(function (root, data) {
    var loaded, module;

    /* Load into AMD if desired */
    if (typeof define === 'function' && define.amd) {
        define(data);
        loaded = true;
    }

    /* Load into Cockpit locale */
    if (typeof cockpit === 'object') {
        cockpit.locale(data)
        loaded = true;
    }

    if (!loaded)
        root.po = data;

/* The syntax of this line is important  by po2json */
}(this, {
 "": {'plural-forms':function(n) {
var nplurals, plural;
nplurals=2; plural=n != 1;
return plural;
},
  "language": "es",
  "x-generator": "Weblate 4.0.3"
 },
 " Attaching it will make this disk shareable for every VM using it.": [
  null,
  " Al añadirlo, este disco será compartido por todas las VM que lo utilicen."
 ],
 "$0 Network": [
  null,
  "$0 Red"
 ],
 "$0 exited with code $1": [
  null,
  "$0 finalizó con el código $1"
 ],
 "$0 failed": [
  null,
  "$0 falló"
 ],
 "$0 is available for most operating systems. To install it, search for it in GNOME Software or run the following:": [
  null,
  "$0 está disponible para muchos sistemas operativos. Para instalarlo, búscalo en \"GNOME Software\" o ejecuta el siguiente comando:"
 ],
 "$0 killed with signal $1": [
  null,
  "$0 terminado con señal $1"
 ],
 "Access": [
  null,
  "Acceso"
 ],
 "Activate": [
  null,
  "Activar"
 ],
 "Add": [
  null,
  "Añadir"
 ],
 "Add Disk": [
  null,
  "Añadir disco"
 ],
 "Add Network Interface": [
  null,
  "Añadir una interfaz de red"
 ],
 "Add Virtual Network Interface": [
  null,
  "Añadir una interfaz de red virtual"
 ],
 "Additional": [
  null,
  "Adicional"
 ],
 "Address": [
  null,
  "Dirección"
 ],
 "Address not within subnet": [
  null,
  "La dirección no está dentro de una subred"
 ],
 "Address:": [
  null,
  "Dirección:"
 ],
 "Always attach": [
  null,
  "Siempre adjunto"
 ],
 "Apply": [
  null,
  "Aplicar"
 ],
 "Automatic": [
  null,
  "Automático"
 ],
 "Automatically start libvirt on boot": [
  null,
  "Iniciar automáticamente libvirt en el arranque"
 ],
 "Autostart": [
  null,
  "Autoinicio"
 ],
 "Available": [
  null,
  "Disponible"
 ],
 "Boot Order": [
  null,
  "Orden de arranque"
 ],
 "Boot order settings could not be saved": [
  null,
  "La configuración del orden de arranque no se pudo guardar"
 ],
 "Bus": [
  null,
  "Bus"
 ],
 "CPU Type": [
  null,
  "Tipo de CPU"
 ],
 "Cache": [
  null,
  "Caché"
 ],
 "Cancel": [
  null,
  "Cancelar"
 ],
 "Cannot forward login credentials": [
  null,
  "No se pueden re-enviar las credenciales de acceso"
 ],
 "Capacity": [
  null,
  "Capacidad"
 ],
 "Change Firmware": [
  null,
  "Cambiar el firmware"
 ],
 "Changes will take effect after shutting down the VM": [
  null,
  "Los cambios entrarán en vigor después de apagar la máquina virtual"
 ],
 "Choose an operating system": [
  null,
  "Escoge un sistema operativo"
 ],
 "Clicking \"Launch Remote Viewer\" will download a .vv file and launch $0.": [
  null,
  "Haciendo clic \"Lanzar visor remoto\" hará que se descargue un archivo con la extensión .vv y también se ejecutará $0."
 ],
 "Cockpit could not contact the given host.": [
  null,
  "Cockpit no se pudo conectar con el anfitrión especificado."
 ],
 "Cockpit is not compatible with the software on the system.": [
  null,
  "Cockpit no es compatible con el software del sistema."
 ],
 "Cockpit is not installed on the system.": [
  null,
  "Cockpit no está instalado en el sistema."
 ],
 "Confirm this action": [
  null,
  "Confirme esta acción"
 ],
 "Connect": [
  null,
  "Conectar"
 ],
 "Connect with any $0 viewer application.": [
  null,
  "Conectar con algún visor de aplicación $0."
 ],
 "Connect with any SPICE or VNC viewer application.": [
  null,
  "Conectar con algún visor de aplicación SPICE o VNC."
 ],
 "Connecting to Virtualization Service": [
  null,
  "Conectándose al servicio de virtualización"
 ],
 "Connection": [
  null,
  "Conexión"
 ],
 "Connection has timed out.": [
  null,
  "La conexión ha caducado."
