diff --git a/gio/gdbusconnection.c b/gio/gdbusconnection.c index 8c964d22d..e825756bb 100644 --- a/gio/gdbusconnection.c +++ b/gio/gdbusconnection.c @@ -1021,29 +1021,23 @@ g_dbus_connection_class_init (GDBusConnectionClass *klass) /** * GDBusConnection::closed: - * @connection: The #GDBusConnection emitting the signal. + * @connection: the #GDBusConnection emitting the signal * @remote_peer_vanished: %TRUE if @connection is closed because the - * remote peer closed its end of the connection. - * @error: (allow-none): A #GError with more details about the event or %NULL. + * remote peer closed its end of the connection + * @error: (allow-none): a #GError with more details about the event or %NULL * * Emitted when the connection is closed. * * The cause of this event can be - * - * - * If g_dbus_connection_close() is called. In this case - * @remote_peer_vanished is set to %FALSE and @error is %NULL. - * - * - * If the remote peer closes the connection. In this case - * @remote_peer_vanished is set to %TRUE and @error is set. - * - * - * If the remote peer sends invalid or malformed data. In this - * case @remote_peer_vanished is set to %FALSE and @error - * is set. - * - * + * + * - If g_dbus_connection_close() is called. In this case + * @remote_peer_vanished is set to %FALSE and @error is %NULL. + * + * - If the remote peer closes the connection. In this case + * @remote_peer_vanished is set to %TRUE and @error is set. + * + * - If the remote peer sends invalid or malformed data. In this + * case @remote_peer_vanished is set to %FALSE and @error is set. * * Upon receiving this signal, you should give up your reference to * @connection. You are guaranteed that this signal is emitted only @@ -1133,7 +1127,7 @@ g_dbus_connection_get_stream (GDBusConnection *connection) /** * g_dbus_connection_start_message_processing: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * If @connection was created with * %G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING, this method @@ -1157,11 +1151,11 @@ g_dbus_connection_start_message_processing (GDBusConnection *connection) /** * g_dbus_connection_is_closed: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Gets whether @connection is closed. * - * Returns: %TRUE if the connection is closed, %FALSE otherwise. + * Returns: %TRUE if the connection is closed, %FALSE otherwise * * Since: 2.26 */ @@ -1179,11 +1173,11 @@ g_dbus_connection_is_closed (GDBusConnection *connection) /** * g_dbus_connection_get_capabilities: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Gets the capabilities negotiated with the remote peer * - * Returns: Zero or more flags from the #GDBusCapabilityFlags enumeration. + * Returns: zero or more flags from the #GDBusCapabilityFlags enumeration * * Since: 2.26 */ @@ -1218,26 +1212,25 @@ flush_in_thread_func (GSimpleAsyncResult *res, /** * g_dbus_connection_flush: - * @connection: A #GDBusConnection. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is - * satisfied or %NULL if you don't care about the result. - * @user_data: The data to pass to @callback. + * @connection: a #GDBusConnection + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: (allow-none): a #GAsyncReadyCallback to call when the + * request is satisfied or %NULL if you don't care about the result + * @user_data: The data to pass to @callback * * Asynchronously flushes @connection, that is, writes all queued * outgoing message to the transport and then flushes the transport * (using g_output_stream_flush_async()). This is useful in programs - * that wants to emit a D-Bus signal and then exit - * immediately. Without flushing the connection, there is no guarantee - * that the message has been sent to the networking buffers in the OS - * kernel. + * that wants to emit a D-Bus signal and then exit immediately. Without + * flushing the connection, there is no guaranteed that the message has + * been sent to the networking buffers in the OS kernel. * * This is an asynchronous method. When the operation is finished, * @callback will be invoked in the thread-default main * loop of the thread you are calling this method from. You can * then call g_dbus_connection_flush_finish() to get the result of the - * operation. See g_dbus_connection_flush_sync() for the synchronous + * operation. See g_dbus_connection_flush_sync() for the synchronous * version. * * Since: 2.26 @@ -1266,13 +1259,14 @@ g_dbus_connection_flush (GDBusConnection *connection, /** * g_dbus_connection_flush_finish: - * @connection: A #GDBusConnection. - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_flush(). - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed + * to g_dbus_connection_flush() + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_flush(). * - * Returns: %TRUE if the operation succeeded, %FALSE if @error is set. + * Returns: %TRUE if the operation succeeded, %FALSE if @error is set * * Since: 2.26 */ @@ -1303,16 +1297,16 @@ g_dbus_connection_flush_finish (GDBusConnection *connection, /** * g_dbus_connection_flush_sync: - * @connection: A #GDBusConnection. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously flushes @connection. The calling thread is blocked * until this is done. See g_dbus_connection_flush() for the * asynchronous version of this method and more details about what it * does. * - * Returns: %TRUE if the operation succeeded, %FALSE if @error is set. + * Returns: %TRUE if the operation succeeded, %FALSE if @error is set * * Since: 2.26 */ @@ -1417,11 +1411,11 @@ schedule_closed_unlocked (GDBusConnection *connection, /** * g_dbus_connection_close: - * @connection: A #GDBusConnection. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is - * satisfied or %NULL if you don't care about the result. - * @user_data: The data to pass to @callback. + * @connection: a #GDBusConnection + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: (allow-none): a #GAsyncReadyCallback to call when the request is + * satisfied or %NULL if you don't care about the result + * @user_data: The data to pass to @callback * * Closes @connection. Note that this never causes the process to * exit (this might only happen if the other end of a shared message @@ -1445,7 +1439,7 @@ schedule_closed_unlocked (GDBusConnection *connection, * linkend="g-main-context-push-thread-default">thread-default main * loop of the thread you are calling this method from. You can * then call g_dbus_connection_close_finish() to get the result of the - * operation. See g_dbus_connection_close_sync() for the synchronous + * operation. See g_dbus_connection_close_sync() for the synchronous * version. * * Since: 2.26 @@ -1477,13 +1471,14 @@ g_dbus_connection_close (GDBusConnection *connection, /** * g_dbus_connection_close_finish: - * @connection: A #GDBusConnection. - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_close(). - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed + * to g_dbus_connection_close() + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_close(). * - * Returns: %TRUE if the operation succeeded, %FALSE if @error is set. + * Returns: %TRUE if the operation succeeded, %FALSE if @error is set * * Since: 2.26 */ @@ -1531,23 +1526,23 @@ sync_close_cb (GObject *source_object, /** * g_dbus_connection_close_sync: - * @connection: A #GDBusConnection. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously closees @connection. The calling thread is blocked * until this is done. See g_dbus_connection_close() for the * asynchronous version of this method and more details about what it * does. * - * Returns: %TRUE if the operation succeeded, %FALSE if @error is set. + * Returns: %TRUE if the operation succeeded, %FALSE if @error is set * * Since: 2.26 */ gboolean -g_dbus_connection_close_sync (GDBusConnection *connection, - GCancellable *cancellable, - GError **error) +g_dbus_connection_close_sync (GDBusConnection *connection, + GCancellable *cancellable, + GError **error) { gboolean ret; @@ -1583,7 +1578,7 @@ g_dbus_connection_close_sync (GDBusConnection *connection, /** * g_dbus_connection_get_last_serial: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Retrieves the last serial number assigned to a #GDBusMessage on * the current thread. This includes messages sent via both low-level @@ -1592,7 +1587,7 @@ g_dbus_connection_close_sync (GDBusConnection *connection, * g_dbus_connection_call() or g_dbus_proxy_call(). * * Returns: the last used serial or zero when no message has been sent - * within the current thread. + * within the current thread * * Since: 2.34 */ @@ -1716,12 +1711,12 @@ g_dbus_connection_send_message_unlocked (GDBusConnection *connection, /** * g_dbus_connection_send_message: - * @connection: A #GDBusConnection. - * @message: A #GDBusMessage - * @flags: Flags affecting how the message is sent. - * @out_serial: (out) (allow-none): Return location for serial number assigned - * to @message when sending it or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @message: a #GDBusMessage + * @flags: flags affecting how the message is sent + * @out_serial: (out) (allow-none): return location for serial number assigned + * to @message when sending it or %NULL + * @error: Return location for error or %NULL * * Asynchronously sends @message to the peer represented by @connection. * @@ -1744,16 +1739,16 @@ g_dbus_connection_send_message_unlocked (GDBusConnection *connection, * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag. * * Returns: %TRUE if the message was well-formed and queued for - * transmission, %FALSE if @error is set. + * transmission, %FALSE if @error is set * * Since: 2.26 */ gboolean -g_dbus_connection_send_message (GDBusConnection *connection, - GDBusMessage *message, - GDBusSendMessageFlags flags, - volatile guint32 *out_serial, - GError **error) +g_dbus_connection_send_message (GDBusConnection *connection, + GDBusMessage *message, + GDBusSendMessageFlags flags, + volatile guint32 *out_serial, + GError **error) { gboolean ret; @@ -2029,17 +2024,17 @@ g_dbus_connection_send_message_with_reply_unlocked (GDBusConnection *connect /** * g_dbus_connection_send_message_with_reply: - * @connection: A #GDBusConnection. - * @message: A #GDBusMessage. - * @flags: Flags affecting how the message is sent. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @out_serial: (out) (allow-none): Return location for serial number assigned - * to @message when sending it or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is - * satisfied or %NULL if you don't care about the result. - * @user_data: The data to pass to @callback. + * @connection: a #GDBusConnection + * @message: a #GDBusMessage + * @flags: flags affecting how the message is sent + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @out_serial: (out) (allow-none): return location for serial number assigned + * to @message when sending it or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: (allow-none): a #GAsyncReadyCallback to call when the request + * is satisfied or %NULL if you don't care about the result + * @user_data: The data to pass to @callback * * Asynchronously sends @message to the peer represented by @connection. * @@ -2071,14 +2066,14 @@ g_dbus_connection_send_message_with_reply_unlocked (GDBusConnection *connect * Since: 2.26 */ void -g_dbus_connection_send_message_with_reply (GDBusConnection *connection, - GDBusMessage *message, - GDBusSendMessageFlags flags, - gint timeout_msec, - volatile guint32 *out_serial, - GCancellable *cancellable, - GAsyncReadyCallback callback, - gpointer user_data) +g_dbus_connection_send_message_with_reply (GDBusConnection *connection, + GDBusMessage *message, + GDBusSendMessageFlags flags, + gint timeout_msec, + volatile guint32 *out_serial, + GCancellable *cancellable, + GAsyncReadyCallback