glib/configure.in

1524 lines
41 KiB
Plaintext
Raw Normal View History

dnl ***********************************
dnl *** include special GLib macros ***
dnl ***********************************
builtin(include, acglib.m4)dnl
# require autoconf 2.13
AC_PREREQ(2.13)
1998-06-11 01:21:14 +02:00
# Process this file with autoconf to produce a configure script.
AC_INIT(glist.c)
# Save this value here, since automake will set cflags later
cflags_set=${CFLAGS+set}
# we rewrite this file
rm -f glibconfig-sysdefs.h
dnl we need to AC_DIVERT_PUSH/AC_DIVERT_POP these variable definitions so they
dnl are available for $ac_help expansion (don't we all *love* autoconf?)
AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
#
# The following version number definitions apply to GLib, GModule and GThread
# as a whole, so if changes occoured in any of them, they are all
# treated with the same interface and binary age.
#
1998-06-11 01:21:14 +02:00
# Making releases:
# GLIB_MICRO_VERSION += 1;
# GLIB_INTERFACE_AGE += 1;
# GLIB_BINARY_AGE += 1;
# if any functions have been added, set GLIB_INTERFACE_AGE to 0.
# if backwards compatibility has been broken,
# set GLIB_BINARY_AGE _and_ GLIB_INTERFACE_AGE to 0.
1998-06-11 01:21:14 +02:00
#
GLIB_MAJOR_VERSION=1
GLIB_MINOR_VERSION=3
GLIB_MICRO_VERSION=1
GLIB_INTERFACE_AGE=0
GLIB_BINARY_AGE=0
1998-06-11 01:21:14 +02:00
GLIB_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_MICRO_VERSION
dnl
AC_DIVERT_POP()dnl
AC_SUBST(GLIB_MAJOR_VERSION)
AC_SUBST(GLIB_MINOR_VERSION)
AC_SUBST(GLIB_MICRO_VERSION)
1998-06-11 01:21:14 +02:00
AC_SUBST(GLIB_VERSION)
AC_SUBST(GLIB_INTERFACE_AGE)
AC_SUBST(GLIB_BINARY_AGE)
1998-06-11 01:21:14 +02:00
# libtool versioning
LT_RELEASE=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION
LT_CURRENT=`expr $GLIB_MICRO_VERSION - $GLIB_INTERFACE_AGE`
LT_REVISION=$GLIB_INTERFACE_AGE
LT_AGE=`expr $GLIB_BINARY_AGE - $GLIB_INTERFACE_AGE`
AC_SUBST(LT_RELEASE)
AC_SUBST(LT_CURRENT)
AC_SUBST(LT_REVISION)
AC_SUBST(LT_AGE)
VERSION=$GLIB_VERSION
PACKAGE=glib
AM_INIT_AUTOMAKE($PACKAGE, $VERSION, no-define)
# Specify a configuration file
AM_CONFIG_HEADER(config.h)
1998-06-11 01:21:14 +02:00
AC_DEFINE_UNQUOTED(GLIB_MAJOR_VERSION, $GLIB_MAJOR_VERSION)
AC_DEFINE_UNQUOTED(GLIB_MINOR_VERSION, $GLIB_MINOR_VERSION)
AC_DEFINE_UNQUOTED(GLIB_MICRO_VERSION, $GLIB_MICRO_VERSION)
AC_DEFINE_UNQUOTED(GLIB_INTERFACE_AGE, $GLIB_INTERFACE_AGE)
AC_DEFINE_UNQUOTED(GLIB_BINARY_AGE, $GLIB_BINARY_AGE)
1998-06-11 01:21:14 +02:00
dnl Initialize libtool
AM_PROG_LIBTOOL
dnl Initialize maintainer mode
AM_MAINTAINER_MODE
AC_CANONICAL_HOST
AC_MSG_CHECKING(for the BeOS)
case $host in
*-*-beos*)
glib_native_beos="yes"
;;
*)
glib_native_beos="no"
;;
esac
AC_MSG_RESULT([$glib_native_beos])
dnl figure debugging default, prior to $ac_help setup
dnl
AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
if test `expr $GLIB_MINOR_VERSION \% 2` = 1 ; then
debug_default=yes
else
debug_default=minimum
fi
AC_DIVERT_POP()dnl
dnl declare --enable-* args and collect ac_help strings
AC_ARG_ENABLE(debug, [ --enable-debug=[no/minimum/yes] turn on debugging [default=$debug_default]],,enable_debug=$debug_default)
AC_ARG_ENABLE(msg-prefix, [ --enable-msg-prefix turn on program name and PID prefixing of messages and warnings],,enable_msg_prefix=no)
AC_ARG_ENABLE(mem_check, [ --enable-mem-check turn on malloc/free sanity checking [default=no]],,enable_mem_check=no)
AC_ARG_ENABLE(mem_profile, [ --enable-mem-profile turn on malloc profiling atexit [default=no]],,enable_mem_profile=no)
1998-06-11 01:21:14 +02:00
AC_ARG_ENABLE(ansi, [ --enable-ansi turn on strict ansi [default=no]],
, enable_ansi=no)
AC_ARG_ENABLE(threads, [ --enable-threads turn on basic thread support [default=yes]
([=no] will override --with-threads)],,enable_threads=yes)
if test "x$enable_threads" != "xyes"; then
enable_threads=no
fi
1998-06-11 01:21:14 +02:00
AC_MSG_CHECKING(whether to enable memory checking)
1998-06-11 01:21:14 +02:00
if test "x$enable_mem_check" = "xyes"; then
AC_DEFINE(ENABLE_MEM_CHECK, 1)
AC_SUBST(ENABLE_MEM_CHECK)
AC_MSG_RESULT(yes)
1998-06-11 01:21:14 +02:00
else
AC_MSG_RESULT(no)
1998-06-11 01:21:14 +02:00
fi
AC_MSG_CHECKING(whether to enable memory profiling)
1998-06-11 01:21:14 +02:00
if test "x$enable_mem_profile" = "xyes"; then
AC_DEFINE(ENABLE_MEM_PROFILE, 1)
AC_SUBST(ENABLE_MEM_PROFILE)
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
if test "x$enable_debug" = "xyes"; then
test "$cflags_set" = set || CFLAGS="$CFLAGS -g"
GLIB_DEBUG_FLAGS="-DG_ENABLE_DEBUG"
else
if test "x$enable_debug" = "xno"; then
GLIB_DEBUG_FLAGS="-DG_DISABLE_ASSERT -DG_DISABLE_CHECKS"
fi
fi
AC_DEFINE_UNQUOTED(G_COMPILED_WITH_DEBUGGING, "${enable_debug}")
if test "x$enable_msg_prefix" = "xyes"; then
AC_DEFINE_UNQUOTED(G_ENABLE_MSG_PREFIX, 1)