 ],
 "Console Type": [
  null,
  "Tipo de consola"
 ],
 "Consoles": [
  null,
  "Consolas"
 ],
 "Copy": [
  null,
  "Copiar"
 ],
 "Cores per socket": [
  null,
  "Núcleos por socket"
 ],
 "Create": [
  null,
  "Crear"
 ],
 "Create New": [
  null,
  "Crear"
 ],
 "Create New Virtual Machine": [
  null,
  "Crear una máquina virtual"
 ],
 "Create New Volume": [
  null,
  "Crear un volumen"
 ],
 "Create Storage Pool": [
  null,
  "Crear un grupo de almacenamiento"
 ],
 "Create Storage Volume": [
  null,
  "Crear un volumen de almacenamiento"
 ],
 "Create VM": [
  null,
  "Crear una MV"
 ],
 "Create Virtual Network": [
  null,
  "Crear una red virtual"
 ],
 "Create Volume": [
  null,
  "Crear un volumen"
 ],
 "Creation of VM $0 failed": [
  null,
  "La creación de la MV $0 falló"
 ],
 "Ctrl+Alt+$0": [
  null,
  "Ctrl+Alt+$0"
 ],
 "Ctrl+Insert": [
  null,
  "Ctrl+Insert"
 ],
 "Current Allocation": [
  null,
  "Asignación actual"
 ],
 "Custom firmware: $0": [
  null,
  "Firmware específico: $0"
 ],
 "DHCP Range": [
  null,
  "Rango DHCP"
 ],
 "Deactivate": [
  null,
  "Desactivar"
 ],
 "Delete": [
  null,
  "Eliminar"
 ],
 "Delete $0 volume": [
  "Delete $0 volumes",
  "Eliminar $0 volumen",
  "Eliminar $0 volúmenes"
 ],
 "Delete Content": [
  null,
  "Eliminar contenido"
 ],
 "Delete Storage Pool $0": [
  null,
  "Eliminar el grupo de almacenamiento $0"
 ],
 "Delete associated storage files:": [
  null,
  "Eliminar archivos de almacenamiento asociados:"
 ],
 "Delete the Volumes inside this Pool": [
  null,
  "Eliminar los volúmenes que están dentro de este grupo"
 ],
 "Deleting an inactive Storage Pool will only undefine the Pool. Its content will not be deleted.": [
  null,
  "Eliminar un grupo de almacenamiento solo borrará la información que no esté definida. Su contenido no se eliminará."
 ],
 "Detach the disks using this pool from any VMs before attempting deletion.": [
  null,
  "Desmontando los discos utilizando este grupo desde cualquiera de las MVs antes de intentar eliminarlo."
 ],
 "Device": [
  null,
  "Dispositivo"
 ],
 "Disconnect": [
  null,
  "Desconectar"
 ],
 "Disconnected from serial console. Click the Connect button.": [
  null,
  "Desconectado desde la consola serial. Haga clic en el botón de conectar."
 ],
 "Disk $0 fail to get detached from VM $1": [
  null,
  "El disco $0 no se desconecta de la máquina virtual $1"
 ],
 "Disk failed to be attached": [
  null,
  "El disco no se pudo montar"
 ],
 "Disk failed to be created": [
  null,
  "El disco no se pudo crear"
 ],
 "Disk settings could not be saved": [
  null,
  "Las configuraciones del disco no se pudieron guardar"
 ],
 "Disks": [
  null,
  "Discos"
 ],
 "Download an OS": [
  null,
  "Descargar un SO"
 ],
 "Download the MSI from $0": [
  null,
  "Descargar el MSI desde $0"
 ],
 "Edit": [
  null,
  "Editar"
 ],
 "Emulated Machine": [
  null,
  "Máquina emulada"
 ],
 "End": [
  null,
  "Terminar"
 ],
 "End should not be empty": [
  null,
  "Terminar no debe de estar vacío"
 ],
 "Existing disk image on host's file system": [
  null,
  "Existe una imagen de disco en el sistema de archivos del anfitrión"
 ],
 "Failed to change firmware": [
  null,
  "Falló al cambiar el firmware"
 ],
 "Failed to fetch the IP addresses of the interfaces present in $0": [
  null,
  "Falló al recuperar la dirección IP de las interfaces presentes en $0"
 ],
 "Failed to send key Ctrl+Alt+$0 to VM $1": [
  null,
  "Falló al enviar las teclas Ctrl+Alt+$0 a la VM $1"
 ],
 "Fewer than the maximum number of virtual CPUs should be enabled.": [
  null,
  "Deben habilitarse menos CPU virtuales de las permitidas."
