Test for sched_yield as the native yield function first. Corrected typo

2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>

	* configure.in: Test for sched_yield as the native yield function
	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
	message for the pthread_create test. Negative Priorities are
	allowed (and used on Solaris), so consider
	sched_get_priority_min failed only if it returns -1, not <0. Check
	for sched_get_priority_min also in -lrt, if not found in -lpthread
	alone and add -lrt to G_THREAD_LIBS then. Remove special case
	handling of priorities for older solaris versions and posix
	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
	some of those changes.

	* config.guess, config.sub, ltconfig, ltmain.sh:
	Upgrade to libtool 1.3.4.

ChangeLog

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-0

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-10

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-12

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-2

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-4

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-6

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

ChangeLog.pre-2-8

@@ -1,3 +1,19 @@
+2000-03-22  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* configure.in: Test for sched_yield as the native yield function
+	first. Corrected typo g_thread_sleep -> g_usleep. Corrected
+	message for the pthread_create test. Negative Priorities are
+	allowed (and used on Solaris), so consider
+	sched_get_priority_min failed only if it returns -1, not <0. Check
+	for sched_get_priority_min also in -lrt, if not found in -lpthread
+	alone and add -lrt to G_THREAD_LIBS then. Remove special case
+	handling of priorities for older solaris versions and posix
+	threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
+	some of those changes.
+	
+	* config.guess, config.sub, ltconfig, ltmain.sh:
+	Upgrade to libtool 1.3.4.
+
 2000-03-21  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
 
 	* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,

config.guess

@@ -24,7 +24,7 @@
 
 # Written by Per Bothner <bothner@cygnus.com>.
 # The master version of this file is at the FSF in /home/gd/gnu/lib.
-# Please send patches to the Autoconf mailing list <autoconf@gnu.org>.
+# Please send patches to <autoconf-patches@gnu.org>.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
@@ -156,6 +156,9 @@ EOF
     wgrisc:OpenBSD:*:*)
 	echo mipsel-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit 0;;
@@ -328,15 +331,18 @@ EOF
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
-	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+	then
-	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
 		echo m88k-dg-dgux${UNAME_RELEASE}
-	else
+	    else
 		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
-        else echo i586-dg-dgux${UNAME_RELEASE}
-        fi
  	exit 0 ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
@@ -453,7 +459,7 @@ EOF
                   exit (0);
               }
 EOF
-	($CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
 	rm -f $dummy.c $dummy
 	esac
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
@@ -550,7 +556,7 @@ EOF
 	echo t90-cray-unicos${UNAME_RELEASE}
 	exit 0 ;;
     CRAY*T3E:*:*:*)
-	echo t3e-cray-unicosmk${UNAME_RELEASE}
+	echo alpha-cray-unicosmk${UNAME_RELEASE}
 	exit 0 ;;
     CRAY-2:*:*:*)
 	echo cray2-cray-unicos
@@ -588,7 +594,7 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
     *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
 	exit 0 ;;
     *:OpenBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
@@ -618,12 +624,6 @@ EOF
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit 0 ;;
     *:Linux:*:*)
-	# uname on the ARM produces all sorts of strangeness, and we need to
-	# filter it out.
-	case "$UNAME_MACHINE" in
-	  armv*)		      UNAME_MACHINE=$UNAME_MACHINE ;;
-	  arm* | sa110*)	      UNAME_MACHINE="arm" ;;
-	esac
 