fi
# Checks for programs.
AC_PROG_CC
AM_PROG_CC_STDC
AC_PROG_INSTALL
changequote(,)dnl
if test "x$GCC" = "xyes"; then
case " $CFLAGS " in
*[\ \ ]-Wall[\ \ ]*) ;;
*) CFLAGS="$CFLAGS -Wall" ;;
esac
if test "x$enable_ansi" = "xyes"; then
case " $CFLAGS " in
*[\ \ ]-ansi[\ \ ]*) ;;
*) CFLAGS="$CFLAGS -ansi" ;;
esac
case " $CFLAGS " in
*[\ \ ]-pedantic[\ \ ]*) ;;
*) CFLAGS="$CFLAGS -pedantic" ;;
esac
fi
fi
changequote([,])dnl
dnl DU4 native cc currently needs -std1 for ANSI mode (instead of K&R)
AC_MSG_CHECKING([for extra flags to get ANSI library prototypes])
glib_save_LIBS=$LIBS
LIBS="$LIBS -lm"
AC_TRY_RUN([#include <math.h>
int main (void) { return (log(1) != log(1.)); }],
AC_MSG_RESULT(none needed),
glib_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -std1"
AC_TRY_RUN([#include <math.h>
int main (void) { return (log(1) != log(1.)); }],
AC_MSG_RESULT(-std1),
AC_MSG_RESULT()
CFLAGS=$glib_save_CFLAGS
AC_MSG_WARN(
[No ANSI prototypes found in library. (-std1 didn't work.)])
)
)
LIBS=$glib_save_LIBS
dnl NeXTStep cc seems to need this
AC_MSG_CHECKING([for extra flags for POSIX compliance])
AC_TRY_COMPILE([#include <dirent.h>], [DIR *dir;],
AC_MSG_RESULT(none needed),
glib_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -posix"
AC_TRY_COMPILE([#include <dirent.h>], [DIR *dir;],
AC_MSG_RESULT(-posix),
AC_MSG_RESULT()
CFLAGS=$glib_save_CFLAGS
AC_MSG_WARN([Could not determine POSIX flag. (-posix didn't work.)])))
# Checks for header files.
AC_HEADER_STDC
# Checks for library functions.
AC_FUNC_VPRINTF
AC_CHECK_FUNCS(atexit on_exit)
AC_CHECK_SIZEOF(char)
AC_CHECK_SIZEOF(short)
AC_CHECK_SIZEOF(long)
AC_CHECK_SIZEOF(int)
AC_CHECK_SIZEOF(void *)
AC_CHECK_SIZEOF(long long)
if test x$ac_cv_sizeof_long_long = x8; then
# long long is a 64 bit integer.
AC_MSG_CHECKING(for format to printf and scanf a gint64)
AC_CACHE_VAL(glib_cv_long_long_format,[
AC_TRY_RUN([#include <stdio.h>
int main()
{
long long b, a = -0x3AFAFAFAFAFAFAFALL;
char buffer[1000];
sprintf (buffer, "%llu", a);
sscanf (buffer, "%llu", &b);
exit (b!=a);
}
],
glib_cv_long_long_format=ll,
glib_cv_long_long_format=q)])
AC_MSG_RESULT(%${glib_cv_long_long_format}i)
fi
dnl long doubles were not used, and a portability problem
dnl AC_C_LONG_DOUBLE
AC_C_CONST
dnl AC_C_INLINE is useless to us since it bails out too early, we need to
dnl truely know which ones of `inline', `__inline' and `__inline__' are
dnl actually supported.
AC_MSG_CHECKING(for __inline)
AC_CACHE_VAL(glib_cv_has__inline,[
AC_TRY_RUN([
__inline int foo () { return 0; }
int main () { return foo (); }
],
glib_cv_has__inline=yes
,
glib_cv_has__inline=no
,)
])
AC_MSG_RESULT($glib_cv_has__inline)
case x$glib_cv_has__inline in
xyes) AC_DEFINE(G_HAVE___INLINE)
esac
AC_MSG_CHECKING(for __inline__)
AC_CACHE_VAL(glib_cv_has__inline__,[
AC_TRY_RUN([
__inline__ int foo () { return 0; }
int main () { return foo (); }
],
glib_cv_has__inline__=yes
,
glib_cv_has__inline__=no
,)
])
AC_MSG_RESULT($glib_cv_has__inline__)
case x$glib_cv_has__inline__ in
xyes) AC_DEFINE(G_HAVE___INLINE__)
esac
AC_MSG_CHECKING(for inline)
AC_CACHE_VAL(glib_cv_hasinline,[
AC_TRY_RUN([
inline int foo () { return 0; }
int main () { return foo (); }
],
glib_cv_hasinline=yes
,
glib_cv_hasinline=no
,)
])
AC_MSG_RESULT($glib_cv_hasinline)
case x$glib_cv_hasinline in
xyes) AC_DEFINE(G_HAVE_INLINE)
esac
# check for bytesex stuff
AC_C_BIGENDIAN
# xhexk for header files
AC_CHECK_HEADERS(float.h, AC_DEFINE(HAVE_FLOAT_H))
AC_CHECK_HEADERS(limits.h, AC_DEFINE(HAVE_LIMITS_H))
AC_CHECK_HEADERS(pwd.h, AC_DEFINE(HAVE_PWD_H))
AC_CHECK_HEADERS(sys/param.h, AC_DEFINE(HAVE_SYS_PARAM_H))
AC_CHECK_HEADERS(sys/poll.h, AC_DEFINE(HAVE_SYS_POLL_H))
AC_CHECK_HEADERS(sys/select.h, AC_DEFINE(HAVE_SYS_SELECT_H))
AC_CHECK_HEADERS(sys/time.h, AC_DEFINE(HAVE_SYS_TIME_H))
AC_CHECK_HEADERS(sys/times.h, AC_DEFINE(HAVE_SYS_TIMES_H))
AC_CHECK_HEADERS(unistd.h, AC_DEFINE(HAVE_UNISTD_H))
AC_CHECK_HEADERS(values.h, AC_DEFINE(HAVE_VALUES_H))
AC_CHECK_HEADERS(stdint.h, AC_DEFINE(HAVE_VALUES_H))
# check additional type sizes
size_includes=["
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <string.h>
"]
if test "x$ac_cv_header_stdint_h" = "xyes"; then
size_includes=["$size_includes
#include <stdint.h>
"]
fi
if test "x$ac_cv_header_unistd_h" = "xyes"; then
size_includes=["$size_includes
#include <unistd.h>
"]
fi
GLIB_SIZEOF([$size_includes], size_t, size_t)
GLIB_SIZEOF([$size_includes], ptrdiff_t, ptrdiff_t)
GLIB_SIZEOF([$size_includes], intmax_t, intmax_t)
# Check for some functions
AC_CHECK_FUNCS(lstat strerror strsignal memmove vsnprintf strcasecmp strncasecmp poll)