 ],
 "File": [
  null,
  "Archivo"
 ],
 "Filesystem Directory": [
  null,
  "Directorio del sistema de archivos"
 ],
 "Firmware": [
  null,
  "Firmware"
 ],
 "Force Restart": [
  null,
  "Forzar el reinicio"
 ],
 "Force Shut Down": [
  null,
  "Forzar el apagado"
 ],
 "Format": [
  null,
  "Formato"
 ],
 "Forward Mode": [
  null,
  "Modo de redireccionamiento"
 ],
 "Forwarding mode": [
  null,
  "Modo de reenvío"
 ],
 "General": [
  null,
  "General"
 ],
 "Generate automatically": [
  null,
  "Generado automáticamente"
 ],
 "GiB": [
  null,
  "GiB"
 ],
 "Graphics Console (VNC)": [
  null,
  "Consola gráfica (VNC)"
 ],
 "Graphics Console in Desktop Viewer": [
  null,
  "Consola gráfica en visualizador de escritorio"
 ],
 "Hide Additional Options": [
  null,
  "Ocultar opciones adicionales"
 ],
 "Host": [
  null,
  "Anfitrión"
 ],
 "Host Device": [
  null,
  "Dispositivo anfitrión"
 ],
 "Host Name": [
  null,
  "Nombre del anfitrión"
 ],
 "Host key is incorrect": [
  null,
  "La tecla del anfitrión es incorrecta"
 ],
 "Host should not be empty": [
  null,
  "El anfitrión no debe estar vacío"
 ],
 "Hypervisor Details": [
  null,
  "Detalles del hipervisor"
 ],
 "IP Address": [
  null,
  "Dirección IP"
 ],
 "IP Configuration": [
  null,
  "Configuración de la IP"
 ],
 "IPv4 Address": [
  null,
  "Dirección IPv4"
 ],
 "IPv4 Network": [
  null,
  "Red IPv4"
 ],
 "IPv4 Network should not be empty": [
  null,
  "La red IPv4 no debería estar vacía"
 ],
 "IPv4 and IPv6": [
  null,
  "IPv4 e IPv6"
 ],
 "IPv4 only": [
  null,
  "Solo IPv4"
 ],
 "IPv6 Address": [
  null,
  "Dirección IPv6"
 ],
 "IPv6 Network": [
  null,
  "Red IPv6"
 ],
 "IPv6 Network should not be empty": [
  null,
  "La red IPv6 no debería estar vacía"
 ],
 "IPv6 only": [
  null,
  "Solo IPv6"
 ],
 "Id": [
  null,
  "Id"
 ],
 "Immediately Start VM": [
  null,
  "Iniciar inmediatamente la MV"
 ],
 "Import": [
  null,
  "Importar"
 ],
 "Import A Virtual Machine": [
  null,
  "Importar una máquina virtual"
 ],
 "Import VM": [
  null,
  "Importar una MV"
 ],
 "In most configurations, macvtap does not work for host to guest network communication.": [
  null,
  "En muchas configuraciones, macvtap no funciona para un comunicación de red anfitrión-huésped."
 ],
 "Initiator": [
  null,
  "Iniciador"
 ],
 "Initiator IQN should not be empty": [
  null,
  "El iniciador IQN no debería estar vacío"
 ],
 "Install": [
  null,
  "Instalar"
 ],
 "Installation Source": [
  null,
  "Fuente de la instalación"
 ],
 "Installation Source must not be empty": [
  null,
  "La instalación del código no debería estar vacío"
 ],
 "Installation Type": [
  null,
  "Tipo de instalación"
 ],
 "Interface Type": [
  null,
  "Tipo de interfaz"
 ],
 "Internal error": [
  null,
  "Error interno"
 ],
 "Invalid IPv4 address": [
  null,
  "Dirección IPv4 inválida"
 ],
 "Invalid IPv4 mask or prefix length": [
  null,
  "Máscara o longitud del prefijo de IPv4 inválidos"
 ],
 "Invalid IPv6 address": [
  null,
  "Dirección IPv6 inválida"
 ],
 "Invalid IPv6 prefix": [
  null,
  "Prefijo IPv6 inválido"
 ],
 "Invalid filename": [
  null,
  "Nombre de fichero no válido"
 ],
 "Isolated Network": [
  null,
  "Red aislada"
 ],
 "LVM Volume Group": [
  null,
  "Grupo de volumen de LVM"
 ],
 "Launch Remote Viewer": [
  null,
  "Lanzar visualizador remoto"
 ],
 "Leave the password blank if you do not wish to have a root account created": [
  null,
  "Deje la contraseña en blanco si no quiere crear una cuenta de usuario root"
 ],
 "Leave the password blank if you do not wish to have a user account created": [
  null,
  "Deje la contraseña en blanco si no quiere tener una cuenta de usuario creada"
 ],
 "Libvirt did not detect any UEFI/OVMF firmware image installed on the host": [
  null,
  "Libvirt no detecta ninguna imagen de firmware de UEFI/OVMF instalada en el anfitrión"
 ],
 "Libvirt or hypervisor does not support UEFI": [
  null,
  "Libvirt o el hipervisor no soportan UEFI"
 ],
 "Loading Resources": [
  null,
  "Cargando recursos"
 ],
 "Loading...": [
  null,
  "Cargando..."