callback, + gpointer user_data) { g_return_if_fail (G_IS_DBUS_CONNECTION (connection)); g_return_if_fail (G_IS_DBUS_MESSAGE (message)); @@ -2100,8 +2095,9 @@ g_dbus_connection_send_message_with_reply (GDBusConnection *connection, /** * g_dbus_connection_send_message_with_reply_finish: * @connection: a #GDBusConnection - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_send_message_with_reply(). - * @error: Return location for error or %NULL. + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to + * g_dbus_connection_send_message_with_reply() + * @error: teturn location for error or %NULL * * Finishes an operation started with g_dbus_connection_send_message_with_reply(). * @@ -2114,7 +2110,7 @@ g_dbus_connection_send_message_with_reply (GDBusConnection *connection, * linkend="gdbus-unix-fd-client"/> for an example of how to use this * low-level API to send and receive UNIX file descriptors. * - * Returns: (transfer full): A locked #GDBusMessage or %NULL if @error is set. + * Returns: (transfer full): a locked #GDBusMessage or %NULL if @error is set * * Since: 2.26 */ @@ -2164,15 +2160,15 @@ send_message_with_reply_sync_cb (GDBusConnection *connection, /** * g_dbus_connection_send_message_with_reply_sync: - * @connection: A #GDBusConnection. - * @message: A #GDBusMessage. - * @flags: Flags affecting how the message is sent. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @out_serial: (out) (allow-none): Return location for serial number assigned - * to @message when sending it or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @message: a #GDBusMessage + * @flags: flags affecting how the message is sent. + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @out_serial: (out) (allow-none): return location for serial number + * assigned to @message when sending it or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously sends @message to the peer represented by @connection * and blocks the calling thread until a reply is received or the @@ -2203,18 +2199,19 @@ send_message_with_reply_sync_cb (GDBusConnection *connection, * Note that @message must be unlocked, unless @flags contain the * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag. * - * Returns: (transfer full): A locked #GDBusMessage that is the reply to @message or %NULL if @error is set. + * Returns: (transfer full): a locked #GDBusMessage that is the reply + * to @message or %NULL if @error is set * * Since: 2.26 */ GDBusMessage * -g_dbus_connection_send_message_with_reply_sync (GDBusConnection *connection, - GDBusMessage *message, - GDBusSendMessageFlags flags, - gint timeout_msec, - volatile guint32 *out_serial, - GCancellable *cancellable, - GError **error) +g_dbus_connection_send_message_with_reply_sync (GDBusConnection *connection, + GDBusMessage *message, + GDBusSendMessageFlags flags, + gint timeout_msec, + volatile guint32 *out_serial, + GCancellable *cancellable, + GError **error) { SendMessageSyncData *data; GDBusMessage *reply; @@ -2713,13 +2710,13 @@ async_initable_iface_init (GAsyncInitableIface *async_initable_iface) /** * g_dbus_connection_new: - * @stream: A #GIOStream. - * @guid: (allow-none): The GUID to use if a authenticating as a server or %NULL. - * @flags: Flags describing how to make the connection. - * @observer: (allow-none): A #GDBusAuthObserver or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: A #GAsyncReadyCallback to call when the request is satisfied. - * @user_data: The data to pass to @callback. + * @stream: a #GIOStream + * @guid: (allow-none): the GUID to use if a authenticating as a server or %NULL + * @flags: flags describing how to make the connection + * @observer: (allow-none): a #GDBusAuthObserver or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: a #GAsyncReadyCallback to call when the request is satisfied + * @user_data: the data to pass to @callback * * Asynchronously sets up a D-Bus connection for exchanging D-Bus messages * with the end represented by @stream. @@ -2768,12 +2765,14 @@ g_dbus_connection_new (GIOStream *stream, /** * g_dbus_connection_new_finish: - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_new(). - * @error: Return location for error or %NULL. + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback + * passed to g_dbus_connection_new(). + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_new(). * - * Returns: A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: a #GDBusConnection or %NULL if @error is set. Free + * with g_object_unref(). * * Since: 2.26 */ @@ -2801,12 +2800,12 @@ g_dbus_connection_new_finish (GAsyncResult *res, /** * g_dbus_connection_new_sync: - * @stream: A #GIOStream. - * @guid: (allow-none): The GUID to use if a authenticating as a server or %NULL. - * @flags: Flags describing how to make the connection. - * @observer: (allow-none): A #GDBusAuthObserver or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @stream: a #GIOStream + * @guid: (allow-none): the GUID to use if a authenticating as a server or %NULL + * @flags: flags describing how to make the connection + * @observer: (allow-none): a #GDBusAuthObserver or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously sets up a D-Bus connection for exchanging D-Bus messages * with the end represented by @stream. @@ -2824,7 +2823,7 @@ g_dbus_connection_new_finish (GAsyncResult *res, * This is a synchronous failable constructor. See * g_dbus_connection_new() for the asynchronous version. * - * Returns: A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: a #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). * * Since: 2.26 */ @@ -2852,12 +2851,12 @@ g_dbus_connection_new_sync (GIOStream *stream, /** * g_dbus_connection_new_for_address: - * @address: A D-Bus address. - * @flags: Flags describing how to make the connection. - * @observer: (allow-none): A #GDBusAuthObserver or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: A #GAsyncReadyCallback to call when the request is satisfied. - * @user_data: The data to pass to @callback. + * @address: a D-Bus address + * @flags: flags describing how to make the connection + * @observer: (allow-none): a #GDBusAuthObserver or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: a #GAsyncReadyCallback to call when the request is satisfied + * @user_data: the data to pass to @callback * * Asynchronously connects and sets up a D-Bus client connection for * exchanging D-Bus messages with an endpoint specified by @address @@ -2904,12 +2903,14 @@ g_dbus_connection_new_for_address (const gchar *address, /** * g_dbus_connection_new_for_address_finish: - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_new(). - * @error: Return location for error or %NULL. + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed + * to g_dbus_connection_new() + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_new_for_address(). * - * Returns: A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: a #GDBusConnection or %NULL if @error is set. Free with + * g_object_unref(). * * Since: 2.26 */ @@ -2937,11 +2938,11 @@ g_dbus_connection_new_for_address_finish (GAsyncResult *res, /** * g_dbus_connection_new_for_address_sync: - * @address: A D-Bus address. - * @flags: Flags describing how to make the connection. - * @observer: (allow-none): A #GDBusAuthObserver or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @address: a D-Bus address + * @flags: flags describing how to make the connection + * @observer: (allow-none): a #GDBusAuthObserver or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously connects and sets up a D-Bus client connection for * exchanging D-Bus messages with an endpoint specified by @address @@ -2959,7 +2960,8 @@ g_dbus_connection_new_for_address_finish (GAsyncResult *res, * If @observer is not %NULL it may be used to control the * authentication process. * - * Returns: A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: a #GDBusConnection or %NULL if @error is set. Free with + * g_object_unref(). * * Since: 2.26 */ @@ -2985,9 +2987,9 @@ g_dbus_connection_new_for_address_sync (const gchar *address, /** * g_dbus_connection_set_exit_on_close: - * @connection: A #GDBusConnection. - * @exit_on_close: Whether the process should be terminated - * when @connection is closed by the remote peer. + * @connection: a #GDBusConnection + * @exit_on_close: whether the process should be terminated + * when @connection is closed by the remote peer * * Sets whether the process should be terminated when @connection is * closed by the remote peer. See #GDBusConnection:exit-on-close for @@ -3017,14 +3019,14 @@ g_dbus_connection_set_exit_on_close (GDBusConnection *connection, /** * g_dbus_connection_get_exit_on_close: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Gets whether the process is terminated when @connection is * closed by the remote peer. See * #GDBusConnection:exit-on-close for more details. * - * Returns: Whether the process is terminated when @connection is - * closed by the remote peer. + * Returns: whether the process is terminated when @connection is + * closed by the remote peer * * Since: 2.26 */ @@ -3041,13 +3043,13 @@ g_dbus_connection_get_exit_on_close (GDBusConnection *connection) /** * g_dbus_connection_get_guid: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * The GUID of the peer performing the role of server when * authenticating. See #GDBusConnection:guid for more details. * * Returns: The GUID. Do not free this string, it is owned by - * @connection. + * @connection. * * Since: 2.26 */ @@ -3060,15 +3062,15 @@ g_dbus_connection_get_guid (GDBusConnection *connection) /** * g_dbus_connection_get_unique_name: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Gets the unique name of @connection as assigned by the message * bus. This can also be used to figure out if @connection is a * message bus connection. * - * Returns: The unique name or %NULL if @connection is not a message - * bus connection. Do not free this string, it is owned by - * @connection. + * Returns: the unique name or %NULL if @connection is not a message + * bus connection. Do not free this string, it is owned by + * @connection. * * Since: 2.26 */ @@ -3086,7 +3088,7 @@ g_dbus_connection_get_unique_name (GDBusConnection *connection) /** * g_dbus_connection_get_peer_credentials: - * @connection: A #GDBusConnection. + * @connection: a #GDBusConnection * * Gets the credentials of the authenticated peer. This will always * return %NULL unless @connection acted as a server @@ -3098,8 +3100,8 @@ g_dbus_connection_get_unique_name (GDBusConnection *connection) * each application is a client. So this method will always return * %NULL for message bus clients. * - * Returns: (transfer none): A #GCredentials or %NULL if not available. Do not free - * this object, it is owned by @connection. + * Returns: (transfer none): a #GCredentials or %NULL if not available. + * Do not free this object, it is owned by @connection. * * Since: 2.26 */ @@ -3121,11 +3123,11 @@ static guint _global_filter_id = 1; /** * g_dbus_connection_add_filter: - * @connection: A #GDBusConnection. - * @filter_function: A filter function. - * @user_data: User data to pass to @filter_function. - * @user_data_free_func: Function to free @user_data with when filter - * is removed or %NULL. + * @connection: a #GDBusConnection + * @filter_function: a filter function + * @user_data: user data to pass to @filter_function + * @user_data_free_func: function to free @user_data with when filter + * is removed or %NULL * * Adds a message filter. Filters are handlers that are run on all * incoming and outgoing messages, prior to standard dispatch. Filters @@ -3148,8 +3150,8 @@ static guint _global_filter_id = 1; * message. Similary, if a filter consumes an outgoing message, the * message will not be sent to the