# Check if bcopy can be used for overlapping copies, if memmove isn't found.
# The check is borrowed from the PERL Configure script.
if test "$ac_cv_func_memmove" != "yes"; then
AC_CACHE_CHECK(whether bcopy can handle overlapping copies,
glib_cv_working_bcopy,[AC_TRY_RUN([
int main() {
char buf[128], abc[128], *b;
int len, off, align;
bcopy("abcdefghijklmnopqrstuvwxyz0123456789", abc, 36);
for (align = 7; align >= 0; align--) {
for (len = 36; len; len--) {
b = buf+align; bcopy(abc, b, len);
for (off = 1; off <= len; off++) {
bcopy(b, b+off, len); bcopy(b+off, b, len);
if (bcmp(b, abc, len)) return(1);
}
}
}
return(0);
}],glib_cv_working_bcopy=yes,glib_cv_working_bcopy=no)])
if test "$glib_cv_working_bcopy" == "yes"; then
AC_DEFINE(HAVE_WORKING_BCOPY)
fi
fi
# Check for sys_errlist
AC_MSG_CHECKING(for sys_errlist)
AC_TRY_LINK(, [
extern char *sys_errlist[];
extern int sys_nerr;
sys_errlist[sys_nerr-1][0] = 0;
], glib_ok=yes, glib_ok=no)
AC_MSG_RESULT($glib_ok)
if test $glib_ok = no; then
AC_DEFINE(NO_SYS_ERRLIST)
fi
# Check for sys_siglist
AC_MSG_CHECKING(for sys_siglist)
AC_TRY_LINK(, [
extern char *sys_siglist[];
strlen (sys_siglist[0]);
], glib_ok=yes, glib_ok=no)
AC_MSG_RESULT($glib_ok)
if test $glib_ok = no; then
AC_DEFINE(NO_SYS_SIGLIST)
fi
# Check for sys_siglist decl (see Tue Jan 19 00:44:24 1999 in changelog)
AC_MSG_CHECKING(for sys_siglist declaration)
AC_TRY_COMPILE([#include <signal.h>], [
strlen (sys_siglist[0]);
], glib_ok=yes, glib_ok=no)
AC_MSG_RESULT($glib_ok)
if test $glib_ok = no; then
AC_DEFINE(NO_SYS_SIGLIST_DECL)
fi
# Check if <sys/select.h> needs to be included for fd_set
AC_MSG_CHECKING([for fd_set])
AC_TRY_COMPILE([#include <sys/types.h>],
[fd_set readMask, writeMask;], gtk_ok=yes, gtk_ok=no)
if test $gtk_ok = yes; then
AC_MSG_RESULT([yes, found in sys/types.h])
else
AC_HEADER_EGREP(fd_set, sys/select.h, gtk_ok=yes)
if test $gtk_ok = yes; then
AC_DEFINE(HAVE_SYS_SELECT_H)
AC_MSG_RESULT([yes, found in sys/select.h])
else
AC_DEFINE(NO_FD_SET)
AC_MSG_RESULT(no)
fi
fi
dnl *** check for sane realloc() ***
AC_MSG_CHECKING(whether realloc (NULL,) will work)
AC_CACHE_VAL(glib_cv_sane_realloc,[
AC_TRY_RUN([
#include <stdlib.h>
int main() {
return realloc (0, sizeof (int)) == 0;
}],
glib_cv_sane_realloc=yes
AC_DEFINE(REALLOC_0_WORKS)
,
glib_cv_sane_realloc=no
,)
])
AC_MSG_RESULT($glib_cv_sane_realloc)
dnl **********************
dnl *** va_copy checks ***
dnl **********************
dnl we currently check for all three va_copy possibilities, so we get
dnl all results in config.log for bug reports.
AC_MSG_CHECKING(for an implementation of va_copy())
AC_CACHE_VAL(glib_cv_va_copy,[
AC_TRY_RUN([
#include <stdarg.h>
void f (int i, ...) {
va_list args1, args2;
va_start (args1, i);
va_copy (args2, args1);
if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
exit (1);
va_end (args1); va_end (args2);
}
int main() {
f (0, 42);
return 0;
}],
glib_cv_va_copy=yes
,
glib_cv_va_copy=no
,)
])
AC_MSG_RESULT($glib_cv_va_copy)
AC_MSG_CHECKING(for an implementation of __va_copy())
AC_CACHE_VAL(glib_cv___va_copy,[
AC_TRY_RUN([
#include <stdarg.h>
void f (int i, ...) {
va_list args1, args2;
va_start (args1, i);
__va_copy (args2, args1);
if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
exit (1);
va_end (args1); va_end (args2);
}
int main() {
f (0, 42);
return 0;
}],
glib_cv___va_copy=yes
,
glib_cv___va_copy=no
,)
])
AC_MSG_RESULT($glib_cv___va_copy)
AC_MSG_CHECKING(whether va_lists can be copied by value)
AC_CACHE_VAL(glib_cv_va_val_copy,[
AC_TRY_RUN([
#include <stdarg.h>
void f (int i, ...) {
va_list args1, args2;
va_start (args1, i);
args2 = args1;
if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
exit (1);
va_end (args1); va_end (args2);
}
int main() {
f (0, 42);
return 0;
}],
glib_cv_va_val_copy=yes
,
glib_cv_va_val_copy=no
,)
])
if test "x$glib_cv_va_copy" = "xyes"; then
AC_DEFINE(G_VA_COPY, va_copy)
else if test "x$glib_cv___va_copy" = "xyes"; then
AC_DEFINE(G_VA_COPY, __va_copy)
fi
fi
if test "x$glib_cv_va_val_copy" = "xno"; then
AC_DEFINE(G_VA_COPY_AS_ARRAY)
fi
AC_MSG_RESULT($glib_cv_va_val_copy)
dnl ***********************
dnl *** g_module checks ***
dnl ***********************
G_MODULE_LIBS=
G_MODULE_LIBS_EXTRA=
G_MODULE_PLUGIN_LIBS=
G_MODULE_LDFLAGS=
dnl G_MODULE_IMPL= don't reset, so cmd-line can override
G_MODULE_NEED_USCORE=0
G_MODULE_HAVE_DLERROR=0
dnl *** dlopen() and dlsym() in system libraries
if test -z "$G_MODULE_IMPL"; then
AC_CHECK_FUNC(dlopen,
AC_CHECK_FUNC(dlsym,