 ],
 "Local Install Media": [
  null,
  "Instalar desde un medio local"
 ],
 "Login failed": [
  null,
  "Inicio de sesión fallido"
 ],
 "MAC": [
  null,
  "MAC"
 ],
 "MAC Address": [
  null,
  "Dirección MAC"
 ],
 "Machine must be shut off before changing bus type": [
  null,
  "La máquina debe estar apagada antes de cambiar el tipo de bus"
 ],
 "Manual Connection": [
  null,
  "Conexión manual"
 ],
 "Mask or Prefix Length": [
  null,
  "Máscara o longitud del prefijo"
 ],
 "Mask or Prefix Length should not be empty": [
  null,
  "La máscara o la longitud del prefijo no debería estar vacío"
 ],
 "Maximum Allocation": [
  null,
  "Asignación máxima"
 ],
 "Maximum Transmission Unit": [
  null,
  "Unidad máxima de transmisión"
 ],
 "Maximum memory could not be saved": [
  null,
  "La memoria máxima no se pudo guardar"
 ],
 "Maximum number of virtual CPUs allocated for the guest OS, which must be between 1 and $0": [
  null,
  "Número máximo de CPU virtuales asignadas al SO invitado, entre 1 y $0"
 ],
 "Memory": [
  null,
  "Memoria"
 ],
 "Memory could not be saved": [
  null,
  "La memoria no se pudo guardar"
 ],
 "Memory must not be 0": [
  null,
  "La memoria no debe ser 0"
 ],
 "MiB": [
  null,
  "MiB"
 ],
 "Model": [
  null,
  "Modelo"
 ],
 "Model type": [
  null,
  "Tipo de modelo"
 ],
 "More Information": [
  null,
  "Más información"
 ],
 "NAT to $0": [
  null,
  "NAT para $0"
 ],
 "NIC $0 of VM $1 failed to change state": [
  null,
  "NIC $0 de la VM $1 falló al cambiar de estado"
 ],
 "Name": [
  null,
  "Nombre"
 ],
 "Name must not be empty": [
  null,
  "Nombre no debe estar vacío"
 ],
 "Name should not be empty": [
  null,
  "Nombre no debería estar vacío"
 ],
 "Name: ": [
  null,
  "Nombre: "
 ],
 "Netmask": [
  null,
  "Máscara de red"
 ],
 "Network": [
  "Networks",
  "Red",
  "Redes"
 ],
 "Network $0 failed to get activated": [
  null,
  "Falló al activarse la red $0"
 ],
 "Network $0 failed to get deactivated": [
  null,
  "Falló al activarse la red $0"
 ],
 "Network Boot (PXE)": [
  null,
  "Arranque vía red (PXE)"
 ],
 "Network Boot is available only when using System connection": [
  null,
  "El arranque por red solo está disponible cuando se usa una conexión de sistema"
 ],
 "Network File System": [
  null,
  "Sistema de archivos de red"
 ],
 "Network Interfaces": [
  null,
  "Interfaces de red"
 ],
 "Network Selection does not support PXE.": [
  null,
  "La selección de la red no soporta PXE."
 ],
 "Network interface settings could not be saved": [
  null,
  "No se pudo guardar la configuración de la interfaz de red"
 ],
 "Networks": [
  null,
  "Redes"
 ],
 "New Volume Name": [
  null,
  "Nuevo nombre para el volumen"
 ],
 "No Network Devices": [
  null,
  "No hay dispositivos de red"
 ],
 "No Storage": [
  null,
  "No hay almacenamiento"
 ],
 "No Storage Pools available": [
  null,
  "No hay grupos de almacenamiento disponibles"
 ],
 "No Storage Volumes defined for this Storage Pool": [
  null,
  "No hay volúmenes de almacenamiento definidos para este grupo de almacenamiento"
 ],
 "No VM is running or defined on this host": [
  null,
  "No hay ninguna MV en ejecución o definida en este anfitrión"
 ],
 "No Virtual Networks": [
  null,
  "No hay redes virtuales"
 ],
 "No boot device found": [
  null,
  "No se ha encontrado un dispositivo de arranque"
 ],
 "No console defined for this virtual machine.": [
  null,
  "No hay una consola definida para esta máquina virtual."
