Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
# GLIB - Library of useful C routines
|
|
|
|
|
|
|
|
|
|
#GTESTER = gtester # for non-GLIB packages
|
2013-06-24 01:35:15 +02:00
|
|
|
#GTESTER_REPORT = gtester-report # for non-GLIB packages
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
GTESTER = $(top_builddir)/glib/gtester # for the GLIB package
|
|
|
|
|
GTESTER_REPORT = $(top_builddir)/glib/gtester-report # for the GLIB package
|
|
|
|
|
NULL =
|
|
|
|
|
|
|
|
|
|
# initialize variables for unconditional += appending
|
|
|
|
|
BUILT_SOURCES =
|
|
|
|
|
BUILT_EXTRA_DIST =
|
2013-07-11 19:54:47 +02:00
|
|
|
CLEANFILES = *.log *.trs
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
DISTCLEANFILES =
|
|
|
|
|
MAINTAINERCLEANFILES =
|
|
|
|
|
EXTRA_DIST =
|
|
|
|
|
TEST_PROGS =
|
|
|
|
|
|
|
|
|
|
installed_test_LTLIBRARIES =
|
|
|
|
|
installed_test_PROGRAMS =
|
|
|
|
|
installed_test_SCRIPTS =
|
|
|
|
|
nobase_installed_test_DATA =
|
|
|
|
|
|
|
|
|
|
noinst_LTLIBRARIES =
|
|
|
|
|
noinst_PROGRAMS =
|
|
|
|
|
noinst_SCRIPTS =
|
|
|
|
|
noinst_DATA =
|
|
|
|
|
|
|
|
|
|
check_LTLIBRARIES =
|
|
|
|
|
check_PROGRAMS =
|
|
|
|
|
check_SCRIPTS =
|
|
|
|
|
check_DATA =
|
|
|
|
|
|
|
|
|
|
TESTS =
|
|
|
|
|
|
|
|
|
|
# test-nonrecursive: run tests only in cwd
|
2013-10-10 15:23:00 +02:00
|
|
|
if OS_UNIX
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
test-nonrecursive: ${TEST_PROGS}
|
|
|
|
|
@test -z "${TEST_PROGS}" || G_TEST_SRCDIR="$(abs_srcdir)" G_TEST_BUILDDIR="$(abs_builddir)" G_DEBUG=gc-friendly MALLOC_CHECK_=2 MALLOC_PERTURB_=$$(($${RANDOM:-256} % 256)) ${GTESTER} --verbose ${TEST_PROGS}
|
|
|
|
|
else
|
|
|
|
|
test-nonrecursive:
|
|
|
|
|
endif
|
|
|
|
|
|
2013-10-10 15:23:00 +02:00
|
|
|
.PHONY: test-nonrecursive
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
|
|
|
|
|
.PHONY: lcov genlcov lcov-clean
|
|
|
|
|
# use recursive makes in order to ignore errors during check
|
|
|
|
|
lcov:
|
|
|
|
|
-$(MAKE) $(AM_MAKEFLAGS) -k check
|
|
|
|
|
$(MAKE) $(AM_MAKEFLAGS) genlcov
|
|
|
|
|
|
|
|
|
|
# we have to massage the lcov.info file slightly to hide the effect of libtool
|
|
|
|
|
# placing the objects files in the .libs/ directory separate from the *.c
|
|
|
|
|
# we also have to delete tests/.libs/libmoduletestplugin_*.gcda
|
|
|
|
|
genlcov:
|
2013-12-21 06:04:14 +01:00
|
|
|
$(AM_V_GEN) rm -f $(top_builddir)/tests/.libs/libmoduletestplugin_*.gcda; \
|
|
|
|
|
$(LTP) --quiet --directory $(top_builddir) --capture --output-file glib-lcov.info --test-name GLIB_PERF --no-checksum --compat-libtool --ignore-errors source; \
|
2013-12-21 19:20:44 +01:00
|
|
|
$(LTP) --quiet --output-file glib-lcov.info --remove glib-lcov.info docs/reference/\* /tmp/\* gio/tests/gdbus-object-manager-example/\* ; \
|
2013-12-21 06:04:14 +01:00
|
|
|
LANG=C $(LTP_GENHTML) --quiet --prefix $(top_builddir) --output-directory glib-lcov --title "GLib Code Coverage" --legend --frames --show-details glib-lcov.info --ignore-errors source
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
@echo "file://$(abs_top_builddir)/glib-lcov/index.html"
|
|
|
|
|
|
|
|
|
|
lcov-clean:
|
2013-12-21 22:16:16 +01:00
|
|
|
$(AM_V_GEN) $(LTP) --quiet --directory $(top_builddir) -z
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
|
|
|
|
|
# run tests in cwd as part of make check
|
|
|
|
|
check-local: test-nonrecursive
|
|
|
|
|
|
|
|
|
|
# We support a fairly large range of possible variables. It is expected that all types of files in a test suite
|
|
|
|
|
# will belong in exactly one of the following variables.
|
|
|
|
|
#
|
|
|
|
|
# First, we support the usual automake suffixes, but in lowercase, with the customary meaning:
|
|
|
|
|
#
|
|
|
|
|
# test_programs, test_scripts, test_data, test_ltlibraries
|
|
|
|
|
#
|
|
|
|
|
# The above are used to list files that are involved in both uninstalled and installed testing. The
|
|
|
|
|
# test_programs and test_scripts are taken to be actual testcases and will be run as part of the test suite.
|
|
|
|
|
# Note that _data is always used with the nobase_ automake variable name to ensure that installed test data is
|
|
|
|
|
# installed in the same way as it appears in the package layout.
|
|
|
|
|
#
|
|
|
|
|
# In order to mark a particular file as being only for one type of testing, use 'installed' or 'uninstalled',
|
|
|
|
|
# like so:
|
|
|
|
|
#
|
|
|
|
|
# installed_test_programs, uninstalled_test_programs
|
|
|
|
|
# installed_test_scripts, uninstalled_test_scripts
|
|
|
|
|
# installed_test_data, uninstalled_test_data
|
|
|
|
|
# installed_test_ltlibraries, uninstalled_test_ltlibraries
|
|
|
|
|
#
|
|
|
|
|
# Additionally, we support 'extra' infixes for programs and scripts. This is used for support programs/scripts
|
|
|
|
|
# that should not themselves be run as testcases (but exist to be used from other testcases):
|
|
|
|
|
#
|
|
|
|
|
# test_extra_programs, installed_test_extra_programs, uninstalled_test_extra_programs
|
|
|
|
|
# test_extra_scripts, installed_test_extra_scripts, uninstalled_test_extra_scripts
|
|
|
|
|
#
|
|
|
|
|
# Additionally, for _scripts and _data, we support the customary dist_ prefix so that the named script or data
|
|
|
|
|
# file automatically end up in the tarball.
|
|
|
|
|
#
|
|
|
|
|
# dist_test_scripts, dist_test_data, dist_test_extra_scripts
|
|
|
|
|
# dist_installed_test_scripts, dist_installed_test_data, dist_installed_test_extra_scripts
|
|
|
|
|
# dist_uninstalled_test_scripts, dist_uninstalled_test_data, dist_uninstalled_test_extra_scripts
|
|
|
|
|
#
|
|
|
|
|
# Note that no file is automatically disted unless it appears in one of the dist_ variables. This follows the
|
|
|
|
|
# standard automake convention of not disting programs scripts or data by default.
|
|
|
|
|
#
|
|
|
|
|
# test_programs, test_scripts, uninstalled_test_programs and uninstalled_test_scripts (as well as their disted
|
|
|
|
|
# variants) will be run as part of the in-tree 'make check'. These are all assumed to be runnable under
|
|
|
|
|
# gtester. That's a bit strange for scripts, but it's possible.
|
|
|
|
|
|
|
|
|
|
# we use test -z "$(TEST_PROGS)" above, so make sure we have no extra whitespace...
|
|
|
|
|
TEST_PROGS += $(strip $(test_programs) $(test_scripts) $(uninstalled_test_programs) $(uninstalled_test_scripts) \
|
|
|
|
|
$(dist_test_scripts) $(dist_uninstalled_test_scripts))
|
|
|
|
|
|
2013-06-01 16:07:33 +02:00
|
|
|
if OS_WIN32
|
|
|
|
|
TESTS += $(test_programs) $(test_scripts) $(uninstalled_test_programs) $(uninstalled_test_scripts) \
|
|
|
|
|
$(dist_test_scripts) $(dist_uninstalled_test_scripts)
