Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
include $(top_srcdir)/glib.mk
|
initialize automake variables EXTRA_DIST and TEST_PROGS for unconditional
2007-11-21 21:06:47 Tim Janik <timj@imendio.com>
* Makefile.decl: initialize automake variables EXTRA_DIST and
TEST_PROGS for unconditional appending via += in other makefiles.
define recursive test targets: test, test-report, perf-report,
full-report, as described here:
http://mail.gnome.org/archives/gtk-devel-list/2007-November/msg00000.html
* Makefile.am:
* build/win32/vs8/Makefile.am, build/win32/dirent/Makefile.am:
* build/win32/Makefile.am, build/Makefile.am:
* docs/Makefile.am, docs/reference/Makefile.am:
* docs/reference/glib/Makefile.am, docs/reference/gobject/Makefile.am:
* gmodule/Makefile.am, tests/Makefile.am:
* tests/refcount/Makefile.am, tests/gobject/Makefile.am:
* glib/update-pcre/Makefile.am, glib/libcharset/Makefile.am:
* glib/tests/Makefile.am, glib/pcre/Makefile.am:
* glib/gnulib/Makefile.am, gobject/Makefile.am, m4macros/Makefile.am:
* gthread/Makefile.am, glib/Makefile.am:
include $(top_srcdir)/Makefile.decl, adapted EXTRA_DIST assignments.
* glib/tests/Makefile.am: removed example testing rules.
* glib/tests/testing.c: conditionalized performance and slow tests.
* glib/gtestutils.h:
* glib/gtestutils.c: work around g_test_config_vars not changing its
exported value after value assignments, aparently due to symbol aliases.
* glib/gtester.c: fixed off-by-one error which produced junk in logs.
* configure.in: check for python >= 2.4 and provide $PYTHON for scripts.
svn path=/trunk/; revision=5914
2007-11-21 21:09:46 +01:00
|
|
|
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
LDADD = $(top_builddir)/glib/libglib-2.0.la $(top_builddir)/gobject/libgobject-2.0.la
|
|
|
|
|
AM_CPPFLAGS = $(gmodule_INCLUDES) $(GLIB_DEBUG_FLAGS)
|
|
|
|
|
DEFS = -DGLIB_DISABLE_DEPRECATION_WARNINGS
|
|
|
|
|
AM_CFLAGS = -g
|
Make refcounting threadsafe by using atomic operations. (#166020, Wim
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-15 18:51:10 +02:00
|
|
|
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
# These are not gtester tests, so handle them manually
|
|
|
|
|
TESTS = \
|
2005-08-01 23:47:15 +02:00
|
|
|
closures \
|
Make refcounting threadsafe by using atomic operations. (#166020, Wim
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-15 18:51:10 +02:00
|
|
|
objects \
|
|
|
|
|
objects2 \
|
|
|
|
|
properties \
|
2005-08-01 23:47:15 +02:00
|
|
|
properties2 \
|
2010-07-22 21:52:54 +02:00
|
|
|
properties3 \
|
|
|
|
|
properties4 \
|
2005-08-01 23:47:15 +02:00
|
|
|
signal1 \
|
|
|
|
|
signal2 \
|
2012-07-19 16:38:59 +02:00
|
|
|
signal3 \
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
signal4 \
|
|
|
|
|
$(NULL)
|
2005-08-01 23:47:15 +02:00
|
|
|
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
TESTS_ENVIRONMENT = srcdir=$(srcdir) \
|
|
|
|
|
LIBCHARSET_ALIAS_DIR=$(top_builddir)/glib/libcharset
|
Make refcounting threadsafe by using atomic operations. (#166020, Wim
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-15 18:51:10 +02:00
|
|
|
|
|
|
|
|
signal1_SOURCES = signals.c
|
|
|
|
|
signal1_CFLAGS = -DTESTNUM=1 $(AM_CFLAGS)
|
|
|
|
|
signal2_SOURCES = signals.c
|
|
|
|
|
signal2_CFLAGS = -DTESTNUM=2 $(AM_CFLAGS)
|
|
|
|
|
signal3_SOURCES = signals.c
|
|
|
|
|
signal3_CFLAGS = -DTESTNUM=3 $(AM_CFLAGS)
|
2012-07-19 16:38:59 +02:00
|
|
|
signal4_SOURCES = signals.c
|
|
|
|
|
signal4_CFLAGS = -DTESTNUM=4 $(AM_CFLAGS)
|
Make refcounting threadsafe by using atomic operations. (#166020, Wim
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-15 18:51:10 +02:00
|
|
|
|
Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
2013-05-30 06:07:32 +02:00
|
|
|
check_PROGRAMS += $(TESTS)
|