 ],
 "No disks defined for this VM": [
  null,
  "No se han definido discos para esta MV"
 ],
 "No network interfaces defined for this VM": [
  null,
  "No se han definido interfaces de red para esta MV"
 ],
 "No network is defined on this host": [
  null,
  "No hay una red definida en este anfitrión"
 ],
 "No networks available": [
  null,
  "No hay redes disponibles"
 ],
 "No storage pool is defined on this host": [
  null,
  "No hay un grupo de almacenamiento definido en este anfitrión"
 ],
 "Non-persistent network cannot be deleted. It ceases to exists when it's deactivated.": [
  null,
  "La red no persistente no se puede eliminar. Dejará de existir cuando está desactivado."
 ],
 "Non-persistent storage pool cannot be deleted. It ceases to exists when it's deactivated.": [
  null,
  "El grupo de almacenamiento no persistente no se puede eliminar. Dejará de existir cuando está desactivado."
 ],
 "None": [
  null,
  "Ninguno"
 ],
 "None (Isolated Network)": [
  null,
  "Ninguno (Red aislada)"
 ],
 "Not permitted to perform this action.": [
  null,
  "No está permitido llevar a cabo esta acción."
 ],
 "One or more selected volumes are used by domains. Detach the disks first to allow volume deletion.": [
  null,
  "Hay dominios que están utilizando uno o más volúmenes de los que se han seleccionado. Desmonte primero los discos para poder eliminar los volúmenes."
 ],
 "Only editable when the guest is shut off": [
  null,
  "Solo se puede editar cuando el huésped esté apagado"
 ],
 "Open": [
  null,
  "Abrir"
 ],
 "Operating System": [
  null,
  "Sistema operativo"
 ],
 "Operation is in progress": [
  null,
  "La operación está en progreso"
 ],
 "Overview": [
  null,
  "Visión global"
 ],
 "Password for $0": [
  null,
  "Contraseña para $0"
 ],
 "Password is not acceptable": [
  null,
  "La contraseña no es válida"
 ],
 "Password is too weak": [
  null,
  "La contraseña es muy débil"
 ],
 "Paste": [
  null,
  "Pegar"
 ],
 "Path": [
  null,
  "Ruta"
 ],
 "Path on host's filesystem": [
  null,
  "Ruta en el sistema de archivos del anfitrión"
 ],
 "Path to ISO file on host's file system": [
  null,
  "Ruta hacia la imagen ISO en el sistema de archivos del anfitrión"
 ],
 "Path to file": [
  null,
  "Ruta al fichero"
 ],
 "Pause": [
  null,
  "Pausar"
 ],
 "Persistence": [
  null,
  "Persistencia"
 ],
 "Persistent": [
  null,
  "Persistente"
 ],
 "Physical Disk Device": [
  null,
  "Dispositivo de disco físico"
 ],
 "Physical disk device on host": [
  null,
  "Dispositivo de disco físico en el anfitrión"
 ],
 "Please choose a storage pool": [
  null,
  "Por favor escoja un grupo de almacenamiento"
 ],
 "Please choose a volume": [
  null,
  "Por favor, seleccione un volumen"
 ],
 "Please enter new volume name": [
  null,
  "Introduzca el nuevo nombre del volumen"
 ],
 "Please enter new volume size": [
  null,
  "Introduzca el nuevo tamaño del volumen"
 ],
 "Please set a root or a user password": [
  null,
  "Por favor, asigne una contraseña al usuario root o a otro usuario"
 ],
 "Please start the virtual machine to access its console.": [
  null,
  "Por favor arranque la maquina virtual para acceder a su consola."
 ],
 "Plug": [
  null,
  "Enchufe"
 ],
 "Pool": [
  null,
  "Grupo"
 ],
 "Pool type doesn't support volume creation": [
  null,
  "El tipo de grupo no soporta la creación de volúmenes"
 ],
 "Pool's volumes are used by VMs ": [
  null,
  "Las MVs están utilizando un grupo de volúmenes: "
 ],
 "Port": [
  null,
  "Puerto"
 ],
 "Preferred number of sockets to expose to the guest.": [
  null,
  "Número preferido de sockets para exponerle al huésped."