G_MODULE_IMPL=G_MODULE_IMPL_DL
,)
,)
fi
dnl *** load_image (BeOS)
if test -z "$G_MODULE_IMPL" -a "x$glib_native_beos" = "xyes"; then
AC_CHECK_LIB(root, load_image,
G_MODULE_LIBS="-lbe -lroot -lglib"
G_MODULE_LIBS_EXTRA="-L\$(top_builddir_full)/.libs"
G_MODULE_PLUGIN_LIBS="-L\$(top_builddir_full)/gmodule/.libs -lgmodule"
G_MODULE_IMPL=G_MODULE_IMPL_BEOS
,)
fi
dnl *** dlopen() and dlsym() in libdl
if test -z "$G_MODULE_IMPL"; then
AC_CHECK_LIB(dl, dlopen,
AC_CHECK_LIB(dl, dlsym,
G_MODULE_LIBS=-ldl
G_MODULE_IMPL=G_MODULE_IMPL_DL
,)
,)
fi
dnl *** shl_load() in libdld (HP-UX)
if test -z "$G_MODULE_IMPL"; then
AC_MSG_CHECKING(how to export all symbols)
SAVED_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-E"
AC_TRY_LINK(,[ return 0; ],
[ G_MODULE_LDFLAGS="-Wl,-E" ],[
LDFLAGS="$SAVED_LDFLAGS -bexpall"
AC_TRY_LINK(,[ return 0; ],
G_MODULE_LDFLAGS="-bexpall",
G_MODULE_LDFLAGS="none"
)
])
LDFLAGS=$SAVED_LDFLAGS
AC_MSG_RESULT($G_MODULE_LDFLAGS)
if test "x$G_MODULE_LDFLAGS" = "xnone"; then
G_MODULE_LDFLAGS=
fi
AC_CHECK_LIB(dld, shl_load,
G_MODULE_LIBS=-ldld
G_MODULE_IMPL=G_MODULE_IMPL_DLD
,)
fi
dnl *** additional checks for G_MODULE_IMPL_DL
if test "$G_MODULE_IMPL" = "G_MODULE_IMPL_DL"; then
case "$host_os" in
linux*)
G_MODULE_LDFLAGS='-rdynamic'
;;
esac
LIBS_orig="$LIBS"
LDFLAGS_orig="$LDFLAGS"
LIBS="$LIBS $G_MODULE_LIBS"
LDFLAGS="$LDFLAGS $G_MODULE_LDFLAGS"
dnl *** check whether we need preceeding underscores
AC_MSG_CHECKING(for preceeding underscore in symbols)
AC_CACHE_VAL(glib_cv_uscore,[
AC_TRY_RUN([
#include <dlfcn.h>
int glib_underscore_test (void) { return 42; }
int main() {
void *f1 = (void*)0, *f2 = (void*)0, *handle;
handle = dlopen ((void*)0, 0);
if (handle) {
f1 = dlsym (handle, "glib_underscore_test");
f2 = dlsym (handle, "_glib_underscore_test");
} return (!f2 || f1);
}],
glib_cv_uscore=yes,
glib_cv_uscore=no,
)
rm -f plugin.c plugin.o plugin.lo
])
AC_MSG_RESULT($glib_cv_uscore)
if test "x$glib_cv_uscore" = "xyes"; then
G_MODULE_NEED_USCORE=1
else
G_MODULE_NEED_USCORE=0
fi
LDFLAGS="$LDFLAGS_orig"
dnl *** check for having dlerror()
AC_CHECK_FUNC(dlerror,
G_MODULE_HAVE_DLERROR=1,
G_MODULE_HAVE_DLERROR=0)
LIBS="$LIBS_orig"
fi
dnl *** done, have e got an implementation?
if test -z "$G_MODULE_IMPL"; then
G_MODULE_IMPL=0
fi
AC_SUBST(G_MODULE_IMPL)
AC_SUBST(G_MODULE_LIBS)
AC_SUBST(G_MODULE_LIBS_EXTRA)
AC_SUBST(G_MODULE_PLUGIN_LIBS)
AC_SUBST(G_MODULE_LDFLAGS)
AC_SUBST(G_MODULE_HAVE_DLERROR)
AC_SUBST(G_MODULE_NEED_USCORE)
AC_SUBST(GLIB_DEBUG_FLAGS)
dnl ***********************
dnl *** g_thread checks ***
dnl ***********************
AC_ARG_WITH(threads, [ --with-threads=[none/posix/dce/solaris] specify a thread implementation to use],
if test "x$with_threads" = x; then
want_threads=yes
else
want_threads=$with_threads
fi,
want_threads=yes)
if test "x$enable_threads" = "xno"; then
want_threads=no
fi
if test "x$want_threads" = "xnone"; then
want_threads=no
fi
dnl error and warning message
dnl *************************
THREAD_NO_IMPLEMENTATION="You do not have any known thread system on your
computer. GLib will not have a default thread implementation."
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
FLAG_DOES_NOT_WORK="I can't find the MACRO to enable thread safety on your
platform (normaly it's "_REENTRANT"). I'll not use any flag on
compilation now, but then your programs might not work.
Please provide information on how it is done on your system."
LIBS_NOT_FOUND_1="I can't find the libraries for the thread implementation
"
LIBS_NOT_FOUND_2=". Please choose another thread implementation or
provide information on your thread implementation.
You can also run 'configure --disable-threads'
to compile without thread support."
FUNC_NO_GETPWUID_R="the 'g_get_(user_name|real_name|home_dir|tmp_dir)'
functions will not be MT-safe during their first call because
there is no working 'getpwuid_r' on your system."
FUNC_NO_LOCALTIME_R="the 'g_date_set_time' function will not be MT-safe
because there is no 'localtime_r' on your system."
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
POSIX_NO_YIELD="I can not find a yield functions for your platform. A rather
crude surrogate will be used. If you happen to know a
yield function for your system, please inform the GLib
developers."
POSIX_NO_PRIORITIES="I can not find the minimal and maximal priorities for
threads on your system. Thus threads can only have the default
priority. If you happen to know these main/max
priorities, please inform the GLib developers."