|
|
|
|
|
endif
|
|
|
|
|
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
# Note: build even the installed-only targets during 'make check' to ensure that they still work.
|
|
|
|
|
# We need to do a bit of trickery here and manage disting via EXTRA_DIST instead of using dist_ prefixes to
|
|
|
|
|
# prevent automake from mistreating gmake functions like $(wildcard ...) and $(addprefix ...) as if they were
|
|
|
|
|
# filenames, including removing duplicate instances of the opening part before the space, eg. '$(addprefix'.
|
|
|
|
|
all_test_programs = $(test_programs) $(uninstalled_test_programs) $(installed_test_programs) \
|
|
|
|
|
$(test_extra_programs) $(uninstalled_test_extra_programs) $(installed_test_extra_programs)
|
|
|
|
|
all_test_scripts = $(test_scripts) $(uninstalled_test_scripts) $(installed_test_scripts) \
|
|
|
|
|
$(test_extra_scripts) $(uninstalled_test_extra_scripts) $(installed_test_extra_scripts)
|
|
|
|
|
all_dist_test_scripts = $(dist_test_scripts) $(dist_uninstalled_test_scripts) $(dist_installed_test_scripts) \
|
|
|
|
|
$(dist_test_extra_scripts) $(dist_uninstalled_test_extra_scripts) $(dist_installed_test_extra_scripts)
|
|
|
|
|
all_test_scripts += $(all_dist_test_scripts)
|
|
|
|
|
EXTRA_DIST += $(all_dist_test_scripts)
|
|
|
|
|
all_test_data = $(test_data) $(uninstalled_test_data) $(installed_test_data)
|
|
|
|
|
all_dist_test_data = $(dist_test_data) $(dist_uninstalled_test_data) $(dist_installed_test_data)
|
|
|
|
|
all_test_data += $(all_dist_test_data)
|
|
|
|
|
EXTRA_DIST += $(all_dist_test_data)
|
|
|
|
|
all_test_ltlibs = $(test_ltlibraries) $(uninstalled_test_ltlibraries) $(installed_test_ltlibraries)
|
|
|
|
|
|
|
|
|
|
if ENABLE_ALWAYS_BUILD_TESTS
|
|
|
|
|
noinst_LTLIBRARIES += $(all_test_ltlibs)
|
|
|
|
|
noinst_PROGRAMS += $(all_test_programs)
|
|
|
|
|
noinst_SCRIPTS += $(all_test_scripts)
|
|
|
|
|
noinst_DATA += $(all_test_data)
|
|
|
|
|
else
|
|
|
|
|
check_LTLIBRARIES += $(all_test_ltlibs)
|
|
|
|
|
check_PROGRAMS += $(all_test_programs)
|
|
|
|
|
check_SCRIPTS += $(all_test_scripts)
|
|
|
|
|
check_DATA += $(all_test_data)
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
if ENABLE_INSTALLED_TESTS
|
|
|
|
|
installed_test_PROGRAMS += $(test_programs) $(installed_test_programs) \
|
|
|
|
|
$(test_extra_programs) $(installed_test_extra_programs)
|
|
|
|
|
installed_test_SCRIPTS += $(test_scripts) $(installed_test_scripts) \
|
|
|
|
|
$(test_extra_scripts) $(test_installed_extra_scripts)
|
|
|
|
|
installed_test_SCRIPTS += $(dist_test_scripts) $(dist_test_extra_scripts) \
|
|
|
|
|
$(dist_installed_test_scripts) $(dist_installed_test_extra_scripts)
|
|
|
|
|
nobase_installed_test_DATA += $(test_data) $(installed_test_data)
|
|
|
|
|
nobase_installed_test_DATA += $(dist_test_data) $(dist_installed_test_data)
|
|
|
|
|
installed_test_LTLIBRARIES += $(test_ltlibraries) $(installed_test_ltlibraries)
|
|
|
|
|
installed_testcases = $(test_programs) $(installed_test_programs) \
|
|
|
|
|
$(test_scripts) $(installed_test_scripts) \
|
|
|
|
|
$(dist_test_scripts) $(dist_installed_test_scripts)
|
|
|
|
|
|
|
|
|
|
installed_test_meta_DATA = $(installed_testcases:=.test)
|
|
|
|
|
|
|
|
|
|
%.test: %$(EXEEXT) Makefile
|
|
|
|
|
$(AM_V_GEN) (echo '[Test]' > $@.tmp; \
|
|
|
|
|
echo 'Type=session' >> $@.tmp; \
|
2013-12-21 19:20:44 +01:00
|
|
|
echo 'Exec=$(installed_testdir)/$(notdir $<)' >> $@.tmp; \
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
mv $@.tmp $@)
|
|
|
|
|
|
|
|
|
|
CLEANFILES += $(installed_test_meta_DATA)
|
|
|
|
|
endif
|