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -636,11 +636,38 @@ EOF
 				    s/ .*//
 				    p'`
         case "$ld_supported_emulations" in
-	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
+	  *ia64)
-	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
+		echo "${UNAME_MACHINE}-unknown-linux"
-	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+		exit 0
-	  armlinux)   echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+		;;
-	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	  sparclinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  armlinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32arm*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  armelf_linux*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  m68klinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
 	  elf32ppc)
 		# Determine Lib Version
 		cat >$dummy.c <<EOF
@@ -670,7 +697,9 @@ EOF
 			fi
 		fi	
 		rm -f $dummy.c $dummy
-		echo powerpc-unknown-linux-gnu${LIBC} ; exit 0 ;;
+		echo powerpc-unknown-linux-gnu${LIBC}
+		exit 0
+		;;
 	esac
 
 	if test "${UNAME_MACHINE}" = "alpha" ; then
@@ -797,19 +826,21 @@ EOF
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit 0 ;;
     i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
 	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
 	exit 0 ;;
     i?86:*:5:7*)
-	UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+        # Fixed at (any) Pentium or better
-	(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+        UNAME_MACHINE=i586
-	(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) && UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-	(/bin/uname -X|egrep '^Machine.*Pent.*II' >/dev/null) && UNAME_MACHINE=i686
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-	(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) && UNAME_MACHINE=i585
+	else
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}${UNAME_VERSION}-sysv${UNAME_RELEASE}
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
 	exit 0 ;;
     i?86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
@@ -943,6 +974,9 @@ EOF
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
 	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-qnx-qnx${UNAME_VERSION}
+	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2

config.sub

@@ -105,7 +105,7 @@ case $os in
 	-scout)
 		;;
 	-wrs)
-		os=vxworks
+		os=-vxworks
 		basic_machine=$1
 		;;
 	-hiux*)
@@ -156,13 +156,17 @@ case $os in
 	-psos*)
 		os=-psos
 		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
 esac
 
 # Decode aliases for certain CPU-COMPANY combinations.
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
 		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
 		| 580 | i960 | h8300 \
 		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
@@ -171,12 +175,12 @@ case $basic_machine in
 		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
 		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
 		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-		| mips64vr5000 | miprs64vr5000el \
+		| mips64vr5000 | miprs64vr5000el | mcore \
 		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
-		| thumb | d10v)
+		| thumb | d10v | fr30)
 		basic_machine=$basic_machine-unknown
 		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65)
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
 		;;
 
 	# We use `pc' rather than `unknown'
@@ -191,7 +195,8 @@ case $basic_machine in
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
 	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
 	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
 	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
@@ -204,10 +209,10 @@ case $basic_machine in
 	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
 	      | mips64el-* | mips64orion-* | mips64orionel-* \
 	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-	      | mipstx39-* | mipstx39el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
 	      | f301-* | armv*-* | t3e-* \
 	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* )
+	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -425,7 +430,6 @@ case $basic_machine in
 		;;
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
-		os=-mvs
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i[34567]86v32)
@@ -460,6 +464,9 @@ case $basic_machine in
 		basic_machine=i386-unknown
 		os=-mingw32
 		;;
+	i386-qnx | qnx)
+		basic_machine=i386-qnx
+		;;
 	iris | iris4d)
 		basic_machine=mips-sgi
 		case $os in
@@ -488,7 +495,7 @@ case $basic_machine in
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
-	*mint | *MiNT)
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
 		basic_machine=m68k-atari
 		os=-mint
 		;;
@@ -514,6 +521,10 @@ case $basic_machine in
 		basic_machine=i386-unknown
 		os=-msdos
 		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -523,7 +534,7 @@ case $basic_machine in
 		os=-netbsd
 		;;
 	netwinder)
-		basic_machine=armv4l-corel
+		basic_machine=armv4l-rebel
 		os=-linux
 		;;
 	news | news700 | news800 | news900)
@@ -907,7 +918,7 @@ case $os in
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -openstep* | -oskit*)
+	      | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
@@ -926,6 +937,9 @@ case $os in
 	-sunos6*)
 		os=`echo $os | sed -e 's|sunos6|solaris3|'`
 		;;
+	-opened*)
+		os=-openedition
+		;;
 	-osfrose*)
 		os=-osfrose
 		;;
@@ -963,6 +977,9 @@ case $os in
 	-oss*)
 		os=-sysv3
 		;;
+        -qnx)
+		os=-qnx4
+		;;
 	-svr4)
 		os=-sysv4
 		;;
@@ -1012,7 +1029,7 @@ case $basic_machine in
 	*-acorn)
 		os=-riscix1.2
 		;;
-	arm*-corel)
+	arm*-rebel)
 		os=-linux
 		;;
 	arm*-semi)
@@ -1186,7 +1203,7 @@ case $basic_machine in
 			-genix*)
 				vendor=ns
 				;;
-			-mvs*)
+			-mvs* | -opened*)
 				vendor=ibm
 				;;
 			-ptx*)

configure.in

@@ -750,7 +750,7 @@ case $have_threads in
 			
 			LIBS="$glib_save_LIBS $add_thread_lib"
 			