dnl determination of thread implementation
dnl ***************************************
have_threads=none
if test "x$want_threads" = xyes || test "x$want_threads" = xsolaris; then
case $host in
*-*-solaris*)
AC_CHECK_LIB(thread, cond_init, have_threads=solaris)
;;
esac
fi
if test "x$want_threads" = xyes || test "x$want_threads" = xposix \
|| test "x$want_threads" = xdce; then
# -D_POSIX4A_DRAFT10_SOURCE is for DG/UX
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
# -U_OSF_SOURCE is for Digital UNIX 4.0d
GTHREAD_COMPILE_IMPL_DEFINES="-D_POSIX4A_DRAFT10_SOURCE -U_OSF_SOURCE"
glib_save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $GTHREAD_COMPILE_IMPL_DEFINES"
if test "x$have_threads" = xnone; then
AC_EGREP_HEADER([(^|[^a-zA-Z_])pthread_attr_init[^a-zA-Z_]],
pthread.h,
have_threads=posix)
fi
if test "x$have_threads" = xnone; then
AC_EGREP_HEADER([(^|[^a-zA-Z_])pthread_attr_create[^a-zA-Z_]],
pthread.h,
have_threads=dce)
fi
CPPFLAGS="$glib_save_CPPFLAGS"
fi
AC_MSG_CHECKING(for thread implementation)
if test "x$have_threads" = xnone && test "x$want_threads" != xno; then
AC_MSG_RESULT(none available)
AC_MSG_WARN($THREAD_NO_IMPLEMENTATION)
else
AC_MSG_RESULT($have_threads)
fi
dnl determination of G_THREAD_LIBS
dnl ******************************
G_THREAD_LIBS=
G_THREAD_LIBS_EXTRA=
G_THREAD_CFLAGS=
mutex_has_default=no
case $have_threads in
posix|dce)
G_THREAD_LIBS=error
glib_save_LIBS="$LIBS"
for thread_lib in "" pthread pthreads c_r thread dce; do
if test x"$thread_lib" = x; then
add_thread_lib=""
IN=""
else
add_thread_lib="-l$thread_lib"
IN=" in -l$thread_lib"
fi
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
if test x"$have_threads" = xposix; then
defattr=NULL
else
defattr=pthread_attr_default
fi
LIBS="$glib_save_LIBS $add_thread_lib"
AC_MSG_CHECKING(for pthread_create$IN)
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
AC_TRY_RUN([#include <pthread.h>
void* func(void* data) {}
main()
{ pthread_t t;
exit(pthread_create (&t, $defattr, func,
NULL));
}],
[AC_MSG_RESULT(yes)
G_THREAD_LIBS="$add_thread_lib"
break],
[AC_MSG_RESULT(no)])
done
for thread_lib in "" rt; do
if test x"$thread_lib" = x; then
add_thread_lib=""
IN=""
else
add_thread_lib="-l$thread_lib"
IN=" in -l$thread_lib"
fi
LIBS="$glib_save_LIBS $add_thread_lib"
AC_MSG_CHECKING(for sched_get_priority_min$IN)
AC_TRY_RUN([#include <sched.h>
#include <errno.h>
int main() {
errno = 0;
return sched_get_priority_min(SCHED_OTHER)==-1
&& errno != 0;
}],
[AC_MSG_RESULT(yes)
G_THREAD_LIBS="$G_THREAD_LIBS $add_thread_lib"
posix_priority_min="sched_get_priority_min(SCHED_OTHER)"
posix_priority_max="sched_get_priority_max(SCHED_OTHER)"
break],
[AC_MSG_RESULT(no)])
done
LIBS="$glib_save_LIBS"
mutex_has_default=yes
mutex_default_type='pthread_mutex_t'
mutex_default_init='PTHREAD_MUTEX_INITIALIZER'
mutex_header_file='pthread.h'
if test "x$have_threads" = "xposix"; then
g_threads_impl="POSIX"
else
g_threads_impl="DCE"
have_threads="posix"
fi
AC_SUBST(GTHREAD_COMPILE_IMPL_DEFINES)
;;
solaris)
G_THREAD_LIBS=error
AC_CHECK_LIB(thread, cond_init, G_THREAD_LIBS="-lthread")
mutex_has_default=yes
mutex_default_type='mutex_t'
mutex_default_init="DEFAULTMUTEX"
mutex_header_file='thread.h'
g_threads_impl="SOLARIS"
;;
none)
g_threads_impl="NONE"
;;
*)
g_threads_impl="NONE"
G_THREAD_LIBS=error
;;
esac
if test "x$G_THREAD_LIBS" = xerror; then
AC_MSG_ERROR($LIBS_NOT_FOUND_1$have_threads$LIBS_NOT_FOUND_2)
fi
case $host in
*-*-beos*)
G_THREAD_LIBS="-lbe -lroot -lglib "
G_THREAD_LIBS_EXTRA="-L\$(top_builddir_full)/.libs"
;;
*)
;;
esac
AC_MSG_CHECKING(thread related libraries)
AC_MSG_RESULT($G_THREAD_LIBS)
dnl determination of G_THREAD_CFLAGS
dnl ********************************
if test x"$enable_threads" = xyes; then
G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_REENTRANT" # good default guess
case $host in
*-aix*)
G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_THREAD_SAFE"
if test x"$GCC" = xyes; then
G_THREAD_CFLAGS="$G_THREAD_CFLAGS -mthreads"
fi
;;
*-freebsd2.2*)
G_THREAD_CFLAGS="$G_THREAD_CFLAGS -D_THREAD_SAFE"
# FreeBSD 2.2.x shiped with gcc 2.7.2.x, which doesn't support
# -mthreads flag.
;;
esac
# if we are not finding the ctime_r function, then we probably are
# not using the proper multithread flag
old_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS $G_THREAD_CFLAGS"
# Note: Digital UNIX 4.0d #defines ctime_r to _Pctime_r for gcc.
AC_EGREP_HEADER([[^a-zA-Z_](_P)?ctime_r[^a-zA-Z_]], time.h, ,
G_THREAD_CFLAGS=
AC_MSG_WARN($FLAG_DOES_NOT_WORK))
CPPFLAGS=$old_CPPFLAGS
AC_MSG_CHECKING(thread related cflags)
AC_MSG_RESULT($G_THREAD_CFLAGS)
else
G_THREAD_CFLAGS=
fi
dnl check for mt safe function variants and some posix functions
dnl ************************************************************
if test x"$enable_threads" = xyes; then
glib_save_LIBS="$LIBS"
glib_save_CFLAGS="$CFLAGS"
# we are not doing the following for now, as this might require glib
# to always be linked with the thread libs on some platforms.
# LIBS="$LIBS $G_THREAD_LIBS"
CFLAGS="$CFLAGS $G_THREAD_CFLAGS"
AC_CHECK_FUNCS(localtime_r)
if test "$ac_cv_header_pwd_h" = "yes"; then
AC_MSG_CHECKING([for getpwuid_r])
AC_CACHE_VAL(ac_cv_func_getpwuid_r,
[AC_TRY_RUN([#include <errno.h>
int main () { char buffer[10000], *pointer;
char getpwuid_r (long, void*, void*,
int, void*);
errno = 0;
getpwuid_r (0, &buffer, &buffer,
sizeof (buffer), &pointer);
return errno == ENOSYS;}],
[ac_cv_func_getpwuid_r=yes],
[ac_cv_func_getpwuid_r=no])])
if test "$ac_cv_func_getpwuid_r" = yes; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_GETPWUID_R)
else
AC_MSG_RESULT(no)
fi
if test "$ac_cv_func_getpwuid_r" = "yes"; then
AC_MSG_CHECKING(whether getpwuid_r is posix like)
# The signature for the POSIX version is:
# int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **)
AC_TRY_COMPILE([#include <pwd.h>
#include <sys/types.h>
#include <stdlib.h>],
[getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);],
[AC_DEFINE(HAVE_GETPWUID_R_POSIX)
AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(no)])
fi
fi
LIBS="$LIBS $G_THREAD_LIBS"
if test x"$have_threads" = xposix; then
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
glib_save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $GTHREAD_COMPILE_IMPL_DEFINES"
GLIB_SIZEOF([#include <pthread.h>],
pthread_t,
system_thread)
