1
0
forked from pool/virtualbox
virtualbox/fixes_for_5.5.patch
Larry Finger 999d9ff1ba Accepting request 792829 from home:lwfinger:branches:Virtualization
- Change default display type for openSUSE virtual machines. The default type
  has been VMSVGA; however, this display type fails to utilize driver vboxvideo.
  thus the display size is fixed. This problem is under investigation, but
  until a fix is found, the default is changed to VBoxVGA with file
  "add change_default_display.patch".
- Makefile in the kernel-host-source package has a typo bug fixed (boo#1168910)
  and a large number of warnings are fixed.

OBS-URL: https://build.opensuse.org/request/show/792829
OBS-URL: https://build.opensuse.org/package/show/Virtualization/virtualbox?expand=0&rev=545
2020-04-10 09:55:34 +00:00

796 lines
29 KiB
Diff

Index: VirtualBox-6.1.4/src/VBox/HostDrivers/linux/Makefile
===================================================================
--- VirtualBox-6.1.4.orig/src/VBox/HostDrivers/linux/Makefile
+++ VirtualBox-6.1.4/src/VBox/HostDrivers/linux/Makefile
@@ -35,9 +35,6 @@ endif
ifneq ($(wildcard $(CURDIR)/vboxnetadp/Makefile),)
obj-m += vboxnetadp/
endif
-ifneq ($(wildcard $(CURDIR)/vboxpci/Makefile),)
- obj-m += vboxpci/
-endif
else # ! KERNELRELEASE
@@ -45,10 +42,11 @@ else # ! KERNELRELEASE
KBUILD_VERBOSE ?=
KERN_VER ?= $(shell uname -r)
-.PHONY: all install clean check unload load vboxdrv vboxnetflt vboxnetadp \
- vboxpci
+PWD ?= $(shell pwd)
+
+.PHONY: all install clean check unload load vboxdrv vboxnetflt vboxnetadp
-all: vboxdrv vboxnetflt vboxnetadp vboxpci
+all: vboxdrv vboxnetflt vboxnetadp
# We want to build on Linux 2.6.18 and later kernels.
ifneq ($(filter-out 1.% 2.0.% 2.1.% 2.2.% 2.3.% 2.4.% 2.5.%,$(KERN_VER)),)
@@ -61,55 +59,38 @@ vboxdrv:
vboxnetflt: vboxdrv
@if [ -d vboxnetflt ]; then \
- if [ -f vboxdrv/Module.symvers ]; then \
- cp vboxdrv/Module.symvers vboxnetflt; \
- fi; \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxnetflt/Module.symvers; \
echo "=== Building 'vboxnetflt' module ==="; \
- $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxnetflt/Module.symvers) -C vboxnetflt || exit 1; \
+ $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxdrv/Module.symvers) -C vboxnetflt || exit 1; \
cp vboxnetflt/vboxnetflt.ko .; \
echo; \
fi
vboxnetadp: vboxdrv
@if [ -d vboxnetadp ]; then \
- if [ -f vboxdrv/Module.symvers ]; then \
- cp vboxdrv/Module.symvers vboxnetadp; \
- fi; \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxnetadp/Module.symvers; \
echo "=== Building 'vboxnetadp' module ==="; \
- $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxnetadp/Module.symvers) -C vboxnetadp || exit 1; \
+ $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxdrv/Module.symvers) -C vboxnetadp || exit 1; \
cp vboxnetadp/vboxnetadp.ko .; \
echo; \
fi
-vboxpci: vboxdrv
- @if [ -d vboxpci ]; then \
- if [ -f vboxdrv/Module.symvers ]; then \
- cp vboxdrv/Module.symvers vboxpci; \
- fi; \
- echo "=== Building 'vboxpci' module ==="; \
- $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxpci/Module.symvers) -C vboxpci || exit 1; \
- cp vboxpci/vboxpci.ko .; \
- echo; \
- fi
-
install:
@$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxdrv install
@if [ -d vboxnetflt ]; then \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxnetflt/Module.symvers; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxnetflt install; \
fi
@if [ -d vboxnetadp ]; then \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxnetadp/Module.symvers; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxnetadp install; \
fi
- @if [ -d vboxpci ]; then \