-			AC_MSG_CHECKING(for pthread_join$IN)
+			AC_MSG_CHECKING(for pthread_create$IN)
 			AC_TRY_RUN([#include <pthread.h> 
 				void* func(void* data) {}
                                 main()
@@ -807,7 +807,6 @@ case $host in
     ;;
 esac
 
-
 AC_MSG_CHECKING(thread related libraries)
 AC_MSG_RESULT($G_THREAD_LIBS)
 
@@ -909,14 +908,25 @@ if test x"$enable_threads" = xyes; then
 			AC_DEFINE(HAVE_PTHREAD_ATTR_SETSTACKSIZE)],
 			[AC_MSG_RESULT(no)])
 		# If sched_get_priority_min(SCHED_OTHER) returns something 
-		# negative, we ignore it. This happens on Solaris.
+		# negative, we ignore it.
 		AC_MSG_CHECKING(for minimal/maximal thread priority)
 		AC_TRY_RUN([#include <pthread.h>
 		     int main () 
-		     { return sched_get_priority_min(SCHED_OTHER) < 0;}],
+		     { return sched_get_priority_min(SCHED_OTHER) == -1;}],
 		     [posix_priority_min="sched_get_priority_min(SCHED_OTHER)"
 		     posix_priority_max="sched_get_priority_max(SCHED_OTHER)"],
 		     [posix_priority_min=none])
+		# On some platforms we need to link to -lrt to use the 
+		# sched_* functions
+		LIBS="$LIBS -lrt"
+		AC_TRY_RUN([#include <pthread.h>
+		     int main () 
+		     { return sched_get_priority_min(SCHED_OTHER) == -1;}],
+		     [posix_priority_min="sched_get_priority_min(SCHED_OTHER)"
+		     posix_priority_max="sched_get_priority_max(SCHED_OTHER)"
+		     G_THREAD_LIBS="$G_THREAD_LIBS -lrt"],
+		     [posix_priority_min=none])
+		LIBS="$glib_save_LIBS $G_THREAD_LIBS"
 		if test x"$posix_priority_min" = xnone; then
 			AC_EGREP_CPP(PX_PRIO_MIN,[#include <pthread.h>
 				PX_PRIO_MIN],,[
@@ -929,14 +939,6 @@ if test x"$enable_threads" = xyes; then
 				posix_priority_min=PRI_OTHER_MIN	
 				posix_priority_max=PRI_OTHER_MAX])
 		fi
-		if test x"$posix_priority_min" = xnone; then
-			case $host in
-        	        	*-*-solaris*)
-                		posix_priority_min=1
-				posix_priority_max=127
-				;;
-			esac
-		fi
 		if test x"$posix_priority_min" = xnone; then
 			AC_MSG_RESULT(none found)
 			AC_MSG_WARN($POSIX_NO_PRIORITIES)
@@ -949,7 +951,7 @@ if test x"$enable_threads" = xyes; then
 		fi
 		posix_yield_func=none
 		AC_MSG_CHECKING(for posix yield function)
-		for yield_func in pthread_yield_np pthread_yield sched_yield \
+		for yield_func in sched_yield pthread_yield_np pthread_yield \
 							thr_yield; do
 			AC_TRY_LINK([#include <pthread.h>],
 				[$yield_func()],
@@ -959,7 +961,7 @@ if test x"$enable_threads" = xyes; then
 		if test x"$posix_yield_func" = xnone; then
 			AC_MSG_RESULT(none found)
 			AC_MSG_WARN($POSIX_NO_YIELD)
-	                posix_yield_func="g_thread_sleep(1000)"
+	                posix_yield_func="g_usleep(1000)"
 		else
 			AC_MSG_RESULT($posix_yield_func)
 			posix_yield_func="$posix_yield_func()"