 ],
 "Prefix": [
  null,
  "Prefijo"
 ],
 "Prefix Length": [
  null,
  "Longitud del prefijo"
 ],
 "Prefix Length should not be empty": [
  null,
  "La longitud del prefijo no debe estar vacía"
 ],
 "Private": [
  null,
  "Privado"
 ],
 "Product": [
  null,
  "Producto"
 ],
 "Profile": [
  null,
  "Perfil"
 ],
 "Protocol": [
  null,
  "Protocolo"
 ],
 "Read-only": [
  null,
  "Solo lectura"
 ],
 "Remote URL": [
  null,
  "URL remota"
 ],
 "Remove": [
  null,
  "Eliminar"
 ],
 "Restart": [
  null,
  "Reiniciar"
 ],
 "Resume": [
  null,
  "Reanudar"
 ],
 "Root Password": [
  null,
  "Contraseña del usuario root"
 ],
 "Route to $0": [
  null,
  "Ruta para $0"
 ],
 "Routed Network": [
  null,
  "Red enrutada"
 ],
 "Run": [
  null,
  "Ejecutar"
 ],
 "Run unattended installation": [
  null,
  "Ejecutar la instalación desatendida"
 ],
 "Run when host boots": [
  null,
  "Ejecutar cuando el anfitrión arranque"
 ],
 "SPICE": [
  null,
  "SPICE"
 ],
 "SPICE Address:": [
  null,
  "Dirección SPICE:"
 ],
 "SPICE Port:": [
  null,
  "Puerto SPICE:"
 ],
 "SPICE TLS Port:": [
  null,
  "Puerto SPICE TLS:"
 ],
 "Save": [
  null,
  "Guardar"
 ],
 "Send Non-Maskable Interrupt": [
  null,
  "Enviar interrupción no enmascarable"
 ],
 "Send key": [
  null,
  "Tecla enviar"
 ],
 "Serial Console": [
  null,
  "Consola serie"
 ],
 "Server has closed the connection.": [
  null,
  "El servidor ha cerrado la conexión."
 ],
 "Session": [
  null,
  "Sesión"
 ],
 "Set DHCP Range": [
  null,
  "Establecer un rango DHCP"
 ],
 "Set manually": [
  null,
  "Establecer manualmente"
 ],
 "Setting the user passwords for unattended installation requires starting the VM when creating it": [
  null,
  "Establecer las contraseñas de usuario para la instalación desatendida requiere iniciar la MV al crearla"
 ],
 "Shift+Insert": [
  null,
  "Shift+Insert"
 ],
 "Show Additional Options": [
  null,
  "Mostrar opciones adicionales"
 ],
 "Shut Down": [
  null,
  "Apagar"
 ],
 "Shut off the VM in order to edit firmware configuration": [
  null,
  "Apague la MV para editar la configuración del firmware"
 ],
 "Size": [
  null,
  "Tamaño"
 ],
 "Sockets": [
  null,
  "Sockets"
 ],
 "Source": [
  null,
  "Fuente"
 ],
 "Source Format": [
  null,
  "Formato fuente"
 ],
 "Source Path": [
  null,
  "Dirección de origen"
 ],
 "Source Volume Group": [
  null,
  "Origen del grupo de volumen"
 ],
 "Source path should not be empty": [
  null,
  "La ruta de origen no debe estar vacía"
 ],
 "Source should start with http, ftp or nfs protocol": [
  null,
  "La fuente debería empezar con http, ftp o protocolo nfs"
 ],
 "Start": [
  null,
  "Iniciar"
 ],
 "Start libvirt": [
  null,
  "Iniciar libvirt"
 ],
 "Start pool when host boots": [
  null,
  "Iniciar el grupo cuando el anfitrión arranque"
 ],
 "Start should not be empty": [
  null,
  "Empezar no debería estar vacío"
 ],
 "Startup": [
  null,
  "Puesta en marcha"
 ],
 "State": [
  null,
  "Estado"
 ],
 "Storage": [
  null,
  "Almacenamiento"
 ],
 "Storage Pool": [
  "Storage Pools",
  "Grupo de almacenamiento",
  "Grupos de almacenamiento"
 ],
 "Storage Pool $0 failed to get activated": [
  null,
  "El grupo de almacenamiento $0 falló al activarse"
 ],
 "Storage Pool $0 failed to get deactivated": [
  null,
  "El grupo de almacenamiento $0 falló al desactivarse"
 ],
 "Storage Pool Name": [
  null,
  "Nombre del grupo de almacenamiento"
 ],
 "Storage Pool failed to be created": [
  null,
  "No se pudo crear el grupo de almacenamiento"
 ],
 "Storage Pools": [
  null,
  "Grupos de almacenamiento"
 ],
 "Storage Volume": [
  null,
  "Volumen de almacenamiento"
 ],
 "Storage Volumes": [
  null,
  "Volúmenes de almacenamiento"
 ],
 "Storage Volumes could not be deleted": [
  null,
  "Los volúmenes de almacenamiento no se pueden eliminar"
 ],
 "Storage size must not be 0": [
  null,
  "El tamaño del almacenamiento no debe ser 0"
 ],
 "System": [
  null,
  "Sistema"
 ],
 "Target": [
  null,
  "Objetivo"
 ],
 "Target Path": [
  null,
  "Ruta de destino"
 ],
 "Target path should not be empty": [
  null,
  "La ruta de destino no debe estar vacía"
 ],
 "The $0 could not be deleted": [
  null,
  "La $0 no se pudo eliminar"
 ],
 "The Storage Pool could not be deleted": [
  null,
  "No se pudo eliminar el grupo de almacenamiento"
 ],
 "The VM crashed.": [
  null,
  "La VM se ha cerrado."