# This is not AC_CHECK_FUNC to also work with function
# name mangling in header files.
AC_MSG_CHECKING(for pthread_attr_setstacksize)
AC_TRY_LINK([#include <pthread.h>],
[pthread_attr_t t; pthread_attr_setstacksize(&t,0)],
[AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_PTHREAD_ATTR_SETSTACKSIZE)],
[AC_MSG_RESULT(no)])
AC_MSG_CHECKING(for minimal/maximal thread priority)
if test x"$posix_priority_min" = xnone; then
AC_EGREP_CPP(PX_PRIO_MIN,[#include <pthread.h>
PX_PRIO_MIN],,[
posix_priority_min=PX_PRIO_MIN
posix_priority_max=PX_PRIO_MAX])
fi
if test x"$posix_priority_min" = xnone; then
AC_EGREP_CPP(PRI_OTHER_MIN,[#include <pthread.h>
PRI_OTHER_MIN],,[
posix_priority_min=PRI_OTHER_MIN
posix_priority_max=PRI_OTHER_MAX])
fi
if test x"$posix_priority_min" = x; then
AC_MSG_RESULT(none found)
AC_MSG_WARN($POSIX_NO_PRIORITIES)
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
posix_priority_min=-1
posix_priority_max=-1
else
AC_MSG_RESULT($posix_priority_min/$posix_priority_max)
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
AC_DEFINE_UNQUOTED(POSIX_MIN_PRIORITY,$posix_priority_min)
AC_DEFINE_UNQUOTED(POSIX_MAX_PRIORITY,$posix_priority_max)
fi
posix_yield_func=none
AC_MSG_CHECKING(for posix yield function)
for yield_func in sched_yield pthread_yield_np pthread_yield \
thr_yield; do
AC_TRY_LINK([#include <pthread.h>],
[$yield_func()],
[posix_yield_func="$yield_func"
break])
done
if test x"$posix_yield_func" = xnone; then
AC_MSG_RESULT(none found)
AC_MSG_WARN($POSIX_NO_YIELD)
posix_yield_func="g_usleep(1000)"
else
AC_MSG_RESULT($posix_yield_func)
posix_yield_func="$posix_yield_func()"
fi
AC_DEFINE_UNQUOTED(POSIX_YIELD_FUNC,$posix_yield_func)
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
CPPFLAGS="$glib_save_CPPFLAGS"
else # solaris threads
GLIB_SIZEOF([#include <thread.h>],
thread_t,
system_thread)
fi
LIBS="$glib_save_LIBS"
CFLAGS="$glib_save_CFLAGS"
# now spit out all the warnings.
if test "$ac_cv_func_getpwuid_r" != "yes"; then
AC_MSG_WARN($FUNC_NO_GETPWUID_R)
fi
if test "$ac_cv_func_localtime_r" != "yes"; then
AC_MSG_WARN($FUNC_NO_LOCALTIME_R)
fi
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
else
# If no thread implementation exists, we will provide enough
# space for a pointer
GLIB_SIZEOF(, void*, system_thread)
fi
AC_DEFINE_UNQUOTED(G_THREAD_SOURCE,"gthread-$have_threads.c")
AC_SUBST(G_THREAD_CFLAGS)
AC_SUBST(G_THREAD_LIBS)
AC_SUBST(G_THREAD_LIBS_EXTRA)
CFLAGS="$CFLAGS $G_THREAD_CFLAGS"
dnl **********************************************
dnl *** GDefaultMutex setup and initialization ***
dnl **********************************************
dnl
dnl if mutex_has_default = yes, we also got
dnl mutex_default_type, mutex_default_init and mutex_header_file
GLIB_IF_VAR_EQ(mutex_has_default, yes,
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
glib_save_CPPFLAGS="$CPPFLAGS"
glib_save_LIBS="$LIBS"
LIBS="$LIBS $G_THREAD_LIBS"
CPPFLAGS="$CPPFLAGS $GTHREAD_COMPILE_IMPL_DEFINES"
GLIB_SIZEOF([#include <$mutex_header_file>],
$mutex_default_type,
gmutex,
)
GLIB_BYTE_CONTENTS([#include <$mutex_header_file>],
$mutex_default_type,
gmutex,
$glib_cv_sizeof_gmutex,
$mutex_default_init)
if test x"$glib_cv_byte_contents_gmutex" = xno; then
mutex_has_default=no
fi
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
CPPFLAGS="$glib_save_CPPFLAGS"
LIBS="$glib_save_LIBS"
,
)
dnl ****************************************
dnl *** GLib POLL* compatibility defines ***
dnl ****************************************
GLIB_SYSDEFS(
[#include <sys/types.h>
#include <sys/poll.h>],
POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32,
glibconfig-sysdefs.h,
=)
dnl ******************************
dnl *** output the whole stuff ***
dnl ******************************
AC_OUTPUT_COMMANDS([
## Generate `glibconfig.h' in two cases
## 1. `config.status' is run either explicitly, or via configure.
## Esp. not when it is run in `Makefile' to generate makefiles and
## config.h
## 2. CONFIG_OTHER is set explicitly
##
## Case 1 is difficult. We know that `automake' sets one of
## CONFIG_FILES or CONFIG_HEADERS to empty. This heuristic works
## only when AM_CONFIG_HEADER is set, however.
if test -n "${CONFIG_FILES}" && test -n "${CONFIG_HEADERS}"; then
# Both CONFIG_FILES and CONFIG_HEADERS are non-empty ==> Case 1
CONFIG_OTHER=${CONFIG_OTHER:-glibconfig.h}
fi
case "$CONFIG_OTHER" in
*glibconfig.h*)
echo creating glibconfig.h
outfile=glibconfig.h-tmp
cat > $outfile <<\_______EOF
/* glibconfig.h
*
* This is a generated file. Please modify `configure.in'
*/
#ifndef GLIBCONFIG_H
#define GLIBCONFIG_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
_______EOF
if test x$glib_limits_h = xyes; then
echo '#include <limits.h>' >> $outfile
fi
if test x$glib_float_h = xyes; then
echo '#include <float.h>' >> $outfile
fi
if test x$glib_values_h = xyes; then
echo '#include <values.h>' >> $outfile
fi
if test x$g_mutex_header_file != x; then