ltconfig

@@ -53,7 +53,7 @@ fi
 
 # Find the correct PATH separator.  Usually this is `:', but
 # DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != "Xset"; then
+if test "X${PATH_SEPARATOR+set}" != Xset; then
   UNAME=${UNAME-`uname 2>/dev/null`}
   case X$UNAME in
     *-DOS) PATH_SEPARATOR=';' ;;
@@ -63,9 +63,9 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
 
-if test "X${echo_test_string+set}" != "Xset"; then
+if test "X${echo_test_string+set}" != Xset; then
   # find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
@@ -169,10 +169,10 @@ progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
 # Constants:
 PROGRAM=ltconfig
 PACKAGE=libtool
-VERSION=1.3.3
+VERSION=1.3.4
-TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 rm="rm -f"
 
 help="Try \`$progname --help' for more information."
@@ -369,8 +369,8 @@ exec 5>>./config.log
 # Only set LANG and LC_ALL to C if already set.
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
 
 if test -n "$cache_file" && test -r "$cache_file"; then
   echo "loading cache $cache_file within ltconfig"
@@ -462,7 +462,7 @@ aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "${COLLECT_NAMES+set}" != set; then
+  if test "X${COLLECT_NAMES+set}" != Xset; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -663,7 +663,7 @@ if test "$with_gcc" = yes; then
   link_static_flag='-static'
 
   case "$host_os" in
-  beos* | irix5* | irix6* | osf3* | osf4*)
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
     # PIC is the default for these OSes.
     ;;
   aix*)
@@ -718,7 +718,7 @@ else
     # We can build DLLs from non-PIC.
     ;;
 
-  osf3* | osf4*)
+  osf3* | osf4* | osf5*)
     # All OSF/1 code is PIC.
     wl='-Wl,'
     link_static_flag='-non_shared'
@@ -1187,7 +1187,7 @@ EOF
     ;;
 
   netbsd*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
       archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
       archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
     else
@@ -1196,7 +1196,7 @@ EOF
     fi
     ;;
 
-  solaris*)
+  solaris* | sysv5*)
     if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
       ld_shlibs=no
       cat <<EOF 1>&2
@@ -1244,7 +1244,12 @@ EOF
       whole_archive_flag_spec=
       ;;
     *)
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+        whole_archive_flag_spec=
+      fi
       ;;
     esac
   fi
@@ -1405,7 +1410,7 @@ else
     old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
     ;;
 
-  osf3* | osf4*)
+  osf3*)
     if test "$with_gcc" = yes; then
       allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
       archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
@@ -1417,6 +1422,18 @@ else
     hardcode_libdir_separator=:
     ;;
 
+  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
   sco3.2v5*)
     archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
     hardcode_shlibpath_var=no
@@ -1461,6 +1478,18 @@ else
     export_dynamic_flag_spec='-Bexport'
     ;;
 
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
   uts4*)
     archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
     hardcode_libdir_flag_spec='-L$libdir'
@@ -1474,16 +1503,30 @@ else
     ;;
 
   sysv4*MP*)
-    if test -d /usr/nec ;then
+    if test -d /usr/nec; then
-    # archive_cmds='$LD -G -z text -h $soname -o $lib$libobjs$deplibs'
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    archive_cmds='$LD -G -h $soname -o $lib$libobjs$deplibs'
+      hardcode_shlibpath_var=no
-    hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
-    runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
-    hardcode_runpath_var=yes
+      ld_shlibs=yes
-    ld_shlibs=yes
     fi
     ;;
 
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
   *)
     ld_shlibs=no
     ;;
@@ -1589,11 +1632,11 @@ void nm_test_func(){}
 main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
 