 ],
 "The VM is down.": [
  null,
  "La MV está apagada."
 ],
 "The VM is going down.": [
  null,
  "La MV se está apagando."
 ],
 "The VM is idle.": [
  null,
  "La MV está en espera."
 ],
 "The VM is in process of dying (shut down or crash is not completed).": [
  null,
  "La MV está moribunda (el apagado o el cierre no se ha completado)."
 ],
 "The VM is paused.": [
  null,
  "La MV está pausada."
 ],
 "The VM is running and will be forced off before deletion.": [
  null,
  "La MV está ejecutándose y se forzará el apagado antes de la eliminación."
 ],
 "The VM is running.": [
  null,
  "La MV se está ejecutando."
 ],
 "The VM is suspended by guest power management.": [
  null,
  "La MV está suspendida por la administración de energía del invitado."
 ],
 "The VM needs to be running or shut off to detach this device": [
  null,
  "La máquina virtual necesita ejecutarse o apagarse para desmontar este dispositivo"
 ],
 "The directory on the server being exported": [
  null,
  "El directorio en el servidor se está exportando"
 ],
 "The pool is empty": [
  null,
  "El grupo está vacío"
 ],
 "The selected Operating System does not support unattended installation": [
  null,
  "El sistema operativo seleccionado no soporta una instalación desatendida"
 ],
 "The selected Operating System has minimum memory requirement of $0 $1": [
  null,
  "El sistema operativo seleccionado tiene una memoria mínima necesaria de $0 $1"
 ],
 "The selected Operating System has minimum storage size requirement of $0 $1": [
  null,
  "El sistema operativo tiene un almacenamiento mínimo que requerido de $0 $1"
 ],
 "The server refused to authenticate using any supported methods.": [
  null,
  "El servido rehusó autenticar usando los métodos soportados."
 ],
 "This VM is transient. Shut it down if you wish to delete it.": [
  null,
  "Esta MV es temporal. Apáguela si desea eliminarla."
 ],
 "This pool type does not support Storage Volume creation": [
  null,
  "Este tipo de grupo no soporta la creación de un volumen de almacenamiento"
 ],
 "This volume is already used by another VM.": [
  null,
  "Este volumen está utilizándose por otra MV."
 ],
 "This volume is already used by: ": [
  null,
  "Este volumen está utilizándose por: "
 ],
 "Threads per core": [
  null,
  "Hilos por núcleo"
 ],
 "Too much data": [
  null,
  "Demasiados datos"
 ],
 "Transient VMs don't support editting firmware configuration": [
  null,
  "Las MVs que son temporales no tienen soporte para editar la configuración del firmware"
 ],
 "Troubleshoot": [
  null,
  "Soporte"
 ],
 "Type": [
  null,
  "Tipo"
 ],
 "Type ID": [
  null,
  "Tipo de ID"
 ],
 "URL": [
  null,
  "URL"
 ],
 "Unique Network Name": [
  null,
  "Nombre único de red"
 ],
 "Unique name": [
  null,
  "Nombre único"
 ],
 "Unit": [
  null,
  "Unidad"
 ],
 "Unknown": [
  null,
  "Desconocido"
 ],
 "Unknown firmware": [
  null,
  "Firmware desconocido"
 ],
 "Unplug": [
  null,
  "Desenchufar"
 ],
 "Untrusted host": [
  null,
  "Anfitrión no seguro"
 ],
 "Url": [
  null,
  "URL"
 ],
 "Usage": [
  null,
  "Uso"
 ],
 "Use Existing": [
  null,
  "Utilizar existente"
 ],
 "Used": [
  null,
  "Usado"
 ],
 "Used by": [
  null,
  "Usado por"
 ],
 "VCPU settings could not be saved": [
  null,
  "No se pudo guardar la configuración de la vCPU"
 ],
 "VM $0 already exists": [
  null,
  "La MV $0 ya existe"
 ],
 "VM $0 failed to Reboot": [
  null,
  "La MV $0 falló al reiniciarse"
 ],
 "VM $0 failed to force Reboot": [
  null,
  "La MV $0 falló al forzar el reinicio"
 ],
 "VM $0 failed to force shutdown": [
  null,
  "La MV $0 falló al forzar un apagado"
 ],
 "VM $0 failed to get deleted": [
  null,
  "La MV $0 falló al eliminarse"
 ],
 "VM $0 failed to get installed": [
  null,