other peer. * - * Returns: A filter identifier that can be used with - * g_dbus_connection_remove_filter(). + * Returns: a filter identifier that can be used with + * g_dbus_connection_remove_filter() * * Since: 2.26 */ @@ -3397,24 +3399,26 @@ is_signal_data_for_name_lost_or_acquired (SignalData *signal_data) /** * g_dbus_connection_signal_subscribe: - * @connection: A #GDBusConnection. - * @sender: (allow-none): Sender name to match on (unique or well-known name) - * or %NULL to listen from all senders. + * @connection: a #GDBusConnection + * @sender: (allow-none): sender name to match on (unique or well-known name) + * or %NULL to listen from all senders * @interface_name: (allow-none): D-Bus interface name to match on or %NULL to - * match on all interfaces. - * @member: (allow-none): D-Bus signal name to match on or %NULL to match on all signals. - * @object_path: (allow-none): Object path to match on or %NULL to match on all object paths. - * @arg0: (allow-none): Contents of first string argument to match on or %NULL - * to match on all kinds of arguments. - * @flags: Flags describing how to subscribe to the signal (currently unused). - * @callback: Callback to invoke when there is a signal matching the requested data. - * @user_data: User data to pass to @callback. - * @user_data_free_func: (allow-none): Function to free @user_data with when - * subscription is removed or %NULL. + * match on all interfaces + * @member: (allow-none): D-Bus signal name to match on or %NULL to match on + * all signals + * @object_path: (allow-none): object path to match on or %NULL to match on + * all object paths + * @arg0: (allow-none): contents of first string argument to match on or %NULL + * to match on all kinds of arguments + * @flags: flags describing how to subscribe to the signal (currently unused) + * @callback: callback to invoke when there is a signal matching the requested data + * @user_data: user data to pass to @callback + * @user_data_free_func: (allow-none): function to free @user_data with when + * subscription is removed or %NULL * * Subscribes to signals on @connection and invokes @callback with a - * whenever the signal is received. Note that @callback - * will be invoked in the thread-default main * loop of the thread you are calling this method from. * @@ -3433,7 +3437,7 @@ is_signal_data_for_name_lost_or_acquired (SignalData *signal_data) * interpreted as part of a namespace or path. The first argument * of a signal is matched against that part as specified by D-Bus. * - * Returns: A subscription identifier that can be used with g_dbus_connection_signal_unsubscribe(). + * Returns: a subscription identifier that can be used with g_dbus_connection_signal_unsubscribe() * * Since: 2.26 */ @@ -3633,8 +3637,9 @@ unsubscribe_id_internal (GDBusConnection *connection, /** * g_dbus_connection_signal_unsubscribe: - * @connection: A #GDBusConnection. - * @subscription_id: A subscription id obtained from g_dbus_connection_signal_subscribe(). + * @connection: a #GDBusConnection + * @subscription_id: a subscription id obtained from + * g_dbus_connection_signal_subscribe() * * Unsubscribes from signals. * @@ -5075,13 +5080,13 @@ obj_message_func (GDBusConnection *connection, /** * g_dbus_connection_register_object: - * @connection: A #GDBusConnection. - * @object_path: The object path to register at. - * @interface_info: Introspection data for the interface. - * @vtable: (allow-none): A #GDBusInterfaceVTable to call into or %NULL. - * @user_data: (allow-none): Data to pass to functions in @vtable. - * @user_data_free_func: Function to call when the object path is unregistered. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @object_path: the object path to register at + * @interface_info: introspection data for the interface + * @vtable: (allow-none): a #GDBusInterfaceVTable to call into or %NULL + * @user_data: (allow-none): data to pass to functions in @vtable + * @user_data_free_func: function to call when the object path is unregistered + * @error: return location for error or %NULL * * Registers callbacks for exported objects at @object_path with the * D-Bus interface that is described in @interface_info. @@ -5122,18 +5127,18 @@ obj_message_func (GDBusConnection *connection, * See for an example of how to use this method. * * Returns: 0 if @error is set, otherwise a registration id (never 0) - * that can be used with g_dbus_connection_unregister_object() . + * that can be used with g_dbus_connection_unregister_object() * * Since: 2.26 */ guint -g_dbus_connection_register_object (GDBusConnection *connection, - const gchar *object_path, - GDBusInterfaceInfo *interface_info, - const GDBusInterfaceVTable *vtable, - gpointer user_data, - GDestroyNotify user_data_free_func, - GError **error) +g_dbus_connection_register_object (GDBusConnection *connection, + const gchar *object_path, + GDBusInterfaceInfo *interface_info, + const GDBusInterfaceVTable *vtable, + gpointer user_data, + GDestroyNotify user_data_free_func, + GError **error) { ExportedObject *eo; ExportedInterface *ei; @@ -5203,12 +5208,13 @@ g_dbus_connection_register_object (GDBusConnection *connection, /** * g_dbus_connection_unregister_object: - * @connection: A #GDBusConnection. - * @registration_id: A registration id obtained from g_dbus_connection_register_object(). + * @connection: a #GDBusConnection + * @registration_id: a registration id obtained from + * g_dbus_connection_register_object() * * Unregisters an object. * - * Returns: %TRUE if the object was unregistered, %FALSE otherwise. + * Returns: %TRUE if the object was unregistered, %FALSE otherwise * * Since: 2.26 */ @@ -5253,15 +5259,15 @@ g_dbus_connection_unregister_object (GDBusConnection *connection, /** * g_dbus_connection_emit_signal: - * @connection: A #GDBusConnection. - * @destination_bus_name: (allow-none): The unique bus name for the destination - * for the signal or %NULL to emit to all listeners. - * @object_path: Path of remote object. - * @interface_name: D-Bus interface to emit a signal on. - * @signal_name: The name of the signal to emit. - * @parameters: (allow-none): A #GVariant tuple with parameters for the signal - * or %NULL if not passing parameters. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @destination_bus_name: (allow-none): the unique bus name for the destination + * for the signal or %NULL to emit to all listeners + * @object_path: path of remote object + * @interface_name: D-Bus interface to emit a signal on + * @signal_name: the name of the signal to emit + * @parameters: (allow-none): a #GVariant tuple with parameters for the signal + * or %NULL if not passing parameters + * @error: Return location for error or %NULL * * Emits a signal. * @@ -5269,7 +5275,7 @@ g_dbus_connection_unregister_object (GDBusConnection *connection, * * This can only fail if @parameters is not compatible with the D-Bus protocol. * - * Returns: %TRUE unless @error is set. + * Returns: %TRUE unless @error is set * * Since: 2.26 */ @@ -5754,23 +5760,23 @@ g_dbus_connection_call_sync_internal (GDBusConnection *connection, /** * g_dbus_connection_call: - * @connection: A #GDBusConnection. - * @bus_name: (allow-none): A unique or well-known bus name or %NULL if - * @connection is not a message bus connection. - * @object_path: Path of remote object. - * @interface_name: D-Bus interface to invoke method on. - * @method_name: The name of the method to invoke. - * @parameters: (allow-none): A #GVariant tuple with parameters for the method - * or %NULL if not passing parameters. - * @reply_type: (allow-none): The expected type of the reply, or %NULL. - * @flags: Flags from the #GDBusCallFlags enumeration. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is - * satisfied or %NULL if you don't care about the result of the - * method invocation. - * @user_data: The data to pass to @callback. + * @connection: a #GDBusConnection + * @bus_name: (allow-none): a unique or well-known bus name or %NULL if + * @connection is not a message bus connection + * @object_path: path of remote object + * @interface_name: D-Bus interface to invoke method on + * @method_name: the name of the method to invoke + * @parameters: (allow-none): a #GVariant tuple with parameters for the method + * or %NULL if not passing parameters + * @reply_type: (allow-none): the expected type of the reply, or %NULL + * @flags: flags from the #GDBusCallFlags enumeration + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: (allow-none): a #GAsyncReadyCallback to call when the request + * is satisfied or %NULL if you don't care about the result of the + * method invocation + * @user_data: the data to pass to @callback * * Asynchronously invokes the @method_name method on the * @interface_name D-Bus interface on the remote object at @@ -5818,32 +5824,32 @@ g_dbus_connection_call_sync_internal (GDBusConnection *connection, * Since: 2.26 */ void -g_dbus_connection_call (GDBusConnection *connection, - const gchar *bus_name, - const gchar *object_path, - const gchar *interface_name, - const gchar *method_name, - GVariant *parameters, - const GVariantType *reply_type, - GDBusCallFlags flags, - gint timeout_msec, - GCancellable *cancellable, - GAsyncReadyCallback callback, - gpointer user_data) +g_dbus_connection_call (GDBusConnection *connection, + const gchar *bus_name, + const gchar *object_path, + const gchar *interface_name, + const gchar *method_name, + GVariant *parameters, + const GVariantType *reply_type, + GDBusCallFlags flags, + gint timeout_msec, + GCancellable *cancellable, + GAsyncReadyCallback callback, + gpointer user_data) { g_dbus_connection_call_internal (connection, bus_name, object_path, interface_name, method_name, parameters, reply_type, flags, timeout_msec, NULL, cancellable, callback, user_data); } /** * g_dbus_connection_call_finish: - * @connection: A #GDBusConnection. - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call(). - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call() + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_call(). * * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with - * return values. Free with g_variant_unref(). + * return values. Free with g_variant_unref(). * * Since: 2.26 */ @@ -5857,20 +5863,20 @@ g_dbus_connection_call_finish (GDBusConnection *connection, /** * g_dbus_connection_call_sync: - * @connection: A #GDBusConnection. - * @bus_name: (allow-none): A unique or well-known bus name or %NULL if - * @connection is not a message bus connection. - * @object_path: Path of remote object. - * @interface_name: D-Bus interface to invoke method on. - * @method_name: The name of the method to invoke. - * @parameters: (allow-none): A #GVariant tuple with parameters for the method - * or %NULL if not passing parameters. - * @reply_type: (allow-none): The expected type of the reply, or %NULL. - * @flags: Flags from the #GDBusCallFlags enumeration. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @bus_name: (allow-none): a unique or well-known bus name or %NULL if + * @connection is not a message bus connection + * @object_path: path of remote object + * @interface_name: D-Bus interface to invoke method on + * @method_name: the name of the method to invoke + * @parameters: (allow-none): a #GVariant tuple with parameters for the method + * or %NULL if not passing parameters + * @reply_type: (allow-none): the expected type of the reply, or %NULL + * @flags: flags from the #GDBusCallFlags enumeration + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously invokes the @method_name method on the * @interface_name D-Bus interface on the remote object at @@ -5910,22 +5916,22 @@ g_dbus_connection_call_finish (GDBusConnection *connection, * this method. * * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with - * return values. Free with g_variant_unref(). + * return values. Free with g_variant_unref(). * * Since: 2.26 */ GVariant * -g_dbus_connection_call_sync (GDBusConnection *connection, - const gchar *bus_name, - const gchar *object_path, - const gchar *interface_name, - const gchar *method_name, - GVariant *parameters, - const GVariantType *reply_type, - GDBusCallFlags flags, - gint timeout_msec, - GCancellable *cancellable, - GError **error) +g_dbus_connection_call_sync (GDBusConnection *connection, + const gchar *bus_name, + const gchar *object_path, + const gchar *interface_name, + const gchar *method_name, + GVariant *parameters, + const GVariantType *reply_type, + GDBusCallFlags flags, + gint timeout_msec, + GCancellable *cancellable, + GError **error) { return g_dbus_connection_call_sync_internal (connection, bus_name, object_path, interface_name, method_name, parameters, reply_type, flags, timeout_msec, NULL, NULL, cancellable, error); } @@ -5936,23 +5942,23 @@ g_dbus_connection_call_sync (GDBusConnection *connection, /** * g_dbus_connection_call_with_unix_fd_list: - * @connection: A #GDBusConnection. - * @bus_name: (allow-none): A unique or well-known bus name or %NULL if - * @connection is not a message bus connection. - * @object_path: Path of remote object. - * @interface_name: D-Bus interface to invoke method on. - * @method_name: The name of the method to invoke. - * @parameters: (allow-none): A #GVariant tuple with parameters for the method - * or %NULL if not passing parameters. - * @reply_type: (allow-none): The expected type of the reply, or %NULL. - * @flags: Flags from the #GDBusCallFlags enumeration. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @fd_list: (allow-none): A #GUnixFDList or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is - * satisfied or %NULL if you don't * care about the result of the - * method invocation. + * @connection: a #GDBusConnection + * @bus_name: (allow-none): a unique or well-known bus name or %NULL if + * @connection is not a message bus connection + * @object_path: path of remote object + * @interface_name: D-Bus interface to invoke method on + * @method_name: the name of the method to invoke + * @parameters: (allow-none): a #GVariant tuple with parameters for the method + * or %NULL if not passing parameters + * @reply_type: (allow-none): the expected type of the reply, or %NULL + * @flags: flags from the #GDBusCallFlags enumeration + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @fd_list: (allow-none): a #GUnixFDList or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: (allow-none): a #GAsyncReadyCallback to call when the request is + * satisfied or %NULL if you don't * care about the result of the + * method invocation * @user_data: The data to pass to @callback. * * Like g_dbus_connection_call() but also takes a #GUnixFDList object. @@ -5962,34 +5968,35 @@ g_dbus_connection_call_sync (GDBusConnection *connection, * Since: 2.30 */ void -g_dbus_connection_call_with_unix_fd_list (GDBusConnection *connection, - const gchar *bus_name, - const gchar *object_path, - const gchar *interface_name, - const gchar *method_name, - GVariant *parameters, - const GVariantType *reply_type, - GDBusCallFlags flags, - gint timeout_msec, - GUnixFDList *fd_list, - GCancellable *cancellable, - GAsyncReadyCallback callback, - gpointer user_data) +g_dbus_connection_call_with_unix_fd_list (GDBusConnection *connection, + const gchar *bus_name, + const gchar *object_path, + const gchar *interface_name, + const gchar *method_name, + GVariant *parameters, + const GVariantType *reply_type, + GDBusCallFlags flags, + gint timeout_msec, + GUnixFDList *fd_list, + GCancellable *cancellable, + GAsyncReadyCallback callback, + gpointer user_data) { g_dbus_connection_call_internal (connection, bus_name, object_path, interface_name, method_name, parameters, reply_type, flags, timeout_msec, fd_list, cancellable, callback, user_data); } /** * g_dbus_connection_call_with_unix_fd_list_finish: - * @connection: A #GDBusConnection. - * @out_fd_list: (out) (allow-none): Return location for a #GUnixFDList or %NULL. - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call_with_unix_fd_list(). - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @out_fd_list: (out) (allow-none): return location for a #GUnixFDList or %NULL + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to + * g_dbus_connection_call_with_unix_fd_list() + * @error: return location for error or %NULL * * Finishes an operation started with g_dbus_connection_call_with_unix_fd_list(). * * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with - * return values. Free with g_variant_unref(). + * return values. Free with g_variant_unref(). * * Since: 2.30 */ @@ -6004,46 +6011,46 @@ g_dbus_connection_call_with_unix_fd_list_finish (GDBusConnection *connection, /** * g_dbus_connection_call_with_unix_fd_list_sync: - * @connection: A #GDBusConnection. - * @bus_name: (allow-none): A unique or well-known bus name or %NULL if - * @connection is not a message bus connection. - * @object_path: Path of remote object. - * @interface_name: D-Bus interface to invoke method on. - * @method_name: The name of the method to invoke. - * @parameters: (allow-none): A #GVariant tuple with parameters for the method - * or %NULL if not passing parameters. - * @reply_type: (allow-none): The expected type of the reply, or %NULL. - * @flags: Flags from the #GDBusCallFlags enumeration. - * @timeout_msec: The timeout in milliseconds, -1 to use the default - * timeout or %G_MAXINT for no timeout. - * @fd_list: (allow-none): A #GUnixFDList or %NULL. - * @out_fd_list: (out) (allow-none): Return location for a #GUnixFDList or %NULL. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @bus_name: (allow-none): a unique or well-known bus name or %NULL + * if @connection is not a message bus connection + * @object_path: path of remote object + * @interface_name: D-Bus interface to invoke method on + * @method_name: the name of the method to invoke + * @parameters: (allow-none): a #GVariant tuple with parameters for + * the method or %NULL if not passing parameters + * @reply_type: (allow-none): the expected type of the reply, or %NULL + * @flags: flags from the #GDBusCallFlags enumeration + * @timeout_msec: the timeout in milliseconds, -1 to use the default + * timeout or %G_MAXINT for no timeout + * @fd_list: (allow-none): a #GUnixFDList or %NULL + * @out_fd_list: (out) (allow-none): return location for a #GUnixFDList or %NULL + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Like g_dbus_connection_call_sync() but also takes and returns #GUnixFDList objects. * * This method is only available on UNIX. * * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with - * return values. Free with g_variant_unref(). + * return values. Free with g_variant_unref(). * * Since: 2.30 */ GVariant * -g_dbus_connection_call_with_unix_fd_list_sync (GDBusConnection *connection, - const gchar *bus_name, - const gchar *object_path, - const gchar *interface_name, - const gchar *method_name, - GVariant *parameters, - const GVariantType *reply_type, - GDBusCallFlags flags, - gint timeout_msec, - GUnixFDList *fd_list, - GUnixFDList **out_fd_list, - GCancellable *cancellable, - GError **error) +g_dbus_connection_call_with_unix_fd_list_sync (GDBusConnection *connection, + const gchar *bus_name, + const gchar *object_path, + const gchar *interface_name, + const gchar *method_name, + GVariant *parameters, + const GVariantType *reply_type, + GDBusCallFlags flags, + gint timeout_msec, + GUnixFDList *fd_list, + GUnixFDList **out_fd_list, + GCancellable *cancellable, + GError **error) { return g_dbus_connection_call_sync_internal (connection, bus_name, object_path, interface_name, method_name, parameters, reply_type, flags, timeout_msec, fd_list, out_fd_list, cancellable, error); } @@ -6491,13 +6498,14 @@ subtree_message_func (GDBusConnection *connection, /** * g_dbus_connection_register_subtree: - * @connection: A #GDBusConnection. - * @object_path: The object path to register the subtree at. - * @vtable: A #GDBusSubtreeVTable to enumerate, introspect and dispatch nodes in the subtree. - * @flags: Flags used to fine tune the behavior of the subtree. - * @user_data: Data to pass to functions in @vtable. - * @user_data_free_func: Function to call when the subtree is unregistered. - * @error: Return location for error or %NULL. + * @connection: a #GDBusConnection + * @object_path: the object path to register the subtree at + * @vtable: a #GDBusSubtreeVTable to enumerate, introspect and + * dispatch nodes in the subtree + * @flags: flags used to fine tune the behavior of the subtree + * @user_data: data to pass to functions in @vtable + * @user_data_free_func: function to call when the subtree is unregistered + * @error: return location for error or %NULL * * Registers a whole subtree of dynamic objects. * @@ -6600,12 +6608,13 @@ g_dbus_connection_register_subtree (GDBusConnection *connection, /** * g_dbus_connection_unregister_subtree: - * @connection: A #GDBusConnection. - * @registration_id: A subtree registration id obtained from g_dbus_connection_register_subtree(). + * @connection: a #GDBusConnection + * @registration_id: a subtree registration id obtained from + * g_dbus_connection_register_subtree() * * Unregisters a subtree. * - * Returns: %TRUE if the subtree was unregistered, %FALSE otherwise. + * Returns: %TRUE if the subtree was unregistered, %FALSE otherwise * * Since: 2.26 */ @@ -6981,9 +6990,9 @@ _g_bus_get_singleton_if_exists (GBusType bus_type) /** * g_bus_get_sync: - * @bus_type: A #GBusType. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @error: Return location for error or %NULL. + * @bus_type: a #GBusType + * @cancellable: (allow-none): a #GCancellable or %NULL + * @error: return location for error or %NULL * * Synchronously connects to the message bus specified by @bus_type. * Note that the returned object may shared with other callers, @@ -7002,7 +7011,8 @@ _g_bus_get_singleton_if_exists (GBusType bus_type) * Note that the returned #GDBusConnection object will (usually) have * the #GDBusConnection:exit-on-close property set to %TRUE. * - * Returns: (transfer full): A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: (transfer full): a #GDBusConnection or %NULL if @error is set. + * Free with g_object_unref(). * * Since: 2.26 */ @@ -7058,10 +7068,10 @@ bus_get_async_initable_cb (GObject *source_object, /** * g_bus_get: - * @bus_type: A #GBusType. - * @cancellable: (allow-none): A #GCancellable or %NULL. - * @callback: A #GAsyncReadyCallback to call when the request is satisfied. - * @user_data: The data to pass to @callback. + * @bus_type: a #GBusType + * @cancellable: (allow-none): a #GCancellable or %NULL + * @callback: a #GAsyncReadyCallback to call when the request is satisfied + * @user_data: the data to pass to @callback * * Asynchronously connects to the message bus specified by @bus_type. * @@ -7110,8 +7120,9 @@ g_bus_get (GBusType bus_type, /** * g_bus_get_finish: - * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_bus_get(). - * @error: Return location for error or %NULL. + * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed + * to g_bus_get() + * @error: return location for error or %NULL * * Finishes an operation started with g_bus_get(). * @@ -7124,7 +7135,8 @@ g_bus_get (GBusType bus_type, * Note that the returned #GDBusConnection object will (usually) have * the #GDBusConnection:exit-on-close property set to %TRUE. * - * Returns: (transfer full): A #GDBusConnection or %NULL if @error is set. Free with g_object_unref(). + * Returns: (transfer full): a #GDBusConnection or %NULL if @error is set. + * Free with g_object_unref(). * * Since: 2.26 */