-  echo "$progname:1592: checking if global_symbol_pipe works" >&5
+  echo "$progname:1635: checking if global_symbol_pipe works" >&5
-  if { (eval echo $progname:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+  if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { echo "$progname:1596: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+    if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
 
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
@@ -1645,7 +1688,7 @@ EOF
 	  save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$objext"
 	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo $progname:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	  if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
 	    pipe_works=yes
 	  else
 	    echo "$progname: failed program was:" >&5
@@ -1787,8 +1830,9 @@ beos*)
 
 bsdi4*)
   version_type=linux
-  library_names_spec='${libname}.so$major ${libname}.so'
+  need_version=no
-  soname_spec='${libname}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
@@ -1796,6 +1840,7 @@ bsdi4*)
   file_magic_test_file=/shlib/libc.so
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
   # the default ld.so.conf also contains /usr/contrib/lib and
   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
   # libtool to hard-code these into programs
@@ -1841,10 +1886,9 @@ freebsd*)
       need_version=yes
       ;;
   esac
-  finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   case "$host_os" in
-  freebsd2* | freebsd3.[01]*)
+  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     ;;
   *) # from 3.2 on
@@ -1896,8 +1940,6 @@ irix5* | irix6*)
     *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
     *) libsuff= shlibsuff= libmagic=never-match;;
     esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
     ;;
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
@@ -1972,7 +2014,7 @@ os2*)
   shlibpath_var=LIBPATH
   ;;
 
-osf3* | osf4*)
+osf3* | osf4* | osf5*)
   version_type=osf
   need_version=no
   soname_spec='${libname}${release}.so'
@@ -2167,7 +2209,7 @@ else
 if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
   lt_cv_dlopen=no lt_cv_dlopen_libs=
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2170: checking for dlopen in -ldl" >&5
+echo "$progname:2212: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2175,17 +2217,20 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2178 "ltconfig"
+#line 2220 "ltconfig"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 char dlopen();
 
 int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo $progname:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2204,18 +2249,21 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:2207: checking for dlopen" >&5
+echo "$progname:2252: checking for dlopen" >&5
 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2212 "ltconfig"
+#line 2257 "ltconfig"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dlopen(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 char dlopen();
 
 int main() {
@@ -2231,7 +2279,7 @@ dlopen();
 
 ; return 0; }
 EOF
-if { (eval echo $progname:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dlopen=yes"
 else
@@ -2248,7 +2296,7 @@ if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2251: checking for dld_link in -ldld" >&5
+echo "$progname:2299: checking for dld_link in -ldld" >&5
 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2256,17 +2304,20 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2259 "ltconfig"
+#line 2307 "ltconfig"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 char dld_link();
 
 int main() {
 dld_link()
 ; return 0; }
 EOF
-if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2285,18 +2336,21 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2288: checking for shl_load" >&5
+echo "$progname:2339: checking for shl_load" >&5
 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2293 "ltconfig"
+#line 2344 "ltconfig"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char shl_load(); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 char shl_load();
 
 int main() {
@@ -2312,7 +2366,7 @@ shl_load();
 
 ; return 0; }
 EOF
-if { (eval echo $progname:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_shl_load=yes"
 else
@@ -2330,7 +2384,7 @@ if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "$progname:2333: checking for shl_load in -ldld" >&5
+echo "$progname:2387: checking for shl_load in -ldld" >&5
 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2338,18 +2392,21 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2341 "ltconfig"
+#line 2395 "ltconfig"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 char shl_load();
 
 int main() {
 shl_load()
 ; return 0; }
 EOF
-if { (eval echo $progname:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2392,17 +2449,17 @@ fi
 for ac_hdr in dlfcn.h; do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2395: checking for $ac_hdr" >&5
+echo "$progname:2452: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2400 "ltconfig"
+#line 2457 "ltconfig"
 #include <$ac_hdr>
 int fnord = 0;
 EOF
-ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_try="$ac_compile >/dev/null 2>conftest.out"
-{ (eval echo $progname:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2430,7 +2487,7 @@ done
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
   echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2433: checking whether a program can dlopen itself" >&5
+echo "$progname:2490: checking whether a program can dlopen itself" >&5
 if test "${lt_cv_dlopen_self+set}" = set; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2438,7 +2495,7 @@ else
     lt_cv_dlopen_self=cross
   else
     cat > conftest.c <<EOF
-#line 2441 "ltconfig"
+#line 2498 "ltconfig"
 