- $(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxpci install; \
- fi
else
vboxdrv:
vboxnetflt:
vboxnetadp:
-vboxpci:
install:
endif
@@ -122,16 +103,13 @@ clean:
@if [ -d vboxnetadp ]; then \
$(MAKE) -C vboxnetadp clean; \
fi
- @if [ -d vboxpci ]; then \
- $(MAKE) -C vboxpci clean; \
- fi
- rm -f vboxdrv.ko vboxnetflt.ko vboxnetadp.ko vboxpci.ko
+ rm -f vboxdrv.ko vboxnetflt.ko vboxnetadp.ko
check:
@$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxdrv check
unload:
- @for module in vboxpci vboxnetadp vboxnetflt vboxdrv; do \
+ @for module in vboxnetadp vboxnetflt vboxdrv; do \
if grep "^$$module " /proc/modules >/dev/null; then \
echo "Removing previously installed $$module module"; \
/sbin/rmmod $$module; \
@@ -139,7 +117,7 @@ unload:
done
load: unload
- @for module in vboxdrv vboxnetflt vboxnetadp vboxpci; do \
+ @for module in vboxdrv vboxnetflt vboxnetadp; do \
if test -f $$module.ko; then \
echo "Installing $$module module"; \
/sbin/insmod $$module.ko; \
Index: VirtualBox-6.1.4/src/VBox/Additions/linux/Makefile
===================================================================
--- VirtualBox-6.1.4.orig/src/VBox/Additions/linux/Makefile
+++ VirtualBox-6.1.4/src/VBox/Additions/linux/Makefile
@@ -24,6 +24,7 @@ obj-m = vboxguest/ vboxsf/ vboxvideo/
else # ! KERNELRELEASE
KBUILD_VERBOSE =
+PWD ?= $(shell pwd)
ifeq ($(KBUILD_VERBOSE),)
VBOX_QUIET := @
VBOX_QUIET_SH := @
@@ -49,6 +50,7 @@ vboxsf: vboxguest
if [ -f vboxguest/Module.symvers ]; then \
cp vboxguest/Module.symvers vboxsf; \
fi; \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxsf/Module.symvers; \
echo "=== Building 'vboxsf' module ==="; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxsf/Module.symvers) -C vboxsf || exit 1; \
if [ -f vboxsf/vboxsf.ko ]; then \
@@ -64,6 +66,7 @@ vboxvideo:
if [ -f vboxguest/Module.symvers ]; then \
cp vboxguest/Module.symvers vboxvideo; \
fi; \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxvideo/Module.symvers; \
echo "=== Building 'vboxvideo' module ==="; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) KBUILD_EXTRA_SYMBOLS=$(abspath vboxvideo/Module.symvers) -C vboxvideo || exit 1; \
if [ -f vboxvideo/vboxvideo.ko ]; then \
@@ -77,9 +80,11 @@ vboxvideo:
install:
$(VBOX_QUIET)$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxguest install
$(VBOX_QUIET_SH)if [ -d vboxsf ]; then \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxsf/Module.symvers; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxsf install; \
fi
$(VBOX_QUIET_SH)if [ -d vboxvideo ]; then \
+ export KBUILD_EXTRA_SYMBOLS=${PWD}/vboxvideo/Module.symvers; \
$(MAKE) KBUILD_VERBOSE=$(KBUILD_VERBOSE) -C vboxvideo install; \
fi
Index: VirtualBox-6.1.4/include/iprt/x86.h
===================================================================
--- VirtualBox-6.1.4.orig/include/iprt/x86.h
+++ VirtualBox-6.1.4/include/iprt/x86.h
@@ -840,37 +840,59 @@ typedef const X86CPUIDFEATEDX *PCX86CPUI
* reserved flags.
* @{ */
/** Bit 0 - PE - Protection Enabled */
+#ifndef X86_CR0_PE
#define X86_CR0_PE RT_BIT_32(0)
+#endif
#define X86_CR0_PROTECTION_ENABLE RT_BIT_32(0)
/** Bit 1 - MP - Monitor Coprocessor */
+#ifndef X86_CR0_MP
#define X86_CR0_MP RT_BIT_32(1)
+#endif
#define X86_CR0_MONITOR_COPROCESSOR RT_BIT_32(1)
/** Bit 2 - EM - Emulation. */
+#ifndef X86_CR0_EM
#define X86_CR0_EM RT_BIT_32(2)
+#endif
#define X86_CR0_EMULATE_FPU RT_BIT_32(2)
/** Bit 3 - TS - Task Switch. */
+#ifndef X86_CR0_TS
#define X86_CR0_TS RT_BIT_32(3)
+#endif
#define X86_CR0_TASK_SWITCH RT_BIT_32(3)
/** Bit 4 - ET - Extension flag. (386, 'hardcoded' to 1 on 486+) */
+#ifndef X86_CR0_ET
#define X86_CR0_ET RT_BIT_32(4)
+#endif
#define X86_CR0_EXTENSION_TYPE RT_BIT_32(4)
