glib/acinclude.m4

774 lines
26 KiB
Plaintext
Raw Normal View History

## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##
## As a special exception to the GNU General Public License, if you
## distribute this file as part of a program that contains a
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# Modified to never use included libintl.
# Owen Taylor <otaylor@redhat.com>, 12/15/1998
#
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
#
#
# If you make changes to this file, you MUST update the copy in
# acinclude.m4. [ aclocal dies on duplicate macros, so if
# we run 'aclocal -I macros/' then we'll run into problems
# once we've installed glib-gettext.m4 :-( ]
#
# serial 5
AC_DEFUN(AM_GLIB_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
# AC_DEFINE(ENABLE_NLS)
# AC_MSG_CHECKING([whether included gettext is requested])
# AC_ARG_WITH(included-gettext,
# [ --with-included-gettext use the GNU gettext library included here],
# nls_cv_force_use_gnu_gettext=$withval,
# nls_cv_force_use_gnu_gettext=no)
# AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_force_use_gnu_gettext="no"
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])
if test "$gt_cv_func_dgettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for dgettext in libintl],
gt_cv_func_dgettext_libintl,
[AC_CHECK_LIB(intl, dgettext,
gt_cv_func_dgettext_libintl=yes,
gt_cv_func_dgettext_libintl=no)],
gt_cv_func_dgettext_libintl=no)])
fi
if test "$gt_cv_func_dgettext_libintl" = "yes"; then
LIBS="$LIBS -lintl";
fi
if test "$gt_cv_func_dgettext_libc" = "yes" \
|| test "$gt_cv_func_dgettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT)
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
# Added by Martin Baulig 12/15/98 for libc5 systems
if test "$gt_cv_func_dgettext_libc" != "yes" \
&& test "$gt_cv_func_dgettext_libintl" = "yes"; then
INTLLIBS=-lintl
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
fi
])
# if test "$CATOBJEXT" = "NONE"; then
# AC_MSG_CHECKING([whether catgets can be used])
# AC_ARG_WITH(catgets,
# [ --with-catgets use catgets functions if available],
# nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
# AC_MSG_RESULT($nls_cv_use_catgets)
#
# if test "$nls_cv_use_catgets" = "yes"; then
# dnl No gettext in C library. Try catgets next.
# AC_CHECK_LIB(i, main)
# AC_CHECK_FUNC(catgets,
# [AC_DEFINE(HAVE_CATGETS)
# INTLOBJS="\$(CATOBJS)"
# AC_PATH_PROG(GENCAT, gencat, no)dnl
# if test "$GENCAT" != "no"; then
# AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
# if test "$GMSGFMT" = "no"; then
# AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
# fi
# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
# USE_INCLUDED_LIBINTL=yes
# CATOBJEXT=.cat
# INSTOBJEXT=.cat
# DATADIRNAME=lib
# INTLDEPS='$(top_builddir)/intl/libintl.a'
# INTLLIBS=$INTLDEPS
# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
# nls_cv_header_intl=intl/libintl.h
# nls_cv_header_libgt=intl/libgettext.h
# fi
# ])
# fi
# fi
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" != "yes"; then
AC_DEFINE(ENABLE_NLS)
else
dnl Unset this variable since we use the non-zero value as a flag.
CATOBJEXT=
# dnl Mark actions used to generate GNU NLS library.
# INTLOBJS="\$(GETTOBJS)"
# AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
# AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
# AC_SUBST(MSGFMT)
# USE_INCLUDED_LIBINTL=yes
# CATOBJEXT=.gmo
# INSTOBJEXT=.mo
# DATADIRNAME=share
# INTLDEPS='$(top_builddir)/intl/libintl.a'
# INTLLIBS=$INTLDEPS
# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
# nls_cv_header_intl=intl/libintl.h
# nls_cv_header_libgt=intl/libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext program is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
AC_OUTPUT_COMMANDS(
[case "$CONFIG_FILES" in *po/Makefile.in*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac])
# # If this is used in GNU gettext we have to set USE_NLS to `yes'
# # because some of the sources are only built for this goal.
# if test "$PACKAGE" = gettext; then
# USE_NLS=yes
# USE_INCLUDED_LIBINTL=yes
# fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(AM_GLIB_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
# AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
strdup __argz_count __argz_stringify __argz_next])
# if test "${ac_cv_func_stpcpy+set}" != "set"; then
# AC_CHECK_FUNCS(stpcpy)
# fi
# if test "${ac_cv_func_stpcpy}" = "yes"; then
# AC_DEFINE(HAVE_STPCPY)
# fi
AM_LC_MESSAGES
AM_GLIB_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
# dnl The reference to <locale.h> in the installed <libintl.h> file
# dnl must be resolved because we cannot expect the users of this
# dnl to define HAVE_LOCALE_H.
# if test $ac_cv_header_locale_h = yes; then
# INCLUDE_LOCALE_H="#include <locale.h>"
# else
# INCLUDE_LOCALE_H="\
#/* The system does not provide the header <locale.h>. Take care yourself. */"
# fi
# AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
test -d po || mkdir po
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/po/$msgformat-msg.sed > po/po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po/po2tbl.sed.in > po/po2tbl.sed
# dnl In the intl/Makefile.in we have a special dependency which makes
# dnl only sense for gettext. We comment this out for non-gettext
# dnl packages.
# if test "$PACKAGE" = "gettext"; then
# GT_NO="#NO#"
# GT_YES=
# else
# GT_NO=
# GT_YES="#YES#"
# fi
# AC_SUBST(GT_NO)
# AC_SUBST(GT_YES)
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
dnl Try to locate is.
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
if test -z "$MKINSTALLDIRS"; then
MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
fi
AC_SUBST(MKINSTALLDIRS)
# dnl *** For now the libtool support in intl/Makefile is not for real.
# l=
# AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile.
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
])