echo '#include <'"$g_mutex_header_file"'>' >> $outfile
fi
if test x$glib_sys_poll_h = xyes; then
echo '#define GLIB_HAVE_SYS_POLL_H' >> $outfile
fi
cat >> $outfile <<_______EOF
#define G_MINFLOAT $glib_mf
#define G_MAXFLOAT $glib_Mf
#define G_MINDOUBLE $glib_md
#define G_MAXDOUBLE $glib_Md
#define G_MINSHORT $glib_ms
#define G_MAXSHORT $glib_Ms
#define G_MAXUSHORT $glib_Mus
#define G_MININT $glib_mi
#define G_MAXINT $glib_Mi
#define G_MAXUINT $glib_Mui
#define G_MINLONG $glib_ml
#define G_MAXLONG $glib_Ml
#define G_MAXULONG $glib_Mul
_______EOF
### this should always be true in a modern C/C++ compiler
cat >>$outfile <<_______EOF
typedef signed char gint8;
typedef unsigned char guint8;
_______EOF
if test -n "$gint16"; then
cat >>$outfile <<_______EOF
typedef signed $gint16 gint16;
typedef unsigned $gint16 guint16;
#define G_GINT16_FORMAT $gint16_format
#define G_GUINT16_FORMAT $guint16_format
_______EOF
fi
if test -n "$gint32"; then
cat >>$outfile <<_______EOF
typedef signed $gint32 gint32;
typedef unsigned $gint32 guint32;
#define G_GINT32_FORMAT $gint32_format
#define G_GUINT32_FORMAT $guint32_format
_______EOF
fi
if test -n "$gint64"; then
cat >>$outfile <<_______EOF
#define G_HAVE_GINT64 1
${glib_extension}typedef signed $gint64 gint64;
${glib_extension}typedef unsigned $gint64 guint64;
#define G_GINT64_FORMAT $gint64_format
#define G_GUINT64_FORMAT $guint64_format
#define G_GINT64_CONSTANT(val) $gint64_constant
_______EOF
fi
if test -z "$glib_unknown_void_p"; then
cat >>$outfile <<_______EOF
#define GPOINTER_TO_INT(p) ((gint) ${glib_gpi_cast} (p))
#define GPOINTER_TO_UINT(p) ((guint) ${glib_gpui_cast} (p))
#define GINT_TO_POINTER(i) ((gpointer) ${glib_gpi_cast} (i))
#define GUINT_TO_POINTER(u) ((gpointer) ${glib_gpui_cast} (u))
_______EOF
else
echo '#error SIZEOF_VOID_P unknown - This should never happen' >>$outfile
fi
cat >>$outfile <<_______EOF
$glib_atexit
$glib_memmove
$glib_defines
$glib_os
$glib_vacopy
#ifdef __cplusplus
#define G_HAVE_INLINE 1
#else /* !__cplusplus */
$glib_inline
#endif /* !__cplusplus */
_______EOF
echo >>$outfile
if test x$g_mutex_has_default = xyes; then
cat >>$outfile <<_______EOF
$g_enable_threads_def G_THREADS_ENABLED
#define G_THREADS_IMPL_$g_threads_impl_def
typedef struct _GStaticMutex GStaticMutex;
struct _GStaticMutex
{
struct _GMutex *runtime_mutex;
union {
char pad[$g_mutex_sizeof];
double dummy_double;
void *dummy_pointer;
long dummy_long;
} aligned_pad_u;
};
#define G_STATIC_MUTEX_INIT { NULL, { { $g_mutex_contents} } }
#define g_static_mutex_get_mutex(mutex) \
(g_thread_use_default_impl ? ((GMutex*) &((mutex)->aligned_pad_u)) : \
g_static_mutex_get_mutex_impl (&((mutex)->runtime_mutex)))
_______EOF
else
cat >>$outfile <<_______EOF
$g_enable_threads_def G_THREADS_ENABLED
#define G_THREADS_IMPL_$g_threads_impl_def
typedef struct _GMutex* GStaticMutex;
#define G_STATIC_MUTEX_INIT NULL
#define g_static_mutex_get_mutex(mutex) (g_static_mutex_get_mutex_impl (mutex))
_______EOF
fi
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
cat >>$outfile <<_______EOF
/* This represents a system thread as used by the implementation. An
* alien implementaion, as loaded by g_thread_init can only count on
* "sizeof (gpointer)" bytes to store their info. We however need more
* for some of our native implementations. */
typedef union _GSystemThread GSystemThread;
union _GSystemThread
{
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
char data[$g_system_thread_sizeof];
double dummy_double;
void *dummy_pointer;
long dummy_long;
};
_______EOF
echo >>$outfile
g_bit_sizes="16 32"
if test -n "$gint64"; then
g_bit_sizes="$g_bit_sizes 64"
fi
for bits in $g_bit_sizes; do
cat >>$outfile <<_______EOF
#define GINT${bits}_TO_${g_bs_native}(val) ((gint${bits}) (val))
#define GUINT${bits}_TO_${g_bs_native}(val) ((guint${bits}) (val))
#define GINT${bits}_TO_${g_bs_alien}(val) ((gint${bits}) GUINT${bits}_SWAP_LE_BE (val))
#define GUINT${bits}_TO_${g_bs_alien}(val) (GUINT${bits}_SWAP_LE_BE (val))
_______EOF
done
cat >>$outfile <<_______EOF
#define GLONG_TO_LE(val) ((glong) GINT${glongbits}_TO_LE (val))
#define GULONG_TO_LE(val) ((gulong) GUINT${glongbits}_TO_LE (val))
#define GLONG_TO_BE(val) ((glong) GINT${glongbits}_TO_BE (val))
#define GULONG_TO_BE(val) ((gulong) GUINT${glongbits}_TO_BE (val))
#define GINT_TO_LE(val) ((gint) GINT${gintbits}_TO_LE (val))
#define GUINT_TO_LE(val) ((guint) GUINT${gintbits}_TO_LE (val))
#define GINT_TO_BE(val) ((gint) GINT${gintbits}_TO_BE (val))
#define GUINT_TO_BE(val) ((guint) GUINT${gintbits}_TO_BE (val))
#define G_BYTE_ORDER $g_byte_order
_______EOF
if test -r glibconfig-sysdefs.h; then
cat glibconfig-sysdefs.h >>$outfile
fi
cat >>$outfile <<_______EOF
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* GLIBCONFIG_H */
_______EOF
if cmp -s $outfile glibconfig.h; then
echo glibconfig.h is unchanged
rm -f $outfile
else
mv $outfile glibconfig.h
fi ;;