/** Bit 5 - NE - Numeric error (486+). */
+#ifndef X86_CR0_NE
#define X86_CR0_NE RT_BIT_32(5)
+#endif
#define X86_CR0_NUMERIC_ERROR RT_BIT_32(5)
/** Bit 16 - WP - Write Protect (486+). */
+#ifndef X86_CR0_WP
#define X86_CR0_WP RT_BIT_32(16)
+#endif
#define X86_CR0_WRITE_PROTECT RT_BIT_32(16)
/** Bit 18 - AM - Alignment Mask (486+). */
+#ifndef X86_CR0_AM
#define X86_CR0_AM RT_BIT_32(18)
+#endif
#define X86_CR0_ALIGMENT_MASK RT_BIT_32(18)
/** Bit 29 - NW - Not Write-though (486+). */
+#ifndef X86_CR0_NW
#define X86_CR0_NW RT_BIT_32(29)
+#endif
#define X86_CR0_NOT_WRITE_THROUGH RT_BIT_32(29)
/** Bit 30 - WP - Cache Disable (486+). */
+#ifndef X86_CR0_CD
#define X86_CR0_CD RT_BIT_32(30)
+#endif
#define X86_CR0_CACHE_DISABLE RT_BIT_32(30)
/** Bit 31 - PG - Paging. */
+#ifndef X86_CR0_PG
#define X86_CR0_PG RT_BIT_32(31)
+#endif
#define X86_CR0_PAGING RT_BIT_32(31)
#define X86_CR0_BIT_PG 31 /**< Bit number of X86_CR0_PG */
/** @} */
@@ -879,9 +901,13 @@ typedef const X86CPUIDFEATEDX *PCX86CPUI
/** @name CR3
* @{ */
/** Bit 3 - PWT - Page-level Writes Transparent. */
+#ifndef X86_CR3_PWT
#define X86_CR3_PWT RT_BIT_32(3)
+#endif
/** Bit 4 - PCD - Page-level Cache Disable. */
+#ifndef X86_CR3_PCD
#define X86_CR3_PCD RT_BIT_32(4)
+#endif
/** Bits 12-31 - - Page directory page number. */
#define X86_CR3_PAGE_MASK (0xfffff000)
/** Bits 5-31 - - PAE Page directory page number. */
@@ -894,46 +920,84 @@ typedef const X86CPUIDFEATEDX *PCX86CPUI
/** @name CR4
* @{ */
/** Bit 0 - VME - Virtual-8086 Mode Extensions. */
+#ifndef X86_CR4_VME
#define X86_CR4_VME RT_BIT_32(0)
+#endif
/** Bit 1 - PVI - Protected-Mode Virtual Interrupts. */
+#ifndef X86_CR4_PVI
#define X86_CR4_PVI RT_BIT_32(1)
+#endif
/** Bit 2 - TSD - Time Stamp Disable. */
+#ifndef X86_CR4_TSD
#define X86_CR4_TSD RT_BIT_32(2)
+#endif
/** Bit 3 - DE - Debugging Extensions. */
+#ifndef X86_CR4_DE
#define X86_CR4_DE RT_BIT_32(3)
+#endif
/** Bit 4 - PSE - Page Size Extension. */
+#ifndef X86_CR4_PSE
#define X86_CR4_PSE RT_BIT_32(4)
+#endif
/** Bit 5 - PAE - Physical Address Extension. */
+#ifndef X86_CR4_PAE
#define X86_CR4_PAE RT_BIT_32(5)
+#endif
/** Bit 6 - MCE - Machine-Check Enable. */
+#ifndef X86_CR4_MCE
#define X86_CR4_MCE RT_BIT_32(6)
+#endif
/** Bit 7 - PGE - Page Global Enable. */
+#ifndef X86_CR4_PGE
#define X86_CR4_PGE RT_BIT_32(7)
+#endif
/** Bit 8 - PCE - Performance-Monitoring Counter Enable. */
+#ifndef X86_CR4_PCE
#define X86_CR4_PCE RT_BIT_32(8)
+#endif
/** Bit 9 - OSFXSR - Operating System Support for FXSAVE and FXRSTORE instructions. */
+#ifndef X86_CR4_OSFXSR
#define X86_CR4_OSFXSR RT_BIT_32(9)
+#endif
/** Bit 10 - OSXMMEEXCPT - Operating System Support for Unmasked SIMD Floating-Point Exceptions. */
#define X86_CR4_OSXMMEEXCPT RT_BIT_32(10)
/** Bit 11 - UMIP - User-Mode Instruction Prevention. */
+#ifndef X86_CR4_UMIP
#define X86_CR4_UMIP RT_BIT_32(11)
+#endif
/** Bit 13 - VMXE - VMX mode is enabled. */
+#ifndef X86_CR4_VMXE
#define X86_CR4_VMXE RT_BIT_32(13)
+#endif
/** Bit 14 - SMXE - Safer Mode Extensions Enabled. */
+#ifndef X86_CR4_SMXE
#define X86_CR4_SMXE RT_BIT_32(14)
+#endif
/** Bit 16 - FSGSBASE - Read/write FSGSBASE instructions Enable. */
+#ifndef X86_CR4_FSGSBASE
#define X86_CR4_FSGSBASE RT_BIT_32(16)
+#endif
/** Bit 17 - PCIDE - Process-Context Identifiers Enabled. */
+#ifndef X86_CR4_PCIDE
#define X86_CR4_PCIDE RT_BIT_32(17)
+#endif
/** Bit 18 - OSXSAVE - Operating System Support for XSAVE and processor
* extended states. */
+#ifndef X86_CR4_OSXSAVE
#define X86_CR4_OSXSAVE RT_BIT_32(18)
+#endif
/** Bit 20 - SMEP - Supervisor-mode Execution Prevention enabled. */
+#ifndef X86_CR4_SMEP
