General
=======

For more information about the port or GLib, GTK+ and the GIMP to
native Windows, and pre-built binaries (DLLs), surf to
http://www.gimp.org/win32/ . "Native" means that we use the Win32 API
only, and no POSIX (Unix) emulation layer except that provided by the
Microsoft runtime C library.

To build GLib on Win32, you can use either gcc or the Microsoft
compiler and tools. Both the compiler from MSVC 5.0 and from MSVC 6.0
have been used successfully.

But note that to just *use* GLib on Windows, there is no need to build
it, prebuilt DLLs are available from the webiste above.

The following preprocessor macros are used for conditional compilation
related to Win32:

- G_OS_WIN32 is defined when compiling for Win32, *and* without
  any POSIX emulation, other that to the extent provided by the
  bundled Microsoft C library (msvcrt.dll).

- G_WITH_CYGWIN is defined if compiling for the Cygwin
  environment. Note that G_OS_WIN32 is *not* defined in that case, as
  Cygwin is supposed to behave like Unix. G_OS_UNIX *is* defined when
  compiling for Cygwin.

- G_PLATFORM_WIN32 is defined when either G_OS_WIN32 or G_WITH_CYGWIN
  is defined.

The Win32 port of GLib and related software uses only G_OS_WIN32. As
G_OS_WIN32 is defined in glibconfig.h, it is available to all source
files that use GLib (or GTK+, which uses GLib).

Additionally, there are the compiler-specific macros:
- __GNUC__ is defined when using GCC
- _MSC_VER is defined when using the Microsoft compiler

G_OS_WIN32 implies using the Microsoft C runtime MSVCRT.DLL. GLib is
not known to work with the older CRTDLL.DLL runtime, or the static
Microsoft C runtime libraries LIBC.LIB and LIBCMT.LIB. 

Building software that use GLib or GTK+
=======================================

Even building software that just *use* GLib or GTK+ also require to
have the right compiler set up the right way, so if you intend to use
gcc, follow the relevant instructions below in that case, too.

Dependent libraries
===================

Before building GLib you must also have the libiconv library, either
from the same website mentioned above, or from it's homepage at
http://clisp.cons.org/~haible/packages-libiconv.html. Libiconv has
makefiles for building with MS Visual C only, but as it is one source
file only, building it "by hand" with gcc isn't hard.

You must also have the "intl" library from GNU tettext 0.10.40 (or
later). Get a prebuilt version from the website mentioned above.

Edit the correct paths to those libraries in build/win32/module.defs
as appropriate.

Where are the makefiles?
========================

If you are building from a CVS snapshot, you will not have any
makefile.mingw or makefile.msc file. You should copy the corresponding
makefile.mingw.in or makefile.msc.in file to that name, and replace
any @...@ strings with the correct value.

This is done automatically when an official GLib source distribution
package is built.

Building GLib with gcc
======================

I use gcc-2.95.3. Version 2.95.2 will most probably also work.

You can either use gcc running on Cygwin, or the "pure" mingw
gcc. Using the latter might work better, or at least did at some
point.

Fetch the latest version of gcc for mingw and the msvcrt runtime, from
www.mingw.org.

Set up your PATH so that the gcc from the bin directory that got
created above is the one that gets used. Even if you run the mingw
gcc, you still want to have Cygwin to run make in.

Then run make -f makefile.mingw. Install the resulting DLLs somewhere
in your PATH. You can either keep the headers and import libraries
where they are, or install them somewhere else. There are no rules in
the makefile.mingws for installing, it is up to you where to put
stuff.

I use the -fnative-struct flag, which means that in order to use the
prebuilt DLLs (especially of GTK+), you *must* also use that flag.
(This flag means that the struct layout is identical to that used by
MSVC. This is essential if the same DLLs are to be usable both from
gcc- and MSVC-compiled code, which definitely is a good thing.)

It is also possible to use the auto*, ./configure and libtool
mechanism when building for mingw. You should be running Cygwin, or
maybe cross-compiling from real Unix, for the configure script to
work, obviously. You most probably should have very new auto* and
libtool. Personally, I invoke configure using:

CC='gcc -mpentium -fnative-struct'
  CPPFLAGS='-I/src/libiconv-1.7/include -I/target/include'
  LDFLAGS='-L/src/libiconv-1.7/lib -L/target/lib' ./configure
  --with-libiconv --disable-static --prefix=/target
  --host=i386-pc-mingw32 --enable-maintainer-mode

(on a single line)

But please note that the ./configure mechanism should not blindly be
used to build a GLib to be distributed to potential developers because
it produces a compiler-dependent glibconfig.h (and config.h, but that
shouldn't matter, as it isn't seen by GLib-using applications). For
instance, the typedef for gint64 is long long with gcc, but __int64
with MSVC.

Except for this and a few other minor issues, there really shouldn't
be any reason to distribute separate GLib DLLs for gcc and MSVC users,
as both compiler+tools generate code that uses the same C runtime
library. Thus one either has to manually edit glibconfig.h afterwards,
or use the supplied config.h.win32 and glibconfig.h.win32. These have
been produced by running configure twice, once using gcc and once
using MSVC, and merging the resulting files with diff -D.

There are probably also other hickups when using auto* and configure
to build for mingw, sigh. Every now and then I try to get rid of the
hand-written makefiles and configuration headers for Win32, and start
fooling around with auto* etc, but after a while give up and fall
back. At least, it used to be like that. Lately I have again been
working on using auto*/configure/libtool on Win32, and it now seems to
work well enough (with some patches applied to the current CVS
libtool...).

The hand-written makefile.{mingw,msc} files, and the stuff in the
"build" subdirectory, has been updated to produce DLLs and import
libraries that match what Makefile.am and libtool produces. For GLib,
the DLL is called libglib-1.3-10.dll (at GLib 1.3.10), and the import
libraries libglib-1.3.a and glib-1.3.lib. Note that the "1.3" is part
of the "basename" of the library, it is not something that libtool
would tuck on. The -10 suffix is the value of "LT_CURRENT -
LT_AGE". The 10 is *not* the micro version number of GLib, although,
for GLib 1.3.10, it happens to be the same. For the gory details, see
configure.in and libtool documentation.

If you want to run the Cygwin-hosted gcc, and still want to produce
code that does not use Cygwin, but the msvcrt runtime, in theory it
should work to use the -no-cygwin flag, but I haven't tested that
lately.

If you would want to use the Cygwin tools to generate a GLib that
*does* use the Cygwin runtime, the normal Unix configuration method
should work as if on Unix. Note that successfully producing shared
libraries (DLLs) for Cygwin most probably requires you to have a very
new libtool. (And a new libtool probably requires rather new autoconf
and automake.) I haven't personally tested this in a while.

Building with MSVC
==================

If using the Microsoft toolchain, build with `nmake -f
makefile.msc`.

--Tor Lillqvist <tml@iki.fi>