esac
],[
# Note that if two cases are the same, case goes with the first one.
# Note also that this is inside an AC_OUTPUT_COMMAND. We do not depend
# on variable expansion in case labels. Look at the generated config.status
# for a hint.
case xyes in
x$ac_cv_header_float_h)
glib_float_h=yes
glib_mf=FLT_MIN glib_Mf=FLT_MAX
glib_md=DBL_MIN glib_Md=DBL_MAX
;;
x$ac_cv_header_values_h)
glib_values_h=yes
glib_mf=MINFLOAT glib_Mf=MAXFLOAT
glib_md=MINDOUBLE glib_Md=MAXDOUBLE
;;
esac
case xyes in
x$ac_cv_header_limits_h)
glib_limits_h=yes
glib_ms=SHRT_MIN glib_Ms=SHRT_MAX glib_Mus=USHRT_MAX
glib_mi=INT_MIN glib_Mi=INT_MAX glib_Mui=UINT_MAX
glib_ml=LONG_MIN glib_Ml=LONG_MAX glib_Mul=ULONG_MAX
;;
x$ac_cv_header_values_h)
glib_values_h=yes
glib_ms=MINSHORT glib_Ms=MAXSHORT glib_Mus="(((gushort)G_MAXSHORT)*2+1)"
glib_mi=MININT glib_Mi=MAXINT glib_Mui="(((guint)G_MAXINT)*2+1)"
glib_ml=MINLONG glib_Ml=MAXLONG glib_Mul="(((gulong)G_MAXLONG)*2+1)"
;;
esac
if test x$ac_cv_header_sys_poll_h = xyes ; then
glib_sys_poll_h=yes
fi
case 2 in
$ac_cv_sizeof_short)
gint16=short
gint16_format='"hi"'
guint16_format='"hu"'
;;
$ac_cv_sizeof_int)
gint16=int
gint16_format='"i"'
guint16_format='"u"'
;;
esac
case 4 in
$ac_cv_sizeof_short)
gint32=short
gint32_format='"hi"'
guint32_format='"hu"'
;;
$ac_cv_sizeof_int)
gint32=int
gint32_format='"i"'
guint32_format='"u"'
;;
$ac_cv_sizeof_long)
gint32=long
gint32_format='"li"'
guint32_format='"lu"'
;;
esac
case 8 in
$ac_cv_sizeof_int)
gint64=int
gint64_format='"i"'
guint64_format='"u"'
glib_extension=
gint64_constant='(val)'
;;
$ac_cv_sizeof_long)
gint64=long
gint64_format='"li"'
guint64_format='"lu"'
glib_extension=
gint64_constant='(val##L)'
;;
$ac_cv_sizeof_long_long)
gint64='long long'
gint64_format='"'$glib_cv_long_long_format'i"'
guint64_format='"'$glib_cv_long_long_format'u"'
glib_extension='G_GNUC_EXTENSION '
gint64_constant='(G_GNUC_EXTENSION (val##LL))'
;;
esac
gintbits=`expr $ac_cv_sizeof_int \* 8`
glongbits=`expr $ac_cv_sizeof_long \* 8`
case $ac_cv_sizeof_void_p in
$ac_cv_sizeof_int) glib_gpi_cast='' glib_gpui_cast='' ;;
$ac_cv_sizeof_long) glib_gpi_cast='(glong)' glib_gpui_cast='(gulong)' ;;
*) glib_unknown_void_p=yes ;;
esac
case xyes in
x$ac_cv_func_atexit)
glib_atexit="
#ifdef NeXT /* @#%@! NeXTStep */
# define g_ATEXIT(proc) (!atexit (proc))
#else
# define g_ATEXIT(proc) (atexit (proc))
#endif"
;;
x$ac_cv_func_on_exit)
glib_atexit="
#define g_ATEXIT(proc) (on_exit ((void (*)(int, void*))(proc), NULL))"
;;
esac
case xyes in
x$ac_cv_func_memmove)
glib_memmove='
#define g_memmove(d,s,n) G_STMT_START { memmove ((d), (s), (n)); } G_STMT_END'
;;
x$glib_cv_working_bcopy)
glib_memmove="
/* memmove isn't available, but bcopy can copy overlapping memory regions */
#define g_memmove(d,s,n) G_STMT_START { bcopy ((s), (d), (n)); } G_STMT_END"
;;
*)
glib_memmove="
/* memmove isn't found and bcopy can't copy overlapping memory regions,
* so we have to roll our own copy routine. */
void g_memmove (void* dest, const void * src, unsigned long len);"
;;
esac
glib_defines="
#define GLIB_MAJOR_VERSION $GLIB_MAJOR_VERSION
#define GLIB_MINOR_VERSION $GLIB_MINOR_VERSION
#define GLIB_MICRO_VERSION $GLIB_MICRO_VERSION
"
case xyes in
x$glib_cv_va_copy) glib_vacopy='#define G_VA_COPY va_copy' ;;
x$glib_cv___va_copy) glib_vacopy='#define G_VA_COPY __va_copy' ;;
*) glib_vacopy=''
esac
if test x$glib_cv_va_val_copy = xno; then
glib_vacopy="\$glib_vacopy
#define G_VA_COPY_AS_ARRAY 1"
fi
if test x$glib_cv_hasinline = xyes; then
glib_inline='#define G_HAVE_INLINE 1'
fi
if test x$glib_cv_has__inline = xyes; then
glib_inline="\$glib_inline
#define G_HAVE___INLINE 1"
fi
if test x$glib_cv_has__inline__ = xyes; then
glib_inline="\$glib_inline
#define G_HAVE___INLINE__ 1"
fi
case xyes in
x$ac_cv_c_bigendian)
g_byte_order=G_BIG_ENDIAN
g_bs_native=BE
g_bs_alien=LE
;;
*)
g_byte_order=G_LITTLE_ENDIAN
g_bs_native=LE
g_bs_alien=BE
;;
esac
case x$enable_threads in
xyes) g_enable_threads_def="#define";;
*) g_enable_threads_def="#undef ";;
esac
g_threads_impl_def=$g_threads_impl
g_mutex_has_default="$mutex_has_default"
g_mutex_sizeof="$glib_cv_sizeof_gmutex"
Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. 2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de> * configure.in: Added the missing POSIX_NO_YIELD and POSIX_NO_PRIORITIES warning messages. * configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for real thread support. On solaris pthread_create can be linked to even in -lc, but it doesn't work then. * configure.in: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * configure.in, gthread.c: Always define GSystemThread in glibconfig.h to represent a system thread. * configure.in: Do not use native recursive threads, when possibe. We use some features, that they do not expose (namely the depth counter). * glib.h, gthread.c: Redefined GStaticRecMutex. The functions are now implemented in a different way, which should be way faster. Alsothere are now functions g_static_rec_mutex_unlock_full and g_static_rec_mutex_lock_full to leave/enter a recursive mutex completly. * gthread.c (g_thread_self): Do not test the system_thread to be non-zero to speed things up. * gthread.c (g_mutex_init): Therefore set the system_thread of the main thread here. * tests/thread-test.c: Rerun all tests once again, but this time we fool the system into thinking, that the available thread system is not native, but userprovided. * gthread/gthread-posix.c: Don't use priorities for threads, when the minimal/maximal priorities couldn't be determined at configure time. * gthread/gthread-posix.c: Don't check for errors, when setting the scope of a tread to system, as some posix implementations can't do that and we don't want the thing to fail because of that.
2000-03-17 15:49:59 +01:00
g_system_thread_sizeof="$glib_cv_sizeof_system_thread"
g_mutex_contents="$glib_cv_byte_contents_gmutex"
case $host in
*-*-beos*)
glib_os="#define G_OS_BEOS"
;;
*-*-cygwin*)
glib_os="#define G_OS_UNIX
#define G_WITH_CYGWIN"
;;
*)
glib_os="#define G_OS_UNIX"
;;
esac
])
AC_OUTPUT([
glib.spec
Makefile
glib-config
gmodule/gmoduleconf.h
gmodule/Makefile
gthread/Makefile
docs/Makefile
docs/glib-config.1
tests/Makefile
],[case "$CONFIG_FILES" in
*glib-config*)chmod +x glib-config;;
esac
echo ""
echo " *** IMPORTANT *** "
echo ""
echo "This is a development version of GLib. You should be using a stable"
echo "version, which is available at ftp://ftp.gtk.org/pub/gtk/v1.2/. The"
echo "version you just configured is meant for developers of GLib only:"
echo ""
echo " * You should not base stable software on this version of GLib."
echo " * GNOME developers should use a stable version of GLib."
echo ""
echo "Distributions should *NOT* ship a development package of this GLib."
echo "Do not ship the headers and do not ship the glib-config script. These"
echo "things will conflict with the stable 1.2 series. Package only enough"
echo "to satisfy the requirements of some other package. Package only the"
echo "library itself. Doing otherwise will do no favors to the community."
echo ""
echo "If you install this version of GLib, we strongly recommend that you"
echo "install it in a different prefix than GLib 1.2. Use --prefix as an"
echo "argument to configure to do this. Otherwise, you will not be able to"
echo "do development with GLib 1.2 any longer."
echo ""
echo " *** You should be using GLib 1.2 instead. ***"
])