#define X86_CR4_SMEP RT_BIT_32(20)
+#endif
/** Bit 21 - SMAP - Supervisor-mode Access Prevention enabled. */
+#ifndef X86_CR4_SMAP
#define X86_CR4_SMAP RT_BIT_32(21)
+#endif
/** Bit 22 - PKE - Protection Key Enable. */
+#ifndef X86_CR4_PKE
#define X86_CR4_PKE RT_BIT_32(22)
+#endif
/** Bit 23 - CET - Control-flow Enhancement Technology enabled. */
#define X86_CR4_CET RT_BIT_32(23)
/** @} */
@@ -1147,12 +1211,16 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
/** Machine check type register (P5). */
#define MSR_P5_MC_TYPE UINT32_C(0x00000001)
/** Time Stamp Counter. */
+#ifndef MSR_IA32_TSC
#define MSR_IA32_TSC 0x10
+#endif
#define MSR_IA32_CESR UINT32_C(0x00000011)
#define MSR_IA32_CTR0 UINT32_C(0x00000012)
#define MSR_IA32_CTR1 UINT32_C(0x00000013)
+#ifndef MSR_IA32_PLATFORM_ID
#define MSR_IA32_PLATFORM_ID 0x17
+#endif
#ifndef MSR_IA32_APICBASE /* qemu cpu.h kludge */
# define MSR_IA32_APICBASE 0x1b
@@ -1178,7 +1246,9 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_CORE_THREAD_COUNT 0x35
/** CPU Feature control. */
+#ifndef MSR_IA32_FEATURE_CONTROL
#define MSR_IA32_FEATURE_CONTROL 0x3A
+#endif
/** Feature control - Lock MSR from writes (R/W0). */
#define MSR_IA32_FEATURE_CONTROL_LOCK RT_BIT_64(0)
/** Feature control - Enable VMX inside SMX operation (R/WL). */
@@ -1203,11 +1273,15 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_FEATURE_CONTROL_LMCE RT_BIT_64(20)
/** Per-processor TSC adjust MSR. */
+#ifndef MSR_IA32_TSC_ADJUST
#define MSR_IA32_TSC_ADJUST 0x3B
+#endif
/** Spectre control register.
* Logical processor scope. Reset value 0, unaffected by SIPI & INIT. */
+#ifndef MSR_IA32_SPEC_CTRL
#define MSR_IA32_SPEC_CTRL 0x48
+#endif
/** IBRS - Indirect branch restricted speculation. */
#define MSR_IA32_SPEC_CTRL_F_IBRS RT_BIT_32(0)
/** STIBP - Single thread indirect branch predictors. */
@@ -1215,7 +1289,9 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
/** Prediction command register.
* Write only, logical processor scope, no state since write only. */
+#ifndef MSR_IA32_PRED_CMD
#define MSR_IA32_PRED_CMD 0x49
+#endif
/** IBPB - Indirect branch prediction barrie when written as 1. */
#define MSR_IA32_PRED_CMD_F_IBPB RT_BIT_32(0)
@@ -1226,7 +1302,9 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_BIOS_SIGN_ID 0x8B
/** SMM monitor control. */
+#ifndef MSR_IA32_SMM_MONITOR_CTL
#define MSR_IA32_SMM_MONITOR_CTL 0x9B
+#endif
/** SMM control - Valid. */
#define MSR_IA32_SMM_MONITOR_VALID RT_BIT_64(0)
/** SMM control - VMXOFF unblocks SMI. */
@@ -1235,10 +1313,14 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_SMM_MONITOR_MSGEG_PHYSADDR(a) (((a) >> 12) & UINT64_C(0xfffff))
/** SMBASE - Base address of SMRANGE image (Read-only, SMM only). */
+#ifndef MSR_IA32_SMBASE
#define MSR_IA32_SMBASE 0x9E
+#endif
/** General performance counter no. 0. */
+#ifndef MSR_IA32_PMC0
#define MSR_IA32_PMC0 0xC1
+#endif
/** General performance counter no. 1. */
#define MSR_IA32_PMC1 0xC2
/** General performance counter no. 2. */
@@ -1261,18 +1343,26 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_FSB_CLOCK_STS 0xCD
/** C-State configuration control. Intel specific: Nehalem, Sandy Bridge. */
+#ifndef MSR_PKG_CST_CONFIG_CONTROL
#define MSR_PKG_CST_CONFIG_CONTROL UINT32_C(0x000000e2)
+#endif
/** C0 Maximum Frequency Clock Count */
+#ifndef MSR_IA32_MPERF
#define MSR_IA32_MPERF 0xE7
+#endif
/** C0 Actual Frequency Clock Count */
+#ifndef MSR_IA32_APERF
#define MSR_IA32_APERF 0xE8
+#endif
/** MTRR Capabilities. */
#define MSR_IA32_MTRR_CAP 0xFE
/** Architecture capabilities (bugfixes). */
+#ifndef MSR_IA32_ARCH_CAPABILITIES
#define MSR_IA32_ARCH_CAPABILITIES UINT32_C(0x10a)
+#endif