 #if HAVE_DLFCN_H
 #include <dlfcn.h>
@@ -2484,7 +2541,7 @@ main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
 	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
 
 EOF
-if { (eval echo $progname:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   lt_cv_dlopen_self=yes
 else
@@ -2503,7 +2560,7 @@ echo "$ac_t""$lt_cv_dlopen_self" 1>&6
   if test "$lt_cv_dlopen_self" = yes; then
     LDFLAGS="$LDFLAGS $link_static_flag"
   echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2506: checking whether a statically linked program can dlopen itself" >&5
+echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5
 if test "${lt_cv_dlopen_self_static+set}" = set; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2511,7 +2568,7 @@ else
     lt_cv_dlopen_self_static=cross
   else
     cat > conftest.c <<EOF
-#line 2514 "ltconfig"
+#line 2571 "ltconfig"
 
 #if HAVE_DLFCN_H
 #include <dlfcn.h>
@@ -2557,7 +2614,7 @@ main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
     if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
 
 EOF
-if { (eval echo $progname:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   lt_cv_dlopen_self_static=yes
 else
@@ -2649,7 +2706,7 @@ case "$ltmain" in
 # NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
 #
 # Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -2675,7 +2732,7 @@ Xsed="sed -e s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
 
 ### BEGIN LIBTOOL CONFIG
 EOF
@@ -2938,7 +2995,7 @@ case "$ltmain" in
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "${COLLECT_NAMES+set}" != set; then
+if test "X${COLLECT_NAMES+set}" != Xset; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -2948,6 +3005,10 @@ EOF
 
   # Append the ltmain.sh script.
   sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
 
   chmod +x "$ofile"
   ;;

ltmain.sh

@@ -54,8 +54,8 @@ modename="$progname"
 # Constants.
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.3.3
+VERSION=1.3.4
-TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
 
 default_mode=
 help="Try \`$progname --help' for more information."
@@ -435,7 +435,7 @@ compiler."
       fbsd_hideous_sh_bug=$base_compile
 
       # All platforms use -DPIC, to notify preprocessed assembler code.
-      command="$base_compile $pic_flag -DPIC $srcfile"
+      command="$base_compile $srcfile $pic_flag -DPIC"
       if test "$build_old_libs" = yes; then
 	lo_libobj="$libobj"
 	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
@@ -521,9 +521,17 @@ compiler."
 	  exit $error
 	fi
 
+	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$obj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
 	# Now arrange that obj and lo_libobj become the same file
-	$show "$LN_S $obj $lo_libobj"
+	$show "(cd $xdir && $LN_S $baseobj $libobj)"
-	if $run $LN_S $obj $lo_libobj; then
+	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
 	  exit 0
 	else
 	  error=$?
@@ -613,8 +621,6 @@ compiler."
   # libtool link mode
   link)
     modename="$modename: link"
-    C_compiler="$CC" # save it, to compile generated C sources
-    CC="$nonopt"
     case "$host" in
     *-*-cygwin* | *-*-mingw* | *-*-os2*)
       # It is impossible to link a dll without this setting, and
@@ -802,8 +808,8 @@ compiler."
       allow_undefined=yes
       ;;
     esac
-    compile_command="$CC"
+    compile_command="$nonopt"
-    finalize_command="$CC"
+    finalize_command="$nonopt"
 
     compile_rpath=
     finalize_rpath=
@@ -1851,7 +1857,7 @@ compiler."
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $C_compiler -o conftest conftest.c $deplibs
+	  $CC -o conftest conftest.c $deplibs
 	  if test $? -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
@@ -1884,7 +1890,7 @@ EOF
 	     # If $name is empty we are operating on a -L argument.
 	      if test "$name" != "" ; then
 		$rm conftest
-		$C_compiler -o conftest conftest.c $i
+		$CC -o conftest conftest.c $i
 		# Did it work?
 		if test $? -eq 0 ; then
 		  ldd_output=`ldd conftest`
@@ -2047,12 +2053,19 @@ EOF
 	done
 
