd
-        rmdir -p /etc/kernel/postinst.d /etc/kernel/prerm.d 2>/dev/null
+    rm /sbin/rcvboxadd 2>/dev/null
+    #rm /sbin/rcvboxadd-x11 2>/dev/null
+    rm -f /etc/kernel/postinst.d/vboxadd /etc/kernel/prerm.d/vboxadd
+    rmdir -p /etc/kernel/postinst.d /etc/kernel/prerm.d 2>/dev/null
     fi
     rm /sbin/mount.vboxsf 2>/dev/null
     rm /etc/udev/rules.d/60-vboxadd.rules 2>/dev/null
Index: VirtualBox-6.0.0/src/VBox/Additions/linux/installer/vboxadd-service.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/Additions/linux/installer/vboxadd-service.sh
+++ VirtualBox-6.0.0/src/VBox/Additions/linux/installer/vboxadd-service.sh
@@ -26,7 +26,7 @@
 # Provides:       vboxadd-service
 # Required-Start: vboxadd
 # Required-Stop:  vboxadd
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # X-Conflicts-With: systemd-timesyncd.service
 # Description:    VirtualBox Additions Service
Index: VirtualBox-6.0.0/src/VBox/Installer/linux/vboxautostart-service.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/Installer/linux/vboxautostart-service.sh
+++ VirtualBox-6.0.0/src/VBox/Installer/linux/vboxautostart-service.sh
@@ -23,7 +23,7 @@
 # Provides:       vboxautostart-service
 # Required-Start: vboxdrv
 # Required-Stop:  vboxdrv
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # Description:    VirtualBox autostart service
 ### END INIT INFO
Index: VirtualBox-6.0.0/src/VBox/Installer/linux/vboxballoonctrl-service.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/Installer/linux/vboxballoonctrl-service.sh
+++ VirtualBox-6.0.0/src/VBox/Installer/linux/vboxballoonctrl-service.sh
@@ -23,7 +23,7 @@
 # Provides:       vboxballoonctrl-service
 # Required-Start: vboxdrv
 # Required-Stop:  vboxdrv
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # Description:    VirtualBox watchdog daemon
 ### END INIT INFO
Index: VirtualBox-6.0.0/src/VBox/ValidationKit/testboxscript/linux/testboxscript-service.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/ValidationKit/testboxscript/linux/testboxscript-service.sh
+++ VirtualBox-6.0.0/src/VBox/ValidationKit/testboxscript/linux/testboxscript-service.sh
@@ -31,7 +31,7 @@
 # Provides:       testboxscript-service
 # Required-Start: $network
 # Required-Stop:
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # Description:    TestBoxScript service
 ### END INIT INFO
Index: VirtualBox-6.0.0/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs-nat.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs-nat.sh
+++ VirtualBox-6.0.0/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs-nat.sh
@@ -31,7 +31,7 @@
 # Provides:       vboxtxs
 # Required-Start: $network
 # Required-Stop:
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # Description:    VirtualBox Test Execution Service
 ### END INIT INFO
Index: VirtualBox-6.0.0/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs.sh
===================================================================
--- VirtualBox-6.0.0.orig/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs.sh
+++ VirtualBox-6.0.0/src/VBox/ValidationKit/utils/TestExecServ/linux/vboxtxs.sh
@@ -31,7 +31,7 @@
 # Provides:       vboxtxs
 # Required-Start: $network
 # Required-Stop:
-# Default-Start:  2 3 4 5
+# Default-Start:  2 3 5
 # Default-Stop:   0 1 6
 # Description:    VirtualBox Test Execution Service
 ### END INIT INFO