/** CPU is no subject to meltdown problems. */
#define MSR_IA32_ARCH_CAP_F_RDCL_NO RT_BIT_32(0)
/** CPU has better IBRS and you can leave it on all the time. */
@@ -1286,7 +1376,9 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_ARCH_CAP_F_MDS_NO RT_BIT_32(4)
/** Flush command register. */
+#ifndef MSR_IA32_FLUSH_CMD
#define MSR_IA32_FLUSH_CMD UINT32_C(0x10b)
+#endif
/** Flush the level 1 data cache when this bit is written. */
#define MSR_IA32_FLUSH_CMD_F_L1D RT_BIT_32(0)
@@ -1307,14 +1399,20 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#endif
/** Machine Check Global Capabilities Register. */
+#ifndef MSR_IA32_MCG_CAP
#define MSR_IA32_MCG_CAP 0x179
+#endif
/** Machine Check Global Status Register. */
+#ifndef MSR_IA32_MCG_STATUS
#define MSR_IA32_MCG_STATUS 0x17A
+#endif
/** Machine Check Global Control Register. */
#define MSR_IA32_MCG_CTRL 0x17B
/** Page Attribute Table. */
+#ifndef MSR_IA32_CR_PAT
#define MSR_IA32_CR_PAT 0x277
+#endif
/** Default PAT MSR value on processor powerup / reset (see Intel spec. 11.12.4
* "Programming the PAT", AMD spec. 7.8.2 "PAT Indexing") */
#define MSR_IA32_CR_PAT_INIT_VAL UINT64_C(0x0007040600070406)
@@ -1333,36 +1431,58 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_FLEX_RATIO 0x194
/** Performance state value and starting with Intel core more.
* Apple uses the >=core features to determine TSC granularity on older CPUs. */
+#ifndef MSR_IA32_PERF_STATUS
#define MSR_IA32_PERF_STATUS 0x198
+#endif
+#ifndef MSR_IA32_PERF_CTL
#define MSR_IA32_PERF_CTL 0x199
+#endif
+#ifndef MSR_IA32_THERM_STATUS
#define MSR_IA32_THERM_STATUS 0x19c
+#endif
/** Offcore response event select registers. */
+#ifndef MSR_OFFCORE_RSP_0
#define MSR_OFFCORE_RSP_0 0x1a6
+#endif
+#ifndef MSR_OFFCORE_RSP_1
#define MSR_OFFCORE_RSP_1 0x1a7
+#endif
/** Enable misc. processor features (R/W). */
+#ifndef MSR_IA32_MISC_ENABLE
#define MSR_IA32_MISC_ENABLE 0x1A0
+#endif
/** Enable fast-strings feature (for REP MOVS and REP STORS). */
#define MSR_IA32_MISC_ENABLE_FAST_STRINGS RT_BIT_64(0)
/** Automatic Thermal Control Circuit Enable (R/W). */
+#ifndef MSR_IA32_MISC_ENABLE_TCC
#define MSR_IA32_MISC_ENABLE_TCC RT_BIT_64(3)
+#endif
/** Performance Monitoring Available (R). */
#define MSR_IA32_MISC_ENABLE_PERF_MON RT_BIT_64(7)
/** Branch Trace Storage Unavailable (R/O). */
+#ifndef MSR_IA32_MISC_ENABLE_BTS_UNAVAIL
#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL RT_BIT_64(11)
+#endif
/** Precise Event Based Sampling (PEBS) Unavailable (R/O). */
+#ifndef MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL
#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL RT_BIT_64(12)
+#endif
/** Enhanced Intel SpeedStep Technology Enable (R/W). */
#define MSR_IA32_MISC_ENABLE_SST_ENABLE RT_BIT_64(16)
/** If MONITOR/MWAIT is supported (R/W). */
#define MSR_IA32_MISC_ENABLE_MONITOR RT_BIT_64(18)
/** Limit CPUID Maxval to 3 leafs (R/W). */
+#ifndef MSR_IA32_MISC_ENABLE_LIMIT_CPUID
#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID RT_BIT_64(22)
+#endif
/** When set to 1, xTPR messages are disabled (R/W). */
#define MSR_IA32_MISC_ENABLE_XTPR_MSG_DISABLE RT_BIT_64(23)
/** When set to 1, the Execute Disable Bit feature (XD Bit) is disabled (R/W). */
+#ifndef MSR_IA32_MISC_ENABLE_XD_DISABLE
#define MSR_IA32_MISC_ENABLE_XD_DISABLE RT_BIT_64(34)
+#endif
/** Trace/Profile Resource Control (R/W) */
#define MSR_IA32_DEBUGCTL UINT32_C(0x000001d9)
@@ -1500,7 +1620,9 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
/** @} */
/** Intel TSX (Transactional Synchronization Extensions) control MSR. */
+#ifndef MSR_IA32_TSX_CTRL
#define MSR_IA32_TSX_CTRL 0x122
+#endif
/** Variable range MTRRs.