  "La MV $0 falló al instalarse"
 ],
 "VM $0 failed to pause": [
  null,
  "La MV $0 falló al pausarse"
 ],
 "VM $0 failed to resume": [
  null,
  "La MV $0 falló al despausarse"
 ],
 "VM $0 failed to send NMI": [
  null,
  "La MV $0 falló al enviar el NMI"
 ],
 "VM $0 failed to shutdown": [
  null,
  "La MV $0 falló al apagarse"
 ],
 "VM $0 failed to start": [
  null,
  "La MV $0 falló al arrancarse"
 ],
 "VNC": [
  null,
  "VNC"
 ],
 "VNC Address:": [
  null,
  "Dirección VNC:"
 ],
 "VNC Port:": [
  null,
  "Puerto VNC:"
 ],
 "VNC TLS Port:": [
  null,
  "Puerto VNC TLS:"
 ],
 "Vendor": [
  null,
  "Proveedor"
 ],
 "Virtual Machines": [
  null,
  "Máquinas virtuales"
 ],
 "Virtual Machines Management": [
  null,
  "Gestión de máquinas virtuales"
 ],
 "Virtual Network": [
  null,
  "Red virtual"
 ],
 "Virtual Network failed to be created": [
  null,
  "La red virtual falló al crearse"
 ],
 "Virtualization Service (libvirt) is Not Active": [
  null,
  "Servicio de virtualización (libvirt) no está activo"
 ],
 "Volume": [
  null,
  "Volumen"
 ],
 "Volume Group name": [
  null,
  "Nombre del grupo de volumen"
 ],
 "Volume Group name should not be empty": [
  null,
  "El grupo de volumen no debe estar vacío"
 ],
 "Volume failed to be created": [
  null,
  "El volumen falló al crearse"
 ],
 "WWPN": [
  null,
  "WWPN"
 ],
 "Writeable": [
  null,
  "Puede escribirse"
 ],
 "Writeable and shared": [
  null,
  "Puede escribirse y compartirse"
 ],
 "You need to select the most closely matching Operating System": [
  null,
  "Debe seleccionar el sistema operativo que mejor se ajuste"
 ],
 "Your session has been terminated.": [
  null,
  "Su sesión se ha terminado."
 ],
 "Your session has expired. Please log in again.": [
  null,
  "Su sesión ha expirado. Por favor inicie sesión otra vez."
 ],
 "active": [
  null,
  "activo"
 ],
 "bridge": [
  null,
  "puente"
 ],
 "cdrom": [
  null,
  "cdrom"
 ],
 "crashed": [
  null,
  "cerrado"
 ],
 "custom": [
  null,
  "personalizado"
 ],
 "direct": [
  null,
  "directo"
 ],
 "disabled": [
  null,
  "desactivado"
 ],
 "disk": [
  null,
  "disco"
 ],
 "down": [
  null,
  "apagado"
 ],
 "dying": [
  null,
  "agonizante"
 ],
 "enabled": [
  null,
  "activado"
 ],
 "ethernet": [
  null,
  "ethernet"
 ],
 "host": [
  null,
  "anfitrión"
 ],
 "host device": [
  null,
  "dispositivo anfitrión"
 ],
 "hostdev": [
  null,
  "hostdev"
 ],
 "iSCSI Initiator IQN": [
  null,
  "Iniciador de iSCSI IQN"
 ],
 "iSCSI Target": [
  null,
  "Objetivo iSCSI"
 ],
 "iSCSI direct Target": [
  null,
  "Objetivo directo iSCI"
 ],
 "iSCSI target IQN": [
  null,
  "Objetivo de iSCSI en IQN"
 ],
 "idle": [
  null,
  "en espera"
 ],
 "inactive": [
  null,
  "inactivo"
 ],
 "mcast": [
  null,
  "mcast"
 ],
 "network": [
  null,
  "red"
 ],
 "no": [
  null,
  "no"
 ],
 "paused": [
  null,
  "en pausa"
 ],
 "redirected device": [
  null,
  "dispositivos redirigido"
 ],
 "running": [
  null,
  "en ejecución"
 ],
 "server": [
  null,
  "servidor"
 ],
 "show less": [
  null,
  "mostrar menos"
 ],
 "show more": [
  null,
  "mostrar más"
 ],
 "shut off": [
  null,
  "apagar"
 ],
 "shutdown": [
  null,
  "apagar"
 ],
 "suspended (PM)": [
  null,
  "suspendido (PM)"
 ],
 "udp": [
  null,
  "udp"
 ],
 "undefined": [
  null,
  "sin definir"
 ],
 "up": [
  null,
  "encendido"
 ],
 "user": [
  null,
  "usuario"
 ],
 "vCPU Count": [
  null,
  "Número de vCPU"
 ],
 "vCPU Maximum": [
  null,
  "vCPU máximo"
 ],
 "vCPUs": [
  null,
  "vCPUs"
 ],
 "vhostuser": [
  null,
  "vhostuser"
 ],
 "virt-install package needs to be installed on the system in order to create new VMs": [
  null,
  "Hay que instalar el paquete virt-install para poder crear nuevas máquinas virtuales"
 ],
 "yes": [
  null,
  "sí"
 ]
}));