 	# Ensure that we have .o objects for linkers which dislike .lo
-	# (e.g. aix) incase we are running --disable-static
+	# (e.g. aix) in case we are running --disable-static
 	for obj in $libobjs; do
-	  oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"`
+	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	  if test ! -f $oldobj; then
+	  if test "X$xdir" = "X$obj"; then
-	    $show "${LN_S} $obj $oldobj"
+	    xdir="."
-	    $run ${LN_S} $obj $oldobj || exit $?
+	  else
+	    xdir="$xdir"
+	  fi
+	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	  if test ! -f $xdir/$oldobj; then
+	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
 	  fi
 	done
 
@@ -2311,8 +2324,16 @@ EOF
 	# Just create a symlink.
 	$show $rm $libobj
 	$run $rm $libobj
-	$show "$LN_S $obj $libobj"
+	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	$run $LN_S $obj $libobj || exit $?
+	if test "X$xdir" = "X$libobj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
       fi
 
       if test -n "$gentop"; then
@@ -2598,16 +2619,21 @@ static const void *lt_preloaded_setup() {
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*)
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    case "$compile_command " in
 	    *" -static "*) ;;
 	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
 	    esac
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
@@ -2776,7 +2802,7 @@ sed_quote_subst='$sed_quote_subst'
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
 
 relink_command=\"$relink_command\"
 
@@ -2865,7 +2891,7 @@ else
   fi"
 	else
 	  echo >> $output "\
-  program='$outputname$exeext'
+  program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
 	fi
@@ -2995,14 +3021,21 @@ fi\
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
 	eval cmds=\"$old_archive_from_new_cmds\"
       else
-	# Ensure that we have .o objects in place incase we decided
+	# Ensure that we have .o objects in place in case we decided
 	# not to build a shared library, and have fallen back to building
 	# static libs even though --disable-static was passed!
 	for oldobj in $oldobjs; do
 	  if test ! -f $oldobj; then
-	    obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"`
+	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-	    $show "${LN_S} $obj $oldobj"
+	    if test "X$xdir" = "X$oldobj"; then
-	    $run ${LN_S} $obj $oldobj || exit $?
+	      xdir="."
+	    else
+	      xdir="$xdir"
+	    fi
+	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
 	  fi
 	done
 
@@ -3288,8 +3321,8 @@ libdir='$install_libdir'\
 	  shift
 
 	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$realname $destdir/$realname"
+	  $show "$install_prog$stripme $dir/$realname $destdir/$realname"
-	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+	  $run eval "$install_prog$stripme $dir/$realname $destdir/$realname" || exit $?
 
 	  if test $# -gt 0; then
 	    # Delete the old symlinks, and create new ones.
@@ -3672,8 +3705,10 @@ libdir='$install_libdir'\
     done
 
     if test -z "$run"; then
-      # Export the shlibpath_var.
+      if test -n "$shlibpath_var"; then
-      eval "export $shlibpath_var"
+        # Export the shlibpath_var.
+        eval "export $shlibpath_var"
+      fi
 
       # Restore saved enviroment variables
       if test "${save_LC_ALL+set}" = set; then
@@ -3690,8 +3725,10 @@ libdir='$install_libdir'\
       exit 1
     else
       # Display what would be done.
-      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+      if test -n "$shlibpath_var"; then
-      $echo "export $shlibpath_var"
+        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+        $echo "export $shlibpath_var"
+      fi
       $echo "$cmd$args"
       exit 0
     fi