* @{ */
@@ -1550,89 +1672,167 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_IA32_PERF_GLOBAL_OVF_CTRL 0x390
/** Precise Event Based sampling (Intel only). */
+#ifndef MSR_IA32_PEBS_ENABLE
#define MSR_IA32_PEBS_ENABLE 0x3F1
+#endif
+#ifndef MSR_DRAM_POWER_LIMIT
#define MSR_IA32_MC0_CTL 0x400
+#endif
+#ifndef MSR_IA32_MC0_STATUS
#define MSR_IA32_MC0_STATUS 0x401
+#endif
/** Basic VMX information. */
+#ifndef MSR_IA32_VMX_BASIC
#define MSR_IA32_VMX_BASIC 0x480
+#endif
/** Allowed settings for pin-based VM execution controls. */
+#ifndef MSR_IA32_VMX_PINBASED_CTLS
#define MSR_IA32_VMX_PINBASED_CTLS 0x481
+#endif
/** Allowed settings for proc-based VM execution controls. */
+#ifndef MSR_IA32_VMX_PROCBASED_CTLS
#define MSR_IA32_VMX_PROCBASED_CTLS 0x482
+#endif
/** Allowed settings for the VM-exit controls. */
+#ifndef MSR_IA32_VMX_EXIT_CTLS
#define MSR_IA32_VMX_EXIT_CTLS 0x483
+#endif
/** Allowed settings for the VM-entry controls. */
+#ifndef MSR_IA32_VMX_ENTRY_CTLS
#define MSR_IA32_VMX_ENTRY_CTLS 0x484
+#endif
/** Misc VMX info. */
+#ifndef MSR_IA32_VMX_MISC
#define MSR_IA32_VMX_MISC 0x485
+#endif
/** Fixed cleared bits in CR0. */
+#ifndef MSR_IA32_VMX_CR0_FIXED0
#define MSR_IA32_VMX_CR0_FIXED0 0x486
+#endif
/** Fixed set bits in CR0. */
+#ifndef MSR_IA32_VMX_CR0_FIXED1
#define MSR_IA32_VMX_CR0_FIXED1 0x487
+#endif
/** Fixed cleared bits in CR4. */
+#ifndef MSR_IA32_VMX_CR4_FIXED0
#define MSR_IA32_VMX_CR4_FIXED0 0x488
+#endif
/** Fixed set bits in CR4. */
+#ifndef MSR_IA32_VMX_CR4_FIXED1
#define MSR_IA32_VMX_CR4_FIXED1 0x489
+#endif
/** Information for enumerating fields in the VMCS. */
+#ifndef MSR_IA32_VMX_VMCS_ENUM
#define MSR_IA32_VMX_VMCS_ENUM 0x48A
+#endif
/** Allowed settings for secondary proc-based VM execution controls */
+#ifndef MSR_IA32_VMX_PROCBASED_CTLS2
#define MSR_IA32_VMX_PROCBASED_CTLS2 0x48B
+#endif
/** EPT capabilities. */
+#ifndef MSR_IA32_VMX_EPT_VPID_CAP
#define MSR_IA32_VMX_EPT_VPID_CAP 0x48C
+#endif
/** Allowed settings of all pin-based VM execution controls. */
+#ifndef MSR_IA32_VMX_TRUE_PINBASED_CTLS
#define MSR_IA32_VMX_TRUE_PINBASED_CTLS 0x48D
+#endif
/** Allowed settings of all proc-based VM execution controls. */
+#ifndef MSR_IA32_VMX_TRUE_PROCBASED_CTLS
#define MSR_IA32_VMX_TRUE_PROCBASED_CTLS 0x48E
+#endif
/** Allowed settings of all VMX exit controls. */
+#ifndef MSR_IA32_VMX_TRUE_EXIT_CTLS
#define MSR_IA32_VMX_TRUE_EXIT_CTLS 0x48F
+#endif
/** Allowed settings of all VMX entry controls. */
+#ifndef MSR_IA32_VMX_TRUE_ENTRY_CTLS
#define MSR_IA32_VMX_TRUE_ENTRY_CTLS 0x490
+#endif
/** Allowed settings for the VM-function controls. */
+#ifndef MSR_IA32_VMX_VMFUNC
#define MSR_IA32_VMX_VMFUNC 0x491
+#endif
/** Intel PT - Enable and control for trace packet generation. */
+#ifndef MSR_IA32_RTIT_CTL
#define MSR_IA32_RTIT_CTL 0x570
+#endif
/** DS Save Area (R/W). */
+#ifndef MSR_IA32_DS_AREA
#define MSR_IA32_DS_AREA 0x600
+#endif
/** Running Average Power Limit (RAPL) power units. */
+#ifndef MSR_RAPL_POWER_UNIT
#define MSR_RAPL_POWER_UNIT 0x606
+#endif
/** Package C3 Interrupt Response Limit. */
+#ifndef MSR_PKGC3_IRTL
#define MSR_PKGC3_IRTL 0x60a
+#endif
/** Package C6/C7S Interrupt Response Limit 1. */
#define MSR_PKGC_IRTL1 0x60b
/** Package C6/C7S Interrupt Response Limit 2. */
#define MSR_PKGC_IRTL2 0x60c
/** Package C2 Residency Counter. */
+#ifndef MSR_PKG_C2_RESIDENCY
#define MSR_PKG_C2_RESIDENCY 0x60d
+#endif
/** PKG RAPL Power Limit Control. */
+#ifndef MSR_PKG_POWER_LIMIT
#define MSR_PKG_POWER_LIMIT 0x610
+#endif
/** PKG Energy Status. */
+#ifndef MSR_PKG_ENERGY_STATUS
#define MSR_PKG_ENERGY_STATUS 0x611
+#endif
/** PKG Perf Status. */
+#ifndef MSR_PKG_PERF_STATUS
#define MSR_PKG_PERF_STATUS 0x613
+#endif
/** PKG RAPL Parameters. */
+#ifndef MSR_PKG_POWER_INFO
#define MSR_PKG_POWER_INFO 0x614
+#endif
/** DRAM RAPL Power Limit Control. */
+#ifndef MSR_DRAM_POWER_LIMIT
#define MSR_DRAM_POWER_LIMIT 0x618
+#endif
/** DRAM Energy Status. */
+#ifndef MSR_DRAM_ENERGY_STATUS
#define MSR_DRAM_ENERGY_STATUS 0x619
+#endif
/** DRAM Performance Throttling Status. */
+#ifndef MSR_DRAM_PERF_STATUS
#define MSR_DRAM_PERF_STATUS 0x61b
+#endif
/** DRAM RAPL Parameters. */
+#ifndef MSR_DRAM_POWER_INFO
#define MSR_DRAM_POWER_INFO 0x61c
+#endif
/** Package C10 Residency Counter. */
+#ifndef MSR_PKG_C10_RESIDENCY
#define MSR_PKG_C10_RESIDENCY 0x632
+#endif
/** PP0 Energy Status. */
+#ifndef MSR_PP0_ENERGY_STATUS
#define MSR_PP0_ENERGY_STATUS 0x639
+#endif
/** PP1 Energy Status. */
+#ifndef MSR_PP1_ENERGY_STATUS
#define MSR_PP1_ENERGY_STATUS 0x641
+#endif
/** Turbo Activation Ratio. */
+#ifndef MSR_TURBO_ACTIVATION_RATIO
#define MSR_TURBO_ACTIVATION_RATIO 0x64c
+#endif
/** Core Performance Limit Reasons. */
+#ifndef MSR_CORE_PERF_LIMIT_REASONS
#define MSR_CORE_PERF_LIMIT_REASONS 0x64f
+#endif
/** X2APIC MSR range start. */
#define MSR_IA32_X2APIC_START 0x800
@@ -1767,23 +1967,47 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
/** The mask which give the SYSCALL EIP. */
#define MSR_K6_STAR_SYSCALL_EIP_MASK UINT32_C(0xffffffff)
/** K6 WHCR - Write Handling Control Register. */
+#ifndef MSR_K6_WHCR
#define MSR_K6_WHCR UINT32_C(0xc0000082)
+#endif
/** K6 UWCCR - UC/WC Cacheability Control Register. */
+#ifndef MSR_K6_UWCCR
#define MSR_K6_UWCCR UINT32_C(0xc0000085)
+#endif
/** K6 PSOR - Processor State Observability Register. */
+#ifndef MSR_K6_PSOR
#define MSR_K6_PSOR UINT32_C(0xc0000087)
+#endif
/** K6 PFIR - Page Flush/Invalidate Register. */
+#ifndef MSR_K6_PFIR
#define MSR_K6_PFIR UINT32_C(0xc0000088)
+#endif
/** Performance counter MSRs. (AMD only) */
+#ifndef MSR_K7_EVNTSEL0
#define MSR_K7_EVNTSEL0 UINT32_C(0xc0010000)
+#endif
+#ifndef MSR_K7_EVNTSEL1
#define MSR_K7_EVNTSEL1 UINT32_C(0xc0010001)
+#endif
+#ifndef MSR_K7_EVNTSEL2
#define MSR_K7_EVNTSEL2 UINT32_C(0xc0010002)
+#endif
+#ifndef MSR_K7_EVNTSEL3
#define MSR_K7_EVNTSEL3 UINT32_C(0xc0010003)
+#endif
+#ifndef MSR_K7_PERFCTR0
#define MSR_K7_PERFCTR0 UINT32_C(0xc0010004)
+#endif
+#ifndef MSR_K7_PERFCTR1
#define MSR_K7_PERFCTR1 UINT32_C(0xc0010005)
+#endif
+#ifndef MSR_K7_PERFCTR2
#define MSR_K7_PERFCTR2 UINT32_C(0xc0010006)
+#endif
+#ifndef MSR_K7_PERFCTR3
#define MSR_K7_PERFCTR3 UINT32_C(0xc0010007)
+#endif
/** K8 LSTAR - Long mode SYSCALL target (RIP). */
#define MSR_K8_LSTAR UINT32_C(0xc0000082)
@@ -1799,14 +2023,20 @@ AssertCompile(X86_DR7_ANY_RW_IO(UINT32_C
#define MSR_K8_KERNEL_GS_BASE UINT32_C(0xc0000102)
/** K8 TSC_AUX - Used with RDTSCP. */
#define MSR_K8_TSC_AUX UINT32_C(0xc0000103)
+#ifndef MSR_K8_SYSCFG
#define MSR_K8_SYSCFG UINT32_C(0xc0010010)
+#endif
#define MSR_K8_HWCR UINT32_C(0xc0010015)
#define MSR_K8_IORRBASE0 UINT32_C(0xc0010016)
#define MSR_K8_IORRMASK0 UINT32_C(0xc0010017)
#define MSR_K8_IORRBASE1 UINT32_C(0xc0010018)
#define MSR_K8_IORRMASK1 UINT32_C(0xc0010019)
+#ifndef MSR_K8_TOP_MEM1
#define MSR_K8_TOP_MEM1 UINT32_C(0xc001001a)
+#endif
+#ifndef MSR_K8_TOP_MEM2
#define MSR_K8_TOP_MEM2 UINT32_C(0xc001001d)
+#endif
/** North bridge config? See BIOS & Kernel dev guides for
* details. */
#define MSR_K8_NB_CFG UINT32_C(0xc001001f)
Index: VirtualBox-6.1.4/include/VBox/vmm/hm_vmx.h
===================================================================
--- VirtualBox-6.1.4.orig/include/VBox/vmm/hm_vmx.h
+++ VirtualBox-6.1.4/include/VBox/vmm/hm_vmx.h
@@ -1473,7 +1473,9 @@ AssertCompileSize(VMXABORT, 4);
/** VMCS (and related regions) memory type - Uncacheable. */
#define VMX_BASIC_MEM_TYPE_UC 0
/** VMCS (and related regions) memory type - Write back. */
+#ifndef VMX_BASIC_MEM_TYPE_WB
#define VMX_BASIC_MEM_TYPE_WB 6
+#endif
/** Width of physical addresses used for VMCS and associated memory regions
* (1=32-bit, 0=processor's physical address width). */
#define VMX_BASIC_PHYSADDR_WIDTH_32BIT RT_BIT_64(48)
Index: VirtualBox-6.1.4/src/VBox/Additions/linux/drm/vbox_drv.h
===================================================================
--- VirtualBox-6.1.4.orig/src/VBox/Additions/linux/drm/vbox_drv.h
+++ VirtualBox-6.1.4/src/VBox/Additions/linux/drm/vbox_drv.h
@@ -83,10 +83,8 @@
# endif
#endif
-#if defined(CONFIG_SUSE_VERSION)
-# if CONFIG_SUSE_VERSION == 15 && CONFIG_SUSE_PATCHLEVEL == 1
-# define OPENSUSE_151
-# endif
+#if defined(CONFIG_SUSE_VERSION) && CONFIG_SUSE_VERSION == 15 && CONFIG_SUSE_PATCHLEVEL == 1
+# define OPENSUSE_151
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0) || defined(RHEL_71)